Metal–Organic Layers Leading to Atomically Thin Bismuthene for Efficient Carbon Dioxide Electroreduction to Liquid Fuel

Insights into Electrochemical CO2 Reduction on Metallic and Oxidized Tin Using Grand-Canonical DFT and In Situ ATR-SEIRA Spectroscopy

Electrochemical CO2 reduction (CO2R) to formate is an attractive carbon emissions mitigation strategy due to the existing market and attractive price for formic acid. Tin is an effective electrocatalyst for CO2R to formate, but the underlying reaction mechanism and whether the active phase of tin is metallic or oxidized during reduction is openly debated. In this report, we used grand-canonical density functional theory and attenuated total reflection surface-enhanced infrared absorption spectroscopy to identify differences in the vibrational signatures of surface species during CO2R on fully metallic and oxidized tin surfaces. Our results show that CO2R is feasible on both metallic and oxidized tin. We propose that the key difference between each surface termination is that CO2R catalyzed by metallic tin surfaces is limited by the electrochemical activation of CO2, whereas CO2R catalyzed by oxidized tin surfaces is limited by the slow reductive desorption of formate. While the exact degree of oxidation of tin surfaces during CO2R is unlikely to be either fully metallic or fully oxidized, this study highlights the limiting behavior of these two surfaces and lays out the key features of each that our results predict will promote rapid CO2R catalysis. Additionally, we highlight the power of integrating high-fidelity quantum mechanical modeling and spectroscopic measurements to elucidate intricate electrocatalytic reaction pathways.

Dual-Anion Regulation for Reversible and Energetic Aqueous Zn-CO2 Batteries

Aqueous Zn-CO2 batteries can not only convert CO2 into high-value chemicals but also store/output electric energy for external use. However, their performance is limited by sluggish and complicated CO2 electroreduction at the cathode. Herein, a dual-anion regulated Bi electrocatalyst is developed to selectively reduce CO2 to formate with a Faradaic efficiency of up to 97% at a large current density of 250 mA cm-2. With O and/or F, the rate-determine step of CO2 electroreduction has been manipulated (from the first hydrogenation to *HCOOH desorption step) with a reduced energy barrier. Significantly, the fabricated Zn-CO2 battery exhibits a high discharge voltage of 1.2 V, optimal power density of 4.51 mW cm-2, remarkable energy density of 802 Wh kg-1, and energy-conversion efficiency of 70.74%, stability up to 200 cycles and 68 h. This study provides possible strategies to fabricate reversible and energetic aqueous Zn-CO2 batteries by addressing cathodic problems.

Chlamydomonas reinhardtii chloroplast factory construction for formate bioconversion

The photosynthetic autotrophic production of microalgae is limited by the effective supply of carbon and light energy, and the production efficiency is lower than the theoretical value. Represented by methanol, C1 compounds have been industrially produced by artificial photosynthesis with a solar energy efficiency over 10%, but the complexity of artificial products is weak. Here, based on a construction of chloroplast factory, green microalgae Chlamydomonas reinhardtii CC137c was modified for the bioconversion of formate for biomass production. By screening the optimal combination of chloroplast transport peptides, the cabII-1 cTP1 fusion formate dehydrogenase showed significant enhancement on the conversion of formate with a better performance in the maintenance of light reaction activity. This work provided a new way to obtain bioproducts from solar energy and CO2 with potentially higher-than-nature efficiency by the artificial-natural hybrid photosynthesis.

Semimetallic Bismuthene with Edge-Rich Dangling Bonds: Broad-Spectrum-Driven and Edge-Confined Electron Enhancement Boosting CO2 Hydrogenation Reduction

Broad-spectrum-driven high-performance artificial photosynthesis is quite challenging. Herein, atomically ultrathin bismuthene with semimetallic properties is designed and demonstrated for broad-spectrum (ultraviolet-visible-near infrared light) (UV-vis-NIR)-driven photocatalytic CO2 hydrogenation. The trap states in the bandgap produced by edge dangling bonds prolong the lifetime of the photogenerated electrons from 90 ps in bulk Bi to 1650 ps in bismuthine, and excited-state electrons are enriched at the edge of bismuthine. The edge dangling bonds of bismuthene as the active sites for adsorption/activation of CO2 increase the hybridization ability of the Bi 6p orbital and O 2p orbital to significantly reduce the catalytic reaction energy barrier and promote the formation of C─H bonds until the generation of CH4. Under λ ≥ 400 nm and λ ≥ 550 nm irradiation, the utilization ratios of photogenerated electron reduction CO2 hydrogenation to CO and CH4 for bismuthene are 58.24 and 300.50 times higher than those of bulk Bi, respectively. Moreover, bismuthene can extend the CO2 hydrogenation reaction to the near-infrared region (λ ≥ 700 nm). This pioneering work employs the single semimetal element as an artificial photosynthetic catalyst to produce a broad spectral response.

Engineering a solar formic acid/pentose (SFAP) pathway in Escherichia coli for lactic acid production

Microbial CO2 fixation into lactic acid (LA) is an important approach for low-carbon biomanufacturing. Engineering microbes to utilize CO2 and sugar as co-substrates can create efficient pathways through input of moderate reducing power to drive CO2 fixation into product. However, to achieve complete conservation of organic carbon, how to engineer the CO2-fixing modules compatible with native central metabolism and merge the processes for improving bioproduction of LA is a big challenge. In this study, we designed and constructed a solar formic acid/pentose (SFAP) pathway in Escherichia coli, which enabled CO2 fixation merging into sugar catabolism to produce LA. In the SFAP pathway, adequate reducing equivalents from formate oxidation drive glucose metabolism shifting from glycolysis to the pentose phosphate pathway. The Rubisco-based CO2 fixation and sequential reduction of C3 intermediates are conducted to produce LA stoichiometrically. CO2 fixation theoretically can bring a 20% increase of LA production compared with sole glucose feedstock. This SFAP pathway in the integration of photoelectrochemical cell and an engineered Escherichia coli opens an efficient way for fixing CO2 into value-added bioproducts.

