A Water‐Stable Ionic MOF for the Selective Capture of Toxic Oxoanions of Se VI and As V and Crystallographic Insight into the Ion‐Exchange Mechanism

Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2. This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

Record High Iodate Anion Capture by a Redox-Active Cationic Polymer Network

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3 -) through ion exchange or hard acid-hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox-active cationic polymer network (SCU-CPN-6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion-exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU-CPN-6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3 -. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU-CPN-6 shows excellent uptake selectivity for IO3 - in the presence of high concentrations of SO4 2-, Cl-, and NO3 -. Meanwhile, a high distribution coefficient indicates its exemplary deep-removal performance for low IO3 - concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3 - but also establishes a promising avenue for the design of advanced adsorbents for diverse applications.

Integrated Solution for As(III) Contamination in Water Based on Crystalline Porous Organic Salts

A stable crystalline organic porous salt (CPOSs-NXU-1) with 1D apertures has been assembled by the solvothermal method, which shows high-sensitivity "turn-on" fluorescence detection and large-capacity adsorption of As(III) ions in water. The detection limits, saturated adsorption capacity, and removal rate of CPOSs-NXU-1 for As(III) ions in an aqueous solution can reach 74.34 nm (5.57 ppb), 451.01 mg g-1, and 99.6%, respectively, at pH = 7 and room temperature. With the aid of XPS, IR, Raman, and DFT theoretical calculations, it is determined that CPOSs-NXU-1 adsorbed As(III) ions in the form of H2AsO3 - and H3AsO3 through hydrogen bonding between the host and guest. The mechanism for fluorescence sensitization of As(III) ions to CPOSs-NXU-1 is mainly to increase the energy level difference between the ground state and excited state investigated by UV-vis absorption spectra, UV-vis diffuse reflectance spectra, and theoretical calculations. By constructing fluorescent CPOSs, an integrated solution has been achieved to treating As(III) contamination in the water that is equipped with detection and removal. These results blaze a promising path for addressing trivalent arsenic contamination in water efficiently, rapidly, and economically.

Fabrication of Carboxylate-Functionalized 2D MOF Nanosheet with Caged Cavity for Efficient and Selective Extraction of Uranium from Aqueous Solution

The efficient removal of radioactive uranium from aqueous solution is of great significance for the safe and sustainable development of nuclear power. An ultrathin 2D metal-organic framework (MOF) nanosheet with cavity structures was elaborately fabricated based on a calix[4]arene ligand. Incorporating the permanent cavity structures on MOF nanosheet can fully utilize its structural characteristics of largely exposed surface area and accessible adsorption sites in pollutant removal, achieving ultrafast adsorption kinetics, and the functionalized cavity structure would endow the MOF nanosheets with the ability to achieve preconcentration and extraction of uranium from aqueous solution, affording ultrahigh removal efficiency even in ultra-low concentrations. Thus, more than 97% uranium can be removed from the concentration range of 50-500 µg L-1 within 5 min. Moreover, the 2D nano-material exhibits ultra-high anti-interference ability, which can efficiently remove uranium from groundwater and seawater. The adsorption mechanism was investigated by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) analysis, and density functional theory (DFT) calculations, which revealed that the cavity structure plays an important role in uranium capture. This study not only realizes highly efficient uranium removal from aqueous solution but also opens the door to achieving ultrathin MOF nanosheets with cavity structures, which will greatly expand the applications of MOF nanosheets.

Achieving ultrafast and highly selective capture of radiotoxic tellurite ions on iron-based metal-organic frameworks through coordination bond-dominated conversion

Chemically durable and effective adsorbents for radiotoxic TeOx2- (TeIV and TeVI) anions remain in great demand for contamination remediation. Herein, a low-cost iron-based metal-organic framework (MIL-101(Fe)) was used as an adsorbent to capture TeOx2- anions from contaminated solution with ultrafast kinetics and record-high adsorption capacity of 645 mg g-1 for TeO32- and 337 mg g-1 for TeO42-, outperforming previously reported adsorbents. Extended X-ray absorption fine structure (EXAFS) and density functional theory (DFT) calculations confirmed that the capture of TeOx2- by MIL-101(Fe) was mediated by the unique C-O-Te and Fe-O-Te coordination bonds at corresponding optimal adsorption sites, which enabled the selective adsorption of TeOx2- from solution and further irreversible immobilization under the geological environment. Meanwhile, MIL-101(Fe) works steadily over a wide pH range of 4-10 and at high concentrations of competing ions, and it is stable under β-irradiation even at high dose of 200 kGy. Moreover, the MIL-101(Fe) membrane was fabricated to efficiently remove TeO32- ions from seawater for practical use, overcoming the secondary contamination and recovery problems in powder adsorption. Finally, the good sustainability of MIL-101(Fe) was evaluated from three perspectives of technology, environment, and society. Our strategy provides an alternative to traditional removal methods that should be attractive for Te contamination remediation.

