Biomimetic Phthalocyanine-Based Covalent Organic Frameworks with Tunable Pendant Groups for Electrocatalytic CO2 Reduction

Electrocatalytic carbon dioxide reduction reaction (CO2RR) is an effective way of converting CO2 into value-added products using renewable energy, whose activity and selectivity can be in principle maneuvered by tuning the microenvironment near catalytic sites. Here, we demonstrate a strategy for tuning the microenvironment of CO2RR by learning from the natural chlorophyll and heme. Specifically, the conductive covalent organic frameworks (COFs) linked by piperazine serve as versatile supports for single-atom catalysts (SACs), and the pendant groups modified on the COFs can be readily tailored to offer different push-pull electronic effects for tunable microenvironment. As a result, while all the COFs exhibit high chemical structure stability under harsh conditions and good conductivity, the addition of -CH2NH2 can greatly enhance the activity and selectivity of CO2RR. As proven by experimental characterization and theoretical simulation, the electron-donating group (-CH2NH2) not only reduces the surface work function of COF, but also improves the adsorption energy of the key intermediate *COOH, compared with the COFs with electron-withdrawing groups (-CN, -COOH) near the active sites. This work provides insights into the microenvironment modulation of CO2RR electrocatalysts at the molecular level.

Highly Efficient Electrosynthesis of Urea from CO2 and Nitrate by a Metal-Organic Framework with Dual Active Sites

Electrosynthesis of urea from CO2 and NO3 - is a sustainable alternative to energy-intensive industrial processes. The main challenge hindering the progress of this technology lies in the development of advanced electrocatalysts that efficiently utilize abundant, low-cost CO2 and nitrogen sources to yield urea with both high Faradaic efficiency (FE) and current density. In this work, we designed and prepared a new two-dimensional metal-organic framework (MOF), namely PcNi-Fe-O, constructed by nickel-phthalocyanine (NiPc) ligands and square-planar FeO4 nodes, as the electrocatalyst for urea electrosynthesis. PcNi-Fe-O exhibits remarkable performance to yield urea at a high current density of 10.1 mA cm-2 with a high FE(urea) of 54.1 % in a neutral aqueous solution, surpassing those of most reported electrocatalysts. No obvious performance degradation was observed over 20 hours of continuous operation at the current density of 10.1 mA cm-2. By expanding the electrode area to 25 cm2 and operating for 8 hours, we obtained 0.164 g of high-purity urea, underscoring its potential for industrial applications. Mechanism study unveiled the enhanced performance might be ascribed to the synergistic interaction between NiPc and FeO4 sites. Specifically, NH3 produced at the FeO4 site can efficiently migrate and couple with the *NHCOOH intermediate adsorbed on the urea-producing site (NiPc). This synergistic effect results in a lower energy barrier for C-N bond formation than those of the reported catalysts with single active sites.

Sulfur and Wavy-Stacking Boosted Superior Lithium Storage in 2D Covalent Organic Frameworks

2D conjugated covalent organic frameworks (c-COFs) provide an attractive foundation as organic electrodes in energy storage devices, but their storage capability is long hindered by limited ion accessibility within densely π-π stacked interlayers. Herein, two kinds of 2D c-COFs based on dioxin and dithiine linkages are reported, which exhibit distinct in-plane configurations-fully planar and undulated layers. X-ray diffraction analysis reveals wavy square-planar networks in dithiine-bridged COF (COF-S), attributed to curved C─S─C bonds in the dithiine linkage, whereas dioxin-bridged COF (COF-O) features densely packed fully planar layers. Theoretical and experimental results elucidate that the undulated stacking within COF-S possesses an expanded layer distance of 3.8 Å and facilitates effective and rapid Li+ storage, yielding a superior specific capacity of 1305 mAh g-1 at 0.5 A g-1, surpassing that of COF-O (1180 mAh g-1 at 0.5 A g-1). COF-S also demonstrates an admirable cycle life with 80.4% capacity retention after 5000 cycles. As determined, self-expanded wavy-stacking geometry, S-enriched dithiine in COF-S enhances the accessibility and redox activity of Li storage, allowing each phthalocyanine core to store 12 Li+ compared to 8 Li+ in COF-O. These findings underscore the elements and stacking modes of 2D c-COFs, enabling tunable layer distance and modulation of accessible ions.

Na-Ru bimetallic functional sites promote photo-driven CO2 directed conversion into CH4

Recently, there has been a significant increase in interest in using photocatalysis for the energy conversion of polluting gases. In this research, sodium and ruthenium bimetallic functional sites co-modified bismuth tungstate (Ru/Na-Bi2WO6) nanoflower photocatalyst was synthesized via the hydrothermal method. The CO2 reduction products on the Bi2WO6 substrate were CO (1.66 μmol/g/h, 68 %) and CH4 (0.78 μmol/g/h, 32 %). After optimization, a significant change in the CO2 products of the Bi2WO6-based composite material was observed, with CO (0.61 μmol/g/h, 3.6 %) and CH4 (16.1 μmol/g/h, 96.4 %). Results showed that the dominance of CH4 as the main product in the Ru/Na-BWO system is attributed to the effective doping of Na, which generates impurity energy levels composed of oxygen vacancies, lowering the conduction band position of Bi2WO6, thereby suppressing CO generation, and enhancing CH4 selectivity by changing the CO2 activation pathway. The remarkable performance is ascribed to the synergized adsorption and activation of CO2 by the tandem Na+ sites and Ru0 sites. Specifically, the doped Na+ sites play a major role in promoting the adsorption CO2 molecules, while the Ru0 sites play a dominant role in facilitating the activation of the intermediates.

