Surface‐Polarity‐Induced Spatial Charge Separation Boosts Photocatalytic Overall Water Splitting on GaN Nanorod Arrays

Dipolar Microenvironment Engineering Enabled by Electron Beam Irradiation for Boosting Catalytic Performance

Creating a diverse dipolar microenvironment around the active site is of great significance for the targeted induction of intermediate behaviors to achieve complicated chemical transformations. Herein, an efficient and general strategy is reported to construct hypercross-linked polymers (HCPs) equipped with tunable dipolar microenvironments by knitting arene monomers together with dipolar functional groups into porous network skeletons. Benefiting from the electron beam irradiation modification technique, the catalytic sites are anchored in an efficient way in the vicinity of the microenvironment, which effectively facilitates the processing of the reactants delivered to the catalytic sites. By varying the composition of the microenvironment scaffold structure, the contact and interaction behavior with the reaction participants can be tuned, thereby affecting the catalytic activity and selectivity. As a result, the framework catalysts produced in this way exhibit excellent catalytic performance in the synthesis of glycinate esters and indole derivatives. This manipulation is reminiscent of enzymatic catalysis, which adjusts the internal polarity environment and controls the output of products by altering the scaffold structure.

A Visible Light-Responsive TiO2 Photocathode Achieved by a Rh Dopant

Developing an efficient and stable photocathode material for photoelectrochemical solar water splitting remains challenging. Herein, we demonstrate the potential of rutile TiO2 as a photocathode by Rh doping with visible light absorption up to 640 nm and an onset potential of 0.9 V versus the reversible hydrogen electrode. The dopant transforms the rutile host from an n-type semiconductor to a p-type one, as confirmed by the Mott-Schottky curve and kelvin probe force microscopy. Physical and photoelectrochemical analyses further suggest that the doping mechanism is dependent on concentration. Lower levels of dopants generate localized Rh3+, while higher levels favor Rh4+ that interacts more strongly with the O 2p orbitals. The latter is found not only to extend the visible light absorption range but also to facilitate charge transport. This work elucidates the role of the Rh dopant in adjusting the photoelectrochemical behavior of TiO2, and it provides a promising photocathode material for solar energy conversion.

Thioredoxin Reductase-Mediated Reaction Evokes In Situ Surface Polarization Effect on BiOIO3: Toward a New Sensing Strategy for Cathodic Photoelectrochemistry

We have witnessed the fast progress of cathodic photoelectrochemistry over the past decades, though its signal transduction tactic still lacks diversity. Exploring new sensing strategies for cathodic photoelectrochemistry is extremely demanding yet hugely challenging. This article puts forward a unique idea to incorporate an enzymatic reaction-invoked surface polarization effect (SPE) on the surface of BiOIO3 to implement an innovative cathodic photoelectrochemical (PEC) bioanalysis. Specifically, the thioredoxin reductase (TrxR)-mediated reaction produced the polar glutathione (GSH), which spontaneously coordinated to the surface of BiOIO3 and induced SPE by forming a polarized electric field, resulting in improved electron (e-) and hole (h+) pair separation efficiency and an enhanced photocurrent output. Correlating this phenomenon with the detection of TrxR exhibited a high performance in terms of sensitivity and selectivity, achieving a linear range of 0.007-0.5 μM and a low detection limit of 2.0 nM (S/N = 3). This study brings refreshing inspiration for the cathodic PEC signal transduction tactic through enzyme-mediated in situ reaction to introduce SPE, which enriches the diversity of available signaling molecules. Moreover, this study unveils the potential of in situ generated SPE for extended and futuristic applications.

p-n heterojunction of nickel oxide on titanium dioxide nanosheets for hydrogen and value-added chemicals coproduction from glycerol photoreforming

