Silver Single-Atom Catalyst for Efficient Electrochemical CO2 Reduction Synthesized from Thermal Transformation and Surface Reconstruction

Regulating the Critical Intermediates of Dual-Atom Catalysts for CO2 Electroreduction

Electrocatalysis is a very attractive way to achieve a sustainable carbon cycle by converting CO2 into organic fuels and feedstocks. Therefore, it is crucial to design advanced electrocatalysts by understanding the reaction mechanism of electrochemical CO2 reduction reaction (eCO2RR) with multiple electron transfers. Among electrocatalysts, dual-atom catalysts (DACs) are promising candidates due to their distinct electronic structures and extremely high atomic utilization efficiency. Herein, the eCO2RR mechanism and the identification of intermediates using advanced characterization techniques, with a particular focus on regulating the critical intermediates are systematically summarized. Further, the insightful understanding of the functionality of DACs originates from the variable metrics of electronic structures including orbital structure, charge distribution, and electron spin state, which influences the active sites and critical intermediates in eCO2RR processes. Based on the intrinsic relationship between variable metrics and critical intermediates, the optimized strategies of DACs are summarized containing the participation of synergistic atoms, engineering of the atomic coordination environment, regulation of the diversity of central metal atoms, and modulation of metal-support interaction. Finally, the challenges and future opportunities of atomically dispersed catalysts for eCO2RR processes are discussed.

A Ni-O-Ag photothermal catalyst enables 103-m2 artificial photosynthesis with >17% solar-to-chemical energy conversion efficiency

The scalable artificial photosynthesis composed of photovoltaic electrolysis and photothermal catalysis is limited by inefficient photothermal CO2 hydrogenation under weak sunlight irradiation. Herein, NiO nanosheets supported with Ag single atoms [two-dimensional (2D) Ni1Ag0.02O1] are synthesized for photothermal CO2 hydrogenation to achieve 1065 mmol g-1 hour-1 of CO production rate under 1-sun irradiation. This performance is attributed to the coupling effect of Ag-O-Ni sites to enhance the hydrogenation of CO2 and weaken the CO adsorption, resulting in 1434 mmol g-1 hour-1 of CO yield at 300°C. Furthermore, we integrate the 2D Ni1Ag0.02O1-supported photothermal reverse water-gas shift reaction with commercial photovoltaic electrolytic water splitting to construct a 103-m2 scale artificial photosynthesis system (CO2 + H2O → CO + H2 + O2), which achieves more than 22 m3/day of green syngas with an adjustable H2/CO ratio (0.4-3) and a photochemical energy conversion efficiency of >17%. This research charts a promising course for designing practical, natural sunlight-driven artificial photosynthesis systems.

Seeding Atomic Silver into Internal Lattice Sites of Transition Metal Oxide for Advanced Electrocatalysis

Transition metal oxides (TMOs) are widely studied for loading of various catalysts due to their low cost and high structure flexibility. However, the prevailing close-packed nature of most TMOs crystals has restricted the available loading sites to surface only, while their internal bulk lattice remains unactuated due to the inaccessible narrow space that blocks out most key reactants and/or particulate catalysts. Herein, using tunnel-structured MnO2, this study demonstrates how TMO's internal lattice space can be activated as extra loading sites for atomic Ag in addition to the conventional surface-only loading, via which a dual-form Ag catalyst within MnO2 skeleton is established. In this design, not only faceted Ag nanoparticles are confined onto MnO2 surface by coherent lattice-sharing, Ag atomic strings are also seeded deep into the sub-nanoscale MnO2 tunnel lattice, enriching the catalytically active sites. Tested for electrochemical CO2 reduction reaction (eCO2RR), such dual-form catalyst exhibits a high Faradaic efficiency (94%), yield (67.3 mol g-1 h-1) and durability (≈48 h) for CO production, exceeding commercial Ag nanoparticles and most Ag-based electrocatalysts. Theoretical calculations further reveal the concurrent effect of such dual-form catalyst featuring facet-dependent eCO2RR for Ag nanoparticles and lattice-confined eCO2RR for Ag atomic strings, inspiring the future design of catalyst-substrate configuration.

Electronic Structure Design of Transition Metal-Based Catalysts for Electrochemical Carbon Dioxide Reduction

With the increasingly serious greenhouse effect, the electrochemical carbon dioxide reduction reaction (CO2RR) has garnered widespread attention as it is capable of leveraging renewable energy to convert CO2 into value-added chemicals and fuels. However, the performance of CO2RR can hardly meet expectations because of the diverse intermediates and complicated reaction processes, necessitating the exploitation of highly efficient catalysts. In recent years, with advanced characterization technologies and theoretical simulations, the exploration of catalytic mechanisms has gradually deepened into the electronic structure of catalysts and their interactions with intermediates, which serve as a bridge to facilitate the deeper comprehension of structure-performance relationships. Transition metal-based catalysts (TMCs), extensively applied in electrochemical CO2RR, demonstrate substantial potential for further electronic structure modulation, given their abundance of d electrons. Herein, we discuss the representative feasible strategies to modulate the electronic structure of catalysts, including doping, vacancy, alloying, heterostructure, strain, and phase engineering. These approaches profoundly alter the inherent properties of TMCs and their interaction with intermediates, thereby greatly affecting the reaction rate and pathway of CO2RR. It is believed that the rational electronic structure design and modulation can fundamentally provide viable directions and strategies for the development of advanced catalysts toward efficient electrochemical conversion of CO2 and many other small molecules.

