Nano-architectonics of Pt single-atoms and differently-sized nanoparticles supported by manganese-oxide nanosheets and impact on catalytic and anti-biofilm activities

Hybrid-nanozymes are promising in various applications, but comprehensive comparison of hybrid-nanozymes composed of single-atoms or nanoparticles on the same support has never been made. Here, manganese-oxide nanosheets were loaded with Pt-single-atoms or differently-sized nanoparticles and their oxidase- and-peroxidase activities compared. High-resolution Transmission-Electron-Microscopy and corresponding Fast Fourier Transform imaging showed that Pt-nanoparticles (1.5 nm diameter) had no clear (111) crystal-planes, while larger nanoparticles had clear (111) crystal-planes. X-ray Photo-electron Spectroscopy demonstrated that unloaded nanosheets were composed of MnO2 with a high number of oxygen vacancies (Vo/Mn 0.4). Loading with 7.0 nm Pt-nanoparticles induced a change to Mn2O3, while loading with 1.5 nm nanoparticles increased the number of vacancies (Vo/Mn 1.2). Nanosheets loaded with 3.0 nm Pt-nanoparticles possessed similarly high catalytic activities as Pt-single-atoms. However, loading with 1.5 nm or 7.0 nm Pt-nanoparticles yielded lower catalytic activities. A model is proposed explaining the low catalytic activity of under- and over-sized Pt-nanoparticles as compared with intermediately-sized (3.0 nm) Pt-nanoparticles and single-atoms. Herewith, catalytic activities of hybrid-nanozymes composed of single-atoms and intermediately-sized nanoparticles are put a par, as confirmed here with respect to bacterial biofilm eradication. This conclusion facilitates a balanced choice between using Pt-single-atoms or nanoparticles in further development and application of hybrid-nanozymes.

Construction of Metal/Zeolite Hybrid Nanoframe Reactors via in-Situ-Kinetics Transformations

Metal/zeolite hybrid nanoframes featuring highly accessible compartmental environments, abundant heterogeneous interfaces, and diverse chemical compositions are expected to possess significant potential for heterogeneous catalysis, yet their general synthetic methodology has not yet been established. In this study, we developed a two-step in-situ-kinetics transformation approach to prepare metal/ZSM-5 hybrid nanoframes with exceptionally open nanostructures, tunable metal compositions, and abundant accessible active sites. Initially, the process involved the formation of single-crystalline ZSM-5 nanoframes through an anisotropic etching and recrystallization kinetic transformation process. Subsequently, through an in situ reaction of the Ni2+ ions and the silica species etched from ZSM-5 nanoframes, layered nickel silicate emerged on both the inner and outer surfaces of the zeolite nanoframes. Upon reduction under a hydrogen atmosphere, well-dispersed Ni nanoparticles were produced and immobilized onto the ZSM-5 nanoframes. Strikingly, this strategy can be extended to immobilize a variety of ultrasmall monometallic and bimetallic alloy nanoparticles on zeolite nanoframes. Benefiting from the structural and compositional advantages, the resultant hybrid nanoframes with a high loading of discrete Ni nanoparticles exhibited enhanced performance in the hydrodeoxygenation of stearic acid into liquid fuels. Overall, the methodology shares fresh insights into the rational construction of intricate frame-like metal/zeolite hybrid nanoreactors for many potential catalytic applications.

Encapsulation of Pd Single-Atom Sites in Zeolite for Highly Efficient Semihydrogenation of Alkynes

Palladium (Pd)-based single-atom catalysts (SACs) have shown outstanding selectivity for semihydrogenation of alkynes, but most Pd single sites coordinated with highly electronegative atoms (such as N, O, and S) of supports will result in a decrease in the electron density of Pd sites, thereby weakening the adsorption of reactants and reducing catalytic performance. Constructing a rich outer-shell electron environment of Pd single-atom sites by changing the coordination structure offers a novel opportunity to enhance the catalytic efficiency with excellent alkene selectivity. Therefore, in this work, we first propose the in situ preparation of isolated Pd sites encapsulated within Al/Si-rich ZSM-5 structure using the one-pot seed-assisted growth method. Pd1@ZSM-5 features Pd-O-Al/Si bonds, which can boost the domination of d-electron near the Fermi level, thereby promoting the adsorption of substrates on Pd sites and reducing the energy barrier for the semihydrogenation of alkynes. In semihydrogenation of phenylacetylene, Pd1@ZSM-5 catalyst performs the highest turnover frequency (TOF) value of 33582 molC═C/molPd/h with 96% selectivity of styrene among the reported heterogeneous catalysts and nearly 17-fold higher than that of the commercial Lindlar catalyst (1992 molC═C/molPd/h). This remarkable catalytic performance can be retained even after 6 cycles of usage. Particularly, the zeolitic confinement structure of Pd1@ZSM-5 enables precise shape-selective catalysis for alkyne reactants with a size less than 4.3 Å.

Efficient Hydrogen Generation from Ammonia Borane Hydrolysis on a Tandem Ruthenium-Platinum-Titanium Catalyst

Hydrolysis of ammonia borane (NH3BH3, AB) involves multiple undefined steps and complex adsorption and activation, so single or dual sites are not enough to rapidly achieve the multi-step catalytic processes. Designing multi-site catalysts is necessary to enhance the catalytic performance of AB hydrolysis reactions but revealing the matching reaction mechanisms of AB hydrolysis is a great challenge. In this work, we propose to construct RuPt-Ti multi-site catalysts to clarify the multi-site tandem activation mechanism of AB hydrolysis. Experimental and theoretical studies reveal that the multi-site tandem mode can respectively promote the activation of NH3BH3 and H2O molecules on the Ru and Pt sites as well as facilitate the fast transfer of *H and the desorption of H2 on Ti sites at the same time. RuPt-Ti multi-site catalysts exhibit the highest turnover frequency (TOF) of 1293 min-1 for AB hydrolysis reaction, outperforming the single-site Ru, dual-site RuPt and Ru-Ti catalysts. This study proposes a multi-site tandem concept for accelerating the dehydrogenation of hydrogen storage material, aiming to contribute to the development of cleaner, low-carbon, and high-performance hydrogen production systems.

