J‐Aggregate‐Based FRET Monitoring of Drug Release from Polymer Nanoparticles with High Drug Loading

Oligo(styryl)benzenes liposomal AIE-dots for bioimaging and phototherapy in an in vitro model of prostate cancer

Whilst the development of advanced organic dots with aggregation-induced emission characteristics (AIE-dots) is being intensively studied, their clinical translation in efficient biotherapeutic devices has yet to be tackled. This study explores the synergistic interplay of oligo(styryl)benzenes (OSBs), potent fluorogens with an increased emission in the aggregate state, and Indocyanine green (ICG) as dual Near Infrared (NIR)-visible fluorescent nanovesicles with efficient reactive oxygen species (ROS) generation capacity for cancer treatment using photodynamic therapy (PDT). The co-loading of OSBs and ICG in different nanovesicles has been thoroughly investigated. The nanovesicles' physicochemical properties were manipulated via molecular engineering by modifying the structural properties of the lipid bilayer and the number of oligo(ethyleneoxide) chains in the OSB structure. Diffusion Ordered Spectroscopy (DOSY) NMR and spectrofluorometric studies revealed key differences in the structure of the vesicles and the arrangement of the OSB and ICG in the bilayer. The in vitro assessment of these OSB-ICG nanovesicles revealed that the formulations can increase the temperature and generate ROS after photoirradiation, showing for the first time their potential as dual photothermal/photodynamic (PTT/PDT) agents in the treatment of prostate cancer. Our study provides an exciting opportunity to extend the range of applications of OSB derivates to potentiate the toxicity of phototherapy in prostate and other types of cancer.

Optical tracking of the heterogeneous solvent diffusion dynamics and swelling kinetics of single polymer microspheres

The diffusion dynamics of small molecules into polymer entities is crucial for driving their morphology and function, which can be applied to research fields such as optical identification, medical implantation and intelligent sensing platforms. Herein, we demonstrate a nondestructive bright-field imaging strategy to monitor and control the morphology of polymer microspheres by varying the interfacial interaction and diffusion in a penetrant bath. The nanoscale interface movement of single polymer microspheres was tracked and converted into the diameter variation during the swelling event with sub-pixel accuracy, which is consistent with the calculation using Li-Tanaka's kinetic equations. More interestingly, the solvent diffusion dynamics along different directions of one particle are heterogeneous, indicating the non-uniform internal structure of a soft confined assembly. The swelling characteristics of single polymer microspheres can be quantified by this simple imaging strategy, and the transient intermediate swelling states are captured. To model the lifetime and stabilization times of microplastic entities, solvent selectivity and thermodynamic regulation were introduced to obtain the activation energy down to the single micro-entity level. This optical methodology shows capability for decoding the complex diffusion mechanism in polymer entities and provides guidance for the design of drug delivery systems, sensor platforms, and optical responsive materials.

Natural-product-based, carrier-free, noncovalent nanoparticles for tumor chemo-photodynamic combination therapy

Cancer, with its diversity, heterogeneity, and complexity, is a significant contributor to global morbidity, disability, and mortality, highlighting the necessity for transformative treatment approaches. Photodynamic therapy (PDT) has aroused continuous interest as a viable alternative to conventional cancer treatments that encounter drug resistance. Nanotechnology has brought new advances in medicine and has shown great potential in drug delivery and cancer treatment. For precise and efficient therapeutic utilization of such a tumor therapeutic approach with high spatiotemporal selectivity and minimal invasiveness, the carrier-free noncovalent nanoparticles (NPs) based on chemo-photodynamic combination therapy is essential. Utilizing natural products as the foundation for nanodrug development offers unparalleled advantages, including exceptional pharmacological activity, easy functionalization/modification, and well biocompatibility. The natural-product-based, carrier-free, noncovalent NPs revealed excellent synergistic anticancer activity in comparison with free photosensitizers and free bioactive natural products, representing an alternative and favorable combination therapeutic avenue to improve therapeutic efficacy. Herein, a comprehensive summary of current strategies and representative application examples of carrier-free noncovalent NPs in the past decade based on natural products (such as paclitaxel, 10-hydroxycamptothecin, doxorubicin, etoposide, combretastatin A4, epigallocatechin gallate, and curcumin) for tumor chemo-photodynamic combination therapy. We highlight the insightful design and synthesis of the smart carrier-free NPs that aim to enhance PDT efficacy. Meanwhile, we discuss the future challenges and potential opportunities associated with these NPs to provide new enlightenment, spur innovative ideas, and facilitate PDT-mediated clinical transformation.