Selective photocatalysis to simultaneously produce sustainable hydrogen and value-added chemicals from biomass or biomass derivates is attracting extensive investigations. However, the lack of bifunctional photocatalyst greatly limits the possibility to realize the "one stone kills two birds" scenario. Herein, anatase titanium dioxide (TiO₂) nanosheets are rationally designed as the n-type semiconductor, combining with nickel oxide (NiO) nanoparticles, the p-type semiconductor, resulting in the formation of a p-n heterojunction structure. The shorten charge transfer path and the spontaneous formation of p-n heterojunction endow the photocatalyst with efficient spatial separation of photogenerated electrons and holes. As a result, TiO₂ accumulates electrons for efficient hydrogen generation while NiO collects holes to selectively oxidize glycerol into value-added chemicals. The results showed that by loading 5% nickel into the heterojunction caused a remarkable rise in the generation of hydrogen (H₂). The combination of NiO-TiO₂ created 4000 µmolh^-1g^-1 of H₂, which is 50% greater than the H₂ production from pure nanosheet TiO₂ and 63 times more than the H₂ production from commercial nanopowder TiO₂. Then, by changing loading amount of Ni, it is found that when 7.5 % of Ni is loaded the highest amount of hydrogen production achieved, 8000 µmolh^-1g^-1. By employing best sample (S3), 20 % of glycerol converted to value added products, glyceraldehyde and dihydroxyacetone. The feasibility study revealed that glyceraldehyde generates the largest portion of yearly earnings at 89%, while dihydroxyacetone and H₂ account for 11% and 0.03% of the annual revenue, respectively. This work provides a good example to simultaneously produce green hydrogen and valuable chemicals with the rational design of dually functional photocatalyst.

Enhanced Photocatalytic Activity of Two-Dimensional Polar Monolayer SiTe for Water-Splitting via Strain Engineering

A two-dimensional (2D) polar monolayer with a polarization electric field can be used as a potential photocatalyst. In this work, first principle calculations were used to investigate the stability and photocatalytic properties of 2D polar monolayer SiTe as a potential promising catalyst in water-splitting. Our results show that the 2D polar monolayer SiTe possesses an indirect band gap of 2.41 eV, a polarization electric field from the (001) surface to the (001¯) surface, a wide absorption region, and a suitable band alignment for photocatalytic water-splitting. We also discovered that the photocatalytic activity of 2D polar monolayer SiTe could be effectively tuned through strain engineering. Additionally, strain engineering, particularly compressive strain in the range from −1% to −3%, can enhance the photocatalytic activity of 2D polar monolayer SiTe. Overall, our findings suggest that 2D polar monolayer SiTe has the potential to be a promising catalyst for photocatalytic water-splitting using visible light.

An NIR-Driven Upconversion/C3N4/CoP Photocatalyst for Efficient Hydrogen Production by Inhibiting Electron-Hole Pair Recombination for Alzheimer's Disease Therapy

Redox imbalance and abnormal amyloid protein (Aβ) buildup are key factors in the etiology of Alzheimer's disease (AD). As an antioxidant, the hydrogen molecule (H₂) has the potential to cure AD by specifically scavenging highly harmful reactive oxygen species (ROS) such as ^•OH. However, due to the low solubility of H₂ (1.6 ppm), the traditional H₂ administration pathway cannot easily achieve long-term and effective accumulation of H₂ in the foci. Therefore, how to achieve the continuous release of H₂ in situ is the key to improve the therapeutic effect on AD. As a corollary, we designed a rare earth ion doped g-C₃N₄ upconversion photocatalyst, which can respond to NIR and realize the continuous production of H₂ by photocatalytic decomposition of H₂O in biological tissue, which avoids the problem of the poor penetration of visible light. The introduction of CoP cocatalyst accelerates the separation and transfer of photogenerated electrons in g-C₃N₄, thus improving the photocatalytic activity of hydrogen evolution reaction. The morphology of the composite photocatalyst was shown by transmission electron microscopy, and the crystal structure was studied by X-ray diffractometry and Raman analysis. In addition, the ability of g-C₃N₄ to chelate metal ions and the photothermal properties of CoP can inhibit Aβ and reduce the deposition of Aβ in the brain. Efficient in situ hydrogen production therapy combined with multitarget synergism solves the problem of a poor therapeutic effect of a single target. In vivo studies have shown that UCNP@CoP@g-C₃N₄ can reduce Aβ deposition, improve memory impairment, and reduce neuroinflammation in AD mice.

