Controllable Cu 0 ‐Cu + Sites for Electrocatalytic Reduction of Carbon Dioxide

Synthesis of n-Propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains

n-propanol is an important pharmaceutical and pesticide intermediate. To produce n-propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n-propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra-small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n-propanol current density is as high as 101.6 mA cm-2 at the applied potential of -1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1 %. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO-*CO coupling and *CO-*OCCO coupling for the final generation of n-propanol.

Critical Role of Cu Nanoparticle-Loaded Cu(100) Surface Structures on Structured Copper-Based Catalysts in Boosting Ethanol Generation in CO2 Electroreduction

Presently, realizing high ethanol selectivity in CO2 electroreduction remains challenging due to difficult C-C coupling and fierce product competition. In this work, we report an innovative approach for improving the efficiency of Cu-based electrocatalysts in ethanol generation from electrocatalytic CO2 reduction using a crystal plane modification strategy. These novel Cu-based electrocatalysts were fabricated by electrochemically activating three-dimensional (3D) flower-like CuO micro/nanostructures grown in situ on copper foils and modifying with surfactants. It was demonstrated that the fabricated Cu-based electrocatalyst featured a predominantly exposed Cu(100) surface loaded with high-density Cu nanoparticles (NPs). The optimal Cu-based electrocatalyst displayed considerably improved CO2 electroreduction performance, with a Faraday efficiency of 37.9% for ethanol and a maximum Faraday efficiency of 68.0% for C2+ products at -1.4 V vs RHE in an H-cell, accompanied by a high current density of 69.9 mA·cm-2, much better than the particulate Cu-based electrocatalyst. It was unveiled that the Cu(100)-rich surface of nanoscale petals with abundant under-coordinated copper atoms from CuNPs was conducive to the formation and stabilization of key *CH3CHO and *OC2H5 intermediates, thereby promoting ethanol generation. This study highlighted the critical role of CuNP-loaded Cu(100) surface structures on structured Cu-based electrocatalysts in enhancing ethanol production for the CO2 electroreduction process.

Bottom-up Growth of Convex Sphere with Adjustable Cu(0)/Cu(I) Interfaces for Effective C2 Production from CO2 Electroreduction

One challenge confronting the Cu2O catalysts in the electrocatalysis of carbon dioxide reduction reaction (CO2RR) is the reduction of active Cu(I) species, resulting in low selectivity and quick deactivation. In this study, we for the first time introduce a bottom-up growth of convex sphere with adjustable Cu(0)/Cu(I) interfaces (Cux@Cu2O convex spheres). Interestingly, the interfaces are dynamically modulated by varying hydrothermal time, thus regulating the conversion of C1 and C2 products. In particular, the 4 h hydrothermal treatment applied to Cu0.25@Cu2O convex sphere with the favorable Cu(0)/Cu(I) interface results in the highest selectivity for C2 products (90.5 %). In situ Fourier-transform infrared spectroscopy measurements and density functional theory calculations reveal that the Cu(0)/Cu(I) interface lowers the energy barrier for the production of ethylene and ethanol while increasing the coverage of localized *CO adsorbate for increased dimerization. This work establishes a novel approach for transforming the state of valence-sensitive electrocatalysts into high-value energy-related engineering products.

In situ/Operando Synchrotron Radiation Analytical Techniques for CO2/CO Reduction Reaction: From Atomic Scales to Mesoscales

Electrocatalytic carbon dioxide/carbon monoxide reduction reaction (CO(2)RR) has emerged as a prospective and appealing strategy to realize carbon neutrality for manufacturing sustainable chemical products. Developing highly active electrocatalysts and stable devices has been demonstrated as effective approach to enhance the conversion efficiency of CO(2)RR. In order to rationally design electrocatalysts and devices, a comprehensive understanding of the intrinsic structure evolution within catalysts and micro-environment change around electrode interface, particularly under operation conditions, is indispensable. Synchrotron radiation has been recognized as a versatile characterization platform, garnering widespread attention owing to its high brightness, elevated flux, excellent directivity, strong polarization and exceptional stability. This review systematically introduces the applications of synchrotron radiation technologies classified by radiation sources with varying wavelengths in CO(2)RR. By virtue of in situ/operando synchrotron radiationanalytical techniques, we also summarize relevant dynamic evolution processes from electronic structure, atomic configuration, molecular adsorption, crystal lattice and devices, spanning scales from the angstrom to the micrometer. The merits and limitations of diverse synchrotron characterization techniques are summarized, and their applicable scenarios in CO(2)RR are further presented. On the basis of the state-of-the-art fourth-generation synchrotron facilities, a perspective for further deeper understanding of the CO(2)RR process using synchrotron radiation analytical techniques is proposed.