Built-in Electric Field Promotes Interfacial Adsorption and Activation of CO2 for C1 Products over a Wide Potential Window

The unsatisfactory adsorption and activation of CO2 suppress electrochemical reduction over a wide potential window. Herein, the built-in electric field (BIEF) at the CeO2/In2O3 n-n heterostructure realizes the C1 (CO and HCOO-) selectivity over 90.0% in a broad range of potentials from -0.7 to -1.1 V with a maximum value of 98.7 ± 0.3% at -0.8 V. In addition, the C1 current density (-1.1 V) of the CeO2/In2O3 heterostructure with a BIEF is about 2.0- and 3.2-fold that of In2O3 and a physically mixed sample, respectively. The experimental and theoretical calculation results indicate that the introduction of CeO2 triggered the charge redistribution and formed the BIEF at the interfaces, which enhanced the interfacial adsorption and activation of CO2 at low overpotentials. Furthermore, the promoting effect was also extended to CeO2/In2S3. This work gives a deep understanding of BIEF engineering for highly efficient CO2 electroreduction over a wide potential window.

Catalytic Oxidation of Benzene over Atomic Active Site AgNi/BCN Catalysts at Room Temperature

Benzene is the typical volatile organic compound (VOC) of indoor and outdoor air pollution, which harms human health and the environment. Due to the stability of their aromatic structure, the catalytic oxidation of benzene rings in an environment without an external energy input is difficult. In this study, the efficient degradation of benzene at room temperature was achieved by constructing Ag and Ni bimetallic active site catalysts (AgNi/BCN) supported on boron-carbon-nitrogen aerogel. The atomic-scale Ag and Ni are uniformly dispersed on the catalyst surface and form Ag/Ni-C/N bonds with C and N, which were conducive to the catalytic oxidation of benzene at room temperature. Further catalytic reaction mechanisms indicate that benzene reacted with ·OH to produce R·, which reacted with O2 to regenerate ·OH. Under the strong oxidation of ·OH, benzene was oxidized to form alcohols, carboxylic acids, and eventually CO2 and H2O. This study not only significantly reduces the energy consumption of VOC catalytic oxidation, but also improves the safety of VOC treatment, providing new ideas for the low energy consumption and green development of VOC treatment.

Structure-Property Interplay Within Microporous Manganese Dioxide Tunnels For Sustainable Energy Storage

Tunnel-structured manganese dioxides (MnO2 ), also known as octahedral molecule sieves (OMS), are widely studied in geochemistry, deionization, energy storage and (electro)catalysis. These functionalities originate from their characteristic sub-nanoscale tunnel framework, which, with a high degree of structural polymorphism and rich surface chemistry, can reversibly absorb and transport various ions. An intensive understanding of their structure-property relationship is prerequisite for functionality optimization, which has been recently approached by implementation of advanced (in situ) characterizations providing significant atomistic sciences. This review will thus timely cover recent advancements related to OMS and their energy storage applications, with a focus on the atomistic insights pioneered by researchers including our group: the origins of structural polymorphism and heterogeneity, the evolution of faceted OMS crystals and its effect on electrocatalysis, the ion transport/storage properties and their implication for processing OMS. These studies represent a clear rational behind recent endeavors investigating the historically applied OMS materials, the summary of which is expected to deepen the scientific understandings and guide material engineering for functionality control.

Modulating the Structure and Composition of Single-Atom Electrocatalysts for CO2 reduction

Electrochemical CO2 reduction reaction (eCO2 RR) is a promising strategy to achieve carbon cycling by converting CO2 into value-added products under mild reaction conditions. Recently, single-atom catalysts (SACs) have shown enormous potential in eCO2 RR due to their high utilization of metal atoms and flexible coordination structures. In this work, the recent progress in SACs for eCO2 RR is outlined, with detailed discussions on the interaction between active sites and CO2 , especially the adsorption/activation behavior of CO2 and the effects of the electronic structure of SACs on eCO2 RR. Three perspectives form the starting point: 1) Important factors of SACs for eCO2 RR; 2) Typical SACs for eCO2 RR; 3) eCO2 RR toward valuable products. First, how different modification strategies can change the electronic structure of SACs to improve catalytic performance is discussed; Second, SACs with diverse supports and how supports assist active sites to undergo catalytic reaction are introduced; Finally, according to various valuable products from eCO2 RR, the reaction mechanism and measures which can be taken to improve the selectivity of eCO2 RR are discussed. Hopefully, this work can provide a comprehensive understanding of SACs for eCO2 RR and spark innovative design and modification ideas to develop highly efficient SACs for CO2 conversion to various valuable fuels/chemicals.