Metal-Support Interaction-Promoted Photothermal Catalytic Methane Reforming into Liquid Fuels

Clean and renewable photocatalytic technology for methane reforming into high-value liquid fuels, such as methanol, is a promising strategy for commercial industrial applications. However, poor charge separation, sluggish methane activation, and excessive oxidation collectively inhibit the production of methanol from photocatalytic methane reforming. Herein, we have developed enhanced metal-support interactions between a GaN nanowire photocatalyst and a Cu nanoparticle (CuNP) cocatalyst via p-doping in GaN. CuNP-loaded p-type GaN (Cu/p-GaN) with enhanced metal-support interaction has 3.5-fold higher activity (12.8 mmol g^-1 h^-1, higher than previous reports) for methanol production in photothermal catalytic methane reforming with oxygen as an oxidant and sunlight as the sole energy source than CuNP-loaded intrinsic GaN (Cu/i-GaN) or n-type GaN (Cu/n-GaN). In-situ IR measurements indicate that enhanced metal-support interaction significantly promotes activation of methane and formation of methanol. Combining with X-ray photoelectron spectroscopy (XPS), density functional theory (DFT) simulations demonstrate that this enhanced metal-support interaction in Cu/p-GaN greatly improves electron transfer from p-GaN photocatalysts to the 3d states of CuNP cocatalysts through the interface between them. Catalytic pathway simulations further reveal that the enhanced metal-support interaction in Cu/p-GaN also desirably decreases the reaction energy of rate-determining methanol desorption, which decreases the excessive oxidation of the produced methanol and accelerates the regeneration of surface catalytic sites. These studies and findings offer critical insights into the design and development of metal nanoparticle-loaded photocatalysts for photocatalysis-based methane reforming into methanol.

Charge Separation by Creating Band Bending in Metal-Organic Frameworks for Improved Photocatalytic Hydrogen Evolution

Metal-organic frameworks (MOFs) have been intensively studied as a class of semiconductor-like materials in photocatalysis. However, band bending, which plays a crucial role in semiconductor photocatalysis, has not yet been demonstrated in MOF photocatalysts. Herein, a representative MOF, MIL-125-NH₂ , is integrated with the metal oxides (MoO₃ and V₂ O₅ ) that feature appropriate work functions and energy levels to afford the corresponding MOF composites. Surface photovoltage results demonstrate band bending in the MOF composites, which gives rise to the built-in electric field of MIL-125-NH₂ , boosting the charge separation. As a result, the MOF composites present 56 and 42 times higher activities, respectively, compared to the pristine MOF for photocatalytic H₂ production. Upon depositing Pt onto the MOF, ∼6 times higher activity is achieved. This work illustrates band bending of MOFs for the first time, supporting their semiconductor-like nature, which would greatly promote MOF photocatalysis.

Wavelength-Dependent Bifunctional Plasmonic Photocatalysis in Au/Chalcopyrite Hybrid Nanostructures

Excited, or "hot" charge carrier generation and transfer driven by the decay of localized surface plasmon resonances (LSPRs) are key steps in plasmonic photocatalysis. Hybrid structures that contain both metal and semiconductor building blocks facilitate the extraction of reactive charge carriers and their utilization for photoelectrocatalysis. Additional functionality arises from hybrid structures that combine noble metal nanostructures with semiconductor components, such as chalcopyrite (CuFeS2) nanocrystals (NCs), which by themselves support quasistatic resonances. In this work, we use a hybrid membrane to integrate Au nanorods (NRs) with a longitudinal LSPR at 745 nm and CuFeS2 NCs with a resonance peak at 490 nm into water-stable nanocomposites for robust and bifunctional photocatalysis of oxygen and hydrogen evolution reactions in a wavelength-dependent manner. Excitation of NRs or NCs in the nanocomposite correlates with increased hydrogen or oxygen evolution, respectively, consistent with a light-driven electron transfer between the metal and semiconductor building blocks, the direction of which depends on the wavelength. The bifunctional photoreactivity of the nanocomposite is enhanced by Cu(I)/Cu(II)-assisted catalysis on the surface of the NCs.