Pt─O Bond Accelerated Cu0/Cu+ Activity for Boosting Low-Energy Bipolar Hydrogen Production

To address the imperative challenge of producing hydrogen in a low-energy consumption electrocatalytic system, this study emphasizes the utilization of thermodynamically favorable biomass oxidation for achieving energy-efficient hydrogen generation. This research integrates ultralow PtO2-loaded flower-like nanosheets (denoted as PtO2@Cu2O/Cu FNs) with Cu0/Cu+ pairs and Pt─O bonds, thereby yielding substantial enhancement in both hydrogen evolution reaction (HER, -0.042 VRHE at 10 mA cm-2) and furfural oxidation reaction (FFOR, 0.09 VRHE at 10 mA cm-2). As validated by DFT calculations, the dual built-in electric field (BIEF) is elucidated as the driving force behind the enhanced activities, in which Pt─O bonds expedite the HER, while Cu+/Cu0 promotes low-potential FFOR. By coupling the FFOR and HER together, the resulting bipolar-hydrogen production system requires a low power input (0.5072 kWh per m3) for producing H2. The system can generate bipolar hydrogen and high value-added furoic acid, significantly enhancing hydrogen production efficiency and concurrently mitigating energy consumption.

Regulating Cu Oxidation State for Electrocatalytic CO2 Conversion into CO with Near-Unity Selectivity via Oxygen Spillover

Cu-based catalysts are the most intensively studied in the field of electrocatalytic CO2 reduction reaction (CO2RR), demonstrating the capacity to yield diverse C1 and C2+ products albeit with unsatisfactory selectivity. Manipulation of the oxidation state of Cu sites during CO2RR process proves advantageous in modulating the selectivity of productions, but poses a formidable challenge. Here, an oxygen spillover strategy is proposed to enhance the oxidation state of Cu during CO2RR by incorporating the oxygen donor Sb2O4. The Cu-Sb bimetallic oxide catalyst attains a remarkable CO2-to-CO selectivity approaching unity, in stark contrast to the diverse product distribution observed with bare CuO. The exceptional Faradaic efficiency of CO can be maintained across a wide range of potential windows of ≈700 mV in 1 m KOH, and remains independent of the Cu/Sb ratio (ranging from 0.1:1 to 10:1). Correlative calculations and experimental results reveal that oxygen spillover from Sb2O4 to Cu sites maintains the relatively high valence state of Cu during CO2RR, which diminishes the binding strength of *CO, thereby achieving heightened selectivity in CO production. These findings propose the role of oxygen spillover in CO2RR over Cu-based catalysts, and shed light on the rational design of highly selective CO2 reduction catalysts.

Strategies to Modulate the Copper Oxidation State Toward Selective C2+ Production in the Electrochemical CO2 Reduction Reaction

The electrochemical reduction of CO2 to form value-added chemicals receives considerable attention in recent years. Copper (Cu) is recognized as the only element capable of electro-reducing CO2 into hydrocarbons with two or more carbon atoms (C2+), but the low product selectivity of the Cu-based catalyst remains a major technological challenge to overcome. Therefore, identification of the structural features of Cu-based catalysts is of great importance for the highly selective production of C2+ products (ethylene, ethanol, n-propanol, etc.), and the oxidation state of Cu species in the catalysts is found critical to the catalyst performance. This review introduces recent efforts to fine-tune the oxidation state of Cu to increase carbon capture and produce specific C2+ compounds, with the intention of greatly expediting the advance in the catalyst designs. It also points to the remaining challenges and fruitful research directions for the development of Cu-based catalysts that can shape the practical CO2 reduction technology.

Efficient CO2 Electroreduction to Multicarbon Products at CuSiO3/CuO Derived Interfaces in Ordered Pores

Electrochemical CO2 conversion to value-added multicarbon (C2+) chemicals holds promise for reducing CO2 emissions and advancing carbon neutrality. However, achieving both high conversion rate and selectivity remains challenging due to the limited active sites on catalysts for carbon-carbon (C─C) coupling. Herein, porous CuO is coated with amorphous CuSiO3 (p-CuSiO3/CuO) to maximize the active interface sites, enabling efficient CO2 reduction to C2+ products. Significantly, the p-CuSiO3/CuO catalyst exhibits impressive C2+ Faradaic efficiency (FE) of 77.8% in an H-cell at -1.2 V versus reversible hydrogen electrode in 0.1 M KHCO3 and remarkable C2H4 and C2+ FEs of 82% and 91.7% in a flow cell at a current density of 400 mA cm-2 in 1 M KOH. In situ characterizations and theoretical calculations reveal that the active interfaces facilitate CO2 activation and lower the formation energy of the key intermediate *OCCOH, thus promoting CO2 conversion to C2+. This work provides a rational design for steering the active sites toward C2+ products.

The Role of Phase Mixing Degree in Promoting C-C Coupling in Electrochemical CO2 Reduction Reaction on Cu-based Catalysts

Cu-based catalysts have been identified as the most promising candidates for generation of C2+ products in electrochemical CO2 reduction reaction. Defect engineering in catalysts is a widely employed strategy for promoting C-C coupling on Cu. However, comprehensive understanding of defect structure-to-activity relationship has not been obtained. In this study, controllable defects generation is achieved, which leads to a series of Cu-based catalysts with various phase mixing degrees. It is observed that the Faradaic efficiency toward C2+ products increases with the phase mixing degree, reaching 81 % at maximum. In situ infrared absorption spectroscopy reveals that the catalysts with higher phase mixing degree tend to form *CO more easily and possess higher retention of *CO under high overpotential window, thereby promoting C-C coupling. This work sheds new light on the relationship between defects and C-C coupling, and the rational developed of more advanced Cu-base catalysts.

