Highly Soluble Supertetrahedra upon Selective Partial Butylation of Chalcogenido Metalate Clusters in Ionic Liquids

Pseudotetrahedral Organotin-Capped Chalcogenidometalate Supermolecules with Optical Limiting Performance

The rational design of crystalline clusters with adjustable compositions and dimensions is highly sought after but quite challenging as it is important to understand their structural evolution processes and to systematically establish structure-property relationships. Herein, a family of organotin-based sulfidometalate supertetrahedral clusters has been prepared via mixed metal and organotin strategies at low temperatures (60-120 °C). By engineering the metal composition, we can effectively control the size of the clusters, which ranges from 8 to 35, accompanied by variable configurations: P1-[(RSn)4M4S13], T3-[(RSn)4In4M2S16] (R = nbutyl-Bu and phenyl-Ph; M = Cd, Zn, and Mn), T4-[(BuSn)4In13Cu3S31], truncated P2, viz. TP2-[(BuSn)6In10Cu6S31], and even T5-[(BuSn)4In22Zn6Cu3S52], all of which are the largest organometallic supertetrahedral clusters known to date. Of note, the arylstannane approach plays a critical role in regulating the peripheral ligands and further enriching geometric structures of the supertetrahedral clusters. This is demonstrated by the formation of tin-oxysulfide clusters, such as T3-[(RSn)4Sn6O4S16] (R = Bu, Ph, and benzyl = Be) and its variants, truncated T3, viz., TT3-[(BuSn)6Sn3O4S13] and augmented T3, viz., T3-[(Bu3SnS)4Sn6O4S16]. Especially, two extraordinary truncated clusters break the tetrahedral symmetry observed in typical supertetrahedral clusters, further substantiating the advantages offered by the arylstannane approach in expanding cluster chemistry. These organometallic supertetrahedral clusters are highly soluble and stable in common solvents. Additionally, they have tunable third-order nonlinear optical behaviors by controlling the size, heterometallic combination, organic modification, and intercluster interaction.

Selective and benign alkylation of sulfido-oxo stannate clusters with propyl, pentyl, or hexyl substituents

Chalcogenido metalate compounds that are based on tetrahedral clusters have been extensively studied in recent years due to their rich structural chemistry and uncommon chemical and physical properties. Recently it was shown that partial butylation of the inorganic cluster core by ionothermal reactions allowed access to tetrahedral sulfido-oxo stannate clusters with reasonable solubility in conventional solvents at the retainment of their opto-electronic features. We have expanded this mild alkylation approach, and herein report success in receiving the first sulfido-oxo stannate clusters that are selectively propylated, pentylated, and hexylated. This was achieved in a unique way by preparing symmetrically 1,3-substituted imidazolium bromides in preparative scale and using them as both the reaction medium and alkylatoin reagent. We discuss the effect of the organic groups attached to the cluster and present in the counterions of the products on the compounds' structural and opto-electronic properties.

TURBOMOLE: Today and Tomorrow

TURBOMOLE is a highly optimized software suite for large-scale quantum-chemical and materials science simulations of molecules, clusters, extended systems, and periodic solids. TURBOMOLE uses Gaussian basis sets and has been designed with robust and fast quantum-chemical applications in mind, ranging from homogeneous and heterogeneous catalysis to inorganic and organic chemistry and various types of spectroscopy, light-matter interactions, and biochemistry. This Perspective briefly surveys TURBOMOLE's functionality and highlights recent developments that have taken place between 2020 and 2023, comprising new electronic structure methods for molecules and solids, previously unavailable molecular properties, embedding, and molecular dynamics approaches. Select features under development are reviewed to illustrate the continuous growth of the program suite, including nuclear electronic orbital methods, Hartree-Fock-based adiabatic connection models, simplified time-dependent density functional theory, relativistic effects and magnetic properties, and multiscale modeling of optical properties.

