Chiral Liquid Crystalline Metal-Organic Framework Thin Films for Highly Circularly Polarized Luminescence

Combining metal-organic frameworks (MOFs) with liquid crystals to construct liquid crystalline MOFs (LCMOF) offers the advantage of endowing and enhancing their functionality, yet it remains a challenging task. Herein, we report chiral liquid crystalline MOF (CLCMOF) thin films by cross-linking the chiral liquid crystals (CLC) with MOF thin films to realize highly circular polarization luminescence (CPL) performance with photo and thermal switching. By layer by layer cross-linking stilbene-containing CLC with stilbene-based MOF (CLC/MOF) thin film, the CLCMOF thin films were successfully obtained after UV irradiation due to the abundant [2 + 2] photocycloaddition. The resulted CLCMOF thin films have strong chirality, obvious photochromic fluorescent, and strong CPL performance (the asymmetry factor reaches to 0.4). Furthermore, due to the photochromic fluorescent MOF and thermotropic CLC, the CPL can be reversed and red-shifted after heating and UV irradiation treatment, showing photo- and thermal CPL switching. Such MOF-based CPL thin films with photo/thermal CPL switching were prepared to patterns and codes for the demonstration of potential application in advanced information anticounterfeit and encryption. This study not only opens a strategy for developing chiral thin films combining MOFs and liquid crystals but also offers a new route to achieve CPL switching in optical applications.

Effect of PI3K/AKT/mTOR signaling pathway-based clustered nursing care combined with papaverine injection on vascular inflammation and vascular crisis after replantation of severed fingers

This research aimed to investigate the effect of PI3K (phosphatidylinositol 3-kinase)/AKT (protein kinase B)/mTOR (mammalian target protein of rapamycin) signaling pathway-based clustering care combined with papaverine injection on vascular inflammation and vascular crisis after finger amputation and replantation. 100 patients admitted in General Hospital of Ningxia Medical University from April 2022 to December 2022 for replantation of severed fingers were selected and divided into a control group (n = 50) and an observation group (n = 50) using the randomized grouping principle. The control group received a papaverine injection and general nursing care, the observation group received a papaverine injection and clustered care. The pain score; constipation incidence; replantation finger survival rate; physician, nurse, and patient satisfaction; serum inflammatory factors; vascular crisis parameters; and occurrence of adverse reactions were compared between the two patient groups. Enzyme-linked immunosorbent assay was performed to detect PI3K, AKT, and mTOR protein concentrations in the venous blood of the two groups, and statistical analysis of the data was performed. On postoperative day 7, the pain score and incidence of constipation in the observation group were lower than those in the control group (P < 0.05); the survival rate of reimplanted fingers in the observation group was 88.00%, which was higher than that in the control group 80.00% (P < 0.05); the satisfaction of doctors, nurses, and patients in the observation group was higher than that in the control group; the concentrations of interleukin-1 (IL-1), tumor necrosis factor (TNF-α), blood flow resistance index (RI), and arterial pulsatility index (PI) in the observation group were lower than those in the control group, while the concentration of interleukin-10 (IL-10), vascular diameter, and Vm (mean blood flow velocity) were higher in the observation group than those in the control group; the differences were statistically significant (P < 0.05). The difference in the incidence of adverse reactions between the two groups was not statistically significant (P > 0.05). The concentrations of PI3K, AKT, and mTOR proteins in the observation group were higher than those in the control group (P < 0.05). The concentrations of PI3K, AKT, and mTOR proteins in the observation group were higher than those in the control group (P < 0.05). Overall, these findings suggest that clustered care combined with papaverine injection reduces vascular inflammatory symptoms and vascular crisis in the treatment of severed finger replantation through the PI3K/AKT/mTOR signaling pathway.

Sequential Selective Dissolution of Coinage Metals in Recyclable Ionic Media

Coinage metals Cu, Ag, and Au are essential for modern electronics and their recycling from waste materials is becoming increasingly important to guarantee the security of their supply. Designing new sustainable and selective procedures that would substitute currently used processes is crucial. Here, we describe an unprecedented approach for the sequential dissolution of single metals from Cu, Ag, and Au mixtures using biomass-derived ionic solvents and green oxidants. First, Cu can be selectively dissolved in the presence of Ag and Au with a choline chloride/urea/H2O2 mixture, followed by the dissolution of Ag in lactic acid/H2O2. Finally, the metallic Au, which is not soluble in either solution above, is dissolved in choline chloride/urea/Oxone. Subsequently, the metals were simply and quantitatively recovered from dissolutions, and the solvents were recycled and reused. The applicability of the developed approach was demonstrated by recovering metals from electronic waste substrates such as printed circuit boards, gold fingers, and solar panels. The dissolution reactions and selectivity were explored with different analytical techniques and DFT calculations. We anticipate our approach will pave a new way for the contemporary and sustainable recycling of multi-metal waste substrates.

