Embedding Functional Biomacromolecules within Peptide-Directed Metal-Organic Framework (MOF) Nanoarchitectures Enables Activity Enhancement

Co-immobilization of a bi-enzymatic cascade into hierarchically porous MIL-53 for efficient 6'-sialyllactose production

6'-Sialyllactose (6'-SL), the most abundant sialylated human milk oligosaccharide, has attracted attention for its potential application in supplementary infant formulas. Herein, we report a facile strategy to construct a cascade bioreactor for the enzymatic synthesis of 6'-SL by co-immobilizing an enzymatic module consisting of CMP-sialic acid synthase and α-2,6-sialyltransferase into hierarchically porous MIL-53 (HP-MIL-53). The as-prepared HP-MIL-53 showed high enzyme immobilization capacity, reaching 226 mg g-1. Furthermore, the co-immobilized enzymes exhibited higher initial catalytic efficiency, and thermal, pH and storage stability than the free ones. Finally, the 6'-SL yield remained >80% after 13 cycles of use. We expect that HP-MIL-53 would have potential industrial applications in the enzymatic modular synthesis of 6'-SL and other glycans.

Thermo-Switchable Enzyme@Metal-Organic Framework for Selective Biocatalysis and Biosensing

The stimulus-responsive regulation of enzyme catalytic activity and selectivity provides a new opportunity to extend the functionality and efficiency of immobilized enzymes. This work aims to design and synthesize a thermo-switchable enzyme@MOF for size-selective biocatalysis and biosensing through the immobilization of Candida rugosa lipase (CRL) within ZIF-8 functionalized with thermally responsive polymer, poly(N-isopropylacrylamide) (PNIPAM) (CRL@ZIF-8-PNIPAM). Unlike free CRL, which does not demonstrate substrate selectivity, we can reversibly tune the pore size of the ZIF-8-PNIPAM nanostructures (open pores or blocked pores) through temperature stimulus and subsequently modulate the substrate selectivity of CRL@ZIF-8-PNIPAM. CRL@ZIF-8-PNIPAM had the highest hydrolytic activity for small molecules (12 mM p-nitrophenol/mg protein/min, 4-nitrophenyl butyrate (p-NP Be)) and the lowest hydrolytic activity for large molecules (0.16 mM p-nitrophenol/mg protein/min, 4-nitrophenyl palmitate (p-NP P)). In addition, CRL@ZIF-8-PNIPAM demonstrated thermo-switchable behavior for large molecules (p-NP P). The p-NP P hydrolytic activity of CRL@ZIF-8-PNIPAM was significantly lower at 40 °C (blocked pores) than at 27 °C (open pores). However, the transition of blocked pores and open pores is a gradual process that resulted in a delay in the "thermo-switchable" catalytic behavior of CRL@ZIF-8-PNIPAM during thermal cycling. CRL@ZIF-8-PNIPAM was also successfully used for the fabrication of electrochemical biosensors for the selective biosensing of pesticides with different molecular sizes.

Confinement-Induced Biocatalytic Activity Enhancement of Light- and Thermoresponsive Polymer@Enzyme@MOF Composites

Metal-organic frameworks (MOFs) are favorable hosting materials for fixing enzymes to construct enzyme@MOF composites and to expand the applications of biocatalysts. However, the rigid structure of MOFs without tunable hollow voids and a confinement effect often limits their catalytic activities. Taking advantage of the smart soft polymers to overcome the limitation, herein, a protection protocol to encapsulate the enzyme in zeolitic imidazolate framework-8 (ZIF-8) was developed using a glutathione-sensitive liposome (L) as a soft template. Glucose oxidase (GOx) and horseradish peroxidase (HRP) were first anchored on a light- and thermoresponsive porous poly(styrene-maleic anhydride-N,N-dimethylaminoethyl methacrylate-spiropyran) membrane (PSMDSP) to produce PSMDSP@GOx-HRP, which could provide a confinement effect by switching the UV irradiation or varying the temperature. Afterward, embedding PSMDSP@GOx-HRP in L and encapsulating PSMDSP@GOx-HRP@L into hollow ZIF-8 (HZIF-8) to form PSMDSP@GOx-HRP@HZIF-8 composites were performed, which proceeded during the crystallization of the framework following the removal of L by adding glutathione. Impressively, the biocatalytic activity of the composites was 4.45-fold higher than that of the free enzyme under UV irradiation at 47 °C, which could benefit from the confinement effect of PSMDSP and the conformational freedom of the enzyme in HZIF-8. The proposed composites contributed to the protection of the enzyme against harsh conditions and exhibited superior stability. Furthermore, a colorimetric assay based on the composites for the detection of serum glucose was established with a linearity range of 0.05-5.0 mM, and the calculated LOD value was 0.001 mM in a cascade reaction system. This work provides a universal design idea and a versatile technique to immobilize enzymes on soft polymer membranes that can be encapsulated in porous rigid MOF-hosts. It also holds potential for the development of smart polymer@enzyme@HMOFs biocatalysts with a tunable confinement effect and high catalytic performance.

A Self-Cascade Oxygen-Generating Nanomedicine for Multimodal Tumor Therapy

Natural and artificial enzyme oxygen-generating systems for photodynamic therapy (PDT) are developed for tumor treatment, yet they have fallen short of the desired efficacy. Moreover, both the enzymes and photosensitizers usually need carriers for efficient delivery to tumor sites. Here, a self-cascade-enhanced multimodal tumor therapy is developed by ingeniously integrating self-cascade-enhanced PDT with Zn2+-overloading therapy. Manganese-porphyrin (TCPP-Mn) is chosen both as the photosensitizer and catalase (CAT) mimic, which can be encapsulated within glucose oxidase (GOx). Acid-responsive zeolitic imidazolate framework-8 (ZIF-8) is applied as the carrier for TCPP-Mn@GOx (T@G), attaining TCPP-Mn@GOx@ZIF-8 (T@G@Z). T@G@Z demonstrates robust anti-tumor ability as follows: upon the structural degradation of ZIF-8, GOx can mediate the oxidation of glucose and generate hydrogen peroxide (H2O2); TCPP-Mn can catalyze H2O2 into O2 for self-cascade-enhanced PDT; meanwhile, the released Zn2+ can enhance oxidative stress and induce mitochondrial dysfunction by destroying mitochondrial membrane potential; furthermore, immunotherapy can be activated to resist primary tumor and tumor metastasis. The self-cascade-enhanced T@G@Z exhibited its potential application for further tumor management.