Unveiling the charge transfer dynamics steered by built-in electric fields in BiOBr photocatalysts

Construction of internal electric fields (IEFs) is crucial to realize efficient charge separation for charge-induced redox reactions, such as water splitting and CO₂ reduction. However, a quantitative understanding of the charge transfer dynamics modulated by IEFs remains elusive. Here, electron microscopy study unveils that the non-equilibrium photo-excited electrons are collectively steered by two contiguous IEFs within binary (001)/(200) facet junctions of BiOBr platelets, and they exhibit characteristic Gaussian distribution profiles on reduction facets by using metal co-catalysts as probes. An analytical model justifies the Gaussian curve and allows us to measure the diffusion length and drift distance of electrons. The charge separation efficiency, as well as photocatalytic performances, are maximized when the platelet size is about twice the drift distance, either by tailoring particle dimensions or tuning IEF-dependent drift distances. The work offers great flexibility for precisely constructing high-performance particulate photocatalysts by understanding charge transfer dynamics.

Recent advances and perspectives for solar-driven water splitting using particulate photocatalysts

The conversion and storage of solar energy to chemical energy via artificial photosynthesis holds significant potential for optimizing the energy situation and mitigating the global warming effect. Photocatalytic water splitting utilizing particulate semiconductors offers great potential for the production of renewable hydrogen, while this cross-road among biology, chemistry, and physics features a topic with fascinating interdisciplinary challenges. Progress in photocatalytic water splitting has been achieved in recent years, ranging from fundamental scientific research to pioneering scalable practical applications. In this review, we focus mainly on the recent advancements in terms of the development of new light-absorption materials, insights and strategies for photogenerated charge separation, and studies towards surface catalytic reactions and mechanisms. In particular, we emphasize several efficient charge separation strategies such as surface-phase junction, spatial charge separation between facets, and polarity-induced charge separation, and also discuss their unique properties including ferroelectric and photo-Dember effects on spatial charge separation. By integrating time- and space-resolved characterization techniques, critical issues in photocatalytic water splitting including photoinduced charge generation, separation and transfer, and catalytic reactions are analyzed and reviewed. In addition, photocatalysts with state-of-art efficiencies in the laboratory stage and pioneering scalable solar water splitting systems for hydrogen production using particulate photocatalysts are presented. Finally, some perspectives and outlooks on the future development of photocatalytic water splitting using particulate photocatalysts are proposed.

Highly Efficient Recovery of H2 from Industrial Waste by Sunlight-Driven Photoelectrocatalysis over a ZnS/Bi2S3/ZnO Photoelectrode

Hydrogen (H₂) fuel production from hazardous contaminants is not only of economic importance but also of significance for the environment and health. Hydrogen production is exemplified in this work by using bismuth sulfide (Bi₂S₃) sandwiched in between zinc sulfide (ZnS) and zinc oxide (ZnO) as dual-heterojunction photoelectrode to photoelectrochemically extract H₂ from sulfide- and sulfite-containing wastewater, which is emitted in enormous quantities from the petrochemical industries. The H₂ evolution rate over the ZnS/Bi₂S₃/ZnO photoelectrode under solar illumination amounts to 112.8 μmol cm^-2 h^-1, of which the photocurrent density in the meantime reaches 10.7 mA cm^-2, by far exceeding those reported for additional Bi₂S₃-based counterparts in the literature. Such superior performance is ascribed on one hand to the broadband sunlight-harvesting ability of Bi₂S₃ that gives rise to respectable photoexcited electron-hole pairs. These photogenerated charge carriers are subsequently rectified by the built-in electric field at the ZnS/Bi₂S₃ and Bi₂S₃/ZnO heterojunctions to flow in the opposite directions to well circumvent the recombination losses and, most importantly, in turn contribute substantially to the H₂ evolution reaction.

Photo-assisted sequential assembling of uniform metal nanoclusters on semiconductor support

Dispersing metal nanoclusters on the oxide supports is attracting close attention in heterogeneous catalysis, but great challenges still lie in controlling the size and dispersion of nanoclusters due to the inevitable agglomeration. Here, we propose a sequential photochemical deposition strategy named “first store, and then release” to uniformly fabricate the size-controlling noble metal nanoclusters on semiconductor oxides. Using the typical semiconductor TiO₂, the photoexcited electrons can be first stored as reduced species (e.g. Ti³⁺) under irradiation and the Ti³⁺ species can optimize both the nucleation and growth processes in dark reaction, resulting in a uniform dispersing of various noble metals (Au, Pt, Ag etc.) with size diameters of ∼1 nm. The nanoclusters catalysts exhibited superior performance in catalytic oxidation of HCHO compared with that of nanoparticles. This work brings a new and useful strategy to construct size-controlling noble metals on the oxide supports for heterogeneous catalysis and the related fields.