Regulating Second-Shell Coordination in Cobalt Single-Atom Catalysts toward Highly Selective Hydrogenation

Manipulating the local coordination environment of central metal atoms in single-atom catalysts (SACs) is a powerful strategy to exploit efficient SACs with optimal electronic structures for various applications. Herein, Co-SACs featured by Co single atoms with coordinating S atoms in the second shell dispersed in a nitrogen-doped carbon matrix have been developed toward the selective hydrogenation of halo-nitrobenzene. The location of the S atom in the model Co-SAC is verified through synchrotron-based X-ray absorption spectroscopy and theoretical calculations. The resultant Co-SACs containing second-coordination shell S atoms demonstrate excellent activity and outstanding durability for selective hydrogenation, superior to most precious metal-based catalysts. In situ characterizations and theoretical results verify that high activity and selectivity are attributed to the advantageous formation of the Co-O bond between p-chloronitrobenzene and Co atom at Co1N4-S moieties and the lower free energy and energy barriers of the reaction. Our findings unveil the correlation between the performance and second-shell coordination atom of SACs.

Mechanistic insights on the preparation of 5-methyl-2-hexanone by hydrogenation of 5-methyl-3-hexen-2-one using Pd/Al2O3 catalysts

5-methyl-2-hexanone is used as a versatile polymerization solvent for industrial preparation processes of bulk and fine chemicals. An efficient catalyst, Pd/γ-Al2O3, is reported for the preparation of 5-methyl-2-hexanone by selective hydrogenation of 5-methyl-3-hexen-2-one. The catalyst exhibits remarkable activity and selectivity even at atmospheric pressure and low temperature (1 atm, 80 °C). The influence weight of reaction conditions on the reaction process was obtained through the Artificial Neural Network model, which were reaction pressure, reaction temperature and liquid hourly space velocity in order. The reaction kinetics and mechanism of 5-methyl-2-hexanone preparation by hydrogenation over Pd/γ-Al2O3 catalyst were investigated. The hydrogenation reaction pathway of 5-methyl-3-hexen-2-one was obtained by using Density functional theory calculations, and the mechanism of selective hydrogenation of CC double bonds and CO double bonds was revealed. A kinetic model based on the LHHW model assumption was also proposed and compared with experimental results demonstrating good predictability.

Insight into the Catalytic Oxidation Mechanism of Hydrogen Isotopes by Pt Clusters Confined by Silicalite-1

Highly efficient removal of low concentrations of hydrogen isotope gas in air is crucial for the safe operation of nuclear energy plants. Herein, silicalite-1-confined Pt cluster catalysts were used for the catalytic oxidation of hydrogen isotopes, and the related catalytic mechanism was revealed. Increased temperature in direct hydrogen reduction treatment slightly increased the size of Pt clusters from 1.6 nm at 400 °C to 1.8 nm at 600 °C. The catalyst reduced at 600 °C exhibited excellent performance (99%) in hydrogen isotope oxidation at 75 °C, as well as high stability and catalytic efficiency in continuous and intermittent operation for 7200 min. X-ray absorbance spectroscopy confirmed the existence of Pt clusters in the catalysts, and the theoretical results showed that the total net charge was -0.07 e, indicating a slight charge transfer from the zeolite to the Pt atoms. The metal-support interaction thermally stabilized Pt clusters and altered the metal electronic structure, which enhanced the catalytic activity following a hydroperoxyl (OOH)-mediated route. Based on the low reaction temperature, efficient hydrogen conversion rate, and high stability, the silicalite-1-confined Pt cluster catalyst is expected to be used in hydrogen isotope oxidation treatment to achieve nuclear safety.

Lattice-Confined Single-Atom Catalyst: Preparation, Application and Electron Regulation Mechanism

Lattice-confined single-atom catalyst (LC SAC), featuring exceptional activity, intriguing stability and prominent selectivity, has attracted extensive attention in the fields of various reactions (e.g., hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc.). To design a "smart" LC SAC for catalytic applications, one must systematically comprehend updated advances in the preparation, the application, and especially the peculiar electron regulation mechanism of LC SAC. In this review, the specific preparation methods of LC SAC based on general coordination strategy are updated, and its applications in HER, OER, ORR, N2 reduction reaction (NRR), advanced oxidation processes (AOPs) and so forth are summarized to display outstanding activity, stability and selectivity. Uniquely, the electron regulation mechanisms are first and deeply discussed and can be primarily categorized as electron transfer bridge with monometallic active sites, novel catalytic centers with polymetallic active sites, and positive influence by surrounding environments. In the end, the existing issues and future development directions are put forward with a view to further optimize the performance of LC SAC. This review is expected to contribute to the in-depth understanding and practical application of highly efficient LC SAC.

Unraveling the Synergistic Mechanism of Ir Species with Various Electron Densities over an Ir/ZSM-5 Catalyst Enables High-Efficiency NO Reduction by CO

Selective catalytic reduction using CO as a reducing agent (CO-SCR) has exhibited its application potential in coal-fired, steel, and other industrial sectors. In comparison to NH3-SCR, CO-SCR can achieve synergistic control of CO and NO pollutants, making it a powerful denitrification technology that treats waste with waste. Unfortunately, the competitive adsorption of O2 and NO on CO-SCR catalysts inhibits efficient conversion of NOx under O2-containing conditions. In this work, we obtained two Ir sites with different electron densities, Ir1 single atoms in the oxidized Irδ+ state and Ir0 nanoparticles in the metallic state, by controlled pretreatment of the Ir/ZSM-5 catalyst with H2 at 200 °C. The coexistence of Ir1 single atoms and Ir0 nanoparticles on ZSM-5 creates a synergistic effect, which facilitates the reduction of NO through CO in the presence of O2, following the Langmuir-Hinshelwood mechanism. The ONNO dimer is formed on the Ir1 single atom sites and then spills over to the neighboring Ir0 nanoparticles for subsequent reduction to N2 by CO. Specifically, this tandem reaction enables 83% NO conversion and 100% CO conversion on an Ir-based catalyst at 250 °C under 3% O2.

IrSn Bimetallic Clusters Confined in MFI Zeolites for CO Selective Catalytic Reduction of NOx in the Presence of Excess O2

We developed a simple strategy for preparing IrSn bimetallic clusters encapsulated in pure silicon zeolites via a one-pot hydrothermal synthesis by using diethylamine as a stabilizing agent. A series of investigations verified that metal species have been confined successfully in the inner of MFI zeolites. IrSn bimetallic cluster catalysts were efficient for the CO selective catalytic reduction of NOx in the presence of excess O2. Furthermore, the 13CO temperature-programmed surface reaction results demonstrated that NO2 and N2O could form when most of the CO was transformed into CO2 and that Sn modification could passivate CO oxidation on the IrSn bimetallic clusters, leading to more reductants that could be used for NOx reduction at high temperatures. Furthermore, SO2 can also influence the NOx conversion by inhibiting the oxidation of CO. This study provides a new strategy for preparing efficient environmental catalysts with a high dispersion of metal species.

