Engineering Regioselectivity of a P450 Monooxygenase Enables the Synthesis of Ursodeoxycholic Acid via 7β-Hydroxylation of Lithocholic Acid

Achieving Regioselectivity for Remote C-H Activation by Substructure Conformations: an Approach of Paralogous Cytochrome P450 Enzymes

For advanced synthetic intermediates or natural products with multiple unactivated and energetically similar C(sp3)-H bonds, controlling regioselectivity for the C-H activation is particularly challenging. The use of cytochrome P450 enzymes (CYPs) is a promising solution to the 'regioelectivity' challenge in remote C-H activation. Notably, CYPs and organic catalysts share a fundamental principle: they strive to control the distance and geometry between the metal reaction center and the target C-H site. Most structural analyses of the regioselectivity of CYPs are limited to the active pocket, particularly when explaining why regioselectivity could be altered by enzyme engineering through mutagenesis. However, the substructures responsible for forming the active pocket in CYPs are well known to display complex dynamic changes and substrate-induced plasticity. In this context, we highlight a comparative study of the recently reported paralogous CYPs, IkaD and CftA, which achieve different regioselectivity towards the same substrate ikarugamycin by distinct substructure conformations. We propose that substructural conformation-controlled regioselectivity might also be present in CYPs of other natural product biosynthesis pathways, which should be considered when engineering CYPs for regioselective modifications.

Revolutionizing biocatalysis: A review on innovative design and applications of enzyme-immobilized microfluidic devices

Integrating microfluidic devices and enzymatic processes in biocatalysis is a rapidly advancing field with promising applications. This review explores various facets, including applications, scalability, techno-commercial implications, and environmental consequences. Enzyme-embedded microfluidic devices offer advantages such as compact dimensions, rapid heat transfer, and minimal reagent consumption, especially in pharmaceutical optically pure compound synthesis. Addressing scalability challenges involves strategies for uniform flow distribution and consistent residence time. Incorporation with downstream processing and biocatalytic reactions makes the overall process environmentally friendly. The review navigates challenges related to reaction kinetics, cofactor recycling, and techno-commercial aspects, highlighting cost-effectiveness, safety enhancements, and reduced energy consumption. The potential for automation and commercial-grade infrastructure is discussed, considering initial investments and long-term savings. The incorporation of machine learning in enzyme-embedded microfluidic devices advocates a blend of experimental and in-silico methods for optimization. This comprehensive review examines the advancements and challenges associated with these devices, focusing on their integration with enzyme immobilization techniques, the optimization of process parameters, and the techno-commercial considerations crucial for their widespread implementation. Furthermore, this review offers novel insights into strategies for overcoming limitations such as design complexities, laminar flow challenges, enzyme loading optimization, catalyst fouling, and multi-enzyme immobilization, highlighting the potential for sustainable and efficient enzymatic processes in various industries.

Enhancing substrate specificity of microbial transglutaminase for precise nanobody labeling

Streptomyces mobaraenesis transglutaminase (smTG) can be used for site-specific labeling of proteins with chemical groups. Here, we explored the use of modified smTG for the biosynthesis of nanobody-fluorophore conjugates (NFC). smTG catalyzes the conjugation of acyl donors containing glutamine with lysine-containing acceptors, which can lead to non-specific cross-linking. To achieve precise site-specific labeling, we employed molecular docking and virtual mutagenesis to redesign the enzyme's substrate specificity towards the peptide GGGGQR, a non-preferred acyl donor for smTG. Starting with a thermostable and highly active smTG variant (TGm2), we identified that single mutations G250H and Y278E significantly enhanced activity against GGGGQR, increasing it by 41 % and 1.13-fold, respectively. Notably, the Y278E mutation dramatically shifted the enzyme's substrate preference, with the activity ratio against GGGGQR versus the standard substrate CBZ-Gln-Gly rising from 0.05 to 0.93. In case studies, we used nanobodies 1C12 and 7D12 as labeling targets, catalyzing their conjugation with a synthetic fluorophore via smTG variants. Nanobodies fused with GGGGQR were successfully site-specifically labeled by TGm2-Y278E, in contrast to non-specific labeling observed with other variants. These results suggest that engineering smTG for site-specific labeling is a promising approach for the biosynthesis of antibody-drug conjugates.