Ionothermal Approach to Homo- and Heteroleptic Alkylation of Tellurido Mercurate Clusters for Assembly in Lamellar Crystal Structures

The selective methylation and butylation of chalcogenido metalate clusters by utilizing imidazolium-based ionic liquids turned out to be not only a comparably mild but at the same time also the only known method for postsynthetic alkylation of such species in order to increase their solubility. For additional impact on the crystal structures, selective alkylation with longer alkyl chains was addressed by utilizing the ionic liquid (C10C1Im)[BF4] (C10 = decyl group at position 1 and C1 = methyl group at position 3 of the cation's Im = imidazolium ring) for ionothermal syntheses of functionalized tellurido mercurate clusters. Herein, we report three novel compounds, two of which comprise cluster anions that exhibit a selective organic functionalization of their terminal telluride ligands upon in situ alkylation with the ionic liquid: [Hg6Te6(Te2)2(TeDec)2]6- (in 1; Dec = decyl) represents the first decylated chalcogenido metalate cluster. A unique heteroleptic functionalization, combining methylation and decylation, was achieved for the second cluster, [Hg6Te6(Te2)2(TeDec)(TeMe)]6- (in 2; Me = methyl). The third cluster is purely inorganic, but based on the same cluster core architecture: [Hg4Te2(Te2)2(Te3)2]4- (in 3) comprises a tritelluride unit instead of two HgTeR groups (R = Me, Dec). As a consequence of the long alkyl chains, both at the cluster and at the charge-compensating cations, all three crystal structures are characterized by lamellar assemblies of cations and anions. For further comparison of the properties of the organometallic versus purely inorganic compounds, vibrational and optical properties of crystalline samples of the compounds comprising clusters 1 and 3 were studied by means of infrared, Raman, and UV-visible spectroscopy. The results clearly show the effect of the presence of an organic decoration (in 1) relative to its absence (in 3), reflected by a red shift of the band gap energy (1 → 3) and a replacement of the Te-C bands (in 1) with bands for tritelluride units (in 3).

Thermodynamic Transformation of Crystalline Organic Hybrid Iron Selenide to FexSey@CN Microrods for Sodium Ion Storage

Carbon-coated metal chalcogenide composites have been demonstrated as one type of promising anode material for sodium-ion batteries (SIBs). However, combining carbon materials with micronanoparticles of metal chalcogenide always involve complicated processes, such as polymer coating, carbonization, and sulfidation/selenization. To address this issue, herein, we reported a series of carbon-coated FexSey@CN (FexSey = FeSe2, Fe3Se4, Fe7Se8) composites prepared via the thermodynamic transformation of a crystalline organic hybrid iron selenide [Fe(phen)2](Se4) (phen = 1,10-phenanthroline). By pyrolyzing the bulk crystals of [Fe(phen)2](Se4) at different temperatures, FexSey microrods were formed in situ, where the nitrogen-doped carbon layers were coated on the surface of the microrods. Moreover, all the as-prepared FexSey@CN composites exhibited excellent sodium-ion storage capabilities as anode materials in SIBs. This work proves that crystalline organic hybrid metal chalcogenides can be used as a novel material system for the in situ formation of carbon-coated metal chalcogenide composites, which could have great potential in the application of electrochemical energy storage.

Crystalline chalcogenidometalate-based compounds from uncommon reaction media

Chalcogenides are one of the most versatile inorganic materials families, further subdivided into a large variety of specific groups of compounds, ranging from neat binary or multinary solids and nanoparticles of the same formal compositions, both in crystalline or non-crystalline form, to complicated open-framework structures and cluster compounds, also including organ(ometall)ic derivates of the latter. The large variety regarding both the compositions and the structures is associated with an enormous variety of properties, ranging from simple or high-tech pigments through a multitude of opto-electronic devices and electrolytes to materials for ion separation or high-sophisticated catalysts. Naturally, this also goes hand in hand with a corrosponding breadth of synthesis strategies. Traditionally, chalcogenides have been accessed via high-temperature methods, which continuously have been replaced by lower-temperature approaches for economical and ecological reasons. Moreover, more recent methods also showed that new types of chalcogenide materials can be obtained under such milder conditions that are not accessible via traditional routes. To shed light onto one of the numerous families of chalcogenides, this feature article summarizes current achievements in the generation of multinary chalcogenidometallate-based clusters and networks via non-classical routes, using ionic liquids, surfactants, or hydrazine as reaction media at moderately elevated termperature.