Promoting CO2 Electroreduction to Ethane by Iodide-Derived Copper with the Hydrophobic Surface

Electrochemical reduction of CO2 to value-added products provides a feasible pathway for mitigating net carbon emissions and storing renewable energy. However, the low dimerization efficiency of the absorbed CO intermediate (*CO) and the competitive hydrogen evolution reaction hinder the selective electroreduction of CO2 to ethane (C2H6) with a high energy density. Here, we designed hydrophobic iodide-derived copper electrodes (I-Cu/Nafion) for reducing CO2 to C2H6. The Faradaic efficiency of C2H6 reached 23.37% at -0.7 V vs RHE over the I-Cu/Nafion electrode in an H-type cell, which was about 1.7 times higher than that of the I-Cu electrode. The hydrophobic properties of the I-Cu/Nafion electrodes led to an increase in the local CO2 concentration and stabilized the Cu+ species. In situ Raman characterizations and density functional theory calculations indicate that the enhanced performances could be ascribed to the strong *CO adsorption and decreased the formation energy of *COOH and *COCOH intermediates. This study highlights the effect of the hydrophobic surface on Cu-based catalysts in the electroreduction of CO2 and provides a promising way to adjust the selectivity of C2 products.

Customizing catalyst surface/interface structures for electrochemical CO2 reduction

Electrochemical CO2 reduction reaction (CO2RR) provides a promising route to converting CO2 into value-added chemicals and to neutralizing the greenhouse gas emission. For the industrial application of CO2RR, high-performance electrocatalysts featuring high activities and selectivities are essential. It has been demonstrated that customizing the catalyst surface/interface structures allows for high-precision control over the microenvironment for catalysis as well as the adsorption/desorption behaviors of key reaction intermediates in CO2RR, thereby elevating the activity, selectivity and stability of the electrocatalysts. In this paper, we review the progress in customizing the surface/interface structures for CO2RR electrocatalysts (including atomic-site catalysts, metal catalysts, and metal/oxide catalysts). From the perspectives of coordination engineering, atomic interface design, surface modification, and hetero-interface construction, we delineate the resulting specific alterations in surface/interface structures, and their effect on the CO2RR process. At the end of this review, we present a brief discussion and outlook on the current challenges and future directions for achieving high-efficiency CO2RR via surface/interface engineering.

Structure-Function Relationship of Highly Reactive CuOx Clusters on Co3 O4 for Selective Formaldehyde Sensing at Low Temperatures

Designing reactive surface clusters at the nanoscale on metal-oxide supports enables selective molecular interactions in low-temperature catalysis and chemical sensing. Yet, finding effective material combinations and identifying the reactive site remains challenging and an obstacle for rational catalyst/sensor design. Here, the low-temperature oxidation of formaldehyde with CuOx clusters on Co3 O4 nanoparticles is demonstrated yielding an excellent sensor for this critical air pollutant. When fabricated by flame-aerosol technology, such CuOx clusters are finely dispersed, while some Cu ions are incorporated into the Co3 O4 lattice enhancing thermal stability. Importantly, infrared spectroscopy of adsorbed CO, near edge X-ray absorption fine structure spectroscopy and temperature-programmed reduction in H2 identified Cu+ and Cu2+ species in these clusters as active sites. Remarkably, the Cu+ surface concentration correlated with the apparent activation energy of formaldehyde oxidation (Spearman's coefficient ρ = 0.89) and sensor response (0.96), rendering it a performance descriptor. At optimal composition, such sensors detected even the lowest formaldehyde levels of 3 parts-per-billion (ppb) at 75°C, superior to state-of-the-art sensors. Also, selectivity to other aldehydes, ketones, alcohols, and inorganic compounds, robustness to humidity and stable performance over 4 weeks are achieved, rendering such sensors promising as gas detectors in health monitoring, air and food quality control.

Organic Thin Films Enable Retaining the Oxidation State of Copper Catalysts during CO2 Electroreduction

A key challenge in electrocatalysis remains controlling a catalyst's structural, chemical, and electrical properties under reaction conditions. While organic coatings showed promise for enhancing the selectivity and stability of catalysts for CO2 electroreduction (CO2RR), their impact on the chemical state of underlying metal electrodes has remained unclear. In this study, we show that organic thin films on polycrystalline copper (Cu) enable retaining Cu+ species at reducing potentials down to -1.0 V vs RHE, as evidenced by operando Raman and quasi in situ X-ray photoelectron spectroscopy. In situ electrochemical atomic force microscopy revealed the integrity of the porous organic film and nearly unaltered Cu electrode morphology. While the pristine thin film enhances the CO2-to-ethylene conversion, the addition of organic modifiers into electrolytes gives rise to improved CO2RR performance stability. Our findings showcase hybrid metal-organic systems as a versatile approach to control, beyond morphology and local environment, the oxidation states of catalysts and energy conversion materials.

