Novel Benzothiadiazole-based Donor-Acceptor Systems: Synthesis, Ultrafast Charge Transfer and Separation Dynamics

Near-infrared (NIR) absorbing electron donor-acceptor (D-A) chromophores have been at the forefront of current energy research owing to their facile charge transfer (CT) characteristics, which are primitive for photovoltaic applications. Herein, we have designed and developed a new set of benzothiadiazole (BTD)-based tetracyanobutadiene (TCBD)/dicyanoquinodimethane (DCNQ)-embedded multimodular D-A systems (BTD1-BTD6) and investigated their inherent photo-electro-chemical responses for the first time having identical and mixed terminal donors of variable donicity. Apart from poor luminescence, the appearance of broad low-lying optical transitions extendable even in the NIR region (>1000 nm), particularly in the presence of the auxiliary acceptors, are indicative of underlying nonradiative excited state processes leading to robust intramolecular CT and subsequent charge separation (CS) processes in these D-A constructs. While electrochemical studies identify the moieties involved in these photo-events, orbital delocalization and consequent evidence for the low-energy CT transitions have been achieved from theoretical calculations. Finally, the spectral and temporal responses of different photoproducts are obtained from femtosecond transient absorption studies, which, coupled with spectroelectrochemical data, identify broad NIR signals as CS states of the compounds. All the systems are found to be susceptible to ultrafast (~ps) CT and CS before carrier recombination to the ground state, which is, however, significantly facilitated after incorporation of the secondary TCBD/DCNQ acceptors, leading to faster and thus efficient CT processes, particularly in polar solvents. These findings, including facile CT/CS and broad and intense panchromatic absorption over a wide window of the electromagnetic spectrum, are likely to expand the horizons of BTD-based multimodular CT systems to revolutionize the realm of solar energy conversion and associated photonic applications.

Polymer Fiber Rigid Network with High Glass Transition Temperature Reinforces Stability of Organic Photovoltaics

Organic photovoltaics (OPVs) need to overcome limitations such as insufficient thermal stability to be commercialized. The reported approaches to improve stability either rely on the development of new materials or on tailoring the donor/acceptor morphology, however, exhibiting limited applicability. Therefore, it is timely to develop an easy method to enhance thermal stability without having to develop new donor/acceptor materials or donor-acceptor compatibilizers, or by introducing another third component. Herein, a unique approach is presented, based on constructing a polymer fiber rigid network with a high glass transition temperature (Tg) to impede the movement of acceptor and donor molecules, to immobilize the active layer morphology, and thereby to improve thermal stability. A high-Tg one-dimensional aramid nanofiber (ANF) is utilized for network construction. Inverted OPVs with ANF network yield superior thermal stability compared to the ANF-free counterpart. The ANF network-incorporated active layer demonstrates significantly more stable morphology than the ANF-free counterpart, thereby leaving fundamental processes such as charge separation, transport, and collection, determining the device efficiency, largely unaltered. This strategy is also successfully applied to other photovoltaic systems. The strategy of incorporating a polymer fiber rigid network with high Tg offers a distinct perspective addressing the challenge of thermal instability with simplicity and universality.

Balancing Flexible Side Chains on 2D Conjugated Acceptors Enables High-Performance Organic Solar Cell

Balancing the rigid backbones and flexible side chains of light-harvesting materials is crucially important to reach optimized intermolecular packing, micromorphology, and thus photovoltaic performance of organic solar cells (OSCs). Herein, based on a distinctive CH-series acceptor platform with 2D conjugation extended backbones, a series of nonfullerene acceptors (CH-6F-Cn) are synthesized by delicately tuning the lengths of flexible side chains from n-octyl to n-amyl. A systemic investigation has revealed that the variation of the side chain's length can not only modulate intermolecular packing modes and crystallinity but also dramatically improve the micromorphology of the active layer and eventual photovoltaic parameters of OSCs. Consequently, the highest PCE of 18.73% can be achieved by OSCs employing D18:PM6:CH-6F-C8 as light-harvesting materials.

