Surface‐Electron Coupling for Efficient Hydrogen Evolution

High-Density Atomic Level Defect Engineering of 2D Fe-Based Metal-Organic Frameworks Boosts Oxygen and Hydrogen Evolution Reactions

Electrocatalysts based on metal-organic frameworks (MOFs) attracted significant attention for water splitting, while the transition between MOFs and metal oxyhydroxide poses a great challenge in identifying authentic active sites and long-term stability. Herein, we employ on-purpose defect engineering to create high-density atomic level defects on two-dimensional Fe-MOFs. The coordination number of Fe changes from 6 to 4.46, and over 28% of unsaturated Fe sites are formed in the optimized Fe-MOF. In situ characterizations of the most optimized Fe-MOF0.3 electrocatalyst during the oxygen evolution reaction (OER) process using Fourier transform infrared and Raman spectroscopy have revealed that some Fe unsaturated sites become oxidized with a concomitant dissociation of water molecules, causing generation of the crucial *OH intermediates and Fe oxyhydroxide. Moreover, the presence of Fe oxyhydroxide is compatible with the Volmer and Heyrovsky steps during the hydrogen evolution reaction (HER) process, which lower its energy barrier and accelerate the kinetics. As a result, the optimized Fe-MOF electrodes delivered remarkable OER (259 mV at 10 mA cm-2) and HER (36 mV at 10 mA cm-2) performance. Our study offers comprehensive understanding of the effect of phase transformation on the electrocatalytic process of MOF-based materials.

Sn Bulk Phase Doping and Surface Modification on Ti4 O7 for Oxygen Reduction to Hydrogen Peroxide

Developing stable and highly selective two-electron oxygen reduction reaction (2e- ORR) electrocatalysts for producing hydrogen peroxide (H2 O2 ) is considered a major challenge to replace the anthraquinone process and achieve a sustainable green economy. Here, we doped Sn into Ti4 O7 (D-Sn-Ti4 O7 ) by simple polymerization post-calcination method as a high-efficiency 2e- ORR electrocatalyst. In addition, we also applied plain calcination after the grinding method to load Sn on Ti4 O7 (L-Sn-Ti4 O7 ) as a comparison. However, the performance of L-Sn-Ti4 O7 is far inferior to that of the D-Sn-Ti4 O7 . D-Sn-Ti4 O7 exhibits a starting potential of 0.769 V (versus the reversible hydrogen electrode, RHE) and a high H2 O2 selectivity of 95.7 %. Excitingly, the catalyst can maintain a stable current density of 2.43 mA ⋅ cm-2 for 3600 s in our self-made H-type cell, and the cumulative H2 O2 production reaches 359.2 mg ⋅ L-1 within 50,000 s at 0.3 V. The performance of D-Sn-Ti4 O7 is better than that of the non-noble metal 2e- ORR catalysts reported so far. The doping of Sn not only improves the conductivity but also leads to the lattice distortion of Ti4 O7 , further forming more oxygen vacancies and Ti3+ , which greatly improves its 2e- ORR performance compared with the original Ti4 O7 . In contrast, since the Sn on the surface of L-Sn-Ti4 O7 displays a synergistic effect with Tin+ (3≤n≤4) of Ti4 O7 , the active center Tin+ dissociates the O=O bond, making it more inclined to 4e- ORR.

Engineering band structuring via dual atom modification for an efficient photoanode

Efficient carrier separation is important for improving photoelectrochemical water splitting. Here, the morphology modification and band structure engineering of Ta3N5 are accomplished by doping it with Cu and Zr using a two-step method for the first time. The initially interstitially-doped Cu atoms act as anchors to interact with subsequently doped Zr atoms under the influence of differences in electronegativity. This interaction results in Cu,Zrg-Ta3N5 having a dense morphology and higher crystallinity, which helps to reduce carrier recombination at grain boundaries. Furthermore, the gradient doping of Zr generates a band edge energy gradient, which significantly enhances bulk charge separation efficiency. Therefore, a photoanode based on Cu,Zrg-Ta3N5 delivers an onset potential of 0.38 VRHE and a photocurrent density of 8.9 mA cm-2 at 1.23 VRHE. Among all the Ta3N5-based photoanodes deposited on FTO, a Cu,Zrg-Ta3N5-based photoanode has the lowest onset potential and highest photocurrent. The novel material morphology regulation and band edge position engineering strategies described herein provide new ideas for the preparation of other semiconductor nanoparticles to improve the photoelectrochemical water splitting performance.