Tumor Microenvironment Activatable Nanoprodrug System for In Situ Fluorescence Imaging and Therapy of Liver Cancer

The development of new imaging and treatment nanoprodrug systems is highly demanded for diagnosis and therapy of liver cancer, a severe disease characterized by a high recurrence rate. Currently, available small molecule drugs are not possible for cancer diagnosis because of the fast diffusion of imaging agents and low efficacy in treatment due to poor water solubility and significant toxic side effects. In this study, we report the development of a tumor microenvironment activatable nanoprodrug system for the diagnosis and treatment of liver cancer. This nanoprodrug system can accumulate in the tumor site and be selectively activated by an excess of hydrogen peroxide (H2O2) in the tumor microenvironment, releasing near-infrared solid-state organic fluorescent probe (HPQCY-1) and phenylboronic acid-modified camptothecin (CPT) prodrug. Both HPQCY-1 and CPT prodrugs can be further activated in tumor sites for achieving more precise in situ near-infrared (NIR) fluorescence imaging and treatment while reducing the toxic effects of drugs on normal tissues. Additionally, the incorporation of hydrophilic multivalent chitosan as a carrier effectively improved the water solubility of the system. This research thus provides a practical new approach for the diagnosis and treatment of liver cancer.

The Balance Effect of π-π Electronic Coupling on NIR-II Emission and Photodynamic Properties of Highly Hydrophobic Conjugated Photosensitizers

Deep NIR organic phototheranostic molecules generally have large π-conjugation structures and show highly hydrophobic properties, thus, forming strong π-π stacking in the aqueous medium, which will affect the phototheranostic performance. Herein, an end-group strategy is developed to lift the performance of NIR-II emitting photosensitizers. Extensive characterizations reveal that the hydrogen-bonding interactions of the hydroxyl end group can induce a more intense π-π electronic coupling than the chlorination-mediated intermolecular forces. The results disclose that π-π stacking will lower fluorescence quantum yield but significantly benefit the photodynamic therapy (PDT) efficiency. Accordingly, an asymmetrically substituted derivative (BTIC-δOH-2Cl) is developed, which shows balanced phototheranostic properties with excellent PDT efficiency (14.6 folds of ICG) and high NIR-II fluorescence yield (2.27%). It proves the validity of the end-group strategy on controlling the π-π interactions and rational tuning the performance of NIR-II organic phototheranostic agents.

J-Aggregation Strategy toward Potentiated NIR-II Fluorescence Bioimaging of Molecular Fluorophores

Molecular fluorophores emitting in the second near-infrared (NIR-II, 1000-1700 nm) window with strong optical harvesting and high quantum yields hold great potential for in vivo deep-tissue bioimaging and high-resolution biosensing. Recently, J-aggregates are harnessed to engineer long-wavelength NIR-II emitters and show unique superiority in tumor detection, vessel mapping, surgical navigation, and phototheranostics due to their bathochromic-shifted optical bands in the required slip-stacked arrangement aggregation state. However, despite the preliminary progress of NIR-II J-aggregates and theoretical study of structure-property relationships, further paradigms of NIR-II J-aggregates remain scarce due to the lack of study on aggregated fluorophores with slip-stacked fashion. In this effort, how to utilize the specific molecular structure to form slip-stacked packing motifs with J-type aggregated exciton coupling is emphatically elucidated. First, several molecular regulating strategies to achieve NIR-II J-aggregates containing intermolecular interactions and external conditions are positively summarized and deeply analyzed. Then, the recent reports on J-aggregates for NIR-II bioimaging and theranostics are systematically summarized to provide a clear reference and direction for promoting the development of NIR-II organic fluorophores. Eventually, the prospective efforts on ameliorating and promoting NIR-II J-aggregates to further clinical practices are outlined.

