Molecular Porous Photosystems Tailored for Long‐Term Photocatalytic CO 2 Reduction

GFP Chromophore Integrated Conjugated Microporous Polymers toward Bioinspired Photocatalytic CO2 Reduction to CO

The development of highly active, durable, and low-cost metal-free catalysts for the photocatalytic CO2 reduction reaction (CO2RR) is an efficient and environmentally friendly solution to address significant problems like global warming and high energy demand. In the present study, we have demonstrated the design and synthesis of a donor-acceptor based conjugated microporous polymer (CMP), TPA-GFP, by integrating an electron donor, tris(4-ethynylphenyl)amine (TPA), with a green fluorescent protein chromophore analogue (Z)-4-(2-hydroxy-3,5-diiodobenzylidene)-1-(4-iodophenyl)-2-methyl-1H-imidazol-5(4H)-one (o-HBDI-I3) (GFP). In comparison to nondonor 1,3,5-triethynylbenzene (TEB) based TEB-GFP CMP, photocatalytic CO2 reduction using donor-acceptor based TPA-GFP CMP displays a 3-fold increment of CO production yield with a maximum CO yield of 1666 μmol g-1 at 12 h. Further, the CO selectivity increases significantly from a mere 54% in TEB-GFP to an impressive 95% in TPA-GFP. The impressive CO2 reduction efficiency and selectivity for TPA-GFP can be attributed to the efficient light-harvesting capability and facile charge separation and migration through donor-acceptor building units of the CMP. The mechanistic aspect of the photocatalytic CO2 reduction process is explored using in situ DRIFTS and DFT calculation, and a plausible photocatalytic mechanism is proposed.

An Ester-Functionalized Bidentate Titanium-based Metal-Organic Framework with Visible-Light Enhanced Activity for CO2 Photoreduction

The limited visible light response is a critical drawback that hampers the photocatalytic efficacy of Ti-MOFs. However, study concerning the enhancement of the visible-light response of Ti-MOFs is still in its nascent stage. In this study, we employ the 'dual-ligand decrystallization strategy' to manipulate the electronic environment of Ti4+, leading to the synthesis of three ester-functionalized bidentate Ti-MOFs with enhanced visible light response. Our findings reveal that this approach not only reduces the bandgap of Ti-MOFs but also enhances their photocatalytic activity for carbon dioxide reduction. Specifically, compared to the bandgap of Ti-BPDC at 2.98 eV, the bandgap of Ti-BPDC-CA 1 : 2 has been reduced to 2.14 eV. Moreover, Ti-BPDC-CA 1 : 2 exhibits extraordinary photocatalytic activity with the formic acid (HCOOH) production rate of 617 μmol g-1 h-1 with over 99.5 % selectivity, which is 3.47 times higher than that of Ti-BPDC. Besides providing a cost-effective strategy for enhancing the visible light response of Ti-MOFs, our study also serves as an illustrative example for establishing the correlation between electronic structure and optical properties.

Unveiling the exciton dissociation dynamics steered by built-in electric fields in conjugated microporous polymers for photoreduction of uranium (VI) from seawater

Developing highly efficient photocatalysts based on conjugated microporous polymers (CMPs) are often impeded by the intrinsically large exciton binding energy and sluggish charge transfer kinetics that result from their vulnerable driving force. Herein, a family of pyrene-based nitrogen-implanted CMPs were constructed, where the nitrogen gradient was regulated. Accordingly, the built-in electric field endowed by the nitrogen gradient dramatically accelerates the dissociation of exciton into free carriers, thereby enhancing charge separation efficiency. As a result, PyCMP-3N generated by polymerization of 1,3,6,8-tetrakis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyrene and 2,4,6-tris(4-bromophenyl)-1,3,5-triazine featured an optimized built-in electric field and exhibited the highest photocatalytic removal efficiency of uranium (VI) (99.5 %). Our proposed strategy not only provides inspiration for constructing the built-in electric field by controlling nitrogen concentration gradients, but also offers an in-depth understanding the crucial role of built-in electric field in exciton dissociation and charge transfer, efficiently promoting CMPs photocatalysis.