Binding of steroid substrates reveals the key to the productive transition of the cytochrome P450 OleP

OleP is a bacterial cytochrome P450 involved in oleandomycin biosynthesis as it catalyzes regioselective epoxidation on macrolide intermediates. OleP has recently been reported to convert lithocholic acid (LCA) into murideoxycholic acid through a highly regioselective reaction and to unspecifically hydroxylate testosterone (TES). Since LCA and TES mainly differ by the substituent group at the C17, here we used X-ray crystallography, equilibrium binding assays, and molecular dynamics simulations to investigate the molecular basis of the diverse reactivity observed with the two steroids. We found that the differences in the structure of TES and LCA affect the capability of these molecules to directly form hydrogen bonds with N-terminal residues of OleP internal helix I. The establishment of these contacts, by promoting the bending of helix I, fosters an efficient trigger of the open-to-closed structural transition that occurs upon substrate binding to OleP and contributes to the selectivity of the subsequent monooxygenation reaction.

A fungal P450 enzyme from Fusarium equiseti HG18 with 7β-hydroxylase activity in biosynthesis of ursodeoxycholic acid

Cytochrome P450 enzyme with 7β-hydroxylation capacity has attracted widespread attentions due to the vital roles in the biosynthesis of ursodeoxycholic acid (UDCA), a naturally active molecule for the treatment of liver and gallbladder diseases. In this study, a novel P450 hydroxylase (P450FE) was screen out from Fusarium equiseti HG18 and identified by a combination of genome and transcriptome sequencing, as well as heterologous expression in Pichia pastoris. The biotransformation of lithocholic acid (LCA) by whole cells of recombinant Pichia pastoris further confirmed the C7β-hydroxylation with 5.2% UDCA yield. It was firstly identified a fungal P450 enzyme from Fusarium equiseti HG18 with the capacity to catalyze the LCA oxidation producing UDCA. The integration of homology modeling and molecular docking discovered the substrate binding to active pockets, and the key amino acids in active center were validated by site-directed mutagenesis, and revealed that Q112, V362 and L363 were the pivotal residues of P450FE in regulating the activity and selectivity of 7β-hydroxylation. Specifically, V362I mutation exhibited 2.6-fold higher levels of UDCA and higher stereospecificity than wild-type P450FE. This advance provided guidance for improving the catalytic efficiency and selectivity of P450FE in LCA hydroxylation, indicative of the great potential in green synthesis of UDCA from biologically toxic LCA.

Recent developments in the enzymatic modifications of steroid scaffolds

Steroids are an important family of bioactive compounds. Steroid drugs are renowned for their multifaceted pharmacological activities and are the second-largest category in the global pharmaceutical market. Recent developments in biocatalysis and biosynthesis have led to the increased use of enzymes to enhance the selectivity, efficiency, and sustainability for diverse modifications of steroids. This review discusses the advancements achieved over the past five years in the enzymatic modifications of steroid scaffolds, focusing on enzymatic hydroxylation, reduction, dehydrogenation, cascade reactions, and other modifications for future research on the synthesis of novel steroid compounds and related drugs, and new therapeutic possibilities.

Novel cytochrome P450s for various hydroxylation of steroids from filamentous fungi

Hydroxylated steroids are value-added products with diverse biological activities mediated by cytochrome P450 enzymes, however, few has been thoroughly characterized in fungi. This study introduces a rapid identification strategy for filamentous fungi P450 enzymes through transcriptome and bioinformatics analysis. Five novel enzymes (CYP68J5, CYP68L10, CYP68J3, CYP68N1 and CYP68N3) were identified and characterized in Saccharomyces cerevisiae or Aspergillus oryzae. Molecular docking and dynamics simulations were employed to elucidate hydroxylation preferences of CYP68J5 (11α, 7α bihydroxylase) and CYP68N1 (11α hydroxylase). Additionally, redox partners (cytochrome P450 reductase and cytochrome b5) and ABC transporter were co-expressed with CYP68N1 to enhance 11α-OH-androstenedione (11α-OH-4AD) production. The engineered cell factory, co-expressing CPR1 and CYP68N1, achieved a significant increase of 11α-OH-4AD production, reaching 0.845 g·L-1, which increased by 14 times compared to the original strain. This study provides a comprehensive approach for identifying and implementing novel cytochrome P450 enzymes, paving the way for sustainable production of steroidal products.