A Synergetic Pore Compartmentalization and Hydrophobization Strategy for Synchronously Boosting the Stability and Activity of Enzyme

Spatial immobilization of fragile enzymes using a nanocarrier is an efficient means to design heterogeneous biocatalysts, presenting superior stability and recyclability to pristine enzymes. An immobilized enzyme, however, usually compromises its catalytic activity because of inevasible mass transfer issues and the unfavorable conformation changes in a confined environment. Here, we describe a synergetic metal-organic framework pore-engineering strategy to trap lipase (an important hydrolase), which confers lipase-boosted stability and activity simultaneously. The hierarchically porous NU-1003, featuring interconnected mesopore and micropore channels, is precisely modified by chain-adjustable fatty acids on its mesopore channel, into which lipase is trapped. The interconnected pore structure ensures efficient communication between trapped lipase and exterior media, while the fatty acid-mediated hydrophobic pore can activate the opening conformation of lipase by interfacial interaction. Such dual pore compartmentalization and hydrophobization activation effects render the catalytic center of trapped lipase highly accessible, resulting in 1.57-fold and 2.46-fold activities as native lipase on ester hydrolysis and enantioselective catalysis. In addition, the feasibility of these heterogeneous biocatalysts for kinetic resolution of enantiomer is also validated, showing much higher efficiency than native lipase.

Calcium-based MOFs as scaffolds for shielding immobilized lipase and enhancing its stability

The enzyme immobilization technology has become a key tool in the field of enzyme applications; however, improving the activity recovery and stability of the immobilized enzymes is still challenging. Herein, we employed a magnetic carboxymethyl cellulose (MCMC) nanocomposite modified with ionic liquids (ILs) for covalent immobilization of lipase, and used Ca-based metal-organic frameworks (MOFs) as the support skeleton and protective layer for immobilized enzymes. The ILs contained long side chains (eight CH2 units), which not only enhanced the hydrophobicity of the carrier and its hydrophobic interaction with the enzymes, but also provided a certain buffering effect when the enzyme molecules were subjected to compression. Compared to free lipase, the obtained CaBPDC@PPL-IL-MCMC exhibited higher specific activity and enhanced stability. In addition, the biocatalyst could be easily separated using a magnetic field, which is beneficial for its reusability. After 10 cycles, the residual activity of CaBPDC@PPL-IL-MCMC could reach up to 86.9%. These features highlight the good application prospects of the present immobilization method.

A Multienzyme Cascade Pathway Immobilized in a Hydrogen-Bonded Organic Framework for the Conversion of CO2

The reduction of carbon dioxide to valuable chemicals through enzymatic processes is regarded as a promising approach for the reduction of carbon dioxide emissions. In this study, an in vitro multi-enzyme cascade pathway is constructed for the conversion of CO2 into dihydroxyacetone (DHA). This pathway, known as FFFP, comprises formate dehydrogenase (FDH), formaldehyde dehydrogenase (FaldDH), formolase (FLS), and phosphite dehydrogenase (PTDH), with PTDH serving as the critical catalyst for regenerating the coenzyme NADH. Subsequently, the immobilization of the FFFP pathway within the hydrogen-bonded organic framework (HOF-101) is accomplished in situ. A 1.8-fold increase in DHA yield is observed in FFFP@HOF-101 compared to the free FFFP pathway. This enhancement can be explained by the fact that within FFFP@HOF-101, enzymes are positioned sufficiently close to one another, leading to the elevation of the local concentration of intermediates and an improvement in mass transfer efficiency. Moreover, FFFP@HOF-101 displays a high degree of stability. In addition to the establishment of an effective DHA production method, innovative concepts for the tailored synthesis of fine compounds from CO2 through the utilization of various multi-enzyme cascade developments are generated by this work.

Boosting Enzyme Activity in Enzyme Metal-Organic Framework Composites

Enzymes, as highly efficient biocatalysts, excel in catalyzing diverse reactions with exceptional activity and selective properties under mild conditions. Nonetheless, their broad applications are hindered by their inherent fragility, including low thermal stability, limited pH tolerance, and sensitivity to organic solvents and denaturants. Encapsulating enzymes within metal-organic frameworks (MOFs) can protect them from denaturation in these harsh environments. However, this often leads to a compromised enzyme activity. In recent years, extensive research efforts have been dedicated to enhancing enzymatic activity within MOFs, leading to the development of new enzyme-MOF composites that not only preserve their catalytic potential but also outperform their free counterparts. This Review provides a comprehensive review on recent developments in enzyme-MOF composites with a specific emphasis on their enhanced enzymatic activity compared to free enzymes.

DNA-Directed Assembly of Hierarchical MOF-Cellulose Nanofiber Microbioreactors with "Branch-Fruit" Structures

Assembling metal-organic frameworks (MOFs) into ordered multidimensional porous superstructures promises the encapsulation of enzymes for heterogeneous biocatalysts. However, the full potential of this approach has been limited by the poor stability of enzymes and the uncontrolled assembly of MOF nanoparticles onto suitable supports. In this study, a novel and exceptionally robust Ni-imidazole-based MOF was synthesized in water at room temperature, enabling in situ enzyme encapsulation. Based on this MOF platform, we developed a DNA-directed assembly strategy to achieve the uniform placement of MOF nanoparticles onto bacterial cellulose nanofibers, resulting in a distinctive "branch-fruit" structure. The resulting hybrid materials demonstrated remarkable versatility across various catalytic systems, accommodating natural enzymes, nanoenzymes, and multienzyme cascades, thus showcasing enormous potential as universal microbioreactors. Furthermore, the hierarchical composites facilitated rapid diffusion of the bulky substrate while maintaining the enzyme stability, with ∼3.5-fold higher relative activity compared to the traditional enzyme@MOF immobilized in bacterial cellulose nanofibers.

Dispersive hierarchically porous composites based on defective MOFs as mixed-mode stationary phases for chromatographic separation

Defective metal-organic frameworks-based composites with excellent separation properties were obtained. The mesoporous metal-organic frameworks were selected and deliberately designed to be deficient, and they were then combined with polyacrylamide to be modified on the surface of silica microspheres. The prepared composites were employed as mixed-mode stationary phase in chromatographic separation, and they were compared to both conventional microporous metal-organic framework-based columns and commercial columns. It showed improved selectivity and retention toward both hydrophilic and hydrophobic analytes, allowing for the effective separation of nine nucleosides and nucleobases, eight alkaloids, six antibiotics, and five alkylbenzenes. Additionally, the column was used to effectively separate the active ingredients in the daring substance of honeysuckle, revealing a wide range of possible applications. For the same batch of analytes, three batches of distinct materials demonstrated consistent separation effects. It also demonstrated excellent chromatographic repeatability and stability, with relative standard deviations of the retention time and/or column efficiency being found to be less than 0.8% and 0.9%, respectively. The dispersive hierarchically porous composites were demonstrated to be effective in chromatographic separation, and the results expanded the potential uses of defective MOFs with dispersed multi-level pores.