Three-in-One Strategy Enables Single-Component Organic Solar Cells with Record Efficiency and High Stability

Single-component organic solar cells (SCOSCs) with covalently bonding donor and acceptor are becoming increasingly attractive because of their superior stability over traditional multicomponent blend organic solar cells (OSCs). Nevertheless, the efficiency of SCOSCs is far behind the state-of-the-art multicomponent OSCs. Herein, by combination of the advantages of three-component and single-component devices, this work reports an innovative three-in-one strategy to boost the performance of SCOSCs. In this three-in-one strategy, three independent components (PM6, D18, and PYIT) are covalently linked together to create a new single-component active layer based on ternary conjugated block copolymer (TCBC) PM6-D18-b-PYIT by a facile polymerization. Precisely manipulating the component ratios in the polymer chains of PM6-D18-b-PYIT is able to broaden light utilization, promote charge dynamics, optimize, and stabilize film morphology, contributing to the simultaneously enhanced efficiency and stability of the SCOSCs. Ultimately, the PM6-D18-b-PYIT-based device exhibits a power conversion efficiency (PCE) of 14.89%, which is the highest efficiency of the reported SCOSCs. Thanks to the aggregation restriction of each component and chain entanglement in the three-in-one system, the PM6-D18-b-PYIT-based SCOSC displays significantly higher stability than the corresponding two-component (PM6-D18:PYIT) and three-component (PM6:D18:PYIT). These results demonstrate that the three-in-one strategy is facile and promising for developing SCOSCs with superior efficiency and stability.

Recent advances in supramolecular fullerene chemistry

Fullerene chemistry has come a long way since 1990, when the first bulk production of C60 was reported. In the past decade, progress in supramolecular chemistry has opened some remarkable and previously unexpected opportunities regarding the selective (multiple) functionalization of fullerenes and their (self)assembly into larger structures and frameworks. The purpose of this review article is to provide a comprehensive overview of these recent developments. We describe how macrocycles and cages that bind strongly to C60 can be used to block undesired addition patterns and thus allow the selective preparation of single-isomer addition products. We also discuss how the emergence of highly shape-persistent macrocycles has opened opportunities for the study of photoactive fullerene dyads and triads as well as the preparation of mechanically interlocked compounds. The preparation of two- or three-dimensional fullerene materials is another research area that has seen remarkable progress over the past few years. Due to the rapidly decreasing price of C60 and C70, we believe that these achievements will translate into all fields where fullerenes have traditionally (third-generation solar cells) and more recently been applied (catalysis, spintronics).

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18 % Efficiency Realized by Incorporating a Linker Dimerized Acceptor

The wearable application of flexible organic solar cells (f-OSCs) necessitates high power conversion efficiency (PCE) and mechanical robustness. However, photoactive films based on efficient non-fullerene small molecule acceptors (NF-SMAs) are typically brittle, leading to poor mechanical stability in devices. In this study, we achieved a remarkable PCE of 18.06 % in f-OSCs while maintaining ultrahigh mechanical robustness (with a crack-onset strain (COS) of higher than 11 %) by incorporating a linker dimerized acceptor (DOY-TVT). Compared to binary blends, ternary systems exhibit reduced non-radiative recombination, suppressed crystallization and diffusion of NF-SMAs, and improved load distribution across the chain networks, enabling the dissipation of the load energy. Thus, the ternary f-OSCs developed in this study achieved, high PCE and stability, surpassing binary OSCs. Moreover, the developed f-OSCs retained 97 % of the initial PCE even after 3000 bending cycles, indicating excellent mechanical stability (9.1 % higher than binary systems). Furthermore, the rigid device with inverted structure based on the optimal active layer exhibited a substantial increase in efficiency retention, with 89.6 % after 865 h at 85 °C and 93 % after more than 1300 h of shelf storage at 25 °C. These findings highlight the potential of the linker oligomer acceptor for realizing high-performing f-OSCs with ultrahigh mechanical robustness.