Modulating the pore and electronic structure for targeted recovery of platinum: Accelerated kinetic and reinforced coordination

Adsorption for recovery of low-concentration platinum (Pt) from the complex composition of acidic digestates was challenging because of slow kinetic and poor affinity. It was expected to be overcome by the improvement of pore size distribution and adsorption site activity. Herein, a series of Prussian blue etchings (PBE) with porosity-rich and activity-high cyano (CN) was synthesized to recover low-concentration Pt. The N2 isotherm results showed that the pore structure evolved from mesoporous to microporous. The Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations results revealed that the modulation of electronic structure converted FeII to FeIII in [FeII(CN)6]4-. The coexistence of micro- and meso-pore structures provided channels to accelerate adsorption and ensured PtII enrichment. The regulation of Fe valence state activated CN, which reinforced the strength of coordination interaction between Pt and Fe-CN- at N-atom. The adsorption rate and maximum capacity of PBE1 were 4.4 and 2.5 times higher than those of PB, respectively, due to the dual efficacy of accelerated kinetic and reinforced coordination. This study systematically analyzes the pivotal role of pore and electronic structure modulation in adsorption kinetic and affinity, which provides a novel strategy for PtII targeted recovery.

Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation

Recovering platinum group metals from secondary resources is crucial to meet the growing demand for high-tech applications. Various techniques are explored, and adsorption using porous materials has emerged as a promising technology due to its efficient performance and environmental beingness. However, the challenge lies in effectively recovering and separating individual platinum group metals (PGMs) given their similar chemical properties. Herein, a breakthrough approach is presented by sophisticatedly tailoring the coordination micro-environment in a series of aminopyridine-based porous organic polymers, which enables the creation of platinum-specific nanotraps for efficient separation of binary PGMs (platinum/palladium). The newly synthesized POP-o2NH2-Py demonstrates record uptakes and selectivity toward platinum over palladium, with the amino groups adjacent to the pyridine moieties being vital in improving platinum binding performance. Further breakthrough experiments underline its remarkable ability to separate platinum and palladium. Spectroscopic analysis reveals that POP-o2NH2-Py offers a more favorable coordination fashion to platinum ions compared to palladium ions owing to the greater interaction between N and Pt4+ and stronger intramolecular hydrogen bonding between the amino groups and four coordinating chlorines at platinum. These findings underscore the importance of fine-tuning the coordination micro-environment of nanotraps through subtle modifications that can greatly enhance the selectivity toward the desired metal ions.

3D-Continuous Nanoporous Covalent Framework Membrane Nanoreactors with Quantitatively Loaded Ultrafine Pd Nanocatalysts

The confinement effect of catalytic nanoreactors containing metal catalysts within nanometer-sized volumes has attracted significant attention for their potential to enhance reaction rate and selectivity. Nevertheless, unregulated catalyst loading, aggregation, leaching, and limited reusability remain obstacles to achieving an efficient nanoreactor. A robust and durable catalytic membrane nanoreactor prepared by incorporating palladium nanocatalysts within a 3D-continuous nanoporous covalent framework membrane is presented. The reduction of palladium precursor occurs on the pore surface within 3D nanochannels, producing ultrafine palladium nanoparticles (Pd NPs) with their number density adjustable by varying metal precursor concentrations. The precise catalyst loading enables controlling the catalytic activity of the reactor while preventing excess metal usage. The facile preparation of Pd NP-loaded free-standing membrane materials allows hydrodechlorination in both batch and continuous flow modes. In batch mode, the catalytic activity is proportional to the loaded Pd amount and membrane area, while the membrane retains its activity upon repeated use. In continuous mode, the conversion remains above 95% for over 100 h, with the reactant solution passing through a single 50 µm-thick Pd-loaded membrane. The efficient nanoporous film-type catalytic nanoreactor may find applications in catalytic reactions for small chemical devices as well as in conventional chemistry and processes.