Aluminum-incorporation activates vanadium carbide with electron-rich carbon sites for efficient pH-universal hydrogen evolution reaction

Vanadium carbide (VC) is the greatest potential hydrogen evolution reaction (HER) catalyst because of its platinum-like property and abundant earth reserves. However, it exhibits insufficient catalytic performance due to the unfavorable interaction of reaction intermediates with catalysts. In this work, using NH4VO3 as the main raw material, the flow ratio of CH4 to Ar was accurately controlled, and a non-transition metal Al-doped into VC (100) nano-flowers with carbon hybrids on nickel foams (Al-VC@C/NF) was prepared for the first time as a high-efficiency HER catalyst by chemical vapor carbonization. The overpotential of Al-VC@C/NF catalysts in 0.5 M H2SO4 and 1 M KOH at a current density of 10 mA cm-2 are only 58 mV and 97 mV, respectively, which are the best HER performance among non-noble metal vanadium carbide based catalysts. Simultaneously, Al-VC@C/NF exhibits small Tafel slope (45 mV dec-1 and 73 mV dec-1) and excellent stability in acidic and alkaline media. Theoretical calculations demonstrate that doped Al atoms can induce electron redistribution on the vanadium carbide surface to form electron-rich carbon sites, which significantly reduces the energy barrier during the HER process. This work provides a new tactic to modulate vanadium-based carbons as efficient HER catalysts through non-transition metal doping.

Hydrogen Production Technology Promotes the Analysis and Prospect of the Hydrogen Fuel Cell Vehicles Development under the Background of Carbon Peak and Carbon Neutrality in China

Hydrogen fuel cell vehicles have always been regarded as the main direction for developing new energy vehicles in the future due to their advantages of zero emission, high cruising range, and strong environmental adaptability. Currently, although the related technologies have gradually matured, there are still many factors hindering its development. One of the main reasons is that the price of hydrogen fuel increases the cost of using vehicles, which puts it at a competitive disadvantage compared with traditional fuel vehicles and pure electric vehicles. Herein, we summarize the recent development status of hydrogen fuel cell vehicles at home and abroad, and analyze the cost and sustainability brought by the latest scientific research progress to the hydrogen production industry, which is derived from basic research on electrocatalysts used in industrial electrocatalytic water splitting with an alkaline electrolyte. Finally, the development of hydrogen fuel cell vehicles was analyzed and prospected, which is one of the main application fields of hydrogen in the future.

Cooperative Palladium/Isothiourea Catalyzed Enantioselective Formal (3+2) Cycloaddition of Vinylcyclopropanes and α,β-Unsaturated Esters

A protocol for the enantioselective synthesis of substituted vinylcyclopentanes has been realised using cooperative palladium and isothiourea catalysis. Treatment of vinylcyclopropanes with Pd(PPh3 )4 generates a zwitterionic π-allyl palladium intermediate that intercepts a catalytically generated α,β-unsaturated acyl ammonium species prepared from the corresponding α,β-unsaturated para-nitrophenyl ester and the isothiourea (R)-BTM. Intermolecular formal (3+2) cycloaddition between these reactive intermediates generates functionalised cyclopentanes in generally good yields and excellent diastereo- and enantiocontrol (up to >95 : 5 dr, 97 : 3 er), with the use of LiCl as an additive proving essential for optimal stereocontrol. To the best of our knowledge a dual transition metal/organocatalytic process involving α,β-unsaturated acyl ammonium intermediates has not been demonstrated previously.

NP monolayer supported transition-metal single atoms for electrochemical water splitting: a theoretical study

The development of cost-effective and highly efficient electrocatalysts for water splitting is highly desirable but remains an ongoing challenge. Numerous single-atom catalysts (SACs) have achieved satisfactory performances in this area; however, non-carbon metal-free substrates have been rarely explored. Herein, we report a series of single-metal atoms supported on a novel two-dimensional NP monolayer as promising electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) by theoretical calculations. Our results disclose that Ti@NP, V@NP and Ir@NP exhibit desirable catalytic activity for the HER with extremely low of -0.004, -0.051, and 0.017 eV, respectively. More importantly, the calculated activation barriers for the Tafel reactions of these SACs are much lower than those for the benchmark Pt catalysts. In addition, Pt@NP shows the lowest η^OER of 0.495 V, followed by Rh@NP (η^OER = 0.548 V), which are even superior to that of state-of-the-art IrO₂. This work highlights the potential application of metal-free supports in SACs, which also further enriches the application of a NP monolayer in other related electrochemical processes.