Functional UiO-66 for highly selective adsorption of N-nitrosodipropylamine: adsorption performance and mechanisms

N-Nitrosodipropylamine (NDPA) is a class of nitrogenous disinfection by-products (N-DBPs) with high toxicity. Although NDPA present in water bodies is at relatively low concentrations, the potential risk is high due to its high toxicity and bioaccumulation. Metal-organic frameworks (MOFs), a new type of porous material with remarkable functionality, have shown great performance in a wide variety of applications in adsorption. This is the first study investigating the adsorption of MOFs on NDPA. Herein, UiO-66 with -NH2 and imidazolium functional groups were synthesized by modifying UiO-66 after amination. Adsorption kinetics and isotherm models were used to compare the adsorption properties of the two materials for low-concentration NDPA in water. The results showed that the behavior of all the adsorbents was consistent with the Langmuir model and the pseudo-second-order model and that the adsorption was homogeneous chemisorption. The structures of the nanoparticles were characterized by FTIR, zeta potential, XRD, SEM and BET measurements. Based on the characteristics, four adsorption mechanisms, namely electron conjugation, coordination reaction, anion-π interaction, and van der Waals forces, were simultaneously involved in the adsorption. The influencing factor experiment revealed that the adsorption of UiO-66-NH2 and (I-)Meim-UiO-66 involved hydrogen bonding and electrostatic interactions, respectively.

Bionanoengineered 2D monoelemental selenene for piezothrombolysis

Thrombosis-related diseases represent the leading causes of disability or death worldwide. However, conventional thrombolytic therapies are subjected to narrow therapeutic window, short circulation half-life and bleeding. Herein, we rationally design and develop a safe and efficient nonpharmaceutical thrombolysis strategy based on a specific piezocatalytic effect arising from platelet membrane (PM)-conjugated two-dimensional (2D) piezoelectric selenene, Se-PM nanosheets (NSs). The 2D selenene is fabricated from nonlayered bulk selenium powder by a facile liquid-phase exfoliation method, and the PM conjugation confers selenene with the distinct thrombus-homing feature. Under ultrasonic activation, the piezoelectric characteristic of selenene triggers electrons and holes separation, resulting in generation of reactive oxygen species (ROS) by reacting with surrounding H2O and O2 in the thrombosis microenvironment for thrombolysis. Both systematic in vitro and in vivo assessments demonstrate that the biocompatible Se-PM NSs efficiently degrade erythrocytes, fibrin and artificial blood clots under ultrasound irradiation. Compared to the clinical thrombolytic drug urokinase plasminogen activator, the engineered Se-PM NSs possess excellent thrombolytic efficacy by single treatment in the tail thrombosis animal model without bleeding risk. The engineered Se-PM nanoplatform marks an exciting jumping-off point for research into the application of piezocatalysis in clinical treatment of thrombosis.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Removal and recycling of aqueous selenite anions using cobalt-based metal-organic-framework coated on multi-walled carbon nanotubes composite membrane

The utilization of selenium as a novel functional material is rapidly expanding, and the retrieval of selenium from waste containing selenium is gaining recognition in the industry. This study prepared a novel composite membrane coated with the cobalt-based metal-organic framework coated on multi-walled carbon nanotubes (Co-MOF@MWCNTs). The MWCNTs served as the skeleton to support the active components of Co-MOF, which enabled efficient removal and resource utilization of liquid selenite (SeO32-). The morphology, structure, and composition of the prepared membrane were characterized using field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), etc.. Applying a permeate flux of 67.08 L m-2 h-1, the SeO32- removal efficiency of the composite membrane reached up to 92.2%. The composite membrane containing CoSeO4 can be used as an electrocatalytic oxygen evolution catalyst. Density functional theory calculations and electrochemical analysis showed that the conversion from O* to OOH* was a rate-determining step. Under 1.0 M KOH conditions, the lowest overpotential for Co-MOF@MWCNTs-40 at 10 mA cm-2 was 360 mV. In this study, the process of selenium resource utilization and the mechanism of SeO32- removal by Co-MOF@MWCNTs are revealed. It demonstrates that membrane-based sequestration of SeO32- can provide a viable approach for SeO32- removal and utilization in wastewater.

A Water-Stable Cationic SIFSIX MOF for Luminescent Probing of Cr2 O7 2- via Single-Crystal to Single-Crystal Transformation

The sensing and monitoring of toxic oxo-anion contaminants in water are of significant importance to biological and environmental systems. A rare hydro-stable SIFSIX metal-organic framework, SiF6 @MOF-1, {[Cu(L)2 (H2 O)2 ]·(SiF6 )(H2 O)}n , with exchangeable SiF6 2- anion in its pore is strategically designed and synthesized, exhibiting selective detection of toxic Cr2 O7 2- oxo-anion in an aqueous medium having high sensitivity, selectivity, and recyclability through fluorescence quenching phenomena. More importantly, the recognition and ion exchange mechanism is unveiled through the rarely explored single-crystal-to-single crystal (SC-SC) fashion with well-resolved structures. A thorough SC-SC study with interfering anions (Cl- , F- , I- , NO3 - , HCO3 - , SO4 2- , SCN- , IO3 - ) revealed no such transformations to take place, as per line with quenching studies. Density functional theory calculations revealed that despite a lesser binding affinity, Cr2 O7 2- shows strong orbital mixing and large driving forces for electron transfer than SiF6 2- , and thus enlightens the fluorescence quenching mechanism. This work inaugurates the usage of a SIFSIX MOF toward sensing application domain under aqueous medium where hydrolytic stability is a prime concern for their plausible implementation as sensor materials.

