A Hydrothermally Stable Irreducible Oxide-Modified Pd/MgAl2 O4 Catalyst for Methane Combustion

Tuning Pd species via electronic metal-support interaction for methane combustion

Utilizing catalytic combustion to convert methane (CH4) into CO2 and H2O stands as one of the most effective approaches for mitigating unburnt CH4 emissions from natural gas engines. Supported Pd catalysts have been extensively researched for their role in low-temperature CH4 combustion, with their catalytic activity greatly influenced by metal-support interactions. Surface interaction Pd phases, as a special type of Pd species originating from metal-support interactions on supported Pd catalysts, show controversial catalytic performance in CH4 combustion. Moreover, the impact of electronic metal-support interactions (EMSI, which refers to metal-support interactions associated with electron transfer) remains unclear. Hence, we opted for Ce-Zr solid solutions with different Ce:Zr molar ratios as supports and synthesized a range of supported Pd catalysts with varying EMSI intensities. Characterization revealed that as the oxygen vacancy concentration on the support increased, electron transfer weakened, leading to a higher Pd-O-Ce content, resulting in a lower CH4 activation barrier and better catalytic performance. This study offers a promising approach for regulating EMSI and active Pd species on supported catalysts in practical applications.

Recent advances in abatement of methane and sulfur hexafluoride non-CO2 greenhouse gases under dual-carbon target

With the clarification of the CO2 abatement targets and pathways, the management and control of non-CO2 greenhouse gases (GHGs) have been widely emphasized. As the potent GHGs restricted by the Kyoto Protocol, methane (CH4) and sulfur hexafluoride (SF6) emissions contribute to a significant and increasing share of the total global GHG emissions, resulting in a continuous impact on the environment. Hence, the abatement of CH4 and SF6, the potent GHGs, is a matter of urgency. This paper focuses on recent advances in abatement of lean CH4 and SF6 waste gas. Firstly, a systematic review of abatement technologies for lean CH4 is presented, and two methods, namely, pressure swing adsorption and catalytic combustion, are emphasized. Additionally, the current status of four mainstream methods such as adsorption separation, thermal (catalytic) degradation, photocatalytic degradation, and non-thermal plasma degradation, as well as emerging technologies for SF6 abatement are summarized, and the inherent shortcomings and industrialization potentials of each technology are analyzed from multiple perspectives. This review demonstrates that, under dual-carbon target, existing abatement technologies are inadequate to meet the complex and diverse demands of the power and coal industries. There are many drawbacks for lean CH4 abatement technologies such as high investment in utilization devices, low processing capacity, high operating cost and requirement of high CH4 concentration. Degradation technologies for SF6 waste gas also suffer from low energy efficiency, high investment in catalytic degradation devices, and secondary pollution of degradation products. Based on this, two large-scale processing schemes with high feasibility are proposed. Finally, the current research hotspots, challenges, and future directions are put forward. This review aims to contribute some new perspectives to the abatement efforts of non-CO2 GHGs, so that the dual-carbon target can be realized as soon as possible.

Creating Atomically Iridium-Doped PdOx Nanoparticles for Efficient and Durable Methane Abatement

The urgent environmental concern of methane abatement, attributed to its high global warming potential, necessitates the development of methane oxidation catalysts (MOC) with enhanced low-temperature activity and durability. Herein, an iridium-doped PdOx nanoparticle supported on silicalite-1 zeolite (PdIr/S-1) catalyst was synthesized and applied for methane catalytic combustion. Comprehensive characterizations confirmed the atomically dispersed nature of iridium on the surface of PdOx nanoparticles, creating an Ir4f-O-Pdcus microstructure. The atomically doped Ir transferred more electrons to adjacent oxygen atoms, modifying the electronic structure of PdOx and thus enhancing the redox ability of the PdIr/S-1 catalysts. This electronic modulation facilitated methane adsorption on the Pd site of Ir4f-O-Pdcus, reducing the energy barrier for C-H bond cleavage and thereby increasing the reaction rate for methane oxidation. Consequently, the optimized PdIr0.1/S-1 showed outstanding low-temperature activity for methane combustion (T50 = 276 °C) after aging and maintained long-term stability over 100 h under simulated exhaust conditions. Remarkably, the novel PdIr0.1/S-1 catalyst demonstrated significantly enhanced activity even after undergoing harsh hydrothermal aging at 750 °C for 16 h, significantly outperforming the conventional Pd/Al2O3 catalyst. This work provides valuable insights for designing efficient and durable MOC catalysts, addressing the critical issue of methane abatement.

