BINOL-Based Chiral Macrocycles and Cages

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1'-binaphthyl-2,2'-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

A novel porphyrin MOF catalyst for efficient conversion of CO2 with propargyl amines

The capture and conversion of carbon dioxide (CO2) into valuable chemical products under mild conditions is an important and challenging approach for contemporary industry. Carboxylic acid ligands are widely used in the development of functionalized metal organic framework materials due to their excellent stability. Herein, a novel mixed-metal organic framework Cu-TCPP(Fe) was assembled from iron-(Fe)-porphyrin ligands, which can efficiently catalyze the reaction of propargylic amines and CO2 to synthesize 2-oxazolidinones.

Highly Efficient Thiolate-Based Ionic Liquid Catalysts for Reduction of CO2: Selective N-Functionalization of Amines to Form N-Formamides and N-Methylamines

Developing efficient catalysts to convert CO2 into value-added chemicals is valuable for reducing carbon emissions. Herein, a kind of novel thiolate-based ionic liquid with sulfur as the active site was designed and synthesized, which served as highly efficient catalyst for the reductive N-functionalization of CO2 by amines and hydrosilane. By adjusting the CO2 pressure, various N-formamides and N-methylamines were selectively obtained in high yields. Remarkably, at the catalyst loading of 0.1 mol %, the N-formylation reaction of N-methylaniline exhibited an impressive turnover frequency (TOF) up to 600 h-1, which could be attributed to the roles of the ionic liquids in activating hydrosilane and amine. In addition, control experiments and NMR monitoring experiments provided evidence that the reduction of CO2 by hydrosilane yielded formoxysilane intermediates that subsequently reacted with amines to form N-formylated products. Alternatively, the formoxysilane intermediates could further react with hydrosilane and amine to produce 4-electron-reduced aminal products. These aminal products served as crucial intermediates in the N-methylation reactions.

Synthesis of Enamines, Aldehydes, and Nitriles from CO2: Scope of the One-Pot Strategy via Formamides

Tetrabutylammonium acetate (TBAA) and Cu(OAc)2 worked as a binary catalytic system for the solvent-free N-formylation of amines with CO2 and PhSiH3. This catalysis making C-H and C-N bonds with CO2 was coupled with the C-C bond-forming reactions to achieve the one-pot synthesis of enamines, aldehydes, and nitriles. The X-ray crystal structure of a Cu(OAc)2-TBAA complex was also revealed.

One-step synthesis of nitrogen-rich organic polymers for efficient catalysis of CO2 cycloaddition

Nitrogen-rich organic polymer poly(chloride triazole) (PCTs) was synthesized by a one-step method as metal-halogen-free heterogeneous catalyst for the solvent-free CO2 cycloaddition. PCTs had abundant nitrogen sites and hydrogen bond donors, exhibited great activity for the cycloaddition of CO2 and epichlorohydrin, and achieved 99.6% yield of chloropropene carbonate under the conditions of 110 ℃, 6 h, and 0.5 MPa CO2. The activation of epoxides and CO2 by hydrogen bond donor and nitrogen sites was further explained by density functional theory (DFT) calculations. In summary, this study showed that nitrogen-rich organic polymer is a versatile platform for CO2 cycloaddition, and this paper provides a reference for the design of CO2 cycloaddition catalysts.

One-Pot Synthesis of Dihydropyrans via CO2 Reduction and Domino Knoevenagel/oxa-Diels-Alder Reactions

Catalytic CO₂ reduction with phenylsilane under solvent-free conditions was linked with the one-pot synthesis of 3,4-dihydropyrans from β-dicarbonyl compounds and styrenes. The synthesis includes three processes: (1) bis(silyl)acetal formation from CO₂ and phenylsilane and a domino reaction of (2) Knoevenagel condensation and (3) inverse-electron-demand oxa-Diels-Alder reaction. The first process was catalyzed by a pentanuclear Zn^II complex (0.07 mol %) to generate bis(silyl)acetals, which were hydrolyzed into formaldehyde to be used in the second step.

