Transient DNA‐Based Nanostructures Controlled by Redox Inputs

Acyl Phosphates as Chemically Fueled Building Blocks for Self-Sustaining Protocells

Lipids spontaneously assemble into vesicle-forming membranes. Such vesicles serve as compartments for even the simplest living systems. Vesicles have been extensively studied for constructing synthetic cells or as models for protocells-the cells hypothesized to have existed before life. These compartments exist almost always close to equilibrium. Life, however, exists out of equilibrium. In this work, we studied vesicle-based compartments regulated by a non-equilibrium chemical reaction network that converts activating agents. In this way, the compartments require a constant or periodic supply of activating agents to sustain themselves. Specifically, we use activating agents to condense carboxylates and phosphate esters into acyl phosphate-based lipids that form vesicles. These vesicles can only be sustained when condensing agents are present; without them, they decay. We demonstrate that the chemical reaction network can operate on prebiotic activating agents, opening the door to prebiotically plausible, self-sustainable protocells that compete for resources. In future work, such protocells should be endowed with a genotype, e.g., self-replicating RNA structures, to alter the protocell's behavior. Such protocells could enable Darwinian evolution in a prebiotically plausible chemical system.

Electrically Powered Dissipative Hydrogel Networks Reveal Transient Stiffness Properties for Out-of-Equilibrium Operations

Living systems use dissipative processes to enable precise spatiotemporal control over various functions, including the transient modulation of the stiffness of tissues, which, however, is challenging to achieve in soft materials. Here, we report a new platform to program hydrogel films with tunable, time-dependent mechanical properties under out-of-equilibrium conditions, powered by electricity. We show that the lifetime of the transient network of a surface-confined hydrogel film can be effectively controlled by programming the generation of an electrochemically oxidized mediator in the presence of a chemical or photoreducing agent in solution. It is, therefore, electrically possible to direct the transient stiffening or softening of the hydrogel film, enabling high modularity of the material functions with precise spatiotemporal control. Temporally controlled operations of the hydrogel films are demonstrated for the on-demand, dose-controlled release of multiple model protein payloads from electrode arrays using the present electrically powered dissipative system. This demonstration of electrically driven transient modulation of the stiffness properties of hydrogel films represents an important step toward the engineering of dissipative materials for developing future biomedical applications that can harness the temporal, adaptive properties of this new class of materials.

Dynamic monitoring of an enzymatically driven dissipative toehold-mediated strand displacement reaction

A general strategy to program self-resettable and dissipative toehold-mediated strand displacement reactions was proposed, using DNA strands as the fuel and lambda exonuclease as the fuel-consuming unit. This non-equilibrium system is reversible and temporally controllable. Furthermore, it can be well integrated into a DNA network to temporally control its cascade reaction or dynamic behaviour.

Decorated DNA-Based Scaffolds as Lateral Flow Biosensors

Here we develop Lateral Flow Assays (LFAs) that employ as functional elements DNA-based structures decorated with reporter tags and recognition elements. We have rationally re-engineered tile-based DNA tubular structures that can act as scaffolds and can be decorated with recognition elements of different nature (i.e. antigens, aptamers or proteins) and with orthogonal fluorescent dyes. As a proof-of-principle we have developed sandwich and competitive multiplex lateral flow platforms for the detection of several targets, ranging from small molecules (digoxigenin, Dig and dinitrophenol, DNP), to antibodies (Anti-Dig, Anti-DNP and Anti-MUC1/EGFR bispecific antibodies) and proteins (thrombin). Coupling the advantages of functional DNA-based scaffolds together with the simplicity of LFAs, our approach offers the opportunity to detect a wide range of targets with nanomolar sensitivity and high specificity.

Flexible Self-Powered Sensing System Based on Novel DNA Circuit Strategy and Graphdiyne for Thalassemia Gene by Rapid Naked-Eye Tracking and Open-Circuit Voltage

Based on the controllable instantaneous self-assembly ability of long-chain branched DNA nanostructures and the synergistic effect between nucleic acid amplification without enzymes, a highly sensitive and highly specific self-powered biosensing platform is developed. Two-dimensional graphdiyne is prepared, modified on flexible carbon cloth, and then functionalized with gold nanoparticles. When DNA mi-tubes are applied on it, target thalassemia gene CD122 triggers a dual-catalytic hairpin assembly reaction. The generated nanoscale DNA is precisely captured by the DNA mi-tube, exposing binding sites and activating the hybridization chain reaction to form long-chain branched DNA. Double-stranded DNA, along with dendritic DNA carrying a large number of guanine bases, precisely captures the signal molecule methylene blue (MB), generating a significant electrochemical signal. The redox reaction of MB also causes a proportional change in the system's color, achieving a colorimetric detection functionality. An efficient dual-mode self-powered sensing platform, therefore, is established for detecting the thalassemia gene CD122. The linear response range of target concentration to open-circuit voltage and RGB Blue value is 0.0001-10,000 pM. The detection limit under electrochemical mode is 36.3 aM (S/N = 3), and under colorimetric mode, it is as low as 12.1 aM (S/N = 3). The new method exhibits high sensitivity, excellent selectivity, and high accuracy, providing a universal strategy for designing novel biosensing platforms that can be extended to the detection of other biomolecules.