Catalysts and electrolyzers for the electrochemical CO2 reduction reaction: from laboratory to industrial applications

To cope with the urgent environmental pressure and tight energy demand, using electrocatalytic methods to drive the reduction of carbon dioxide molecules and produce a variety of fuels and chemicals, is one of the effective pathways to achieve carbon neutrality. In recent years, many significant advances in the study of the electrochemical carbon dioxide reduction reaction (CO2RR) have been made, but most of the works exhibit low current density, small electrode area and poor long-term stability, which are not suitable for large-scale industrial applications. Herein, combining the research achievements obtained in laboratories and the practical demand of industrial production, we summarize recent frontier progress in the field of the electrochemical CO2RR, including the fundamentals of catalytic reactions, catalyst design and preparation, and the construction of electrolyzers. In addition, we discuss the bottleneck problem of industrial CO2 electrolysis, and further present the prospect of the essential issues to be solved by the available technology for industrial electrolysis. This review can provide some basic understanding and knowledge accumulation for the development and practical application of electrochemical CO2RR technology.

Cu-Based Materials for Enhanced C2+ Product Selectivity in Photo-/Electro-Catalytic CO2 Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO2, Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C2+ compounds through C-C coupling process. Herein, the basic principles of photocatalytic CO2 reduction reactions (PCO2RR) and electrocatalytic CO2 reduction reaction (ECO2RR) and the pathways for the generation C2+ products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO2RR and ECO2RR is emphasized. Through a review of recent studies on PCO2RR and ECO2RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C2+ products. Finally, the opportunities and challenges associated with Cu-based materials in the CO2 catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO2 reduction processes in the future.

CO2 electrocatalytic reduction to ethylene and its application outlook in food science

The efficient conversion of CO2 is considered to be an important step toward carbon emissions peak and carbon neutrality. Presently, great efforts have been devoted to the study of efficient nanocatalysts, electrolytic cell, and electrolytes to achieve high reactivity and selectivity in the electrochemical reduction of CO2 to mono- and multi-carbon (C2+) compounds. However, there are very few reviews focusing on highly reactive and selective ethylene production and application in the field of electrochemical carbon dioxide reduction reaction (CO2RR). Ethylene is a class of multi-carbon compounds that are widely applied in industrial, ecological, and agricultural fields. This review focuses especially on the convertibility of CO2 reduction to generate ethylene technology in practical applications and provides a detailed summary of the latest technologies for the efficient production of ethylene by CO2RR and suggests the potential application of CO2RR systems in food science to further expand the application market of CO2RR for ethylene production.

Designing Cu0-Cu+ dual sites for improved C-H bond fracture towards methanol steam reforming

Copper-based catalysts serve as the predominant methanol steam reforming material although several fundamental issues remain ambiguous such as the identity of active center and the aspects of reaction mechanism. Herein, we prepare Cu/Cu(Al)Ox catalysts with amorphous alumina-stabilized Cu2O adjoining Cu nanoparticle to provide Cu0-Cu+ sites. The optimized catalyst exhibits 99.5% CH3OH conversion with a corresponding H2 production rate of 110.8 μmol s-1 gcat-1 with stability over 300 h at 240 °C. A binary function correlation between the CH3OH reaction rate and surface concentrations of Cu0 and Cu+ is established based on kinetic studies. Intrinsic active sites in the catalyst are investigated with in situ spectroscopy characterization and theoretical calculations. Namely, we find that important oxygen-containing intermediates (CH3O* and HCOO*) adsorb at Cu0-Cu+ sites with a moderate adsorption strength, which promotes electron transfer from the catalyst to surface species and significantly reduces the reaction barrier of the C-H bond cleavage in CH3O* and HCOO* intermediates.

Direct OC-CHO coupling towards highly C2+ products selective electroreduction over stable Cu0/Cu2+ interface

Electroreduction of CO2 to valuable multicarbon (C2+) products is a highly attractive way to utilize and divert emitted CO2. However, a major fraction of C2+ selectivity is confined to less than 90% by the difficulty of coupling C-C bonds efficiently. Herein, we identify the stable Cu0/Cu2+ interfaces derived from copper phosphate-based (CuPO) electrocatalysts, which can facilitate C2+ production with a low-energy pathway of OC-CHO coupling verified by in situ spectra studies and theoretical calculations. The CuPO precatalyst shows a high Faradaic efficiency (FE) of 69.7% towards C2H4 in an H-cell, and exhibits a significant FEC2+ of 90.9% under industrially relevant current density (j = -350 mA cm-2) in a flow cell configuration. The stable Cu0/Cu2+ interface breaks new ground for the structural design of electrocatalysts and the construction of synergistic active sites to improve the activity and selectivity of valuable C2+ products.