Local CO2 reservoir layer promotes rapid and selective electrochemical CO2 reduction

Electrochemical CO2 reduction reaction in aqueous electrolytes is a promising route to produce added-value chemicals and decrease carbon emissions. However, even in Gas-Diffusion Electrode devices, low aqueous CO2 solubility limits catalysis rate and selectivity. Here, we demonstrate that when assembled over a heterogeneous electrocatalyst, a film of nitrile-modified Metal-Organic Framework (MOF) acts as a remarkable CO2-solvation layer that increases its local concentration by ~27-fold compared to bulk electrolyte, reaching 0.82 M. When mounted on a Bi catalyst in a Gas Diffusion Electrode, the MOF drastically improves CO2-to-HCOOH conversion, reaching above 90% selectivity and partial HCOOH currents of 166 mA/cm2 (at -0.9 V vs RHE). The MOF also facilitates catalysis through stabilization of reaction intermediates, as identified by operando infrared spectroscopy and Density Functional Theory. Hence, the presented strategy provides new molecular means to enhance heterogeneous electrochemical CO2 reduction reaction, leading it closer to the requirements for practical implementation.

Synergistic Effects of Doping and Strain in Bismuth Catalysts for CO2 Electroreduction

Doping is a recognized method for enhancing catalytic performance. The introduction of strains is a common consequence of doping, although it is often overlooked. Differentiating the impact of doping and strain on catalytic performance poses a significant challenge. In this study, Cu-doped Bi catalysts with substantial tensile strain are synthesized. The synergistic effects of doping and strain in bismuth result in a remarkable CO2RR performance. Under optimized conditions, Cu1/6-Bi demonstrates exceptional formate Faradaic efficiency (>95%) and maintains over 90% across a wide potential window of 900 mV. Furthermore, it delivers an industrial-relevant partial current density of -317 mA cm-2 at -1.2 VRHE in a flow cell, while maintaining its selectivity. Additionally, it exhibits exceptional long-term stability, surpassing 120 h at -200 mA cm-2. Through experimental and theoretical mechanistic investigations, it has been determined that the introduction of tensile strain facilitates the adsorption of *CO2, thereby enhancing the reaction kinetics. Moreover, the presence of Cu dopants and tensile strain further diminishes the energy barrier for the formation of *OCHO intermediate. This study not only offers valuable insights for the development of effective catalysts for CO2RR through doping, but also establishes correlations between doping, lattice strains, and catalytic properties of bismuth catalysts.

Concentrated Formic Acid from CO2 Electrolysis for Directly Driving Fuel Cell

The production of formic acid via electrochemical CO2 reduction may serve as a key link for the carbon cycle in the formic acid economy, yet its practical feasibility is largely limited by the quantity and concentration of the product. Here we demonstrate continuous electrochemical CO2 reduction for formic acid production at 2 M at an industrial-level current densities (i.e., 200 mA cm-2 ) for 300 h on membrane electrode assembly using scalable lattice-distorted bismuth catalysts. The optimized catalysts also enable a Faradaic efficiency for formate of 94.2 % and a highest partial formate current density of 1.16 A cm-2 , reaching a production rate of 21.7 mmol cm-2  h-1 . To assess the practicality of this system, we perform a comprehensive techno-economic analysis and life cycle assessment, showing that our approach can potentially substitute conventional methyl formate hydrolysis for industrial formic acid production. Furthermore, the resultant formic acid serves as direct fuel for air-breathing formic acid fuel cells, boasting a power density of 55 mW cm-2 and an exceptional thermal efficiency of 20.1 %.

Electrochemical Conversion of CO2 into Formate Boosted by In Situ Reconstruction of Bi-MOF to Bi2O2CO3 Ultrathin Nanosheets

Substantial emissions of CO2 have presented formidable challenges for global climate dynamics. Electrochemical reduction of CO2 to produce formic acid (HCOOH) is considered to be a promising approach for achieving carbon neutrality. Nevertheless, the development of a catalyst exhibiting both high catalytic activity and selectivity toward desired products remains an arduous task. Herein, we report the synthesis of a unique porous bismuth-based MOF (Bi-BTC) through microwave-assisted agitation. The Bi-BTC MOF has a good catalytic performance in electrochemical CO2RR to formate products. At -0.9 V (vs RHE) potential, the Faradaic efficiency of formate can reach 96%, and the current density of the CO2RR is 25 mA/cm2. Bi-BTC also exhibits good electrochemical stability. FEformate and current density were maintained for 24 h with almost no attenuation. It was found that Bi-BTC was reconstructed in the CO2RR process. The shape of nanocolumn before electrolysis is transformed into an ultrathin nanosheet. The soft and hard acid-base theory (HSAB) proves that the reason for the reconfiguration is that the hard base ions (HCO3-) and the intermediate acid (Bi3+) break in the Bi-O bond in Bi-MOF, resulting in the transition of the original column structure of Bi-BTC to Bi2O2CO3 ultrathin nanosheeets. The DFT calculation shows that the restructured Bi2O2CO3 nanosheet exposes a crystal surface structure, which is conducive to lower the activation energy barrier of the electrochemical CO2RR intermediate *OCHO and stabilizing the reaction intermediate. Therefore, it is more beneficial to improve the selectivity of the electrochemical CO2RR to formate formation. This result proves that irreversible reconfiguration of catalyst is beneficial to electrochemical CO2RR. In addition, coupling a Bi-BTC cathode with a stable anode (IrO2) enables battery-driven high-activity CO2RR and an OER with good activity and efficiency.

