Layer‐Defining Strategy to Grow Two‐Dimensional Molecular Crystals on a Liquid Surface down to the Monolayer Limit

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors

Electrohydrodynamic (EHD) jet printing is a widely employed technology to create high-resolution patterns and thus has enormous potential for circuit production. However, achieving both high conductivity and high resolution in printed polymer electrodes is a challenging task. Here, by modulating the aggregation state of the conducting polymer in the solution and solid phases, a stable and continuous jetting of PEDOT:PSS is realized, and high-conductivity electrode arrays are prepared. The line width reaches less than 5 μm with a record-high conductivity of 1250 S/cm. Organic field-effect transistors (OFETs) are further developed by combining printed source/drain electrodes with ultrathin organic semiconductor crystals. These OFETs show great light sensitivity, with a specific detectivity (D*) value of 2.86 × 1014 Jones. In addition, a proof-of-concept fully transparent phototransistor is demonstrated, which opens up new pathways to multidimensional optical imaging.

Molecularly Thin 2D Organic Single Crystals: A New Platform for High-Performance Polarization-Sensitive Phototransistors

The inherent linear dichroism (LD), high absorption, and solution processability of organic semiconductors hold immense potential to revolutionize polarized light detection. However, the disordered molecular packing inherent to polycrystalline thin films obscures their intrinsic diattenuation, resulting in diminished polarization sensitivity. In this study, we develop filter-free organic polarization-sensitive phototransistors (PSPs) with both a high linear dichroic ratio (LDR) and exceptional photosensitivity utilizing molecularly thin dithieno[3,2-b:2',3'-d]thiophene derivatives (DTT-8) two-dimensional molecular crystals (2DMCs) as the active layer. The orderly molecular packing in 2DMCs amplifies the inherent LD, and their molecular-scale thickness enables complete channel depletion, significantly reducing the dark current. As a result, PSPs with an impressive LDR of 3.15 and a photosensitivity reaching 3.02 × 106 are obtained. These findings present a practical demonstration of using the polarization angle as an encryption key in optical communication, showcasing the potential of 2DMCs as a viable and promising category of semiconductors for filter-free, polarization-sensitive photodetectors.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Overcoming the Unfavorable Effects of "Boltzmann Tyranny:" Ultra-Low Subthreshold Swing in Organic Phototransistors via One-Transistor-One-Memristor Architecture

Organic phototransistors (OPTs), as photosensitive organic field-effect transistors (OFETs), have gained significant attention due to their pivotal roles in imaging, optical communication, and night vision. However, their performance is fundamentally limited by the Boltzmann distribution of charge carriers, which constrains the average subthreshold swing (SSave ) to a minimum of 60 mV/decade at room temperature. In this study, an innovative one-transistor-one-memristor (1T1R) architecture is proposed to overcome the Boltzmann limit in conventional OFETs. By replacing the source electrode in an OFET with a memristor, the 1T1R device exploits the memristor's sharp resistance state transitions to achieve an ultra-low SSave of 18 mV/decade. Consequently, the 1T1R devices demonstrate remarkable sensitivity to photo illumination, with a high specific detectivity of 3.9 × 109  cm W-1 Hz1/2 , outperforming conventional OPTs (4.9 × 104  cm W-1 Hz1/2 ) by more than four orders of magnitude. The 1T1R architecture presents a potentially universal solution for overcoming the detrimental effects of "Boltzmann tyranny," setting the stage for the development of ultra-low SSave devices in various optoelectronic applications.

Enhancing the Uniformity of Organic Field-Effect Transistors by a Single-Crystalline Layer-Controlled Active Channel

Despite remarkable improvement in the mobility of the organic field-effect transistors (OFETs) being achieved in past decades, the uniformity in electrical performance remains ambiguous, impeding their implantation in organic integrated circuits. The coefficient of variance (CV) in mobility of reported OFETs is typically larger than 8%, which is not adequate for building medium-to-large scale integrated circuits. In this work, it is shown that utilizing single-domain molecular monolayer crystals as the active channel can largely enhance the uniformity of OFETs. Benefiting from the sole molecular layer with long-range ordering, the OFETs exhibit uniformities in both channel transport and charge injection, thereby giving rise to a high average mobility of 11.64 cm2 V-1 s-1 and CV of only 2.57%. Statistical transmission length method evaluation is conducted, covering channel length from 3 to 21 µm, channel width from 90 to 170 µm, and a total OFET number of 370. The low contact resistance of 79.00 ± 7.00 Ω cm and high intrinsic mobility of 12.36 ± 0.45 cm2 V-1 s-1 are acquired with very high accuracy and reliability. As such, this work provides a practical way to enhance the uniformity of OFETs by a single-crystalline layer-controlled active channel toward their applications in integrated circuits.