Constructing 2D Phthalocyanine Covalent Organic Framework with Enhanced Stability and Conductivity via Interlayer Hydrogen Bonding as Electrocatalyst for CO2 Reduction

Fabricating COFs-based electrocatalysts with high stability and conductivity still remains a great challenge. Herein, 2D polyimide-linked phthalocyanine COF (denoted as NiPc-OH-COF) is constructed via solvothermal reaction between tetraanhydrides of 2,3,9,10,16,17,23,24-octacarboxyphthalocyaninato nickel(II) and 2,5-diamino-1,4-benzenediol (DB) with other two analogous 2D COFs (denoted as NiPc-OMe-COF and NiPc-H-COF) synthesized for reference. In comparison with NiPc-OMe-COF and NiPc-H-COF, NiPc-OH-COF exhibits enhanced stability, particularly in strong NaOH solvent and high conductivity of 1.5 × 10-3 S m-1 due to the incorporation of additional strong interlayer hydrogen bonding interaction between the O-H of DB and the hydroxy "O" atom of DB in adjacent layers. This in turn endows the NiPc-OH-COF electrode with ultrahigh CO2-to-CO faradaic efficiency (almost 100%) in a wide potential range from -0.7 to -1.1 V versus reversible hydrogen electrode (RHE), a large partial CO current density of -39.2 mA cm-2 at -1.1 V versus RHE, and high turnover number as well as turnover frequency, amounting to 45 000 and 0.76 S-1 at -0.80 V versus RHE during 12 h lasting measurement.

Recent progress on nickel phthalocyanine-based electrocatalysts for CO2 reduction

The electrocatalytic reduction of CO2 to high-value fuels by renewable electricity is a sustainable strategy, which can substitute for fossil fuels and circumvent climate changes induced by elevated CO2 emission levels, making the rational design of versatile electrocatalysts highly desirable. Among all the electrocatalytic materials used in the CO2 reduction reaction, nickel phthalocyanine (NiPc)-based electrocatalysts have attracted considerable attention recently because of their high CO selectivity and catalytic activity. Herein, we review the latest advances in CO2 electroreduction to CO catalyzed by immobilized NiPc and its derivatives on diverse surfaces. Specific strategies, the structure-performance relationship and the CO2-to-CO reaction mechanism of these NiPc-based electrocatalysts are analyzed. Future opportunities and challenges for this series of powerful heterogeneous electrocatalysts are also highlighted.

Efficient Photocatalytic CO2 Reduction in Ellagic Acid-Based Covalent Organic Frameworks

Employing covalent organic frameworks (COFs) for the photocatalytic CO2 reduction reaction (CDRR) to generate high-value chemical fuels and mitigate greenhouse gas emissions represents a sustainable catalytic conversion approach. However, achieving superior photocatalytic CDRR performance is hindered by the challenges of low charge separation efficiency, poor stability, and high preparation costs associated with COFs. Herein, in this work, we utilized perfluorinated metallophthalocyanine (MPcF16) and the organic biomolecule compound ellagic acid (EA) as building blocks to actualize functional covalent organic frameworks (COFs) named EPM-COF (M = Co, Ni, Cu). The designed EPCo-COF, featuring cobalt metal active sites, demonstrated an impressive CO production rate and selectivity in the photocatalytic CO2 reduction reaction (CDRR). Moreover, following alkaline treatment (EPCo-COF-AT), the COF exposed carboxylic acid anion (COO-) and hydroxyl group (OH), thereby enhancing the electron-donating capability of EA. This modification achieved a heightened CO production rate of 17.7 mmol g-1 h-1 with an outstanding CO selectivity of 97.8% in efficient photocatalytic CDRR. Theoretical calculations further illustrated that EPCo-COF-AT functionalized with COO- and OH can effectively alleviate the energy barriers involved in the CDRR process, which facilitates the proton-coupled electron transfer processes and enhances the photocatalytic performance on the cobalt active sites within EPCo-COF-AT.

A two-dimensional covalent organic framework with single-atom manganese for electrochemical NO reduction: a computational study

Covalent organic frameworks (COFs) exhibit great potential for electrocatalysis. Here, using DFT calculations and constant-potential modelling, we report the feasibility of a series of COFs toward NO reduction via regulating their central metal atoms and linking ligands. A COF with single-atom Mn is identified to possess superior activity while maintaining high NH3 selectivity.

Strategies for Enhancing the Photocatalytic and Electrocatalytic Efficiency of Covalent Triazine Frameworks for CO2 Reduction

Converting carbon dioxide (CO2) into fuel and high-value-added chemicals is considered a green and effective way to solve global energy and environmental problems. Covalent triazine frameworks (CTFs) are extensively utilized as an emerging catalyst for photo/electrocatalytic CO2 reduction reaction (CO2RR) recently recognized for their distinctive qualities, including excellent thermal and chemical stability, π-conjugated structure, rich nitrogen content, and a strong affinity for CO2, etc. Nevertheless, single-component CTFs have the problems of accelerated recombination of photoexcited electron-hole pairs and restricted conductivity, which limit their application for photo/electrocatalytic CO2RR. Therefore, emphasis will then summarize the strategies for enhancing the photocatalytic and electrocatalytic efficiency of CTFs for CO2RR in this paper, including atom doping, constructing a heterojunction structure, etc. This review first illustrates the synthesis strategies of CTFs and the advantages of CTFs in the field of photo/electrocatalytic CO2RR. Subsequently, the mechanism of CTF-based materials in photo/electrocatalytic CO2RR is described. Lastly, the challenges and future prospects of CTFs in photo/electrocatalytic CO2RR are addressed, which offers a fresh perspective for the future development of CTFs in photo/electrocatalytic CO2RR.

Dipole moment regulation for enhancing internal electric field in covalent organic frameworks photocatalysts

Covalent organic frameworks (COFs) have recently emerged as a kind of promising photocatalytic platform in addressing the growing threat of trace pollutants in aquatic environments. Along this, we propose a strategy of constructing internal electric field (IEF) in COFs through the dipole moment regulation, which intrinsically facilitates the separation and transfer of photogenerated excitons. Two COFs of BTT-TZ-COF and BTT-TB-COF are developed by linking the electron-donor of benzotrithiophene (BTT) block and the electron-acceptor of triazine (TZ) or tribenzene (TB) block, respectively. DFT calculations demonstrate TZ block with larger dipole moment can achieve more efficient IEF due to the stronger electron-attractive force and hence narrower bandgap. Moreover, featuring the highly-order crystalline structure for accelerating photo-excitons transfer and rich porosity for facilitating the adsorption, BTT-TZ-COF exhibited an excellent universal performance of photocatalytic degradations of various dyes. Specifically, a superior photodegradation efficiency of 99% Rhodamine B (RhB) is achieved within 20 min under the simulated sunlight. Therefore, this convenient construction approach of enhanced IEF in COFs through rational regulation of the dipole moment can be a promising way to realize high photocatalytic activity.