Distinctive p-d Orbital Hybridization in CuSb Porous Nanonetworks for Enhanced Nitrite Electroreduction to Ammonia

Electrochemical nitrite reduction reaction (NO 2 - RR ${\mathrm{NO}}_{\mathrm{2}}^{\mathrm{ - }}{\mathrm{RR}}$ ), as a green and sustainable ammonia synthesis technology, has broad application prospects and environmental friendliness. Herein, an unconventional p-d orbital hybridization strategy is reported to realize the fabrication of defect-rich CuSb porous nanonetwork (CuSb PNs) electrocatalyst forNO 2 - RR ${\mathrm{NO}}_{\mathrm{2}}^ - {\mathrm{RR}}$ . The crystalline/amorphous heterophase structure is cleverly introduced into the porous nanonetworks, and this defect-rich structure exposes more atoms and activated boundaries. CuSb PNs exhibit a large NH3 yield (r N H 3 ${{r}_{{\mathrm{N}}{{{\mathrm{H}}}_{\mathrm{3}}}}}$ ) of 946.1 µg h-1m cat - 1 ${\mathrm{m}}_{{\mathrm{cat}}}^{ - {\mathrm{1}}}$ and a high faradaic efficiency (FE) of 90.7%. Experimental and theoretical studies indicate that the excellent performance of CuSb PNs results from the defect-rich porous nanonetworks structure and the p-d hybridization of Cu and Sb elements. This work describes a powerful pathway for the fabrication of p-d orbital hybrid defect-rich porous nanonetworks catalysts, and provides hope for solving the problem of nitrogen oxide pollution in the field of environment and energy.

Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

Coupling Electrochemical Sulfion Oxidation with CO2 Reduction over Highly Dispersed p-Bi Nanosheets and CO2 -Assisted Sulfur Extraction

We report herein an electrocatalytic CO2 reduction-coupled sulfion oxidation system for the co-productions of valuable formate and sulfur at much enhanced atom utilization. Specifically, an organic ligand-assisted two-step reconstruction approach has been developed to fabricate the highly dispersed p-Bi nanosheets (p-Bi NSs) for cathodic CO2 reduction reaction (CO2 RR), and meanwhile porous Co-S nanosheets (Co-S NSs) was applied for anodic sulfion oxidation reaction (SOR). Significantly high Faradaic Efficiencies of about 90 % for formate production by CO2 RR in a wide potential range from -0.6 V to -1.1 V, and excellent SOR performances including an ultra-low onset potential of about 0.2 V and recycle capacity of S2- in the 0.1 M and 0.5 M S2- solutions, have been simultaneously achieved. In the meantime, both the structure transformation of the catalysts and the reaction pathways are explored and discussed in detail. A two-electrode CO2 RR||SOR electrolyzer equipped with above electrocatalysts has been established, which features as low as about 1.5 V to run the electrolyzer at 100 mA cm-2 , manifesting extremely lowered electricity consumption in comparison to conventional CO2 RR system. Moreover, a sulfur separation approach has been proposed by using CO2 , which is efficient, environmentally friendly and cost effective with value-added NaHCO3 be obtained as the byproduct.

Carbon Catalysts Empowering Sustainable Chemical Synthesis via Electrochemical CO2 Conversion and Two-Electron Oxygen Reduction Reaction

Carbon materials hold significant promise in electrocatalysis, particularly in electrochemical CO2 reduction reaction (eCO2 RR) and two-electron oxygen reduction reaction (2e- ORR). The pivotal factor in achieving exceptional overall catalytic performance in carbon catalysts is the strategic design of specific active sites and nanostructures. This work presents a comprehensive overview of recent developments in carbon electrocatalysts for eCO2 RR and 2e- ORR. The creation of active sites through single/dual heteroatom doping, functional group decoration, topological defect, and micro-nano structuring, along with their synergistic effects, is thoroughly examined. Elaboration on the catalytic mechanisms and structure-activity relationships of these active sites is provided. In addition to directly serving as electrocatalysts, this review explores the role of carbon matrix as a support in finely adjusting the reactivity of single-atom molecular catalysts. Finally, the work addresses the challenges and prospects associated with designing and fabricating carbon electrocatalysts, providing valuable insights into the future trajectory of this dynamic field.

Graphene quantum dot-mediated anchoring of highly dispersed bismuth nanoparticles on porous graphene for enhanced electrocatalytic CO2 reduction to formate

The electrocatalytic reduction of CO2 to produce formic acid is gaining prominence as a critical technology in the pursuit of carbon neutrality. Nonetheless, it remains challenging to attain both substantial formic acid production and high stability across a wide voltage range, particularly when utilizing bismuth-based catalysts. Herein, we present a novel graphene quantum dot-mediated synthetic strategy to achieve the uniform deposition of highly dispersed bismuth nanoparticles on porous graphene. This innovative design achieves an elevated faradaic efficiency for formate of 87.0% at -1.11 V vs. RHE with high current density and long-term stability. When employing a flow cell, a maximum FEformate of 80.0% was attained with a total current density of 156.5 mA cm-2. The exceptional catalytic properties can be primarily attributed to the use of porous graphene as the support and the auxiliary contribution of graphene quantum dots, which enhance the dispersion of bismuth nanoparticles. This improved dispersion, in turn, has a significantly positive impact on CO2 activation and the generation of *HCOO intermediates to facilitate the formation of formate. This work presents a straightforward technique to create uniform metal nanoparticles on carbon materials for advancing various electrolytic applications.