Exploration of metal sulfide syntheses and the dissolution process of antimony sulfide in phosphonium-based ionic liquids

Ionic liquids (ILs), especially task-specific ILs, are capable of dissolving various solids at moderate temperatures without the need for special reaction vessels. Direct synthesis of binary sulfides of B, Bi, Ge, Mo, Cu, Au, Sn, In, Ti, V, Fe, Co, Ga, Ni, Al, Zn, and Sb in [P₆₆₆₁₄]Cl was tested at 100 °C, i.e. below the melting point of sulfur. Under these conditions, substantial sulfide formation occurred only for nickel (Ni₃S₄, Ni₃S₂, NiS) and copper (Cu₂S, CuS). Sb showed no formation of crystalline sulfide, but after addition of EtOH, an orange material precipitated which was identified as amorphous metastibnite. Subsequently, the dissolution of antimony sulfide (Sb₂S₃), the main source of antimony production, in the phosphonium-based ILs [P₆₆₆₁₄][OAc] and [P₆₆₆₁₄]Cl at 100 °C was studied in detail. The dissolution proceeds without H₂S evolution, and amorphous Sb₂S₃ can be precipitated from these solutions. Heating Sb₂S₃ in the Lewis-acidic IL [BMIm]Cl·4.7AlCl₃ led to the crystallization of [Sb₁₃S₁₆Cl₂][AlCl₄]₅, which contains a new quadruple heterocubane cation.

Modification of metallic and non-metallic sites in pentasupertetrahedral chalcogenidometalate clusters for third-order nonlinear optical response

Four isomorphic P2 chalcogenide clusters named [Sn₁₁In₉Cu₆S₄₄]·11(H⁺DBU) (1) (DBU = 1,8-diazabicyclo[5.4.0] undec-7-ene), [Sn₁₀In₁₀Cu₆Se₄₄]·6(H₂²⁺DMAPA)·2(DMAPA)·9EG (2) (DMAPA = 3-dimethylaminopropylamine, EG = ethylene glycol), [Sn₁₀In₁₀Cu₆S₄₀O₄]·6[H₂²⁺PMDETA]·10EG (3) (PMDETA = pentamethyldiethylenetriamine), [Sn₁₀Ga₁₀Cu₆S₄₀O₄]·6(H₂²⁺DMAPA)·7EG (4) have been isolated via organotin precursor and mixed-metal strategy. These clusters exhibit excellent solubility in organic solvents. The continuous-regulation of optical band and optical limiting performance have been realized through precise controlled substituting engineering of cationic and anionic elements.

Ionothermal Access to Defined Oligomers of Supertetrahedral Selenido Germanate Clusters

Supertetrahedral chalcogenido (semi)metalate clusters have been in the focus of inorganic and materials chemistry for many years owing to a variety of outstanding physical and chemical properties. However, a critical drawback in the canon of studying corresponding compounds has been the lack of control in assembling the supertetrahedral units, which have been known as either highly charged monomeric cluster anions or lower charged, yet extended anionic substructures of linked clusters. The latter is the reason for the predominance of applications of such materials in heterogeneous environment, or their solubilization by organic shielding, which in turn was unfavorable regarding the optical properties. Recently, we reported a partial alkylation of such clusters, which allowed for a significantly enhanced solubility at a marginal impact on the optical gap. Herein we showcase the formation of finite cluster oligomers of supertetrahedral architectures by ionothermal syntheses. We were successful in generating the unprecedented dimers and tetramers of the [Ge₄Se₁₀]^4- anion in salts with imidazolium-based ionic liquid counterions. The oligomers exhibit lower average negative charges and thus reduced electrostatic interactions between anionic clusters and cationic counterions. As a consequence, the salts readily dissolve in common solvents like DMF. Besides, the tetrameric [Ge₁₆Se₃₆]^8- anion represents the largest discrete chalcogenide cluster of a group 14 element. We prove that undestroyed cluster oligomers can be transferred into solution by means of electrospray ionization (ESI) mass spectrometry and provide a full set of characteristics of the compounds including crystal structures and optical properties.

