High Proton-Conductivity in Covalently Linked Polyoxometalate-Organoboronic Acid-Polymers

An Organodiphosphate-Containing Polyoxoniobate Ring and Its Assembly into a Three-Dimensional Framework through Hydrogen Bonding

In this work, a novel organodiphosphate-containing inorganic-organic hybrid polyoxoniobate (PONb) ring {(PO3CH2CH2PO3H)4Nb8O16}4- (Nb8P8) has been achieved by a one-pot hydrothermal method. The ring is constructed from a tetragonal {Nb8O36} motif and four {PO3CH2CH2PO3H} ligands. Interestingly, Nb8P8 can be joined together via K-H2O clusters {K2(H2O)4(OH)2} to form one-dimensional chains {[K2(H2O)4(OH)2]Nb8P8}n and further linked by {Cu(en)2}2+ (en = ethylenediamine) complexes, resulting in a three-dimensional supramolecular framework {[Cu(en)2]2[K2(H2O)4(OH)2]Nb8P8}·3en·H2O (1). 1 exhibits good chemical and thermal stability and has a high water vapor adsorption capacity of ≤224 cm3 g-1 (22.71 mol·mol-1) at 298 K, outperforming most of the known polyoxometalate-based materials. Impedance measurements prove that 1 can transfer protons with moderate conductivity. This study not only contributes to the structural diversity of organodiphosphate-containing PONbs and PONb rings but also provides a reference for the development of PONb-based materials with unique performance.

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Three-Dimensional Polyoxometalate Organic Frameworks with One-Dimensional Channels Constructed by Multiple Helical Chains Based on 22-Core Ln/Mn/Mo Clusters for Proton Conduction

Two unique 22-core sandwich {[Mn6Mo6O37]Ln3[MnMo6O24]} (Ln = La or Pr) units have been assembled, featuring an undisclosed {Mn6Mo6} cluster. This assembly is subsequently integrated into two three-dimensional polyoxometalate organic frameworks, which exhibit one-dimensional hydrophilic hexagonal channels formed by six intertwined 63 helical chains, leading to effective proton conduction primarily facilitated by an abundance of water molecules within the channels.

Hydrogenation Catalysis by Hydrogen Spillover on Platinum-Functionalized Heterogeneous Boronic Acid-Polyoxometalates

The activation of molecular hydrogen is a key process in catalysis. Here, we demonstrate how polyoxometalate (POM)-based heterogeneous compounds functionalized with Platinum particles activate H2 by synergism between a hydrogen spillover mechanism and electron-proton transfer by the POM. This interplay facilitates the selective catalytic reduction of olefins and nitroarenes with high functional group tolerance. A family of polyoxotungstates covalently functionalized with boronic acids is reported. In the solid-state, the compounds are held together by non-covalent interactions (π-π stacking and hydrogen bonding). The resulting heterogeneous nanoscale particles form stable colloidal dispersions in acetonitrile and can be surface-functionalized with platinum nanoparticles by in situ photoreduction. The resulting materials show excellent catalytic activity in hydrogenation of olefins and nitrobenzene derivatives under mild conditions (1 bar H2 and room temperature).

A Pair of Multifunctional Cu(II)-Dy(III) Enantiomers with Zero-Field Single-Molecule Magnet Behaviors, Proton Conduction Properties and Magneto-Optical Faraday Effects

Multifunctional materials with a coexistence of proton conduction properties, single-molecule magnet (SMM) behaviors and magneto-optical Faraday effects have rarely been reported. Herein, a new pair of Cu(II)-Dy(III) enantiomers, [DyCu2(RR/SS-H2L)2(H2O)4(NO3)2]·(NO3)·(H2O) (R-1 and S-1) (H4L = [RR/SS] -N,N'-bis [3-hydroxysalicylidene] -1,2-cyclohexanediamine), has been designed and prepared using homochiral Schiff-base ligands. R-1 and S-1 contain linear Cu(II)-Dy(III)-Cu(II) trinuclear units and possess 1D stacking channels within their supramolecular networks. R-1 and S-1 display chiral optical activity and strong magneto-optical Faraday effects. Moreover, R-1 shows a zero-field SMM behavior. In addition, R-1 demonstrates humidity- and temperature-dependent proton conductivity with optimal values of 1.34 × 10-4 S·cm-1 under 50 °C and 98% relative humidity (RH), which is related to a 1D extended H-bonded chain constructed by water molecules, nitrate and phenol groups of the RR-H2L ligand.