Redox dynamics and surface structures of an active palladium catalyst during methane oxidation

Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.

Tailoring the Electronic Metal-Support Interactions in Supported Silver Catalysts through Al modification for Efficient Ethylene Epoxidation

Metal-modified catalysts have attracted extraordinary research attention in heterogeneous catalysis due to their enhanced geometric and electronic structures and outstanding catalytic performances. Silver (Ag) possesses necessary active sites for ethylene epoxidation, but the catalyst activity is usually sacrificed to obtain high selectivity towards ethylene oxide (EO). Herein, we report that using Al can help in tailoring the unoccupied 3d state of Ag on the MnO2 support through strong electronic metal-support interactions (EMSIs), overcoming the activity-selectivity trade-off for ethylene epoxidation and resulting in a very high ethylene conversion rate (~100 %) with 90 % selectivity for EO under mild conditions (170 °C and atmospheric pressure). Structural characterization and theoretical calculations revealed that the EMSIs obtained by the Al modification tailor the unoccupied 3d state of Ag, modulating the adsorption of ethylene (C2H4) and oxygen (O2) and facilitating EO desorption, resulting in high C2H4 conversion. Meanwhile, the increased number of positively charge Ag+ lowers the energy barrier for C2H4(ads) oxidation to produce oxametallacycle (OMC), inducing the unexpectedly high EO selectivity. Such an extraordinary electronic promotion provides new promising pathways for designing advanced metal catalysts with high activity and selectivity in selective oxidation reactions.

Thermally stable Ni foam-supported inverse CeAlOx/Ni ensemble as an active structured catalyst for CO2 hydrogenation to methane

Nickel is the most widely used inexpensive active metal center of the heterogeneous catalysts for CO2 hydrogenation to methane. However, Ni-based catalysts suffer from severe deactivation in CO2 methanation reaction due to the irreversible sintering and coke deposition caused by the inevitable localized hotspots generated during the vigorously exothermic reaction. Herein, we demonstrate the inverse CeAlOx/Ni composite constructed on the Ni-foam structure support realizes remarkable CO2 methanation catalytic activity and stability in a wide operation temperature range from 240 to 600 °C. Significantly, CeAlOx/Ni/Ni-foam catalyst maintains its initial activity after seven drastic heating-cooling cycles from RT to 240 to 600 °C. Meanwhile, the structure catalyst also shows water resistance and long-term stability under reaction condition. The promising thermal stability and water-resistance of CeAlOx/Ni/Ni-foam originate from the excellent heat and mass transport efficiency which eliminates local hotspots and the formation of Ni-foam stabilized CeAlOx/Ni inverse composites which effectively anchored the active species and prevents carbon deposition from CH4 decomposition.

Significance of Epitaxial Growth of PtO2 on Rutile TiO2 for Pt/TiO2 Catalysts

TiO2-supported Pt species have been widely applied in numerous critical reactions involving photo-, thermo-, and electrochemical-catalysis for decades. Manipulation of the state of the Pt species in Pt/TiO2 catalysts is crucial for fine-tuning their catalytic performance. Here, we report an interesting discovery showing the epitaxial growth of PtO2 atomic layers on rutile TiO2, potentially allowing control of the states of active Pt species in Pt/TiO2 catalysts. The presence of PtO2 atomic layers could modulate the geometric configuration and electronic state of the Pt species under reduction conditions, resulting in a spread of the particle shape and obtaining a Pt/PtO2/TiO2 structure with more positive valence of Pt species. As a result, such a catalyst exhibits exceptional electrocatalytic activity and stability toward hydrogen evolution reaction, while also promoting the thermocatalytic CO oxidation, surpassing the performance of the Pt/TiO2 catalyst with no epitaxial structure. This novel epitaxial growth of the PtO2 structure on rutile TiO2 in Pt/TiO2 catalysts shows its potential in the rational design of highly active and economical catalysts toward diverse catalytic reactions.

