Thoughts on What Chemists Can Contribute to Fighting SARS-CoV-2 - A Short Note on Hand Sanitizers, Drug Candidates and Outreach

Hand Sanitizer Gels: Classification, Challenges, and the Future of Multipurpose Hand Hygiene Products

Hand hygiene is a crucial measure in the prevention and control of infections, and there is a growing awareness among individuals who are making a conscious effort to maintain hand cleanliness. With the advent of the SARS-CoV-2 outbreak, the demand for hand hygiene products has also gradually shifted towards those with antimicrobial properties. Among these products, hand sanitizer gels (HSGs) have gained considerable popularity as an efficient method of hand cleaning, due to their rapid drying and sustained antimicrobial efficacy. Concurrently, there has been a growing interest in novel HSGs that offer additional functions such as skin whitening, moisturizing, and anti-inflammatory effects. These novel HSGs effectively address concerns associated with the ingestion of antimicrobial ingredients and demonstrate reduced skin irritation, thereby alleviating hand dermatological issues. This review provides an extensive overview of the application scenarios, classification, and challenges associated with HSGs while emphasizing the emergence of novel components with biological functions, aiming to contribute to the advancement of hand hygiene practices and offer novel insights for the development of novel HSGs with outstanding antimicrobial properties with other multiple biological functions and desirable biosafety profiles.

Understanding and combating COVID-19 using the biology and chemistry of SARS-CoV-2

The coronavirus disease 2019 (COVID-19) is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Symptoms of COVID-19 can range from asymptomatic to severe, which could lead to fatality. Like other pathogenic viruses, the infection of SARS-CoV-2 relies on binding its spike glycoprotein to the host receptor angiotensin-converting enzyme 2 (ACE 2). Molecular studies suggested that there is a high affinity between the spike glycoprotein and ACE 2 that might arise due to their hydrophobic interaction. This property is mainly responsible for making this virus highly infectious. Apart from this, the transmissibility of the virus, prolonged viability in certain circumstances, and rapid mutations also contributed to the current pandemic situation. Nanotechnology provides potential alternative solutions to combat COVID-19 with the development of i. nanomaterial-based COVID-19 detection technology, ii. nanomaterial-based disinfectants, iii. nanoparticle-based vaccines, and iv. nanoparticle-based drug delivery. Hence, this review provides diverse insight into understanding COVID-19.

Re-imagining Priorities for Chemistry: A Central Science for "Freedom from Fear and Want"

Human security, defined as "freedom from want and fear and freedom to live in dignity", provides an overarching concept to address threats to human security dimensions such as health, food, economics, the environment and sustainable development, while placing the individual at the centre of attention. Chemistry is central to addressing these challenges, but surprisingly its role and contributions to human security have hitherto not been explicitly set out. This article situates chemistry in the human security framework, highlighting areas where chemistry knowledge, methods and products are vital. It underscores three complementary facets: 1) chemistry contributes to many dimensions of human security, but needs to do much more in the light of oncoming global challenges; 2) the human security framing illuminates areas where chemistry itself needs to adapt to contribute better, by intensification of current approaches and/or by building or strengthening chemistry tools, skills and competencies; and 3) repositioning as central to human security affords chemistry a powerful opportunity to refresh itself as a science for the benefit of society-and it will need to engage more directly and dynamically at the interface of science, society and policy in order to do so.

Assembly of Hexagonal Column Interpenetrated Spheres from Plant Polyphenol/Cationic Surfactants and Their Application as Antimicrobial Molecular Banks

Microbial infections has become a great threat to human health and one of the main risks arises from direct contact with the surfaces contaminated by pathogenic microbes. Developing long-lasting antimicrobial materials becomes an urgent need. Herein, a kind of hexagonal column interpenetrated spheres (HCISs) are fabricated by non-covalent assembly of plant gallic acid with quaternary ammonium surfactants. Different from one-time burst release of conventional antimicrobial agents, the HCIS acts like a "antimicrobial molecular bank" and releases the antimicrobial ingredients in a multistage way, leading to long-lasting antimicrobial performance. Taking advantage of strong hydrophobicity and adhesion, HCISs are applicable to various substrates and endowed with anti-water washing property, thus showing high in vitro antimicrobial efficiency ( > 99 %) even after being used for 10 cycles. Meanwhile, HCISs exhibit broad-spectrum antimicrobial activity against bacteria and fungi, and have good biocompatibility with mammalian cells. Such a low-cost and portable long-lasting antimicrobial agent meets the growing anti-infection demand in public spaces.