A roadmap to enhance gas permselectivity in metal-organic framework-based mixed-matrix membranes

Performing gas separation at high efficiency with minimum energy input and reduced carbon footprint is a major challenge. While several separation methods exist at various technology readiness levels, porous membrane-based separation is considered as a disruptive technology. To attain sustainability and required efficiency, different approaches of membrane design have been explored. However, the selectivity-permeation trade-off and membrane aging have restricted further advancement. In this regard, a new generation composite made of organic polymers and metal-organic framework (MOF) fillers shows substantial promise. Organic polymer matrix allows easy processibility, but it has poor permselectivity for gas molecules. Metal-organic frameworks are excellent sieving materials; however, they suffer from poor processibility issues. A combination of these two components makes an ideal sieving membrane, which can potentially outnumber the existing energy intensive distillation strategies. In this perspective, we have discussed key indices that regulate gas permselectivity by a careful selection of the existing literature. While the target gas flux and selectivity values have been a part of many previous reviews and articles, we have presented a concise discussion on the interface design of the MOF-polymer membrane, morphology, and orientation control of MOF fillers in the matrix. Following this, a future roadmap to overcome challenges related to MOF-polymer interfacial defects is outlined.

Synthesis, Structural Versatility, Magnetic Properties, and I- Adsorption in a Series of Cobalt(II) Metal-Organic Frameworks with a Charge-Neutral Aliphatic (O,O)-Donor Bridge

Four new metal-organic frameworks based on cobalt(II) salts and 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide (odabco) were obtained. Their crystallographic formulae are [Co3(odabco)2(OAc)6] (1, OAc- = acetate), [Co(H2O)2(HCOO)2]·odabco (2), [Co2(H2O)(NO3)(odabco)5](NO3)3·3.65H2O (3), and [Co2(DMF)2(odabco)4](NO3)4·3H2O (4; DMF = N,N-dimethylformamide). Crystal structures of 1-4 were determined by single-crystal X-ray crystallography. Coordination polymer 1 comprises binuclear and mononuclear metal-acetate blocks alternating within uncharged one-dimensional chains, in which odabco acts as a bridging ligand. A layered Co(II) formate 2 contains odabco only as guest molecules located in the interlayer space. Layered compound 3 and three-dimensional 4 have cationic coordination frameworks with 26% and 34% specific void volumes, respectively, unveiling high structural diversity of Co(II)-odabco MOFs based on quite a rare aliphatic moiety. Magnetization measurements were performed for 1, 3, and 4 and the obtained data were interpreted on the basis of their crystal structures. A strong (J/kB~100 K) antiferromagnetic coupling was found within binuclear metal blocks in 1. Ion exchange experiments revealed a considerable iodide uptake by 3 resulting in an up to 75% guest nitrate substitution within the voids of a coordination framework, found by capillary zone electrophoresis data and confirmed by single-crystal XRD. A preservation of 3 crystallinity during the exchange allowed for the guest I- positions within a new adduct with the formula [Co2(H2O)(NO3)(odabco)5]I2(NO3)·1.85H2O (3-I) to be successfully determined and the odabco aliphatic core to be revealed as a main adsorption center for quite large and easily polarizable iodide anions. In summary, this work presents a comprehensive study for a series of 1,4-diazabicyclo[2.2.2]octane N,N'-dioxide-based MOFs of cobalt(II) within the framework of magnetic properties and reports the first example of anion exchange in odabco-based coordination networks, supported by direct X-ray structural data. The reported results unveil promising applications of such frameworks bearing ligands with an aliphatic core in the diverse structural design of selective adsorbents and other types of functional materials.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

pH-Stable Zn(II) Coordination Polymer as a Multiresponsive Turn-On and Turn-Off Fluorescent Sensor for Aqueous Medium Detection of Al(III) and Cr(VI) Oxo-Anions

Nowadays, coordination polymers (CPs) are promising candidates as sensory materials for their high sensitivity, improved selectivity, fast responsive nature, as well as good recyclability. However, poor chemical stability often makes their practical usage limited. Herein, employing a mixed ligand approach, we constructed a chemically robust CP, {[Zn2L2(DPA)2]·3H2O}n (IITKGP-70, IITKGP stands for the Indian Institute of Technology Kharagpur), which exhibited excellent framework robustness not only in water but also over a broad range of pH solutions (pH = 3-11). The developed framework displayed high selectivity and sensitivity for the detection of trivalent Al3+ ions and toxic hexavalent Cr(VI)-oxo anions in an aqueous medium. The developed framework exhibited an aqueous medium Al3+ turn-on phenomenon with a limit of detection (LOD) value of 1.29 μM, whereas a turn-off effect was observed for toxic oxo-anions (Cr2O72- and CrO42-) having LOD values of 0.27 and 0.71 μM, respectively. Both turn-on and turn-off mechanisms are speculated via spectroscopic methods coupled with several ex situ studies. Such a multiresponsive nature (both turn-on and turn-off) for aqueous medium detection of targeted cations and anions simultaneously in a single platform coupled with high robustness, ease of scalability, recyclability, and fast-responsive nature makes IITKGP-70 highly fascinating as a sensory material for real-world applications.