Wafer-Scale Epitaxial Growth of Two-dimensional Organic Semiconductor Single Crystals toward High-Performance Transistors

The success of state-of-the-art electronics and optoelectronics relies heavily on the capability to fabricate semiconductor single-crystal wafers. However, the conventional epitaxial growth strategy for inorganic wafers is invalid for growing organic semiconductor single crystals due to the lack of lattice-matched epitaxial substrates and intricate nucleation behaviors, severely impeding the advancement of organic single-crystal electronics. Here, an anchored crystal-seed epitaxial growth method for wafer-scale growth of 2D organic semiconductor single crystals is developed for the first time. The crystal seed is firmly anchored on the viscous liquid surface, ensuring the steady epitaxial growth of organic single crystals from the crystal seed. The atomically flat liquid surface effectively eliminates the disturbance from substrate defects and greatly enhances the 2D growth of organic crystals. Using this approach, a wafer-scale few-layer bis(triethylsilythynyl)-anthradithphene (Dif-TES-ADT) single crystal is formed, yielding a breakthrough for organic field-effect transistors with a high reliable mobility up to 8.6 cm2 V-1 s-1 and an ultralow mobility variable coefficient of 8.9%. This work opens a new avenue to fabricate organic single-crystal wafers for high-performance organic electronics.

High-Contrast Bidirectional Optoelectronic Synapses based on 2D Molecular Crystal Heterojunctions for Motion Detection

Light-stimulated optoelectronic synaptic devices are fundamental compositions of the neuromorphic vision system. However, there are still huge challenges to achieving both bidirectional synaptic behaviors under light stimuli and high performance. Herein, a bilayer 2D molecular crystal (2DMC) p-n heterojunction is developed to achieve high-performance bidirectional synaptic behaviors. The 2DMC heterojunction-based field effect transistor (FET) devices exhibit typical ambipolar properties and remarkable responsivity (R) of 3.58×10⁴ A W^-1 under weak light as low as 0.008 mW cm^-2 . Excitatory and inhibitory synaptic behaviors are successfully realized by the same light stimuli under different gate voltages. Moreover, a superior contrast ratio (CR) of 1.53×10³ is demonstrated by the ultrathin and high-quality 2DMC heterojunction, which transcends previous optoelectronic synapses and enables application for the motion detection of the pendulum. Furthermore, a motion detection network based on the device is developed to detect and recognize classic motion vehicles in road traffic with an accuracy exceeding 90%. This work provides an effective strategy for developing high-contrast bidirectional optoelectronic synapses and shows great potential in the intelligent bionic device and future artificial vision.

Hierarchical Nanoarchitectonics of Ultrathin 2D Organic Nanosheets for Aqueous Processed Electroluminescent Devices

Ultrathin 2D organic nanosheets (2DONs) with high mobility have received tremendous attention due to thickness of few molecular layers. However, ultrathin 2DONs with high luminescence efficiency and flexibility simultaneously are rarely reported. Here, the ultrathin 2DONs (thickness: 19 nm) through the modulation of tighter molecular packing (distance: ≈3.31 Å) achievable from the incorporation of methoxyl and dipenylamine (DPA) groups into 3D spirofluorenexanthene (SFX) building blocks is successfully prepared. Even with closer molecular stacking, ultrathin 2DONs still enable the suppression of aggregation quenching to exhibit higher quantum yields of blue emission (Φ_F  = 48%) than that on amorphous film (Φ_F  = 20%), and show amplified spontaneous emission (ASE) with a mediate threshold (332 mW cm^-2 ). Further, through drop-casting method, the ultrathin 2DONs are self-organized into large-scale flexible 2DONs films (1.5 × 1.5 cm) with the low hardness (H: 0.008 Gpa) and low Young's modulus (E_r : 0.63 Gpa). Impressively, the large-scale 2DONs film can realize electroluminescence performances with a maximum luminance (445 cd m^-2 ) and low turn on voltage (3.7 V). These ultrathin 2DONs provide a new avenue for the realization of flexible electrically pumping lasers and intelligent quantum tunneling systems.