Targeted delivery of epirubicin to cancerous cell using copper sulphide nanoparticle coated with polyarginine and 5TR1 aptamer

Chemotherapy has been widely acknowledged as a primary approach for cancer treatment. However, the administration of chemotherapy agents is often limited by their adverse effects that result from an inability to distinguish between healthy and malignant cells. As such, utilising nanocarriers in targeted drug delivery can significantly reduce these side effects while enhancing therapeutic efficacy. Herein, we developed copper sulphide nanoparticles (CuSNPs) loaded with epirubicin (Epi) coated by polyarginine and 5TR1 aptamer (CEPA) to target mucin-1 which is overexpressed on various types of cancer cells. MTT results revealed that CEPA significantly induced cytotoxicity of the drug in desired cell lines (C26 and MCF-7, mucin+) compared to CEPA-treated CHO cells (non-target, mucin-), verifying the targeting ability of CEPA complex. The obtained results from both flow cytometry analysis and cell imaging demonstrated that CEPA complex had successful internalisation in both target cell lines but no internalisation in CHO cell line. The result of in vivo assay showed more tumour inhibition and more accumulation in tumour tissue for CEPA complex in comparison to free Epi. To conclude, the CEPA complex has demonstrated superior efficacy and fewer adverse reactions compared to Epi. This indicates a promising and effective strategy for treating cancer.

Quantitative Measurement of Drug Release Dynamics within Targeted Organelles Using Förster Resonance Energy Transfer

Measuring the release dynamics of drug molecules after their delivery to the target organelle is critical to improve therapeutic efficacy and reduce side effects. However, it remains challenging to quantitatively monitor subcellular drug release in real time. To address the knowledge gap, a novel gemini fluorescent surfactant capable of forming mitochondria-targeted and redox-responsive nanocarriers is designed. A quantitative Förster resonance energy transfer (FRET) platform is fabricated using this mitochondria-anchored fluorescent nanocarrier as a FRET donor and fluorescent drugs as a FRET acceptor. The FRET platform enables real-time measurement of drug release from organelle-targeted nanocarriers. Moreover, the obtained drug release dynamics can evaluate the duration of drug release at the subcellular level, which established a new quantitative method for organelle-targeted drug release. This quantitative FRET platform can compensate for the absent assessment of the targeted release performances of nanocarriers, offering in-depth understanding of the drug release behaviors at the subcellular targets.

Biomimetic retractable DNA nanocarrier with sensitive responsivity for efficient drug delivery and enhanced photothermal therapy

BACKGROUND

The coalition of DNA nanotechnology with diversiform inorganic nanoparticles offers powerful tools for the design and construction of stimuli-responsive drug delivery systems with spatiotemporal controllability, but it remains challenging to achieve high-density oligonucleotides modification close to inorganic nanocores for their sensitive responsivity to optical or thermal signals.

RESULTS

Inspired by Actinia with retractable tentacles, here we design an artificial nano-Actinia consisted of collapsible DNA architectures attached on gold nanoparticle (AuNP) for efficient drug delivery and enhanced photothermal therapy. The collapsible spheroidal architectures are formed by the hybridization of long DNA strand produced in situ through rolling circle amplification with bundling DNA strands, and contain numerous double-helical segments for the intercalative binding of quercetin as the anti-cancer drug. Under 800-nm light irradiation, the photothermal conversion of AuNPs induces intensive localized heating, which unwinds the double helixes and leads to the disassembly of DNA nanospheres on the surface of AuNPs. The consequently released quercetin can inhibit the expression of heat shock protein 27 and decrease the thermal resistance of tumor cells, thus enhancing photothermal therapy efficacy.