Bimetallic CoCu-modified Pt species in S-1 zeolite with enhanced stability for propane dehydrogenation

Propane dehydrogenation (PDH) has been an outstanding technique with a bright prospect, which can meet the growing global demand for propylene. However, undesired side reactions result in the deactivation of the Pt-based catalysts, which contribute to the insufficient lifetime of the catalysts. Herein, we describe a novel catalyst by encapsulating bimetallic CoCu-modified Pt species in S-1 zeolite for efficient dehydrogenation of propane, which synergizes the confinement of zeolites and the geometric and electronic effects on Pt species for enhancing the catalyst stability. The introduction of bimetallic additives efficiently promotes the dispersion of platinum and the electron transfer between Pt species and the additives, which greatly prolongs the lifetime of the catalysts. Particularly, no obvious deactivation is observed on 0.2Pt0.3Co0.5CuK@S-1 after 93 h on stream with a weight hourly space velocity (WHSV) of 5.4 h-1, revealing an ultralow deactivation constant of 0.0011 h-1 (t = 909 h). The formation rate of propylene still maintains at a high value of 407 mol gPt-1 h-1 (WHSV = 21.6 h-1) at 580 ℃ even after on pure propane stream for 42 h. The catalyst with the bimetallic CoCu-modified Pt species in S-1 zeolite reveals ultra-high activity and stability for PDH, which is ascribed to the highly dispersed Pt species and the stabilization effect of bimetallic additives on Pt species.

Crystal epitaxy-confined Pd, Ti-bimetallic sites in the MFI zeolite for benzylalcohol oxidation

A general strategy for confining Pd, Ti-bimetallic sites in the MFI zeolite by crystal epitaxy was developed. The tailored spatial intimacy of the bimetallic sites demonstrated distinct catalytic performance for the oxidation of benzylalcohol. The related mechanism was clarified and afforded a valuable pathway for rational catalyst design.

Enhanced Proximity of Rh1,2-Rhn Ensembles Encaged in UiO-67 Boosting Catalytic Conversion of Syngas to Oxygenates

Maintaining high conversion under the premise of high oxygenates selectivity in syngas conversion is important but a formidable challenge in Rh catalysis. Monometallic Rh catalysts provide poor oxygenate conversion efficiency, and efforts have been focused on constructing adjacent polymetallic sites; however, the one-pass yields of C2+ oxygenates over the reported Rh-based catalysts were mostly <20 %. In this study, we constructed a monometallic Rh catalyst encapsulated in UiO-67 (Rh/UiO-67) with enhanced proximity to dual-site Rh1,2-Rhn ensembles. Unexpectedly, this catalyst exhibited high efficacy for oxygenate synthesis from syngas, giving a high oxygenate selectivity of 72.0 % with a remarkable CO conversion of 50.4 %, and the one-pass yield of C2+ oxygenates exceeded 25 %. The state-of-the-art characterizations further revealed the spontaneous formation of an ensemble of Rh single atoms/dimers (Rh1,2) in the proximity of ultrasmall Rh clusters (Rhn) confined within the nanocavity of UiO-67, providing adjacent Rh+-Rh0 dual sites dynamically during the reaction that promote the relay of the undissociated CHO species to the CHx species. Thus, our results open a new route for designing highly efficient Rh catalysts for the conversion of syngas to oxygenates by precisely tuning the ensemble and proximity of the dual active sites in a confined space.

Solvent-Free Synthesis Enables Encapsulation of Subnanometric FeOx Clusters in Pure Siliceous Zeolites for Efficient Catalytic Oxidation Reactions

Metal/metal oxide clusters possess a higher count of unsaturated coordination sites than nanoparticles, providing multiatomic sites that single atoms do not. Encapsulating metal/metal oxide clusters within zeolites is a promising approach for synthesizing and stabilizing these clusters. The unique feature endows the metal clusters with an exceptional catalytic performance in a broad range of catalytic reactions. However, the encapsulation of stable FeOx clusters in zeolite is still challenging, which limits the application of zeolite-encapsulated FeOx clusters in catalysis. Herein, we design a modified solvent-free method to encapsulate FeOx clusters in pure siliceous MFI zeolites (Fe@MFI). It is revealed that the 0.3-0.4 nm subnanometric FeOx clusters are stably encapsulated in the 5/6-membered rings intersectional voids of the pure siliceous MFI zeolites. The encapsulated Fe@MFI catalyst with a Fe loading of 1.4 wt % demonstrates remarkable catalytic activity and recycle stability in the direct oxidation of methane, while also promoting the direct oxidation of cyclohexane, surpassing the performance of conventional zeolite-supported Fe catalysts.

Strengthening the Metal-Acid Interactions by Using CeO2 as Regulators of Precisely Placing Pt Species in ZSM-5 for Furfural Hydrogenation

Understanding the synergism between the metal site and acid site is of great significance in boosting the efficiency of bi-functional catalysts in many heterogeneous reactions, particularly in biomass upgrading. Herein, a "confined auto-redox" strategy is reported to fix CeO2-anchored Pt atoms on the inner wall of a ZSM-5 cage, achieving the target of finely controlling the placements of the two active sites. Compared with the conventional surface-supported counterpart, the encapsulated Pt/CeO2@ZSM-5 catalyst possesses remarkably-improved activity and selectivity, which can convert >99% furfural into cyclopentanone with 97.2% selectivity in 6 h at 160 °C. Besides the excellent catalytic performance, the ordered metal-acid distribution also makes such kind of catalyst an ideal research subject for metal-acid interactions. The following mechanization investigation reveals that the enhancement is strongly related to the unique encapsulation structure, which promotes the migration of the reactants over different active sites, thereby contributing to the tandem reaction.

Regioselective hydroformylation of propene catalysed by rhodium-zeolite

Hydroformylation is an industrial process for the production of aldehydes from alkenes1,2. Regioselective hydroformylation of propene to high-value n-butanal is particularly important, owing to a wide range of bulk applications of n-butanal in the manufacture of various necessities in human daily life3. Supported rhodium (Rh) hydroformylation catalysts, which often excel in catalyst recyclability, ease of separation and adaptability for continuous-flow processes, have been greatly exploited4. Nonetheless, they usually consist of rotationally flexible and sterically unconstrained Rh hydride dicarbonyl centres, only affording limited regioselectivity to n-butanal5-8. Here we show that proper encapsulation of Rh species comprising Rh(I)-gem-dicarbonyl centres within a MEL zeolite framework allows the breaking of the above model. The optimized catalyst exhibits more than 99% regioselectivity to n-butanal and more than 99% selectivity to aldehydes at a product formation turnover frequency (TOF) of 6,500 h-1, surpassing the performance of all heterogeneous and most homogeneous catalysts developed so far. Our comprehensive studies show that the zeolite framework can act as a scaffold to steer the reaction pathway of the intermediates confined in the space between the zeolite framework and Rh centres towards the exclusive formation of n-butanal.