Microbial P450 repertoire (P450ome) and its application feasibility in pharmaceutical industry, chemical industry, and environmental protection

Cytochrome P450s (CYPs) are heme-thiolated enzymes that catalyze the oxidation of C-H bonds in a regio- and stereo-selective manner. CYPs are widely present in the biological world. With the completion of more biological genome sequencing, the number and types of P450 enzymes have increased rapidly. P450 in microorganisms is easy to clone and express, rich in catalytic types, and strong in substrate adaptability, which has good application potential. Although the number of P450 enzymes found in microorganisms is huge, the function of most of the microorganism P450s has not been studied, and it contains a large number of excellent biocatalysts to be developed. This review is based on the P450 groups in microorganisms. First, it reviews the distribution of P450 groups in different microbial species, and then studies the application of microbial P450 enzymes in the pharmaceutical industry, chemical industry and environmental pollutant treatment in recent years. And focused on the application fields of P450 enzymes of different families to guide the selection of suitable P450s from the huge P450 library. In view of the current shortcomings of microbial P450 in the application process, the final solution is the most likely to assist the application of P450 enzymes in large-scale, that is, whole cell transformation combined with engineering, fusion P450 combined with immobilization technology.

A Mechanistic Understanding of the Distinct Regio- and Chemoselectivity of Multifunctional P450s by Structural Comparison of IkaD and CftA Complexed with Common Substrates

Regio- and chemoselective C-H activation at multi-positions of a single molecule is fascinating but chemically challenging. The homologous cytochrome P450 enzymes IkaD and CftA catalyze multiple C-H oxidations on the same polycyclic tetramate macrolactam (PoTeM) ikarugamycin, with distinct regio- and chemoselectivity. Herein we provide mechanistic understanding of their functional differences by solving crystal structures of IkaD and CftA in complex with ikarugamycin and unnatural substrates. Distinct conformations of the F/G region in IkaD and CftA are found to differentiate the orientation of PoTeM substrates, by causing different binding patterns with polar moieties to determine site selection, oxidation order, and chemoselectivity. Fine-tuning the polar subpocket altered the regioselectivity of IkaD, indicating that substrate re-orientation by mutating residues distal to the oxidation site could serve as an important method in future engineering of P450 enzymes.

Bacterial cytochrome P450 enzymes: Semi-rational design and screening of mutant libraries in recombinant Escherichia coli cells

Bacterial cytochromes P450 (P450s) have been recognized as attractive targets for biocatalysis and protein engineering. They are soluble cytosolic enzymes that demonstrate higher stability and activity than their membrane-associated eukaryotic counterparts. Many bacterial P450s possess broad substrate spectra and can be produced in well-known expression hosts like Escherichia coli at high levels, which enables quick and convenient mutant libraries construction. However, the majority of bacterial P450s interacts with two auxiliary redox partner proteins, which significantly increase screening efforts. We have established recombinant E. coli cells for screening of P450 variants that rely on two separate redox partners. In this chapter, a case study on construction of a selective P450 to synthesize a precursor of several chemotherapeutics, (-)-podophyllotoxin, is described. The procedure includes co-expression of P450 and redox partner genes in E. coli with subsequent whole-cell conversion of the substrate (-)-deoxypodophyllotoxin in 96-deep-well plates. By omitting the chromatographic separation while measuring mass-to-charge ratios specific for the substrate and product via MS in so-called multiple injections in a single experimental run (MISER) LC/MS, the analysis time could be drastically reduced to roughly 1 min per sample. Screening results were verified by using isolated P450 variants and purified redox partners.

Optimization and Impurity Control Strategy for Lithocholic Acid Production Using Commercially Plant-Sourced Bisnoralcohol

In this study, lithocholic acid (LCA) was prepared using commercially available plant-sourced bisnoralcohol (BA), and the overall yield of the product was 70.6% for five steps. To prevent process-related impurities, the isomerizations of catalytic hydrogenation in the C4-C5 double bond and reduction of the 3-keto group were optimized. The double bond reduction isomerization was improved (5β-H:5α-H = 97:3) using palladium-copper nanowires (Pd-Cu NWs) instead of Pd/C. The reduction of the 3-keto group was 100% converted to a 3α-OH product by 3α-hydroxysteroid dehydrogenase/carbonyl reductase catalysis. Moreover, the impurities during the optimization process were comprehensively studied. Compared with the reported synthesis methods, our developed method significantly improved the isomer ratio and overall yield, affording ICH-grade quality of LCA, and it is more cost-effective and suitable for large-scale production of LCA.