Hollow Hierarchical Porous and Antihydrolytic Spherical Zeolitic Imidazolate Frameworks for Enzyme Encapsulation and Biocatalysis

The creation of a new metal-organic framework (MOF) with a hollow hierarchical porous structure has gained significant attention in the realm of enzyme immobilization. The present work employed a novel, facile, and effective combinatorial technique to synthesize modified MOF (N-PVP/HZIF-8) with a hierarchically porous core-shell structure, allowing for the preservation of the structural integrity of the encapsulated enzyme molecules. Scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, confocal laser scanning microscopy, and other characterization tools were used to fully explore the changes of morphological structure and surface properties in different stages of the preparation of immobilization enzyme CRL-N-PVP/HZIF-8, thus showing the superiority of N-PVP/HZIF-8 as an enzyme immobilization platform and the logic of the immobilization process on the carrier. Additionally, the maximum enzyme loading was 216.3 mg mL-1, the relative activity of CRL-N-PVP/HZIF-8 increased by 15 times compared with the CRL@ZIF-8 immobilized in situ, and exhibited quite good thermal, chemical, and operational stability. With a maximal conversion of 88.8%, CRL-N-PVP/HZIF-8 demonstrated good catalytic performance in the biosynthesis of phytosterol esters as a proof of concept. It is anticipated that this work will offer fresh concepts from several perspectives for the creation of MOF-based immobilized enzymes for biotechnological uses.

Metal-pyrimidine nanocubes immobilized enzymes with pH-switchable multienzyme-like activity for broad-pH-responsive sensing assay for organophosphorus pesticides

Peroxidase (POD)-like can only function in acidic environments and the pH mismatch restricts the application of enzyme-nanozyme cascade catalytic sensing platforms in the broad-pH-responsive assay for organophosphorus pesticides (OPs). Herein, the metal-pyrimidine nanocubes (MPNCs) with intrinsic pH-switchable POD-like and catalase (CAT)-like properties were synthesized via the coordination of pyrimidin-2-ol with Cu2+. Meanwhile, acetylcholinesterase (AChE) and choline oxidase (CHO) were simultaneously encapsulated in MPNCs to construct an enzyme-nanozyme cascade catalytic platform (AChE/CHO@MPNCs). AChE/CHO@MPNCs could catalyze the hydrolysis of acetylcholine to choline, which was subsequently converted to H2O2. The POD-like activity of MPNCs was dominant under acidic conditions, while the CAT-like activity prevailed under neutral and alkaline conditions, which could catalyze H2O2 to •OH and O2, respectively, then oxidizing dopamine (DA) to polydopamine quantum dots (PDA QDs) with different fluorescence characteristics. Consequently, OPs could be detected in a linear range from 0.05 to 1000 nM with a LOD of 0.015 nM in acidic environments and a linear range from 0.05 to 500 nM with a LOD of 0.023 nM in alkaline environments. Overall, our work expands the horizon of constructing enzyme@MOFs composites with high catalytic activity. Meanwhile, the intrinsic pH-switchable multienzyme-like property opens avenues to construct sensing platforms with broad-pH-responsive for OPs and other analytes detection.

Dual Stimulus-Responsive Enzyme@Metal-Organic Framework-Polymer Composites toward Enhanced Catalytic Performance for Visual Detection of Glucose

Enzyme immobilization on a metal-organic framework (enzyme@MOF) has been proven to be a promising strategy for boosting catalysis and biosensing applications. However, promoting the catalytic performance of polymer-modified enzyme@MOF composites remains an ongoing challenge. Herein, a protocol for enzyme immobilization was designed by using a smart polymer-modified MOF (UiO-66-NH2, UN) as the support. Through in situ polymerization, the dual stimulus-responsive poly(N-2-dimethylamino ethyl methacrylate) (PDM) was prepared. The PDM as a "soft cage" protected the immobilized glucose oxidase (GOx)-horseradish peroxidase (HRP) on the surface of the rigid UN. The confinement effect was generated by varying the temperature and pH, thereby improving the catalytic activity of the GOx-HRP@UN-PDM composites. In comparison with free enzymes, the fabricated composites exhibited an 8.9-fold enhancement in catalytic performance (Vmax) at pH 5.0 and 49 °C. Furthermore, relying on a cascade reaction generated in the composites, an assay was developed for the visual detection of glucose in rat serum. This study introduces a groundbreaking approach for the construction of smart enzyme@MOF-polymer composites with high catalytic activity for sensitive monitoring of biomolecules.

Encapsulation of lipase in zeolitic imidazolate framework-8 induced by polyethyleneimine to form a honeycomb structure with enhanced activity

Embedding an enzyme in the metal-organic frameworks (MOFs) gives good protection to the fragile enzyme. However, this may also restrain the enzyme activity because of the decreased substrate accessibility. Encapsulation of lipase AK from Pseudomonas fluorescens for preparing the enzyme-MOF composite (AK@ZIF-8-PEI) was performed through a new strategy based on polyethyleneimine and enzyme induced in-situ growth of zeolitic imidazolate framework-8 (ZIF-8). Characterizations indicate that AK@ZIF-8-PEI has a honeycomb structure and the hierarchical porosity formed during the preparation, which provides adequate mass transfer channels for catalytic applications. Activity evaluation shows that specific activity of AK@ZIF-8-PEI is 8-fold than the commercial lipase powder. AK@ZIF-8-PEI is demonstrated as an efficient catalyst in kinetic resolution of α-naphthol enantiomers through enantioselective transesterification. Within 12 h, the conversion and substrate enantiomeric excess (ees) reaches 49.8 % and 96.4 %, achieving an improved resolution than previous researches.

Structural and Functional Insights into the Biomineralized Zeolite Imidazole Frameworks

Biomineralization is a natural process of mineral formation mediated by biomacromolecules, allowing access to hierarchical structures integrating biological, chemical, and material properties. In this contribution, we comprehensively investigate the biomineralization of zeolite imidazole frameworks (ZIFs) for one-step synthesis of an enzyme-MOF biocomposite, in terms of differential crystallization behaviors, fine microstructure of resultant ZIF biominerals, the enzyme's conformation evolution, and protective effect of ZIF mineral. We discover that the biomineralization ability is ZIF organic linker dependent and the biocatalytic function is highly related to the ZIF mineral species and their distinguishable topologies and defect structures. Importantly, a side-by-side analysis suggests that the protective effect of ZIF mineral toward the hosted enzyme is highly associated with the synergistic effect of size dimension and chemical microenvironment of the ZIF pores. This work provides important insight into the ZIF-dependent biomineralization behaviors and highlights the important role of the ZIF microstructure in its biocatalytic activity and durability, which has been underestimated previously.