Preparation of ZIF-8/PAN composite nanofiber membrane and its application in acetone gas monitoring

Znic-based metal-organic framework materials (ZIF-8) show great potential and excellent performance in the fields of sensing and catalysis. However, powdered metal-organic framework makes it easy to lose in the process of application. Herein, we use a simple blending electrostatic spinning method to combine ZIF-8 particles with polyacrylonitrile (PAN) nanofibers. ZIF-8/PAN composite nanofiber membrane. The ZIF-8/PAN nanofiber membrane is characterized by scanning electron microscope (SEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and N₂adsorption-desorption. The results show that the ZIF-8/PAN nanofiber membrane has the characteristic peaks of XRD and FTIR, which are consistent with those of simulated ZIF-8. The specific surface area of ZIF-8/PAN nanofiber membrane increases from 13.5371 to 711.4171 m²g^-1due to the introduction of ZIF-8 particles. The sensor using the nanofiber membrane as the gas sensing layer shows good response and linear correlation to different concentrations of acetone gas. The minimum detection limit of the sensor for acetone is 51.9 ppm. The blank control shows that the response of the sensor to acetone is mainly due to the introduction of ZIF-8 particles. In addition, the sensor also shows a good cyclic response to acetone.

A metal-organic framework surrounded with conjugate acid-base pairs for the efficient capture of Cr(VI) via hydrogen bonding over a wide pH range

Given the large amount of toxic Cr(VI) wastewater from various industries, it is urgent to take effective treatment measures. Adsorption has been regarded as highly desirable for Cr(VI) removal, but the effectiveness of most adsorbents is significantly dependent on pH value, in which precipitous performance drop and even structural collapse generally occur in strong acidic/alkaline aqueous. Thus, maintaining high adsorption performance and structural integrity over a wide pH range is challenging. To efficiently remove Cr(VI), we designed and prepared of an acid-base resistant metal-organic framework (MOF) Zr-BDPO, by introducing weak acid-base groups (-NH-, -N= and -OH) onto the ligand. Zr-BDPO achieved a maximum adsorption capacity of 555.6 mg·g^-1 and retained skeletal structure at pH= 1-11. Interestingly, all these groups can generate conjugate acid-base pairs by means of H⁺ and OH^- in the external solution and then form buffer layer. The removal of Cr(VI) at a broad range of pH values primarily via hydrogen bonds between -NH- and -OH, and the oxoanion species of Cr(VI) is unusual. This strategy that insulating high concentrations of acids and bases and relying on hydrogen bonds to capture Cr(VI) oxoanions provides a new perspective for actual Cr(VI) wastewater treatment.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Exceptional removal and immobilization of selenium species by bimetal-organic frameworks

Binary metallic organic frameworks can always play excellent functions for pollutants removal. One binary MOFs, UiO-66(Fe/Zr)), was newly synthesized and applied to remove aquatic selenite (SeIV) and selenate (SeVI). The adsorption behaviors and mechanisms were investigated using batch experiments, spectroscopic analyses, and theoretical calculations (DFT). The characterization results showed that the material inherited the topological structure of UiO-66 and excellent thermal stability. The large specific surface area (467.52 m²/g) and uniform mesoporous structures of the synthesized MOFs resulted in fast adsorption efficiency and high adsorption capacity for selenium species. The adsorbent kept high adsorption efficiency in a wide pH range from 2 to 11 with good anti-interference ability. The maximum adsorption capacity for Se(IV) and Se(VI) reached as high as 196 mg/g at pH 3 and 258 mg/g at pH 5, respectively. The process was conformed to fit pseudo-second-order kinetics and Langmuir isotherm, and could be explained by the formation of Fe/Zr-O-Se bond on the material surface, which was interpreted by the results of XPS, FTIR and DFT calculation. The regeneration and TCLP experiments demonstrated that UiO-66(Fe/Zr) could be regenerated for five cycles without obvious decrease of efficiencies, and the leaching rate of the adsorbed Se(IV) and Se(VI) in the spent adsorbent were only 4.8% and 2.3%. More than 99% of original Se(IV) and Se(VI) in the lake and tap water samples (1.0 mg/L of Se) could be removed in 2.0 h.