Solvent Effects on Metal-free Covalent Organic Frameworks in Oxygen Reduction Reaction

Binding water molecules to polar sites in covalent organic frameworks (COFs) is inevitable, but the corresponding solvent effects in electrocatalytic process have been largely overlooked. Herein, we investigate the solvent effects on COFs for catalyzing the oxygen reduction reaction (ORR). Our designed COFs incorporated different kinds of nitrogen atoms (imine N, pyridine N, and phenazine N), enabling tunable interactions with water molecules. These interactions play a crucial role in modulating electronic states and altering the catalytic centers within the COFs. Among the synthesized COFs, the one with pyridine N atoms exhibits the highest activity, with characterized by a half-wave potential of 0.78 V and a mass activity of 0.32 A mg-1, which surpass those from other metal-free COFs. Theoretical calculations further reveal that the enhanced activity can be attributed to the stronger binding ability of *OOH intermediates to the carbon atoms adjacent to the pyridine N sites. This work sheds light on the significance of considering solvent effects on COFs in electrocatalytic systems, providing valuable insights into their design and optimization for improved performance.

Novel electrochemical sensing strategy for ultrasensitive detection of tetracycline based on porphyrin/metal phthalocyanine-covalent organic framework

In this work, a novel two-dimensional semiconducting metal covalent organic framework (CuTAPc-TFPP-COF) was synthesized and used as biosensing platform to construct aptasensor for trace detection of tetracycline (TC). The CuTAPc-TFPP-COF integrates the highly conjugated structure, large specific surface area, high porosity, abundant nitrogen functional groups, excellent electrochemical activity, and strong bioaffinity for aptamers, providing abundant active sites to effectively anchor aptamer strands. As a result, the CuTAPc-TFPP-COF-based aptasensor shows high sensitivity for detecting TC via specific recognition between aptamer and TC to form Apt-TC complex. An ultralow detection limit of 59.6 fM is deduced from the electrochemical impedance spectroscopy within a wide linear range of 0.1-100000 pM for TC. The CuTAPc-TFPP-COF-based aptasensor also exhibits good selectivity, reproducibility, stability, regenerability, and excellent applicability for real river water, milk, and pork samples. Therefore, the CuTAPc-TFPP-COF-based aptasensor will be promising for detecting trace harmful antibiotics residues in environmental water and food samples.

Steering lithium and potassium storage mechanism in covalent organic frameworks by incorporating transition metal single atoms

Organic electrodes mainly consisting of C, O, H, and N are promising candidates for advanced batteries. However, the sluggish ionic and electronic conductivity limit the full play of their high theoretical capacities. Here, we integrate the idea of metal-support interaction in single-atom catalysts with π-d hybridization into the design of organic electrode materials for the applications of lithium (LIBs) and potassium-ion batteries (PIBs). Several types of transition metal single atoms (e.g., Co, Ni, Fe) with π-d hybridization are incorporated into the semiconducting covalent organic framework (COF) composite. Single atoms favorably modify the energy band structure and improve the electronic conductivity of COF. More importantly, the electronic interaction between single atoms and COF adjusts the binding affinity and modifies ion traffic between Li/K ions and the active organic units of COFs as evidenced by extensive in situ and ex situ characterizations and theoretical calculations. The corresponding LIB achieves a high reversible capacity of 1,023.0 mA h g-1 after 100 cycles at 100 mA g-1 and 501.1 mA h g-1 after 500 cycles at 1,000 mA g-1. The corresponding PIB delivers a high reversible capacity of 449.0 mA h g-1 at 100 mA g-1 after 150 cycles and stably cycled over 500 cycles at 1,000 mA g-1. This work provides a promising route to engineering organic electrodes.

Amine-functionalized Schiff base covalent organic frameworks supported PdAuIr nanoparticles as high-performance catalysts for formic acid dehydrogenation and hexavalent chromium reduction

Formic acid (FA) holds significant potential as a liquid hydrogen storage medium. However, it is important to improve the reaction rates and extend the practical applications of FA dehydrogenation and Cr(VI) reduction through the development of efficient heterogeneous catalysts. This study reports the synthesis of a uniformly dispersed PdAuIr nanoparticles (NPs) catalyst loaded with amine groups covalent organic frameworks (COFs). The alloyed NPs demonstrated exceptional effectiveness in FA dehydrogenation rate and Cr(VI) reduction. The initial turnover of frequency (TOF) value for FA dehydrogenation without additives was 9970 h-1 at 298 K, the apparent activation energy (Ea) was 30.3 kJ/mol and the rate constant (k) for Cr(VI) reduction was 0.742 min-1. Additionally, it showcased the ability to undergo recycling up to six times with minimal degradation in performance. The results indicate that its remarkable catalytic performance can be attributed primarily to the favorable mass transfer attributes of the aminated COFs supports, the strong metal-support interaction (SMSI), and the synergistic effects among the metals. This study offers a novel perspective on the advancement of efficient and durable heterogeneous catalysts with diverse capabilities, thereby making significant contributions to the fields of energy and environmental preservation.

Charging modulation of the pyridine nitrogen of covalent organic frameworks for promoting oxygen reduction reaction

Covalent organic frameworks (COFs) are ideal templates for constructing metal-free catalysts for the oxygen reduction reaction due to their highly tuneable skeletons and controllable porous channels. However, the development of highly active sites within COFs remains challenging due to their limited electron-transfer capabilities and weak binding affinities for reaction intermediates. Herein, we constructed highly active catalytic centres by modulating the electronic states of the pyridine nitrogen atoms incorporated into the frameworks of COFs. By incorporating different pyridine units (such as pyridine, ionic pyridine, and ionic imidazole units), we tuned various properties including dipole moments, reductive ability, hydrophilicity, and binding affinities towards reaction intermediates. Notably, the ionic imidazole COF (im-PY-BPY-COF) exhibited greater activity than the neutral COF (PY-BPY-COF) and ionic pyridine COF (ion-PY-BPY-COF). Specifically, im-PY-BPY-COF demonstrated a half-wave potential of 0.80 V in 0.1 M KOH, outperforming other metal-free COFs. Theoretical calculations and in situ synchrotron radiation Fourier transform infrared spectroscopy confirmed that the carbon atoms in the ionic imidazole rings improved the activity by facilitating binding of the intermediate OOH* and promoting the desorption of OH*. This study provides new insights into the design of highly active metal-like COF catalysts.