Efficient treatment of palladium from wastewater by acrolein cross-linked chitosan hydrogels: Adsorption, kinetics, and mechanisms

Herein we present a study on the preparation and properties of a hydrogel adsorbent for treatment of wasted palladium souring from actial petrochemical industrial wastewater. Chitosan was used as the raw material and acrolein as the cross-linking agent for the hydrogel (A/CS). The adsorption behaviors of the hydrogel for Pd(II) ions were characterized and analyzed. The effect of pH, temperature, adsorption kinetics, and thermodynamics were investigated. Langmuir models were employed to describe the adsorption isotherms, while the pseudo-second-order equation was applied to describe the adsorption kinetics. The experimental results demonstrated that the adsorption was a monolayer chemical adsorption, and the adsorption capacity was found to reach 505.05 mg/g under optimal conditions. In addition, FT-IR and XPS analyses, combined with MS calculations confirmed that chelation and electrostatic attraction were dominated in the adsorption process. Overall, the development of this hydrogel adsorbent will provide a practical approach to the treatment of industrial wastewater containing palladium and have great potential for practical applications.

Adsorption of palladium from chloride aqueous solution using silica alginate nanomaterial

The adsorption characteristics of palladium from chloride aqueous solution onto the silica alginate (SA-Si) nanomaterial have been investigated. The prepared nanomaterial (SA-Si) was characterized by various advanced techniques that ensured a successful preparation process. Different adsorption parameters including the solution pH, shaking time, palladium ion concentration, adsorbent dosage, and temperature were investigated. The experimental results showed that the pseudo-first-order model provided the best fitting for the palladium ions adsorption, and the time required to reach equilibrium was 90.0 min. The adsorption isotherm result from palladium was well described by the Langmuir isotherm model and the maximum adsorption capacity of (SA-Si) nanomaterial was estimated as 12.50 mg/g for Pd(II). Moreover, the thermodynamic results demonstrated that Pd(II) sorption onto (SA-Si) nanomaterial was endothermic and spontaneous. Additionally, the SA-Si nanomaterial can be used as an effective adsorbent for the sorption of Pd(II) from various metal ions present in fission products.

An Aryl-ether-linked Covalent Organic Framework Modified with Thioamide Groups for Selective Extraction of Palladium from Strong Acid Solutions

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl-ether-linked covalent organic framework (COF-316-DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF-316-DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF-316-DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF-316-DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g-1 ), and excellent reusability in 4 M nitric acid. Moreover, COF-316-DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT-IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions.

Reusable Zwitterionic Porous Organic Polymers for Bilirubin Removal in Serum

Herein, we report a straightforward strategy to construct reusable, hemocompatible, and highly efficient bilirubin adsorbents by installing zwitterionic modules into a porous organic polymer (POP) for hemoperfusion application. Three types of zwitterions with different amounts are used to evaluate their impacts on the characteristics of POPs, including carboxybetaine methacrylate (CB), sulfobetaine methacrylate (SB), and 2-methacryloyloxyethyl phosphorylcholine (MPC). Results show that zwitterions can improve hemocompatibility, hydrophilicity, and bilirubin uptake of the POP. Among all zwitterionic POPs, POP-CB-40% exhibits the best bilirubin uptake, ∼46.5 times enhancement compared with the non-zwitterionic POP in 100% serum. This enhancement can be attributed to the improved hydrophilicity and protein resistance ability in biological solutions. More importantly, the reusability test shows that POP-CB-40% maintains ∼99% of bilirubin uptake capacity at fifth recycling in 100% serum. Findings in this work provide a guideline for the design of biocompatible and efficient POP-based bilirubin adsorbents for hemoperfusion therapy.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

Skeleton engineering of rigid covalent organic frameworks to alter the number of binding sites for improved radionuclide extraction

Crystalline porous covalent frameworks (COFs) have been considered as a platform for uranium extraction from seawater and nuclear waste. However, the role of rigid skeleton and atomically precise structures of COFs is often ignored in the design of defined binding configuration. Here, a COF with an optimized relative position of two bidentate ligands realizes full potential in uranium extraction. Compared with the para-chelating groups, the optimized ortho-chelating groups with oriented adjacent phenolic hydroxyl groups on the rigid skeleton endow an additional uranyl binding site, thereby increasing the total number of binding sites up to 150%. Experimental and theoretical results indicate that the uranyl capture is greatly improved via the energetically favored multi-site configuration and the adsorption capacity reaches up to 640 mg g-1, which exceeds that of most reported COF-based adsorbents with chemical coordination mechanism in uranium aqueous solution. This ligand engineering strategy can efficiently advance the fundamental understanding of designing the sorbent systems for extraction and remediation technology.