Minimalist Design of Wireframe DNA Nanotubes: Tunable Geometry, Size, Chirality, and Dynamics

DNA nanotubes (NTs) have attracted extensive interest as artificial cytoskeletons for biomedical, synthetic biology, and materials applications. Here, we report the modular design and assembly of a minimalist yet robust DNA wireframe nanotube with tunable cross-sectional geometry, cavity size, chirality, and length, while using only four DNA strands. We introduce an h-motif structure incorporating double-crossover (DX) tile-like DNA edges to achieve structural rigidity and provide efficient self-assembly of h-motif-based DNA nanotube (H-NT) units, thus producing programmable, micrometer-long nanotubes. We demonstrate control of the H-NT nanotube length via short DNA modulators. Finally, we use an enzyme, RNase H, to take these structures out of equilibrium and trigger nanotube assembly at a physiologically relevant temperature, underlining future cellular applications. The minimalist H-NTs can assemble at near-physiological salt conditions and will serve as an easily synthesized, DNA-economical modular template for biosensors, plasmonics, or other functional materials and as cost-efficient drug-delivery vehicles for biomedical applications.

Building Large DNA Bundles via Controlled Hierarchical Assembly of DNA Tubes

Structural DNA nanotechnology is capable of fabricating designer nanoscale artificial architectures. Developing simple and yet versatile assembly methods to construct large DNA structures of defined spatial features and dynamic capabilities has remained challenging. Herein, we designed a molecular assembly system where DNA tiles can assemble into tubes and then into large one-dimensional DNA bundles following a hierarchical pathway. A cohesive link was incorporated into the tile to induce intertube binding for the formation of DNA bundles. DNA bundles with length of dozens of micrometers and width of hundreds of nanometers were produced, whose assembly was revealed to be collectively determined by cationic strength and linker designs (binding strength, spacer length, linker position, etc.). Furthermore, multicomponent DNA bundles with programmable spatial features and compositions were realized by using various distinct tile designs. Lastly, we implemented dynamic capability into large DNA bundles to realize reversible reconfigurations among tile, tube, and bundles following specific molecular stimulations. We envision this assembly strategy can enrich the toolbox of DNA nanotechnology for rational design of large-size DNA materials of defined features and properties that may be applied to a variety of fields in materials science, synthetic biology, biomedical science, and beyond.

A Dynamic Control Center Based on a DNA Reaction Network for Programmable Building of DNA Nanostructures

DNA-based nanostructures allow for complex self-assembly with nanometer precision through the specificity of Watson-Crick base pairing, but network behavior-directed control of the kinetic process is less studied. Here we show how the DNA reaction network (DRN), which has emerged as a reliable and programmable way to implement artificial network dynamics, can be built as the control center of programmable nanostructures, allowing spatiotemporal control over the dynamic behavior of DNA nanotubes. We chose a common network motif in biological control systems, the feed-forward loop, as the model network and demonstrated that dynamic behaviors, such as self-tuning control and multilayer hierarchical assembly, could be programmed by constructing an inhibition network and an excitation network, separately, in buffer solution and inside protocells.

Waste-Free Fully Electrically Fueled Dissipative Self-Assembly System

The importance and prevalence of energy-fueled active materials in living systems have inspired the design of synthetic active materials using various fuels. However, several major limitations of current designs remain to be addressed, such as the accumulation of chemical wastes during the process, unsustainable active behavior, and the lack of precise spatiotemporal control. Here, we demonstrate a fully electrically fueled (e-fueled) active self-assembly material that can overcome the aforementioned limitations. Using an electrochemical setup with dual electrocatalysts, the anodic oxidation of one electrocatalyst (ferrocyanide, [Fe(CN)₆]^4-) creates a positive fuel to activate the self-assembly, while simultaneously, the cathodic reduction of the other electrocatalyst (methyl viologen, [MV]²⁺) generates a negative fuel triggering fiber disassembly. Due to the fully catalytic nature for the reaction networks, this fully e-fueled active material system does not generate any chemical waste, can sustain active behavior for an extended period when the electrical potential is maintained, and provides spatiotemporal control.