Semi-Solid Supramolecular Ionic Network Electrolytes Formed by Zwitterionic Liquids and Polyoxometalate Nanoclusters for High Proton Conduction

Flexible electrolytes with solid self-supporting properties are highly desired in the fields of energy and electronics. However, traditional flexible electrolytes prepared by doping ionic liquids or salt solutions into a polymer matrix pose a risk of liquid component leakage during device operation. In this work, the development of supramolecular ionic network electrolytes using polyoxometalate nanoclusters as supramolecular crosslinkers to solidify bola-type zwitterionic liquids is reported. The resulting self-supporting electrolytes possess semi-solid features and show a high proton conductivity of 8.2 × 10-4 S cm-1 at low humidity (RH = 30%). Additionally, the electrolytes exhibit a typical plateau region in rheological tests, indicating that their dynamic network structures can contribute mechanical behavior similar to the entangled networks in covalent polymer materials. This work introduces a new paradigm for designing flexible solid electrolytes and expands the concept of reticular chemistry to noncrystalline systems.

Ce-mediated molecular tailoring on gigantic polyoxometalate {Mo132} into half-closed {Ce11Mo96} for high proton conduction

Precise synthesis of polyoxometalates (POMs) is important for the fundamental understanding of the relationship between the structure and function of each building motif. However, it is a great challenge to realize the atomic-level tailoring of specific sites in POMs without altering the major framework. Herein, we report the case of Ce-mediated molecular tailoring on gigantic {Mo132}, which has a closed structural motif involving a never seen {Mo110} decamer. Such capped wheel {Mo132} undergoes a quasi-isomerism with known {Mo132} ball displaying different optical behaviors. Experiencing an 'Inner-On-Outer' binding process with the substituent of {Mo2} reactive sites in {Mo132}, the site-specific Ce ions drive the dissociation of {Mo2*} clipping sites and finally give rise to a predictable half-closed product {Ce11Mo96}. By virtue of the tailor-made open cavity, the {Ce11Mo96} achieves high proton conduction, nearly two orders of magnitude than that of {Mo132}. This work offers a significant step toward the controllable assembly of POM clusters through a Ce-mediated molecular tailoring process for desirable properties.

Space-Confined Nucleation of Semimetal-Oxo Clusters within a [H7P8W48O184]33- Macrocycle: Synthesis, Structure, and Enhanced Proton Conductivity

Spatially confined assembly of semimetallic oxyanions (AsO₃^3- and SbO₃^3-) within a [H₇P₈W₄₈O₁₈₄]^33- (P₈W₄₈) macrocycle has afforded three nanoscale polyanions, [{As^III₅O₄(OH)₃}₂(P₈W₄₈O₁₈₄)]^32- (As₁₀), [(Sb^IIIOH)₄(P₈W₄₈O₁₈₄)]^32- (Sb₄), and [(Sb^IIIOH)₈(P₈W₄₈O₁₈₄)]^24- (Sb₈), which were crystallized as the hydrated mixed-cation salts (Me₂NH₂)₁₃K₇Na₂Li₁₀[{As^III₅O₄(OH)₃}₂(P₈W₄₈O₁₈₄)]·32H₂O (DMA-KNaLi-As₁₀), K₂₀Li₁₂[(Sb^IIIOH)₄(P₈W₄₈O₁₈₄)]·52H₂O (KLi-Sb₄), and (Me₂NH₂)₈K₆Na₅Li₅[(Sb^IIIOH)₈(P₈W₄₈O₁₈₄)]·65H₂O (DMA-KNaLi-Sb₈), respectively. A multitude of solid- and solution-state physicochemical techniques were employed to systematically characterize the structure and composition of the as-made compounds. The polyanion of As₁₀ represents the first example of a semimetal-oxo cluster-substituted P₈W₄₈ and accommodates the largest As^III-oxo cluster in polyoxometalates (POMs) reported to date. The number of incorporated SbO₃^3- groups in Sb₄ and Sb₈ could be customized by a simple variation of Sb^III-containing precursors. Encapsulation of semimetallic oxyanions inside P₈W₄₈ sets out a valid strategy not only for the development of host-guest assemblies in POM chemistry but also for their function expansion in emerging applications such as proton-conducting materials, for which DMA-KNaLi-As₁₀ showcases an outstanding conductivity of 1.2 × 10^-2 S cm^-1 at 85 °C and 70% RH.