CONCLUSIONS

By combining the deformable DNA nanostructures with gold nanocores, this Actinia-mimetic nanocarrier presents a promising tool for the development of DNA-AuNPs complex and opens a new horizon for the stimuli-responsive drug delivery.

J-aggregation strategy of organic dyes for near-infrared bioimaging and fluorescent image-guided phototherapy

With the continuous development of organic materials for optoelectronic devices and biological applications, J-aggregation has attracted a great deal of interest in both dye chemistry and supramolecular chemistry. Except for the characteristic red-shifted absorption and emission, such ordered head-to-tail stacked structures may be accompanied by special properties such as enhanced absorption, narrowed spectral bandwidth, improved photothermal and photodynamic properties, aggregation-induced emission enhancement (AIEE) phenomenon, and so forth. These excellent properties add great potential to J-aggregates for optical imaging and phototherapy in the near-infrared (NIR) region. Despite decades of development, the challenge of rationally designing the molecular structure to adjust intermolecular forces to induce J-aggregation of organic dyes remains significant. In this review, we discuss the formation of J-aggregates in terms of intermolecular interactions and summarize some recent studies on J-aggregation dyes for NIR imaging and phototherapy, to provide a clear direction and reference for designing J-aggregates of near-infrared organic dyes to better enable biological applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

In Situ Formation of o-Phenylenediamine Cascade Polymers Mediated by Metal-Organic Framework Nanozymes for Fluorescent and Photothermal Dual-Mode Assay of Acetylcholinesterase Activity

A fluorescent and photothermal dual-mode assay method was established for the detection of acetylcholinesterase (AChE) activity based on in situ formation of o-phenylenediamine (oPD) cascade polymers. First, copper metal-organic frameworks of benzenetricarboxylic acid (Cu-BTC) were screened out as nanozymes with excellent oxidase-like activity and confinement catalysis effect. Then, an ingenious oPD cascade polymerization strategy was proposed. That is, oPD was oxidized by Cu-BTC to oPD oligomers with strong yellow fluorescence, and oPD oligomers were further catalyzed to generate J-aggregation, which promotes the formation of oPD polymer nanoparticles with a high photothermal effect. By utilizing thiocholine (enzymolysis product of acetylthiocholine) to inhibit the Cu-BTC catalytic effect, AChE activity was detected through the fluorescence-photothermal dual-signal change of oPD oligomers and polymer nanoparticles. Both assay modes have low detection limitation (0.03 U L^-1 for fluorescence and 0.05 U L^-1 for photothermal) and can accurately detect the AChE activity of human serum (recovery 85.0-111.3%). The detection results of real serum samples by fluorescent and photothermal dual modes are consistent with each other (relative error ≤ 5.2%). It is worth emphasizing that this is the first time to report the high photothermal effect of oPD polymers and the fluorescence-photothermal dual-mode assay of enzyme activity.

Fluorescent COFs with a Highly Conjugated Structure for Combined Starvation and Gas Therapy

Covalent organic frameworks (COFs) show great potential in biomedicine, but the synthesis of fluorescent ones with a highly conjugated structure in mild conditions remains a challenge. Herein, we reported a facile method to synthesize a nanosized, highly conjugated, and N-enriched COF material with bright fluorescence and further integrated it as a novel nanoplatform for efficient cancer starvation/gas therapy. High surface area and a porous structure endowed COFs with large loading capacity for both glucose oxidase and l-arginine, while conjugated monomer and N-doping guaranteed bright fluorescence and relatively strong interactions between loaded cargos. Well-designed size allowed easy cell uptake of drug-loaded COFs, which finally resulted in a highly efficient starvation therapy by consuming large amounts of glucose in cancer cells. H₂O₂, the byproduct during glucose consumption, was made full use of oxidizing l-arginine to generate toxic NO. This constructed combined starvation and gas therapy and exhibited emerging antimigration performance. Both in vitro and in vivo experiments confirmed an excellent cancer therapeutic effect than a single therapy, and the novel therapeutic platform showed good biocompatibility. Detailed mechanism study demonstrated that cell apoptosis and lysosomal damage contributed most to the synergistic treatment. Our study developed a new strategy to synthesize highly conjugated COFs with fluorescence and reported the potential applications in cancer therapy.