Stabilizing *CO2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO2 Reduction

CO2 electroreduction (CO2 R) operating in acidic media circumvents the problems of carbonate formation and CO2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO2 R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali-cation-free CO2 R in pure acid. However, without alkali cations, stabilizing *CO2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube-supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single-atom active site with energetically localized d states to strengthen the adsorbate-surface interactions, which stabilizes *CO2 intermediates at the acidic interface (pH=1). As a result, we realize CO2 conversion to CO in pure acid with a faradaic efficiency of 60 % at pH=2 in flow cell. Furthermore, CO2 is successfully converted in cation exchanged membrane-based electrode assembly with a faradaic efficiency of 73 %. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO2 R compared to alkaline conditions, since the potential-limiting step, *CO2 to *COOH, is pH-dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO2 R.

Structural Analysis of Single-Atom Catalysts by X-ray Absorption Spectroscopy

ConspectusMetal nanoparticles (NPs) are one of the most frequently used heterogeneous catalysts. However, only the surface atoms in the NPs can participate in catalytic reactions. To maximize the atomic efficiency, the active sites can be reduced to single atoms. Generally, catalysts that have isolated metal atoms on the surface of a support are called single-atom catalysts (SACs). Many techniques have been developed and applied to probe the structures of SACs. Nevertheless, the structural characterization of SACs is still challenging as it requires the analysis of their structure and properties with atomic and sometimes even subatomic resolution. X-ray absorption spectroscopy (XAS) is a powerful tool in investigating the local coordination environment of SACs since it is element-specific and can provide accurate structural information at the subatomic level (∼0.01 Å).In this Account, we present our perspectives on the structural analysis of SACs from some unique features in the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). We first highlight the importance of the XANES peak features in the sensitive analysis of SAC structures. Such analysis is illustrated to be even more useful in the joint applications of experimental and theoretical XAS. The inspection of the metal-metal (M-M) peak in Fourier transformed EXAFS (FT-EXAFS) spectra is a widely used method to identify the single-atom structure, but this method is not always reliable. Thus, we point out the importance of fitting EXAFS and the thorough interpretation of structural parameters such as coordination numbers (CNs, the number of neighboring atoms next to a chosen atom), bond distances, and the Debye-Waller factor (σ2). The small FT-EXAFS peak for the M-M shell is often ignored in the structural analysis of SACs. Here, it is demonstrated that a careful analysis of these small peaks could help more reliably analyze the SAC structure, and it would be particularly useful in the analysis of a single-atom alloy (SAA). Next, the usefulness of bond distance and σ2 analysis is highlighted, and such analysis is shown to be particularly helpful for the analysis of SAAs, which is rarely discussed in the literature. Given the advantage that XAS data can be collected under various conditions, we show that in situ XAS can provide important information about the catalytic mechanism of the SAC catalyst. In particular, we emphasize the significance of using an advanced in situ technique to extract detailed structural information that is difficult to obtain from regular XAS experiments. Finally, we highlight the importance of jointly using XAS with other complementary methods in a more complete understanding of the structure and properties of SACs. It is anticipated that with further development of XAS techniques and improved data analysis, XAS will become even more powerful in providing insights into the structure-property relationships of SACs, which can advance their practical applications.

Recent Advances in Hierarchical Porous Engineering of MOFs and Their Derived Materials for Catalytic and Battery: Methods and Application

Hierarchical porous materials have attracted the attention of researchers due to their enormous specific surface area, maximized active site utilization efficiency, and unique structure and properties. In this context, metal-organic frameworks (MOFs) offer a unique mix of properties that make them particularly appealing as tunable porous substrates containing highly active sites. This review focuses on recent advances in the types and synthetic strategies of hierarchical porous MOFs and their derived materials. Furthermore, it highlights the relationship between the mass diffusion and transport of hierarchical porous structures and the pore size with examples and simulations, while identifying their potential and limitations. On this basis, how the synthesis conditions affect the structure and electrochemical properties of MOFs based hierarchical porous materials with different structures is discussed, highlighting the prospects and challenges for the synthetization, as well as further scientific research and practical applications. Finally, some insights into current research and future design ideas for advanced MOFs based hierarchical porous materials are presented.