Keeping Superprotonic Conductivity over a Wide Temperature Region via Sulfate Hopping Sites-Decorated Zirconium-Oxo Clusters

Metal-oxo clusters have emerged as advanced proton conductors with well-defined and tunable structures. Nevertheless, the exploitation of metal-oxo clusters with high and stable proton conductivity over a relatively wide temperature range still remains a great challenge. Herein, three sulfate groups decorated zirconium-oxo clusters (Zr₆ , Zr₁₈ , and Zr₇₀ ) as proton conductors are reported, which exhibit ultrahigh bulk proton conductivities of 1.71 × 10^-1 , 2.01 × 10^-2 , and 3.73 × 10^-2  S cm^-1 under 70 °C and 98% relative humidity (RH), respectively. Remarkably, Zr₆ and Zr₇₀ with multiple sulfate groups as proton hopping sites show ultralow activation energies of 0.22 and 0.18 eV, respectively, and stable bulk conductivities of >10^-2  S cm^-1 between 30 and 70 °C at 98% RH. Moreover, a time-dependent proton conductivity test reveals that the best performing Zr₆ can maintain high proton conductivity up to 15 h with negligible loss at 70 °C and 98% RH, representing one of the best crystalline cluster-based proton conducting materials.

Supramolecular Anchoring of Polyoxometalate Amphiphiles into Nafion Nanophases for Enhanced Proton Conduction

Advanced proton exchange membranes (PEMs) are highly desirable in emerging sustainable energy technology. However, the further improvement of commercial perfluorosulfonic acid PEMs represented by Nafion is hindered by the lack of precise modification strategy due to their chemical inertness and low compatibility. Here, we report the robust assembly of polyethylene glycol grafted polyoxometalate amphiphile (GSiW₁₁) into the ionic nanophases of Nafion, which largely enhances the comprehensive performance of Nafion. GSiW₁₁ can coassemble with Nafion through multiple supramolecular interactions and realize a stable immobilization. The incorporation of GSiW₁₁ can increase the whole proton content in the system and induce the hydrated ionic nanophase to form a wide channel for proton transport; meanwhile, GSiW₁₁ can reinforce the Nafion ionic nanophase by noncovalent cross-linking. Based on these synergistic effects, the hybrid PEMs show multiple enhancements in proton conductivity, tensile strength, and fuel cell power density, which are all superior to the pristine Nafion. This work demonstrates the intriguing advantage of molecular nanoclusters as supramolecular enhancers to develop high-performance electrolyte materials.

Assemblies of Increasingly Large Ln-Containing Polyoxoniobates and Intermolecular Aggregation-Disaggregation Interconversions

An oxalate-assisted lanthanide (Ln) incorporation strategy is first demonstrated for creating rare high-nuclearity Ln-containing polyoxoniobates (PONbs). With the strategy, a series of high-nuclearity Ln-containing PONbs of 50-nuclearity Dy₂Nb₄₈, 103-nuclearity Dy₇Nb₉₆, 200-nuclearity Dy₁₀Nb₁₉₀, and 206-nuclearity Dy₁₄Nb₁₉₂ have been made, showing an increasingly large structure evolution from Dy₂Nb₄₈ monomer to Dy₇Nb₉₆ dimer and to distinct Dy₁₀Nb₁₉₀ and Dy₁₄Nb₁₉₂ tetramers. Among them, Dy₁₄Nb₁₉₂ presents the largest heterometallic PONb and also the PONb with the greatest number of Ln ions reported thus far. Interestingly, both giant Dy₁₄Nb₁₉₂ and Dy₁₀Nb₁₉₀ molecules can further undergo single-crystal to single-crystal intermolecular aggregations, forming infinite {Dy₁₄Nb₁₉₂}_∞ and {Dy₁₀Nb₁₉₀}_∞ chains, respectively. The former structural transformation shows a reversible humidity-dependent aggregation-disaggregation process accompanied by a proton conductivity response, while the latter structural transformation is irreversible. These new species largely enrich the very limited members of Ln-containing PONb family and offer rare examples for studying structural transformations between giant molecular aggregates and infinitely extended structures at the atomic level.