In Situ Synthesis of Encapsulated Pd@silicalite-2 for Highly Stable Methane Catalytic Combustion

Methane emissions from vehicles have made a significant contribution to the greenhouse effect, primarily due to its high global warming potential. Supported noble metal catalysts are widely employed in catalytic combustion of methane in vehicles, but they still face challenges such as inadequate low-temperature activity and deactivation due to sintering under harsh operating conditions. In the present work, a series of encapsulated structured catalysts with palladium nanoparticles confined in hydrophobic silicalite-2 were prepared by an in situ synthesis method. Based on various characterization methods, including XRD, HR-TEM, XPS, H2-TPR, O2-TPD, H2O-TPD, CH4-TPR, Raman, and in situ DRIFTS-MS, it was confirmed that PdOx nanoparticles were mainly encapsulated inside the silicalite-2 zeolite, which further maintained the stability of the nanoparticles under harsh conditions. Specifically, the 3Pd@S-2 sample exhibited high catalytic activity for methane oxidation even after harsh hydrothermal aging at 750 °C for 16 h and maintained long-term stability at 400 °C for 130 h during wet methane combustion. In situ Raman spectroscopy has confirmed that PdOx species act as active species for methane oxidation. During this reaction, methane reacts with PdOx to produce CO2 and H2O, while simultaneously reducing PdOx to metallic Pd species, which is further reoxidized by oxygen to replenish the PdOx catalyst.

Strong Metal-Support Interaction Facilitated Multicomponent Alloy Formation on Metal Oxide Support

Multicomponent alloy (MA) contains a nearly infinite number of unprecedented active sites through entropy stabilization, which is a desired platform for exploring high-performance catalysts. However, MA catalysts are usually synthesized under severe conditions, which induce support structure collapse and further deteriorate the synergy between MA and support. We propose that a strong metal-support interaction (SMSI) could facilitate the formation of MA by establishing a tunnel of oxygen vacancy for metal atom transport under low reduction temperature (400-600 °C), which exemplifies the holistic design of MA catalysts without deactivating supports. PtPdCoFe MA is readily synthesized on anatase TiO2 with the help of SMSI, which exhibits good catalytic activity and stability for methane combustion. This strategy demonstrates excellent universality on various supports and multicomponent alloy compositions. Our work not only reports a holistic synthesis strategy for MA synthesis by synergizing unique properties of reducible oxides and the mixing entropy of alloy but also offers a new insight that SMSI plays a vigorous role in the formation of alloy NPs on reducible oxides.

Differential thermal analysis techniques as a tool for preliminary examination of catalyst for combustion

The need for more economical catalysts for various combustion reactions is continuously driving catalyst development. We present Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) as suitable techniques for fast examination of catalyst activity for combustion reactions. The heat of reaction ΔH_r generated at the catalyst in a combustible atmosphere is the measure for estimating the capability of the catalyst. Present investigations verify the reliability of both methods for the pre-selection of catalysts for further extensive investigations. To simplify the measurements and the result evaluation, a new measurement routine is introduced which is more suitable for rapid catalyst investigation than the conventional approach. For initial investigations, oxidation of 1% methane on a cobalt oxide catalyst was used. First, DTA measurements were performed. The vessel size and the amount of catalyst are considered as factors influencing the thermal signal. Simultaneous mass spectrometry measurements were used to better understand the formation of the DTA response. Comparable DSC investigations were then conducted. Finally, the behavior of catalyst was compared with two commercial palladium/alumina catalysts using DTA and DSC. Our investigations show that DTA and DSC are powerful methods to identify potential catalysts in a fast and reproducible manner, provided that all parameters influencing the thermal signal are kept constant.

Nano-sized alumina supported palladium catalysts for methane combustion with excellent thermal stability

Pd/Al₂O₃ catalysts supported on Al₂O₃ of different particle sizes were synthesized and applied in methane combustion. These catalysts were systematically characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), high resolution-transmission electron microscopy (HR-TEM), high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), H₂-temperature-programmed reduction (H₂-TPR), O₂-temperature-programmed oxidation (O₂-TPO), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS). The characterization results indicated that nano-sized Al₂O₃ enabled the uniform dispersion of palladium nanoparticles, thus contributing to the excellent catalytic performance of these nano-sized Pd/Al₂O₃ catalysts. Among them, Pd/Al₂O₃-nano-10 (Pd/Al₂O₃ supported by alumina with an average particle size of 10 nm) showed superior catalytic activity and stability for methane oxidation under harsh practical conditions. It maintained excellent catalytic performance for methane oxidation for 50 hr and remained stable even after harsh hydrothermal aging in 10 vol.% steam at 800°C for 16 hr. Characterization results revealed that the strong metal-support interactions and physical barriers provided by Al₂O₃-nano-10 suppressed the coalescence ripening of palladium species, and thus contributed to the superior sintering resistance of the Pd/Al₂O₃-nano-10 catalyst.