Fabrication of Protonated Two-Dimensional Metal-Organic Framework Nanosheets for Highly Efficient Iodine Capture from Water

Radioactive iodine (¹²⁹I and ¹³¹I), produced or released from nuclear-related activities, posed severe effects on both human health and environment. The efficient removal of radioiodine from aqueous medium and vapor phase is of paramount importance for the sustainable development of nuclear energy. Herein, a metal-organic framework (MOF) nanosheet with a positive charge was constructed for the capture of iodine for the first time. The as-synthesized ultrathin nanosheets, with a thickness of 4.4 ± 0.1 nm, showed a record-high iodine adsorption capacity (3704.08 mg g^-1) from aqueous solution, which is even higher than that from the vapor phase (3510.05 mg g^-1). It can be ascribed to the fully interactions between the extensive accessible active sites on the largely exposed surface of 2D MOF nanosheets and the target pollutants, which also gave rise to fast adsorption kinetics with relative high removal efficiencies in the low concentrations, even in seawater. Moreover, a facile recyclability with fast desorption kinetics can also be achieved for the MOF nanosheets. The excellent iodine removal performance in aqueous solution demonstrated that the electrostatic attraction between MOF nanosheets with a positive charge and the negatively charged triiodide (I₃^-, the dominant form of iodine in aqueous solution) is the driving force in adsorption, which endows the adsorbents with the characteristics of fast adsorption and desorption kinetics. The adsorption mechanism was systematically verified by the studies of ζ potential, Fourier transform infrared, X-ray photoelectron spectroscopy, and Raman spectra.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH₃ groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

Selenite capture by MIL-101 (Fe) through FeOSe bonds at free coordination Fe sites

Selective immobilization of SeO₃^2- is highly desired for the remediation of Se-contaminated water. Thus, the irreversible sorption of SeO₃^2- ions by adsorbents through unique coordination bonds with high affinity is needed. Herein, we demonstrated that Fe-based metal-organic framework (MOF) (Fe-MIL-101) with free coordination sites (FCSs) enabled selective and irreversible capture of SeO₃^2- ions from aqueous solution with fast kinetics and a high uptake capacity of 183.7 mg∙g^-1, owing to large MOF apertures and substantial numbers of FCSs as capture sites through forming Fe-O-Se bonds. Meanwhile, Fe-MIL-101 maintained excellent performance in a broad pH range (4-11) and high selectivity for SeO₃^2- ions in the presence of excessive competitive anions (e.g., CO₃^2-, PO₄^3-). Density functional theory (DFT) calculation, extended X-ray absorption fine structure (EXAFS), and Mössbauer fittings confirmed that the capture on Fe-MIL-101 was through the Fe-O-Se coordination bonds between FCSs and SeO₃^2-. Moreover, Fe-MIL-101 could effectively remove SeO₃^2- in simulated natural water and sewage by overcoming the influence of co-existing ions and organic matters. This study highlights new opportunities for the design of MOF-based materials for removing toxic and radioactive anions with irreversibility and high selectivity from natural and waste water.

Precise fabrication of porous polymer frameworks using rigid polyisocyanides as building blocks: from structural regulation to efficient iodine capture

Porous materials have recently attracted much attention owing to their fascinating structures and broad applications. Moreover, exploring novel porous polymers affording the efficient capture of iodine is of significant interest. In contrast to the reported porous polymers fabricated with small molecular blocks, we herein report the preparation of porous polymer frameworks using rigid polyisocyanides as building blocks. First, tetrahedral four-arm star polyisocyanides with predictable molecular weight and low dispersity were synthesized; the chain-ends of the rigid polyisocyanide blocks were then crosslinked, yielding well-defined porous organic frameworks with a designed pore size and narrow distribution. Polymers of appropriate pore size were observed to efficiently capture radioactive iodine in both aqueous and vapor phases. More than 98% of iodine could be captured within 1 minute from a saturated aqueous solution (capacity of up to 3.2 g g-1), and an adsorption capacity of up to 574 wt% of iodine in vapor was measured within 4 hours. Moreover, the polymers could be recovered and recycled for iodine capture for at least six times, while maintaining high performance.

Anion-Afforded Functions of Ionic Metal-Organic Frameworks: Ionochromism, Anion Conduction, and Catalysis

The exchangeable counterions in ionic metal-organic frameworks (IMOFs) provide facile and versatile handles to manipulate functions associated with the ionic guests themselves and host-guest interactions. However, anion-exchangeable stable IMOFs combining multiple anion-related functions are still undeveloped. In this work, a novel porous IMOF featuring unique self-penetration was constructed from an electron-deficient tris(pyridinium)-tricarboxylate zwitterionic ligand. The water-stable IMOF undergoes reversible and single-crystal-to-single-crystal anion exchange and shows selective and discriminative ionochromic behaviors toward electron-rich anions owing to donor-acceptor interactions. The IMOFs with different anions are good ionic conductors with low activation energy, the highest conductivity being observed with chloride. Furthermore, integrating Lewis acidic sites and nucleophilic guest anions in solid state, the IMOFs act as heterogeneous and recyclable catalysts to efficiently catalyze the cycloaddition of CO₂ to epoxides without needing the use of halide cocatalysts. The catalytic activity is strongly dependent upon the guest anions, and the iodide shows the highest activity. The results demonstrate the great potential of developing IMOFs with various functions related to the guest ions included in the porous matrices.

A rare potassium-rich zirconium fluorophosphonate with high Eu3+ adsorption capacities from acidic solutions

A novel 3D potassium-containing zirconium fluorophosphonate K2Zr[CH2(PO3)2]F2 (SZ-8) was successfully synthesized as single crystals via a solvothermal method using the mixture of nitric acid and potassium nitrate as mineralizers. SZ-8...