Ambient Pressure X-ray Photoelectron Spectroscopy Study of Oxidation Phase Transitions on Cu(111) and Cu(110)

The surface structure effect on the oxidation of Cu has been investigated by performing ambient-pressure X-ray photoelectron spectroscopy (APXPS) on Cu(111) and Cu(110) surfaces under oxygen pressures ranging from 10-8 to 1 mbar and temperatures from 300 to 750 K. The APXPS results show a subsequential phase transition from chemisorbed O/Cu overlayer to Cu2 O and then to CuO on both surfaces. For a given temperature, the oxygen pressure needed to induce initial formation of Cu2 O on Cu(110) is about two orders of magnitude greater than that on Cu(111), which is in contrast with the facile formation of O/Cu overlayer on clean Cu(110). The depth profile measurements during the initial stage of Cu2 O formation indicate the distinct growth modes of Cu2 O on the two surface orientations. We attribute these prominent effects of surface structure to the disparities in the kinetic processes, such as the dissociation and surface/bulk diffusion over O/Cu overlayers. Our findings provide new insights into the kinetics-controlled process of Cu oxidation by oxygen.

Gaining Deep Understanding of Electrochemical CO2 RR with In Situ/Operando Techniques

Electrocatalysis for CO2 conversion has been extensively studied to mitigate the energy shortage and environmental issues, which are gaining ever-increasing attention. However, the complicated CO2 reduction process and the dynamic evolution occurring on electrocatalyst surface make it hard to understand the catalytic mechanism. The development of advanced in situ/operando techniques intelligently coupled with electrochemical cells sheds light on the related study via capturing surface atomic rearrangement, tracing chemical state change of catalysts, monitoring the behavior of intermediates and products, and depicting microenvironment near the electrode surface. In this review, fundamentals of the state-of-the-art in situ/operando techniques are clarified first. Case studies on the in situ/operando techniques performed to probe the CO2 reduction reaction processes are then discussed in detail. Finally, conclusions and outlook on this field are presented.

Switching between C2+ Products and CH4 in CO2 Electrolysis by Tuning the Composition and Structure of Rare-Earth/Copper Catalysts

Rational regulation of the reaction pathway to produce the desired products is one of the most significant challenges in the electrochemical CO2 reduction reaction (CO2RR). Herein, we designed a series of rare-earth Cu catalysts with mixed phases. It was found that the products could be switched from C2+ to CH4 by tuning the composition and structure of the catalysts. Particularly at the Cu/Sm atomic ratio of 9/1 (Cu9Sm1-Ox), the Faradaic efficiency (FE) for C2+ products (FEC2+) could reach 81% at 700 mA cm-2 with negligible CH4. However, the FE of CH4 (FECH4) was 65% at 500 mA cm-2 over Cu1Sm9-Ox (Cu/Sm = 1/9), and the FEC2+ was extremely low. Experiments and theoretical studies indicated that the stable CuSm2O4 phase existed in all the catalysts within the Cu/Sm range of 9/1 to 1/9. At a high Cu content, the catalyst was composed of CuSm2O4 and Cu phases. The small amount of Sm could enhance the binding strength of *CO and facilitate C-C coupling. Conversely, at a high Sm content, the catalyst was composed of CuSm2O4 and Sm2O3 phases. Sm could effectively stabilize bivalent Cu and enrich proton donors, lowering the reaction energy of *CO for deep hydrogenation to generate CH4. In both pathways, the stable CuSm2O4 phase could cooperate with the Cu or Sm2O3 phases, which induced the formation of different microenvironments to generate different products. This strategy also had commonality with other Cu-rare-earth (La, Pr, and Eu) catalysts to boost the CO2RR for C2+ or CH4 production.

Sr2+-Doped CuO Nanoribbons with the Hydrophobic Surface Enabling CO2 Electroreduction to Ethane

Electrochemical reduction of carbon dioxide to value-added multicarbon (C2+) products is a promising way to obtain renewable fuels of high energy densities and chemicals and close the carbon cycle. However, the difficulty of C-C coupling and complexity of the proton-coupled electron transfer process greatly hinder CO2 electroreduction into specific C2+ products with high selectivity. Here, we design an electrocatalyst of Sr-doped CuO nanoribbons with a hydrophobic surface for CO2 electroreduction to ethane with high selectivity. Sr doping enhances the chemical adsorption and activation of CO2 by inducing oxygen vacancies and increasing *CO coverage by stabilizing Cu2+ active sites, thus further boosting subsequent C-C coupling. The hydrophobic surface with dodecyl sulfate anions (DS-) adsorption increases the oxophilicity of the catalyst surface, enhancing the conversion of the *OCH2CH3 intermediate to ethane. As a result, the optimized Sr1.97%-CuO exhibits a Faradaic efficiency of 53.4% and a partial current density of 13.5 mA cm-2 for ethane under a potential of -0.8 V. This study provides a strategy to design a Cu-based catalyst by alkaline earth metal ions doping with the hydrophobic surface to engineer the evolution of the intermediates for a desired product during CO2RR.