Suppressing Metal Leaching and Sintering in Hydroformylation Reaction by Modulating the Coordination of Rh Single Atoms with Reactants

Hydroformylation reaction is one of the largest homogeneously catalyzed industrial processes yet suffers from difficulty and high cost in catalyst separation and recovery. Heterogeneous single-atom catalysts (SACs), on the other hand, have emerged as a promising alternative due to their high initial activity and reasonable regioselectivity. Nevertheless, the stability of SACs against metal aggregation and leaching during the reaction has rarely been addressed. Herein, we elucidate the mechanism of Rh aggregation and leaching by investigating the structural evolution of Rh1@silicalite-1 SAC in response to different adsorbates (CO, H2, alkene, and aldehydes) by using diffuse reflectance infrared Fourier transform spectroscopy, X-ray adsorption fine structure, and scanning transmission electron microscopy techniques and kinetic studies. It is discovered that the aggregation and leaching of Rh are induced by the strong adsorption of CO and aldehydes on Rh, as well as the reduction of Rh3+ by CO/H2 which weakens the binding of Rh with support. In contrast, alkene effectively counteracts this effect by the competitive adsorption on Rh atoms with CO/aldehyde, and the disintegration of Rh clusters. Based on these results, we propose a strategy to conduct the reaction under conditions of high alkene concentration, which proves to be able to stabilize Rh single atom against aggregation and/or leaching for more than 100 h time-on-stream.

Gallium-based liquid metals as reaction media for nanomaterials synthesis

Gallium-based liquid metals (LMs) and their alloys have gained prominence in the realm of flexible and stretchable electronics. Recent advances have expanded the interest to explore the electron-rich core and interface of LMs to synthesize various nanomaterials, where Ga-based LMs serve as versatile reaction media. In this paper, we delve into the latest developments within this burgeoning field. Our discussion begins by elucidating the unique attributes of LMs that render them suitable as reaction media, including their high metal solubility, low standard reduction potential, self-limiting oxidation and ultra-smooth and "layer" surface. We then provide a comprehensive categorized summary of utilizing these features to fabricate a variety of nanomaterials, including pure metallic materials (metal alloys, metal crystals, porous metals, high-entropy alloys and metallic single atoms), metal-inorganic compounds (2D metal oxides, 2D metallic inorganic compounds and 2D graphitic materials), as well as metal-organic composites (metal-organic frameworks). This paper concludes by discussing the current challenges in this field and exploring potential future directions. The versatility and unique properties of Ga-based LMs are poised to play a pivotal role in the future of nanomaterial science, paving the way for more efficient, sustainable, and innovative technological solutions.

Intermediate Transfer Rates and Solid-State Ion Exchange are Key Factors Determining the Bifunctionality of In2O3/HZSM-5 Tandem CO2 Hydrogenation Catalyst

Identifying the descriptors for the synergistic catalytic activity of bifunctional oxide-zeolite catalysts constitutes a formidable challenge in realizing the potential of tandem hydrogenation of CO2 to hydrocarbons (HC) for sustainable fuel production. Herein, we combined CH3OH synthesis from CO2 and H2 on In2O3 and methanol-to-hydrocarbons (MTH) conversion on HZSM-5 and discerned the descriptors by leveraging the distance-dependent reactivity of bifunctional In2O3 and HZSM-5 admixtures. We modulated the distance between redox sites of In2O3 and acid sites of HZSM-5 from milliscale (∼10 mm) to microscale (∼300 μm) and observed a 3-fold increase in space-time yield of HC and CH3OH (7.5 × 10-5 molC gcat-1 min-1 and 2.5 × 10-5 molC gcat-1 min-1, respectively), due to a 10-fold increased rate of CH3OH advection (1.43 and 0.143 s-1 at microscale and milliscale, respectively) from redox to acid sites. Intriguingly, despite the potential of a three-order-of-magnitude enhanced CH3OH transfer at a nanoscale distance (∼300 nm), the sole product formed was CH4. Our reactivity data combined with Raman, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) revealed the occurrence of solid-state-ion-exchange (SSIE) between acid sites and Inδ+ ions, likely forming In2O moieties, inhibiting C-C coupling and promoting CH4 formation through CH3OH hydrodeoxygenation (HDO). Density functional theory (DFT) calculations further revealed that CH3OH adsorption on the In2O moiety with preadsorbed and dissociated H2 forming an H-In-OH-In moiety is the likely reaction mechanism, with the kinetically relevant step appearing to be the hydrogenation of the methyl species. Overall, our study revealed that efficient CH3OH transfer and prevention of ion exchange are the key descriptors in achieving catalytic synergy in bifunctional In2O3/HZSM-5 systems.

Nickel Single Atom Density-Dependent CO2 Efficient Electroreduction

The transition metal-nitrogen-carbon (M─N─C) with MNx sites has shown great potential in CO2 electroreduction (CO2RR) for producing high value-added C1 products. However, a comprehensive and profound understanding of the intrinsic relationship between the density of metal single atoms and the CO2RR performance is still lacking. Herein, a series of Ni single-atom catalysts is deliberately designed and prepared, anchored on layered N-doped graphene-like carbon (x Ni1@NG-900, where x represents the Ni loading, 900 refers to the temperature). By modulating the precursor, the density of Ni single atoms (DNi) can be finely tuned from 0.01 to 1.19 atoms nm-2. The CO2RR results demonstrate that the CO faradaic efficiency (FECO) predominantly increases from 13.4% to 96.2% as the DNi increased from 0 to 0.068 atoms nm-2. Then the FECO showed a slow increase from 96.2% to 98.2% at -0.82 V versus reversible hydrogen electrode (RHE) when DNi increased from 0.068 to 1.19 atoms nm-2. The theoretical calculations are in good agreement with experimental results, indicating a trade-off relationship between DNi and CO2RR performance. These findings reveal the crucial role of the density of Ni single atoms in determining the CO2RR performance of M─N─C catalysts.

Room-Temperature Chemoselective Hydrogenation of Nitroarene Over Atomic Metal-Nonmetal Catalytic Pair

Constructing atomic catalytic pair emerges as an attractive strategy to achieve better catalytic performance. Herein, an atomic Ir1─P1/NPG catalyst with asymmetric Ir─N2P1 sites that delivers superb activity and selectivity for hydrogenation of various functionalized nitrostyrene is reported. In the hydrogenation reaction of 3-nitrostyrene, Ir1─P1/NPG (NPG refers to N, P-codoped graphene) shows a turnover frequency of 1197 h-1, while the reaction cannot occur over Ir1/NG (NG refers to N-doped graphene). Compared to Ir1/NG, the charge density of the Ir site in Ir1─P1/NPG is greatly elevated, which is conducive to H2 dissociation. Moreover, as revealed by density functional theory calculations and poisoning experiments, the P site in Ir1─P1/NPG is found able to bind nitrostyrene, while the neighboring Ir site provides H to reduce the nitro group in chemoselective hydrogenation of nitrostyrene. This work offers a successful example of establishing atomic catalytic pair for driving important chemical reactions, paving the way for the development of more advanced catalysts to further improve the catalytic performance.