Biomimetic Metal-Pyrimidine Nanoflowers: Enzyme Immobilization Platforms with Boosted Activity

For the enzyme immobilization platform, enhancing enzyme activity retention while improving enzyme stability remains a challenge for sensitive sensing analysis. Herein, an in situ biomimetic immobilized enzyme carrier (metal-pyrimidine nanoflowers, MPNFs) synthesized by the coordination of DNA base derivative (2-aminopyrimidine) with Zn2+ in the aqueous phase at room temperature is developed. The biocompatibility of 2-aminopyrimidine and the hydrophilicity and green synthetic conditions of MPNFs allows the immobilized enzymes to retain above 91.2% catalytic activity. On this basis, a cascade catalytic platform is constructed by simultaneously immobilizing acetylcholinesterase (AChE), choline oxidase (CHO), and horseradish peroxidase (HRP) in MPNFs (AChE/CHO/HRP@MPNFs) for organophosphorus pesticides (OPs) colorimetric biosensing detection. The assay could specifically detect parathion-methyl within 13 min with a wider linear range (0.1-1000.0 nm) and a lower limit of detection (LOD) (0.032 nm). The remarkable stability of the immobilized enzymes is also achieved under harsh environments, room temperature storage, and recycling. Furthermore, a portable and cost-effective biosensing platform is developed by integrating AChE/CHO/HRP@MPNFs with a smartphone-assisted paper device for the on-site detection of OPs. Overall, the high catalytic activity retention and the enhanced detection performance demonstrate that MPNF is a robust carrier in enzyme immobilization and holds great promise in biosensing and other field applications.

Novel biocatalysts based on enzymes in complexes with nano- and micromaterials

In today's world, there is a wide array of materials engineered at the nano- and microscale, with numerous applications attributed to these innovations. This review aims to provide a concise overview of how nano- and micromaterials are utilized for enzyme immobilization. Enzymes act as eco-friendly biocatalysts extensively used in various industries and medicine. However, their widespread adoption faces challenges due to factors such as enzyme instability under different conditions, resulting in reduced effectiveness, high costs, and limited reusability. To address these issues, researchers have explored immobilization techniques using nano- and microscale materials as a potential solution. Such techniques offer the promise of enhancing enzyme stability against varying temperatures, solvents, pH levels, pollutants, and impurities. Consequently, enzyme immobilization remains a subject of great interest within both the scientific community and the industrial sector. As of now, the primary goal of enzyme immobilization is not solely limited to enabling reusability and stability. It has been demonstrated as a powerful tool to enhance various enzyme properties and improve biocatalyst performance and characteristics. The integration of nano- and microscale materials into biomedical devices is seamless, given the similarity in size to most biological systems. Common materials employed in developing these nanotechnology products include synthetic polymers, carbon-based nanomaterials, magnetic micro- and nanoparticles, metal and metal oxide nanoparticles, metal-organic frameworks, nano-sized mesoporous hydrogen-bonded organic frameworks, protein-based nano-delivery systems, lipid-based nano- and micromaterials, and polysaccharide-based nanoparticles.

Peroxidase-encapsulated Zn/Co-zeolite imidazole framework nanosheets on ZnCoO nanowire array for detecting H2O2 derived from mitochondrial superoxide anion

In this work, we have developed a nanocomposite consisting of horseradish peroxidase (HRP)-encapsulated 2D Zn-Co zeolite imidazole framework (ZIF) nanosheets strung on a ZnCoO nanowire array on a Ti support (denoted as 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti). This nanocomposite was then applied to constructing an electrochemical biosensor for detecting H2O2 derived from O2∙- released by mitochondria in living cells. This sensing platform shows excellent catalytic performance towards H2O2, attributable to the enzyme/metal-catalytic effect of HRP and Zn/Co-ZIF. The unique nano-string structure alleviates the aggregation of Zn/Co-ZIF nanosheets, readily exposes the catalytic active sites, protects the bioactivity of HRP, and reduces the charge/mass transfer pathway within Zn/Co-ZIF. The 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti biosensor offers two linear ranges of 0.2-10 μ M and 10-1100 μ M, a limit of detection of 0.082 μ M, a sensitivity of 3.3 mA mM-1 cm-2, good selectivity and stability over 40 days for H2O2 detection. After treating with specific mitochondrial complex inhibitors, the chronoamperometric results at the 2D-Zn/Co-ZIF(HRP)|ZnCoO|Ti confirmed complex I and III within the mitochondria electron transfer chain as the main electron leakage sites. This biosensor may contribute to the development of diagnostic health-care devices that shed light on the precaution and even treatment of oxidative stress diseases.

Designs of metal-organic framework nanoparticles for protein delivery

Recently, there has been high interest in developing metal-organic framework (MOF) nanoparticles (NPs) for delivering therapeutic proteins, propelled mainly by the unique hierarchical porous structures of MOFs for protein encapsulation. Novel design strategies have emerged for broad therapeutic applications and clinical translations, leading to multifunctional MOF-NPs with improved biointerfacing capabilities and higher potency. This review summarizes recent MOF-NP designs specifically for protein delivery. The summary focuses on four design categories, including environment-responsive MOF-NPs for on-demand protein delivery, cell membrane-coated MOF-NPs for biomimetic protein delivery, cascade reaction-incorporated MOF-NPs for combinatorial protein delivery, and composite MOF-NPs for intelligent protein delivery. The major challenges and opportunities in using MOF-NPs for protein delivery are also discussed. Overall, this review will promote designs of MOF-NPs with unique properties to address unmet medical needs.

Construction of metal-organic framework-based multienzyme system for L-tert-leucine production

Chiral compounds are important drug intermediates that play a critical role in human life. Herein, we report a facile method to prepare multi-enzyme nano-devices with high catalytic activity and stability. The self-assemble molecular binders SpyCatcher and SpyTag were fused with leucine dehydrogenase and glucose dehydrogenase to produce sc-LeuDH (SpyCatcher-fused leucine dehydrogenase) and GDH-st (SpyTag-fused glucose dehydrogenase), respectively. After assembling, the cross-linked enzymes LeuDH-GDH were formed. The crosslinking enzyme has good pH stability and temperature stability. The coenzyme cycle constant of LeuDH-GDH was always higher than that of free double enzymes. The yield of L-tert-leucine synthesis by LeuDH-GDH was 0.47 times higher than that by free LeuDH and GDH. To further improve the enzyme performance, the cross-linked LeuDH-GDH was immobilized on zeolite imidazolate framework-8 (ZIF-8) via bionic mineralization, forming LeuDH-GDH @ZIF-8. The created co-immobilized enzymes showed even better pH stability and temperature stability than the cross-linked enzymes, and LeuDH-GDH@ZIF-8 retains 70% relative conversion rate in the first four reuses. In addition, the yield of LeuDH-GDH@ZIF-8 was 0.62 times higher than that of LeuDH-GDH, and 1.38 times higher than that of free double enzyme system. This work provides a novel method for developing multi-enzyme nano-device, and the ease of operation of this method is appealing for the construction of other multi-enzymes @MOF systems for the applications in the kinds of complex environment.