Sulfur defect induced Cd0.3Zn0.7S in-situ anchoring on metal organic framework for enhanced photothermal catalytic CO2 reduction to prepare proportionally adjustable syngas

The rapid recombination of interfacial charges is considered to be the main obstacle limiting the photocatalytic CO2 reduction. Thus, it is a challenge to research an accurate and stable charge transfer control strategy. MIL-53 (Al)-S/Cd0.3Zn0.7S (MAS/CZS-0.3) photocatalysts with chemically bonded interfaces were constructed by in-situ electrostatic assembly of sulfur defect Cd0.3Zn0.7S (CZS-0.3) on the surface of MIL-53 (Al) (MAW), which enhanced interfacial coupling and accelerated electron transfer efficiency. An adjustable proportion of syngas (H2/CO) was prepared by photothermal catalytic CO2 reduction at micro-interface. and the optimal yield of CO (66.10 μmol∙g-1∙h-1) and H2 (71.0 μmol∙g-1∙h-1) was realized by the MAS/CZS-0.3 photocatalyst. The improved activity was due to the photogenerated electrons migrated from CZS-0.3 to the adsorption active sites of MAS, which strengthened the adsorption and activation of CO2 on MAS. The photothermal catalytic CO2 reduction to CO follows the pathway of CO2→*COOH → CO and CO2→*HCO3-→CO. This work provided a reference for the research, characterization, and application of in-situ anchoring of metal organic frameworks in photothermal catalytic CO2 reduction, and provided a green path for the supply of Syngas in industry.

Breaking Scaling Relations for Highly Efficient Electroreduction of CO2 to CO on Atomically Dispersed Heteronuclear Dual-Atom Catalyst

Conversion of CO2 into value-added products by electrocatalysis provides a promising way to mitigate energy and environmental problems. However, it is greatly limited by the scaling relationship between the adsorption strength of intermediates. Herein, Mn and Ni single-atom catalysts, homonuclear dual-atom catalysts (DACs), and heteronuclear DACs are synthesized. Aberration-corrected annular dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray absorption spectroscopy characterization uncovered the existence of the Mn─Ni pair in Mn─Ni DAC. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy reveal that Mn donated electrons to Ni atoms in Mn─Ni DAC. Consequently, Mn─Ni DAC displays the highest CO Faradaic efficiency of 98.7% at -0.7 V versus reversible hydrogen electrode (vs RHE) with CO partial current density of 16.8 mA cm-2 . Density functional theory calculations disclose that the scaling relationship between the binding strength of intermediates is broken, resulting in superior performance for ECR to CO over Mn─Ni─NC catalyst.

Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.

Dual-Active-Sites Single-Atom Catalysts for Advanced Applications

Dual-Active-Sites Single-Atom catalysts (DASs SACs) are not only the improvement of SACs but also the expansion of dual-atom catalysts. The DASs SACs contains dual active sites, one of which is a single atomic active site, and the other active site can be a single atom or other type of active site, endowing DASs SACs with excellent catalytic performance and a wide range of applications. The DASs SACs are categorized into seven types, including the neighboring mono metallic DASs SACs, bonded DASs SACs, non-bonded DASs SACs, bridged DASs SACs, asymmetric DASs SACs, metal and nonmetal combined DASs SACs and space separated DASs SACs. Based on the above classification, the general methods for the preparation of DASs SACs are comprehensively described, especially their structural characteristics are discussed in detail. Meanwhile, the in-depth assessments of DASs SACs for variety applications including electrocatalysis, thermocatalysis and photocatalysis are provided, as well as their unique catalytic mechanism are addressed. Moreover, the prospects and challenges for DASs SACs and related applications are highlighted. The authors believe the great expectations for DASs SACs, and this review will provide novel conceptual and methodological perspectives and exciting opportunities for further development and application of DASs SACs.

Synergetic Role of Thermal Catalysis and Photocatalysis in CO2 Reduction on Cu2/MoS2

Effective activation of CO2 is a primarily challenging issue in CO2 reduction to value-added hydrocarbon chemicals, due to the large energy gap between the highest-occupied and lowest-unoccupied molecular orbitals (HOMO-LUMO). Here, we employ state-of-the-art first-principles calculations to explore the synergetic role of thermal catalysis and photocatalysis in CO2 reduction, on typical single-atom scale catalyst, i.e., Cu2 magic cluster on a semiconducting two-dimensional MoS2 substrate. It is identified that only about 1% of the hot electrons excited from the MoS2 substrate by at least 6.3 eV photons may be trapped by the inert CO2 molecule at the expense of 400 fs. Moreover, the physisorption-to-chemisorption transition of CO2 can be observed within 500 fs upon overcoming an about 0.05 eV energy barrier. Contrastingly, upon chemisorption, the activated CO2δ- species may trap about 7% of the hot electron excited from the MoS2 substrate by about 2.5 eV visible photons, with a cost of 140 fs.

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO2 reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti3 C2 Tx MXene-regulated Ag-ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag-ZnO/Ti3 C2 Tx catalyst achieves an outstanding CO2 conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm-2 at -0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag-ZnO interfaces contributes the high selectivity of CO. The CO2 conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO2 reduction.

Single-Atom Catalysts in Environmental Engineering: Progress, Outlook and Challenges

Recently, single-atom catalysts (SACs) have attracted wide attention in the field of environmental engineering. Compared with their nanoparticle counterparts, SACs possess high atomic efficiency, unique catalytic activity, and selectivity. This review summarizes recent studies on the environmental remediation applications of SACs in (1) gaseous: volatile organic compounds (VOCs) treatment, NO_x reduction, CO₂ reduction, and CO oxidation; (2) aqueous: Fenton-like advanced oxidation processes (AOPs), hydrodehalogenation, and nitrate/nitrite reduction. We present the treatment activities and reaction mechanisms of various SACs and propose challenges and future opportunities. We believe that this review will provide constructive inspiration and direction for future SAC research in environmental engineering.