Material Design Strategies for Recovery of Critical Resources from Water

Population growth, urbanization, and decarbonization efforts are collectively straining the supply of limited resources that are necessary to produce batteries, electronics, chemicals, fertilizers, and other important products. Securing the supply chains of these critical resources via the development of separation technologies for their recovery represents a major global challenge to ensure stability and security. Surface water, groundwater, and wastewater are emerging as potential new sources to bolster these supply chains. Recently, a variety of material-based technologies have been developed and employed for separations and resource recovery in water. Judicious selection and design of these materials to tune their properties for targeting specific solutes is central to realizing the potential of water as a source for critical resources. Here, the materials that are developed for membranes, sorbents, catalysts, electrodes, and interfacial solar steam generators that demonstrate promise for applications in critical resource recovery are reviewed. In addition, a critical perspective is offered on the grand challenges and key research directions that need to be addressed to improve their practical viability.

Graphene oxide-based dendritic adsorbent for the excellent capturing of platinum group elements

Herein, we report amino functionalized thermally stable graphene oxide-based dendritic adsorbent (GODA) with the highest sorption capacity ever recorded for platinum group elements (PGEs), including platinum (Pt(IV), PtCl₆^2-) and palladium (Pd(II), PdCl₄^2-), from highly acidic aqueous solutions. The GODA was designed and synthesized to have fully ionized amine binding sites and was characterized in detail. The detail batch adsorption experiment along with kinetic, isotherm, and thermodynamic studies were carried out to investigate the adsorption efficacy of GODA. For both Pt(IV) and Pd(II), the experimental data are more accurately fitted with the pseudo-second-order and the intraparticle diffusion kinetic models and Langmuir isotherm model as compared to the pseudo-first-order kinetic model and Freundlich and Temkin isotherm models, respectively. The material showed the highest ever adsorption capacities of 827.8 ± 27.7 mg/g (4.24 ± 0.00 mmol/g) and 890.7 ± 29.1 mg/g (8.37 ± 0.00 mmol/g) for Pt(IV) and Pd(II), respectively, at pH 1. The adsorption equilibriums were achieved within 70 min and 65 min for Pt(IV) and Pd(II), respectively. The thermodynamic parameters indicate that the adsorptions of both metals are spontaneous. The binding mechanisms are considered to be electrostatic interactions, hydrogen bonding, cationic-π bonding, and surface complexation between the sorbent and the sorbates. Furthermore, the as-prepared GODA exhibited high thermal stability and significant acid-resistance at pH 1. The GODA demonstrated excellent regeneration and reusability for Pt(IV) and Pd(II) over five adsorption/desorption cycles, indicating its excellence in practical applications.

Sustainable and Selective Modern Methods of Noble Metal Recycling

Noble metals exhibit broad arrange of applications in industry and several aspects of human life which are becoming more and more prevalent in modern times. Due to their limited sources and constantly and consistently expanding demand, recycling of secondary and waste materials must accompany the traditional mineral extractions. This Minireview covers the most recent solvometallurgical developments in regeneration of Pd, Pt, Rh, Ru, Ir, Os, Ag and Au with emphasis on sustainability and selectivity. Processing-by selective oxidative dissolution, reductive precipitation, solvent extraction, co-precipitation, membrane transfer and trapping to solid media-of eligible multi-metal substrates for recycling from waste printed circuit boards to end-of-life automotive catalysts are discussed. Outlook for possible future direction for noble metal recycling is proposed with emphasis on sustainable approaches.

iClick synthesis of network metallopolymers

Described is an approach to preparing the first iClick network metallopolymers with porous properties. Treating digoldazido complex 2-AuN3 with trigoldacetylide 3-AuPPh3 or 3-AuPEt3, trialkyne 3-H, tetragoldacetylide 4-AuPPh3, or tetraalkyne 4-H in CH₂Cl₂ affords five iClick network metallopolymers 5-AuPPh3, 5-AuPEt3, 5-H, 6-AuPPh3, and 6-H. Confirmation of the iClick network metallopolymers comes from FTIR, ¹³C solid-state cross-coupling magic angle spinning (CPMAS) NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and nitrogen and CO₂ sorption analysis. Employing model complexes 7-AuPPh3, 7-AuPEt3, 7-H, 8-AuPPh3, and 8-H provides structural insights due to the insolubility of iClick network metallopolymers.