Spatially Confined Face-Selective Growth of Large-Area 2D Organic Molecular Crystals in a Supramolecular Gel for Highly Efficient Flexible Photodetection

2D organic molecular crystals (2DOMCs) are promising materials for the fabrication of high-performance optoelectronic devices. However, the growth of organic molecules into 2DOMCs remains a challenge because of the difficulties in controlling their self-assembly with a preferential orientation in solution-process crystallization. Herein, fullerene is chosen as a model molecule to develop a supramolecular gel crystallization approach to grow large-area 2DOMCs by controlling the perfect arrangement on the {220} crystal plane with the assistance of a gelated solvent. In this case, the gel networks provide tuneable confined spaces to control the crystallization kinetics toward the growth of dominant crystal faces by their inhibiting motions of solvent or solute molecules to enable the growth of perfect crystals at appropriate nucleation rates. As a result, a large-area fullerene 2DOMC is produced successfully and its corresponding device on a flexible substrate exhibits excellent bendable properties and ultra-high weak light detection ability (2.9 × 1011 Jones) at a 10 V bias upon irradiation with 450 nm incident light. Moreover, its photoelectric properties remain unchanged after 200 cycles of bending at angles of 45, 90, and 180°. These results can be extended to the growth of other 2DOMCs for potentially fabricating advanced organic (opto)electronics.

Organic Semiconductor Crystal Engineering for High-Resolution Layer-Controlled 2D Crystal Arrays

2D organic semiconductor crystals (2DOSCs) have extraordinary charge transport capability, adjustable photoelectric properties, and superior flexibility, and have stimulated continuous research interest for next-generation electronic and optoelectronic applications. The prerequisite for achieving large-area and high-throughput optoelectronic device integration is to fabricate high-resolution 2DOSC arrays. Patterned substrate- and template-assisted self-assembly is an effective strategy to fabricate OSC arrays. However, the film thickness is difficult to control due to the complicated crystallization process during solvent evaporation. Therefore, the manufacturing of 2DOSC arrays with high-resolution and controllable molecular-layer numbers through solution-based patterning methods remains a challenge. Herein, a two-step strategy to produce high-resolution layer-controlled 2DOSC arrays is reported. First, large-scale 2DOSCs with well-defined layer numbers are obtained by a solution-processed organic semiconductor crystal engineering method. Next, the high-resolution layer-controlled 2DOSC arrays are fabricated by a polydimethylsiloxane mold-assisted selective contact evaporation printing technique. The organic field-effect transistors (OFETs) based on 2DOSC arrays have high electrical performance and excellent uniformity. The 2,6-bis(4-hexylphenyl)anthracene 2DOSC arrays-based OFETs have a small variation of 12.5% in mobility. This strategy can be applied to various organic semiconductors and pattern arrays. These demonstrations will offer more opportunities for 2DOSCs for integrated optoelectronic devices.

Negative Phototransistors with Ultrahigh Sensitivity and Weak-Light Detection Based on 1D/2D Molecular Crystal p-n Heterojunctions and their Application in Light Encoders

Anomalous negative phototransistors in which the channel current decreases under light illumination hold potential to generate novel and multifunctional optoelectronic applications. Although a variety of design strategies have been developed to construct such devices, NPTs still suffer from far lower device performance compared to well-developed positive phototransistors (PPTs). In this work, a novel 1D/2D molecular crystal p-n heterojunction, in which p-type 1D molecular crystal (1DMC) arrays are embedded into n-type 2D molecular crystals (2DMCs), is developed to produce ultrasensitive NPTs. The p-type 1DMC arrays act as light-absorbing layers to induce p-doping of n-type 2DMCs through charge transfer under illumination, resulting in ineffective gate control and significant negative photoresponses. As a result, the NPTs show remarkable performances in photoresponsivity (P) (1.9 × 10⁸ ) and detectivity (D*) (1.7 × 10¹⁷ Jones), greatly outperforming previously reported NPTs, which are one of the highest values among all organic phototransistors. Moreover, the device exhibits intriguing characteristics undiscovered in PPTs, including precise control of the threshold voltage by controlling light signals and ultrasensitive detection of weak light. As a proof-of-concept, the NTPs are demonstrated as light encoders that can encrypt electrical signals by light. These findings represent a milestone for negative phototransistors, and pave the way for the development of future novel optoelectronic applications.