Transition Metal Single Atoms Constructed by Using Inherent Confined Space

Single-atom catalysts (SACs) show expressively enhanced activity toward diverse reactions due to maximized atomic utilization of metal sites, while their facile, universal, and massive preparation remains a pronounced challenge. Here we report a facile strategy for the preparation of SACs by use of the inherent confined space between the template and silica walls in template-occupied mesoporous silica SBA-15 (TOS). Different transition metal precursors can be introduced into the confined space readily by grinding, and during succeeding calcination single atoms are constructed in the form of M-O-Si (M = Cu, Co, Ni, and Zn). In addition to the generality, the present strategy is easy to scale up and can allow the synthesis of 10 g of SACs in one pot through ball milling. The Cu SAC has been applied for CO₂ cycloaddition of epichlorohydrin, and the activity is obviously higher than the counterpart prepared without confined space and various reported Cu-containing catalysts.

Rational design of atomic site catalysts for electrochemical CO2 reduction

Renewable-energy-powered electrochemical CO₂ reduction (ECR) is a promising way of transforming CO₂ to value-added products and achieving sustainable carbon recycling. By virtue of the extremely high exposure rate of active sites and excellent catalytic performance, atomic site catalysts (ASCs), including single-atomic site catalysts and diatomic site catalysts, have attracted considerable attention. In this feature article, we focus on the rational design strategies of ASCs developed in recent years for the ECR reaction. The influence of these strategies on the activity and selectivity of ASCs for ECR is further discussed in terms of electronic regulation, synergistic activation, microenvironmental regulation and tandem catalytic system construction. Finally, the challenges and future directions are indicated. We hope that this feature article will be helpful in the development of novel ASCs for ECR.

Single-atom catalysts for electrochemical applications

The field of small molecule electro-activated conversion is becoming a new star in modern catalytic research toward the carbon-neutral future. The advent of single-atom catalysts (SACs) is expected to greatly accelerate the kinetics of electrocatalytic reactions such as the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), etc., owing to their maximum atomic efficiency, unique quantized energy level structure and strong interaction between well-defined active sites and supports. In this feature article, our group's proposed synthesis methodology applied in electrocatalysis is mainly summarized. Furthermore, we elaborate on how to achieve the stabilization of single metal atoms against migration and agglomeration during the preparation of SACs. Moreover, the electrochemical applications of SACs with a focus on the above heterogeneous reactions are presented. Finally, the prospects for the development and deficiencies of these SACs for electrocatalytic reactions are discussed.

Atomically Dispersed Cu Catalysts on Sulfide-Derived Defective Ag Nanowires for Electrochemical CO2 Reduction

Single-atom catalysts (SACs) have shown potential for achieving an efficient electrochemical CO₂ reduction reaction (CO2RR) despite challenges in their synthesis. Here, Ag₂S/Ag nanowires provide initial anchoring sites for Cu SACs (Cu/Ag₂S/Ag), then Cu/Ag(S) was synthesized by an electrochemical treatment resulting in complete sulfur removal, i.e., Cu SACs on a defective Ag surface. The CO2RR Faradaic efficiency (FE_CO2RR) of Cu/Ag(S) reaches 93.0% at a CO2RR partial current density (j_CO2RR) of 2.9 mA/cm² under -1.0 V vs RHE, which outperforms sulfur-removed Ag₂S/Ag without Cu SACs (Ag(S), 78.5% FE_CO2RR with 1.8 mA/cm²j_CO2RR). At -1.4 V vs RHE, both FE_CO2RR and j_CO2RR over Cu/Ag(S) reached 78.6% and 6.1 mA/cm², which tripled those over Ag(S), respectively. As revealed by in situ and ex situ characterizations together with theoretical calculations, the interacted Cu SACs and their neighboring defective Ag surface increase microstrain and downshift the d-band center of Cu/Ag(S), thus lowering the energy barrier by ∼0.5 eV for *CO formation, which accounts for the improved CO2RR activity and selectivity toward related products such as CO and C₂₊ products.

Oxygen-Bridged Indium-Nickel Atomic Pair as Dual-Metal Active Sites Enabling Synergistic Electrocatalytic CO2 Reduction

Single-atom catalysts offer a promising pathway for electrochemical CO₂ conversion. However, it is still a challenge to optimize the electrochemical performance of dual-atom catalysts. Here, an atomic indium-nickel dual-sites catalyst bridged by an axial oxygen atom (O-In-N₆ -Ni moiety) was anchored on nitrogenated carbon (InNi DS/NC). InNi DS/NC exhibits superior CO selectivity with Faradaic efficiency higher than 90 % over a wide potential range from -0.5 to -0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, an industrial CO partial current density up to 317.2 mA cm^-2 is achieved at -1.0 V vs. RHE in a flow cell. In situ ATR-SEIRAS combined with theory calculations reveal that the synergistic effect of In-Ni dual-sites and O atom bridge not only reduces the reaction barrier for the formation of *COOH, but also retards the undesired hydrogen evolution reaction. This work provides a feasible strategy to construct dual-site catalysts towards energy conversion.