Enhancing Enzyme Activity Using Hydrophilic Hollow Layered Double Hydroxides as Encapsulation Carriers

Enzyme immobilization enables the fabrication of flexible and powerful biocatalytic systems that can meet the needs of green and efficient development in various fields. However, restricted electron and mass transfer during enzymatic reactions and disruption of the enzyme structure during encapsulation limit the wide application of the immobilized enzyme systems. Herein, we report an encapsulation strategy based on hollow-shell-layered double hydroxides (LDHs; ZnCo-LDH) for green and nondestructive enzyme immobilization. Benefiting from the protective and enzyme-friendly microenvironment provided by the hydrophilic hollow structure of ZnCo-LDH, the encapsulated enzyme maintains a nearly natural enzyme biostructure and enhanced stability. Notably, mesoporous ZnCo-LDH with excellent electrical properties considerably facilitates electron and mass transport during enzymatic reactions, exhibiting 5.56 times the catalytic efficiency of free enzymes or traditional enzyme encapsulation systems. The current study broadens the family of encapsulated carriers and alleviates the trade-off between enzyme stability and catalytic activity in the encapsulated state, presenting a promising avenue for the industrial application of the enzyme.

Green synthesis of stable hybrid biocatalyst using a hydrogen-bonded, π-π-stacking supramolecular assembly for electrochemical immunosensor

Rational integration of native enzymes and nanoscaffold is an efficient means to access robust biocatalyst, yet remains on-going challenges due to the trade-off between fragile enzymes and harsh assembling conditions. Here, we report a supramolecular strategy enabling the in situ fusion of fragile enzymes into a robust porous crystal. A c2-symmetric pyrene tecton with four formic acid arms is utilized as the building block to engineer this hybrid biocatalyst. The decorated formic acid arms afford the pyrene tectons high dispersibility in minute amount of organic solvent, and permit the hydrogen-bonded linkage of discrete pyrene tectons to an extended supramolecular network around an enzyme in almost organic solvent-free aqueous solution. This hybrid biocatalyst is covered by long-range ordered pore channels, which can serve as the gating to sieve the catalytic substrate and thus enhance the biocatalytic selectivity. Given the structural integration, a supramolecular biocatalyst-based electrochemical immunosensor is developed, enabling the pg/mL detection of cancer biomarker.

Immobilization of Alpha Acetolactate Decarboxylase in Hybrid Gelatin/Alginate Support for Application to Reduce Diacetyl Off-Flavor in Beer

Beer production is the largest among alcoholic beverages. Its production process is complex and demands several steps. Lager beers commonly present an off-flavor of butter that is due to the presence of diacetyl, and to avoid such a problem, a long period of maturation (3–5 weeks) is required. Another way is the application of (α-acetolactate decarboxylase) ALDC to accelerate the process. The objectives of the present work were to develop a low-cost support using gelatin, a residue from capsules from the nutraceutical industry, to immobilize the ALDC enzyme. For this, the yield, efficiency and activity recovered, and the stability of free and immobilized enzymes at different temperatures and pH were evaluated. To evaluate the capacity of immobilized enzymes when applied directly to beer and their operational stability, three concentrations of glutaraldehyde (1%, 2.5% and 5%) were tested in distilled water as a cross-linking agent. The best results obtained were 95.6%, 27.0% and 23.6%, respectively, for yield, efficiency and activity recovery. Immobilization provided a high activity over a wide pH range. The immobilized enzyme showed greater stability at temperatures of 50 and 60 °C. The immobilized derivative showed adequate reuse capacity, and its dehydrated form had excellent activity after long periods of storage.

Mesoporous Polymeric Ionic Liquid via Confined Polymerization for Laccase Immobilization towards Efficient Degradation of Phenolic Pollutants

Laccase immobilization is a promising method that can be used for the recyclable treatment of refractory phenolic pollutants (e.g., chlorophenols) under mild conditions, but the method is still hindered by the trade-off limits of supports in terms of their high specific surface area and rich functional groups. Herein, confined polymerization was applied to create abundant amino-functionalized polymeric ionic liquids (PILs) featuring a highly specific surface area and mesoporous structure for chemically immobilizing laccase. Benefiting from this strategy, the specific surface area of the as-synthesized PILs was significantly increased by 60-fold, from 5 to 302 m2/g. Further, a maximum activity recovery of 82% towards laccase was recorded. The tolerance and circulation of the immobilized laccase under harsh operating conditions were significantly improved, and the immobilized laccase retained more than 84% of its initial activity after 15 days. After 10 cycles, the immobilized laccase was still able to maintain 80% of its activity. Compared with the free laccase, the immobilized laccase exhibited enhanced stability in the biodegradation of 2,4-dichlorophenol (2,4-DCP), recording around 80% (seven cycles) efficiency. It is proposed that the synergistic effect between PILs and laccase plays an important role in the enhancement of stability and activity in phenolic pollutant degradation. This work provides a strategy for the development of synthetic methods for PILs and the improvement of immobilized laccase stability.

Seed-mediated strategy for synthesis of enzyme-encapsulated metal-organic frameworks with enhanced enzyme activity

Encapsulation of enzymes into metal-organic frameworks (enzyme@MOF) can improve the stability of enzymes. Most present synthesis methods of enzyme@MOF rely on the complex modification of enzymes or the natural negative surface charge of enzymes to promote the synthesis of enzyme@MOF. Despite extensive efforts, it remains challenging to develop a surface charge-independent and convenient strategy to encapsulate various enzymes into MOF efficiently. In this study, we proposed a convenient seed-mediated strategy for efficient synthesis of enzyme@MOF from the perspective of MOF formation. The seed, acting as nuclei, makes the slow nucleation stage skipped, leading to the efficient synthesis of enzyme@MOF. The successful encapsulation of several proteins demonstrated the feasibility and advantages of the seed-mediated strategy. Moreover, the resulting composite, cytochrome (Cyt c) encapsulated in ZIF-8, exhibited a 5.6-fold increase in bioactivity compared to free Cyt c. The seed-mediated strategy provides an efficient, enzyme surface charge-independent, and non-modified method for the synthesis of enzyme@MOF biomaterials, which warrants further exploration and application in diverse fields.

Quasi-Cu-MOFs: highly improved water stability and electrocatalytic activity toward H2O2 reduction among pristine 3D MOFs

QHKUST-1 calcined at 250 °C for 1 h maintains the perfect octahedral morphology of HKUST-1 and exhibits superior moisture stability and enhanced electrocatalytic activity compared to the original water-sensitive HKUST-1.

Tryptophan-Modulated Nanoscale Metal-Organic Framework for Coordinated Loading of Biomolecules for Cascade Production of Reactive Oxygen and Nitrogen Species

Owing to the high surface area and porosity, metal-organic frameworks (MOFs) could be utilized as both nanocarriers of biopharmaceuticals and nanoreactors to organize cascade biological reactions with great potential in cancer treatment. However, nanoscale MOFs suitable for biomedical applications rely on harsh preparation conditions. Here, we utilized tryptophan to modulate the morphology and optical properties of zeolitic imidazolate framework-8 (ZIF-8) as nanocarrier to efficiently encapsulate the enzyme and mRNA. Under room temperature in an aqueous solution, tryptophan would coordinate with zinc ions to form ZIF-8:Trp with a decreased size from the μm range to sub-200 nm. In addition, cargo release could be monitored in real time via fluorescence red-shift effects. Besides being used as nanocarriers of biomolecules, ZIF-8:Trp could also be utilized as nanoreactors to induce cascade reactions to produce reactive oxygen and nitrogen species. Overall, this nanosized ZIF-8:Trp could provide a new strategy for preparation of cascade bioreactions and provide new insight for gas therapy.