Molecular Dynamics of Iron Porphyrin-Catalyzed C-H Hydroxylation of Ethylbenzene

Quasi-classical molecular dynamics (MD) simulations were carried out to study the mechanism of iron porphyrin-catalyzed hydroxylation of ethylbenzene. The hydrogen atom abstraction from ethylbenzene by iron-oxo species is the rate-determining step, which generates the radical pair of iron-hydroxo species and the benzylic radical. In the subsequent radical rebound step, the iron-hydroxo species and benzylic radical recombine to form the hydroxylated product, which is barrierless on the doublet energy surface. In the gas-phase quasi-classical MD study on the doublet energy surface, 45% of the reactive trajectories lead directly to the hydroxylated product, and this increases to 56% in implicit solvent model simulations. The percentage of reactive trajectories leading to the separated radical pair is 98-100% on high-spin (quartet/sextet) energy surfaces. The low-spin state reactivity dominates in the hydroxylation of ethylbenzene, which is dynamically both concerted and stepwise, since the time gap between C-H bond cleavage and C-O bond formation ranges from 41 to 619 fs. By contrast, the high-spin state catalysis is an energetically stepwise process, which has a negligible contribution to the formation of hydroxylation products.

Development of HPLC-CAD method for simultaneous quantification of nine related substances in ursodeoxycholic acid and identification of two unknown impurities by HPLC-Q-TOF-MS

Ursodeoxycholic acid has gained increasing attention due to its recent discovery of the preventive effect on SARS-CoV-2 infection. Ursodeoxycholic acid has been included in various pharmacopoeias as an old drug, and the latest European Pharmacopoeia lists nine potential related substances (impurities A~I). However, existing methods in pharmacopoeias and literature can only quantify up to five of these impurities simultaneously, and the sensitivity is inadequate, as the impurities are isomers or cholic acid analogues lacking chromophores. Herein, a novel gradient RP-HPLC method coupled to charged aerosol detection (CAD) was developed and validated for the simultaneous separation and quantification of the nine impurities in ursodeoxycholic acid. The method proved sensitive and allowed the quantification of the impurities as low as 0.02%. Relative correction factors of the nine impurities were all within the range of 0.8~1.2 in the gradient mode by optimizing chromatographic conditions and CAD parameters. In addition, this RP-HPLC method is fully compatible with LC-MS due to the volatile additives and high percentage of the organic phase, which can be directly used for the identification of impurities. The newly developed HPLC-CAD method was successfully applied to commercial bulk drug samples, and two unknown impurities were identified by HPLC-Q-TOF-MS. The effect of CAD parameters on the linearity and correction factors was also discussed in this study. Overall, the established HPLC-CAD method can improve the methods in current pharmacopoeias and literature and contributes to understanding the impurity profile for process improvement.

Efficient heterologous expression of cytochrome P450 enzymes in microorganisms for the biosynthesis of natural products

Natural products, a chemically and structurally diverse class of molecules, possess a wide spectrum of biological activities, have been used therapeutically for millennia, and have provided many lead compounds for the development of synthetic drugs. Cytochrome P450 enzymes (P450s, CYP) are widespread in nature and are involved in the biosynthesis of many natural products. P450s are heme-containing enzymes that use molecular oxygen and the hydride donor NAD(P)H (coupled via enzymic redox partners) to catalyze the insertion of oxygen into C-H bonds in a regio- and stereo-selective manner, effecting hydroxylation and several other reactions. With the rapid development of systems biology, numerous novel P450s have been identified for the biosynthesis of natural products, but there are still several challenges to the efficient heterologous expression of active P450s. This review covers recent developments in P450 research and development, including the properties and functions of P450s, discovery and mining of novel P450s, modification and screening of P450 mutants, improved heterologous expression of P450s in microbial hosts, efficient whole-cell transformation with P450s, and current applications of P450s for the biosynthesis of natural products. This resource provides a solid foundation for the application of highly active and stable P450s in microbial cell factories to biosynthesize natural products.