Suppression of Dexter transfer by covalent encapsulation for efficient matrix-free narrowband deep blue hyperfluorescent OLEDs

Hyperfluorescence shows great promise for the next generation of commercially feasible blue organic light-emitting diodes, for which eliminating the Dexter transfer to terminal emitter triplet states is key to efficiency and stability. Current devices rely on high-gap matrices to prevent Dexter transfer, which unfortunately leads to overly complex devices from a fabrication standpoint. Here we introduce a molecular design where ultranarrowband blue emitters are covalently encapsulated by insulating alkylene straps. Organic light-emitting diodes with simple emissive layers consisting of pristine thermally activated delayed fluorescence hosts doped with encapsulated terminal emitters exhibit negligible external quantum efficiency drops compared with non-doped devices, enabling a maximum external quantum efficiency of 21.5%. To explain the high efficiency in the absence of high-gap matrices, we turn to transient absorption spectroscopy. It is directly observed that Dexter transfer from a pristine thermally activated delayed fluorescence sensitizer host can be substantially reduced by an encapsulated terminal emitter, opening the door to highly efficient 'matrix-free' blue hyperfluorescence.

Schottky Junction and D-A1 -A2 System Dual Regulation of Covalent Triazine Frameworks for Highly Efficient CO2 Photoreduction

Covalent triazine frameworks (CTFs) are emerging as a promising molecular platform for photocatalysis. Nevertheless, the construction of highly effective charge transfer pathways in CTFs for oriented delivery of photoexcited electrons to enhance photocatalytic performance remains highly challenging. Herein, a molecular engineering strategy is presented to achieve highly efficient charge separation and transport in both the lateral and vertical directions for solar-to-formate conversion. Specifically, a large π-delocalized and π-stacked Schottky junction (Ru-Th-CTF/RGO) that synergistically knits a rebuilt extended π-delocalized network of the D-A1 -A2 system (multiple donor or acceptor units, Ru-Th-CTF) with reduced graphene oxide (RGO) is developed. It is verified that the single-site Ru units in Ru-Th-CTF/RGO act as effective secondary electron acceptors in the lateral direction for multistage charge separation/transport. Simultaneously, the π-stacked and covalently bonded graphene is regarded as a hole extraction layer, accelerating the separation/transport of the photogenerated charges in the vertical direction over the Ru-Th-CTF/RGO Schottky junction with full use of photogenerated electrons for the reduction reaction. Thus, the obtained photocatalyst has an excellent CO2 -to-formate conversion rate (≈11050 µmol g-1 h-1 ) and selectivity (≈99%), producing a state-of-the-art catalyst for the heterogeneous conversion of CO2 to formate without an extra photosensitizer.

Isoreticular Metal-Organic Frameworks Confined Mononuclear Ru-Hydrides Enable Highly Efficient Shape-Selective Hydrogenolysis of Polyolefins

Upcycling nonbiodegradable plastics such as polyolefins is paramount due to their ever-increasing demand and landfills after usage. Catalytic hydrogenolysis is highly appealing to convert polyolefins into targeted value-added products under mild reaction conditions compared with other methods, such as high-temperature incineration and pyrolysis. We have developed three isoreticular zirconium UiO-metal-organic frameworks (UiO-MOFs) node-supported ruthenium dihydrides (UiO-RuH2), which are efficient heterogeneous catalysts for hydrogenolysis of polyethylene at 200 °C, affording liquid hydrocarbons with a narrow distribution and excellent selectivity via shape-selective catalysis. UiO-66-RuH2 catalyzed hydrogenolysis of single-use low-density polyethylene (LDPE) produced a C12 centered narrow bell-shaped distribution of C8-C16 alkanes in >80% yield and 90% selectivity in the liquid phase. By tuning the pore sizes of the isoreticular UiO-RuH2 MOF catalysts, the distribution of the products could be systematically altered, affording different fuel-grade liquid hydrocarbons from LDPE in high yields. Our spectroscopic and theoretical studies and control experiments reveal that UiO-RuH2 catalysts enable highly efficient upcycling of plastic wastes under mild conditions owing to their unique combination of coordinatively unsaturated single-site Ru-active sites, uniform and tunable pores, well-defined porous structure, and superior stability. The kinetics and theoretical calculations also identify the C-C bond scission involving β-alkyl transfer as the turnover-limiting step.