The role of disinfectants and sanitizers during COVID-19 pandemic: advantages and deleterious effects on humans and the environment

Disinfectants and sanitizers are essential preventive agents against the coronavirus disease 2019 (COVID-19) pandemic; however, the pandemic crisis was marred by undue hype, which led to the indiscriminate use of disinfectants and sanitizers. Despite demonstrating a beneficial role in the control and prevention of COVID-19, there are crucial concerns regarding the large-scale use of disinfectants and sanitizers, including the side effects on human and animal health along with harmful impacts exerted on the environment and ecological balance. This article discusses the roles of disinfectants and sanitizers in the control and prevention of the current pandemic and highlights updated disinfection techniques against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This article provides evidence of the deleterious effects of disinfectants and sanitizers exerted on humans, animals, and the environment as well as suggests mitigation strategies to reduce these effects. Additionally, potential technologies and approaches for the reduction of these effects and the development of safe, affordable, and effective disinfectants are discussed, particularly, eco-friendly technologies using nanotechnology and nanomedicine.

In silico molecular docking studies of oxadiazole and pyrimidine bearing heterocyclic compounds as potential antimicrobial agents

Microbial resistance is a major problem faced by the scientific community. It has created an urgent need to develop antimicrobial agents with novel structures and mechanisms of action. With this aim, a series of novel 1,3,4-oxadiazoles bearing 3,4-dihydropyrimidine heterocyclic motifs 4a-l were designed and synthesized. One-pot Biginelli synthesis is pivotal due to the use of readily available chemicals, shorter reaction time, and ecofriendly synthesis with a good yield. The structures of the synthesized molecules were characterized and confirmed by infrared, ¹ H nuclear magnetic resonance (NMR), ¹³ C NMR, and mass spectroscopic techniques. The title compounds were screened against Gram-positive and -negative strains of bacteria and fungi using the Mueller-Hinton broth method. Compound 4d was found to be the most promising against Escherichia coli (12.5 µg/ml), whereas the same compound showed good activity against Staphylococcus aureus at a concentration of 50 µg/ml. Other compounds of the same series, 4c and 4h, displayed moderate activity against Streptococcus pyogenes at a concentration of 50 µg/ml. Furthermore, results of the antifungal activity tests revealed that compound 4i showed promising activity against all the strains of fungi, Candida albicans, Aspergillus niger, and Aspergillus clavatus, at concentrations of 100, 50, and 100 µg/ml, respectively. Molecular docking also showed that these compounds had a significant binding affinity (Glide docking score: -7.74 to -6.531) for DNA gyrase, engaging in a series of bonded and nonbonded interactions with residues lining the active site. The results of molecular docking study validated the experimental findings, thereby providing an initiation mark to optimize this motif using a structure-based drug design approach.

Inactivating SARS-CoV-2 by electrochemical oxidation

Fully inactivating SARS-CoV-2, the virus causing coronavirus disease 2019, is of key importance for interrupting virus transmission but is currently performed by using biologically or environmentally hazardous disinfectants. Herein, we report an eco-friendly and efficient electrochemical strategy for inactivating the SARS-CoV-2 using in-situ formed nickel oxide hydroxide as anode catalyst and sodium carbonate as electrolyte. At a voltage of 5 V, the SARS-CoV-2 viruses can be rapidly inactivated with disinfection efficiency reaching 95% in only 30 s and 99.99% in 5 min. Mass spectrometry analysis and theoretical calculations indicate that the reactive oxygen species generated on the anode can oxidize the peptide chains and induce cleavage of the peptide backbone of the receptor binding domain of the SARS-CoV-2 spike glycoprotein, and thereby disables the virus. This strategy provides a sustainable and highly efficient approach for the disinfection of the SARS-CoV-2 viruliferous aerosols and wastewater.

Dual recognition element-controlled logic DNA circuit for COVID-19 detection based on exonuclease III and DNAzyme

Two fragments of the COVID-19 genome (specific and homologous) were used as two inputs to construct an AND logic gate for COVID-19 detection based on exonuclease III and DNAzyme. The detection sensitivity of the assay can reach fM levels. Satisfactory recovery values were obtained in real sample analysis.

Metabolomic/lipidomic profiling of COVID-19 and individual response to tocilizumab

The current pandemic emergence of novel coronavirus disease (COVID-19) poses a relevant threat to global health. SARS-CoV-2 infection is characterized by a wide range of clinical manifestations, ranging from absence of symptoms to severe forms that need intensive care treatment. Here, plasma-EDTA samples of 30 patients compared with age- and sex-matched controls were analyzed via untargeted nuclear magnetic resonance (NMR)-based metabolomics and lipidomics. With the same approach, the effect of tocilizumab administration was evaluated in a subset of patients. Despite the heterogeneity of the clinical symptoms, COVID-19 patients are characterized by common plasma metabolomic and lipidomic signatures (91.7% and 87.5% accuracy, respectively, when compared to controls). Tocilizumab treatment resulted in at least partial reversion of the metabolic alterations due to SARS-CoV-2 infection. In conclusion, NMR-based metabolomic and lipidomic profiling provides novel insights into the pathophysiological mechanism of human response to SARS-CoV-2 infection and to monitor treatment outcomes.