A cationic -lanthanide MOF enhances the uptake of iodine vapour at room temperature

The cationization of a RE fcu MOF using the asymmetric ligand exchange (ALE) methodology was found to be beneficial for boosting iodine vapor uptake, a proof-of-concept for the confinement of polarizable and anionic species in the pores of the MOF.

Alkali Metal Ion-exchange in a Metal-Organic Framework Based on Lanthanum and 1,4-Phenylenebis(methylidyne)tetrakis(phosphonic acid)

The ion-exchange selectivity of four metal-organic frameworks (denoted as MLaL), formed by alkali metal ions (M⁺), La³⁺, and 1,4-phenylenebis(methylidyne)tetrakis(phosphonic acid) (L), was examined. Unusual selectivity for the alkali metal ions was observed, which did not follow the previously proposed mechanism that was explained based on the ion-size similarity in the framework. The changes in the crystal structures after ion-exchange reactions were observed by powder X-ray diffraction analysis. The change in the lattice energy in a mixed-metal framework is likely to be one of the significant parameters to affect ion-exchange selectivity.

Three-in-One C2 H2 -Selectivity-Guided Adsorptive Separation across an Isoreticular Family of Cationic Square-Lattice MOFs

Energy-efficient selective physisorption driven C₂ H₂ separation from industrial C2-C1 impurities such as C₂ H₄ , CO₂ and CH₄ is of great importance in the purification of downstream commodity chemicals. We address this challenge employing a series of isoreticular cationic metal-organic frameworks, namely iMOF-nC (n=5, 6, 7). All three square lattice topology MOFs registered higher C₂ H₂ uptakes versus the competing C2-C1 gases (C₂ H₄ , CO₂ and CH₄ ). Dynamic column breakthrough experiments on the best-performing iMOF-6C revealed the first three-in-one C₂ H₂ adsorption selectivity guided separation of C₂ H₂ from 1:1 C₂ H₂ /CO₂ , C₂ H₂ /C₂ H₄ and C₂ H₂ /CH₄ mixtures. Density functional theory calculations critically examined the C₂ H₂ selective interactions in iMOF-6C. Thanks to the abundance of square lattice topology MOFs, this study introduces a crystal engineering blueprint for designing C₂ H₂ -selective layered metal-organic physisorbents, previously unreported in cationic frameworks.

Constructing Cationic Metal-Organic Framework Materials Based on Pyrimidyl as a Functional Group for Perrhenate/Pertechnetate Sorption

Cationic metal-organic framework (MOF) materials are widely used in the anion separation field, but there are few reports of pyrimidyl ligands as building units. In this work, three new cationic MOFs based on pyrimidyl as functional group ligands were synthesized for the removal of radioactive pertechnetate from aqueous solution. The pyrimidyl ligands were designed by incorporating pyrimidyl units into the skeletons of benzene, triphenylamine, and tetraphenylethylene, respectively. Taking advantage of multiple coordination sites of pyrimidyl groups, three cationic MOFs (ZJU-X11, ZJU-X12, and ZJU-X13) with diverse structures were solvothermally synthesized using silver ion as the metal node. Scanning electron microscopy-energy-dispersive spectroscopy mapping demonstrated that these three cationic MOFs could capture ReO₄^- via anion exchange, but the sorption capabilities were distinctly different. With 95% removal toward ReO₄^-, ZJU-X11 showed the strongest anion-exchange competence among the three MOFs. According to the results of batch experiments, ZJU-X11 could achieve sorption equilibrium within 10 min, remove 518 mg of ReO₄^- per 1 g of ZJU-X11, remove most of ReO₄^- after four recycles, and maintain satisfactory selectivity in the presence of excess competing anions, which is one of the best MOF materials for removing ReO₄^-/TcO₄^- among the three cationic MOFs. This work indicates that the pyrimidyl group is a promising multiple site to build versatile cationic MOFs.

Materials interacting with inorganic selenium from the perspective of electrochemical sensing

Inorganic selenium, the most common form of harmful selenium in the environment, can be determined using electrochemical sensors, which are compact, fast, reliable and easy-to-operate devices. Despite progress in this area, there is still significant room for developing high-performance selenium electrochemical sensors. To achieve this, one should take into account (i) the electrochemical process that selenium undergoes on the electrode; (ii) the valence state of selenium species in the sample and (iii) modification of the sensor surface by a material with high affinity to selenium. The goal of this review is to provide a knowledge base for these issues. After the Introduction section, mechanisms and principles of the electrochemical reduction of selenium are introduced, followed by a section introducing the modification of electrodes with materials interacting with selenium and a section dedicated to speciation methods, including the reduction of non-detectable Se(VI) to detectable Se(IV). In the following sections, the main types of materials (metallic, polymers, hybrid (nano)materials…) interacting with inorganic selenium (mostly absorbents) are reviewed to show the diversity of properties that may be endowed to sensors if the materials were to be used for the modification of electrodes. These features for the main material categories are outlined in the conclusion section, where it is stated that the engineered polymers may be the most promising modifiers.