NMR Coupling Constants Based on the Bethe-Salpeter Equation in the GW Approximation

We present the first steps to extend the Green's function GW method and the Bethe-Salpeter equation (BSE) to molecular response properties such as nuclear magnetic resonance (NMR) indirect spin-spin coupling constants. We discuss both a nonrelativistic one-component and a quasi-relativistic two-component formalism. The latter describes scalar-relativistic and spin-orbit effects and allows us to study heavy-element systems with reasonable accuracy. Efficiency is maintained by the application of the resolution of the identity approximation throughout. The performance is demonstrated using conventional central processing units (CPUs) and modern graphics processing units (GPUs) for molecules involving several thousand basis functions. Our results show that a large amount of Hartree-Fock exchange is vital to provide a sufficient Kohn-Sham starting point to compute the GW quasi-particle energies. As the GW-BSE approach is generally less accurate for triplet excitations or related properties such as the Fermi-contact interaction, the admixture of the Kohn-Sham correlation kernel through the contracted BSE (cBSE) method improves the results for NMR coupling constants. This leads to remarkable results when combined with the eigenvalue-only self-consistent variant (evGW) and Becke's half and half functional (BH&HLYP) or the CAM-QTP family. The developed methodology is used to calculate the Karplus curve of tin molecules, illustrating its applicability to extended chemically relevant molecules. Here, the GW-cBSE method improves upon the chosen BH&HLYP Kohn-Sham starting points.

A Discrete Ligand-Free T3 Supertetrahedral Cluster of Gallium Sulfide

Large discrete supertetrahedral clusters of metal chalcogenides are rare due to the difficulty of crystallizing solids in which the negative charge of the cluster is balanced by the positive charges of the countercations. Here, we describe a discrete ligand-free T3 supertetrahedral cluster, [Ga10S16(SH)4]6-, which was successfully synthesized in the presence of the superbase 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) using the neutral surfactant polyethyleneglycol (PEG)-400 as the reaction solvent. Protonated DBUH+ cations are incorporated into the crystal structure of the product, which can be formulated as [C9H17N2]6[Ga10S16(SH)4]. This compound, which represents the first example of a discrete ligand-free T3 cluster of gallium sulfide, was fully characterized by single-crystal and powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermogravimetric analysis, and ultraviolet-visible diffuse reflectance. The results presented here indicate that the use of surfactants as solvents offers potential for the preparation of new compounds containing supertetrahedral clusters.

Highly Soluble Supertetrahedra upon Selective Partial Butylation of Chalcogenido Metalate Clusters in Ionic Liquids

Supertetrahedral clusters have been reported in two generally different types so far: one type possessing an organic ligand shell, no or low charges, and high solubility, while the other cluster type is ligand-free with usually high charges and low or no solubility in common solvents. The latter is a tremendous disadvantage regarding further use of the clusters in solution. However, as organic substituents usually broaden the HOMO-LUMO gaps, which cannot be overcompensated by the (limited) cluster sizes, a full organic shielding comes along with drawbacks regarding opto-electronic properties. We therefore sought to find a way of generating soluble clusters with a minimum number of organic substituents. Here, we present the synthesis and full characterization of two salts of [Sn10 O4 S16 (SBu)4 ]4- that are high soluble in CH2 Cl2 or CH3 CN, which includes first NMR and mass spectra obtained from solutions of such salts with mostly inorganic supertetrahedral clusters. The optical absorption properties of this new class of compounds indicates nearly unaffected band gaps. The synthetic approach and the spectroscopic findings were rationalized and explained by means of high-level quantum chemical studies.