Microfluidic Nanoparticles for Drug Delivery

Nanoparticles (NPs) have attracted tremendous interest in drug delivery in the past decades. Microfluidics offers a promising strategy for making NPs for drug delivery due to its capability in precisely controlling NP properties. The recent success of mRNA vaccines using microfluidics represents a big milestone for microfluidic NPs for pharmaceutical applications, and its rapid scaling up demonstrates the feasibility of using microfluidics for industrial-scale manufacturing. This article provides a critical review of recent progress in microfluidic NPs for drug delivery. First, the synthesis of organic NPs using microfluidics focusing on typical microfluidic methods and their applications in making popular and clinically relevant NPs, such as liposomes, lipid NPs, and polymer NPs, as well as their synthesis mechanisms are summarized. Then, the microfluidic synthesis of several representative inorganic NPs (e.g., silica, metal, metal oxide, and quantum dots), and hybrid NPs is discussed. Lastly, the applications of microfluidic NPs for various drug delivery applications are presented.

Fluorescence Resonance Energy Transfer Measurements in Polymer Science: A Review

Fluorescence resonance energy transfer (FRET) is a non-invasive characterization method for studying molecular structures and dynamics, providing high spatial resolution at nanometer scale. Over the past decades, FRET-based measurements are developed and widely implemented in synthetic polymer systems for understanding and detecting a variety of nanoscale phenomena, enabling significant advances in polymer science. In this review, the basic principles of fluorescence and FRET are briefly discussed. Several representative research areas are highlighted, where FRET spectroscopy and imaging can be employed to reveal polymer morphology and kinetics. These examples include understanding polymer micelle formation and stability, detecting guest molecule release from polymer host, characterizing supramolecular assembly, imaging composite interfaces, and determining polymer chain conformations and their diffusion kinetics. Finally, a perspective on the opportunities of FRET-based measurements is provided for further allowing their greater contributions in this exciting area.

Physical Characteristics and Cellular Pharmacological Activity of Baicalin-Lecithin Complex-Loaded Poly(lactic-co-glycolic acid) Membranes

In this study, the physiochemical properties and cellular-level biological effects of baicalin-lecithin complex (BLC)-loaded poly(lactic-co-glycolic acid) (PLGA) membranes were studied. Several parameters were measured to evaluate the preparation of these membranes, such as the coating thickness, scanning electron microscopy-detected surface morphology, X-ray diffraction, Fourier transform infrared spectroscopy, and thermodynamic behavior. The drug-release behavior was mainly controlled by the degradation of the PLGA. The release of BLC lasted for more than one month, which matched the development of the restenosis process. The BLC-coated PLGA (60:40) membrane had good drug release in terms of its long release cycle, and the efficacy of baicalin in the form of BLC in cardiovascular stents matched the development of restenosis. In vitro cell culture test showed that endothelial cells (ECs) and smooth muscle cells (SMCs) for 12 h, 1 d and 3 d, BLC-loaded PLGA membranes (1%, 5% and 10% (w/w)) had significant activity towards the proliferation of ECs and the inhibition of SMC proliferation (P < 0.05). BLC-loaded PLGA film has good drug release trends.

Influence of nanoparticle mechanical property on protein corona formation

A protein corona forms around nanoparticles when they are intravenously injected into the bloodstream. The composition of the protein corona dictates the interactions between nanoparticles and the biological systems thus their immune evasion, blood circulation, and biodistribution. Here, we report for the first time the impact of nanoparticle stiffness on protein corona formation using a unique emulsion core silica shell nanocapsules library with a wide range of mechanical properties over four magnitudes (700 kPa to 10 GPa). The nanocapsules with different stiffness showed distinct proteomic fingerprints. The protein corona of the stiffest nanocapsules contained the highest amount of complement protein (Complement C3) and immunoglobulin proteins, which contributed to their high macrophage uptake, confirming the important role of nanocapsules stiffness in controlling the protein corona formation thus their in vitro and in vivo behaviors.