Modulating the strong metal-support interaction of single-atom catalysts via vicinal structure decoration

Metal-support interaction predominately determines the electronic structure of metal atoms in single-atom catalysts (SACs), largely affecting their catalytic performance. However, directly tuning the metal-support interaction in oxide supported SACs remains challenging. Here, we report a new strategy to subtly regulate the strong covalent metal-support interaction (CMSI) of Pt/CoFe2O4 SACs by a simple water soaking treatment. Detailed studies reveal that the CMSI is weakened by the bonding of H+, generated from water dissociation, onto the interface of Pt-O-Fe, resulting in reduced charge transfer from metal to support and leading to an increase of C-H bond activation in CH4 combustion by more than 50 folds. This strategy is general and can be extended to other CMSI-existed metal-supported catalysts, providing a powerful tool to modulating the catalytic performance of SACs.

Atomic cerium modulated palladium nanoclusters exsolved ferrite catalysts for lean methane conversion

The active and stable palladium (Pd) based catalysts for CH₄ conversion are of great environmental and industrial significance. Herein, we employed N₂ as an optimal activation agent to develop a Pd nanocluster exsolved Ce-incorporated perovskite ferrite catalyst toward lean methane oxidation. Replacing the traditional initiator of H₂, the N₂ was found as an effective driving force to selectively touch off the surface exsolution of Pd nanocluster from perovskite framework without deteriorating the overall material robustness. The catalyst showed an outstanding T₅₀ (temperature of 50% conversion) plummeting down to 350°C, outperforming the pristine and H₂-activated counterparts. Further, the combined theoretical and experimental results also deciphered the crucial role that the atomically dispersed Ce ions played in both construction of active sites and CH₄ conversion. The isolated Ce located at the A-site of perovskite framework facilitated the thermodynamic and kinetics of the Pd exsolution process, lowering its formation temperature and promoting its quantity. Moreover, the incorporation of Ce lowered the energy barrier for cleavage of C─H bond, and was dedicated to the preservation of highly reactive PdO_x moieties during stability measurement. This work successfully ventures uncharted territory of in situ exsolution to provide a new design thinking for a highly performed catalytic interface.

Nickel Hydroxide Nanosheets Prepared by a Direct Manual Grinding Strategy for High-Efficiency Catalytic Combustion of Methane

Nickel hydroxide nanosheets were prepared by a very simple direct manual grinding strategy and then calcined at 200, 300, 400, and 500°. The synthesized samples were tested in lean methane (1.0% CH₄, air balanced) catalytic combustion and subjected to a series of physical and chemical characterizations. The sample calcined at 200 °C (Ni(OH)₂-200) presented a typical nanosheet structure and the best methane catalytic activity in all the samples, which can completely catalyze methane at 400 °C. The crystal structure changed from β-Ni(OH)₂ to NiO at a calcination temperature of 300 °C. The β-Ni(OH)₂ nanosheets began to partially agglomerate into nanoparticles at 400 °C and almost transformed into nanoparticles at 500 °C. Interestingly, the original nanosheet samples Ni(OH)₂-200 and NiO-300 still maintained their morphology and structure although they all went through an activity test at 500 °C in a 1.0% CH₄ atmosphere, which proves that the calcination of nanosheets in a CH₄ atmosphere tended to maintain their nanosheet morphology compared with calcination in the air. Furthermore, through the activity test, X-ray photoelectron spectroscopy results, TPx, and in situ DRIFTS characterization, it was proved that the hydroxyl groups on the Ni(OH)₂-200 and NiO nanosheets were beneficial to the dissociation of methane on the catalyst surface, and the nanosheet structure was also prone to generating more active adsorbed oxygen, so the activation energy of methane was lowered. A methane catalytic mechanism on the Ni(OH)₂ nanosheets and NiO nanoparticles was proposed, which further proved the key role of hydroxyl groups in methane combustion.