Strong p-d Orbital Hybridization on Bismuth Nanosheets for High Performing CO2 Electroreduction

Single-atom alloys (SAAs) show great potential for a variety of electrocatalytic reactions. However, the atomic orbital hybridization effect of SAAs on the electrochemical reactions is unclear yet. Herein, the in situ confinement of vanadium/molybdenum/tungsten atoms on bismuth nanosheet is shown to create SAAs with rich grain boundaries, respectively. With the detailed analysis of microstructure and composition, the strong p-d orbital hybridization between bismuth and vanadium enables the exceptional electrocatalytic performance for carbon dioxide (CO2 ) reduction with the Faradaic efficiency nearly 100% for C1 products in a wide potential range from -0.6 to -1.4 V, and a long-term electrolysis stability for 90 h. In-depth in situ investigations with theoretical computations reveal that the electron delocalization toward vanadium atoms via the p-d orbital hybridization evokes the bismuth active centers for efficient CO2 activation via the σ-donation of O-to-Bi, thus reduces protonation energy barriers for formate production. With such fundamental understanding, SAA electrocatalyst is employed to fabricated the solar-driven electrolytic cell of CO2 reduction and 5-hydroxymethylfurfural oxidation, achieving an outstanding 2,5-furandicarboxylic acid yield of 90.5%. This study demonstrates a feasible strategy to rationally design advanced SAA electrocatalysts via the basic principles of p-d orbital hybridization.

Ag+ -Doped InSe Nanosheets for Membrane Electrode Assembly Electrolyzer toward Large-Current Electroreduction of CO2 to Ethanol

It is an appealing approach to CO2 utilization through CO2 electroreduction (CO2 ER) to ethanol at high current density; however, the commonly used Cu-based catalysts cannot sustain large current during CO2 ER despite their capability for ethanol production. Herein, we report that Ag+ -doped InSe nanosheets with Se vacancies can address this grand challenge in a membrane electrode assembly (MEA) electrolyzer. As revealed by our experimental characterization and theoretical calculation, the Ag+ doping, which can tailor the electronic structure of InSe while diversifying catalytically active sites, enables the formation of key reaction intermediates and their sequential evolution into ethanol. More importantly, such a material can well work for large-current conditions in MEA electrolyzers with In2+ species stabilized via electron transfer from Ag to Se. Remarkably, in an MEA electrolyzer by coupling cathodic CO2 ER with anodic oxygen evolution reaction (OER), the optimal catalyst exhibits an ethanol Faradaic efficiency of 68.7 % and a partial current density of 186.6 mA cm-2 on the cathode with a full-cell ethanol energy efficiency of 26.1 % at 3.0 V. This work opens an avenue for large-current production of ethanol from CO2 with high selectivity and energy efficiency by rationally designing electrocatalysts.

A Comprehensive Review on Electrocatalytic Applications of 2D Metallenes

This review introduces metallenes, a cutting-edge form of atomically thin two-dimensional (2D) metals, gaining attention in energy and catalysis. Their unique physicochemical and electronic properties make them promising for applications like catalysis. Metallenes stand out due to their abundance of under-coordinated metal atoms, enhancing the catalytic potential by improving atomic utilization and intrinsic activity. This review explores the utility of 2D metals as electrocatalysts in sustainable energy conversion, focusing on the Oxygen Evolution Reaction, Oxygen Reduction Reaction, Fuel Oxidation Reaction, and Carbon Dioxide Reduction Reaction. Aimed at researchers in nanomaterials and energy, the review is a comprehensive resource for unlocking the potential of 2D metals in creating a sustainable energy landscape.

A Bismuth-Based Zeolitic Organic Framework with Coordination-Linked Metal Cages for Efficient Electrocatalytic CO2 Reduction to HCOOH

Zeolitic metal-organic frameworks (ZMOFs) have emerged as one of the most promsing catalysts for energy conversion, but they suffer from either weak bonding between metal-organic cubes (MOCs) that decrease their stability during catalysis processes or low activity due to inadequate active sites. In this work, through ligand-directing strategy, we successfully obtain an unprecedented bismuth-based ZMOF (Bi-ZMOF) featuring a ACO topological crystal structure with strong coordination bonding between the Bi-based cages. As a result, it enables efficient reduction of CO2 to formic acid (HCOOH) with Faradaic efficiency as high as 91 %. A combination of in situ surface-enhanced infrared absorption spectroscopy and density functional theory calculation reveals that the Bi-N coordination contributes to facilitating charge transfer from N to Bi atoms, which stabilize the intermediate to boost the reduction efficiency of CO2 to HCOOH. This finding highlights the importance of the coordination environment of metal active sites on electrocatalytic CO2 reduction. We believe that this work will offer a new clue to rationally design zeolitic MOFs for catalytic reaction.

Phase Interface Regulating on Amorphous/Crystalline Bismuth Catalyst for Boosted Electrocatalytic CO2 Reduction to Formate

Electroreduction of carbon dioxide into readily collectable and high-value carbon-based fuels is greatly significant to overcome the energy and environmental crises yet challenging in the development of robust and highly efficient electrocatalysts. Herein, a bismuth (Bi) heterophase electrode with enriched amorphous/crystalline interfaces was fabricated via cathodically in situ transformation of Bi-based metal-phenolic complexes (Bi-tannic acid, Bi-TA). Compared with amorphous or crystalline Bi catalyst, the amorphous/crystalline structure Bi leads to significantly enhanced performance for CO2 electroreduction. In a liquid-phase H-type cell, the Faraday efficiency (FE) of formate formation is over 90% in a wide potential range from -0.8 to -1.3 V, demonstrating a high selectivity toward formate. Moreover, in a flow cell, a large current density reaching 600 mA cm-2 can further be rendered for formate production. Theoretical calculations indicate that the amorphous/crystalline Bi heterophase interface exhibits a favorable adsorption of CO2 and lower energy barriers for the rate-determining step compared with the crystalline Bi counterparts, thus accelerating the reaction process. This work paves the way for the rational design of advanced heterointerface catalysts for CO2 reduction.