Eu(III)-Chelated Polymeric Hybrid Nanoplatform for Luminescence Resonance Energy Transfer (LRET)-Based Real-Time Monitoring of Organic Cargo Release

The real-time monitoring of specific guest release from nanoscale assemblies has been of great interest for the potential application in nanomedicine. Herein, we present a facile one-pot strategy to achieve a metal-chelated nanoscale platform that enables a highly efficient luminescence resonance energy transfer (LRET) for the monitoring of hydrophobic cargo release. To this end, Eu(III) as a lanthanide luminophore was employed to induce the metal-mediated self-assembly of chelating block copolymers in the presence of fluorescent Nile Blue (NB) as an organic cargo, which can then produce a nanoscale assembly containing a hybrid polyionic complex (HPIC) of Eu(III) and NB as LRET pairs. Exploiting this Eu(III)-chelated, NB-incorporated polymeric assembly as a luminescent platform that allows for the intermolecular distance-sensitive LRET, we further demonstrate that the facile monitoring of NB release from the carriers was made possible upon the addition of serum albumin as a protein reservoir for the released hydrophobic guest molecules.

FRET Ratiometric Nanoprobes for Nanoparticle Monitoring

Fluorescence labelling is often used for tracking nanoparticles, providing a convenient assay for monitoring nanoparticle drug delivery. However, it is difficult to be quantitative, as many factors affect the fluorescence intensity. Förster resonance energy transfer (FRET), taking advantage of the energy transfer from a donor fluorophore to an acceptor fluorophore, provides a distance ruler to probe NP drug delivery. This article provides a review of different FRET approaches for the ratiometric monitoring of the self-assembly and formation of nanoparticles, their in vivo fate, integrity and drug release. We anticipate that the fundamental understanding gained from these ratiometric studies will offer new insights into the design of new nanoparticles with improved and better-controlled properties.

Super-Assembled Periodic Mesoporous Organosilica Frameworks for Real-Time Hypoxia-Triggered Drug Release and Monitoring

Hypoxia, induced by inadequate oxygen supply, is a key indication of various major illnesses, which necessitates the need to develop new nanoprobes capable of sensing hypoxia environments for the targeted system monitoring and drug delivery. Herein, we report a hypoxia-responsive, periodic mesoporous organosilica (PMO) nanocarrier for repairing hypoxia damage. β-cyclodextrin (β-CD) capped azobenzene functionalization on the PMO surface could be effectively cleaved by azoreductase under a hypoxia environment. Moreover, the nanosystem is equipped with fluorescence resonance energy transfer (FRET) pair (tetrastyrene derivative (TPE) covalently attached to the PMO framework as the donor and Rhodamine B (RhB) in the mesopores as the receptor) for intracellular visualization and tracking of drug release in real-time. The design of intelligent nanocarriers capable of simultaneous reporting and treating of hypoxia conditions highlights a great potential in the biomedical domain.

Zeptomole Imaging of Cytosolic MicroRNA Cancer Biomarkers with A Light-Controlled Nanoantenna

Detecting and quantifying intracellular microRNAs (miRNAs) are a critical step in resolving a cancer diagnostic and resolving the ensemble of gene products that orchestrate the living state of cells. However, the nanoprobe for detecting low abundance miRNAs in cell cytosol is restricted by either the "one-to-one" signal-trigger model or difficulty for cytosol delivery. To address these challenges, we designed a light-harvesting nanoantenna-based nanoprobe, which directs excitation energy to a single molecule to sensitively detect cytosolic miRNA. With light irradiation, the light-harvesting nanoantenna effectively disrupted lysosomal structures by generation of reactive oxygen species, substantially achieved cytosol delivery. The nanoantenna containing > 4000 donor dyes can efficiently transfer excitation energy to one or two acceptors with 99% efficiency, leading to unprecedented signal amplification and biosensing sensitivity. The designed nanoantenna can quantify cytosolic miR-210 at zeptomolar level. The fluorescence lifetime of the donor exhibited good relationship with miR-210 concentration in the range of 0.032 to 2.97 amol/ngRNA. The zeptomole sensitivity of nanoantenna provides accurate bioimaging of miR-210 both in multiple cell lines and in vivo assay, which creates a pathway for the creation of miRNA toolbox for quantitative epigenetics and personalized medicine.