Cumulative Effect of pH and Redox Triggers on Highly Adaptive Transient Coacervates

An intricate synergism between multiple biochemical processes and physical conditions determines the formation and function of various biological self-assemblies. Thus, a complex set of variables dictate the far-from-equilibrium nature of these biological assemblies. Mimicking such systems synthetically is a challenging task. We report multi-stimuli responsive transient coacervation of an aldehyde-appended polymer and a short peptide. The coacervates are formed by the disulphide linkages between the peptide molecules and the imine bond between the polymer and the peptide. Imines are susceptible to pH changes and the disulphide bonds can be tuned by oxidation/reduction processes. Thus, the coacervation is operational only under the combined effect of appropriate pH and oxidative conditions. Taking advantage of these facts, the coacervates are transiently formed under a pH cycle (urea-urease/gluconolactone) and a non-equilibrium redox cycle (TCEP/H₂ O₂ ). Importantly, the system showed high adaptability toward environmental changes. The transient existence of the coacervates can be generated without any apparent change in size and shape within the same system through the sequential application of the above-mentioned nonequilibrium reaction cycles. Additionally, the coacervation allows for efficient encapsulation/stabilisation of proteins. Thus, the system has the potential to be used for protein/drug delivery purposes in the future.

Communication and Cross-Regulation between Chemically Fueled Sender and Receiver Reaction Networks

Nature connects multiple fuel-driven chemical/enzymatic reaction networks (CRNs/ERNs) via cross-regulation to hierarchically control biofunctions for a tailored adaption in complex sensory landscapes. Herein, we introduce a facile example of communication and cross-regulation among two fuel-driven DNA-based ERNs regulated by a concatenated RNA transcription regulator. ERN1 ("sender") is designed for the fuel-driven promoter formation for T7 RNA polymerase, which activates RNA transcription. The produced RNA can deactivate or activate DNA in ERN2 ("receiver") by toehold-mediated strand displacement, leading to a communication between two ERNs. The RNA from ERN1 can repress or promote the fuel-driven state of ERN2; ERN2 in turn feedbacks to regulate the lifetime of ERN1. Furthermore, the incorporation of RNase H allows for RNA degradation and enables the autonomous recovery of ERN2. We believe that concatenation of multiple CRNs/ERNs provides a basis for the design of more elaborate autonomous regulatory mechanisms in systems chemistry and synthetic biology.

DNA strand displacement based computational systems and their applications

DNA computing has become the focus of computing research due to its excellent parallel processing capability, data storage capacity, and low energy consumption characteristics. DNA computational units can be precisely programmed through the sequence specificity and base pair principle. Then, computational units can be cascaded and integrated to form large DNA computing systems. Among them, DNA strand displacement (DSD) is the simplest but most efficient method for constructing DNA computing systems. The inputs and outputs of DSD are signal strands that can be transferred to the next unit. DSD has been used to construct logic gates, integrated circuits, artificial neural networks, etc. This review introduced the recent development of DSD-based computational systems and their applications. Some DSD-related tools and issues are also discussed.

Regulating DNA-Hybridization Using a Chemically Fueled Reaction Cycle

Molecular machines, such as ATPases or motor proteins, couple the catalysis of a chemical reaction, most commonly hydrolysis of nucleotide triphosphates, to their conformational change. In essence, they continuously convert a chemical fuel to drive their motion. An outstanding goal of nanotechnology remains to synthesize a nanomachine with similar functions, precision, and speed. The field of DNA nanotechnology has given rise to the engineering precision required for such a device. Simultaneously, the field of systems chemistry developed fast chemical reaction cycles that convert fuel to change the function of molecules. In this work, we thus combined a chemical reaction cycle with the precision of DNA nanotechnology to yield kinetic control over the conformational state of a DNA hairpin. Future work on such systems will result in out-of-equilibrium DNA nanodevices with precise functions.

Versatile Electrochemical Biosensor Based on the Target-Controlled Capture and Release of DNA Nanotubes for the Ultrasensitive Detection of Multiplexed Biomarkers

Herein, an ultrasensitive and versatile electrochemical biosensor was developed through the target-controlled capture and release of signal probe-loaded DNA nanotube for the ultrasensitive detection of two different types of cancer-related biomarkers, microRNA-21 (miRNA-21) and glutathione (GSH). In this system, target 1 (miRNA-21) first triggered duplex-specific nuclease (DSN)-assisted recycle amplification to generate numerous disulfide-linked DNA strands (DL), which could effectively capture DNA nanotube to immobilize methylene blue (MB) to produce remarkable electrochemical signals and achieve the ultrasensitive detection of miRNA-21 with a detection limit down to 32.6 aM. Furthermore, in the presence of target 2 (GSH), the electrochemical signal was significantly reduced by a thiol-disulfide bond exchange reaction on DL to release MB-immobilized DNA nanotubes away from the sensing interface, which enabled the sensitive analysis of GSH with a detection limit of 0.379 nM. Impressively, this strategy could achieve ultrasensitive detection of different types of biomarkers to prominently lessen false-positive responses from the current sensing methods toward a single biomarker or the same type of biomarker and remarkably heighten the accuracy and precision of early cancer diagnosis. Meanwhile, the proposed electrochemical biosensor made it possible to realize the regenerative analysis of targets over four times without extra fuel, which could conspicuously improve the analytical efficiency compared with that of traditional biosensing assays. As a result, this study might open up novel insights to design a versatile and multifunctional sensing platform and encourage deeper exploration for detecting different types of biomarkers in the fields of early disease diagnosis and biochemical research.