Metal-Organic Framework Accelerated One-Step Capture and Reduction of Palladium to Catalytically Active Nanoparticles

Recovery of noble metals and in situ transforming to functional materials hold great promise in the sustainability of natural resources but remain as a challenge. Herein, the variable chemical microenvironments created by the inorganic-organic hybrid composition of metal-organic frameworks (MOFs) were exploited to tune the metal-support interactions, thus establishing an integrated strategy for recovering and reducing palladium (Pd). Assisted by sonic waves and alcoholic solvent, selective capture of Pd(II) from a complicated matrix to directly afford Pd nanoparticles (NPs) in MOFs can be achieved in one step within several minutes. Mechanism investigation reveals that the Pd binding site and the energy barriers between ionic and metallic status are sensitive to chemical environments in different frameworks. Thanks to the clean, dispersive, and uniform nature of Pd NPs, Pd@MOFs synthesized from a complicated environment exhibited high catalytic activity toward 4-nitrophenol reduction and Suzuki coupling reactions.

Perfluorinated conjugated microporous polymer for targeted capture of Ag(I) from contaminated water

The maximum targeted capture silver from contaminated water is urgently necessary for sustainable development. Herein, the perfluorination conjugated microporous polymer adsorbent (F-CMP) has been fabricated by Sonogashira-Hagihara coupling reaction and employed to remove Ag(I) ions. Characterizations of NMR, XPS and FT-IR indicate the successful synthesis of F-CMP adsorbent. The influence factors of F-CMP on Ag(I) adsorption behavior are studied, and the adsorption capacity of Ag(I) reaches 251.3 mg/g. The experimental results of isothermal adsorption and kinetic adsorption are consistent with the Freundlich model and pseudo-second-order isothermal adsorption model, which follows a multilayer adsorption behavior on the uniform surface of the adsorbent, and the chemical adsorption becomes the main rate-limiting step. Combined with DFT calculation, the adsorption mechanism of Ag(I) by F-CMP is elucidated. The peaks shift of sp before and after adsorption is larger than that of F1s, suggesting that the -CC- on the F-CMP becomes the dominant chelation site of Ag(I). Furthermore, F-CMP exhibits specific adsorption for Ag(I) in polymetallic complex water, with the maximum selectivity coefficient of 31.5. Our study may provide a new possibility of perfluorinated CMPs for effective capture of Ag(I) ions to address environmental issues.

Iodine‐Catalysed Dissolution of Elemental Gold in Ethanol

Gold is a scarce element in the Earth's crust but indispensable in modern electronic devices. New, sustainable methods of gold recycling are essential to meet the growing eco‐social demand of gold. Here, we describe a simple, inexpensive, and environmentally benign dissolution of gold under mild conditions. Gold dissolves quantitatively in ethanol using 2‐mercaptobenzimidazole as a ligand in the presence of a catalytic amount of iodine. Mechanistically, the dissolution of gold begins when I₂ oxidizes Au⁰ and forms a [Au^II₂]⁻ species, which undergoes subsequent ligand‐exchange reactions and forms a stable bis‐ligand Au^I complex. H₂O₂ oxidizes free iodide and regenerated I₂ returns back to the catalytic cycle. Addition of a reductant to the reaction mixture precipitates gold quantitatively and partially regenerates the ligand. We anticipate our work will open a new pathway to more sustainable metal recycling with the utilization of just catalytic amounts of reagents and green solvents.