Organic ultrathin nanostructure arrays: materials, methods and applications

Organic ultrathin semiconductor nanostructures have attracted continuous attention in recent years owing to their excellent charge transport capability, favorable flexibility, solution-processability and adjustable photoelectric properties, providing opportunities for next-generation optoelectronic applications. For integrated electronics, organic ultrathin nanostructures need to be prepared as large-area patterns with precise alignment and high crystallinity to achieve organic electronic devices with high performance and high throughput. However, the fabrication of organic ultrathin nanostructure arrays still remains challenging due to uncontrollable growth along the height direction in solution processes. In this review, we first introduce the properties, assembly methods and applications of four typical organic ultrathin nanostructures, including small molecules, polymers, and other organic-inorganic hybrid materials. Five categories of representative solution-processing techniques for patterning organic micro- and nanostructures are summarized and discussed. Finally, challenges and perspectives in the controllable preparation of organic ultrathin arrays and potential applications are featured on the basis of their current development.

Wall-Confined Spreading Dynamics on the Surface of Surfactant Solution

A liquid spreading over another is a universal physical process in the nature, which was investigated by the scaling law to reveal the underlying mechanical mechanism over the decades. However, scaling laws are restricted to piecewise physical stages, respectively. It is a challenge to present a full physical picture for a dynamic spreading process covering a wide-spectrum speed. We propose a general wall-confined spreading dynamics (WCSD) model originating from molecular kinetic theory (MKT). It creatively illustrates the order and domination between driving energy and energy dissipation (or transfer) using a phase diagram according to theory and experiments. This work reveals the deep mechanical mechanism of WCSD which provides an indirect guidance on the solution processing methods of two-dimensional molecular crystals (2DMCs) growth.

Highly Efficient Contact Doping for High-Performance Organic UV-Sensitive Phototransistors

Organic ultraviolet (UV) phototransistors are promising for diverse applications. However, wide-bandgap organic semiconductors (OSCs) with intense UV absorption tend to exhibit large contact resistance (Rc) because of an energy-level mismatch with metal electrodes. Herein, we discovered that the molecular dopant of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) was more efficient than the transition metal oxide dopant of MoO3 in doping a wide-bandgap OSC, although the former showed smaller electron affinity (EA). By efficient contact doping, a low Rc of 889 Ω·cm and a high mobility of 13.89 cm2V−1s−1 were achieved. As a result, UV-sensitive phototransistors showed high photosensitivity and responsivity.

Ultrasmooth Organic Films Via Efficient Aggregation Suppression by a Low-Vacuum Physical Vapor Deposition

Organic thin films with smooth surfaces are mandated for high-performance organic electronic devices. Abrupt nucleation and aggregation during film formation are two main factors that forbid smooth surfaces. Here, we report a simple fast cooling (FC) adapted physical vapor deposition (FCPVD) method to produce ultrasmooth organic thin films through effectively suppressing the aggregation of adsorbed molecules. We have found that thermal energy control is essential for the spread of molecules on a substrate by diffusion and it prohibits the unwanted nucleation of adsorbed molecules. FCPVD is employed for cooling the horizontal tube-type organic vapor deposition setup to effectively remove thermal energy applied to adsorbed molecules on a substrate. The organic thin films prepared using the FCPVD method have remarkably ultrasmooth surfaces with less than 0.4 nm root mean square (RMS) roughness on various substrates, even in a low vacuum, which is highly comparable to the ones prepared using conventional high-vacuum deposition methods. Our results provide a deeper understanding of the role of thermal energy employed to substrates during organic film growth using the PVD process and pave the way for cost-effective and high-performance organic devices.