Novel Microbial Palladium Nanoparticles with a High Photothermal Effect for Antibacterial Applications

Novel biocompatible palladium nanoparticles (Pd-NPs) have been prepared by microorganisms via Bacillus megaterium Y-4. It was demonstrated that ultrasonication treatment of biologically reduced Pd-NPs impart a much higher absorption in NIR regions and a better photothermal conversion efficiency to the material. The as-prepared material showed excellent biocompatibility and antibacterial activity under NIR irradiation. In less than 10 min, the disinfection efficiency for a low dosage of Pd-NPs (20 mg/L) was 99.99% toward both Staphylococcus aureus and Escherichia coli. The exclusive and even dispersed microbial Pd-NPs display a high efficiency of photothermal conversion under the irradiation of NIR, which endows them with excellent antibacterial activity in a low dosage.

Sn Dopants with Synergistic Oxygen Vacancies Boost CO2 Electroreduction on CuO Nanosheets to CO at Low Overpotential

Using the electrochemical CO₂ reduction reaction (CO₂RR) with Cu-based electrocatalysts to achieve carbon-neutral cycles remains a significant challenge because of its low selectivity and poor stability. Modulating the surface electron distribution by defects engineering or doping can effectively improve CO₂RR performance. Herein, we synthesize the electrocatalyst of V_o-CuO(Sn) nanosheets containing oxygen vacancies and Sn dopants for application in CO₂RR-to-CO. Density functional theory calculations confirm that the incorporation of oxygen vacancies and Sn atoms substantially reduces the energy barrier for *COOH and *CO intermediate formation, which results in the high efficiency, low overpotential, and superior stability of the CO₂RR to CO conversion. This electrocatalyst possesses a high Faraday efficiency (FE) of 99.9% for CO at a low overpotential of 420 mV and a partial current density of up to 35.22 mA cm^-2 at -1.03 V versus reversible hydrogen electrode (RHE). The FE_CO of V_o-CuO(Sn) could retain over 95% within a wide potential area from -0.48 to -0.93 V versus RHE. Moreover, we obtain long-term stability for more than 180 h with only a slight decay in its activity. Therefore, this work provides an effective route for designing environmentally friendly electrocatalysts to improve the selectivity and stability of the CO₂RR to CO conversion.

Heteroatoms Induce Localization of the Electric Field and Promote a Wide Potential-Window Selectivity Towards CO in the CO2 Electroreduction

Carbon dioxide electroreduction (CO2 RR) is a sustainable way of producing carbon-neutral fuels. Product selectivity in CO2 RR is regulated by the adsorption energy of reaction-intermediates. Here, we employ differential phase contrast-scanning transmission electron microscopy (DPC-STEM) to demonstrate that Sn heteroatoms on a Ag catalyst generate very strong and atomically localized electric fields. In situ attenuated total reflection infrared spectroscopy (ATR-IR) results verified that the localized electric field enhances the adsorption of *COOH, thus favoring the production of CO during CO2 RR. The Ag/Sn catalyst exhibits an approximately 100 % CO selectivity at a very wide range of potentials (from -0.5 to -1.1 V, versus reversible hydrogen electrode), and with a remarkably high energy efficiency (EE) of 76.1 %.

Single-atom site catalysts for environmental remediation: Recent advances

Single-atom site catalysts (SACs) can maximize the utilization of active metal species and provide an attractive way to regulate the activity and selectivity of catalytic reactions. The adjustable coordination configuration and atomic structure of SACs enable them to be an ideal candidate for revealing reaction mechanisms in various catalytic processes. The minimum use of metals and relatively tight anchoring of the metal atoms significantly reduce leaching and environmental risks. Additionally, the unique physicochemical properties of single atom sites endow SACs with superior activity in various catalytic processes for environmental remediation (ER). Generally, SACs are burgeoning and promising materials in the application of ER. However, a systematic and critical review on the mechanism and broad application of SACs-based ER is lacking. Herein, we review emerging studies applying SACs for different ERs, such as eliminating organic pollutants in water, removing volatile organic compounds, purifying automobile exhaust, and others (hydrodefluorination and disinfection). We have summarized the synthesis, characterization, reaction mechanism and structural-function relationship of SACs in ER. In addition, the perspectives and challenges of SACs for ER are also analyzed. We expect that this review can provide constructive inspiration for discoveries and applications of SACs in environmental catalysis in the future.