Covalent Organic Frameworks: Opportunities for Rational Materials Design in Cancer Therapy

Nanomedicines are extensively used in cancer therapy. Covalent organic frameworks (COFs) are crystalline organic porous materials with several benefits for cancer therapy, including porosity, design flexibility, functionalizability, and biocompatibility. This review examines the use of COFs in cancer therapy from the perspective of reticular chemistry and function-oriented materials design. First, the modification sites and functionalization methods of COFs are discussed, followed by their potential as multifunctional nanoplatforms for tumor targeting, imaging, and therapy by integrating functional components. Finally, some challenges in the clinical translation of COFs are presented with the hope of promoting the development of COF-based anticancer nanomedicines and bringing COFs closer to clinical trials.

Single-Atom Catalysts on Covalent Organic Frameworks for Energy Applications

Single-atom catalysts (SACs) have been investigated and applied to energy conversion devices. However, issues of metal agglomeration, low metal loading, and substrate stability have hindered realization of the SACs' full potential. Recently, covalent organic framework (COF)-based SACs have emerged as promising materials to enable highly efficient catalytic reactions. Here, we summarize the representative COF-based SACs and their wide application in clean energy devices and conversion reactions, such as hydrogen evolution reaction, carbon dioxide reduction reaction, nitrogen reduction reaction, oxygen reduction reaction, and oxygen evolution reaction. Based on their catalysis conditions, these reactions are categorized into photocatalyzed and electrocatalyzed reactions. We also summarize their design strategies, including heteroatom inclusion, donor-acceptor pairs, pore engineering, interface engineering, etc. Although COF-based SACs are promising, more efforts, such as linkage engineering, functional groups, ionization, multifunctional sites for cocatalyzed systems, etc., could improve them to be the ideal SAC materials. At the end, we provide our perspectives on where the field will proceed in the next 5 years.

Dithiine-linked metalphthalocyanine framework with undulated layers for highly efficient and stable H2O2 electroproduction

Realization of stable and industrial-level H2O2 electroproduction still faces great challenge due large partly to the easy decomposition of H2O2. Herein, a two-dimensional dithiine-linked phthalocyaninato cobalt (CoPc)-based covalent organic framework (COF), CoPc-S-COF, was afforded from the reaction of hexadecafluorophthalocyaninato cobalt (II) with 1,2,4,5-benzenetetrathiol. Introduction of the sulfur atoms with large atomic radius and two lone-pairs of electrons in the C-S-C linking unit leads to an undulated layered structure and an increased electron density of the Co center for CoPc-S-COF according to a series of experiments in combination with theoretical calculations. The former structural effect allows the exposition of more Co sites to enhance the COF catalytic performance, while the latter electronic effect activates the 2e- oxygen reduction reaction (2e- ORR) but deactivates the H2O2 decomposition capability of the same Co center, as a total result enabling CoPc-S-COF to display good electrocatalytic H2O2 production performance with a remarkable H2O2 selectivity of >95% and a stable H2O2 production with a concentration of 0.48 wt% under a high current density of 125 mA cm-2 at an applied potential of ca. 0.67 V versus RHE for 20 h in a flow cell, representing the thus far reported best H2O2 synthesis COFs electrocatalysts.

Crystalline Polyphenylene Covalent Organic Frameworks

The synthesis of crystalline polyphenylene covalent organic frameworks (COFs) was accomplished by linking fluorinated tris(4-acetylphenyl)benzene building units using aldol cyclotrimerization. The structures of the two COFs, reported here, were confirmed by powder X-ray diffraction techniques, Fourier transform infrared, and solid-state 13C CP/MAS NMR spectroscopy. The results showed that the COFs were porous and chemically stable in corrosive, harsh environments for at least 1 week. Accordingly, postsynthetically modified derivatives of these COFs using primary amines showed CO2 uptake from air and flue gas.

Anchoring of Metal Complexes on Au25 Nanocluster for Enhanced Photocoupled Electrocatalytic CO2 Reduction

Atomically precise Au nanoclusters (NCs) with discrete energy levels can be used as photosensitizers for CO2 reduction. However, tight ligand capping of Au NCs hinders CO2 adsorption on its active sites. Here, a new hybrid material is obtained by anchoring of thiol functionalized terpyridine metal complexes (metal=Ru, Ni, Fe, Co) on Au NCs by ligand exchange reactions (LERs). The anchoring of Ru and Ni complexes on Au25 NC (Au25 -Ru and Au25 -Ni) leads to adequate CO2 to CO conversion for photocoupled electrocatalytic CO2 reduction (PECR) in terms of high selectivity, with Faradaic efficiency of CO (FECO ) exceeding 90 % in a wide potential range, remarkable activity (CO production rate up to two times higher than that for pristine Au25 PET18 ) and extremely large turnover frequencies (TOFs, 63012 h-1 at -0.97 V for Au25 -Ru and 69989 h-1 at -1.07 V vs. RHE for Au25 -Ni). Moreover, PECR stability test indicates the excellent long-term stability of the modified NCs in contrast with pristine Au NCs. The present approach offers a novel strategy to enhance PECR activity and selectivity, as well as to improve the stability of Au NCs under light illumination, which paves the way for highly active and stable Au NCs catalysts.