Polymer-Assisted Space-Confined Strategy for the Foot-Scale Synthesis of Flexible Metal-Organic Framework-Based Composite Films

At the gas-liquid interface, the confined synthesis of metal-organic framework (MOF) films has been extensively developed by spreading an ultrathin oil layer on the aqueous surface as a reactor. However, this interface is susceptible to various disturbances and incapable of synthesizing large-area crystalline MOF films. Herein, we developed a polymer-assisted space-confined strategy to synthesize large-area films by blending poly(methyl methacrylate) (PMMA) into the oil layer, which improved the stability of the gas-liquid interface and the self-shrinkage of the oil layer on the water surface. Meanwhile, the as-synthesized MOFs as a quasi-solid substrate immobilized the edge of the oil layer, which maintained a large spreading area. Thanks to this synergistic effect, we synthesized the freestanding MOF-based film with a foot-level (0.66 ft) lateral dimension, which is the largest size reported so far. Besides, due to the phase separation of the two components, the MOF-PMMA composite film combined the conductivity of MOFs (1.13 S/m) with the flexibility of PMMA and exhibited excellent mechanical properties. More importantly, this strategy could be extended to the preparation of other MOFs, coordination polymers (CPs), and even inorganic material composite films, bringing light to the design and large-scale synthesis of various composite films for practical applications.

Wafer-Scale and Full-Coverage Two-Dimensional Molecular Monolayers Strained by Solvent Surface Tension Balance

Inspired by the outstanding properties discovered in two-dimensional materials, the bottom-up generation of molecular monolayers is becoming again extremely popular as a route to develop novel functional materials and devices with tailored characteristics and minimal materials consumption. However, achieving a full-coverage over a large-area still represents a grand challenge. Here we report a molecular self-assembly protocol at the water surface in which the monolayers are strained by a novel solvent surface tension balance (SSTB) instead of a physical film balance as in the conventional Langmuir-Blodgett (LB) method. The obtained molecular monolayers can be transferred onto any arbitrary substrate including rigid inorganic oxides and metals, as well as flexible polymeric dielectrics. As a proof-of-concept, their application as ideal modification layers of a dielectric support for high-performance organic field-effect transistors (OFETs) has been demonstrated. The field-effect mobilities of both p- and n-type semiconductors displayed dramatic improvements of 1-3 orders of magnitude on SSTB-derived molecular monolayer, reaching values as high as 6.16 cm² V^-1 s^-1 and 0.68 cm² V^-1 s^-1 for pentacene and PTCDI-C8, respectively. This methodology for the fabrication of wafer-scale and defect-free molecular monolayers holds potential toward the emergence of a new generation of high-performance electronics based on two-dimensional materials.

Ultra-thin two-dimensional molecular crystals grown on a liquid surface for high-performance phototransistors

A novel strategy for the growth of molecularly thin two-dimensional molecular crystals (2DMCs) of organic semiconductors with poor solubility was developed. Large-area bilayer 2DMCs were grown on a liquid surface at elevated temperatures, with record mobility and superior photoresponse.

Water-Surface Drag Coating: A New Route Toward High-Quality Conjugated Small-Molecule Thin Films with Enhanced Charge Transport Properties

Electronic properties of organic semiconductor (OSC) thin films are largely determined by their morphologies and crystallinities. However, solution-processed conjugated small-molecule OSC thin films usually exhibit abundant grain boundaries and impure grain orientations because of complex fluid dynamics during solution coating. Here, a novel methodology, water-surface drag coating, is demonstrated to fabricate high-quality OSC thin films with greatly enhanced charge transport properties. This method utilizes the water surface to alter the evaporation dynamics of solution to enlarge the grain size, and a unique drag-coating process to achieve the unidirectional growth of organic crystals. Using 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (Dif-TES-ADT) as an example, thin films with millimeter-sized single-crystal domains and pure crystallographic orientations are achieved, revealing a significant enhancement (4.7 times) of carrier mobility. More importantly, the resulting film can be directly transferred onto any desired flexible substrates, and flexible transistors based on the Dif-TES-ADT thin films show a mobility as high as 16.1 cm² V^-1 s^-1 , which represents the highest mobility value for the flexible transistors reported thus far. The method is general for the growth of various high-quality OSC thin films, thus opening up opportunities for high-performance organic flexible electronics.