Insight on Atomically Dispersed Cu Catalysts for Electrochemical CO2 Reduction

Electrochemical CO2 reduction (ECO2R) with renewable electricity is an advanced carbon conversion technology. At present, copper is the only metal to selectively convert CO2 into multicarbon (C2+) products. Among them, atomically dispersed (AD) Cu catalysts have received great attention due to the relatively single chemical environment, which are able to minimize the negative impact of morphology, valence state, and crystallographic properties, etc. on product selectivity. Furthermore, the completely exposed atomic Cu sites not only provide space and bonding electrons for the adsorption of reactants in favor of better catalytic activity but also provide an ideal platform for studying its reaction mechanism. This review summarizes the recent progress of AD Cu catalysts as a chemically tunable platform for ECO2R, including the atomic Cu sites dynamic evolution, the catalytic performance, and mechanism. Furthermore, the prospects and challenges of AD Cu catalysts for ECO2R are carefully discussed. We sincerely hope that this review can contribute to the rational design of AD Cu catalysts with enhanced performance for ECO2R.

Tuning C1 /C2 Selectivity of CO2 Electrochemical Reduction over in-Situ Evolved CuO/SnO2 Heterostructure

Heterostructured oxides with versatile active sites, as a class of efficient catalysts for CO2 electrochemical reduction (CO2 ER), are prone to undergo structure reconstruction under working conditions, thus bringing challenges to understanding the reaction mechanism and rationally designing catalysts. Herein, we for the first time elucidate the structural reconstruction of CuO/SnO2 under electrochemical potentials and reveal the intrinsic relationship between CO2 ER product selectivity and the in situ evolved heterostructures. At -0.85 VRHE , the CuO/SnO2 evolves to Cu2 O/SnO2 with high selectivity to HCOOH (Faradaic efficiency of 54.81 %). Mostly interestingly, it is reconstructed to Cu/SnO2-x at -1.05 VRHE with significantly improved Faradaic efficiency to ethanol of 39.8 %. In situ Raman spectra and density functional theory (DFT) calculations reveal that the synergetic absorption of *COOH and *CHOCO intermediates at the interface of Cu/SnO2-x favors the formation of *CO and decreases the energy barrier of C-C coupling, leading to high selectivity to ethanol.

Operando Mössbauer Spectroscopic Tracking the Metastable State of Atomically Dispersed Tin in Copper Oxide for Selective CO2 Electroreduction

Metastable state is the most active catalyst state that dictates the overall catalytic performance and rules of catalytic behaviors; however, identification and stabilization of the metastable state of catalyst are still highly challenging due to the continuous evolution of catalytic sites during the reaction process. In this work, operando 119Sn Mössbauer measurements and theoretical simulations were performed to track and identify the metastable state of single-atom Sn in copper oxide (Sn1-CuO) for highly selective CO2 electroreduction to CO. A maximum CO Faradaic efficiency of around 98% at -0.8 V (vs. RHE) over Sn1-CuO was achieved at an optimized Sn loading of 5.25 wt. %. Operando Mössbauer spectroscopy clearly identified the dynamic evolution of atomically dispersed Sn4+ sites in the CuO matrix that enabled the in situ transformation of Sn4+-O4-Cu2+ to a metastable state Sn4+-O3-Cu+ under CO2RR conditions. In combination with quasi in situ X-ray photoelectron spectroscopy, operando Raman and attenuated total reflectance surface enhanced infrared absorption spectroscopies, the promoted desorption of *CO over the Sn4+-O3 stabilized adjacent Cu+ site was evidenced. In addition, density functional theory calculations further verified that the in situ construction of Sn4+-O3-Cu+ as the true catalytic site altered the reaction path via modifying the adsorption configuration of the *COOH intermediate, which effectively reduced the reaction free energy required for the hydrogenation of CO2 and the desorption of the *CO, thereby greatly facilitating the CO2-to-CO conversion. This work provides a fundamental insight into the role of single Sn atoms on in situ tuning the electronic structure of Cu-based catalysts, which may pave the way for the development of efficient catalysts for high-selectivity CO2 electroreduction.

Influence of Cations on HCOOH and CO Formation during CO2 Reduction on a PdMLPt(111) Electrode

Understanding the role of cations in the electrochemical CO2 reduction (CO2RR) process is of fundamental importance for practical application. In this work, we investigate how cations influence HCOOH and CO formation on PdMLPt(111) in pH 3 electrolytes. While only (a small amount of adsorbed) CO forms on PdMLPt(111) in the absence of metal cations, the onset potential of HCOOH and CO decreases with increasing cation concentrations. The cation effect is stronger on HCOOH formation than that on CO formation on PdMLPt(111). Density functional theory simulations indicate that cations facilitate both hydride formation and CO2 activation by polarizing the electronic density at the surface and stabilizing *CO2-. Although the upshift of the metal work function caused by high coverage of adsorbates limits hydride formation, the cation-induced electric field counterbalances this effect in the case of *H species, sustaining HCOOH production at mild negative potentials. Instead, at the high *CO coverages observed at very negative potentials, surface hydrides do not form, preventing the HCOOH route both in the absence and presence of cations. Our results open the way for a consistent evaluation of cationic electrolyte effects on both activity and selectivity in CO2RR on Pd-Pt catalysts.