Powering ≈50 µm Motion by a Molecular Event in DNA Crystals

A major challenge in material design is to couple nanoscale molecular and supramolecular events into desired chemical, physical, and mechanical properties at the macroscopic scale. Here, a novel self-assembled DNA crystal actuator is reported, which has reversible, directional expansion and contraction for over 50 μm in response to versatile stimuli, including temperature, ionic strength, pH, and redox potential. The macroscopic actuation is powered by cooperative dissociation or cohesion of thousands of DNA sticky ends at the designed crystal contacts. The increase in crystal porosity and cavity in the expanded state dramatically enhances the crystal capability to accommodate/encapsulate nanoparticles/proteins, while the contraction enables a "sponge squeezing" motion for releasing nanoparticles. This crystal actuator is envisioned to be useful for a wide range of applications, including powering self-propelled robotics, sensing subtle environmental changes, constructing functional hybrid materials, and working in drug controlled-release systems.

Functional DNA-based cytoskeletons for synthetic cells

The cytoskeleton is an essential component of a cell. It controls the cell shape, establishes the internal organization, and performs vital biological functions. Building synthetic cytoskeletons that mimic key features of their natural counterparts delineates a crucial step towards synthetic cells assembled from the bottom up. To this end, DNA nanotechnology represents one of the most promising routes, given the inherent sequence specificity, addressability and programmability of DNA. Here we demonstrate functional DNA-based cytoskeletons operating in microfluidic cell-sized compartments. The synthetic cytoskeletons consist of DNA tiles self-assembled into filament networks. These filaments can be rationally designed and controlled to imitate features of natural cytoskeletons, including reversible assembly and ATP-triggered polymerization, and we also explore their potential for guided vesicle transport in cell-sized confinement. Also, they possess engineerable characteristics, including assembly and disassembly powered by DNA hybridization or aptamer–target interactions and autonomous transport of gold nanoparticles. This work underpins DNA nanotechnology as a key player in building synthetic cells.

Cytoskeletons are essential components of cells that perform a variety of tasks, and artificial cytoskeletons that perform these functions are required for the bottom-up assembly of synthetic cells. Now, a multi-functional cytoskeleton mimic has been engineered from DNA, consisting of confined DNA filaments that are capable of reversible self-assembly and transport of gold nanoparticles and vesicular cargo.

Dissipative Control over the Toehold-Mediated DNA Strand Displacement Reaction

Here we show a general approach to achieve dissipative control over toehold-mediated strand-displacement, the most widely employed reaction in the field of DNA nanotechnology. The approach relies on rationally re-engineering the classic strand displacement reaction such that the high-energy invader strand (fuel) is converted into a low-energy waste product through an energy-dissipating reaction allowing the spontaneous return to the original state over time. We show that such dissipative control over the toehold-mediated strand displacement process is reversible (up to 10 cycles), highly controllable and enables unique temporal activation of DNA systems. We show here two possible applications of this strategy: the transient labelling of DNA structures and the additional temporal control of cascade reactions.

Dissipative DNA nanotechnology

DNA nanotechnology has emerged as a powerful tool to precisely design and control molecular circuits, machines and nanostructures. A major goal in this field is to build devices with life-like properties, such as directional motion, transport, communication and adaptation. Here we provide an overview of the nascent field of dissipative DNA nanotechnology, which aims at developing life-like systems by combining programmable nucleic-acid reactions with energy-dissipating processes. We first delineate the notions, terminology and characteristic features of dissipative DNA-based systems and then we survey DNA-based circuits, devices and materials whose functions are controlled by chemical fuels. We emphasize how energy consumption enables these systems to perform work and cyclical tasks, in contrast with DNA devices that operate without dissipative processes. The ability to take advantage of chemical fuel molecules brings dissipative DNA systems closer to the active molecular devices that exist in nature.