Promoting Catalytic Performance Involving Hydrogen Spillover by Ion Exchange of Pt@A Catalysts to Regulate Reactant Adsorption

Zeolite-encapsulated metal nanoparticle systems have exhibited interesting catalytic performances via the hydrogen spillover process, yet how to further utilize the function of zeolite supports to promote catalytic properties in such a process is still challenging and has rarely been investigated. Herein, to address this issue, the strategy to strengthen the adsorption energy of reactant onto the zeolite surface via a simple ion exchange method has been implemented. Ion-exchanged linde type A (LTA) zeolite-encapsulated platinum nanoclusters (Pt@NaA, Pt@HA, Pt@KA, and Pt@CaA) were prepared to study the influence of ion exchange on the catalytic performance in the model reaction of hydrogenation of acetophenone to 1-phenylethanol. The reaction results showed that the Pt@CaA catalyst exhibited the best catalytic activity in the series of encapsulated catalysts, and the selectivity of 1-phenylethanol approached 100%. As revealed by density functional theory (DFT) calculations and acetophenone temperature-programmed desorption (acetophenone-TPD) experiments, in comparison with introduced cations of Na+, H+, and K+, ion-exchanged Ca2+ on the zeolite maximumly enhanced the adsorption of carbonyl groups in acetophenone, playing a critical role in achieving the highest activity and excellent catalytic selectivity among the Pt@A catalysts.

Review and perspectives on TS-1 catalyzed propylene epoxidation

Titanium silicate zeolite (TS-1) is widely used in the research on selective oxidations of organic substrates by H2O2. Compared with the chlorohydrin process and the hydroperoxidation process, the TS-1 catalyzed hydroperoxide epoxidation of propylene oxide (HPPO) has advantages in terms of by-products and environmental friendliness. This article reviews the latest progress in propylene epoxidation catalyzed by TS-1, including the HPPO process and gas phase epoxidation. The preparation and modification of TS-1 for green and sustainable production are summarized, including the use of low-cost feedstocks, the development of synthetic routes, strategies to enhance mass transfer in TS-1 crystal and the enhancement of catalytic performance after modification. In particular, this article summarizes the catalytic mechanisms and advanced characterization techniques for propylene epoxidation in recent years. Finally, the present situation, development prospect and challenge of propylene epoxidation catalyzed by TS-1 were prospected.

Current Advances on the Single-Atom Nanozyme and Its Bioapplications

Nanozymes, a class of nanomaterials mimicking the function of enzymes, have aroused much attention as the candidate in diverse fields with the arbitrarily tunable features owing to the diversity of crystalline nanostructures, composition, and surface configurations. However, the uncertainty of their active sites and the lower intrinsic deficiencies of nanomaterial-initiated catalysis compared with the natural enzymes promote the pursuing of alternatives by imitating the biological active centers. Single-atom nanozymes (SAzymes) maximize the atom utilization with the well-defined structure, providing an important bridge to investigate mechanism and the relationship between structure and catalytic activity. They have risen as the new burgeoning alternative to the natural enzyme from in vitro bioanalytical tool to in vivo therapy owing to the flexible atomic engineering structure. Here, focus is mainly on the three parts. First, a detailed overview of single-atom catalyst synthesis strategies including bottom-up and top-down approaches is given. Then, according to the structural feature of single-atom nanocatalysts, the influence factors such as central metal atom, coordination number, heteroatom doping, and the metal-support interaction are discussed and the representative biological applications (including antibacterial/antiviral performance, cancer therapy, and biosensing) are highlighted. In the end, the future perspective and challenge facing are demonstrated.

Structural Analysis of Single-Atom Catalysts by X-ray Absorption Spectroscopy

ConspectusMetal nanoparticles (NPs) are one of the most frequently used heterogeneous catalysts. However, only the surface atoms in the NPs can participate in catalytic reactions. To maximize the atomic efficiency, the active sites can be reduced to single atoms. Generally, catalysts that have isolated metal atoms on the surface of a support are called single-atom catalysts (SACs). Many techniques have been developed and applied to probe the structures of SACs. Nevertheless, the structural characterization of SACs is still challenging as it requires the analysis of their structure and properties with atomic and sometimes even subatomic resolution. X-ray absorption spectroscopy (XAS) is a powerful tool in investigating the local coordination environment of SACs since it is element-specific and can provide accurate structural information at the subatomic level (∼0.01 Å).In this Account, we present our perspectives on the structural analysis of SACs from some unique features in the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). We first highlight the importance of the XANES peak features in the sensitive analysis of SAC structures. Such analysis is illustrated to be even more useful in the joint applications of experimental and theoretical XAS. The inspection of the metal-metal (M-M) peak in Fourier transformed EXAFS (FT-EXAFS) spectra is a widely used method to identify the single-atom structure, but this method is not always reliable. Thus, we point out the importance of fitting EXAFS and the thorough interpretation of structural parameters such as coordination numbers (CNs, the number of neighboring atoms next to a chosen atom), bond distances, and the Debye-Waller factor (σ2). The small FT-EXAFS peak for the M-M shell is often ignored in the structural analysis of SACs. Here, it is demonstrated that a careful analysis of these small peaks could help more reliably analyze the SAC structure, and it would be particularly useful in the analysis of a single-atom alloy (SAA). Next, the usefulness of bond distance and σ2 analysis is highlighted, and such analysis is shown to be particularly helpful for the analysis of SAAs, which is rarely discussed in the literature. Given the advantage that XAS data can be collected under various conditions, we show that in situ XAS can provide important information about the catalytic mechanism of the SAC catalyst. In particular, we emphasize the significance of using an advanced in situ technique to extract detailed structural information that is difficult to obtain from regular XAS experiments. Finally, we highlight the importance of jointly using XAS with other complementary methods in a more complete understanding of the structure and properties of SACs. It is anticipated that with further development of XAS techniques and improved data analysis, XAS will become even more powerful in providing insights into the structure-property relationships of SACs, which can advance their practical applications.