Water-Mediated Hydrogen Bond Network Drives Highly Crystalline Structure Formation of Crown Ether-Based Covalent Organic Framework for Sr Adsorption

Covalent organic frameworks (COFs) with crown ether units have drawn great attention due to their potential applications in adsorption, catalysis, and sensing. However, employing crown ethers to construct COFs is still challenging in light of the flexible nature of macrocycles. Here, a highly crystalline one-dimensional covalent organic framework (1D-18C6-COF) with crown ether units on the ribbon edge was synthesized. The water-mediated hydrogen bond network and π-π stacking hold the 1D COF ribbons together. The combination of experimental and DFT studies demonstrated that the hydrogen bond network plays a crucial role in the structure crystallinity. The 1D-18C6-COF was applied as an adsorbent for strontium, and it exhibited rapid kinetics with good selectivity. In the competitive adsorption experiment, a separation factor of 1900 was achieved, representing one of the largest values for cesium/strontium separation. This work provides new insights into the design and functional exploration of crystalline COFs with flexible units.

2D Covalent Organic Frameworks with Kagome Lattice: Synthesis and Applications

2D covalent organic frameworks with Kagome (kgm) topology are a promising class of crystalline frameworks that possess both triangular and hexagonal pores. These dual-pore structures enable kgm COFs to exhibit unique advantages in selective separation, mass transfer, and targeted drug release. However, the synthesis of 2D kgm COFs has been hindered by the reliance on empirical methods. This review systematically summarizes the conventional macrocycle-to-framework strategy, typical [4+2] co-polymerization synthetic strategy, and bifunctional molecules self-condensation approach for constructing 2D kgm COFs. Factors influencing the formation of kgm lattice are surveyed, such as monomer type, solvent polarity, substrate concentration, etc., and highlight the representative examples on targeted synthesis. Additionally, applications of 2D kgm COFs and relationships between structure and performances are summarized. Finally, key fundamental perspectives are proposed to accelerate the further development of this intriguing material.

Pyrazine-linked Iron-coordinated Tetrapyrrole Conjugated Organic Polymer Catalyst with Spatially Proximate Donor-Acceptor Pairs for Oxygen Reduction in Fuel Cells

Nitrogen-coordinated iron (Fe-N4 ) materials represent the most promising non-noble electrocatalysts for the cathodic oxygen reduction reaction (ORR) of fuel cells. However, molecular-level structure design of Fe-N4 electrocatalyst remains a great challenge. In this study, we develop a novel Fe-N4 conjugated organic polymer (COP) electrocatalyst, which allows for precise design of the Fe-N4 structure, leading to unprecedented ORR performance. At the molecular level, we have successfully organized spatially proximate iron-pyrrole/pyrazine (FePr/Pz) pairs into fully conjugated polymer networks, which in turn endows FePr sites with firmly covalent-bonded matrix, strong d-π electron coupling and highly dense distribution. The resulting pyrazine-linked iron-coordinated tetrapyrrole (Pz-FeTPr) COP electrocatalyst exhibits superior performance compared to most ORR electrocatalysts, with a half-wave potential of 0.933 V and negligible activity decay after 40,000 cycles. When used as the cathode electrocatalyst in a hydroxide exchange membrane fuel cell, the Pz-FeTPr COP achieves a peak power density of ≈210 mW cm-2 . We anticipate the COP based Fe-N4 catalyst design could be an effective strategy to develop high-performance catalyst for facilitating the progress of fuel cells.

Conductive Covalent Organic Frameworks of Polymetallophthalocyanines as a Tunable Platform for Electrocatalysis

Developing an electrocatalyst platform that can control the interplay among activity, selectivity, and stability at atomic precision remains a grand challenge. Here, we have synthesized highly crystalline polymetallophthalocyanines (pMPcs, M = Fe, Co, Ni, and Cu) through the annulation of tetracyanobenzene in the presence of transition metals. The conjugated, conductive, and stable backbones with precisely installed metal sites render pMPcs a unique platform in electrochemical catalysis, where tunability emerges from long-range interactions. The construction of pCoNiPc with a Co and Ni dual-site integrates the advantageous features of pCoPc and pNiPc in electrocatalytic CO2 reduction through electronic communication of the dual-site with an unprecedented long atomic separation of ≥14 chemical bonds. This integration provides excellent activity (current density, j = -16.0 and -100 mA cm-2 in H-type and flow cell, respectively), selectivity (CO Faraday efficiency, FECO = 94%), and stability (>10 h), making it one of the best-performing reticular materials.

Green synthesis of bifunctional phthalocyanine-porphyrin cofs in water for efficient electrocatalytic CO2 reduction coupled with methanol oxidation

Electrocatalytic CO2 reduction (ECR) coupled with organic oxidation is a promising strategy to produce high value-added chemicals and improve energy efficiency. However, achieving the efficient redox coupling reaction is still challenging due to the lack of suitable electrocatalysts. Herein, we designed two bifunctional polyimides-linked covalent organic frameworks (PI-COFs) through assembling phthalocyanine (Pc) and porphyrin (Por) by non-toxic hydrothermal methods in pure water to realize the above catalytic reactions. Due to the high conductivity and well-defined active sites with different chemical environments, NiPc-NiPor COF performs efficient ECR coupled with methanol oxidation reaction (MOR) (Faradaic efficiency of CO (FECO) = 98.12%, partial current densities of CO (jCO) = 6.14 mA cm-2 for ECR, FEHCOOH = 93.75%, jHCOOH = 5.81 mA cm-2 for MOR at low cell voltage (2.1 V) and remarkable long-term stability). Furthermore, experimental evidences and density functional theory (DFT) calculations demonstrate that the ECR process mainly conducts on NiPc unit with the assistance of NiPor, meanwhile, the MOR prefers NiPor conjugating with NiPc. The two units of NiPc-NiPor COF collaboratively promote the coupled oxidation-reduction reaction. For the first time, this work achieves the rational design of bifunctional COFs for coupled heterogeneous catalysis, which opens a new area for crystalline material catalysts.

Covalent organic frameworks: linkage types, synthetic methods and bio-related applications

Covalent organic frameworks (COFs) are composed of small organic molecules linked via covalent bonds, which have tunable mesoporous structure, good biocompatibility and functional diversities. These excellent properties make COFs a promising candidate for constructing biomedical nanoplatforms and provide ample opportunities for nanomedicine development. A systematic review of the linkage types and synthesis methods of COFs is of indispensable value for their biomedical applications. In this review, we first summarize the types of various linkages of COFs and their corresponding properties. Then, we highlight the reaction temperature, solvent and reaction time required by different synthesis methods and show the most suitable synthesis method by comparing the merits and demerits of various methods. To appreciate the cutting-edge research on COFs in bioscience technology, we also summarize the bio-related applications of COFs, including drug delivery, tumor therapy, bioimaging, biosensing and antimicrobial applications. We hope to provide insight into the interdisciplinary research on COFs and promote the development of COF nanomaterials for biomedical applications and their future clinical translations.