Dissipative biocatalytic cascades and gated transient biocatalytic cascades driven by nucleic acid networks

Living systems consist of complex transient cellular networks guiding structural, catalytic, and switchable functions driven by auxiliary triggers, such as chemical or light energy inputs. We introduce two different transient, dissipative, biocatalytic cascades, the coupled glucose oxidase (GOx)/horseradish peroxidase (HRP) glucose-driven oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS^2-) to the radical anion (ABTS^•-) and the lactate dehydrogenase (LDH)/nicotinamide adenine dinucleotide (NAD⁺) lactate-driven reduction of NAD⁺ to NADH. The transient biocatalytic systems are driven by nucleic acid reaction modules using a nucleic acid fuel strand L₁' and a nicking enzyme, Nt.BbvCI, as fuel-degrading catalyst, leading to the dynamic spatiotemporal transient formation of structurally proximate biocatalysts activating the biocatalytic cascades and transient coupled processes, including the generation of chemiluminescence and the synthesis of alanine. Subjecting the mixture of biocatalysts to selective inhibitors allows the gated transient operation of the biocatalysts. The kinetics of transient biocatalytic cascades are accompanied by kinetic models and computational simulations.

Electrically Fueled Active Supramolecular Materials

Fuel-driven dissipative self-assemblies play essential roles in living systems, contributing both to their complex, dynamic structures and emergent functions. Several dissipative supramolecular materials have been created using chemicals or light as fuel. However, electrical energy, one of the most common energy sources, has remained unexplored for such purposes. Here, we demonstrate a new platform for creating active supramolecular materials using electrically fueled dissipative self-assembly. Through an electrochemical redox reaction network, a transient and highly active supramolecular assembly is achieved with rapid kinetics, directionality, and precise spatiotemporal control. As electronic signals are the default information carriers in modern technology, the described approach offers a potential opportunity to integrate active materials into electronic devices for bioelectronic applications.

Carbodiimide-Driven Dimerization and Self-Assembly of Artificial, Ribose-Based Amphiphiles

The aqueous self-assembly of amphiphiles into aggregates such as micelles and vesicles has been widely investigated over the past decades with applications ranging from materials science to drug delivery. The combination of characteristic properties of nucleic acids and amphiphiles is of substantial interest to mimic biological self-organization and compartmentalization. Herein, we present ribose- and ribonucleotide-based amphiphiles and investigate their self-assembly as well as their fundamental reactivity. We found that various types of aggregates are formed, ranging in size from nanometers to micrometers and all amphiphiles exhibit aggregation-induced emission (AIE) in solution as well as in the solid state. We also observed that the addition of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) leads to rapid and selective dimerization of the amphiphiles into pyrophosphates, which decreases the critical aggregation concentration (CAC) by a factor of 25 when compared to the monomers. Since the propensity for amphiphile dimerization is correlated with their tendency to self-assemble, our results may be relevant for the formation of rudimentary compartments under prebiotic conditions.

Temporal Control of the Host-Guest Properties of a Calix[6]arene Receptor by the Use of a Chemical Fuel

The host–guest interaction of a 1,3,5-trisaminocalix[6]arene receptor with N-methylisoquinolinium trifluoromethanesulfonate (K_ass of 500 ± 30 M^–1 in CD₂Cl₂) can be dissipatively driven by means of 2-cyano-2-(4′-chloro)phenylpropanoic acid used as a convenient chemical fuel. When the fuel is added to a dichloromethane solution containing the above complex, the host is induced to immediately release the guest in the bulk solution. Consumption of the fuel allows the guest to be re-uptaken by the host. The operation can be satisfactorily reiterated with four subsequent additions of fuel, producing four successive release–reuptake cycles. The percentage of the guest temporarily released in the bulk solution by the host and the time required for the reuptake process can be finely regulated by varying the quantities of added fuel.

Spatiotemporal dynamics of self-assembled structures in enzymatically induced agonistic and antagonistic conditions

Predicting and designing systems with dynamic self-assembly properties in a spatiotemporal fashion is an important research area across disciplines ranging from understanding the fundamental non-equilibrium features of life to the fabrication of next-generation materials with life-like properties. Herein, we demonstrate a spatiotemporal dynamics pattern in the self-assembly behavior of a surfactant from an unorganized assembly, induced by adenosine triphosphate (ATP) and enzymes responsible for the degradation or conversion of ATP. We report the different behavior of two enzymes, alkaline phosphatase (ALP) and hexokinase (HK), towards adenosine triphosphate (ATP)-driven surfactant assembly, which also results in contrasting spatiotemporal dynamic assembly behavior. Here, ALP acts antagonistically, resulting in transient self-assemblies, whereas HK shows agonistic action with the ability to sustain the assemblies. This dynamic assembly behavior was then used to program the time-dependent emergence of a self-assembled structure in a two-dimensional space by maintaining concentration gradients of the enzymes and surfactant at different locations, demonstrating a new route for obtaining 'spatial' organizational adaptability in a self-organized system of interacting components for the incorporation of programmed functionality.