Biological synthesis of ursodeoxycholic acid

Ursodeoxycholic acid (UDCA) is a fundamental treatment drug for numerous hepatobiliary diseases that also has adjuvant therapeutic effects on certain cancers and neurological diseases. Chemical UDCA synthesis is environmentally unfriendly with low yields. Biological UDCA synthesis by free-enzyme catalysis or whole-cell synthesis using inexpensive and readily available chenodeoxycholic acid (CDCA), cholic acid (CA), or lithocholic acid (LCA) as substrates is being developed. The free enzyme-catalyzed one-pot, one-step/two-step method uses hydroxysteroid dehydrogenase (HSDH); whole-cell synthesis, mainly uses engineered bacteria (mainly Escherichia coli) expressing the relevant HSDHs. To further develop these methods, HSDHs with specific coenzyme dependence, high enzyme activity, good stability, and high substrate loading concentration, P450 monooxygenase with C-7 hydroxylation activity and engineered strain harboring HSDHs must be exploited.

H2O2-Driven Hydroxylation of Steroids Catalyzed by Cytochrome P450 CYP105D18: Exploration of the Substrate Access Channel

CYP105D18 supports H2O2 as an oxygen surrogate for catalysis well and shows high H2O2 resistance capacity. We report the hydroxylation of different steroids using H2O2 as a cosubstrate. Testosterone was regiospecifically hydroxylated to 2β-hydroxytestosterone. Based on the experimental data and molecular docking, we predicted that hydroxylation of methyl testosterone and nandrolone would occur at position 2 in the A-ring, while hydroxylation of androstenedione and adrenosterone was predicted to occur in the B-ring. Further, structure-guided rational design of the substrate access channel was performed with the mutagenesis of residues S63, R82, and F184. Among the mutants, S63A showed a marked decrease in product formation, while F184A showed a significant increase in product formation in testosterone, nandrolone, methyl testosterone, androstenedione, and adrenosterone. The catalytic efficiency (kcat/Km) toward testosterone was increased 1.36-fold in the F184A mutant over that in the wild-type enzyme. These findings might facilitate the potential use of CYP105D18 and further engineering to establish the basis of biotechnological applications. IMPORTANCE The structural modification of steroids is a challenging chemical reaction. Modifying the core ring and the side chain improves the biological activity of steroids. In particular, bacterial cytochrome P450s are used as promiscuous enzymes for the activation of nonreactive carbons of steroids. In the present work, we reported the H2O2-mediated hydroxylation of steroids by CYP105D18, which also overcomes the use of expensive cofactors. Further, exploring the substrate access channel and modifying the bulky amino acid F184A increase substrate conversion while modifying the substrate recognizing amino acid S63 markedly decreases product formation. Exploring the substrate access channel and the rational design of CYP105D18 can improve the substrate conversion, which facilitates the engineering of P450s for industrial application.

Silver-Free C-H Activation: Strategic Approaches towards Realizing the Full Potential of C-H Activation in Sustainable Organic Synthesis

The activation of carbon-hydrogen bonds is considered as one of the most attractive techniques in synthetic organic chemistry because it bears the potential to shorten synthetic routes as well as to produce complementary product scopes compared to traditional synthetic strategies. However, many current methods employ silver salts as additives, leading to stoichiometric metal waste and thereby preventing the full potential of C-H activation to be exploited. Therefore, the development of silver-free protocols has recently received increasing attention. Mechanistically, silver can serve various roles in C-H activation and thus, avoiding the use of silver requires different approaches based on the role it serves in a given process. In this Review, we present the comparison of silver-based and silver-free methods. Focusing on the strategic approaches to develop silver-free C-H activation, we provide the reader with the means to develop sustainable methods for C-H activation.

Rational development of mycobacteria cell factory for advancing the steroid biomanufacturing

Steroidal resource occupies a vital proportion in the pharmaceutical industry attributing to their important therapeutic effects on fertility, anti-inflammatory and antiviral activities. Currently, microbial transformation from phytosterol has become the dominant strategy of steroidal drug intermediate synthesis that bypasses the traditional chemical route. Mycobacterium sp. serve as the main industrial microbial strains that are capable of introducing selective functional modifications of steroidal intermediate, which has become an indispensable platform for steroid biomanufacturing. By reviewing the progress in past two decades, the present paper concentrates mainly on the microbial rational modification aspects that include metabolic pathway editing, key enzymes engineering, material transport pathway reinforcement, toxic metabolic intermediates removal and byproduct reconciliation. In addition, progress on omics analysis and direct genetic manipulation are summarized and classified that may help reform the industrial hosts with more efficiency. The paper provides an insightful present for steroid biomanufacturing especially on the current trends and prospects of mycobacteria.