Anion Exchange Facilitates the In Situ Construction of Bi/BiO Interfaces for Enhanced Electrochemical CO2 -to-Formate Conversion Over a Wide Potential Window

Electrochemical reduction of CO2 (CO2 RR) into value-added products is a promising strategy to reduce energy consumption and solve environmental issues. Formic acid/formate is one of the high-value, easy-to-collect, and economically viable products. Herein, the reconstructed Bi2 O2 CO3 nanosheets (BOCR NSs) are synthesized by an in situ electrochemical anion exchange strategy from Bi2 O2 SO4 as a pre-catalyst. The BOCR NSs achieve a high formate Faradaic efficiency (FEformate ) of 95.7% at -1.1 V versus reversible hydrogen electrode (vs. RHE), and maintain FEformate above 90% in a wide potential range from -0.8 to -1.5 V in H-cell. The in situ spectroscopic studies reveal that the obtained BOCR NSs undergo the anion exchange from Bi2 O2 SO4 to Bi2 O2 CO3 and further promote the self-reduction to metallic Bi to construct Bi/BiO active site to facilitate the formation of OCHO* intermediate. This result demonstrates anion exchange strategy can be used to rational design high performance of the catalysts toward CO2 RR.

High-Rate CO2 Electrolysis to Formic Acid over a Wide Potential Window: An Electrocatalyst Comprised of Indium Nanoparticles on Chitosan-Derived Graphene

Realizing industrial-scale production of HCOOH from the CO2 reduction reaction (CO2 RR) is very important, but the current density as well as the electrochemical potential window are still limited to date. Herein, we achieved this by integration of chemical adsorption and electrocatalytic capabilities for the CO2 RR via anchoring In nanoparticles (NPs) on biomass-derived substrates to create In/X-C (X=N, P, B) bifunctional active centers. The In NPs/chitosan-derived N-doped defective graphene (In/N-dG) catalyst had outstanding performance for the CO2 RR with a nearly 100 % Faradaic efficiency (FE) of HCOOH across a wide potential window. Particularly, at 1.2 A ⋅ cm-2 high current density, the FE of HCOOH was as high as 96.0 %, and the reduction potential was as low as -1.17 V vs RHE. When using a membrane electrode assembly (MEA), a pure HCOOH solution could be obtained at the cathode without further separation and purification. The FE of HCOOH was still up to 93.3 % at 0.52 A ⋅ cm-2 , and the HCOOH production rate could reach 9.051 mmol ⋅ h-1  ⋅ cm-2 . Our results suggested that the defects and multilayer structure in In/N-dG could not only enhance CO2 chemical adsorption capability, but also trigger the formation of an electron-rich catalytic environment around In sites to promote the generation of HCOOH.

Electron delocalization of robust high-nuclear bismuth-oxo clusters for promoted CO2 electroreduction

The integration of high activity, selectivity and stability in one electrocatalyst is highly desirable for electrochemical CO2 reduction (ECR), yet it is still a knotty issue. The unique electronic properties of high-nuclear clusters may bring about extraordinary catalytic performance; however, construction of a high-nuclear structure for ECR remains a challenging task. In this work, a family of calix[8]arene-protected bismuth-oxo clusters (BiOCs), including Bi4 (BiOC-1/2), Bi8Al (BiOC-3), Bi20 (BiOC-4), Bi24 (BiOC-5) and Bi40Mo2 (BiOC-6), were prepared and used as robust and efficient ECR catalysts. The Bi40Mo2 cluster in BiOC-6 is the largest metal-oxo cluster encapsulated by calix[8]arenes. As an electrocatalyst, BiOC-5 exhibited outstanding electrochemical stability and 97% Faraday efficiency for formate production at a low potential of -0.95 V vs. RHE, together with a high turnover frequency of up to 405.7 h-1. Theoretical calculations reveal that large-scale electron delocalization of BiOCs is achieved, which promotes structural stability and effectively decreases the energy barrier of rate-determining *OCHO generation. This work provides a new perspective for the design of stable high-nuclear clusters for efficient electrocatalytic CO2 conversion.

Zn-induced electron-rich Sn catalysts enable highly efficient CO2 electroreduction to formate

Renewable-energy-driven CO2 electroreduction provides a promising way to address the growing greenhouse effect issue and produce value-added chemicals. As one of the bulk chemicals, formic acid/formate has the highest revenue per mole of electrons among various products. However, the scaling up of CO2-to-formate for practical applications with high faradaic efficiency (FE) and current density is constrained by the difficulty of precisely reconciling the competing intermediates (*COOH and HCOO*). Herein, a Zn-induced electron-rich Sn electrocatalyst was reported for CO2-to-formate with high efficiency. The faradaic efficiency of formate (FEformate) could reach 96.6%, and FEformate > 90% was maintained at formate partial current density up to 625.4 mA cm-1. Detailed study indicated that catalyst reconstruction occurred during electrolysis. With appropriate electron accumulation, the electron-rich Sn catalyst could facilitate the adsorption and activation of CO2 molecules to form a intermediate and then promoted the carbon protonation of to yield a HCOO* intermediate. Afterwards, the HCOO* → HCOOH* proceeded via another proton-coupled electron transfer process, leading to high activity and selectivity for formate production.