Dissipative control of the fluorescence of a 1,3-dipyrenyl calix[4]arene in the cone conformation

The temporal control (ON/OFF/ON) of the fluorescence of a dichloromethane/acetonitrile 1 : 1 solution of calixarene 3 decorated with two pyrenyl moieties at the upper rim is attained by the addition of CCl₃CO₂H used as a convenient chemical fuel.

Spontaneous Reorganization of DNA-Based Polymers in Higher Ordered Structures Fueled by RNA

We demonstrate a strategy that allows for the spontaneous reconfiguration of self-assembled DNA polymers exploiting RNA as chemical fuel. To do this, we have rationally designed orthogonally addressable DNA building blocks that can be transiently deactivated by RNA fuels and subtracted temporarily from participation in the self-assembly process. Through a fine modulation of the rate at which the building blocks are reactivated we can carefully control the final composition of the polymer and convert a disordered polymer in a higher order polymer, which is disfavored from a thermodynamic point of view. We measure the dynamic reconfiguration via fluorescent signals and confocal microscopy, and we derive a kinetic model that captures the experimental results. Our approach suggests a novel route toward the development of biomolecular materials in which engineered chemical reactions support the autonomous spatial reorganization of multiple components.

Polymorphic transient glycolipid assemblies with tunable lifespan and cargo release

HYPOTHESIS

In living systems, dynamic processes like dissipative assembly, polymorph formation, and destabilization of hydrophobic domains play an indispensable role in the biochemical processes. Adaptation of biological self-assembly processes to an amphiphilic molecule leads to the fabrication of intelligent biomaterials with life-like behavior.

EXPERIMENTS

An amphiphilic glycolipid molecule was engineered into various dissipative assemblies (vesicles and supramolecular nanotube-composed hydrogels) by using two activation steps, including heating-cooling and shear force in method-1 or boric acid/glycolipid complexation and shear force in method-2. The influence of number of activation steps on vesicle to nanotube phase transitions and activation method on the properties of hydrogels were investigated, where the morphological transformations and destabilization of hydrophobic domains resulted from a bilayer to a higher-order crystal structure.

FINDINGS

Hydrophobic and hydrophilic cargos encapsulated in the dissipative assemblies (vesicles and injectable hydrogels) can be released in a controlled manner via changing the activation method. The reported adaptive materials engineered by dual activation steps are promising self-assembled systems for programmed release of loaded cargos at a tunable rate.

Molecular communication relays for dynamic cross-regulation of self-sorting fibrillar self-assemblies

Structures in living systems cross-regulate via exchange of molecular information to assemble or disassemble on demand and in a coordinated, signal-triggered fashion. DNA strand displacement (DSD) reaction networks allow rational design of signaling and feedback loops, but combining DSD with structural nanotechnology to achieve self-reconfiguring hierarchical system states is still in its infancy. We introduce modular DSD networks with increasing amounts of regulatory functions, such as negative feedback, signal amplification, and signal thresholding, to cross-regulate the transient polymerization/depolymerization of two self-sorting DNA origami nanofibrils and nanotubes. This is achieved by concatenation of the DSD network with molecular information relays embedded on the origami tips. The two origamis exchange information and display programmable transient states observable by TEM and fluorescence spectroscopy. The programmability on the DSD and the origami level is a viable starting point toward more complex lifelike behavior of colloidal multicomponent systems featuring advanced signal processing functions.

Dissipative operation of pH-responsive DNA-based nanodevices

We demonstrate here the use of 2-(4-chlorophenyl)-2-cyanopropanoic acid (CPA) and nitroacetic acid (NAA) as convenient chemical fuels to drive the dissipative operation of DNA-based nanodevices. Addition of either of the fuel acids to a water solution initially causes a rapid transient pH decrease, which is then followed by a slower pH increase. We have employed such low-to-high pH cycles to control in a dissipative way the operation of two model DNA-based nanodevices: a DNA nanoswitch undergoing time-programmable open–close–open cycles of motion, and a DNA-based receptor able to release-uptake a DNA cargo strand. The kinetics of the transient operation of both systems can be easily modulated by varying the concentration of the acid fuel added to the solution and both acid fuels show an efficient reversibility which further supports their versatility.

We demonstrate here the use of 2-(4-chlorophenyl)-2-cyanopropanoic acid (CPA) and nitroacetic acid (NAA) as convenient chemical fuels to drive the dissipative operation of DNA-based nanodevices.