Intra-crystalline mesoporous zeolite encapsulation-derived thermally robust metal nanocatalyst in deep oxidation of light alkanes

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications for thermal and environmental catalytic reactions. However, the pore size of the conventional zeolites is usually below 2 nm, and reactants are easily blocked to access the active sites. Herein, a facile in situ mesoporogen-free strategy is developed to design and synthesize palladium (Pd) NPs enveloped in a single-crystalline zeolite (silicalite-1, S-1) with intra-mesopores (termed Pd@IM-S-1). Pd@IM-S-1 exhibited remarkable light alkanes deep oxidation performances, and it should be attributed to the confinement and guarding effect of the zeolite shell and the improvement in mass-transfer efficiency and active metal sites accessibility. The Pd−PdO interfaces as a new active site can provide active oxygen species to the first C−H cleavage of light alkanes. This work exemplifies a promising strategy to design other high-performance intra-crystalline mesoporous zeolite-confined metal/metal oxide catalysts for high-temperature industrial thermal catalysis.

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications. Here the authors develop a facile in situ mesoporogen-free strategy to design and synthesize palladium NPs enveloped within a single-crystalline zeolite with intra-mesopores.

Monolayer Support Control and Precise Colloidal Nanocrystals Demonstrate Metal-Support Interactions in Heterogeneous Catalysts

Electronic and geometric interactions between active and support phases are critical in determining the activity of heterogeneous catalysts, but metal-support interactions are challenging to study. Here, it is demonstrated how the combination of the monolayer-controlled formation using atomic layer deposition (ALD) and colloidal nanocrystal synthesis methods leads to catalysts with sub-nanometer precision of active and support phases, thus allowing for the study of the metal-support interactions in detail. The use of this approach in developing a fundamental understanding of support effects in Pd-catalyzed methane combustion is demonstrated. Uniform Pd nanocrystals are deposited onto Al₂ O₃ /SiO₂ spherical supports prepared with control over morphology and Al₂ O₃ layer thicknesses ranging from sub-monolayer to a ≈4 nm thick uniform coating. Dramatic changes in catalytic activity depending on the coverage and structure of Al₂ O₃ situated at the Pd/Al₂ O₃ interface are observed, with even a single monolayer of alumina contributing an order of magnitude increase in reaction rate. By building the Pd/Al₂ O₃ interface up layer-by-layer and using uniform Pd nanocrystals, this work demonstrates the importance of controlled and tunable materials in determining metal-support interactions and catalyst activity.

A Hydrothermally Stable Single-Atom Catalyst of Pt Supported on High-Entropy Oxide/Al2O3: Structural Optimization and Enhanced Catalytic Activity

A catalyst with high-entropy oxide (HEO)-stabilized single-atom Pt can afford low-temperature activity for catalytic oxidation and remarkable durability even under harsh conditions. However, HEO is easy to harden during sintering, which results in a few defective sites for anchoring single-atom metals. Herein, we present a sol-gel-assisted mechanical milling strategy to achieve a single-atom catalyst of Pt-HEO/Al₂O₃. The strong interaction between HEO and Al₂O₃ effectively inhibits the growth of HEO microparticles, which leads to generation of more surface defects because of the nanoscale effect. Meanwhile, another strong interaction between Pt and HEO stabilizes single-atom Pt on HEO. Temperature-programmed techniques further verify that the reactivity of surface lattice oxygen species is enhanced because of the Pt-O-M bonds on the surface of HEO. Unlike conventional single-atom Pt catalysts, Pt-HEO/Al₂O₃ as a heterogeneous catalyst not only exhibits superior stability against hydrothermal aging but also presents long-term reaction stability for CO catalytic oxidation, which exceeds 540 h. The present work opens a new door for rational design of hydrothermally stable single-atom Pt catalysts, which are highly promising in practical applications.