The Synthesis and Properties of TIPA-Dominated Porous Metal-Organic Frameworks

Metal-Organic Frameworks (MOFs) as a class of crystalline materials are constructed using metal nodes and organic spacers. Polydentate N-donor ligands play a mainstay-type role in the construction of metal-organic frameworks, especially cationic MOFs. Highly stable cationic MOFs with high porosity and open channels exhibit distinct advantages, they can act as a powerful ion exchange platform for the capture of toxic heavy-metal oxoanions through a Single-Crystal to Single-Crystal (SC-SC) pattern. Porous luminescent MOFs can act as nano-sized containers to encapsulate guest emitters and construct multi-emitter materials for chemical sensing. This feature article reviews the synthesis and application of porous Metal-Organic Frameworks based on tridentate ligand tris (4-(1H-imidazol-1-yl) phenyl) amine (TIPA) and focuses on design strategies for the synthesis of TIPA-dominated Metal-Organic Frameworks with high porosity and stability. The design strategies are integrated into four types: small organic molecule as auxiliaries, inorganic oxyanion as auxiliaries, small organic molecule as secondary linkers, and metal clusters as nodes. The applications of ratiometric sensing, the adsorption of oxyanions contaminants from water, and small molecule gas storage are summarized. We hope to provide experience and inspiration in the design and construction of highly porous MOFs base on polydentate N-donor ligands.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Multifunctional Zn-Ln (Ln = Eu and Tb) heterometallic metal-organic frameworks with highly efficient I2 capture, dye adsorption, luminescence sensing and white-light emission

A new family of isostructural 3d-4f heterometallic metal-organic frameworks (HMOFs), [Zn₃Eu_xTb_2-x(TZI)₄(DMA)₅(H₂O)₃]·4DMA [x = 0 (1), 0.3 (2), 0.6 (3), 0.9 (4), 1 (5), 1.2 (6), 1.5 (7), 1.8 (8), 2 (9)], has been synthesized using the 5-(4-(tetrazol-5-yl) phenyl)isophthalic acid (H₃TZI) ligand, Ln^III ions and Zn^II ions under solvothermal conditions. All HMOFs exhibit a (3,3,4,5,5)-connected 6³·6³(4²·6²·8²)(4·6⁵·8)(4·6⁶·8³) topology, which features three different types of motifs: one is a mononuclear Zn^II ion and the other two motifs are binuclear [Zn(COO)₃Ln] clusters. The adsorption experiments indicate that Zn₃Tb₂ (1) could efficiently remove almost all I₂ from cyclohexane solution after 12 h and also showed better adsorption towards neutral red (NR) dye (adsorption: only the Zn₃Tb₂ (1) was taken as one representative). Simultaneously, the luminescence sensing showed that Zn₃Tb₂ (1) and Zn₃Eu₂ (9) have excellent response and sensitivity towards pollutants such as Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) with high selectivity and a fairly low limit of detection through luminescence quenching effect. Moreover, seven trimetallic-doped HMOFs 2-8 analogues of Zn₃Ln₂ (single) HMOFs were designed and prepared, showing different changes of luminescent color. More interestingly, Zn₃Eu_1.5Tb_0.5 (7) with white-light emission was fabricated by doping relative concentrations of Eu³⁺ and Tb³⁺ ions. To the best of our knowledge, Zn₃Eu_1.5Tb_0.5 (7) represents a novel kind of heterometallic Zn₃Ln₂ HMOFs with white-light emission. It could be deduced that the excellent characteristics, namely strong typical luminescence emission of Zn^II and Ln^III ions, microporous channels, active open metal sites (tetra-coordinated Zn^II-metal sites), and uncoordinated carboxylate O atoms and uncoordinated tetrazolate N atoms, made the above HMOFs an ideal platform for adsorption, luminescence sensing, and white-light emission. More significantly, these HMOFs are the first reported Zn-Ln heterometallic materials with the H₃TZI ligand.

Neutral Nitrogen Donor Ligand-based MOFs for Sensing Applications

Neutral nitrogen donor (N-donor) ligand-based MOFs, with their enticing features inclusive of facile synthesis, labile metal-ligand bond, framework flexibility, atomic level tunability renders them appealing in molecular recognition-based studies. Intriguingly, the flexibility in such systems (owing to weaker metal-nitrogen bonds) promote maximization of host-analyte interactions, which is critical for the manifestation of a signaling response. Such host-analyte interactions can be tapped by discerning any change in the physical properties associated with the system, such as optical, fluorometric, chemiresistive, magnetic, dielectric constant, mass. This minireview presents a brief discussion on the various types of signal transduction pathways unveiled hitherto using neutral N-donor ligand-based MOFs and the fundamental insight into the signal's origin. Moreover, an elaborate compilation of the recent examples in this field has been presented. Also, the untapped prospects have been highlighted, which may serve as a beacon to drive future research.