Oxygenating Biocatalysts for Hydroxyl Functionalisation in Drug Discovery and Development

C-H oxyfunctionalisation remains a distinct challenge for synthetic organic chemists. Oxygenases and peroxygenases (grouped here as "oxygenating biocatalysts") catalyse the oxidation of a substrate with molecular oxygen or hydrogen peroxide as oxidant. The application of oxygenating biocatalysts in organic synthesis has dramatically increased over the last decade, producing complex compounds with potential uses in the pharmaceutical industry. This review will focus on hydroxyl functionalisation using oxygenating biocatalysts as a tool for drug discovery and development. Established oxygenating biocatalysts, such as cytochrome P450s and flavin-dependent monooxygenases, have widely been adopted for this purpose, but can suffer from low activity, instability or limited substrate scope. Therefore, emerging oxygenating biocatalysts which offer an alternative will also be covered, as well as considering the ways in which these hydroxylation biotransformations can be applied in drug discovery and development, such as late-stage functionalisation (LSF) and in biocatalytic cascades.

One-pot biosynthesis of 7β-hydroxyandrost-4-ene-3,17-dione from phytosterols by cofactor regeneration system in engineered mycolicibacterium neoaurum

Background

7β-hydroxylated steroids (7β-OHSt) possess significant activities in anti-inflammatory and neuroprotection, and some of them have been widely used in clinics. However, the production of 7β-OHSt is still a challenge due to the lack of cheap 7β-hydroxy precursor and the difficulty in regio- and stereo-selectively hydroxylation at the inert C7 site of steroids in industry. The conversion of phytosterols by Mycolicibacterium species to the commercial precursor, androst-4-ene-3,17-dione (AD), is one of the basic ways to produce different steroids. This study presents a way to produce a basic 7β-hydroxy precursor, 7β-hydroxyandrost-4-ene-3,17-dione (7β-OH-AD) in Mycolicibacterium, for 7β-OHSt synthesis.

Results

A mutant of P450-BM3, mP450-BM3, was mutated and engineered into an AD producing strain for the efficient production of 7β-OH-AD. The enzyme activity of mP450-BM3 was then increased by 1.38 times through protein engineering and the yield of 7β-OH-AD was increased from 34.24 mg L^− 1 to 66.25 mg L^− 1. To further enhance the performance of 7β-OH-AD producing strain, the regeneration of nicotinamide adenine dinucleotide phosphate (NADPH) for the activity of mP450-BM3-0 was optimized by introducing an NAD kinase (NADK) and a glucose-6-phosphate dehydrogenase (G6PDH). Finally, the engineered strain could produce 164.52 mg L^− 1 7β-OH-AD in the cofactor recycling and regeneration system.

Conclusions

This was the first report on the one-pot biosynthesis of 7β-OH-AD from the conversion of cheap phytosterols by an engineered microorganism, and the yield was significantly increased through the mutation of mP450-BM3 combined with overexpression of NADK and G6PDH. The present strategy may be developed as a basic industrial pathway for the commercial production of high value products from cheap raw materials.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01786-5.

Point Mutations at a Key Site Alter the Cytochrome P450 OleP Structural Dynamics

Substrate binding to the cytochrome P450 OleP is coupled to a large open-to-closed transition that remodels the active site, minimizing its exposure to the external solvent. When the aglycone substrate binds, a small empty cavity is formed between the I and G helices, the BC loop, and the substrate itself, where solvent molecules accumulate mediating substrate-enzyme interactions. Herein, we analyzed the role of this cavity in substrate binding to OleP by producing three mutants (E89Y, G92W, and S240Y) to decrease its volume. The crystal structures of the OleP mutants in the closed state bound to the aglycone 6DEB showed that G92W and S240Y occupied the cavity, providing additional contact points with the substrate. Conversely, mutation E89Y induces a flipped-out conformation of this amino acid side chain, that points towards the bulk, increasing the empty volume. Equilibrium titrations and molecular dynamic simulations indicate that the presence of a bulky residue within the cavity impacts the binding properties of the enzyme, perturbing the conformational space explored by the complexes. Our data highlight the relevance of this region in OleP substrate binding and suggest that it represents a key substrate-protein contact site to consider in the perspective of redirecting its activity towards alternative compounds.