Hierarchically Structured CA@ZIF-8 Biohybrids for Carbon Dioxide Mineralization

Carbonic anhydrase (CA) is a powerful biocatalyst for carbon dioxide (CO₂) mineralization, of which immobilization is usually used for maintaining its catalytic activity against harsh external stimuli. However, the incorporated materials for CA immobilization would commonly increase the internal diffusion resistance during the catalytic process, thereby decreasing the catalytic efficiency. In our study, poly-L-glutamic acid (PLGA) as the structure regulator was used to induce the synthesis of CA@zeolitic imidazolate framework-8 (CA@ZIF-8) biohybrids. The introduction of PLGA that could coordinate with Zn²⁺ interfered the crystallization of ZIF-8, thereby changing the morphological structure of CA@ZIF-8 biohybrids. With the increase of PLGA amount from 0 to 60 mg, PLGA(x)-CA@ZIF-8 biohybrids were gradually transformed from a dodecahedron structure to a 3D lamellar nano-flower structure, which caused elevated exposed surface area. Accordingly, the loading ratio was increased from 34.6 to 49.8 mg g_cat^-1, while the catalytic activity was elevated from 20.6 to 23.4%. The CO₂ conversion rate was enhanced by nearly two folds compared to PLGA(0)-CA@ZIF-8 under the optimized condition. The final CaCO₃ yield could reach 5.6 mg mg_cat^-1, whereas the reaction system could remain above 80% of the initial reaction activity after 8 cycles.

Flexible Aggregation-Induced Emission-Active Hydrogel for On-Site Monitoring of Pesticide Degradation

Benefiting from the stimuli-responsive property and powerful loading capacity, functionalized hydrogels are favorable for the fabrication of sensing devices. Herein, we design aggregation-induced emission (AIE)-active hydrogel discs by embedding gold nanoclusters@zeolite-like imidazole framework (AuNCs@ZIF) composites in double-network hydrogels to build a sensitive pesticide biosensor. The hydrogel discs integrate an AIE effect of AuNCs, a stimuli-responsive property of ZIF, and a porous network structure of the hydrogel, which enhances the sensing sensitivity via boosting the stable fluorescent signal and antifouling performance. In conjunction with a homemade device, the fluorescence images of hydrogel discs could be transduced into data information for accurate quantification of chlorpyrifos pesticide with a detection limit of 0.2 ng/mL. The dynamic degradation of chlorpyrifos in Chinese cabbage is demonstrated to confirm the practical application of hydrogel discs. Such AIE-active hydrogel discs could be a plant health sensor for the on-site quantification of pesticide residues on crops, holding great promise for precision agriculture.

Supramolecular Combination Cancer Therapy Based on Macrocyclic Supramolecular Materials

Supramolecular combination therapy adopts supramolecular materials to design intelligent drug delivery systems with different strategies for cancer treatments. Thereinto, macrocyclic supramolecular materials play a crucial role in encapsulating anticancer drugs to improve anticancer efficiency and decrease toxicity towards normal tissue by host-guest interaction. In general, chemotherapy is still common therapy for solid tumors in clinics. However, supramolecular combination therapy can overcome the limitations of the traditional single-drug chemotherapy in the laboratory findings. In this review, we summarized the combination chemotherapy, photothermal chemotherapy, and gene chemotherapy based on macrocyclic supramolecular materials. Finally, the application prospects in supramolecular combination therapy are discussed.

Enzymes-Encapsulated Defective Metal-Organic Framework Hydrogel Coupling with a Smartphone for a Portable Glucose Biosensor

Enzymes featuring high catalytic efficiency and selectivity have been widely used as the sensing element in analytical chemistry. However, the structural fragility and poor machinability of an enzyme significantly limit its practicability in biosensors. Herein, we develop a robust and sensitive hybrid biosensor by means of co-encapsulating enzymes into a defective metal-organic framework (MOF), followed by a double-crosslinked alginate gelatinization. The defective MOF encapsulation can enhance the stability of enzymes, yet well preserve their biocatalytic function, while the alginate gelatinization allows the MOF biohybrid high stretchability and mechanical strength, which facilitates the integration of a bead-, fiber-, and sheet-like portable biosensor. In this work, the enzymes consisting of glucose oxidase and peroxidase are co-encapsulated into this MOF hydrogel, and it can efficiently convert glucose into a blue-violet product through the biocatalytic cascade of encapsulated enzymes, enabling the colorimetric biosensing of glucose on a miniaturized MOF hydrogel when coupling with a smartphone. Interestingly, this MOF biohybrid hydrogel outputs a stronger sensing signal than the free biohybrid powders, attributed to the catalytic product-accumulated effect of the highly hydrophilic microenvironment of the hydrogel. As a result, this portable biosensor can sensitively and selectively sense glucose with a linear range from 0.05 to 4 mM. Importantly, both the hydrophilic hydrogel and MOF "armor" endow enzymes with high durability, and its sensing activity was well-maintained even after placing the biosensor at room temperature for 30 d. We believe that this MOF biohybrid hydrogel has huge potential for the engineering of next-generation portable biosensors.

Photodynamic Hydrogen-Bonded Biohybrid Framework: A Photobiocatalytic Cascade Nanoreactor for Accelerating Diabetic Wound Therapy

A diabetic wound causes thousands of infections or deaths around the world each year, and its healing remains a critical challenge because of the ease of multidrug-resistant (MDR) bacterial infection, as well as the intrinsic hyperglycemic and hypoxia microenvironment that inhibits the therapeutic efficiency. Herein, we pioneer the design of a photobiocatalytic cascade nanoreactor via spatially organizing the biocatalysts and photocatalysts utilizing a hydrogen-bonded organic framework (HOF) scaffold for diabetic wound therapy. The HOF scaffold enables it to disperse and stabilize the host cargos, and the formed long-range-ordered mesochannels also facilitate the mass transfer that enhances the cascade activity. This integrated HOF nanoreactor allows the continuous conversion of overexpressed glucose and H₂O₂ into toxic reactive oxygen species by the photobiocatalytic cascade. As a result, it readily reverses the microenvironment of the diabetes wound and exhibits an extraordinary capacity for wound healing through synergistic photodynamic therapy. This work describes the first example of constructing an all-in-one HOF bioreactor for antimicrobial diabetes wound treatment and showcases the promise of combined biocatalysis and photocatalysis achieved by using an HOF scaffold in biomedicine applications.