Highly dispersed Pd-based pseudo-single atoms in zeolites for hydrogen generation and pollutant disposal

Atomically dispersed metal catalysts with excellent activity and stability are highly desired in heterogeneous catalysis. Herein, we synthesized zeolite-encaged Pd-based pseudo-single atoms via a facile and energy-efficient ligand-protected direct H2 reduction method. Cs-corrected scanning transmission electron microscopy, extended X-ray absorption, and pair distribution function measurements reveal that the metal species are close to atomic-level dispersion and completely confined within the intersectional channels of silicalite-1 (S-1) zeolite with the MFI framework. The Pd@S-1-H exhibits excellent activity and stability in methane combustion reactions with a complete combustion temperature of 390 °C, and no deactivation is observed even after 100 h on stream. The optimized bimetallic 0.8Pd0.2Ni(OH)2@S-1-H catalyst exhibits an excellent H2 generation rate from FA decomposition without any additives, affording a superhigh turnover frequency up to 9308 h-1 at 333 K, which represents the top activity among all of the best heterogeneous catalysts under similar conditions. Significantly, zeolite-encaged metal catalysts are first used for Cr(vi) reduction coupled with formic acid (FA) dehydrogenation and show a superhigh turnover number of 2980 mol(Cr2O72-) mol(Pd)-1 at 323 K, surpassing all of the previously reported catalysts. This work demonstrates that zeolite-encaged pseudo-single atom catalysts are promising in efficient hydrogen storage and pollutant disposal applications.

In Situ Incorporation of Atomically Precise Au Nanoclusters within Zeolites for Ambient Temperature CO Oxidation

Preserving ultrasmall sizes of metal particles is a key challenge in the study of heterogeneous metal-based catalysis. Confining the ultrasmall metal clusters in a well-defined crystalline porous zeolite has emerged as a promising approach to stabilize these metal species. Successful encapsulation can be achieved by the addition of ligated metal complexes to zeolite synthesis gel before hydrothermal synthesis. However, controlling the metal particle size during post-reduction treatment remains a major challenge in this approach. Herein, an in situ incorporation strategy of pre-made atomically precise gold clusters within Na-LTA zeolite was established for the first time. With the assistance of mercaptosilane ligands, the gold clusters were successfully incorporated within the Na-LTA without premature precipitation and metal aggregation during the synthesis. We have demonstrated that the confinement of gold clusters within the zeolite framework offers high stability against sintering, leading to superior CO oxidation catalytic performance (up to 12 h at 30 °C, with a space velocity of 3000 mL g-1 h-1).

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined Rh2O3 clusters in the zeolite which evolve under reaction conditions into single Rh3+ sites. These Rh3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H2 activation. In contrast to Rh2O3, confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO)2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions.

Principle on Selecting the Coordination Ligands of Palladium Precursors Encapsulated by Zeolite for an Efficient Purification of Formaldehyde at Ambient Temperature

High-performance zeolite-supported noble metal catalysts with low loading and high dispersion of active components are the most promising materials for achieving the complete oxidation of formaldehyde (HCHO) at room temperature. In this work, palladium nanoparticles (Pd NPs) with different sizes were successfully encapsulated inside the silicalite-1 (S-1) zeolite framework by using diverse stabling ligands via the one-pot method. Thereafter, the rule on selecting the coordinative ligands for palladium was clarified: more N atoms, a short carbon chain, a smaller branch chain, and bidentate coordination are characteristics of an ideal ligand. Accordingly, the best-performing 0.2Pd@S-1(Ethylenediamine) catalyst exhibited outstanding performance for HCHO oxidation, achieving 100% conversion even at room temperature. High-resolution high-angle annular dark-field scanning transmission electron microscopy (HR HAADF-STEM) and density functional theory (DFT) calculations indicate that the chelate is formed by complexation of Pd2+ ions with ethylenediamine, displaying the smallest spatial site resistance simultaneously with the zeolite synthesis, resulting in Pd located mostly within the 5-membered ring (5-MR) channels of S-1 after calcination, thus limiting the growth of Pd clusters and promoting their dispersion.

Embedded Mo/Mn Atomic Regulation for Durable Acidity-Reinforced HZSM-5 Catalyst toward Energy-Efficient Amine Regeneration

Metal-molecular sieve composites with high acidity are promising solid acid catalysts (SACs) for accelerating sluggish CO2 desorption processes and reducing the energy consumption of CO2 chemisorption systems. However, the production of such SACs through conventional approaches such as loading or ion-exchange methods often leads to uncontrolled and unstable metal distribution on the catalysts, which limits their pore structure regulation and catalytic performance. In this study, we demonstrated a feasible strategy for improving the durability, surface chemical activity, and pore structure of metal-doped HZSM-5 through bimetallic Mo/Mn modification. This strategy involves the immobilization of Mo-O-Mn species confined in an MFI structure by regulating MoO42- anions and Mn2+ cations. The embedded Mn/Mo species of low valence can strongly induce electron transfer and increase the density of compensatory H+ on the MoMn@H catalyst, thereby reducing the CO2 desorption temperature by 8.27 °C and energy consumption by 37% in comparison to a blank. The durability enhancement and activity regulation method used in this study is expected to advance the rational synthesis of metal-molecular sieve composites for energy-efficient CO2 capture using amine regeneration technology.

High-Density Formation of Ir/MoOx Interface through Hybrid Clustering for Chemoselective Nitrostyrene Hydrogenation

To form high-density metal/oxide interfacial active sites, we developed a catalyst preparation method based on hybrid clustering. An iridium-molybdenum (Ir-Mo) hybrid clustering catalyst was prepared by using the hybrid cluster [(IrCp*)4Mo4O16] (Cp* = η5-C5Me5) as the precursor. The Ir-Mo hybrid clustering catalyst selectively reduced the nitro group in the hydrogenation of 4-nitrostyrene, whereas the coimpregnated Ir-Mo catalyst reduced both the nitro and vinyl groups nonselectively. The hybrid clustering catalyst also exhibited high selectivity, even at a high Ir loading (5 wt %), in contrast to Ir/MoO3, which exhibited high selectivity only at low Ir loadings (<0.3 wt %). In situ X-ray absorption spectroscopy analysis revealed that oxygen vacancies were formed at the Ir/MoOx interface in the presence of H2. We concluded that a high-density Ir/MoOx interface contributes to the preferential adsorption of nitro groups on vacant sites, promoting the selective hydrogenation of nitro groups.