•

Metal nanoclusters were deposited on semiconductors via sequential photodeposition

•

Ti³⁺ species store the photoelectrons and optimize the nucleation and growth processes

•

The catalysts exhibit superior performance in catalytic oxidation of HCHO

Surface polarization of BiOI to boost the photoelectrochemical signal transduction for high performance bioassays

The surface hydroxylation induced polarization (SHIP) is disclosed as an effective tactic to promote the cathodic photoelectrochemical (PEC) communication of bismuth oxyiodide with doxorubicin (Dox) by as large as three...

Piezo-phototronic effect on photocatalysis, solar cells, photodetectors and light-emitting diodes

The piezo-phototronic effect (a coupling effect of piezoelectric, photoexcitation and semiconducting properties, coined in 2010) has been demonstrated to be an ingenious and robust strategy to manipulate optoelectronic processes by tuning the energy band structure and photoinduced carrier behavior. The piezo-phototronic effect exhibits great potential in improving the quantum yield efficiencies of optoelectronic materials and devices and thus could help increase the energy conversion efficiency, thus alleviating the energy shortage crisis. In this review, the fundamental principles and challenges of representative optoelectronic materials and devices are presented, including photocatalysts (converting solar energy into chemical energy), solar cells (generating electricity directly under light illumination), photodetectors (converting light into electrical signals) and light-emitting diodes (LEDs, converting electric current into emitted light signals). Importantly, the mechanisms of how the piezo-phototronic effect controls the optoelectronic processes and the recent progress and applications in the above-mentioned materials and devices are highlighted and summarized. Only photocatalysts, solar cells, photodetectors, and LEDs that display piezo-phototronic behavior are reviewed. Material and structural design, property characterization, theoretical simulation calculations, and mechanism analysis are then examined as strategies to further enhance the quantum yield efficiency of optoelectronic devices via the piezo-phototronic effect. This comprehensive overview will guide future fundamental and applied studies that capitalize on the piezo-phototronic effect for energy conversion and storage.

Crystal phase engineering boosted photo-electrochemical kinetics of CoSe2 for oxygen evolution catalysis

Crystal phase is an important parameter that can determine the electronic structure and catalytic properties of catalysts. In this work, we report the crystal phase dependent photo- and electrocatalytic oxygen evolution reaction (OER) performance of CoSe₂. In electrocatalytic reaction, we firstly found that CoSe₂ with orthorhombic phase (o-CoSe₂) showed a higher OER performance than that of CoSe₂ with cubic phase (c-CoSe₂). In the further exploration of photocatalytic application using Fe₂O₃ as light harvester and CoSe₂ as cocatalysts, o-CoSe₂/Fe₂O₃ can realize the qualitative changes of photocatalytic oxygen evolution performance from "0″ to "1". As contrast, c-CoSe₂/Fe₂O₃ cannot work in photocatalytic oxygen evolution process under the same condition. Experimental and theoretical analysis uncover that, the key factor leading to the crystal phase-dependent performance is the decreased activation barrier of H₂O on o-CoSe₂ surface. This work opens up an opportunity of correlating the CoSe₂ crystal phase with performance in OER.

TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Driven Water-Splitting

The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and cost-effective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) A large bandgap between optical and acoustic phonon modes and (2) No electronic bandgap, which allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.