Advancements and Challenges in Reductive Conversion of Carbon Dioxide via Thermo-/Photocatalysis

Carbon dioxide (CO₂) is the major greenhouse gas and also an abundant and renewable carbon resource. Therefore, its chemical conversion and utilization are of great attraction for sustainable development. Especially, reductive conversion of CO₂ with energy input has become a current hotspot due to its ability to access fuels and various important chemicals. Nowadays, the controllable CO₂ hydrogenation to formic acid and alcohols using sustainable H₂ resources has been regarded as an appealing solution to hydrogen storage and CO₂ accumulation. In addition, photocatalytic CO₂ reduction to CO also provides a potential way to utilize this greenhouse gas efficiently. Besides direct CO₂ hydrogenation, CO₂ reductive functionalization integrates CO₂ reduction with subsequent C-X (X = N, S, C, O) bond formation and indirect transformation strategies, enlarging the diverse products derived from CO₂ and promoting CO₂ reductive conversion into a new stage. In this Perspective, the progress and challenges of CO₂ reductive conversion, including hydrogenation, reductive functionalization, photocatalytic reduction, and photocatalytic reductive functionalization are summarized and discussed along with the key issues and future trends/directions in this field. We hope this Perspective can evoke intense interest and inspire much innovation in the promise of CO₂ valorization.

Tetra-Coordinated Boron-Functionalized Phenanthroimidazole-Based Zinc Salen as a Photocatalyst for the Cycloaddition of CO2 and Epoxides

A unique B-N coordinated phenanthroimidazole-based zinc salen was synthesized. The zinc salen thus synthesized acts as a photocatalyst for the cycloaddition of carbon dioxide with terminal epoxides under ambient conditions. DFT study of the cycloaddition of carbon dioxide with terminal epoxide indicates the preference of the reaction pathway when photocatalyzed by zinc salen. We anticipate that this strategy will help to design new photocatalysts for CO₂ fixation.

Basically, nucleophilicity matters little: towards unravelling the supramolecular driving forces in enzyme-like CO2 conversion

The reaction mechanism for the cycloaddition of CO₂ to styrene oxide in the presence of macrocyclic pseudopeptides has been studied using DFT methods. Computational calculations indicate that the unprecedented catalytic behaviour previously observed experimentally, in which the most reactive species was not the most nucleophilic but the most basic one, can be associated to the tight cooperativity between several supramolecular interactions promoted by simple peptidomimetics able to display a synzymatic behaviour. This bizarre catalytic performance afforded remarkable conversions of a sluggish substrate like styrene oxide into the desired cyclic carbonate, even under relatively mild reaction conditions, opening the way for the practical use of CO₂ as a raw material in the preparation of valuable chemicals. Furthermore, the remote modification of essential structural features of the macrocycle (synzyme engineering) permitted the driving forces of the synzymatic system to be analyzed, stressing the crucial synergic effect between an elegantly preorganized oxyanion hole and additional aromatic interactions.

Efficient synthesis of cyclic carbonates from CO2 under ambient conditions over Zn(betaine)2Br2: experimental and theoretical studies

It is very interesting to synthesize high value-added chemicals from CO₂ under mild conditions with low energy consumption. Here, we report that a novel catalyst, Zn(betaine)₂Br₂, can efficiently promote the cycloaddition of CO₂ with epoxides to synthesize cyclic carbonates under ambient conditions (30 °C, 1 atm). DFT calculations provide important insights into the mechanism, particularly the unusual synergistic catalytic action of Zn²⁺, Br^- and NR⁴⁺, which is the critical factor for the outstanding performance of Zn(betaine)₂Br₂. The unique features of the catalyst are that it is cheap, green and very easy to prepare.