Unravelling the Molecular Structure and Confining Environment of an Organometallic Catalyst Heterogenized within Amorphous Porous Polymers

The catalytic activity of multifunctional, microporous materials is directly linked to the spatial arrangement of their structural building blocks. Despite great achievements in the design and incorporation of isolated catalytically active metal complexes within such materials, a detailed understanding of their atomic-level structure and the local environment of the active species remains a fundamental challenge, especially when these latter are hosted in non-crystalline organic polymers. Here, we show that by combining computational chemistry with pair distribution function analysis, 129 Xe NMR, and Dynamic Nuclear Polarization enhanced NMR spectroscopy, a very accurate description of the molecular structure and confining surroundings of a catalytically active Rh-based organometallic complex incorporated inside the cavity of amorphous bipyridine-based porous polymers is obtained. Small, but significant, differences in the structural properties of the polymers are highlighted depending on their backbone motifs.

Tunable Photocatalytic Selectivity by Altering the Active Center Microenvironment of an Organic Polymer Photocatalyst

The favored production of one product over another is a major challenge in synthetic chemistry, reducing the formation of byproducts and enhancing atom efficacy. The formation of catalytic species that have differing reactivities based on the substrate being converted, has been targeted to selectively control reactions. Here, we report the production of photocatalytic self-assembled amphiphilic polymers, with either hydrophilic or hydrophobic microenvironments at the reactive center. Benzothiadiazole-based photocatalysts were polymerized into either the hydrophilic or the hydrophobic compartment of a diblock copolymer by RAFT polymerization. The difference in the reactivity of each microenvironment was dictated by the physical properties of the substrate. Stark differences in reactivity were observed for polar substrates, where a hydrophilic microenvironment was favored. Conversely, both microenvironments performed similarly for very hydrophobic substrates, showing that reagent partitioning is not the only factor that drives photocatalytic conversion. Furthermore, the use of secondary swelling solvents allowed an additional reagent exchange between the continuous phase and the heterogeneous photocatalyst, resulting in a significant 5-fold increase in conversion for a radical carbon-carbon coupling.

Supramolecular multi-electron redox photosensitisers comprising a ring-shaped Re(i) tetranuclear complex and a polyoxometalate

Redox photosensitisers (PSs) play essential roles in various photocatalytic reactions. Herein, we synthesised new redox PSs of 1 : 1 supramolecules that comprise a ring-shaped Re(i) tetranuclear complex with 4+ charges and a Keggin-type heteropolyoxometalate with 4- charges. These PSs photochemically accumulate multi-electrons in one molecule (three or four electrons) in the presence of an electron donor and can supply electrons with different reduction potentials. PSs were successfully applied in the photocatalytic reduction of CO2 using catalysts (Ru(ii) and Re(i) complexes) and triethanolamine as a reductant. In photocatalytic reactions, these supramolecular PSs supply a different number of electrons to the catalyst depending on the redox potential of the intermediate, which is made from the one-electron-reduced species of the catalyst and CO2. Based on these data, information on the reduction potentials of the intermediates was obtained.

Core-Shell Covalently Linked Graphitic Carbon Nitride-Melamine-Resorcinol-Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO2 Reduction to Methanol

Photocatalytic reduction of CO₂ with light and H₂O to form CH₃OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmentally unfriendly toxic metals limit their applicability. Here, we report metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C₃N₄, CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Covalent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt % CN, a CH₃OH yield of 0.99 μmol·h^-1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with X-ray photoelectron spectroscopy, transmission electron microscopy, and bulk and surface elemental analyses supported the formation of a core-shell structure and the charge transfer in the C-N bond at the CN-MRF interface between the methoxy group in the 2,4-dihydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of the photo-excited internal charge transferred from CN to the hydroxymethylamino group in MRF, whose amino group was the catalytic site for the CO₂ photocatalytic reduction to CH₃OH. This study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response.