Nitrogen-Doped Cobalt Diselenide with Cubic Phase Maintained for Enhanced Alkaline Hydrogen Evolution

The introduction of heteroatoms is one of the most important ways to modulate the intrinsic electronic structure of electrocatalysts to improve their catalytic activity. However, for transition metal chalcogenides with highly symmetric crystal structure (HS-TMC), the introduction of heteroatoms, especially those with large atomic radius, often induces large lattice distortion and vacancy defects, which may lead to structural phase transition of doped materials or structural phase reconstruction during the catalytic reaction. Such unpredictable situations will make it difficult to explore the connection between the intrinsic electronic structure of doped catalysts and catalytic activity. Herein, taking thermodynamically stable cubic CoSe₂ phase as an example, we demonstrate that nitrogen incorporation can effectively regulate the intrinsic electronic structure of HS-TMC with structural phase stability and thus promote its electrocatalytic activity for the hydrogen evolution activity (HER). In contrast, the introduction of phosphorus can lead to structural phase transition from cubic CoSe₂ to orthorhombic phase, and the structural phase of phosphorus-doped CoSe₂ is unstable for HER.

"Superaerophobic" NiCo bimetallic phosphides for highly efficient hydrogen evolution reaction electrocatalysts

A "superaerophobic" NiCo bimetallic phosphide electrocatalyst has been fabricated by employing bimetal-organic frameworks as self-sacrificing templates. An overpotential of only 205 mV can drive the HER current density to 800 mA cm-2, which is even superior to that for Pt/C. This study provides a promising approach for the development of industrialized HER electrocatalysts.

Transition-Metal Carbides as Hydrogen Evolution Reduction Electrocatalysts: Synthetic Methods and Optimization Strategies

With the strengths of zero carbon emission and high gravimetric energy density, hydrogen energy is recognized as a primary choice for future energy supply. Electrochemical water splitting provides a promising strategy for effective and sustainable hydrogen production through renewable electricity, and one of the immediate challenges toward its large-scale application is the availability of low-cost and efficient electrocatalysts for the hydrogen evolution reaction (HER). Given the enormous efforts in the exploration of potential transition-metal carbide (TMC) electrocatalysts, this review aims to summarize the recent advances in synthetic methods and optimization strategies of TMC electrocatalysts. Additionally, the perspectives for the development of novel efficient TMC-based catalysts are also proposed.

Phosphorus-Doped Iron Nitride Nanoparticles Encapsulated by Nitrogen-Doped Carbon Nanosheets on Iron Foam In Situ Derived from Saccharomycetes Cerevisiae for Electrocatalytic Overall Water Splitting

It is vitally essential to propose a novel, economical, and safe preparation method to design highly efficient electrocatalysts. Herein, phosphorus-doped iron nitride nanoparticles encapsulated by nitrogen-doped carbon nanosheets are grown directly on the iron foam substrate (P-Fe₃ N@NC NSs/IF) by in situ deriving from Saccharomycetes cerevisiae (S. cerevisiae), where anion elements of C, N, and P all from S. cerevisiae replace the hazardous CH₄ , NH₃ , and H₃ P. The diffusion pattern of N, P in S. cerevisiae and contact form between metal and S. cerevisiae observably affect the composition and phase of the product during high-temperature calcination. The obtained P-Fe₃ N@NC NSs/IF demonstrates superior electrocatalytic performance for the hydrogen evolution reaction and oxygen evolution reaction, also satisfying durability. Theoretical calculation confirms that Fe sites of P-Fe₃ N serve as the active center, and N sites and P doping regulate the hydrogen binding strength to enhance catalytic ability. Additionally, the two-electrode electrolyzer assembled by P-Fe₃ N@NC NSs/IF as both anode and cathode electrodes needs only 1.61 V to reach 10 mA cm^-2 for overall water splitting with a superb stability. The S. cerevisiae-based process presents a feasible approach for synthesis of nitrides, carbides, phosphides, and electrocatalytic applications.

Advanced water splitting electrocatalysts via the design of multicomponent heterostructures

The design of multicomponent heterostructures for electrocatalysts is a promising strategy for enhancing electrocatalytic activities.