Effect of the proximal secondary sphere on the self-assembly of tetrahedral zinc-oxo clusters

Metal-oxo clusters can serve as directional and rigid building units of coordination and noncovalent supramolecular assemblies. Therefore, an in-depth understanding of their multi-faceted chemistry is vital for the development of self-assembled solid-state structures of desired properties. Here we present a comprehensive comparative structural analysis of isostructural benzoate, benzamidate, and new benzamidinate zinc-oxo clusters incorporating the [O,O]-, [O,NH]- and [NH,NH]-anchoring donor centers, respectively. We demonstrated that the NH groups in the proximal secondary coordination sphere are prone to the formation of intermolecular hydrogen bonds, which affects the packing of clusters in the crystal structure. Coordination sphere engineering can lead to the rational design of new catalytic sites and novel molecular building units of supramolecular assemblies.

C-Methylenation of anilines and indoles with CO2 and hydrosilane using a pentanuclear zinc complex catalyst

The one-step C-methylenation of anilines and indoles with CO2 and phenylsilane was catalyzed by a pentanuclear ZnII complex to give diarylmethanes via geminal C-H and C-C bond formation. It is proposed that the zinc-hydride complex generated in situ is a catalytically active species and that bis(silyl)acetal is a key intermediate. When aniline was used as a substrate, both the C-methylenation and N-methylation proceeded.

Mesoporous Silica-Supported Ionic Liquids as Catalysts for Styrene Carbonate Synthesis from CO2

Various types of mesoporous silica were used as carriers to synthesize a series of immobilized imidazolium-based ionic liquids. Their activity was tested in the synthesis of styrene carbonate from CO2 and styrene. This is one-pot process, whereby two stages are carried out in one reactor and there is no need to isolate the intermediate product, epoxide. A systematic study on the influence of parameters such as temperature, the reaction time, CO2 pressure, as well as the amount and type of catalyst used was carried out. A strong synergistic catalytic effect of ionic liquid and Lewis acid was observed in promoting this reaction. The addition sequence of regents and amount of immobilized catalyst were considered crucial for the synthesis of styrene carbonate from CO2 and styrene. The tested silica-supported ionic liquids gave an easily-recyclable system which under the most favorable conditions ([mtespim]Cl/@SiO2; ZnBr2, 0.1 mol%; 110 °C, 4 h, 1 MPa) can be reused without a significant loss of catalytic activity nor selectivity.

Minimization of Amounts of Catalyst and Solvent in NHC-Catalyzed Benzoin Reactions of Solid Aldehydes: Mechanistic Consideration of Solid-to-Solid Conversion and Total Synthesis of Isodarparvinol B

Attempts were made to minimize the amounts of catalyst and solvent in the NHC-catalyzed benzoin reactions of solid aldehydes. In some case, solid-to-solid conversions proceeded in the solvent-free NHC-catalyzed benzoin reactions. Even if a mixture of the substrate, N-heterocyclic carbene (NHC) precursor, and inorganic base was initially a powdery solid, the reaction did proceed at reaction temperature lower than the melting points of each compound. The solid mixture partially melted or became a slurry or suspension in the meantime. We call this solid/liquid mixture a semisolid state. The reaction giving an optically active product was faster than that giving a racemic mixture of the same product. Melting-point depression was observed for a series of mixtures of the substrate and product in different substrate/product ratios. Solvent-free solid-to-solid conversions were accelerated by the formation of a semisolid state resulting from the melting-point depression of the solid substrate accompanied by the product formation. In the case of solid substrates with high melting points, melting-point depression was useless, and the addition of a small amount of solvent was needed. The first total synthesis of isodarparvinol B was achieved via the NHC-catalyzed intramolecular benzoin reaction using a small amount of solvent as an additive.

Synthesis of silyl formates, formamides, and aldehydes via solvent-free organocatalytic hydrosilylation of CO2

Carbon dioxide (CO2) was used as a C1 source to prepare silyl formates, formamides, and aldehydes. Tetrabutylammonium acetate (TBAA) catalyzed the solvent-free N-formylation of amines with CO2 and hydrosilane to give formamides including Weinreb formamide, Me(MeO)NCHO, which was successively converted into aldehydes by one-pot reactions with Grignard reagents.

Macrocyclic multinuclear metal complexes acting as catalysts for organic synthesis

Recent progress in homogeneous catalysis with macrocyclic multinuclear metal complexes (categories A–C) is overviewed.