Visible-Light-Driven Photocatalytic CO2 Reduction to CO/CH4 Using a Metal-Organic "Soft" Coordination Polymer Gel

The self-assembly of a well-defined and astutely designed, low-molecular weight gelator (LMWG) based linker with a suitable metal ion is a promising method for preparing photocatalytically active coordination polymer gels. Here, we report the design, synthesis, and gelation behaviour of a tetrapodal LMWG based on a porphyrin core connected to four terpyridine units (TPY-POR) through amide linkages. The self-assembly of TPY-POR LMWG with Ru^II ions results in a Ru-TPY-POR coordination polymer gel (CPG), with a nanoscroll morphology. Ru-TPY-POR CPG exhibits efficient CO₂ photoreduction to CO (3.5 mmol g^-1  h^-1 ) with >99 % selectivity in the presence of triethylamine (TEA) as a sacrificial electron donor. Interestingly, in the presence of 1-benzyl-1,4-dihydronicotinamide (BNAH) with TEA as the sacrificial electron donor, the 8e^- /8H⁺ photoreduction of CO₂ to CH₄ is realized with >95 % selectivity (6.7 mmol g^-1  h^-1 ). In CPG, porphyrin acts as a photosensitizer and covalently attached [Ru(TPY)₂ ]²⁺ acts as a catalytic center as demonstrated by femtosecond transient absorption (TA) spectroscopy. Further, combining information from the in situ DRIFT spectroscopy and DFT calculation, a possible reaction mechanism for CO₂ reduction to CO and CH₄ was outlined.

Finding the Sweet Spot of Photocatalysis─A Case Study Using Bipyridine-Based CTFs

Covalent triazine frameworks (CTFs) are a class of porous organic polymers that continuously attract growing interest because of their outstanding chemical and physical properties. However, the control of extended porous organic framework structures at the molecular scale for a precise adjustment of their properties has hardly been achieved so far. Here, we present a series of bipyridine-based CTFs synthesized through polycondensation, in which the sequence of specific building blocks is well controlled. The reported synthetic strategy allows us to tailor the physicochemical features of the CTF materials, including the nitrogen content, the apparent specific surface area, and optoelectronic properties. Based on a comprehensive analytical investigation, we demonstrate a direct correlation of the CTF bipyridine content with the material features such as the specific surface area, band gap, charge separation, and surface wettability with water. The entirety of these parameters dictates the catalytic activity as demonstrated for the photocatalytic hydrogen evolution reaction (HER). The material with the optimal balance between optoelectronic properties and highest hydrophilicity enables HER production rates of up to 7.2 mmol/(h·g) under visible light irradiation and in the presence of a platinum cocatalyst.

Acetylene/Vinylene-Bridged π-Conjugated Covalent Triazine Polymers for Photocatalytic Aerobic Oxidation Reactions under Visible Light Irradiation

Solar-driven photocatalytic chemical transformation provides a sustainable strategy to produce valuable feedstock, but designing photocatalysts with high efficiency remains challenging. Herein, two acetylene- or vinylene-bridged π-conjugated covalent triazine polymers, A-CTP-DPA and V-CTP-DPE, were successfully fabricated toward metal-free photocatalytic oxidation under visible light irradiation. Compared to the one without acetylene or vinylene bridge, both resulting polymers exhibited superior activity in photocatalytic selective oxidation of sulfides and oxidative coupling of amines; in particular, A-CTP-DPA delivered an optimal photocatalytic performance. The superior activity was attributed to the broadened spectral response range, effective separation, rapid transportation of photogenerated charge carriers, and abundant active sites for photogenerated electrons due to the existence of the acetylene bridge in the framework. This work highlights the potential of acetylene and vinylene bridges in tuning catalytic efficiency of organic semiconductors, providing a guideline for the design of efficient photocatalysts.