Regulating the Sequence Structure of Conjugated Block Copolymers Enables Large-Area Single-Component Organic Solar Cells with High Efficiency and Stability

Single-component organic solar cells (SCOSCs) based on conjugated block copolymers (CBCs) by covalently bonding a polymer donor and polymer acceptor become more and more appealing due to the formation of a favorable and stable morphology. Unfortunately, a deep understanding of the effect of the assembly behavior caused by the sequence structure of CBCs on the device performance is still missing. Herein, from the aspect of manipulating the sequence length and distribution regularity of CBCs, we synthesized a series of new CBCs, namely D18(20)-b-PYIT, D18(40)-b-PYIT and D18(60)-b-PYIT by two-pot polymerization, and D18(40)-b-PYIT(r) by traditional one-pot method. It is observed that precise manipulation of sequence length and distribution regularity of the polymer blocks fine-tunes the self-assembly of the CBCs, optimizes film morphology, improves optoelectronic properties, and reduces energy loss, leading to simultaneously improved efficiency and stability. Among these CBCs, the D18(40)-b-PYIT-based device achieves a high efficiency of 13.4 % with enhanced stability, which is an outstanding performance among SCOSCs. Importantly, the regular sequence distribution and suitable sequence length of the CBCs enable a facile film-forming process of the printed device. For the first time, the blade-coated large-area rigid/flexible SCOSCs are fabricated, delivering an impressive efficiency of 11.62 %/10.73 %, much higher than their corresponding binary devices.

Molecular Donor-Acceptor Dyads for Single-Material Organic Solar Cells

A series of ambipolar covalently linked oligothiophene-fullerene dyads have been synthesized by systematical structural variations. In this respect, the length of linker between donor and acceptor unit was altered and in a second series the terminal acceptor units in the donor unit of the dyads were varied. Characterization of the optical and redox properties gave valuable structure-property relationships and were correlated to the photovoltaic performance in single-material organic solar cells, in which power conversion efficiencies of up to 4.3 % were reached.

Desirable Uniformity and Reproducibility of Electron Transport in Single-Component Organic Solar Cells

Despite the simplified fabrication process and desirable microstructural stability, the limited charge transport properties of block copolymers and double-cable conjugated polymers hinder the overall performance of single-component photovoltaic devices. Based on the key distinction in the donor (D)-acceptor (A) bonding patterns between single-component and bulk heterojunction (BHJ) devices, rationalizing the difference between the transport mechanisms is crucial to understanding the structure-property correlation. Herein, the barrier formed between the D-A covalent bond that hinders electron transport in a series of single-component photovoltaic devices is investigated. The electron transport in block copolymer-based devices is strongly dependent on the electric field. However, these devices demonstrate exceptional advantages with respect to the charge transport properties, involving high stability to compositional variations, improved film uniformity, and device reproducibility. This work not only illustrates the specific charge transport behavior in block copolymer-based devices but also clarifies the enormous commercial viability of large-area single-component organic solar cells (SCOSCs).

Molecular Oligothiophene-Fullerene Dyad Reaching Over 5% Efficiency in Single-Material Organic Solar Cells

A novel donor-acceptor dyad, 4, in which the conjugated oligothiophene donor is covalently connected to fullerene PC₇₁ BM by a flexible alkyl ester linker, is synthesized and applied as photoactive layer in solution-processed single-material organic solar cells (SMOSCs). Excellent photovoltaic performance, including a high short-circuit current density (J_SC ) of 13.56 mA cm^-2 , is achieved, leading to a power conversion efficiency of 5.34% in an inverted cell architecture, which is substantially increased compared to other molecular single materials. Furthermore, dyad 4-based SMOSCs display excellent stability maintaining 96% of the initial performance after 750 h (one month) of continuous illumination and operation under simulated AM 1.5G irradiation. These results will strengthen the rational molecular design to further develop SMOSCs for potential industrial application.