A DNA-Based Molecular System That Can Autonomously Add and Extract Components

Many molecular systems in nature undergo autonomous addition and extraction of components in order to execute diverse functions, which rely on molecular components that can sense, process, and transmit information from the environment. Building artificial molecular systems using a similar strategy may lead to the construction of life-like synthetic materials. Herein, we report the design of a dynamic multicomponent molecular system from DNA self-assembly, which is capable of autonomously adding and extracting molecular components initiated by molecular triggers. Orthogonality was integrated into molecular components by harnessing the design capacity of DNA sequences. As a proof of concept, we built a three-component DNA tubular system, which can selectively add or extract one, two, or three components in an orthogonal and programmable manner. We further demonstrated that molecular extraction may be designed in response to environmental cues such as protons. Moreover, the tubes can be disassembled on demand to facilitate their uptake by cells. This work may prime the design of artificial multicomponent molecular systems with increasing complexity, diversity, and functionality that may guide the development of new synthetic materials beyond DNA self-assembly.

Autonomous DNA nanostructures instructed by hierarchically concatenated chemical reaction networks

Concatenation and communication between chemically distinct chemical reaction networks (CRNs) is an essential principle in biology for controlling dynamics of hierarchical structures. Here, to provide a model system for such biological systems, we demonstrate autonomous lifecycles of DNA nanotubes (DNTs) by two concatenated CRNs using different thermodynamic principles: (1) ATP-powered ligation/restriction of DNA components and (2) input strand-mediated DNA strand displacement (DSD) using energy gains provided in DNA toeholds. This allows to achieve hierarchical non-equilibrium systems by concurrent ATP-powered ligation-induced DSD for activating DNT self-assembly and restriction-induced backward DSD reactions for triggering DNT degradation. We introduce indirect and direct activation of DNT self-assemblies, and orthogonal molecular recognition allows ATP-fueled self-sorting of transient multicomponent DNTs. Coupling ATP dissipation to DNA nanostructures via programmable DSD is a generic concept which should be widely applicable to organize other DNA nanostructures, and enable the design of automatons and life-like systems of higher structural complexity.

Light-fueled transient supramolecular assemblies in water as fluorescence modulators

Dissipative self-assembly, which requires a continuous supply of fuel to maintain the assembled states far from equilibrium, is the foundation of biological systems. Among a variety of fuels, light, the original fuel of natural dissipative self-assembly, is fundamentally important but remains a challenge to introduce into artificial dissipative self-assemblies. Here, we report an artificial dissipative self-assembly system that is constructed from light-induced amphiphiles. Such dissipative supramolecular assembly is easily performed using protonated sulfonato-merocyanine and chitosan based molecular and macromolecular components in water. Light irradiation induces the assembly of supramolecular nanoparticles, which spontaneously disassemble in the dark due to thermal back relaxation of the molecular switch. Owing to the presence of light-induced amphiphiles and the thermal dissociation mechanism, the lifetimes of these transient supramolecular nanoparticles are highly sensitive to temperature and light power and range from several minutes to hours. By incorporating various fluorophores into transient supramolecular nanoparticles, the processes of aggregation-induced emission and aggregation-caused quenching, along with periodic variations in fluorescent color over time, have been demonstrated. Transient supramolecular assemblies, which act as fluorescence modulators, can also function in human hepatocellular cancer cells.

Dissipative self-assembly, which requires a continuous supply of fuel to maintain the assembled states far from equilibrium, is the foundation of biological systems but it remains a challenge to introduce light as fuel into artificial dissipative self-assemblies. Here, the authors report an artificial dissipative self-assembly system that is constructed from light-induced amphiphiles.

Gated Dissipative Dynamic Artificial Photosynthetic Model Systems

Gated dissipative artificial photosynthetic systems modeling dynamically modulated environmental effects on the photosynthetic apparatus are presented. Two photochemical systems composed of a supramolecular duplex scaffold, a photosensitizer-functionalized strand (photosensitizer is Zn(II)protoporphyrin IX, Zn(II)PPIX, or pyrene), an electron acceptor bipyridinium (V²⁺)-modified strand, and a nicking enzyme (Nt.BbvCI) act as functional assemblies driving transient photosynthetic-like processes. In the presence of a fuel strand, the transient electron transfer quenching of the photosensitizers, in each of the photochemical systems, is activated. In the presence of a sacrificial electron donor (mercaptoethanol) and continuous irradiation, the resulting electron transfer process in the Zn(II)PPIX/V²⁺ photochemical module leads to the transient accumulation and depletion of the bipyridinium radical-cation (V·⁺) product, and in the presence of ferredoxin-NADP⁺ reductase and NADP⁺, to the kinetically modulated photosynthesis of NADPH. By subjecting the mixture of two photochemical modules to one of two inhibitors, the gated transient photoinduced electron transfer in the two modules is demonstrated. Such gated dissipative process highlights its potential as an important pathway to protect artificial photosynthetic module against overdose of irradiance and to minimize photodamage.