Enzymatic strategies for asymmetric synthesis

Enzymes, at the turn of the 21st century, are gaining a momentum. Especially in the field of synthetic organic chemistry, a broad variety of biocatalysts are being applied in an increasing number of processes running at up to industrial scale. In addition to the advantages of employing enzymes under environmentally friendly reaction conditions, synthetic chemists are recognizing the value of enzymes connected to the exquisite selectivity of these natural (or engineered) catalysts. The use of hydrolases in enantioselective protocols paved the way to the application of enzymes in asymmetric synthesis, in particular in the context of biocatalytic (dynamic) kinetic resolutions. After two decades of impressive development, the field is now mature to propose a panel of catalytically diverse enzymes for (i) stereoselective reactions with prochiral compounds, such as double bond reduction and bond forming reactions, (ii) formal enantioselective replacement of one of two enantiotopic groups of prochiral substrates, as well as (iii) atroposelective reactions with noncentrally chiral compounds. In this review, the major enzymatic strategies broadly applicable in the asymmetric synthesis of optically pure chiral compounds are presented, with a focus on the reactions developed within the past decade.

Recent trends in biocatalysis

Biocatalysis has undergone revolutionary progress in the past century. Benefited by the integration of multidisciplinary technologies, natural enzymatic reactions are constantly being explored. Protein engineering gives birth to robust biocatalysts that are widely used in industrial production. These research achievements have gradually constructed a network containing natural enzymatic synthesis pathways and artificially designed enzymatic cascades. Nowadays, the development of artificial intelligence, automation, and ultra-high-throughput technology provides infinite possibilities for the discovery of novel enzymes, enzymatic mechanisms and enzymatic cascades, and gradually complements the lack of remaining key steps in the pathway design of enzymatic total synthesis. Therefore, the research of biocatalysis is gradually moving towards the era of novel technology integration, intelligent manufacturing and enzymatic total synthesis.

Enabling highly (R)-enantioselective epoxidation of styrene by engineering unique non-natural P450 peroxygenases

Unlike the excellent (S)-enantioselective epoxidation of styrene performed by natural styrene monooxygenases (ee > 99%), the (R)-enantioselective epoxidation of styrene has not yet achieved a comparable efficiency using natural or engineered oxidative enzymes. This report describes the H₂O₂-dependent (R)-enantioselective epoxidation of unfunctionalized styrene and its derivatives by site-mutated variants of a unique non-natural P450BM3 peroxygenase, working in tandem with a dual-functional small molecule (DFSM). The observed (R)-enantiomeric excess (ee) of styrene epoxidation is up to 99% with a turnover number (TON) of 918 by the best enantioselective mutant F87A/T268I/L181Q, while the best active mutant F87A/T268I/V78A/A184L (with 98% ee) gave a catalytic TON of 4350, representing the best activity of a P450 peroxygenase towards styrene epoxidation to date. Following this approach, a set of styrene derivatives, such as o-, m-, p-chlorostyrenes and fluorostyrenes, could also be epoxidized with modest to very good TONs (362–3480) and high (R)-enantioselectivities (95–99% ee). The semi-preparative scale synthesis of (R)-styrene oxide performed at 0 °C with high conversion, maintaining enantioselectivity, and moderate isolated yields, further suggests the potential application of the current P450 enzymatic system in styrene epoxidation. This study indicates that the synergistic use of protein engineering and an exogenous DFSM constitutes an efficient strategy to control the enantioselectivity of styrene epoxidation, thus substantially expanding the chemical scope of P450 enzymes as useful bio-oxidative catalysts.

H₂O₂-dependent epoxidation of unfunctionalized styrenes is achieved with high (R)-enantioselectivity and moderate to excellent TONs by combining site-mutated variants of cytochrome P450BM3 monooxygenase and a dual-functional small molecule (DFSM).