Hydrogen-bonded organic framework biomimetic entrapment allowing non-native biocatalytic activity in enzyme

Nature programs the structural folding of an enzyme that allows its on-demand biofunctionality; however, it is still a long-standing challenge to manually modulate an enzyme’s conformation. Here, we design an exogenous hydrogen-bonded organic framework to modulate the conformation of cytochrome c, and hence allow non-native bioactivity for the enzyme. The rigid hydrogen-bonded organic framework, with net-arranged carboxylate inner cage, is in situ installed onto the native cytochrome c. The resultant hydrogen-bonded nano-biointerface changes the conformation to a previously not achieved catalase-like species within the reported cytochrome c-porous organic framework systems. In addition, the preserved hydrogen-bonded organic framework can stabilize the encapsulated enzyme and its channel-like pores also guarantee the free entrance of catalytic substrates. This work describes a conceptual nanotechnology for manoeuvring the flexible conformations of an enzyme, and also highlights the advantages of artificial hydrogen-bonded scaffolds to modulate enzyme activity.

Heme units are immobilised in diverse heme enzymes for oxidation, and have been immobilised also in hydrogen-bonded organic frameworks. Here, the authors show the use of hydrogen-bonded organic framework to modulate the enzyme’s conformation and show different biofunction from the original.

Confining enzymes in porous organic frameworks: from synthetic strategy and characterization to healthcare applications

Enzymes are a class of natural catalysts with high efficiency, specificity, and selectivity unmatched by their synthetic counterparts and dictate a myriad of reactions that constitute various cascades in living cells. The development of suitable supports is significant for the immobilization of structurally flexible enzymes, enabling biomimetic transformation in the extracellular environment. Accordingly, porous organic frameworks, including metal organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), have emerged as ideal supports for the immobilization of enzymes because of their structural features including ultrahigh surface area, tailorable porosity, and versatile framework compositions. Specially, organic framework-encased enzymes have shown significant enhancement in stability and reusability, and their tailorable pore opening provides a gatekeeper-like effect for guest sieving, which is beneficial for mimicking intracellular biocatalysis processes. This immobilization technique brings new insight into the development of next-generation enzyme materials and shows huge potential in healthcare applications, such as biomarker diagnosis, biostorage, and cancer and antibacterial therapies. In this review, we describe the state-of-the-art strategies for the structural immobilization of enzymes using the well-explored MOFs and burgeoning COFs and HOFs as scaffolds, with special emphasis on how these porous framework-confined technologies can provide a favorable microenvironment for mimicking natural biocatalysis. Subsequently, advanced characterization techniques for enzyme conformation, the effect of the confined microenvironment on the activity of enzymes, and the emerging healthcare applications will be surveyed.

Fabricating Bimetal Organic Material Capsules with a Commodious Microenvironment and Synergistic Effect for Glycosyltransferase

Metal-organic frameworks (MOFs) are rarely applied as solid supports in the enzymatic synthesis of oligosaccharides and polysaccharides, as glycosyltransferases are readily inactivated by traditional MOFs due to the poor compatibility and the limited mass transfer for complex carbohydrates in MOFs. Here, on the basis of the synthetic methods of zeolitic imidazolate framework-90 (ZIF-90), we prepared bimetal organic material (BMOM) microreactors that successfully encapsulated Pasteurella multocida heparosan synthase 2 (PmHS2), a critical glycosyltransferase in the enzymatic synthesis of heparin and heparan sulfate. The second metal ion introduced can increase the mesopores in the BMOM, stabilize the active pocket of glycosyltransferase, and facilitate the deprotonation of critical amino acid residues, Asp and Glu of PmHS2, to initiate the catalyzation. On the basis of this bimetallic microreactor, heparosan disaccharide, oligosaccharide, and polysaccharide are successfully prepared in quantitative yield, providing a viable BMOM-based immobilization strategy to simulate the physiological microenvironment for glycosyltransferase.

Near-Infrared-II Plasmonic Trienzyme-Integrated Metal-Organic Frameworks with High-Efficiency Enzyme Cascades for Synergistic Trimodal Oncotherapy

Natural enzyme-based catalytic cascades hold great promise for cancer therapy, but their clinical utility is greatly hindered by the loss of their functions during in vivo delivery. Herein, a plasmonic trienzyme-integrated metal-organic framework (plasEnMOF) nanoplatform with high-efficiency enzyme cascades is reported for synergistic starvation, chemodynamic, and plasmonic hyperthermia trimodal therapy of hypoxic tumors. These plasEnMOFs are created with encapsulation of near-infrared-II (NIR-II) plasmonic Au nanorods and natural enzymes-catalase (CAT), glucose oxidase (GOx), and horseradish peroxidase (HRP) within zeolitic imidazolate framework-8 (ZIF-8) MOFs. As a trienzyme cascade system, the plasEnMOFs effectively deplete intratumoral glucose and generate toxic reactive oxygen species (ROS) for starvation therapy and chemodynamic therapy (CDT) combined with the plasmonic hyperthermia therapy (PHT). The enhanced glucose consumption and ROS generation by the NIR-II plasmonic photothermal effect are also demonstrated. The improved chemo- and thermotolerance of the encapsulated natural enzymes within the protective ZIF-8 MOFs are evidenced. With the integrated enzyme cascades and NIR-II photothermal effects, these plasEnMOFs are demonstrated with exceptional therapeutic effects on 4T1 xenograft tumors through the combined starvation/CDT/PHT therapy. This work highlights the superiority of natural enzyme cascade systems integrated in plasmonic MOFs for high-efficiency enzymatic cancer therapy.

Metal Azolate Coordination Polymer-Enabled High Payload and Non-Destructive Enzyme Immobilization for Biocatalysis and Biosensing

The biomineralized metal-organic frameworks (MOFs) as protective layers help enhance the robustness of enzymes for biocatalysis. Despite great efforts, it is still challenging to develop a recyclable system with high payload and tolerance to harsh conditions. Here, we report a facile surface charge-independent strategy based on Zn-based coordination polymer (ZnCP) for nondestructive immobilization of enzyme. The ZnCP outcompetes most of the previously reported MOFs, in terms of high-payload enzyme packaging. Moreover, benefiting from the hydrophilicity of ZnCP, the entrapped enzymes (e.g., positive cytochrome C and negative glucose oxidase) maintained high catalytic activity, resembling their native counterparts. Notably, compared with ZIF-8, such enzyme-incorporated ZnCP (enzyme@ZnCP) is more tolerant to acidic pH, which imparts the enzyme with good recyclability, even in acid species-generated catalytic reactions, thus broadening its application in biocatalysis. The feasibility of enzyme@ZnCP for protein packaging, enzyme cascade catalysis, and biosensing was also validated. Altogether, enzyme@ZnCP demonstrates high enzyme payload, operational stability, and preservation of enzymatic activity, affording a versatile platform to accommodate bioactive enzyme for biocatalysis and biosensing.