Organophosphonic Acid-Regulating Assembly of PV-SbIII Polyoxotungstate and Its Potential in Building a Dual-Signal Readout Electrochemical Aptasensor for Carcinogen Detection

Template-directed assembly of giant cluster-based nanomaterials is an everlasting theme in cluster science. In this work, ethylenediamine tetramethylphosphonic acid [H₈EDTPA = (POCH₂(OH)₂)₄C₂H₄N₂] and [B-α-SbW₉O₃₃]^9- were, respectively, used as an organic template and an inorganic template to prepare an organophosphonic acid-regulating P^V-Sb^III-heteroatom-inserted polyoxotungstate aggregate [H₂N(CH₃)₂]₅Na₁₁H₉[CeW₄O₁₀(HEDTPA)SbW₁₅O₅₀][B-α-SbW₉O₃₃]₂·36H₂O (1). Noteworthily, organophosphonic acid ligand not only works as an organic template leading to the assembly of a [HEDTPASbW₁₅O₅₀]^14- building block but also further bridges the sandwich-type [CeW₄O₁₀(B-α-SbW₉O₃₃)₂]^11- entity. To extend its potential application in electrochemical sensing properties, we prepared a three-dimensional 1@EGO composite (EGO = reduced graphene oxide functionalized by ethylenediamine) with porous architecture and a prominent conducting ability. Furthermore, the 1@EGO composite was explored as a modification material for glassy carbon electrodes to build a dual-signal readout electrochemical aptasensor for carcinogens, which shows much better detection performance for aflatoxin B1 compared with traditional single-signal biosensors.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -SO3H-Functionalized Polyphosphazene

A polyphosphazene with in-built -SO₃H moieties (PP-PhSO₃H) was facilely synthesized by the polymeric combination of hexachlorocyclotriphosphazene (HCCP) and sulfonate p-phenylenediamine. Characterization reveals that it is a highly stable amorphous polymer. Proton conductivity investigations showed that the synthesized PP-PhSO₃H exhibits a proton conductivity of up to 6.64 × 10^-2 S cm^-1 at 353 K and 98% relative humidity (RH). This value is almost 2 orders of magnitude higher than the corresponding value for its -SO₃H-free analogue, PP-Ph, which is 1.72 × 10^-4 S cm^-1 when measured under the same condition. Consequently, matrix-mixed membranes (labeled PP-PhSO₃H-PAN) were further prepared by mixing PP-PhSO₃H with polyacrylonitrile (PAN) in different ratios to test its potential application in the proton-exchange membrane (PEM) fuel cell. The analysis results indicate that when the weight ratio of PP-PhSO₃H/PAN is 3:1 [named PP-PhSO₃H-PAN (3:1)], its proton conductivity can reach up to 5.05 × 10^-2 S cm^-1 at 353 K and 98% RH, which is even comparable with those of proton-conductive electrolytes currently used in PEM fuel cells. Furthermore, the continuous test demonstrates that the PP-PhSO₃H-PAN (3:1) has long-life reusability. This research reveals that by using phosphazene and sulfonated multiple-amine modules as precursors, organic polymers with excellent proton conductivity for the assembly of matrix-mixed membranes in PEM fuel cells can be easily synthesized by a simple polymeric process.

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide

Developing a facile strategy to construct low-cost and efficient proton-conductive electrolytes is pivotal in the practical application of proton exchange membrane (PEM) fuel cells. Herein, a polyamide with in-built -SO₃H moieties, PA(PhSO3H)2, was synthesized via a simple one-pot polymeric acylation process. Investigations via electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA(PhSO3H)2 displays a proton conductivity of up to 5.54 × 10^-2 S cm^-1 at 353 K under 98% relative humidity (RH), which is more than 2 orders of magnitude higher than that of its -SO₃H-free analogue PA(Ph)2 (2.38 × 10^-4 S cm^-1) under the same conditions. Therefore, after mixing with polyacrylonitrile (PAN) at different ratios, PA(PhSO3H)2-based matrix-mixed membranes were subsequently made and the analysis results revealed that the proton conductivity can reach up to 5.82 × 10^-2 S cm^-1 at 353 K and 98% RH when the weight ratio of PA(PhSO3H)2 : PAN is in 3 : 1 (labeled as PA(PhSO3H)2-PAN(3 : 1)), the value of which is comparable even to those of commercially available electrolytes that are used in PEM fuel cells. In addition, continuous testing shows that PA(PhSO3H)2-PAN(3 : 1) possesses long-life reusability. This work demonstrates that, utilizing the simple reaction of polymeric acylation with a sulfonated module as a precursor, highly effective proton-conductive membranes for PEM fuel cells can be achieved in a facile manner.