Integration of Metal-Organic Frameworks and Metals: Synergy for Electrocatalysis

Electrocatalysis is a highly promising technology widely used in clean energy conversion. There is a continuing need to develop advanced electrocatalysts to catalyze the critical electrochemical reactions. Integrating metal active species, including various metal nanostructures (NSs) and atomically dispersed metal sites (ADMSs), into metal-organic frameworks (MOFs) leads to the formation of promising heterogeneous electrocatalysts that take advantage of both components. Among them, MOFs can provide support and protection for the active sites on guest metals, and the resulting host-guest interactions can synergistically enhance the electrocatalytic performance. In this review, three key concerns on MOF-metal heterogeneous electrocatalysts regarding the catalytic sites, conductivity, and catalytic stability are first presented. Then, rational integration strategies of MOFs and metals, including the integration of metal NSs via surface anchoring, space confining, and MOF coating, as well as the integration of ADMSs either with the metal nodes/linkers or within the pores of MOFs, along with their recent progress on synergistic cooperation for specific electrochemical reactions are summarized. Finally, current challenges and possible solutions in applying these increasingly concerned electrocatalysts are also provided.

Controllable Crystallization of Two-Dimensional Bi Nanocrystals with Morphology-Boosted CO2 Electroreduction in Wide pH Environments

Two-dimensional low-melting-point (LMP) metal nanocrystals are attracting increasing attention with broad and irreplaceable applications due to their unique surface and topological structures. However, the chemical synthesis, especially the fine control over the nucleation (reduction) and growth (crystallization), of such LMP metal nanocrystals remains elusive as limited by the challenges of low standard redox potential, low melting point, poor crystalline symmetry, etc. Here, a controllable reduction-melting-crystallization (RMC) protocol to synthesize free-standing and surfactant-free bismuth nanocrystals with tunable dimensions, morphologies, and surface structures is presented. Especially, ultrathin bismuth nanosheets with flat or jagged surfaces/edges can be prepared with high selectivity. The jagged bismuth nanosheets, with abundant surface steps and defects, exhibit boosted electrocatalytic CO2 reduction performances in acidic, neutral, and alkaline aqueous solutions, achieving the maximum selectivity of near unity at the current density of 210 mA cm-2 for formate evolution under ambient conditions. This work creates the RMC pathway for the synthesis of free-standing two-dimensional LMP metal nanomaterials and may find broader applicability in more interdisciplinary applications.

Effects of Iron Species on Low Temperature CO2 Electrolyzers

Electrochemical energy conversion devices are considered key in reducing CO2 emissions and significant efforts are being applied to accelerate device development. Unlike other technologies, low temperature electrolyzers have the ability to directly convert CO2 into a range of value-added chemicals. To make them commercially viable, however, device efficiency and durability must be increased. Although their design is similar to more mature water electrolyzers and fuel cells, new cell concepts and components are needed. Due to the complexity of the system, singular component optimization is common. As a result, the component interplay is often overlooked. The influence of Fe-species clearly shows that the cell must be considered holistically during optimization, to avoid future issues due to component interference or cross-contamination. Fe-impurities are ubiquitous, and their influence on single components is well-researched. The activity of non-noble anodes has been increased through the deliberate addition of iron. At the same time, however, Fe-species accelerate cathode and membrane degradation. Here, we interpret literature on single components to gain an understanding of how Fe-species influence low temperature CO2 electrolyzers holistically. The role of Fe-species serves to highlight the need for considerations regarding component interplay in general.

Nanoarchitectonics of Metallene Materials for Electrocatalysis

Controlling the synthesis of metal nanostructures is one approach for catalyst engineering and performance optimization in electrocatalysis. As an emerging class of unconventional electrocatalysts, two-dimensional (2D) metallene electrocatalysts with ultrathin sheet-like morphology have gained ever-growing attention and exhibited superior performance in electrocatalysis owing to their distinctive properties originating from structural anisotropy, rich surface chemistry, and efficient mass diffusion capability. Many significant advances in synthetic methods and electrocatalytic applications for 2D metallenes have been obtained in recent years. Therefore, an in-depth review summarizing the progress in developing 2D metallenes for electrochemical applications is highly needed. Unlike most reported reviews on the 2D metallenes, this review starts by introducing the preparation of 2D metallenes based on the classification of the metals (e.g., noble metals, and non-noble metals) instead of synthetic methods. Some typical strategies for preparing each kind of metal are enumerated in detail. Then, the utilization of 2D metallenes in electrocatalytic applications, especially in the electrocatalytic conversion reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, fuel oxidation reaction, CO₂ reduction reaction, and N₂ reduction reaction, are comprehensively discussed. Finally, current challenges and opportunities for future research on metallenes in electrochemical energy conversion are proposed.

Sustainable Ammonia Electrosynthesis from Nitrate Wastewater Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Integrating the nitrate reduction reaction (NO₃RR) with polyethylene terephthalate (PET) hydrolysate oxidation to construct the nitrate/PET hydrolysate coelectrolysis system holds a great promise of realizing the simultaneous upcycling of nitrate wastewater and PET plastic waste, which, however, is still an almost untouched research area. Herein, we develop an ultralow content of Ru-incorporated Co-based metal-organic frameworks as a bifunctional precatalyst, which can be in situ reconstructed to Ru-Co(OH)₂ at the cathode and Ru-CoOOH at the anode under electrocatalytic environments, and function as real active catalysts for the NO₃RR and PET hydrolysate oxidation, respectively. With a two-electrode nitrate/PET hydrolysate coelectrolysis system, the current density of 50 mA cm^-2 is achieved at a cell voltage of only 1.53 V, realizing the simultaneous production of ammonia and formate at a lower energy consumption. This study provides a concept for the construction of coelectrolysis systems for upcycling of nitrate wastewater and PET plastic waste.