Iron/cobalt/nickel regulation for efficient photocatalytic carbon dioxide reduction over phthalocyanine covalent organic frameworks

Using solar photocatalytic CO2 reduction to produce high-value-added products is a promising solution to environmental problems caused by greenhouse gases. Metal phthalocyanine COFs possess a suitable band structure and strong light absorption ability, making them a promising candidate for photocatalytic CO2 reduction. However, the relationship between the electronic structure of these materials and photocatalytic properties, as well as the mechanism of photocatalytic CO2 reduction, is still unclear. Herein, the electronic structure of three MPc-TFPN-COFs (M = Ni, Co, Fe) and the reaction process of CO2 reduction to CO, HCOOH, HCHO and CH3OH were studied using DFT calculations. The calculated results demonstrate that these COFs have a good photo response to visible light and are new potential photocatalytic materials. Three COFs show different reaction mechanisms and selectivity in generating CO2 reduction products. NiPc-TFPN-COFs obtain CO through the reaction pathway of CO2 → COOH → CO, and the energy barrier of the rate-determining step is 2.82 eV. NiPc-TFPN-COFs and FePc-TFPN-COFs generate HCHO through CO2 → COOH → CO → CHO → HCHO, and the energy barrier of the rate step is 2.82 eV and 2.37 eV, respectively. Higher energies are required to produce HCOOH and CH3OH. This work is helping in understanding the mechanism of photocatalytic reduction of CO2 in metallophthalocyanine COFs.

Integrating Enrichment, Reduction, and Oxidation Sites in One System for Artificial Photosynthetic Diluted CO2 Reduction

Artificial photosynthetic diluted CO2 reduction directly driven by natural sunlight is a challenging, but promising way to realize carbon-resources recycling utilization. Herein, a three-in-one photocatalytic system of CO2 enrichment, CO2 reduction and H2 O oxidation sites is designed for diluted CO2 reduction. A Zn-Salen-based covalent organic framework (Zn-S-COF) with oxidation and reductive sites is synthesized; then, ionic liquids (ILs) are loaded into the pores. As a result, [Emim]BF4 @Zn-S-COF shows a visible-light-driven CO2 -to-CO conversion rate of 105.88 µmol g-1 h-1 under diluted CO2 (15%) atmosphere, even superior than most photocatalysts in high concentrations CO2 . Moreover, natural sunlight driven diluted CO2 reduction rate also reaches 126.51 µmol g-1 in 5 h. Further experiments and theoretical calculations reveal that the triazine ring in the Zn-S-COF promotes the activity of H2 O oxidation and CO2 reduction sites, and the loaded ILs provide an enriched CO2 atmosphere, realizing the efficient photocatalytic activity in diluted CO2 reduction.

Photocoupled Electroreduction of CO2 over Photosensitizer-Decorated Covalent Organic Frameworks

Introducing an external visible-light field would be a promising strategy to improve the activity of the electrocatalytic CO2 reduction reaction (CO2RR), but it still remains a challenge due to the short excited-state lifetime of active sites. Herein, Ru(bpy)3Cl2 struts as powerful photosensitive donors were immobilized into the backbones of Co-porphyrin-based covalent organic frameworks (named Co-Bpy-COF-Rux, x is the molar ratio of Ru and Co species, x = 1/2 and 2/3) via coordination bonds, for the photo-coupled CO2RR to produce CO. The optimal Co-Bpy-COF-Ru1/2 displays a high CO Faradaic efficiency of 96.7% at -0.7 V vs reversible hydrogen electrode (RHE) and a CO partial current density of 16.27 mA cm-2 at -1.1 V vs RHE under the assistance of light, both of which were far surpassing the values observed in the dark. The significantly enhanced activity is mainly attributed to the incorporation of a Ru(bpy)3Cl2 donor with long excited-state lifetime and concomitantly giant built-in electric field in Co-Bpy-COF-Ru1/2, which efficiently accelerate the photo-induced electron transfer from Ru(bpy)3Cl2 to the cobalt-porphyrin under the external light. Thus, the cobalt-porphyrin active sites have a longer excited-state lifetime to lower the rate-determining steps' energy occurring during the actual photo-coupled electrocatalytic CO2RR process. This is the first work of porphyrin-based COFs for photo-coupled CO2RR, opening a new frontier for the construction of efficient photo-coupled electrocatalysts.

TiO2@COF Nanowire Arrays: A "Filter Amplifier" Heterojunction Strategy to Reverse the Redox Nature

Surface modification is a promising method to change the surface properties of nanomaterials, but it is limited in enhancing their intrinsic redox nature. In this work, a "filter amplifier" strategy is proposed for the first time to reverse the intrinsic redox nature of materials. This is demonstrated by coating a COF-316 layer with controlled thickness on TiO₂ to form core-sheath nanowire arrays. This unique structure forms a Z-scheme heterojunction to function as "a filter amplifier" which can conceal the intrinsic oxidative sites and increase the extrinsic reductive sites. Consequently, the selective response of TiO₂ is dramatically reversed from reductive ethanol and methanol to oxidative NO₂. Moreover, TiO₂@COF-316 provides remarkably improved sensitivity, response, and recovery speed, as well as unusual anti-humidity properties as compared with TiO₂. This work not only provides a new strategy to rationally modulate the surface chemistry properties of nanomaterials but also opens an avenue to design high-performance electronic devices with a Z-scheme heterojunction.