Construction of porphyrin and viologen-linked cationic porous organic polymer for efficient and selective gold recovery

Recycling precious metals from electronic waste not only benefits environmental protection, but is also favorable for alleviating resource shortages. Ionic porous organic polymers, as one type of burgeoning material, are regarded as excellent adsorbents due to their high ion density, but their application in precious metal recovery is still very limited. Here, V-PPOP-Br, a highly stable and easy-to-build cationic porous organic polymer, was successfully prepared for the first time. By linking porphyrins with viologens, V-PPOP-Br obtained the characteristics of a hierarchical porous structure, a high ion density skeleton, and a rich nitrogen content, which gave it an ultrahigh adsorption capacity (Q_max = 792.22 mg g^-1) and rapid adsorption rate for Au(III). V-PPOP-Br also had an effective Au(III) recovery capability from SIM cards. Mechanism investigation confirmed that this remarkable adsorption performance was attributed to the interplay of ion exchange, redox reactions and coordination. Moreover, V-PPOP-Br had excellent recyclability and could maintain an ultrahigh adsorption efficiency of 81% after eight consecutive adsorption-desorption experiments. These excellent performances as well as the roughly calculated gold recycling economics ($37.37/g V-PPOP-Br) confirmed that it possesses promising potential as an ionic porous material for gold recovery.

Nanotraps based on multifunctional materials for trapping and enrichment

Many biomarkers for early diagnosis of cancer and other diseases are difficult to detect because they often exist in body fluids in very low concentrations and are masked by high-abundance proteins such as albumin and immunoglobulins. At the same time, water pollution is one of the most serious environmental problems, but the existing adsorption materials have many shortcomings such as slow kinetics, small adsorption capacity and low adsorption efficiency. Nanotraps, mixed with gases or liquids, can capture and concentrate target substances, such as biomolecules, metal ions and oxoanions. Using nanotraps is a versatile sample pre-processing approach and it can improve the sensitivity of downstream analysis techniques. Herein, the preparations and applications of different types of nanotraps are mainly introduced. What's more, the shortcomings of using nanotraps in practical applications are also discussed. Using nanotraps is a promising sample pre-processing technology, which is of great significance for biomarkers discovery, diseases diagnosis, sewage purification and valuable ions recovery. STATEMENT OF SIGNIFICANCE: This review collates and summarizes the preparations and applications of different types of nanotraps, and discusses the shortcomings of using nanotraps in practical applications. Nanotraps, mixed with gases or liquids, can capture and concentrate target materials, such as biomolecules, metal ions and oxoanions. Using nanotraps is a versatile sample pre-processing approach and it can improve the sensitivity of downstream analysis techniques. During the COVID-19 pandemic, hydrogel nanotraps were successfully utilized for RT-PCR analysis with the FDA Emergency Used Authorization for COVID-19. Using nanotraps is a promising sample pre-processing technology, which is of great significance for biomarkers discovery, diseases diagnosis, sewage purification and valuable ions recovery.

Amino-based covalent organic frameworks for a wide range of functional modification

A versatile protocol for modification of amino-based COFs with desired functionalities was developed via transforming the unreachable amino groups into imine, thiourea, amide and azo-based functional groups.

Nanospace Decoration with Uranyl-Specific "Hooks" for Selective Uranium Extraction from Seawater with Ultrahigh Enrichment Index

Mining uranium from seawater is highly desirable for sustaining the increasing demand for nuclear fuel; however, access to this unparalleled reserve has been limited by competitive adsorption of a wide variety of concentrated competitors, especially vanadium. Herein, we report the creation of a series of uranyl-specific "hooks" and the decoration of them into the nanospace of porous organic polymers to afford uranium nanotraps for seawater uranium extraction. Manipulating the relative distances and angles of amidoxime moieties in the ligands enabled the creation of uranyl-specific "hooks" that feature ultrahigh affinity and selective sequestration of uranium with a distribution coefficient threefold higher compared to that of vanadium, overcoming the long-term challenge of the competing adsorption of vanadium for uranium extraction from seawater. The optimized uranium nanotrap (2.5 mg) can extract more than one-third of the uranium in seawater (5 gallons), affording an enrichment index of 3836 and thus presenting a new benchmark for uranium adsorbent. Moreover, with improved selectivity, the uranium nanotraps could be regenerated using a mild base treatment. The synergistic combination of experimental and theoretical analyses in this study provides a mechanistic approach for optimizing the selectivity of chelators toward analytes of interest.

Recyclable Supramolecular Assembly-Induced Emission System for Selective Detection and Efficient Removal of Mercury(II)

An efficient strategy for simultaneously detecting and removing Hg²⁺ from water is vital to address mercury pollution. Herein a supramolecular assembly G⊂H with photoluminescent properties is facilely constructed through the self-assembly of a functional pillar[5]arene bearing two N,N-dimethyldithiocarbamoyl binding sites (H) and an AIE-active tetraphenylethene derivative (G). Remarkably, the fluorescence of G⊂H can be exclusively quenched by Hg²⁺ among the 30 cations due to the formation of non-luminous ground state complex and only L-cysteine can restore fluorescence in the common 20 amino acids. Meanwhile, the probe G⊂H has a considerable thermal and pH stability, a good anti-interference property from various cations, and a satisfactory sensitivity. More importantly, G⊂H exhibits a prominent capability of Hg²⁺ removal with rapid capture rate (within 1 h) and excellent adsorption efficiency (98 %), as well as a highly efficient recyclability without losing any adsorption activity.