Self-assembled multiprotein nanostructures with enhanced stability and signal amplification capability for sensitive fluorogenic immunoassays

Fundamentally improving the sensing sensitivity of immunoassay remains a huge challenge, which limited further critical applications. Herein we designed a new immunoprobe by integrating biometric unit (antibody) and signal amplification element (enzyme) to form urease-antibody-CaHPO₄ hybrid nanoflower (UAhNF) via the biomineralization process. The dual-functional UAhNF enhances the stability of urease in NaCl (10 mmol L^-1) and high temperature (60 °C), and also maintains the ability of antibody recognition, fitting greatly well with the need for immunosensor. Using imidacloprid as a model target, the fixed coating antigens are competed with imidacloprid to capture primary antibodies, and the secondary antibody of UAhNF was linked to construct the competitive-type fluorogenic immunoassays. An in-situ etching process of copper nanoparticles initiated by urease is integrated with UAhNF-based immune response for further improving the detection sensitivity. The proposed immunosensor possessed a 50% inhibition concentration value of 0.72 ng mL^-1, which is 30-fold lower than conventional enzyme-linked immunosorbent assay. This presented approach provided a versatile sensing tool by varying building blocks, making it practically functional for a variety of bioassay applications.

Ultrathin graphdiyne nanosheets confining Cu quantum dots as robust electrocatalyst for biosensing featuring remarkably enhanced activity and stability

There is an urgent need for developing electrochemical biosensor based on the acetylcholinesterase (AChE) inhibition to real-time analysis of organophosphorus pesticides (OPs), but it is suffered from the sluggish electrode kinetics and high oxidation potential toward signal species. Herein, a nanocomposite of ultrafine Cu quantum dots (QD) uniformly loaded on three-dimensional ultrathin graphdiyne (GDY) nanosheets (denoted as Cu@GDY) was synthesized via a one-step strategy, which showing high-density of active sites with persistent stability. Then an AChE biosensor based on Cu@GDY was fabricated to detect OPs, and the results revealed that the Cu@GDY nanocomposite can significantly amplifies electrochemical signal and reduces the oxidation potential for OPs. The strong interaction between active site of Cu@GDY and thiocholine signal species caused rapid analyte aggregation and decreased the reaction activation energy of thiocholine electro-oxidation. Benefiting from the excellent catalytic activity of Cu@GDY nanocomposite and reasonable regulation of enzyme inhibition kinetics, the biosensor achieved rapid and sensitive detection of OPs with a detection limit of 1 μg L^-1 for paraoxon. Furthermore, the biosensor demonstrated great reproducibility, good stability and high recovery rate for OPs detection in real samples. Cu@GDY based sensor also displayed high catalytic activities and good selectivity to the non-enzymatic detection of glucose in alkaline medium. Cu@GDY offers a versatile and promising platform for sensors and biosensors featuring remarkably enhanced activity and stability, and can be applied to many other fields as desirable electrocatalyst.

Biocatalytic Metal-Organic Framework: Promising Materials for Biosensing

The high-efficient and specific catalysis of enzyme allow it to recognize a myriad of substrate that impels the biosensing. Nevertheless, the fragility of natural enzymes severely restricts their practical applications. Metal-organic frameworks (MOFs) with porous network and attractive functions have been intelligently employed as supports to encase enzymes for protecting them against hash environments. More importantly, the customizable construction and composition affords the intrinsic enzyme-like activity of some MOFs (known as nanozymes), which provides an alternative guideline to construct robust enzymes mimics. Herein, this review will introduce the concept of these biocatalytic MOFs, with the special emphasis on how the biocatalytic processes operated in these MOFs materials can reverse the plight of native enzymes-based biosensing. In addition, the present challenges and future outlooks in this research field are briefly put forward.

Recent Advances in Nanozymes for Bacteria-Infected Wound Therapy

Bacterial-infected wounds are a serious threat to public health. Bacterial invasion can easily delay the wound healing process and even cause more serious damage. Therefore, effective new methods or drugs are needed to treat wounds. Nanozyme is an artificial enzyme that mimics the activity of a natural enzyme, and a substitute for natural enzymes by mimicking the coordination environment of the catalytic site. Due to the numerous excellent properties of nanozymes, the generation of drug-resistant bacteria can be avoided while treating bacterial infection wounds by catalyzing the sterilization mechanism of generating reactive oxygen species (ROS). Notably, there are still some defects in the nanozyme antibacterial agents, and the design direction is to realize the multifunctionalization and intelligence of a single system. In this review, we first discuss the pathophysiology of bacteria infected wound healing, the formation of bacterial infection wounds, and the strategies for treating bacterially infected wounds. In addition, the antibacterial advantages and mechanism of nanozymes for bacteria-infected wounds are also described. Importantly, a series of nanomaterials based on nanozyme synthesis for the treatment of infected wounds are emphasized. Finally, the challenges and prospects of nanozymes for treating bacterial infection wounds are proposed for future research in this field.

Hierarchically mesoporous Ce-based MOFs with enhanced alkaline phosphatase-like activity for phosphorylated biomarker sensing

We developed a hierarchically mesoporous metal–organic framework nanozyme with enhanced alkaline phosphatase-mimicking activity for rapid and sensitive sensing of phosphorylated biomarkers.

ZIF-8 with cationic defects toward efficient 125I2 uptake for in vitro radiotherapy of colon cancer

Introducing 2,3-dimethyl-1H-imidazol-3-ium iodide (Dmim) as a monodentate ligand during the preparation of ZIF-8 yields ZIF-8+(50) and ZIF-8+(38) with cationic ‘missing linker’ defects. ZIF-8+(38) adsorbs 125I2 and the resulting radioactive host-guest...

Programmable Logic in Metal-Organic Frameworks for Catalysis

Metal-organic frameworks (MOFs) have emerged as one of the most widely investigated materials in catalysis mainly due to their excellent component tunability, high surface area, adjustable pore size, and uniform active sites. However, the overwhelming number of MOF materials and complex structures has brought difficulties for researchers to select and construct suitable MOF-based catalysts. Herein, a programmable design strategy is presented based on metal ions/clusters, organic ligands, modifiers, functional materials, and post-treatment modules, which can be used to design the components, structures, and morphologies of MOF catalysts for different reactions. By establishing the corresponding relationship between these modules and functions, researchers can accurately and efficiently construct heterometallic MOFs, chiral MOFs, conductive MOFs, hierarchically porous MOFs, defective MOFs, MOF composites, and MOF-derivative catalysts. Further, this programmable design approach can also be used to regulate the physical/chemical microenvironments of pristine MOFs, MOF composites, and MOF-derivative materials for heterogeneous catalysis, electrocatalysis, and photocatalysis. Finally, the challenging issues and opportunities for the future research of MOF-based catalysts are discussed. Overall, the modular design concept of this review can be applied as a potent tool for exploring the structure-activity relationships and accelerating the on-demand design of multicomponent catalysts.