General Strategies to Construct Highly Efficient Sensing Interfaces for Metal Ions Detection from the Perspective of Catalysis

Constructing high-effective electrode sensing interfaces has been considered an effective method for electrochemical detection toward heavy metal ions (HMIs). However, most research has been devoted to enhancing the stripping currents of HMIs by simply improving the adsorptive capacity and conductivity of the electrode modified materials, while lacking theoretical guidelines in fabricating catalytic sensing interfaces. Besides, the understanding of detection mechanisms is quite unscientific from the perspective of catalysis. This perspective summarizes five general strategies in designing highly efficient sensing interfaces in the recent five years, including modulating crystal phases, orientations and planes, defect engineering, ionic valence state cycle engineering, adsorption in situ catalysis strategy, and construction of atomic level catalytic active sites. What's more, the catalytic mechanisms for improving the signals of HMIs, such as boosting the electron transfer rates and conversion rates, lowering the energy barriers, etc., are introduced and emphasized. This study has a great significance in directionally controlling functionalized electrochemical sensors to achieve excellent sensitivity and selectivity in detecting environmental pollutants from the view of catalysis, and it also brings enlightenments and guidance to develop new electroanalytical methods.

Vacancy-Rich MXene-Immobilized Ni Single Atoms as a High-Performance Electrocatalyst for the Hydrazine Oxidation Reaction

Single-atom catalysts (SACs), on account of their outstanding catalytic potential, are currently emerging as high-performance materials in the field of heterogeneous catalysis. Constructing a strong interaction between the single atom and its supporting matrix plays a pivotal role. Herein, Ti₃ C₂ T_x -MXene-supported Ni SACs are reported by using a self-reduction strategy via the assistance of rich Ti vacancies on the Ti₃ C₂ T_x MXene surface, which act as the trap and anchor sites for individual Ni atoms. The constructed Ni SACs supported by the Ti₃ C₂ T_x MXene (Ni SACs/Ti₃ C₂ T_x ) show an ultralow onset potential of -0.03 V (vs reversible hydrogen electrode (RHE)) and an exceptional operational stability toward the hydrazine oxidation reaction (HzOR). Density functional theory calculations suggest a strong coupling of the Ni single atoms and their surrounding C atoms, which optimizes the electronic density of states, increasing the adsorption energy and decreasing the reaction activation energy, thus boosting the electrochemical activity. The results presented here will encourage a wider pursuit of 2D-materials-supported SACs designed by a vacancy-trapping strategy.

Recent progress of Ga-based liquid metals in catalysis

Within the last decade, the application of gallium-based liquid metals in catalysis has received great attention from around the world. This article provides an overview concerning Ga-based liquid metals (LMs) in energy and environmental applications, such as the catalytic synthesis of ethylene by non-petroleum routes via Pd-Ga liquid catalysts, alkane dehydrogenation via Pd-Ga or Pt-Ga catalysts, CO2 hydrogenation to methanol via Ni Ga or Pd/Ga2O3 catalysts, and catalytic degradation of CO2 via EGaIn liquid metal catalysts below 500 °C, where Ga-based liquid metal catalysts exhibit high selectivity and low energy consumption. The formation of isolated metal sites in a liquid metal matrix allows the integration of several characteristics of multiphase catalysis (particularly the operational friendliness of product separation procedures) with those of homogeneous catalysis. In the end, this article sheds light on future prospects, opportunities, and challenges of liquid metal catalysis.

Metal-Coordinated Phthalocyanines as Platform Molecules for Understanding Isolated Metal Sites in the Electrochemical Reduction of CO2

Single-atom catalysts (SACs) of non-precious transition metals (TMs) often show unique electrochemical performance, including the electrochemical carbon dioxide reduction reaction (CO₂RR). However, the inhomogeneity in their structures makes it difficult to directly compare SACs of different TM for their CO₂RR activity, selectivity, and reaction mechanisms. In this study, the comparison of isolated TMs (Fe, Co, Ni, Cu, and Zn) is systematically investigated using a series of crystalline molecular catalysts, namely TM-coordinated phthalocyanines (TM-Pcs), to directly compare the intrinsic role of the TMs with identical local coordination environments on the CO₂RR performance. The combined experimental measurements, in situ characterization, and density functional theory calculations of TM-Pc catalysts reveal a TM-dependent CO₂RR activity and selectivity, with the free energy difference of ΔG(*HOCO) - ΔG(*CO) being identified as a descriptor for predicting the CO₂RR performance.

Microenvironment Modulation in Carbon-Supported Single-Atom Catalysts for Efficient Electrocatalytic CO2 Reduction

The electrocatalytic CO 2 reduction reaction (ECRR) becomes an effective way to reduce excess CO 2 in the air and a promising strategy to maintain carbon balance. Carbon-supported single-atom catalysts (C-SACs) is a kind of cost savings and most promising catalysts for ECRR. For C-SACs, the key to achieving efficient ECRR performance is to adjusting the electronic structure of the central metal atoms by modulating their microenvironment of the catalysts. Not only the coordination numbers and hetero-atom coordination, but also the regulation of diatomic sites have a great influence on the performance of C-SACs. This review mainly focuses on recent studies for the microenvironment modulation in C-SACs for efficient ECRR. We hope that this review can contribute readers a comprehensive insight in the current research status of C-SACs for ECRR, as well as provide help for the rational design of C-SACs with better ECRR performance.