Superprotonic conduction of intrinsically zwitterionic microporous polymers based on easy-to-make squaraine, croconaine and rhodizaine dyes

Porous organic polymers (POPs) have been prepared via a novel metal free polycondensation between a tritopic indole-based monomer and squaric, croconic and rhodizonic acids. Each of the three POPs exhibited high BET surface areas (331-667 m² g^-1) and zwitterionic structures. Impedance measurements revealed that the intrinsic POPs were relatively weak proton conductors, with a positive correlation between the density of oxo-groups and the proton conduction. Doping the materials with LiCl vastly improved the proton conductivity up to a value of 0.54 S cm^-1 at 90 °C and 90% relative humidity.

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming “hydrogen economy” society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO₃H moieties (PA-PhSO₃H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO₃H displays a proton conductivity of up to 8.85 × 10⁻² S·cm⁻¹ at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO₃H-free analogue, PA-Ph (6.30 × 10⁻⁴ S·cm⁻¹), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10⁻² S·cm⁻¹ at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO₃H:PAN is 3:1 (labeled as PA-PhSO₃H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO₃H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.

Ultrastable Polyoxometalate-Encapsulated Supramolecular Metal-Organic Nanotubes for Single-Crystal Proton Conduction

Two unique polyoxometalate (POM)-encapsulated tubular materials with the formula K(H₂O)₆[M₆(btp)₆(H₂O)₂₂](P₂W₁₈O₆₂)₃(Hbtp)₅(btp)₃·52H₂O [M = Mn (1) and Co (2); btp = 2,6-bis(1,2,4-triazol-1-yl)pyridine] were designed and synthesized based on the Dawson POM and V-type btp ligand, as confirmed by IR, X-ray diffraction (XRD), and element analysis. Single-crystal XRD analyses of compound 1 show that two kinds of remarkable metal-organic supramolecular nanotubes, including trigonal and hexagonal nanotubes, are constructed along the c-axis direction via π···π-packing interactions between {Mn₃(btp)₃} rings and the btp ligands, of which [α-P₂W₁₈O₆₂]^6- anions are confined in channels, making the entire structure extraordinarily stable. Meanwhile, the coordinated [α-P₂W₁₈O₆₂]^6- anion within the hexagonal channel makes the channel highly hydrophilic and attracts a number of guest water molecules to fill in the free space, conducive to proton transport. Therefore, the single-crystal sample of 1 exhibits a high proton conductivity of 6.39 × 10^-3 S cm^-1 along one-dimensional channels, 30 times higher than that of a pellet sample at 358 K and 98% relative humidity.

The largest Se-4f cluster incorporated polyoxometalate with high Lewis acid-base catalytic activity

A 4p-4f cluster incorporated polyoxometalate (POM), namely, H₁₈{[(H₄pic)₄Eu₁₀Se₁₃O₂₈(H₂O)₁₂](α-GeW₉O₃₄)₄·40H₂O (1-Eu, H₄pic = isonicotinic acid), has been first synthesized and characterized. 1-Eu features an interesting four-shell structure, representing the largest Se-4f cluster incorporated POM known to date. Besides, 1-Eu exhibits excellent Lewis acid-base catalytic activity and reusablity in catalyzing the gram-scale dehydration condensation reaction of hydrazines and 1,3-diketones to synthesize polysubstituted pyrazoles.

A Polyniobotungstate-Based Hybrid for Visible-Light-Induced Phosphorylation of N-Aryl-Tetrahydroisoquinoline

A new organic-inorganic hybrid based on a Nb/W mixed-addendum polyoxometalate with the formula H₁₄[(Co(H₂O)₃)₂(C₁₀H₈N₂)₄(P₄W₃₀Nb₆O₁₂₃)]·4(C₁₀H₈N₂)·8H₂O (Co-POM) has been synthesized by the solvothermal method and characterized by single-crystal X-ray diffraction (XRD), powder X-ray diffraction (PXRD), elemental analysis, FTIR spectroscopy, UV-vis absorption spectrum, and thermogravimetric analysis (TGA). Importantly, visible-light-absorption peaks around 525 nm for Co-POM indicated that this material should have potential in visible-light-induced organic reactions. Herein, we disclosed visible-light-promoted phosphorylation of N-aryl-tetrahydroisoquinoline using Co-POM as an efficient heterogeneous photocatalyst. In this procedure, diverse phosphorus reagents are compatible at room temperature and in an O₂ atmosphere, giving the corresponding products in good to excellent yields (up to 97%). Simultaneously, this heterogeneous photocatalyst can be recycled up to ten times with a negligible decrease in yield, showing outstanding sustainability and recyclability.

