Liquid Organic Frameworks: A Liquid Crystalline 8-Connected Network with Body-Centered Cubic Symmetry

Lithium-ion batteries with fluorinated mesogen-based liquid-crystalline electrolytes: molecular design towards enhancing oxidation stability

Two-dimensional (2D) nanostructured liquid crystals containing fluorinated cyclohexylphenyl and cyclic carbonate moieties have been developed as quasi-solid-state self-organized electrolytes for safe lithium-ion batteries. We have designed lithium ion-conductive liquid-crystalline (LC) materials with fluorine substituents on mesogens for improved oxidation stability. Computational studies suggest that the fluorination of mesogens lowers the highest occupied molecular orbital (HOMO) level of LC molecules and improves their oxidation resistance as electrolytes. The LC molecule complexed with lithium bis(trifluoromethanesulfonyl)imide exhibits smectic A LC phases with 2D ion transport pathways over wide temperature ranges. Cyclic voltammetry measurements of the fluorinated mesogen-based LC electrolytes indicate that they are electrochemically stable above 4.0 V vs. Li/Li+. Lithium half-cells composed of fluorinated LC electrolytes show higher discharge capacity and coulombic efficiency than those containing non-fluorinated analogous LC molecules. Combining molecular dynamics simulations with the experimental results, it is revealed that the fluorination of the mesogen effectively enhances the electrochemical stability of the LC electrolytes without significantly disrupting ionic conductivities and the LC order.

Coarse-Grained Molecular Simulation of Bolapolyphiles with a Multident Lateral Chain: Formation and Structural Analysis of Cubic Network Phases

Bolapolyphiles constitute a versatile class of materials with a demonstrated potential to form a wide variety of complex ordered mesophases. In particular, cubic network phases (like the gyroid, primitive, and diamond phases) have been a target of many studies for their ability to create percolating 3D nanosized channels. In this study, molecular simulations are used to explore the phase behavior of bolapolyphiles containing a rigid rodlike core, associating hydrophilic core ends and a hydrophobic side chain with a multident architecture, i.e., where the branching pattern can vary from bident (two branches) to hexadent (six branches). Upon network phase formation, its skeleton is made up of "nodes" populated by the core ends and "struts" populated by the cores. It is shown that, by varying the side chain length, branching pattern, and attachment point to the core, one can alter the crowding around the cores and hence tune the nodal size and nodal valence (i.e., number of connecting struts) which lead to different types of network morphologies. For example, for a fixed total side chain length, having more branches generates a stronger crowding around the molecular core, driving them to form bundlelike domains with curvier interfaces that result in thinner struts. Also, attaching the lateral chain closer to one core end breaks the symmetry between the environments around the two core ends, leading to networks with bimodal nodal sizes. Importantly, since the characterization of (ordered or partially ordered) network phases is challenging given the potential incompatibilities between the simulation box size with the structure's space group periodic symmetry and the effect of morphological defects, a detailed framework is presented to analyze and fully characterize the unit cell parameters and structure factor of such systems.

Highly branched bolapolyphilic liquid crystals with a cubic A15 network at the triangle-square transition

Rod-like bolapolyphiles with highly branched carbosilane-based side-chains self-assemble into several honeycomb structures if the oligo(p-phenylene ethynylene) core is polyfluorinated, whereas for the non-fluorinated series an A15 type cubic network of rod-bundles was observed instead, suggesting a brand new pathway for the transition between triangular and square honeycomb phases.

Stereochemistry-dependent thermotropic liquid crystalline phases of monosaccharide-based amphiphiles