Ligand-Controlled Electroreduction of CO2 to Formate over Facet-Defined Bimetallic Sulfide Nanoplates

CO₂ reduction (CO₂R) catalyzed by an efficient, stable, and earth-abundant electrocatalyst offers an attractive means to store energy derived from renewable sources. Here, we describe the synthesis of facet-defined Cu₂SnS₃ nanoplates and the ligand-controlled CO₂R property. We show that thiocyanate-capped Cu₂SnS₃ nanoplates possess excellent selectivity toward formate over a wide range of potentials and current densities, attaining a maximum formate Faradaic efficiency of 92% and partial current densities as high as 181 mA cm^-2 when tested using a flow cell with gas-diffusion electrode. In situ spectroscopic measurements and theoretical calculations reveal that the high formate selectivity originates from favorable adsorption of HCOO* intermediates on cationic Sn sites that are electronically modulated by thiocyanates bound to adjacent Cu sites. Our work illustrates that well-defined multimetallic sulfide nanocrystals with tailored surface chemistries could provide a new avenue for future CO₂R electrocatalyst design.

Size Effects of Highly Dispersed Bismuth Nanoparticles on Electrocatalytic Reduction of Carbon Dioxide to Formic Acid

Electrocatalytic reduction of carbon dioxide into value-added chemical fuels is a promising way to achieve carbon neutrality. Bismuth-based materials have been considered as favorable electrocatalysts for converting carbon dioxide to formic acid. Moreover, size-dependent catalysis offers significant advantages in catalyzed heterogeneous chemical processes. However, the size effects of bismuth nanoparticles on formic acid production have not been fully explored. Here, we prepared Bi nanoparticles uniformly supported on porous TiO₂ substrate electrocatalytic materials by in situ segregation of the Bi element from Bi₄Ti₃O₁₂. The Bi-TiO₂ electrocatalyst with Bi nanoparticles of 2.83 nm displays a Faradaic efficiency of greater than 90% over a wide potential range of 400 mV. Theoretical calculations have also demonstrated subtle electronic structural evolutions induced by the size variations of Bi nanoparticles, where the 2.83 nm Bi nanoparticles display the most active p-band and d-band centers to guarantee high electroactivity toward CO₂RR.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Why can poorly conductive Bi@UiO-MOF catalyze CO2 electroreduction?

Metal NP @ metal-organic frameworks (MOFs) are widely used in electrocatalysis. However, many of the MOFs are poorly conductive. Here, we loaded bismuth (Bi) into a Zr-based MOF of the UiO structure that is active for CO₂ reduction to formate and found that a moderate conductivity of the nanosized MOFs is sufficient to support a reasonably high catalytic current density. This finding allows simpler catalyst design and quantitative rationalization of MOF electrocatalysis.

Oxide-Derived Bismuth as an Efficient Catalyst for Electrochemical Reduction of Flue Gas

Post-combustion flue gas (mainly containing 5-40% CO₂ balanced by N₂ ) accounts for about 60% global CO₂ emission. Rational conversion of flue gas into value-added chemicals is still a formidable challenge. Herein, this work reports a β-Bi₂ O₃ -derived bismuth (OD-Bi) catalyst with surface coordinated oxygen for efficient electroreduction of pure CO₂ , N_2, and flue gas. During pure CO₂ electroreduction, the maximum Faradaic efficiency (FE) of formate reaches 98.0% and stays above 90% in a broad potential of 600 mV with a long-term stability of 50 h. Additionally, OD-Bi achieves an ammonia (NH₃ ) FE of 18.53% and yield rate of 11.5 µg h^-1 mg_cat ^-1 in pure N₂ atmosphere. Noticeably, in simulated flue gas (15% CO₂ balanced by N₂ with trace impurities), a maximum formate FE of 97.3% is delivered within a flow cell, meanwhile above 90% formate FEs are obtained in a wide potential range of 700 mV. In-situ Raman combined with theory calculations reveals that the surface coordinated oxygen species in OD-Bi can drastically activate CO₂ and N₂ molecules by selectively favors the adsorption of *OCHO and *NNH intermediates, respectively. This work provides a surface oxygen modulation strategy to develop efficient bismuth-based electrocatalysts for directly reducing commercially relevant flue gas into valuable chemicals.

Recent advances in the theoretical studies on the electrocatalytic CO2 reduction based on single and double atoms

Excess of carbon dioxide (CO2) in the atmosphere poses a significant threat to the global climate. Therefore, the electrocatalytic carbon dioxide reduction reaction (CO2RR) is important to reduce the burden on the environment and provide possibilities for developing new energy sources. However, highly active and selective catalysts are needed to effectively catalyze product synthesis with high adhesion value. Single-atom catalysts (SACs) and double-atom catalysts (DACs) have attracted much attention in the field of electrocatalysis due to their high activity, strong selectivity, and high atomic utilization. This review summarized the research progress of electrocatalytic CO2RR related to different types of SACs and DACs. The emphasis was laid on the catalytic reaction mechanism of SACs and DACs using the theoretical calculation method. Furthermore, the influences of solvation and electrode potential were studied to simulate the real electrochemical environment to bridge the gap between experiments and computations. Finally, the current challenges and future development prospects were summarized and prospected for CO2RR to lay the foundation for the theoretical research of SACs and DACs in other aspects.

Active Learning Accelerating to Screen Dual-Metal-Site Catalysts for Electrochemical Carbon Dioxide Reduction Reaction

Dual-metal-site catalysts (DMSCs) are increasingly important catalysts in the field of electrochemical carbon dioxide reduction reaction (CO₂RR) in recent years. However, rapid screening of suitable metal combinations of DMSCs remains a huge challenge. Herein, we constructed an active learning (AL) framework to study CO₂RR to HCOOH. This AL framework turned out a success in the accurate prediction of 282 DMSCs for CO₂RR through interactive learning between users and machine learning (ML) models. Among the 42 DMSCs calculated in three iteration loops of AL, 29 DMSCs were obtained, where the screening success rate was as high as 70%. Furthermore, we found five experimentally unexplored DMSCs that exhibited better CO₂RR activity and selectivity than pure Bi. Low prediction errors on other DMSCs show that the AL model possessed outstanding universality. The results prove the excellent potential of the AL method and provide guidance on the design of high-performance electrocatalysts for CO₂RR.