Impact of the segment ratio on a donor-acceptor all-conjugated block copolymer in single-component organic solar cells

The development of single-component organic solar cells (SCOSCs) using only one photoactive component with a chemically bonded D/A structure has attracted increasing research attention in recent years. At represent, most relevant studies focus on comparing the performance difference between a donor-acceptor (D-A) conjugated block copolymer (CBC) and the commensurate blending systems based on the same donor and acceptor segments, and still there are no reports on the impact of the segment ratio for a certain D-A CBC on the resultant photovoltaic performance. In this study, we synthesized a D-A all-conjugated polymers based on an n-type PNDI2T block and a p-type PBDB-T donor block but with three different segment ratios (P1-P3) and demonstrate the significance of the D/A segment ratio on photovoltaic performance. Our results reveal that the n-type PNDI2T block plays a more critical role in the inter/intra-chain charge transfer. P1 with a higher content of PNDI2T delivers superior exciton dissociation and charge transfer behavior than P2 and P3, benefitting from its more balanced hole/electron mobility. In addition, a higher packing regularity associated with a more dominant face-on orientation is also observed for P1. As a result, SCOSC based on P1 exhibits the highest PCE among the synthesized CBCs. It also possesses a minimal energy loss due to the better suppressed non-radiative recombination loss. This work provides the first discussion of the impact of the segment ratio for a D-A all-conjugated block copolymer and signifies the critical role of the n-type segment in designing high-performance single-component CBCs.

The role of entropy gains in the exciton separation in organic solar cells

In organic solar cell (OSC), the lower dielectric constant of organic semiconductor material induces a strong Coulomb attraction between electron-hole pairs, which leads to a low exciton separation efficiency, especially the charge transfer (CT) state. The CT state formed at the electron-donor (D) and electron-acceptor (A) interface is regarded as an unfavorable property of organic photovoltaic devices. Since the OSC works in a nonzero temperature condition, the entropy effect would be one of the main reasons to overcome the Coulomb energy barrier and must be taken into account. In this review, we review the present understanding of the entropy-driven charge separation and describe how factors such as the dimensionality of the organic semiconductor, energy disorder effect, the morphology of the active layer, and the nonequilibrium effect affect the entropy contribution in compensating the Coulomb dissociation barrier for CT exciton separation and charge generation process. We focus on the investigation of the entropy effect on exciton dissociation mechanism from both theoretical and experimental aspects, which provides pathways for understanding the underlying mechanisms of exciton separation and further enhancing the efficiency of OSCs. This article is protected by copyright. All rights reserved.

Synthesis, Structure, and Significant Energy Gap Modulation of Symmetrical Silafluorene-Cored Tetracyanobutadiene and Tetracyanoquinodimethane Derivatives

A series of symmetrical tetracyanobutadiene and tetracyanoquinodimethane derivatives with a D-A-D'-A-D structural configuration and silafluorene core (D') were designed and readily synthesized via a [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction. We found that the photophysical properties and HOMO and LUMO energy levels and gaps of the silafluorene derivatives could be profoundly remolded through CA-RE reactions and modulated by varying the peripheral donor units from phenyl, m-dimethoxyphenyl, and N,N-dimethylaniline to triphenylamine groups. After CA-RE reactions, the HOMO-LUMO gaps of 1a-1j are in the range of 1.75-2.78 eV, with significant decreases of 0.52-1.46 eV compared to those of the parent silafluorene compounds 2a-2j. The intriguing crystal structures of 1f and 1j were analyzed and elucidated to show their unique potential porosity. The stability, electrochemical, and computational studies were systematically performed to unveil the reshaped electron-donating and -withdrawing nature in one molecular system. 1h-1j with peripherally strong amino donors exhibit an intense and broad intramolecular charge transfer absorption band in the near-infrared region from 550 to 900 nm. The molecular design and synthesis reported here broaden the types and fields of D-A molecular systems for potential applications in organic optoelectronic devices.

Polymer solar cells made with photocrosslinkable conjugated donor–acceptor block copolymers: improvement in the thermal stability and morphology with a single-component active layer

New photocrosslinkable conjugated donor–acceptor block copolymer bearing oxetane side chains is synthesized by one-pot polymerization to improve the thermal and morphological properties.