Extraterrestrial artificial photosynthetic materials for in-situ resource utilization

Aerospace milestones in human history, including returning to the moon and manned Martian missions, have been implemented in recent years. Space exploration has become one of the global common goals, and to ensure the survival and development of human beings in the extraterrestrial extreme environment has been becoming the basic ability and technology of manned space exploration. For the purpose of fulfilling the goal of extraterrestrial survival, researchers in Nanjing University and the China Academy of Space Technology proposed extraterrestrial artificial photosynthesis (EAP) technology. By simulating the natural photosynthesis of green plants on the Earth, EAP converts CO2/H2O into fuel and O2 in an in-situ, accelerated and controllable manner by using waste CO2 in the confined space of spacecraft, or abundant CO2 resources in extraterrestrial celestial environments, e.g. Mars. Thus, the material loading of manned spacecraft can be greatly reduced to support affordable and sustainable deep space exploration. In this paper, EAP technology is compared with existing methods of converting CO2/H2O into fuel and O2 in the aerospace field, especially the Sabatier method and Bosch reduction method. The research progress of possible EAP materials for in-situ utilization of extraterrestrial resources are also discussed in depth. Finally, this review lists the challenges that the EAP process may encounter, which need to be focused on for future implementation and application. We expect to deepen the understanding of artificial photosynthetic materials and technologies, and aim to strongly support the development of manned spaceflight.

Effects of Different Delocalized π-Conjugated Systems Towards the TiO2-Based Hybrid Photocatalysts

Modulating the structure of a photocatalyst at the molecular level can improve the photocatalytic efficiency and provides a guide for the synthesis of highly qualified photocatalysts. In this study, TiO2 was modified by various organic compounds to form different TiO2-based hybrid photocatalysts. 1,10-Phenanthroline (Phen) is an organic material with delocalized π-conjugated systems. It was used to modify TiO2 to form the hybrid photocatalyst Phen/TiO2. Furthermore, 1,10-phenanthrolin-5-amine (Phen-NH2) and 1,10-phenanthroline-5-nitro (Phen-NO2) were also used to modify TiO2 to form NH2-Phen/TiO2 and NO2-Phen/TiO2, respectively. The samples of TiO2, Phen/TiO2, NO2-Phen/TiO2, and NH2-Phen/TiO2 were carefully characterized, and their photocatalytic performance was compared. The results indicated that the photocatalytic efficiency followed the order of NH2-Phen/TiO2 > NO2-Phen/TiO2 > Phen/TiO2 > TiO2. It could be found that modifying TiO2 with different organic compounds containing delocalized π-conjugated systems could enhance the photocatalytic ability; furthermore, the level of this enhancement could be modulated by different delocalized π-conjugated systems.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Piezocatalytic Effect Induced Hydrogen Production from Water over Non-noble Metal Ni Deposited Ultralong GaN Nanowires

Piezoelectric material-based catalysis that relies on an external stress-induced piezopotential has been demonstrated to be an effective strategy toward various chemical reactions. In this work, non-noble metal Ni-decorated ultralong monocrystal GaN nanowires (NWs) were prepared through a chemical vapor deposition (CVD) technique, followed by a photodeposition method. The piezocatalytic activity of the GaN NWs was enhanced by ∼9 times after depositing the Ni cocatalyst, generating hydrogen gas of ∼88.3 μmol·g^-1·h^-1 under ultrasonic vibration (110 W and 40 kHz), which is comparable to that of Pt-loaded GaN NWs. Moreover, Ni/GaN NWs with smaller diameters (∼100 nm) demonstrated superior piezocatalytic efficiency, which can be attributed to the large piezoelectric potential evidenced by both finite-element analysis and piezoresponse force microscopy measurements. These results demonstrate the promising application potential of non-noble metal loaded GaN nanostructures in hydrogen generation driven by weak mechanical energy from the surrounding environment.

Atomic Sandwiched p-n Homojunctions

Semiconductor p-n junctions have been explored and applied in photoelectrochemical (PEC) water splitting, but serious carrier recombination and sluggish oxygen evolution reaction (OER) dynamics have demanded further progress in p-n junction photoelectrode design. Here, via a controllable NH₃ treatment, we construct sandwiched p-n homojunctions in three-unit-cells n-type SnS₂ (n-SnS₂ ) nanosheet arrays using nitrogen (N) as acceptor dopants. The optimal N-doped n-SnS₂ (pnp-SnS₂ ) with such unique structure achieves a record photocurrent density of 3.28 mA cm^-2 , which is 21 times as high as that of n-SnS₂ and the highest value among all the SnS₂ photoanodes reported so far. Moreover, the stoichiometric O₂ and H₂ evolution from water was achieved with Faradaic efficiencies close to 100 %. The superior performance could be attributed to the facilitated electron-hole separation/transfer, accelerated surface OER kinetics, prolonged carrier lifetime, and improved structural stability.