Dual-Site Metal Catalysts for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO2 reduction reaction (CO2 RR) is a promising and green approach for reducing atmospheric CO2 concentration and achieving high-valued conversion of CO2 under the carbon-neutral policy. In CO2 RR, the dual-site metal catalysts (DSMCs) have received wide attention for their ingenious design strategies, abundant active sites, and excellent catalytic performance attributed to the synergistic effect between dual-site in terms of activity, selectivity and stability, which plays a key role in catalytic reactions. This review provides a systematic summary and detailed classification of DSMCs for CO2 RR, describes the mechanism of synergistic effects in catalytic reactions, and also introduces in situ characterization techniques commonly used in CO2 RR. Finally, the main challenges and prospects of dual-site metal catalysts and even multi-site catalysts for CO2 recycling are analyzed. It is believed that based on the understanding of bimetallic site catalysts and synergistic effects in CO2 RR, well-designed high-performance, low-cost electrocatalysts are promising for achieving CO2 conversion, electrochemical energy conversion and storage in the future.

Guiding catalytic CO2 reduction to ethanol with copper grain boundaries

The grain boundaries (GBs) in copper (Cu) electrocatalysts have been suggested as active sites for CO₂ electroreduction to ethanol. Nevertheless, the mechanisms are still elusive. Herein, we describe how GBs tune the activity and selectivity for ethanol on two representative Cu-GB models, namely Cu∑3/(111) GB and Cu∑5/(100) GB, using joint first-principles calculations and experiments. The unique geometric structures on the GBs facilitate the adsorption of bidentate intermediates, *COOH and *CHO, which are crucial for CO₂ activation and CO protonation. The decreased CO-CHO coupling barriers on the GBs can be rationalized via kinetics analysis. Furthermore, when introducing GBs into Cu (100), the product is selectively switched from ethylene to ethanol, due to the stabilization effect for *CH₃CHO and inapposite geometric structure for *O adsorption, which are validated by experimental trends. An overall 12.5 A current and a single-pass conversion of 5.18% for ethanol can be achieved over the synthesized Cu-GB catalyst by scaling up the electrode into a 25 cm² membrane electrode assembly system.

Spatiotemporal Mapping of Local Heterogeneities during Electrochemical Carbon Dioxide Reduction

The activity and selectivity of a copper electrocatalyst during the electrochemical CO₂ reduction reaction (eCO₂RR) are largely dominated by the interplay between local reaction environment, the catalyst surface, and the adsorbed intermediates. In situ characterization studies have revealed many aspects of this intimate relationship between surface reactivity and adsorbed species, but these investigations are often limited by the spatial and temporal resolution of the analytical technique of choice. Here, Raman spectroscopy with both space and time resolution was used to reveal the distribution of adsorbed species and potential reaction intermediates on a copper electrode during eCO₂RR. Principal component analysis (PCA) of the in situ Raman spectra revealed that a working electrocatalyst exhibits spatial heterogeneities in adsorbed species, and that the electrode surface can be divided into CO-dominant (mainly located at dendrite structures) and C-C dominant regions (mainly located at the roughened electrode surface). Our spectral evaluation further showed that in the CO-dominant regions, linear CO was observed (as characterized by a band at ∼2090 cm^-1), accompanied by the more classical Cu-CO bending and stretching vibrations located at ∼280 and ∼360 cm^-1, respectively. In contrast, in the C-C directing region, these three Raman bands are suppressed, while at the same time a band at ∼495 cm^-1 and a broad Cu-CO band at ∼2050 cm^-1 dominate the Raman spectra. Furthermore, PCA revealed that anodization creates more C-C dominant regions, and labeling experiments confirmed that the 495 cm^-1 band originates from the presence of a Cu-C intermediate. These results indicate that a copper electrode at work is very dynamic, thereby clearly displaying spatiotemporal heterogeneities, and that in situ micro-spectroscopic techniques are crucial for understanding the eCO₂RR mechanism of working electrocatalyst materials.

Electrochemical Carbon Dioxide Reduction to Ethylene: From Mechanistic Understanding to Catalyst Surface Engineering

Electrochemical carbon dioxide reduction reaction (CO2RR) provides a promising way to convert CO2 to chemicals. The multicarbon (C2+) products, especially ethylene, are of great interest due to their versatile industrial applications. However, selectively reducing CO2 to ethylene is still challenging as the additional energy required for the C-C coupling step results in large overpotential and many competing products. Nonetheless, mechanistic understanding of the key steps and preferred reaction pathways/conditions, as well as rational design of novel catalysts for ethylene production have been regarded as promising approaches to achieving the highly efficient and selective CO2RR. In this review, we first illustrate the key steps for CO2RR to ethylene (e.g., CO2 adsorption/activation, formation of *CO intermediate, C-C coupling step), offering mechanistic understanding of CO2RR conversion to ethylene. Then the alternative reaction pathways and conditions for the formation of ethylene and competitive products (C1 and other C2+ products) are investigated, guiding the further design and development of preferred conditions for ethylene generation. Engineering strategies of Cu-based catalysts for CO2RR-ethylene are further summarized, and the correlations of reaction mechanism/pathways, engineering strategies and selectivity are elaborated. Finally, major challenges and perspectives in the research area of CO2RR are proposed for future development and practical applications.