Fullerene-Based Triads with Controlled Alkyl Spacer Length as Photoactive Materials for Single-Component Organic Solar Cells

Two kinds of dumbbell-shaped acceptor-donor-acceptor (A-D-A)-type triad single-component (SC) photovoltaic molecules based on a benzodithiophene-rhodanine (BDTRh) core and [6,6]-phenyl-C₆₁ butyric acid (PC₆₁BA) termini, BDTRh-C₂-PC₆₁BA and BDTRh-C₁₀-PC₆₁BA, were synthesized by modulating the alkyl (C2 and C10) spacer lengths. Both SC photovoltaic structures had similar UV-vis spectra in solution, but BDTRh-C₁₀-PC₆₁BA showed a significantly higher absorption coefficient as a thin film. In films, a more facile intermolecular photo-induced charge transfer was observed for BDTRh-C₁₀-PC₆₁BA in the broad-band transient absorption measurements. BDTRh-C₁₀-PC₆₁BA also exhibited a higher hole mobility (by 25 times) and less bimolecular recombination than BDTRh-C₂-PC₆₁BA. By plotting the normalized external quantum efficiency data, a higher charge-transfer state was measured for BDTRh-C₁₀-PC₆₁BA, reducing its voltage loss. A higher power conversion efficiency of ∼2% was obtained for BDTRh-C₁₀-PC₆₁BA, showing higher open-circuit voltage, short-circuit current density, and fill factor than those of BDTRh-C₂-PC₆₁BA devices. The different carrier dynamics, voltage loss, and optical and photoelectrical characteristics depending on the spacer length were interpreted in terms of the film morphology. The longer decyl spacer in BDTRh-C₁₀-PC₆₁BA afforded a significantly enhanced intermolecular ordering of the p-type core compared to BDTRh-C₂-PC₆₁BA, suggesting that the alkyl spacer length plays a critical role in controlling the intermolecular packing interaction.

Narrow-Bandgap Single-Component Polymer Solar Cells with Approaching 9% Efficiency

Two narrow-bandgap block conjugated polymers with a (D1-A1)-(D2-A2) backbone architecture, namely PBDB-T-b-PIDIC2T and PBDB-T-b-PTY6, are designed and synthesized for single-component organic solar cells (SCOSCs). Both polymers contain same donor polymer, PBDB-T, but different polymerized nonfullerene molecule acceptors. Compared to all previously reported materials for SCOSCs, PBDB-T-b-PIDIC2T and PBDB-T-b-PTY6 exhibit narrower bandgap for better light harvesting. When incorporated into SCOSCs, the short-circuit current density (J_sc ) is significantly improved to over 15 mA cm^-2 , together with a record-high power conversion efficiency (PCE) of 8.64%. Moreover, these block copolymers exhibit low energy loss due to high charge transfer (CT) states (E_ct ) plus small non-radiative loss (0.26 eV), and improved stability under both ambient condition and continuous 80 °C thermal stresses for over 1000 h. Determination of the charge carrier dynamics and film morphology in these SCOSCs reveals increased carrier recombination, relative to binary bulk-heterojunction devices, which is mainly due to reduced ordering of both donor and acceptor fragments. The close structural relationship between block polymers and their binary counterparts also provides an excellent framework to explore further molecular features that impact the photovoltaic performance and boost the state-of-the-art efficiency of SCOSCs.

Double-Cable Conjugated Polymers with Pendant Rylene Diimides for Single-Component Organic Solar Cells

ConspectusConjugated polymers for application in organic solar cells (OSCs) have been developed from poly(phenylenevinylene) to poly(3-hexylthiophene) and then to "donor-acceptor" structures, providing power conversion efficiencies (PCEs) over 18% when blending with the electron acceptor as a two-component photoactive layer. Besides, graft-structural double-cable conjugated polymers that use an electron donor as conjugated backbones and an electron acceptor as pendant side units are one kind of conjugated polymer, in which charge carriers are generated in a single polymer. Therefore, double-cable conjugated polymers can be used as a single photoactive layer in single-component OSCs (SCOSCs). The covalently linked electron donor and acceptor enable double-cable polymers to maintain stable microstructures during long-term operation compared to two-component systems, which is very important for OSCs toward large-area applications. However, SCOSCs based on double-cable conjugated polymers provided PCEs below 3% in a long period, which is lagging far behind PCEs of two-component OSCs. The key reason for this is the limited number of chemical structures and the difficulty to tune the morphology in these polymers.In this Account, we provide an overview about our efforts on developing new double-cable conjugated polymers with rylene diimides as side units, and how to realize high PCEs in SCOSC devices. The studies start from developing a "functionalization-polymerization" method to synthesize the polymers containing rylene diimide acceptors, so that large amounts of double-cable conjugated polymers with distinct physical and electrochemical properties were obtained. Then, we will discuss how to control the nanophase separation in the crystalline region and optimize the miscibility in the amorphous region of double-cable polymers, simultaneously facilitating exciton dissociation and charge transport. With these efforts, a high PCE of 8.4% has been obtained, representing the record PCE in SCOSCs. In addition, the physical process and the stability of SCOSCs will be discussed. We hope that this account will inspire many innovative studies in this field and push the PCEs of SCOSCs to a new stage.