Highly Active and Stable Palladium Catalysts on Novel Ceria-Alumina Supports for Efficient Oxidation of Carbon Monoxide and Hydrocarbons

Precious metal catalysts with superior low-temperature activity and excellent thermal stability are highly needed in environmental catalysis field. In this work, a novel two-step incipient wetness impregnation (T-IWI) method was developed for the fabrication of a unique and highly stable CeO₂/Al₂O₃ support (CA-T). Pd anchored on CA-T exhibited a much higher low-temperature catalytic activity and superior thermal stability in carbon monoxide (CO) and hydrocarbon (HC) oxidations, compared to Pd anchored on conventional CeO₂/Al₂O₃ (CA), which was prepared by a one-step IWI method. After aging treatment at 800 °C, the CO oxidation rate on Pd/CA-T (1.69 mmol/(g_Pd s)) at 120 °C was 4.1 and 84.5 times of those on Pd/CA (0.41 mmol/(g_Pd s)) and Pd/Al₂O₃ (0.02 mmol/(g_Pd s)), respectively. It was revealed that the CA-T support with well-controlled small CeO₂ particles (ca. 12 nm) possessed abundant defects for Pd anchoring, which created rich Pd-CeO₂ interfaces with strengthened interaction between Pd and CeO₂ where oxygen could be efficiently activated. This resulted in the significantly improved oxidation activity and thermal stability of Pd/CA-T catalysts. The T-IWI method developed herein can be applied as a universal approach to prepare highly stable metal oxide-alumina-based supports, which have broad application in environmental catalyst design, especially for automobile exhaust aftertreatment.

Highly active and stable Ir nanoclusters derived from Ir1/MgAl2O4 single-atom catalysts

Single-atom catalysts (SACs) prepared by the atom trapping method often possess high stability yet have limited advantages regarding catalytic performance due to the strong metal-support interaction. Using these SACs as seeds to develop supported nanoclusters or nanoparticles has, however, been proven to be effective in improving the catalysts' intrinsic activity. Herein, we have prepared extremely stable Ir SACs supported by MgAl₂O₄ via atomic trapping and used them as seeds to fabricate highly active and stable Ir nanocluster catalysts by high-temperature reduction. The activity toward N₂O decomposition increased by more than ten times compared with that of the parent Ir SACs. This study provides a new avenue to design and develop highly active and stable catalysts for industrial use.

Tuning the Reaction Selectivity over MgAl Spinel-Supported Pt Catalyst in Furfuryl Alcohol Conversion to Pentanediols

Catalytic conversion of biomass-derived feedstock to high-value chemicals is of remarkable significance for alleviating dependence on fossil energy resources. MgAl spinel-supported Pt catalysts were prepared and used in furfuryl alcohol conversion. The approaches to tune the reaction selectivity toward pentanediols (PeDs) were investigated and the catalytic performance was correlated to the catalysts’ physicochemical properties based on comprehensive characterizations. It was found that 1–8 wt% Pt was highly dispersed on the MgAl2O4 support as nanoparticles with small sizes of 1–3 nm. The reaction selectivity did not show dependence on the size of Pt nanoparticles. Introducing LiOH onto the support effectively steered the reaction products toward the PeDs at the expense of tetrahydrofurfuryl alcohol (THFA) selectivity. Meanwhile, the major product in PeDs was shifted from 1,5-PeD to 1,2-PeD. The reasons for the PeDs selectivity enhancement were attributed to the generation of a large number of medium-strong base sites on the Li-modified Pt catalyst. The reaction temperature is another effective factor to tune the reaction selectivity. At 230 °C, PeDs selectivity was enhanced to 77.4% with a 1,2-PeD to 1,5-PeD ratio of 3.7 over 4Pt/10Li/MgAl2O4. The Pt/Li/MgAl2O4 catalyst was robust to be reused five times without deactivation.

Relationship between penta-coordinated Al3+ sites in the Al2O3 supports and CH4 combustion activity of Pd/Al2O3 catalysts

Pd/Al₂O₃ catalysts were prepared using various Al₂O₃ supports with different structural features, revealing a significant insight into the methane (CH₄) combustion activity of Pd nanoparticles with the fraction of penta-coordinated Al³⁺ sites in the Al₂O₃ supports.

Exceptionally stable sol-immobilization derived Pd/SBA-15 catalysts for methane combustion

Pd/SBA-15-SI catalysts are more efficient for methane combustion than Pd/SBA-15-IWI catalysts due to anti-sintering property of the catalysts.

Size effects of Pd nanoparticles supported over CeZrPAl for methane oxidation

Pd nanoparticles accompanied with distorted morphology result in considerable active sites and enhance the intrinsic activity for catalytic methane oxidation.