Metalated Porous Phenanthroline-Based Polymers as Efficient Heterogeneous Catalysts for Regioselective C-H Activation of Heteroarenes

Direct C-H bond activation of heterocycles as a step-economical and environmentally friendly approach to build the heterobiaryls motifs is highly attractive, but it still has a challenge to design and prepare a cheap and regioselective heterogeneous catalyst. To tackle this challenge, we have introduced Ni species into a porous phenanthroline-based organic polymer donated as POP-Phen@Ni. This heterogeneous catalyst shows excellent catalytic performances in regioselective C-H activation of heterocycles, even better than those of the corresponding homogenous catalyst. H/D exchange experiments show that the lithium bis(trimethylsilyl)amide (LiHMDS), a base added in the reaction, play a very important role during the reaction processes. We believe that this heterogeneous catalyst would open a new door for design of heterogeneous catalysts to efficiently catalyze the regioselective C-H activation of heterocycles.

Microporous Hyper-Cross-Linked Polymers with High and Tuneable Content of Pyridine Units: Synthesis and Application for Reversible Sorption of Water and Carbon Dioxide

New hyper-cross-linked porous organic polymers (POPs) with a high content of pyridine segments (7.86 mmol pyridine g^-1 ), and a micro/mesoporous texture are reported. The networks are achieved by the chain-growth homopolymerization of 2,6- and 3,5-diethynylpyridines. The pyridine segments form links interconnecting the polyacetylene main chains in these networks. The content of pyridine segments in the networks can be tuned by copolymerizing diethynylpyridines with 1,3-diethynylbenzene. The pyridine rings in the networks serve as base and hydrophilic centers for the sorption of CO₂ and water. The homopolymer pyridine networks are highly efficient in the low-pressure adsorption/desorption of CO₂ . This sorption mode is promising for the postcombustion removal of CO₂ from the fuel gas. The poly(3,5-diethynylpyridine) network exhibits high efficiency in capturing and releasing water vapor (determined capacity 376 mg g^-1 at 298 K and relative humidity (RH) = 90% is one of the highest values reported for POPs) and is a promising material for the cyclic water harvesting from air. The reported networks are characterized by ¹³ C cross-polarization magic angle spinning NMR, thermogravimetric analysis, and N₂ adsorption/desorption and their efficiency in CO₂ and H₂ O capturing is discussed in relation to the content and type of incorporated pyridine segments.

Precious metals recovery from aqueous solutions using a new adsorbent material

Platinum group metals (PGMs) palladium, platinum, and ruthenium represent the key materials for automotive exhaust gas treatment. Since there are no adequate alternatives, the importance of these metals for the automotive industry is steadily rising. The high value of PGMs in spent catalysts justifies their recycling. Therefore, it is really important to recovery platinum group metals from aqueous solutions. Of the many PGMs recovery procedures, adsorption is a process with a good efficiency, but an important role is played by the adsorbent material used into the process. In order to improve the adsorption properties of materials were developed new methods for chemical modification of the solid supports, through functionalization with different extractants. In present paper a new adsorbent material (Chitosan-DB18C6) was used for PGMs recovery. The new adsorbent material was produced by impregnating Chitosan with dibenzo-18-crown-6-ether using Solvent Impregnated Resin (SIR) method. The crown ethers were chosen as extractant due to their known ability to bind metallic ions, whether they are symmetrically or unsymmetrically substituted. In order to determine the PGMs recovery efficiency for new prepared adsorbent material the equilibrium and kinetic studies were performed. Also, to study the PGMs adsorption mechanism the experimental data were modelled using pseudo-first-order and pseudo-second order kinetic models. Experimental data were fitted with three equilibrium isotherm models: Langmuir, Freundlich and Sips. The results proved that new adsorbent material (Chitosan-DB18C6) is an efficient adsorbent for PGMs recovery from aqueous solutions.