The current COVID-19 pandemic caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is markedly affecting the world population. Here we report about the small-molecule profile of patients hospitalized during the first wave of the COVID-19 pandemic in Florence (Italy). Using magnetic resonance spectroscopy, we showed that the infection induces profound changes in the metabolome. The analysis of the specific metabolite changes and correlations with clinical data enabled the identification of potential biochemical determinants of the disease fingerprint. We also followed how metabolic alterations revert towards those of the control group upon treatment with tocilizumab, a recombinant humanized monoclonal antibody against the interleukin-6 receptor. These results open up possibilities for the monitoring of novel patients and their individual response to treatment.

The effect of some antiseptic drugs on the energy transfer in chromatophore photosynthetic membranes of purple non-sulfur bacteria Rhodobacter sphaeroides

Chromatophores of purple non-sulfur bacteria (PNSB) are invaginations of the cytoplasmic membrane that contain a relatively simple system of light-harvesting protein-pigment complexes, a photosynthetic reaction center (RC), a cytochrome complex, and ATP synthase, which transform light energy into the energy of synthesized ATP. The high content of negatively charged phosphatidylglycerol (PG) and cardiolipin (CL) in PNSB chromatophore membranes makes these structures potential targets that bind cationic antiseptics. We used the methods of stationary and kinetic fluorescence spectroscopy to study the effect of some cationic antiseptics (chlorhexidine, picloxydine, miramistin, and octenidine at concentrations up to 100 μM) on the spectral and kinetic characteristics of the components of the photosynthetic apparatus of Rhodobacter sphaeroides chromatophores. Here we present the experimental data on the reduced efficiency of light energy conversion in the chromatophore membranes isolated from the photosynthetic bacterium Rb. sphaeroides in the presence of cationic antiseptics. The addition of antiseptics did not affect the energy transfer between the light-harvesting LH1 complex and reaction center (RC). However, it significantly reduced the efficiency of the interaction between the LH2 and LH1 complexes. The effect was maximal with 100 μM octenidine. It has been proved that molecules of cationic antiseptics, which apparently bind to the heads of negatively charged cardiolipin molecules located in the rings of light-harvesting pigments on the cytoplasmic surface of the chromatophores, can disturb the optimal conditions for efficient energy migration in chromatophore membranes.

Antiseptic drugs and disinfectants with special scrutiny of COVID-19 pandemic related side effects

This review covers publications during the period of January 2020 to December 2020 on adverse reactions to antiseptic drugs and disinfectants. Specific agents discussed are alcohols (ethanol, isopropanol), aldehydes (formaldehyde), guanidines (chlorhexidine, polyhexamethylene guanidine, and polyhexamethylene biguanidine), benzalkonium compounds, triclocarban, povidone-iodine, and sodium hypochlorite. No new data were identified for glutaraldehyde, cetrimide, ethylene oxide, tosylchloramide, triclosan, iodine, and phenolic compounds. The use of antiseptic drugs and disinfectants has been considerably increased during 2020 in a variety of medical and occupational settings, in commerce and gastronomy, as well as in the household, due to their antiviral properties against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during the Coronavirus Disease 2019 (COVID-19) pandemic. Exposure was additionally increased by widespread misinformation on social media for non-evidence based disinfectant use, even including ingestion or injection, as well as by questionable practices such as environmental spraying or disinfectant gates. Irritant effects on the respiratory system, skin and eyes were the most common adverse reaction, while the widespread and sometimes excessive use led to increased reports of poisonings, as well as cases of disinfectant adulteration including dilution into ineffective concentrations or addition of toxic agents such as methanol.

Monitoring the quality of ethanol-based hand sanitizers by low-cost near-infrared spectroscopy

The use of near-infrared spectroscopy (NIRS) based on a low-cost portable instrument for monitoring the quality of the three major formulations of ethanol-based hand sanitizers used for prevention against CoVID-19 disease is described. The quality of the sanitizers was evaluated using two approaches. In the first, a qualitative method was developed to identify gross non-conformities, using NIR spectral data compression by principal components analysis and projection of the spectrum of the tested sample in the principal component space delimited by samples of sanitizers prepared in the laboratory. In the second, a quantitative method was designed to determine the active substance (ethanol) employing multivariate regression based on partial least squares. The results demonstrate that the first approach can be used to detect non-conformities in the sanitizer composition, mostly associated with incorrect ethanol content. The second explores the use of NIRS for determination of the ethanol content in the three formulations aiming the quality control of the sanitizer manufacturing process. The ethanol content can be determined with an absolute root mean square error of prediction (RMSEP) equal to 0.68% (m/m), 0.83% (m/m) and 1.0% (v/v) for the three formulations evaluated. The RMSEP was estimated as 1.3% (m/m) for the commercial products. The measurement protocol takes approximately 1 min and requires only about 120 µL of a sample. Besides, NIRS was employed to compare the rate of volatilization of the ethanol in the different formulations, an important parameter concerning the efficacy of ethanol-based sanitizers.