Single-atom nickel terminating sp2 and sp3 nitride in polymeric carbon nitride for visible-light photocatalytic overall water splitting

Polymeric carbon nitride (PCN) has been widely used as a metal-free photocatalyst for solar hydrogen generation from water. However, rapid charge carrier recombination and sluggish water catalysis kinetics have greatly limited its photocatalytic performance for overall water splitting. Herein, a single-atom Ni terminating agent was introduced to coordinate with the heptazine units of PCN to create new hybrid orbitals. Both theoretical calculation and experimental evidence revealed that the new hybrid orbitals synergistically broadened visible light absorption via a metal-to-ligand charge transfer (MLCT) process, and accelerated the separation and transfer of photoexcited electrons and holes. The obtained single-atom Ni terminated PCN (PCNNi), without an additional cocatalyst loading, realized efficient photocatalytic overall water splitting into easily-separated gas-product H₂ and liquid-product H₂O₂ under visible light, with evolution rates reaching 26.6 and 24.0 μmol g⁻¹ h⁻¹, respectively. It was indicated that single-atom Ni and the neighboring C atom served as water oxidation and reduction active sites, respectively, for overall water splitting via a two-electron reaction pathway.

Single-atom Ni terminating agent is introduced to coordinate with sp² or sp³ N atoms in the heptazine units of PCN, realizing visible-light photocatalytic overall water splitting to H₂O₂ and H₂ without additional cocatalyst.

Surface engraving engineering of polyhedral photocatalysts

Surface engraving engineering of polyhedral photocatalysts is overviewed based on synthetic strategies and engraved surface-related photocatalytic mechanisms. Some challenges and perspectives are also proposed.

Highly Efficient Photoelectrochemical Water Splitting Using GaN-Nanowire Photoanode with Tungsten Sulfides

In the present study, we have achieved high-performance photoelectrochemical water splitting (PEC-WS) using GaN nanowires (NWs) coated with tungsten sulfide (W_xS_1-x) (GaN-NW-W_xS_1-x) as a photoanode. The measured current density and applied-bias photon-to-current efficiency were 20.38 mA/cm² and 13.76%, respectively. These values were much higher than those reported previously for photoanodes with any kind of III-nitride nanostructure. The amount of hydrogen gas formed was 1.01 mmol/cm² from 7 h PEC-WS, which was also much higher than the previously reported values. The drastic improvement in the PEC-WS performance using the GaN-NW-W_xS_1-x photoanode was attributed to an increase in the number of photogenerated carriers due to the highly crystalline GaN NWs, and acceleration of separation of photogenerated carriers and consequent suppression of charge recombination because of nitrogen-terminated surfaces of NWs, sulfur vacancies in W_xS_1-x, and type-II band alignment between NW and W_xS_1-x. The degree of impedance matching, evaluated from Nyquist plots, was considered to analyze charge transfer characteristics at the interface between the GaN-NW-W_xS_1-x photoanode and 0.5-M H₂SO₄ electrolyte. Considering the material system and scheme for the PEC-WS, our approach provides an efficient way to improve hydrogen evolution reaction.

Metal-Organic-Framework-Based Photocatalysts Optimized by Spatially Separated Cocatalysts for Overall Water Splitting

Efficient charge separation and utilization are critical factors in photocatalysis. Herein, it is demonstrated that the complete spatial separation of oxidation and reduction cocatalysts enhances the efficacy of charge separation and surface reaction. Specifically, a Pt@NH₂ -UiO-66@MnO_x (PUM) heterostructured photocatalyst with Pt and MnO_x as cocatalysts is designed for the optimization of the NH₂ -UiO-66 photocatalyst. Compared with the pristine NH₂ -UiO-66, Pt@NH₂ -UiO-66 (PU), and NH₂ -UiO-66@MnO_x (UM) samples, the PUM sample exhibits the highest hydrogen production activity. As cocatalysts, Pt favors trapping of electrons, while MnO_x tends to collect holes. Upon generation from NH₂ -UiO-66, electrons and holes flow inward and outward of the metal-organic framework photocatalyst, accumulating on the corresponding cocatalysts, and then take part in the redox reactions. The PUM photocatalyst greatly prolongs the lifetime of the photogenerated electrons and holes, which favors the electron-hole separation. Furthermore, the PUM sample facilitates overall water splitting in the absence of sacrificial agents, thereby demonstrating its potential as a modification method of MOF-type semiconductors for the overall water-splitting reaction.