2D Covalent Organic Frameworks Based on Heteroacene Units

Covalent organic frameworks (COFs) are a unique new class of porous materials that arrange building units into periodic ordered frameworks through strong covalent bonds. Accompanied with structural rigidity and well-defined geometry, heteroacene-based COFs have natural advantages in constructing COFs with high stability and crystallinity. Heteroacene-based COFs usually have high physical and chemical properties, and their extended π-conjugation also leads to relatively low energy gap, effectively promoting π-electron delocalization between network units. Owing to excellent electron-withdrawing or -donating ability, heteroacene units have incomparable advantages in the preparation of donor-acceptor type COFs. Therefore, the physicochemical robust and fully conjugated heteroacene-based COFs solve the problem of traditional COFs lacking π-π interaction and chemical stability. In recent years, significant breakthroughs are made in this field, the choice of various linking modes and building blocks has fundamentally ensured the final applications of COFs. It is of great significance to summarize the heteroacene-based COFs for improving its complexity and controllability. This review first introduces the linkages in heteroacene-based COFs, including reversible and irreversible linkages. Subsequently, some representative building blocks are summarized, and their related applications are especially emphasized. Finally, conclusion and perspectives for future research on heteroacene-based COFs are presented.

Materials design of edge-modified polymeric carbon nitride nanoribbons for the photocatalytic CO2 reduction reaction

Nanoribbon construction and modification with functional groups are important methods to improve the performance of photocatalysts. In this paper, density functional theory (DFT) calculations are applied to assess the electron absorption capacity of different model structures in the photocatalytic CO₂ reduction reaction (CO₂RR), i.e., melon-based carbon nitride nanoribbons (MNRs) and edge-modified melon-based carbon nitride nanoribbons (X-MNRs, X = NO₂, CF₃, CN, CHO, F, Cl, CCH, OH, SH, CH₃, and H). It is found that X-MNRs (X = NO₂, CN, CHO, CCH, OH, and H) have a significantly reduced band gap. Meanwhile, the VBM and CBM are effectively separated with the same optical absorption wavelength range, agreeing with the experimental observations. More importantly, the Gibbs free energy difference of the CO₂RR rate-determining step is greatly reduced in MNRs, CHO-MNRs, CN-MNRs etc. with the formation of CO or HCOOH. The mechanism investigation indicates that the materials design via edge-group modification can optimize the CO₂RR process.

Phenediamine bridging phthalocyanine-based covalent organic framework polymers used as anode materials for lithium-ion batteries

In this study, phenediamine bridging phthalocyanine-based covalent organic framework materials (CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA) with increasingly-widening pore sizes are prepared by reacting cobalt octacarboxylate phthalocyanine with p-phenylenediamine (PDA), benzidine (BDA) and 4,4''-diamino-p-terphenyl (TDA), respectively. The effects of frame size on the morphology structure and its electrochemical properties were explored. X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and transmission electron microscopy (TEM) images show that the pore sizes of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are about 1.7 nm, 2.0 nm and 2.3 nm, respectively, which are close to the simulated results after geometric conformation optimization using Material Studio software. In addition, the specific surface areas of CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are 62, 81 and 137 m² g^-1, respectively. With increase in the frame size, the specific surface area of the corresponding material increases, which is bound to produce different electrochemical behaviors. Consequently, the initial capacities of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes in lithium-ion batteries (LIBs) are 204, 251 and 382 mA h g^-1, respectively. As the charge and discharge processes continue, the active points in the electrode material are continuously activated, leading to a continuous increase in charge and discharge capacities. After 300 cycles, the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes exhibit capacities of 519, 680 and 826 mA h g^-1, respectively, and after 600 cycles, the capacities are maintained at 602, 701 and 865 mA h g^-1, respectively, with a stable capacity retention rate at a current density of 100 mA g^-1. The results show that the large-size frame structure materials have a larger specific surface area and more favorable lithium ion transmission channels, which produce greater active point utilization and smaller charge transmission impedance, thus showing larger charge and discharge capacity and superior rate capability. This study fully confirms that frame size is a key factor affecting the properties of organic frame electrodes, providing design ideas for the development of high-performance organic frame electrode materials.

Electrocatalytic Porphyrin/Phthalocyanine-Based Organic Frameworks: Building Blocks, Coordination Microenvironments, Structure-Performance Relationships

Metal-porphyrins or metal-phthalocyanines-based organic frameworks (POFs), an emerging family of metal-N-C materials, have attracted widespread interest for application in electrocatalysis due to their unique metal-N4 coordination structure, high conjugated π-electron system, tunable components, and chemical stability. The key challenges of POFs as high-performance electrocatalysts are the need for rational design for porphyrins/phthalocyanines building blocks and an in-depth understanding of structure-activity relationships. Herein, the synthesis methods, the catalytic activity modulation principles, and the electrocatalytic behaviors of 2D/3D POFs are summarized. Notably, detailed pathways are given for modulating the intrinsic activity of the M-N4 site by the microenvironments, including central metal ions, substituent groups, and heteroatom dopants. Meanwhile, the topology tuning and hybrid system, which affect the conjugation network or conductivity of POFs, are also considered. Furthermore, the representative electrocatalytic applications of structured POFs in efficient and environmental-friendly energy conversion areas, such as carbon dioxide reduction reaction, oxygen reduction reaction, and water splitting are briefly discussed. Overall, this comprehensive review focusing on the frontier will provide multidisciplinary and multi-perspective guidance for the subsequent experimental and theoretical progress of POFs and reveal their key challenges and application prospects in future electrocatalytic energy conversion systems.

Regulating the Active Sites of Metal-Phthalocyanine at the Molecular Level for Efficient Water Electrolysis: Double Deciphering of Electron-Withdrawing Groups and Bimetallic

Implementing a molecular modulation strategy for metallic phthalocyanines (MPc) without losing the activity of the metal center and inducing a multifunction characteristic in electrocatalytic remains a challenge. Herein, a series of 2D CuCo bimetallic polymerized phthalocyanine modified with strong electron-withdrawing groups (CuCoPc-g, g = F, Cl, Br, NO₂ ) for water oxidation in the alkaline electrolyte is designed and simply synthesized. The experimental results testify that the bimetallic design can perform electronic adjustment once and introduce the second active sites to get bifunctional characteristics, and then the electronic structure of the active center can be regulated by electron-withdrawing groups for a second time to achieve the optimal state. These electrons that transfer in the active center of inner metal can generate space-charged regions and the design of the polymer can stabilize active site region to maintain long-term electrolytic stability and high activity. This study precisely regulates the electronic structure of MPc at the molecular level and provides insight into the multifunctional design of polymeric macrocyclic electrocatalysts.