Macrocyclic Polyoxometalates: Selective Polyanion Binding and Ultrahigh Proton Conduction

The rational development of an anion templation strategy for the construction of macrocycles has been historically limited to small anions, but large polyoxoanions can offer unmatched structural diversity and ample binding sites. Here we report the formation of a {Mo₂₂ Fe₈ } macrocycle by using the Preyssler anion, [NaP₅ W₃₀ O₁₁₀ ]^14- ({P₅ W₃₀ }), as a supramolecular template. The {Mo₂₂ Fe₈ } macrocycle displays selective anion binding behavior in solution. In the solid state, the 1 : 2 host-guest complex, {P₅ W₃₀ }₂ ⊂{Mo₂₂ Fe₈ }, transports protons more effectively, through an extended hydrogen-bonding network, than a related 1 : 1 complex where the guest is completely encapsulated. The results highlight the great potential this anion templation approach has in producing macrocyclic systems for selective anion recognition and proton conduction purposes.

Organic–inorganic hybrid phosphite-participating S-shaped penta-CeIII incorporated tellurotungstate as electrochemical enzymatic hydrogen peroxide for β-D-glucose detection

Polyoxometalate chemistry has made rapid advances in innovative structural chemistry. The lower valence state and lone electron pair effect of subgroup-valence heteroatom Te(IV) can be introduced into the tungsten-oxygen system...

A Lanthanide-tellurium heterometal encapsulated sandwich-type heteropolyoxoniobate with a 3D pcu-type hydrogen-bonding network

A rare sandwich-type heteropolyoxoniobate cluster [Eu(H2O)3Te6Nb18O64(OH)4]15- {EuTe6Nb18}, has been isolated by simultaneously incorporating lanthanide cation and tellurite anions into the polyoxoniobate. {EuTe6Nb18} cluster represents the first examples of lanthanide-incorporated telluroniobate...

Hybrid Liquid-Crystalline Electrolytes with High-Temperature-Stable Channels for Anhydrous Proton Conduction

Modern electrochemical and electronic devices require advanced electrolytes. Liquid crystals have emerged as promising electrolyte candidates due to their good fluidity and long-range order. However, the mesophase of liquid crystals is variable upon heating, which limits their applications as high-temperature electrolytes, e.g., implementing anhydrous proton conduction above 100 °C. Here, we report a highly stable thermotropic liquid-crystalline electrolyte based on the electrostatic self-assembly of polyoxometalate (POM) clusters and zwitterionic polymer ligands. These electrolytes can form a well-ordered mesophase with sub-10 nm POM-based columnar domains, attributed to the dynamic rearrangement of polymer ligands on POM surfaces. Notably, POMs can serve as both electrostatic cross-linkers and high proton conductors, which enable the columnar domains to be high-temperature-stable channels for anhydrous proton conduction. These nanochannels can maintain constant columnar structures in a wide temperature range from 90 to 160 °C. This work demonstrates the unique role of POMs in developing high-performance liquid-crystalline electrolytes, which can provide a new route to design advanced ion transport systems for energy and electronic applications.

Hourglass-Type Polyoxometalate-Based Crystalline Material as an Efficient Proton-Conducting Solid Electrolyte

Proton exchange membrane fuel cells are limited because they are limited to working temperatures and are susceptible to damage by dramatic electrochemical environments such as hydrogen peroxide/radicals. It is necessary to develop new proton-conducting materials that are water-stable and can operate at high temperatures. The hourglass reduced molybdophosphate-based compound (H₂bimb)₃[Zn₃(H₆P₄Mo₆O₃₁)₂] (bimb = 1,4-bis[(1H-imidazol-1-yl)methyl]benzene) was designed and synthesized under solvothermal conditions. Single-crystal X-ray diffraction analyses demonstrated noticeably that CUST-571 was composed of an hourglass {Zn[P₄Mo₆]₂} structure, which consisted of two fully reduced half-units {P₄Mo₆}. It was found that CUST-571 possessed an excellent proton conductivity of 4.54 × 10^-3 S cm^-1 at 85 °C and 98% RH (relative humidity). In addition, CUST-571 is capable of an excellent catalytic decomposition of H₂O₂, which is beneficial to increase the life of fuel cells. On the basis of the aforementioned results, CUST-571 may be a promising proton-conducting polyoxometalate hybrid material in the future.