Graphene-Quantum-Dots-Induced Centimeter-Sized Growth of Monolayer Organic Crystals for High-Performance Transistors

Monolayer organic crystals have attracted considerable attention due to their extraordinary optoelectronic properties. Solution self-assembly on the surface of water is an effective approach to fabricate monolayer organic crystals. However, due to the difficulties in controlling the spreading of organic solution on the water surface and the weak intermolecular interaction between the organic molecules, large-area growth of monolayer organic crystals remains a great challenge. Here, a graphene quantum dots (GQDs)-induced self-assembly method for centimeter-sized growth of monolayer organic crystals on a GQDs solution surface is reported. The spreading area of the organic solution can be readily controlled by tuning the pH value of the GQDs solution. Meanwhile, the π-π stacking interaction between the GQDs and the organic molecules can effectively reduce the nucleation energy of the organic molecules and afford a cohesive force to bond the crystals, enabling large-area growth of monolayer organic crystals. Using 2,7-didecyl benzothienobenzothiopene (C₁₀-BTBT) as an examples, centimeter-sized monolayer C₁₀-BTBT crystal with uniform molecular packing and crystal orientation is attained. Organic field-effect transistors based on the monolayer C₁₀-BTBT crystals exhibit a high mobility up to 2.6 cm² V^-1 s^-1, representing the highest mobility value for solution-assembled monolayer organic crystals. This work provides a feasible route for large-scale fabrication of monolayer organic crystals toward high-performance organic devices.

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

Organic electronics with π-conjugated organic semiconductors are promising candidates for the next electronics revolution. For the conductive channel, the large-area two-dimensional (2D) crystals of organic semiconductors (2DCOS) serve as useful scaffolds for modern organic electronics, benefiting not only from long-range order and low defect density nature but also from unique charge transport characteristic and photoelectrical properties. Meanwhile, the solution process with advantages of cost-effectiveness and room temperature compatibility is the foundation of high-throughput print electrical devices. Herein, we will give an insightful overview to witness the huge advances in 2DCOS over the past decade. First, the typical influencing factors and state-of-the-art assembly strategies of the solution-process for large-area 2DCOS over sub-millimeter even to wafer size are discussed accompanying rational evaluation. Then, the charge transport characteristics and contact resistance of 2DCOS-based transistors are explored. Following this, beyond single transistors, the p-n junction devices and planar integrated circuits based on 2DCOS are also emphasized. Furthermore, the burgeoning phototransistors (OPTs) based on crystals in the 2D limits are elaborated. Next, we emphasized the unique and enhanced photoelectrical properties based on a hybrid system with other 2D van der Waals solids. Finally, frontier insights and opportunities are proposed, promoting further research in this field.

Ultrafast Electron Transfer Before Singlet Fission and Slow Triplet State Electron Transfer in Pentacene Single Crystal/C60 Heterostructure

The singlet fission (SF) process converts one high-energy singlet exciton to two low-energy triplet excitons after absorbing one photon. Organic photovoltaic devices based on the SF process have shown great potential in solar energy conversion to exceed Shockley-Queisser limit. The key to SF photovoltaic devices requires efficient electron transfer (ET) from triplet exciton after SF, which is yet to be thoroughly investigated. Here, we performed thorough photophysical studies in 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene)/C₆₀ heterostructures using TIPS-pentacene microsize single crystal as a well-defined model system. We show the SF process in TIPS-pentacene single crystal occurs by a two-step process, with triplet pair intermediates forming in 75 fs and then dissociating to non-interacting triplets in 1.6 ps. The SF process in single crystal is comparable to that in polycrystalline film. Importantly, we observe a considerable fraction of singlet excitons is quenched by ultrafast (<75 fs) interfacial ET prior to fission and no ET from triplet excitons in 1.5 ns time window. We confirm that the absence of ET is not limited by exciton diffusion but due to very slow (≫1.5 ns) interfacial ET from triplet exciton. The observations contradict expected singlet and triplet ET behaviors based on a simple two-state Marcus ET model and suggest long-range interfacial ET from delocalized photoexcitation. The ultrafast ET from singlet exciton before SF and slow ET from triplet exciton call for reconsideration and careful design of efficient SF photovoltaic devices.