[2,1,3]-Benzothiadiazole-Spaced Co-Porphyrin-Based Covalent Organic Frameworks for O2 Reduction

Designing N-coordinated porous single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) is a promising approach to achieve enhanced energy conversion due to maximized atom utilization and higher activity. Here, we report two Co(II)-porphyrin/ [2,1,3]-benzothiadiazole (BTD)-based covalent organic frameworks (COFs; Co@rhm-PorBTD and Co@sql-PorBTD), which are efficient SAC systems for O₂ electrocatalysis (ORR). Experimental results demonstrate that these two COFs outperform the mass activity (at 0.85 V) of commercial Pt/C (20%) by 5.8 times (Co@rhm-PorBTD) and 1.3 times (Co@sql-PorBTD), respectively. The specific activities of Co@rhm-PorBTD and Co@sql-PorBTD were found to be 10 times and 2.5 times larger than that of Pt/C, respectively. These COFs also exhibit larger power density and recycling stability in Zn-air batteries compared with a Pt/C-based air cathode. A theoretical analysis demonstrates that the combination of Co-porphyrin with two different BTD ligands affords two crystalline porous electrocatalysts having different d-band center positions, which leads to reactivity differences toward alkaline ORR. The strategy, design, and electrochemical performance of these two COFs offer a pyrolysis-free bottom-up approach that avoids the creation of random atomic sites, significant metal aggregation, or unpredictable structural features.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Porous Polymer Materials for CO2 Capture and Electrocatalytic Reduction

Efficient capture of CO₂ and its conversion into other high value-added compounds by electrochemical methods is an effective way to reduce excess CO₂ in the atmosphere. Porous polymeric materials hold great promise for selective adsorption and electrocatalytic reduction of CO₂ due to their high specific surface area, tunable porosity, structural diversity, and chemical stability. Here, we review recent research advances in this field, including design of porous organic polymers (POPs), porous coordination polymers (PCPs), covalent organic frameworks (COFs), and functional nitrogen-containing polymers for capture and electrocatalytic reduction of CO₂. In addition, key issues and prospects for the optimal design of porous polymers for future development are elucidated. This review is expected to shed new light on the development of advanced porous polymer electrocatalysts for efficient CO₂ reduction.

Boosting Electroreduction of CO2 over Cationic Covalent Organic Frameworks: Hydrogen Bonding Effects of Halogen Ions

We present the first example of charged imidazolium functionalized porphyrin-based covalent organic framework (Co-iBFBim-COF-X) for electrocatalytic CO₂ reduction reaction, where the free anions (e.g., F^- , Cl^- , Br^- , and I^- ) of imidazolium ions nearby the active Co sites can stabilize the key intermediate *COOH and inhibit hydrogen evolution reaction. Thus, Co-iBFBim-COF-X exhibits higher activity than the neutral Co-BFBim-COF, following the trend of F^- <Cl^- <Br^- <I^- . Particularly, the Co-iBFBim-COF-I^- showed nearly 100 % CO₂ selectivity at a low full-cell voltage of 2.3 V, and achieved a high CO₂ partial current density of 52 mA cm^-2 with a turnover frequency of 3018 h^-1 at 2.4 V in the anion membrane electrode assembly, which is 3.57 times larger than that of neutral Co-BFBim-COF. This work provides new insight into the importance of free anions in the stabilization of intermediates and decreasing the local binding energy of H₂ O with active moiety to enhance CO₂ reduction reaction.

Solar driven CO2 reduction with a molecularly engineered periodic mesoporous organosilica containing cobalt phthalocyanine

A molecular cobalt phthalocyanine (CoPc) catalyst has been integrated in an ethylene-bridged periodic mesoporous organosilica (PMO) to fabricate a hybrid material, CoPc-PMO, that catalyses CO₂ reduction to CO in a photocatalytic system using [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine) as a photosensitizer and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. CoPc-PMO displays a Co-based turnover number (TON_CO) of >6000 for CO evolution with >70% CO-selectivity after 4 h irradiation with UV-filtered simulated solar light, and a quantum yield of 1.95% at 467 nm towards CO. This system demonstrates a benchmark TON_CO for immobilised CoPc-based catalysts towards visible light-driven CO₂ reduction.

Ionothermal Synthesis of Fully Conjugated Covalent Organic Frameworks for High-Capacity and Ultrastable Potassium-Ion Batteries

Fully aromatic conjugated covalent organic frameworks (FAC-COFs) with excellent physicochemical stability have been emerging as active semiconductors for diverse potential applications. Developing efficient synthesis methods for fabricating FAC-COFs will significantly facilitate the exploration over their material and photonic/electronic functionalities. Herein, a facile solvent-free strategy is developed for the synthesis of 2D phthalocyanine-based FAC-COFs (FAC-Pc-COFs). Cyclopolymerization of benzo[1,2-b:4,5-b']bis[1,4]benzodioxin-2,3,9,10-tetracarbonitrile (BBTC) and quinoxalino[2',3':9,10]phenanthro[4,5-abc]phenazine-6,7,15,16-tetracarbonitrile (QPPTC) in ZnCl₂  leads to the fast formation and isolation of BB-FAC-Pc-COF and QPP-FAC-Pc-COF, respectively. Powder X-ray diffraction and electron microscopy analysis reveal their crystalline nature with sql topology and AA stacking configuration. Thermogravimetric analysis and immersion experiment indicate their excellent stability. The conductivity test demonstrates their high conductivity of 0.93-1.94 × 10^-4  S cm^-1  owing to the fully π-conjugated electronic structural nature. In particular, the as-prepared FAC-Pc-COFs show high-performance K⁺ storage in potassium-ion batteries due to their excellent conductivity, highly ordered and robust structure, and N/O-rich framework nature. Impressively, QPP-FAC-Pc-COF shows a large reversible capacity of 424 mA h g^-1  after 100 cycles at 50 mA g^-1  and a capacity retention of nearly 100% at 2000 mA g^-1  for over 10 000 cycles.