Functionalized Ionic Porous Organic Polymers Exhibiting High Iodine Uptake from Both the Vapor and Aqueous Medium

Large-scale generation of radioactive iodine (¹²⁹I, ¹³¹I) in nuclear power plants pose a critical threat in the event of fallout, thus rendering the development of iodine sequestering materials (from both the vapor and aqueous medium) highly pivotal. Herein, we report two chemically stable ionic polymers containing multiple binding sites, including phenyl rings, imidazolium cations, and bromide anions, which in synergy promote adsorption of iodine/triiodide anions. In brief, exceptional iodine uptake (from the vapor phase) was observed at nuclear fuel reprocessing conditions. Furthermore, the ionic nature propelled removal of >99% of I₃^- from water within 30 min. Additionally, benchmark uptake capacities, as well as unprecedented selectivity, were observed for I₃^-anions. The excellent affinity (distribution coefficient, ∼10⁵ mL/g) enabled iodine capture from seawater-spiked samples. Moreover, iodine-loaded compounds showed conductivity (10^-4 S/cm, 10^-6 S/cm), placing them among the best known conducting porous organic polymers. Lastly, DFT studies unveiled key insights in coherence with the experimental findings.

Recognition and Sequestration of Toxic Inorganic Water Pollutants with Hydrolytically Stable Metal-Organic Frameworks

Water pollution and crisis of freshwater is one of the most alarming concern globally, which threatens the development and survival of living beings. Recycling of contaminated water has been the prime demand of 21^st century as the area of contamination in natural waterbodies increasing rapidly worldwide. Detoxification and purification of wastewater via adsorptive removal technology has been proven to be more efficient because of it's simplicity, lesser complexity and cost-effectiveness. As the most rapid-growing division of coordination chemistry, porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) with the liberty of crafting tailorable porous architecture and presence of numerous functional sites have become quintessential for recognition and sequestration of water pollutants. This personal account intends to highlight our recent contributions in the field of sensing and sequestration of toxic aquatic inorganic pollutants by functionalized water stable MOFs.

Encapsulated anion-dominated photocatalytic and adsorption performances for organic dye degradation and oxoanion pollutant capture over cationic Cu(i)-organic framework semiconductors

Decontamination of industrial wastewater containing toxic organic dye molecules and oxoanions is urgently desirable for environmental sustainability and human health. Water-stable porous metal-organic frameworks (MOFs) have emerged as highly efficient photocatalysts and/or adsorbents for water purification through controllable integration of the constitutive requirements. To reveal the inclusion anion effect of microporous MOFs on wastewater treatment, two isostructural MOFs incorporating positive charge and semiconductive characteristics, {[Cu(tpt)]·3H₂O·0.5SO₄}_n (1) and {[Cu(tpt)]·2H₂O·ClO₄}_n (2, tpt = 2,4,6-tris(4-pyridyl)-1,3,5-triazine), have been synthesized and employed as dual-functional materials for both dye photodegradation and oxoanion removal. The two MOFs possess the same 3-fold interpenetrating cationic backbones but are encapsulated by highly disordered sulfate or perchlorate in the open channels. These included anions have significantly tuned the hydrophilicity of the channels, extended the visible-light absorption, optimized the bandgap and decreased the conduction band potential. Under the low-energy irradiation of a 30 W LED lamp, MOF 1 has selectively and efficiently degraded rhodamine B compared to 2 with accelerated kinetics, resulting from the stronger reduction ability and less migration resistance of the photogenerated electrons. Instead, MOF 2 can quickly capture harmful MnO₄^- and Cr₂O₇^2- by exchanging with the entrapped ClO₄^-, with maximum adsorption amounts of 557 and 168 mg g^-1, respectively, under ambient conditions. The improved decolorization of the aqueous solution over 2 benefits essentially from the shape and charge memory effect and the smaller hydration energy of ClO₄^- than SO₄^2-. These interesting observations highlight the importance of the included anions inside the porous MOF semiconductors on wastewater treatment.

Luminescent metal–organic frameworks as chemical sensors based on “mechanism–response”: a review

The comprehensive review systematically summarizes the recent developments in the study of LMOFs as chemical sensors based on “mechanism–response”.

A hydrolytically stable cage-based metal–organic framework containing two types of building blocks for the adsorption of iodine and dyes

A metal–organic framework (SCNU-Z4) with high chemical stability in water and common organic solvents showed ability for iodine and dye adsorption.

A Water-Stable Cationic Metal-Organic Framework with Hydrophobic Pore Surfaces as an Efficient Scavenger of Oxo-Anion Pollutants from Water

Water contamination due to heavy metal-based toxic oxo-anions (such as CrO₄^2- and TcO₄^-) is a critical environmental concern that demands immediate mitigation. Herein, we present an effort to counter this issue by a novel chemically stable cationic metal-organic framework (iMOF-2C) with strategic utilization of a ligand with hydrophobic core, known to facilitate such oxo-anion capture process. Moreover, the compound exhibited very fast sieving kinetics for such oxo-anions and a very high uptake capacity for CrO₄^2- (476.3 mg g^-1) and ReO₄^- (691 mg g^-1), while the latter being employed as a surrogate analogue for radioactive TcO₄^- anions. Notably, the compound showed excellent selectivity even in the presence of other competing anions such as NO₃^-, Cl^-, SO₄^2-, ClO₄^-. etc.. Furthermore, the compound possesses excellent reusability (up to 10 cycles) and is also employed to a stationary phase ion column to decontaminate the aforementioned oxo-anions from water.