[2 + 1] Cycloaddition reactions of fullerene C60 based on diazo compounds

The most common variant of fullerene core functionalization is the [2 + 1] cycloaddition process. Of these, reactions leading to methanofullerenes are the most promising. They are synthesized in two main reactions: nucleophilic cyclopropanation according to the Bingel method and thermal addition of diazo compounds. This present review summarizes the material on the synthesis of monofunctionalized methanofullerenes - analogues of [60]PCBM - based on various diazo compounds. The main cyclopropanating agents for the synthesis of monosubstituted methanofullerenes, the optimal conditions and the mechanism of the [2 + 1] cycloaddition, as well as the practical application of the target products are analyzed.

Excited state dynamics and exciton diffusion in triphenylamine/dicyanovinyl push-pull small molecule for organic optoelectronics

Triphenylamine-based small push–pull molecules have recently attracted substantial research attention due to their unique optoelectronic properties. Here, we investigate the excited state de-excitation dynamics and exciton diffusion in TPA-T-DCV-Ph-F small molecule, having simple chemical structure with asymmetrical architecture and end-capped with electron-withdrawing p-fluorodicyanovinyl group. The excited state lifetime in diluted solutions (0.04 ns in toluene and 0.4 ns in chloroform) are found to be surprisingly shorter compared to the solid state (3 ns in PMMA matrix). Time-dependent density functional theory indicates that this behavior originates from non-radiative relaxation of the excited state through a conical intersection between the ground and singlet excited state potential energy surfaces. Exciton diffusion length of ~ 16 nm in solution processed films was retrieved by employing time-resolved photoluminescence volume quenching measurements with Monte Carlo simulations. As means of investigating the device performance of TPA-T-DCV-Ph-F, we manufactured solution and vacuum processed bulk heterojunction solar cells that yielded efficiencies of ~ 1.5% and ~ 3.7%, respectively. Our findings demonstrate that the short lifetime in solutions does not hinder per se long exciton diffusion length in films thereby granting applications of TPA-T-DCV-Ph-F and similar push–pull molecules in vacuum and solution processable devices.

Progress in Materials, Solution Processes, and Long-Term Stability for Large-Area Organic Photovoltaics

Organic solar cells based on bulk heterojunctions (BHJs) are attractive energy-conversion devices that can generate electricity from absorbed sunlight by dissociating excitons and collecting charge carriers. Recent breakthroughs attained by development of nonfullerene acceptors result in significant enhancement in power conversion efficiency (PCEs) exceeding 17%. However, most of researches have focused on pursuing high efficiency of small-area (<1 cm² ) unit cells fabricated usually with spin coating. For practical application of organic photovoltaics (OPVs) from lab-scale unit cells to industrial products, it is essential to develop efficient technologies that can extend active area of devices with minimized loss of performance and ensured operational stability. In this progress report, an overview of recent advancements in materials and processing technologies is provided for transitioning from small-area laboratory-scale devices to large-area industrial scale modules. First, development of materials that satisfy requirements of high tolerability in active layer thickness and large-area adaptability is introduced. Second, morphology control using various coating techniques in a large active area is discussed. Third, the recent research progress is also underlined for understanding mechanisms of OPV degradation and studies for improving device long-term stability along with reliable evaluation procedures.