Activity and selectivity of CO2 photoreduction on catalytic materials

Photoreduction of molecular CO₂ by solar light into added-value fuels or chemical feedstocks is an appealing strategy to simultaneously overcome environmental problems and energy challenges. However, multiple reaction steps and a large number of possible products have significantly hindered the development of highly selective catalysts capable of delivering CO₂ conversion with high efficiency. Recently, several strategies associated with different conversion mechanisms have been proposed to improve the activity and product selectivity of CO₂ photocatalysts. These are based on development of low dimensional nanomaterials, defect or facet engineering, design of tailored heterostructures, and carrier conductivity enhancement. In spite of impressive progress in the field, real-world applications are yet to be delivered. To sustain further research in this promising field, here we provide a short frontier of recent advances in activity and selectivity of CO₂ reduction photocatalysts, together with a critical discussion of further avenues of research in this field.

Decoupling Strategy for Enhanced Syngas Generation from Photoelectrochemical CO2 Reduction

Photoelectrochemical CO₂ reduction into syngas (a mixture of CO and H₂) provides a promising route to mitigate greenhouse gas emissions and store intermittent solar energy into value-added chemicals. Design of photoelectrode with high energy conversion efficiency and controllable syngas composition is of central importance but remains challenging. Herein, we report a decoupling strategy using dual cocatalysts to tackle the challenge based on joint computational and experimental investigations. Density functional theory calculations indicate the optimization of syngas generation using a combination of fundamentally distinctive catalytic sites. Experimentally, by integrating spatially separated dual cocatalysts of a CO-generating catalyst and a H₂-generating catalyst with GaN nanowires on planar Si photocathode, we report a record high applied bias photon-to-current efficiency of 1.88% and controllable syngas products with tunable CO/H₂ ratios (0–10) under one-sun illumination. Moreover, unassisted solar CO₂ reduction with a solar-to-syngas efficiency of 0.63% is demonstrated in a tandem photoelectrochemical cell.

•

Combined experimental and theoretical investigations were performed

•

A record high applied bias photon-to-current efficiency of 1.88% was achieved

•

The CO/H₂ ratio in the syngas product can be controllably tuned in a wide range

•

Unassisted syngas generation was proved in a tandem photoelectrochemical cell

Dominant Polar Surfaces of Colloidal II-VI Wurtzite Semiconductor Nanocrystals Enabled by Cation Exchange

Polar surfaces of ionic crystals are of growing technological importance, with implications for the efficiency of photocatalysts, gas sensors, and electronic devices. The creation of ionic nanocrystals with high percentages of polar surfaces is an option for improving their efficiency in the aforementioned applications but is hard to accomplish because they are less thermodynamically stable and prone to vanish during the growth process. Herein, we develop a strategy that is capable of producing polar surface-dominated II-VI semiconductor nanocrystals, including ZnS and CdS, from copper sulfide hexagonal nanoplates through cation exchange reactions. The obtained wurtzite ZnS hexagonal nanoplates have dominant {002} polar surfaces, occupying up to 97.8% of all surfaces. Density functional theory calculations reveal the polar surfaces can be stabilized by a charge transfer of 0.25 eV/formula from the anion-terminated surface to the cation-terminated surface, which also explains the presence of polar surfaces in the initial Cu_1.75S hexagonal nanoplates with cation deficiency prior to cation exchange reactions. Experimental results showed that the HER activity could be boosted by the surface polarization of polar surface-dominated ZnS hexagonal nanoplates. We anticipate this strategy is general and could be used with other systems to prepare nanocrystals with dominant polar surfaces. Furthermore, the availability of colloidal semiconductor nanocrystals with dominant polar surfaces produced through this strategy opens a new avenue for improving their efficiency in catalysis, photocatalysis, gas sensing, and other applications.