Boosting the Electrocatalytic CO2 Reduction Reaction by Nanostructured Metal Materials via Defects Engineering

Electrocatalytic CO₂ reduction reaction (CO₂RR) is one of the most effective methods to convert CO₂ into useful fuels. Introducing defects into metal nanostructures can effectively improve the catalytic activity and selectivity towards CO₂RR. This review provides the recent progress on the use of metal nanomaterials with defects towards electrochemical CO₂RR and defects engineering methods. Accompanying these ideas, we introduce the structure of defects characterized by electron microscopy techniques as the characterization and analysis of defects are relatively difficult. Subsequently, we present the intrinsic mechanism of how the defects affect CO₂RR performance. Finally, to promote a wide and deep study in this field, the perspectives and challenges concerning defects engineering in metal nanomaterials towards CO₂RR are put forward.

Nano-Ag: Environmental applications and perspectives

Silver nanoparticles (AgNPs) are promising bactericidal agents and plasmonic NPs for environmental applications, owing to their various favorable properties. For example, AgNPs enables reactive oxygen species (ROS) generation, surface plasmon resonance (SPR), and specific reaction selectivities. In fact, AgNPs-based materials and their antimicrobial, optical, and electrical effects are at the forefront of nanotechnology, having applications in environmental disinfection, elimination of environmental pollutants, environmental detection, and energy conversions. This review aims to comprehensively summarize the advanced applications and fundamental mechanisms to provide the guidelines for future work in the field of AgNPs implanted functional materials. The state-of-art terms including (photo)(electro)catalytic reactions, heterojunction formation, the generation and attacking of ROS, genetic damage, hot electron generation and transfer, localized surface plasmon resonance (LSPR), plasmon resonance energy transfer (PERT), near field electromagnetic enhancement, structure-function relationship, and reaction selectivities have been covered in this review. It is expected that this review may provide insights into the rational development in the next generation of AgNPs-based nanomaterials with excellent performances.

Direct Visualization of the Evolution of a Single-Atomic Cobalt Catalyst from Melting Nanoparticles with Carbon Dissolution

Transition metal single-atom catalysts (SACs) are of immense interest, but how exactly they are evolved upon pyrolysis of the corresponding precursors remains unclear as transition metal ions in the complex precursor undergo a series of morphological changes accompanied with changes in oxidation state as a result of the interactions with the carbon support. Herein, the authors record the complete evolution process of Co SAC during the pyrolysis a Co/Zn-containing zeolitic imidazolate framework. Aberration-corrected environmental TEM coupled with in-situ EELS is used for direct visualization of the evolution process at 200-1000 °C. Dissolution of carbon into the nanoparticles of Co is found to be key to modulating the wetting behavior of nanoparticles on the carbon support; melting of Co nanoparticles and their motion within the zeolitic architecture leads to the etching of the framework structure, yielding porous C/N support onto which Co-single atoms reside. This uniquely structured Co SAC is found to be effective for the oxidation of a series of aromatic alkanes to produce selective ketones among other possible products. The carbon dissolution and melting/sublimation-driven structural dynamics of transition metal revealed here will expand the methodology in synthesizing SACs and other high-temperature processes.

Synergistic Cr2 O3 @Ag Heterostructure Enhanced Electrocatalytic CO2 Reduction to CO

The electrocatalytic CO₂ RR to produce value-added chemicals and fuels has been recognized as a promising means to reduce the reliance on fossil resources; it is, however, hindered due to the lack of high-performance electrocatalysts. The effectiveness of sculpturing metal/metal oxides (MMO) heterostructures to enhance electrocatalytic performance toward CO₂ RR has been well documented, nonetheless, the precise synergistic mechanism of MMO remains elusive. Herein, an in operando electrochemically synthesized Cr₂ O₃ -Ag heterostructure electrocatalyst (Cr₂ O₃ @Ag) is reported for efficient electrocatalytic reduction of CO₂ to CO. The obtained Cr₂ O₃ @Ag can readily achieve a superb FE_CO of 99.6% at -0.8 V (vs RHE) with a high J_CO of 19.0 mA cm^-2 . These studies also confirm that the operando synthesized Cr₂ O₃ @Ag possesses high operational stability. Notably, operando Raman spectroscopy studies reveal that the markedly enhanced performance is attributable to the synergistic Cr₂ O₃ -Ag heterostructure induced stabilization of CO₂ ^•- /*COOH intermediates. DFT calculations unveil that the metallic-Ag-catalyzed CO₂ reduction to CO requires a 1.45 eV energy input to proceed, which is 0.93 eV higher than that of the MMO-structured Cr₂ O₃ @Ag. The exemplified approaches in this work would be adoptable for design and development of high-performance electrocatalysts for other important reactions.