Conformational rigidity controls the bulk self-assembly and liquid crystallinity from amphiphilic block molecules to copolymers. The effects of block stereochemistry on the self-assembly have, however, been less explored. Here, we have investigated amphiphilic block molecules involving eight open-chain monosaccharide-based polyol units possessing different stereochemistries, derived from D-glucose, D-galactose, L-arabinose, D-mannose and L-rhamnose (allylated monosaccharides t-Glc*, e-Glc*, t-Gal*, e-Gal*, t-Ara*, e-Ara*, t-Man*, and t-Rha*), end-functionalized with repulsive tetradecyl alkyl chain blocks to form well-defined amphiphiles with block molecule structures. All compounds studied showed low temperature crystalline phases due to polyol crystallization, and smectic (lamellar) and isotropic phases upon heating in bulk. Hexagonal cylindrical phase was additionally observed for the composition involving t-Man*. Cubic phases were observed for e-Glc*, e-Gal*, e-Ara*, and t-Rha* derived compounds. Therein, the rich array of WAXS-reflections suggested that the crystalline polyol domains are not ultra-confined in spheres as in classic cubic phases but instead show network-like phase continuity, which is rare in bulk liquid crystals. Importantly, the transition temperatures of the self-assemblies were observed to depend strongly on the polyol stereochemistry. The findings underpin that the stereochemistry in carbohydrate-based assemblies involves complexity, which is an important parameter to be considered in material design when developing self-assemblies for different functions.

Leveraging Macromolecular Isomerism for Phase Complexity in Janus Nanograins

It remains intriguing whether macromolecular isomerism, along with competing molecular interactions, could be leveraged to create unconventional phase structures and generate considerable phase complexity in soft matter. Herein, we report the synthesis, assembly, and phase behaviors of a series of precisely defined regioisomeric Janus nanograins with distinct core symmetry. They are named B₂DB₂ where B stands for iso-butyl-functionalized polyhedral oligomeric silsesquioxanes (POSS) and D stands for dihydroxyl-functionalized POSS. While BPOSS prefers crystallization with a flat interface, DPOSS prefers to phase-separate from BPOSS. In solution, they form 2D crystals owing to strong BPOSS crystallization. In bulk, the subtle competition between crystallization and phase separation is strongly influenced by the core symmetry, leading to distinct phase structures and transition behaviors. The phase complexity was understood based on their symmetry, molecular packing, and free energy profiles. The results demonstrate that regioisomerism could indeed generate profound phase complexity.

Network Phases with Multiple-Junction Geometries at the Gyroid-Diamond Transition

A novel phase sequence for the transition from the double diamond to the double gyroid cubic phases via two non-cubic intermediate phases, an orthorhombic Fmmm (O⁶⁹) phase and a hexagonal P6₃/m (H¹⁷⁶) phase, is reported for specifically designed bolapolyphiles composed of a linear rod-like bistolane core with sticky glycerol ends and two branched central and two linear peripheral side chains. These liquid crystalline (LC) phases represent members of a new class of unicontinuous network phases, formed by longitudinal rod bundles with polar spheres acting as junctions and the alkyl chains forming the continuum around them. In contrast to previously known bicontinuous cubic networks, they combine different junctions with different angles in a common structure, and one of them even represents a triple network instead of the usually found double networks. This provides new perspectives for the design of soft network phases with enhanced structural complexity, inspiring the search for new supramolecular networks, nano-particle arrays, and photonic band-gap materials.

Tetrahedral Liquid-Crystalline Networks: An A15-Like Frank-Kasper Phase Based on Rod-Packing

The Pm 3 ‾ n cubic and other low-symmetry Frank-Kasper phases are known to be formed by soft spheres, ranging from metals to block copolymer micelles and colloidal nanoparticles. Here, we report a series of X-shaped polyphiles composed of sticky rods and two non-symmetric branched side-chains, which self-assemble into the first example of a cubic liquid-crystalline phase representing a tetrahedral network of rods with a Pm 3 ‾ n lattice. It is the topological dual to the Weaire-Phelan foam, being the Voronoi tessellation of the A15 sphere packing, from which this network is obtained by Delaunay triangulation.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

Emergence of uniform tilt and π-stacking in triangular liquid crystalline honeycombs

The synclinic tilted organization of specifically designed polyphilic oligo(p-phenylene ethynylene) rods in cylindrical shells around triangular prismatic cells on the <5 nm scale leads to a new kind of liquid crystalline honeycomb composed of helical shells with alternating helix sense. Core fluorination at the outer ring modifies the core-core interactions, thus resulting in triangular arrays with face-to-face π-stacking along the honeycomb.