Performance Regulation of Single-Atom Catalyst by Modulating the Microenvironment of Metal Sites

Metal-based catalysts, encompassing both homogeneous and heterogeneous types, play a vital role in the modern chemical industry. Heterogeneous metal-based catalysts usually possess more varied catalytically active centers than homogeneous catalysts, making it challenging to regulate their catalytic performance. In contrast, homogeneous catalysts have defined active-site structures, and their performance can be easily adjusted by modifying the ligand. These characteristics lead to remarkable conceptual and technical differences between homogeneous and heterogeneous catalysts. As a recently emerging class of catalytic material, single-atom catalysts (SACs) have become one of the most active new frontiers in the catalysis field and show great potential to bridge homogeneous and heterogeneous catalytic processes. This review documents a brief introduction to SACs and their role in a range of reactions involving single-atom catalysis. To fully understand process-structure-property relationships of single-atom catalysis in chemical reactions, active sites or coordination structure and performance regulation strategies (e.g., tuning chemical and physical environment of single atoms) of SACs are comprehensively summarized. Furthermore, we discuss the application limitations, development trends and future challenges of single-atom catalysis and present a perspective on further constructing a highly efficient (e.g., activity, selectivity and stability), single-atom catalytic system for a broader scope of reactions.

Confining Co-Based Nanocatalysts by Ultrathin Nanotubes for Efficient Transfer Hydrogenation of Biomass Derivatives

Catalytic transfer hydrogenation (CTH) based on non-noble-metal catalysts has emerged as an environmentally friendly way for the utilization of biomass resources. However, the development of efficient and stable non-noble-metal catalysts is crucially challenging due to their inherent inactivity. Herein, a metal-organic framework (MOF)-transformed CoAl nanotube catalyst (CoAl NT160-H) with unique confinement effect was developed via a "MOF transformation and reduction" strategy, which exhibited excellent catalytic activity for the CTH reaction of levulinic acid (LA) to γ-valerolactone (GVL) with isopropanol (2-PrOH) as the H donor. Comprehensive characterizations and experimental investigations uncovered that the confined effect of the ultrathin amorphous Al2O3 nanotubes could modulate the electronic structure and enhance the Lewis acidity of Co nanoparticles (NPs), thus contributing to the adsorption and activation of LA and 2-PrOH. The synergy between the electropositive Co NPs and Lewis acid-base sites of the CoAl NT160-H catalyst facilitated the transfer of α-H in 2-PrOH to the C atom of carbonyl in LA during the CTH process via a Meerwein-Ponndorf-Verley mechanism. Moreover, the confined Co NPs embedded on am-Al2O3 nanotubes endowed the CoAl NT160-H catalyst with superior stability and the catalytic activity was nearly unchanged for at least ten cycles, far surpassing that of the Co/am-Al2O3 catalyst prepared by the traditional impregnation method.

Construction of a Novel Cascade Electrolysis-Heterocatalysis System by Using Zeolite-Encaged Ultrasmall Palladium Catalysts for H2 O2 Generation

In situ generation of hydrogen peroxide (H₂ O₂ ) has attracted extensive attention, especially in water treatment. However, traditional anthraquinones can only produce high-concentration H₂ O₂ and its transportation and storage are not convenient and dangerous. Herein, an in situ and on-demand strategy to produce H₂ O₂ by using a cascade water electrolysis together with a heterocatalysis system is provided. Beginning with water, H_2, and O₂ can be generated via electrolysis and then react with each other to produce H₂ O₂ immediately on efficient zeolite-encaged ultrasmall Pd catalysts. Significantly, the H₂ O₂ generation rate in the optimized cascade system reaches up to 0.85 mol L^-1 h^-1 g_Pd ^-1 , overcoming most of the state-of-the-art catalysts in previous literature. The confinement effect of zeolites is not only beneficial to the formation of highly dispersed metal species, promoting the H₂ O₂ generation, but also inhibits the H₂ O₂ decomposition, enhancing the production yield of H₂ O₂ . In addition, the effect of electrolytes, sizes of Pd species, as well as zeolite acidity are also systematically studied. This work provides a new avenue for H₂ O₂ generation via a highly efficient cascade electrolysis-heterocatalysis system by using zeolite-supported metal catalysts. The high catalytic efficiency and green process for H₂ O₂ generation make it very promising for further practical applications.

Immobilizing Metal Nanoparticles on Hierarchically Porous Organic Cages with Size Control for Enhanced Catalysis

Incorporating metal nanoparticles (MNPs) into porous composites with controlled size and spatial distributions is beneficial for a broad range of applications, but it remains a synthetic challenge. Here, we present a method to immobilize a series of highly dispersed MNPs (Pd, Ir, Pt, Rh, and Ru) with controlled size (<2 nm) on hierarchically micro- and mesoporous organic cage supports. Specifically, the metal-ionic surfactant complexes serve as both metal precursors and mesopore-forming agents during self-assembly with a microporous imine cage CC3, resulting in a uniform distribution of metal precursors across the resultant supports. The functional heads on the ionic surfactants as binding sites, together with the nanoconfinement of pores, guide the nucleation and growth of MNPs and prevent their agglomeration after chemical reduction. Moreover, the as-synthesized Pd NPs exhibit remarkable activity and selectivity in the tandem reaction due to the advantages of ultrasmall particle size and improved mass diffusion facilitated by the hierarchical pores.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Atomically dispersed Au anchored on CeO2to enhancing the antioxidant activity

The modification of Au nanoparticles can improve the antioxidant activity of CeO₂, however, nano Au/CeO₂has also met some problems such as low atomic utilization, the limit of reaction conditions, and high cost. Au single atom catalysts can well solve the above-mentioned problems, but there are some contradictory results about the activity of single atom Au₁/CeO₂and nano Au/CeO₂. Here, we synthesized rod-like Au single atom Au/CeO₂(0.4% Au₁/CeO₂) and nano Au/CeO₂(1% Au/CeO₂, 2% Au/CeO₂and 4% Au/CeO₂), and their antioxidant activity from strong to weak is 0.4% Au₁/CeO₂, 1% Au/CeO₂, 2% Au/CeO₂and 4% Au/CeO₂, respectively. The higher antioxidant activity of 0.4% Au₁/CeO₂is mainly due to the high Au atomic utilization ratio and the stronger charge transfer between Au single atoms and CeO₂, resulting in the higher content of Ce³⁺. Due to the coexistence of Au single atoms and Au NPs in 2% Au/CeO₂, the antioxidant activity 2% Au/CeO₂is higher than that of 4% Au/CeO₂. And the enhancement effect of Au single atoms was not affected by the concentration of ·OH and material concentration. These results can promote the understanding of the antioxidant activity of 0.4% Au₁/CeO₂and promote its application.

Ptychographic measurements of varying size and shape along zeolite channels

Sub-angstrom resolution imaging of porous materials like zeolites is important to reveal their structure-property relationships involved in ion exchange, molecule adsorption and separation, and catalysis. Using multislice electron ptychography, we successfully measured the atomic structure of zeolite at sub-angstrom lateral resolution for 100-nanometer-thick samples. Both lateral and depth deformations of the straight channels are mapped, showing the three-dimensional structural inhomogeneity and flexibility. Since most zeolites in industrial applications are usually tens to hundreds of nanometers thick, the sub-angstrom resolution imaging and accurate measurements of depth-dependent local structures with electron ptychography at low-dose condition will find wide applications in porous materials close to their industrially relevant conditions.