Kinetic stability modulation of polymeric nanoparticles for enhanced detection of influenza virus via penetration of viral fusion peptides

Specific interactions between viruses and host cells provide essential insights into material science-based strategies to combat emerging viral diseases. pH-triggered viral fusion is ubiquitous to multiple viral families and is important for understanding the viral infection cycle. Inspired by this process, virus detection has been achieved using nanomaterials with host-mimetic membranes, enabling interactions with amphiphilic hemagglutinin fusion peptides of viruses. Most research has been on designing functional nanoparticles with fusogenic capability for virus detection, and there has been little exploitation of the kinetic stability to alter the ability of nanoparticles to interact with viral membranes and improve their sensing performance. In this study, a homogeneous fluorescent assay using self-assembled polymeric nanoparticles (PNPs) with tunable responsiveness to external stimuli is developed for rapid and straightforward detection of an activated influenza A virus. Dissociation of PNPs induced by virus insertion can be readily controlled by varying the fraction of hydrophilic segments in copolymers constituting PNPs, giving rise to fluorescence signals within 30 min and detection of various influenza viruses, including H9N2, CA04(H1N1), H4N6, and H6N8. Therefore, the designs demonstrated in this study propose underlying approaches for utilizing engineered PNPs through modulation of their kinetic stability for direct and sensitive identification of infectious viruses.

Quantitative comparison of different fluorescent dye-loaded nanoparticles

Labeling nanoparticles with fluorescent dyes is a common approach to investigate their cell uptake and biodistribution, providing valuable information for the preclinical assessment of nanoparticles for drug delivery. However, the underlying assumption that the fluorescence intensity of dye-labeled nanoparticles correlates positively with the amount of nanoparticles taken up by cells might not be valid under some conditions, as it can be affected by many factors including dye dispersion, dye quenching, and material shading. Here we demonstrated that both nanoparticles with hydrophobic dyes encapsulated inside and nanoparticles with hydrophilic dyes conjugated on the particle surface suffer from different degrees of dye quenching, making it challenging for quantitative comparison of cell uptake of different nanoparticles. To address this challenge, we proposed a possible solution for direct comparative studies of dye-labeled nanoparticles. This work provides valuable information for designing and evaluating different nanoparticles for drug delivery applications.

Na6 MQ4 (M=Zn, Cd; Q=S, Se): Promising New Ternary Infrared Nonlinear Optical Materials

Four sodium-based ternary IR nonlinear optical (NLO) materials, Na₆ MQ₄ (M=Zn, Cd; Q=S, Se), were prepared through a high-temperature flux method. The crystal structure of the compounds is built up of isolated [MQ₄ ] tetrahedra and a 3D framework formed by the NaQ_n (n=4, 5) units. The two selenides, Na₆ MSe₄ (M=Zn, Cd), as promising IR NLO materials, show moderate second-harmonic generation (SHG) responses (0.9 and 0.5×AgGaS₂ ) with good phase-matching behavior, as well as high laser damage thresholds (2 and 1.9×AgGaS₂ ). The two sulfides, Na₆ MS₄ (M=Zn, Cd), exhibit higher laser damage thresholds (13 and 4×AgGaS₂ ), but smaller SHG responses (0.3 and 0.2×AgGaS₂ ). Theoretical calculations and statistical analyses indicate that the SHG effect and band gap in the compounds originate mainly from the distorted NaQ₄ NLO-active units with a short Na-S bond length, which provides a new insight into the design of novel IR NLO materials.