Photocatalytic Aqueous CO2 Reduction to CO and CH4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO₂ reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO₂ photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH₄ comparable to those obtained with a precious metal-based [Ru(phen)₃](PF₆)₂ sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. The present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

Metal center regulation of the porphyrin unit in covalent organic polymers for boosting the photocatalytic CO2 reduction activity

Regulating the porphyrin's metal center of metalloporphyrin(MPor)/Ru(ii)-pincer complex(RuN3) covalent organic polymers (COPs) effectively boosted the CO2 photoreduction by promoting charge separation and sacrificial electron donor oxidation.

N-Formylation of amines utilizing CO2 by a heterogeneous metal–organic framework supported single-site cobalt catalyst

Single-site cobalt-hydride supported on oxo-nodes of a porous aluminium metal–organic framework is a chemoselective and reusable catalyst for N-formylation of amines using CO2.

Fast synthesis of porous iron doped CeO2 with oxygen vacancy for effective CO2 photoreduction

The activity of photocatalytic CO₂ conversion to carbon-containing products is determined by the adsorption and activation of CO₂ molecules on the surface of catalyst. Here, iron doped porous CeO₂ with oxygen vacancy (PFeCe) was prepared by one-step combustion method. The amount of CO₂ adsorbed via using the porous structure has been significantly increased in the case of a relatively small specific surface area and CO₂ molecules are more easily captured and undergo a reduction reaction with photoinduced carriers. In addition, oxygen vacancies are formed in the iron doped CeO₂ lattice as the active sites for CO₂ reduction, which can form strong interactions with CO₂ molecules, thereby effectively activating CO₂ molecules. The reduction products of CO₂ over PFeCe composite are CO and CH₄, which is approximately 9.0 and 7.7 folds than that of CeO₂. This work offers insights for the construction of efficient ceria-based photocatalysts to further achieve robust solar CO₂ conversion.

Molecular Cage-Mediated Radial Gradient Porous Sponge Nanofiber for Selective Adsorption of a Mustard Gas Simulant

Poisons and poisonous weapons in armed conflict, especially chemical warfare agents (CWAs), pose serious threats to global security. Porous materials have recently been regarded as promising candidates to defend personnel in a CWA-contaminated environment, but challenges remain for integrating these materials into protective garments without sacrificing the intrinsic flexibility of fibers. Here, we report a rigid-flexible coupling hypercross-linking methodology to create flexible sponge-like nanofibers featuring hierarchical radial gradient porous nanoarchitectures, in which the inner structure is a mesoporous multichambered network, and the outer structure is a dense domain with a microporous network structure. Experimental and computational evidence supports the contention that sponge nanofibers with distinctive pore topology and robust bendability can be designed by manipulating the flexibility of building blocks. The resulting heterogeneous nanofibers exhibit integrated properties of spatially selective superstructures, abundant micropores, interconnected mesopores, a high surface area (579 m² g^-1), remarkable flexibility, and exceptional CWA affinity, which are extraordinarily effective for adsorptive performance (498 mg g^-1). The successful synthesis of these materials might inspire the development of chemical protective materials in an efficient, self-standing, and structurally adaptive form.

Metal-Free Catalysis: A Redox-Active Donor-Acceptor Conjugated Microporous Polymer for Selective Visible-Light-Driven CO2 Reduction to CH4