Cobalt-Promoted Noble-Metal Catalysts for Efficient Hydrogen Generation from Ammonia Borane Hydrolysis

Ammonia borane (AB) has been regarded as a promising material for chemical hydrogen storage. However, the development of efficient, cost-effective, and stable catalysts for H₂ generation from AB hydrolysis remains a bottleneck for realizing its practical application. Herein, a step-by-step reduction strategy has been developed to synthesize a series of bimetallic species with small sizes and high dispersions onto various metal oxide supports. Superior to other non-noble metal species, the introduction of Co species can remarkably and universally promote the catalytic activity of various noble metals (e.g., Pt, Rh, Ru, and Pd) in AB hydrolysis reactions. The optimized Pt_0.1%Co_3%/TiO₂ catalyst exhibits a superhigh H₂ generation rate from AB hydrolysis, showing a turnover frequency (TOF) value of 2250 mol_H2 mol_Pt^-1 min^-1 at 298 K. Such a TOF value is about 10 and 15 times higher than that of the monometal Pt/TiO₂ and commercial Pt/C catalysts, respectively. The density functional theory (DFT) calculation reveals that the synergy between Pt and CoO species can remarkably promote the chemisorption and dissociation of water molecules, accelerating the H₂ evolution from AB hydrolysis. Significantly, the representative Pt_0.25%Co_3%/TiO₂ catalyst exhibits excellent stability, achieving a record-high turnover number of up to 215,236 at room temperature. The excellent catalytic performance, superior stability, and low cost of the designed catalysts create new prospects for their practical application in chemical hydrogen storage.

Atomic-Level Imaging of Zeolite Local Structures Using Electron Ptychography

Zeolites are among the most important heterogeneous catalysts, widely employed in separation reaction, fine chemical production, and petroleum refining. Through rational design of the frameworks, zeolites with versatile functions can be synthesized. Local imaging of zeolite structures at the atomic scale, including the basic framework atoms (Si, Al, and O) and extra-framework cations, is necessary to understand the structure-function relationship of zeolites. Herein, we implemented electron ptychography into direct imaging of local structures of two zeolites, Na-LTA and ZSM-5. Not only all the framework atoms but also extra-framework Na⁺ cations with only 1/4 occupation probabilities in Na-LTA were directly observed. Local structures of ZSM-5 zeolites having guest molecules among channels with different orientations were also unraveled using different reconstruction algorithms. The approach presented here provides a new way to locally image zeolites structure, and it is expected to be an essential key for further studying and tuning zeolites active sites at the atomic level.

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

In situ utilization of photogenerated hydrogen for hydrogenation reaction over a covalent organic framework

A fully sp²-carbon conjugated COF (Py-FTP-COF) was designed and synthesized, exhibiting excellent hydrogen evolution rate of 5.22 mmol g^-1 h^-1. More importantly, in situ hydrogenation of nitroarenes under visible-light irradiation without any additional hydrogen source was successfully accomplished for the first time over COF-based materials.

Design of Single-Atom Catalysts and Tracking Their Fate Using Operando and Advanced X-ray Spectroscopic Tools

The potential of operando X-ray techniques for following the structure, fate, and active site of single-atom catalysts (SACs) is highlighted with emphasis on a synergetic approach of both topics. X-ray absorption spectroscopy (XAS) and related X-ray techniques have become fascinating tools to characterize solids and they can be applied to almost all the transition metals deriving information about the symmetry, oxidation state, local coordination, and many more structural and electronic properties. SACs, a newly coined concept, recently gained much attention in the field of heterogeneous catalysis. In this way, one can achieve a minimum use of the metal, theoretically highest efficiency, and the design of only one active site-so-called single site catalysts. While single sites are not easy to characterize especially under operating conditions, XAS as local probe together with complementary methods (infrared spectroscopy, electron microscopy) is ideal in this research area to prove the structure of these sites and the dynamic changes during reaction. In this review, starting from their fundamentals, various techniques related to conventional XAS and X-ray photon in/out techniques applied to single sites are discussed with detailed mechanistic and in situ/operando studies. We systematically summarize the design strategies of SACs and outline their exploration with XAS supported by density functional theory (DFT) calculations and recent machine learning tools.

Surface and Interface Coordination Chemistry Learned from Model Heterogeneous Metal Nanocatalysts: From Atomically Dispersed Catalysts to Atomically Precise Clusters

The surface and interface coordination structures of heterogeneous metal catalysts are crucial to their catalytic performance. However, the complicated surface and interface structures of heterogeneous catalysts make it challenging to identify the molecular-level structure of their active sites and thus precisely control their performance. To address this challenge, atomically dispersed metal catalysts (ADMCs) and ligand-protected atomically precise metal clusters (APMCs) have been emerging as two important classes of model heterogeneous catalysts in recent years, helping to build bridge between homogeneous and heterogeneous catalysis. This review illustrates how the surface and interface coordination chemistry of these two types of model catalysts determines the catalytic performance from multiple dimensions. The section of ADMCs starts with the local coordination structure of metal sites at the metal-support interface, and then focuses on the effects of coordinating atoms, including their basicity and hardness/softness. Studies are also summarized to discuss the cooperativity achieved by dual metal sites and remote effects. In the section of APMCs, the roles of surface ligands and supports in determining the catalytic activity, selectivity, and stability of APMCs are illustrated. Finally, some personal perspectives on the further development of surface coordination and interface chemistry for model heterogeneous metal catalysts are presented.

Nitrogen and Phosphorus Dual-Coordinated Single-Atom Mn: MnN2P Active Sites for Catalytic Transfer Hydrogenation of Nitroarenes

The coordination environment of atomically metal sites can modulate the electronic states and geometric structure of single-atom catalysts, which determine their catalytic performance. In this work, the porous carbon-supported N, P dual-coordinated Mn single-atom catalyst was successfully prepared via the phosphatization of zeolitic imidazolate frameworks and followed by pyrolysis at 900 °C. The optimal Mn₁-N/P-C catalyst with atomic MnN₂P structure has displayed better catalytic activity than the related catalyst with Mn-N_x structure in catalytic transfer hydrogenation of nitroarenes using formic acid as the hydrogen donor. We find that the doping of P source plays a crucial role in improving the catalytic performance, which affects the morphology and electronic properties of catalyst. This is the first Mn heterogeneous catalyst example for the reduction of nitroarenes, and it also revealed that the MnN₂P configuration is a more promising alternative in heterogeneous catalysis.