Miscibility-Controlled Phase Separation in Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Efficiencies over 8

A record power conversion efficiency of 8.40 % was obtained in single-component organic solar cells (SCOSCs) based on double-cable conjugated polymers. This is realized based on exciton separation playing the same role as charge transport in SCOSCs. Two double-cable conjugated polymers were designed with almost identical conjugated backbones and electron-withdrawing side units, but extra Cl atoms had different positions on the conjugated backbones. When Cl atoms were positioned at the main chains, the polymer formed the twist backbones, enabling better miscibility with the naphthalene diimide side units. This improves the interface contact between conjugated backbones and side units, resulting in efficient conversion of excitons into free charges. These findings reveal the importance of charge generation process in SCOSCs and suggest a strategy to improve this process: controlling miscibility between conjugated backbones and aromatic side units in double-cable conjugated polymers.

Synthesis and Characterization of Isoindigo-Based Push-Pull Chromophores

Symmetrical and unsymmetrical chromophores of isoindigo 3-7 were designed and synthesized, in which isoindigo was used as the central unit (electron acceptor unit A), triphenylamine as the end capping unit (electron donor group D), 1,1,4,4-tetracyanobutadiene (TCBD, A') and cyclohexa-2,5-diene-1,4-diylidene-expanded TCBD (A″) as the acceptor unit. The effects of multiacceptor units on photophysical, electrochemical, and computational studies were investigated. The photophysical properties of isoindigo 6 and 7 exhibit a strong intramolecular charge transfer (ICT) absorption band in the near IR region. The isoindigo 4-7 shows multi-redox waves with a low electrochemical band gap, which signifies the tuning of highest occupied molecular orbital-lowest unoccupied molecular orbital energy levels and enhance the π-conjugation. The computational studies demonstrate that there is a good agreement with experimental data. The molecular design and synthesis of isoindigo 4-7 gives a new avenue for the development of building blocks in organic electronics.

Thiophene- and Carbazole-Substituted N-Methyl-Fulleropyrrolidine Acceptors in PffBT4T-2OD Based Solar Cells

The impact of fullerene side chain functionalization with thiophene and carbazole groups on the device properties of bulk-heterojunction polymer:fullerene solar cells is discussed through a systematic investigation of material blends consisting of the conjugated polymer poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)-2,2';5',2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T-2OD) as donor and C60 or C70 fulleropyrrolidines as acceptors. The photovoltaic performance clearly depended on the molecular structure of the fulleropyrrolidine substituents although no direct correlation with the surface morphology of the photoactive layer, as determined by atomic force microscopy, could be established. Although some fulleropyrrolidines possess favorable lowest unoccupied molecular orbital levels, when compared to the standard PC71BM, they originated OPV cells with inferior efficiencies than PC71BM-based reference cells. Fulleropyrrolidines based on C60 produced, in general, better devices than those based on C70, and we attribute this observation to the detrimental effect of the structural and energetic disorder that is present in the regioisomer mixtures of C70-based fullerenes, but absent in the C60-based fullerenes. These results provide new additional knowledge on the effect of the fullerene functionalization on the efficiency of organic solar cells.

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review

The pursuit of low-cost, flexible, and lightweight renewable power resources has led to outstanding advancements in organic solar cells (OSCs). Among the successful design principles developed for synthesizing efficient conjugated electron donor (ED) or acceptor (EA) units for OSCs, chlorination has recently emerged as a reliable approach, despite being neglected over the years. In fact, several recent studies have indicated that chlorination is more potent for large-scale production than the highly studied fluorination in several aspects, such as easy and low-cost synthesis of materials, lowering energy levels, easy tuning of molecular orientation, and morphology, thus realizing impressive power conversion efficiencies in OSCs up to 17%. Herein, an up-to-date summary of the current progress in photovoltaic results realized by incorporating a chlorinated ED or EA into OSCs is presented to recognize the benefits and drawbacks of this interesting substituent in photoactive materials. Furthermore, other aspects of chlorinated materials for application in all-small-molecule, semitransparent, tandem, ternary, single-component, and indoor OSCs are also presented. Consequently, a concise outlook is provided for future design and development of chlorinated ED or EA units, which will facilitate utilization of this approach to achieve the goal of low-cost and large-area OSCs.

Covalently linked donor–acceptor dyad for efficient single material organic solar cells

A novel covalently linked donor–acceptor dyad comprising a dithienopyrrol-based oligomeric donor and a fullerene acceptor was synthesized and characterized.