Achieving more than a two-electron photochemical CO₂ reduction process using a metal-free system is quite exciting and challenging, as it needs proper channeling of electrons. In the present study, we report the rational design and synthesis of a redox-active conjugated microporous polymer (CMP), TPA-PQ, by assimilating an electron donor, tris(4-ethynylphenyl)amine (TPA), with an acceptor, phenanthraquinone (PQ). The TPA-PQ shows intramolecular charge-transfer (ICT)-assisted catalytic activity for visible-light-driven photoreduction of CO₂ to CH₄ (yield = 32.2 mmol g^-1) with an impressive rate (2.15 mmol h^-1 g^-1) and high selectivity (>97%). Mechanistic analysis based on experimental results, in situ DRIFTS, and computational studies reveals that the potential of TPA-PQ for catalyzing photoreduction of CO₂ to CH₄ was energetically driven by photoactivated ICT upon surface adsorption of CO₂, wherein adjacent keto groups of PQ unit play a pivotal role. The critical role of ICT for stimulating photocatalysis is further illustrated by synthesizing another redox-active CMP (TEB-PQ), bearing triethynylbenzene (TEB) and PQ, that shows 8-fold lesser activity for photoreduction toward CO₂ to CH₄ (yield = 4.4 mmol g^-1) as compared to TPA-PQ. The results demonstrate a novel concept for CO₂ photoreduction to CH₄ using an efficient, sustainable, and recyclable metal-free robust organic photocatalyst.

Porous Organic Polymers for Catalytic Conversion of Carbon Dioxide

To overcome the challenges of global warming and environmental pollution, it is necessary to reduce the concentration of carbon dioxide (CO₂ ) in the atmosphere, which is mainly accumulated in the air through the burning of fossil fuels. Therefore, the development of environmentally friendly strategies to capture carbon dioxide and convert it into value-added products offers a promising way forward for reducing carbon dioxide concentration in the atmosphere. In this context, POPs (porous organic polymers) have shown great potential as CO₂ selective adsorbents due to their high specific surface area, chemical stability, nanoscale porosity and structural diversity, as well as POPs based heterogeneous catalysts for CO₂ conversion. This review provides a concise account of preparation methods of various POPs, challenges and current development trends of POPs in photocatalytic CO₂ reduction, electrocatalytic CO₂ reduction and chemical CO₂ conversion.

A Superficial Intramolecular Alignment of Carbon Nitride through Conjugated Monomer for Optimized Photocatalytic CO2 Reduction

One of the most frequent ways to widen the adsorption range of carbon nitride (CN) is to add a well-known photosensitizer into its basic structure. So far, such attachments have been accomplished by using weak van der Waals forces. However, using strong covalent bonding to attach such photosensitizer with CN is yet to be determined. Here, for the first time, we covalently bonded porphyrin (5,10,15,20-tetrakis(4-(2,4-diamino-1,3,5-triazinyl) phenyl)-Porphyrin (TDP)), a renowned photosensitizer, effectively with CN by thermally balanced molecular strategy. A photoreaction system was set up for the deoxygenated conversion of CO2 to CO under visible light, where cobalt acted as a redox controller to speed up the charge transportation, while CN-TDP worked as a CO2 activating photocatalyst. The subsequent photocatalyst has a broader absorbance range, a greater specific surface area, and intramolecular organic connections that help to decrease the electron-hole pairs’ recombination rate. Furthermore, the average weight ratio between urea and TDP was well-tuned, resulting in a fantastic CO2 photoconversion for CN-TDP7.0 compared to the blank sample. This substantial increase in photocatalytic activity predicts a significant shift in CN’s specific surface area, band gap, chemical composition, and structure, as well as the efficient separation of photogenerated charge carriers from the ground state (HOMO) to the excited state (LUMO), making it a top candidate for CO2 photoreduction. At the same time, this approach paves the path for the bottom-up fabrication of carbon nitride nanosheets.

Regulating Utilization Efficiency of the Photogenerated Charge Carriers by Constructing Donor-π-Acceptor Polymers for Upgrading Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction offers a promising approach for managing global carbon balance. The smooth delivery of the photoexcited electrons to the active sites without the extra photosensitizers is still challenging. Herein, a series of donor-π-acceptor conjugated organic polymers (COPs) were produced using anthracene, cobalt-coordinated bipyridyl, and benzene as donor, acceptor, and π linker units, respectively. The introduction of phenyl linker significantly improved the activities of photocatalytic CO₂ reduction upon visible light illumination. Structure-performance relationship examinations uncovered that donor-π-acceptor structure promotes mobility of charge carriers and utilization efficiency on the catalytically active sites, resulting in high photocatalytic activity and durability for CO₂ photoreduction. The in-depth insights into the electron transport processes open new perspectives for further optimization and rational design of photoactive polymers with high efficiency for solar-energy conversion.

Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols

Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H₂. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl₂ followed by the reaction of NaEt₃BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of Co^II and Al^III centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H₂ allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.

Coupling Strategy for CO2 Valorization Integrated with Organic Synthesis by Heterogeneous Photocatalysis

Photocatalytic reduction of CO₂ to solar fuels and/or fine chemicals is a promising way to increase the energy supply and reduce greenhouse gas emissions. However, the conventional reaction system for CO₂ photoreduction with pure H₂ O or sacrificial agents usually suffers from low catalytic efficiency, poor stability, or cost-ineffective atom economy. A recent surge of developments, in which photocatalytic CO₂ valorization is integrated with selective organic synthesis into one reaction system, indicates an efficient modus operandi that enables sufficient utilization of photogenerated electrons and holes to achieve the goals for sustainable economic and social development. In this Review we discuss current advances in cooperative photoredox reaction systems that integrate CO₂ valorization with organics upgrading based on heterogeneous photocatalysis. The applications and virtues of this strategy and the underlying reaction mechanisms are discussed. The ongoing challenges and prospects in this area are critically discussed.

Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base-Metal Catalysis

We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.

Hypercrosslinked Polymers as a Photocatalytic Platform for Visible-Light-Driven CO2 Photoreduction Using H2 O

The design of robust, high-performance photocatalysts is key for the success of solar fuel production by CO2 conversion. In this study, hypercrosslinked polymer (HCP) photocatalysts have been developed for the selective reduction of CO2 to CO, combining excellent CO2 sorption capacities, good general stabilities, and low production costs. HCPs are active photocatalysts in the visible light range, significantly outperforming the benchmark material, TiO2 P25, using only sacrificial H2 O. It is hypothesized that superior H2 O adsorption capacities facilitate access to photoactive sites, improving photocatalytic conversion rates when compared to sacrificial H2 . These polymers are an intriguing set of organic photocatalysts, displaying no long-range order or extended π-conjugation. The as-synthesized networks are the sole photocatalytic component, requiring no added cocatalyst doping or photosensitizer, representing a highly versatile and exciting platform for solar-energy conversion.

Critical Aspects of Metal-Organic Framework-Based Materials for Solar-Driven CO2 Reduction into Valuable Fuels

Photoreduction of CO2 into value-added fuels is one of the most promising strategies for tackling the energy crisis and mitigating the "greenhouse effect." Recently, metal-organic frameworks (MOFs) have been widely investigated in the field of CO2 photoreduction owing to their high CO2 uptake and adjustable functional groups. The fundamental factors and state-of-the-art advancements in MOFs for photocatalytic CO2 reduction are summarized from the critical perspectives of light absorption, carrier dynamics, adsorption/activation, and reaction on the surface of photocatalysts, which are the three main critical aspects for CO2 photoreduction and determine the overall photocatalytic efficiency. In view of the merits of porous materials, recent progress of three other types of porous materials are also briefly summarized, namely zeolite-based, covalent-organic frameworks based (COFs-based), and porous semiconductor or organic polymer based photocatalysts. The remarkable performance of these porous materials for solar-driven CO2 reduction systems is highlighted. Finally, challenges and opportunities of porous materials for photocatalytic CO2 reduction are presented, aiming to provide a new viewpoint for improving the overall photocatalytic CO2 reduction efficiency with porous materials.

Promoting charge separation in donor–acceptor conjugated microporous polymers via cyanation for the photocatalytic reductive dehalogenation of chlorides

Conjugated microporous polymers (CMPs) have emerged as promising heterogeneous photocatalysts for organic transformations owing to their structural designability and functional versatility.

Plasma-induced black bismuth tungstate as a photon harvester for photocatalytic carbon dioxide conversion

The Bi QDs are reduced in situ on the surface of black Bi₂WO₆ nanosheets using a novel plasma treatment, which shows a superior CO₂ conversion performance.