One-Component DNA Mechanoprobes for Facile Mechanosensing in Photopolymerized Hydrogels and Elastomers

DNA mechanosensors offer unique properties for mechano-adaptive and self-reporting materials, such as programmable bond strength and geometrical strain response, tunable fluorescent strain sensing, interfacing to biological systems, and the ability to store mechanical information. However, the facile incorporation of advanced DNA motifs into polymer networks and achieving robustness in application settings remain difficult. Herein, we introduce one-component DNA mechanoprobes that can be easily polymerized into polymer hydrogels and even elastomers to allow strain-induced fluorescence sensing. The all-in-one mechanoprobe contains a DNA hairpin for programmable force sensing, an internal fluorophore-quencher pair as a reporter, and methacrylamide groups on both ends for rapid and facile photopolymerization into networks based on the nontoxic water-soluble monomer methoxy triethylene glycol acrylate (mTEGA). In addition to mechanosensing hydrogels, we utilize the low T_g of p(mTEGA) to develop the first bulk elastomer materials with DNA force sensors, which show high elasticity and stronger mechanofluorescence. The system makes decisive steps forward for DNA-based mechanoprobes by overcoming the classical multicomponent design of such probes, allowing photopolymerization useful for the design of complex objects or even 3D printing and demonstrating that such motifs may even be useful in dry bulk materials.

Fuel-Driven Dynamic Combinatorial Libraries

In dynamic combinatorial libraries, molecules react with each other reversibly to form intricate networks under thermodynamic control. In biological systems, chemical reaction networks operate under kinetic control by the transduction of chemical energy. We thus introduced the notion of energy transduction, via chemical reaction cycles, to a dynamic combinatorial library. In the library, monomers can be oligomerized, oligomers can be deoligomerized, and oligomers can recombine. Interestingly, we found that the dynamics of the library's components were dominated by transacylation, which is an equilibrium reaction. In contrast, the library's dynamics were dictated by fuel-driven activation, which is a nonequilibrium reaction. Finally, we found that self-assembly can play a large role in affecting the reaction's kinetics via feedback mechanisms. The interplay of the simultaneously operating reactions and feedback mechanisms can result in hysteresis effects in which the outcome of the competition for fuel depends on events that occurred in the past. In future work, we envision diversifying the library by modifying building blocks with catalytically active motifs and information-containing monomers.

Parasitic behavior in competing chemically fueled reaction cycles

Non-equilibrium, fuel-driven reaction cycles serve as model systems of the intricate reaction networks of life. Rich and dynamic behavior is observed when reaction cycles regulate assembly processes, such as phase separation. However, it remains unclear how the interplay between multiple reaction cycles affects the success of emergent assemblies. To tackle this question, we created a library of molecules that compete for a common fuel that transiently activates products. Often, the competition for fuel implies that a competitor decreases the lifetime of these products. However, in cases where the transient competitor product can phase-separate, such a competitor can increase the survival time of one product. Moreover, in the presence of oscillatory fueling, the same mechanism reduces variations in the product concentration while the concentration variations of the competitor product are enhanced. Like a parasite, the product benefits from the protection of the host against deactivation and increases its robustness against fuel variations at the expense of the robustness of the host. Such a parasitic behavior in multiple fuel-driven reaction cycles represents a lifelike trait, paving the way for the bottom-up design of synthetic life.

Disulfide Bridging Strategies in Viral and Nonviral Platforms for Nucleic Acid Delivery

Self-assembled nanostructures that are sensitive to environmental stimuli are promising nanomaterials for drug delivery. In this class, disulfide-containing redox-sensitive strategies have gained enormous attention because of their wide applicability and simplicity of nanoparticle design. In the context of nucleic acid delivery, numerous disulfide-based materials have been designed by relying on covalent or noncovalent interactions. In this review, we highlight major advances in the design of disulfide-containing materials for nucleic acid encapsulation, including covalent nucleic acid conjugates, viral vectors or virus-like particles, dendrimers, peptides, polymers, lipids, hydrogels, inorganic nanoparticles, and nucleic acid nanostructures. Our discussion will focus on the context of the design of materials and their impact on addressing the current shortcomings in the intracellular delivery of nucleic acids.

The Transient Covalent Bond in Abiotic Nonequilibrium Systems

Biochemical systems accomplish many critical functions with by operating out-of-equilibrium using the energy of chemical fuels. The formation of a transient covalent bond is a simple but very effective tool in designing analogous reaction networks. This Minireview focuses on the fuel chemistries that have been used to generate transient bonds in recent demonstrations of abiotic nonequilibrium systems (i.e., systems that do not make use of biological components). Fuel reactions are divided into two fundamental classifications depending on whether the fuel contributes structural elements to the activated state, a distinction that dictates how they can be used. Reported systems are further categorized by overall fuel reaction (e.g., hydrolysis of alkylating agents, carbodiimide hydration) and illustrate how similar chemistry can be used to effect a wide range of nonequilibrium behavior, ranging from self-assembly to the operation of molecular machines.