Bi2S3 nanorods grown on multiwalled carbon nanotubes as highly active catalysts for CO2 electroreduction to formate

Bi-based materials are promising electrocatalysts for CO₂ reduction but one of the key technological hurdles is the design of stable, active and affordable Bi-based catalysts over a wide potential range. Herein, Bi₂S₃/CNTs nanocomposites are constructed by anchoring bismuth sulfide (Bi₂S₃) nanorods onto the multiwalled carbon nanotubes (CNTs) and utilizing them in electrocatalytic CO₂ reduction. CNTs, as a support, not only guarantee the conductivity and dispersibility of Bi₂S₃ nanorods but also improve the electrolyte infiltration and optimize the electronic structure of the Bi₂S₃. As expected, the Bi₂S₃/CNTs nanocomposite exhibits a faradaic efficiency for HCOO^- (FE_HCOO-) of 99.3% with a current density of -20.3 mA cm^-2 at -0.91 V vs. RHE. The FE_HCOO- is stably maintained at over > 91% in a wide potential window from -0.71 V to -1.31 V. Theoretical calculation analyses reveal that the strong interaction between Bi₂S₃ and CNTs is conductive to decreasing the energy barrier of *OCHO, stabilizing the intermediate *OCHO, and inhibiting the hydrogen evolution reaction. The current study provides an insightful understanding of the mechanism of the CO₂ electroreduction reaction, and paves a new way for developing superior and affordable electrocatalysts.

Halogen-Incorporated Sn Catalysts for Selective Electrochemical CO2 Reduction to Formate

Electrochemically reducing CO₂ to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn-based catalysts have been widely studied for electrochemical CO₂ reduction reaction (CO₂ RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen-incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO₂ RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen-incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO₂ RR to produce formate.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Structure-activity relationship of Cu-based catalysts for the highly efficient CO2 electrochemical reduction reaction

Electrocatalytic carbon dioxide reduction (CO₂RR) is a relatively feasible method to reduce the atmospheric concentration of CO₂. Although a series of metal-based catalysts have gained interest for CO₂RR, understanding the structure-activity relationship for Cu-based catalysts remains a great challenge. Herein, three Cu-based catalysts with different sizes and compositions (Cu@CNTs, Cu₄@CNTs, and CuNi₃@CNTs) were designed to explore this relationship by density functional theory (DFT). The calculation results show a higher degree of CO₂ molecule activation on CuNi₃@CNTs compared to that on Cu@CNTs and Cu₄@CNTs. The methane (CH₄) molecule is produced on both Cu@CNTs and CuNi₃@CNTs, while carbon monoxide (CO) is synthesized on Cu₄@CNTs. The Cu@CNTs showed higher activity for CH₄ production with a low overpotential value of 0.36 V compared to CuNi₃@CNTs (0.60 V), with *CHO formation considered the potential-determining step (PDS). The overpotential value was only 0.02 V for *CO formation on the Cu₄@CNTs, and *COOH formation was the PDS. The limiting potential difference analysis with the hydrogen evolution reaction (HER) indicated that the Cu@CNTs exhibited the highest selectivity of CH₄ among the three catalysts. Therefore, the sizes and compositions of Cu-based catalysts greatly influence CO₂RR activity and selectivity. This study provides an innovative insight into the theoretical explanation of the origin of the size and composition effects to inform the design of highly efficient electrocatalysts.

Metallene-related materials for electrocatalysis and energy conversion

As a member of graphene analogs, metallenes are a class of two-dimensional materials with atomic thickness and well-controlled surface atomic arrangement made of metals or alloys. When utilized as catalysts, metallenes exhibit distinctive physicochemical properties endowed from the under-coordinated metal atoms on the surface, making them highly competitive candidates for energy-related electrocatalysis and energy conversion systems. Significantly, their catalytic activity can be precisely tuned through the chemical modification of their surface and subsurface atoms for efficient catalyst engineering. This minireview summarizes the recent progress in the synthesis and characterization of metallenes, together with their use as electrocatalysts toward reactions for energy conversion. In the Synthesis section, we pay particular attention to the strategies designed to tune their exposed facets, composition, and surface strain, as well as the porosity/cavity, defects, and crystallinity on the surface. We then discuss the electrocatalytic properties of metallenes in terms of oxygen reduction, hydrogen evolution, alcohol and acid oxidation, carbon dioxide reduction, and nitrogen reduction reaction, with a small extension regarding photocatalysis. At the end, we offer perspectives on the challenges and opportunities with respect to the synthesis, characterization, modeling, and application of metallenes.

Surface-Oxygen-Rich Bi@C Nanoparticles for High-Efficiency Electroreduction of CO2 to Formate

The electrochemical CO₂ reduction reaction (CO₂RR) is a promising strategy to alleviate excessive CO₂ levels in the atmosphere and produce value-added feedstocks and fuels. However, the synthesis of high-efficiency and robust electrocatalysts remains a great challenge. This work reports the green preparation of surface-oxygen-rich carbon-nanorod-supported bismuth nanoparticles (SOR Bi@C NPs) for an efficient CO₂RR toward formate. The resultant SOR Bi@C NPs catalyst displays a Faradaic efficiency of more than 91% for formate generation over a wide potential range of 440 mV. Ex situ XPS and XANES and in situ Raman spectroscopy demonstrate that the Bi-O/Bi (110) structure in the pristine SOR Bi@C NPs can remain stable during the CO₂RR process. DFT calculations reveal that the Bi-O/Bi (110) structure can facilitate the formation of the *OCHO intermediate. This work provides an approach to the development of high-efficiency Bi-based catalysts for the CO₂RR and offers a unique insight into the exploration of advanced electrocatalysts.