Nanograin-Boundary-Abundant Cu2O-Cu Nanocubes with High C2+ Selectivity and Good Stability during Electrochemical CO2 Reduction at a Current Density of 500 mA/cm2

Surface and interface engineering, especially the creation of abundant Cu⁰/Cu⁺ interfaces and nanograin boundaries, is known to facilitate C₂₊ production during electrochemical CO₂ reductions over copper-based catalysts. However, precisely controlling the favorable nanograin boundaries with surface structures (e.g., Cu(100) facets and Cu[n(100)×(110)] step sites) and simultaneously stabilizing Cu⁰/Cu⁺ interfaces is challenging, since Cu⁺ species are highly susceptible to be reduced into bulk metallic Cu at high current densities. Thus, an in-depth understanding of the structure evolution of the Cu-based catalysts under realistic CO₂RR conditions is imperative, including the formation and stabilization of nanograin boundaries and Cu⁰/Cu⁺ interfaces. Herein we demonstrate that the well-controlled thermal reduction of Cu₂O nanocubes under a CO atmosphere yields a remarkably stable Cu₂O-Cu nanocube hybrid catalyst (Cu₂O(CO)) possessing a high density of Cu⁰/Cu⁺ interfaces, abundant nanograin boundaries with Cu(100) facets, and Cu[n(100)×(110)] step sites. The Cu₂O(CO) electrocatalyst delivered a high C₂₊ Faradaic efficiency of 77.4% (56.6% for ethylene) during the CO₂RR under an industrial current density of 500 mA/cm². Spectroscopic characterizations and morphological evolution studies, together with in situ time-resolved attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) studies, established that the morphology and Cu⁰/Cu⁺ interfacial sites in the as-prepared Cu₂O(CO) catalyst were preserved under high polarization and high current densities due to the nanograin-boundary-abundant structure. Furthermore, the abundant Cu⁰/Cu⁺ interfacial sites on the Cu₂O(CO) catalyst acted to increase the *CO adsorption density, thereby increasing the opportunity for C-C coupling reactions, leading to a high C₂₊ selectivity.

Investigation on the reaction kinetic mechanism of polydopamine-loaded copper as dual-functional catalyst in heterogeneous electro-Fenton process

Heterogeneous electro-Fenton (HEF) process has been regarded as a promising method in environmental remediation. However, the reaction kinetic mechanism of the HEF catalyst for simultaneous production and activation of H₂O₂ remained confounded. Herein, the copper supported on polydopamine (Cu/C) was synthesized by a facile method and employed as a bifunctional HEFcatalyst, and the catalytic kinetic pathways were deeply investigated by using rotating ring-disk electrode (RRDE) voltammetry based on the Damjanovic model. Experimental results substantiated that a two-electron oxygen reduction reaction (2e^- ORR) and a sequential Fenton oxidation reaction were proceeded on 1.0-Cu/C, where metallic copper played a crucial role in the fabrication of 2e^- active sites as well as utmost H₂O₂ activation to produce highly reactive oxygen species (ROS), resulting in the high H₂O₂ productivity (52.2%) and the almost complete removal of contaminant ciprofloxacin (CIP) after 90 min. The work not only expanded the idea of reaction mechanism on Cu-based catalyst in HEF process but also provided a promising catalyst for pollutants degradation in wastewater treatment.

Creating interfaces of Cu0/Cu+ in oxide-derived copper catalysts for electrochemical CO2 reduction to multi-carbon products

Electrochemical carbon dioxide reduction reaction (CO₂RR) is an effective approach to capture CO₂ and convert it into value-added chemicals and fuels, thereby reducing excess CO₂ emissions. Recent reports have shown that copper-based catalysts exhibit excellent performance in converting CO₂ into multi-carbon compounds and hydrocarbons. However, theselectivityto the couplingproductsispoor. Therefore, tuningCO₂-reductionselectivitytoward C₂₊productsover Cu-based catalyst is one of the most important issues in CO₂RR. Herein, we prepare a nanosheet catalyst with interfaces of Cu⁰/Cu⁺. The catalyst achieves Faraday efficiency (FE) of C₂₊ over 50% in a wide potential window between - 1.2 V to - 1.5 V versus reversible hydrogen electrode (vs. RHE). Moreover, the catalyst exhibits maximum FE of 44.5% and 58.9% towards C₂H₄ and C₂₊, with a partial current density of 10.5 mA cm^-2 at - 1.4 V. Density functional theory (DFT) calculations show that the interface of Cu⁰/Cu⁺ facilitates CC coupling to form C₂₊ products, while inhibits CO₂conversion toC₁products.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Organic Additive-derived Films on Cu Electrodes Promote Electrochemical CO2 Reduction to C2+ Products Under Strongly Acidic Conditions

Electrochemical CO₂ reduction (CO₂ R) at low pH is desired for high CO₂ utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO₂ R at low pH. Herein we report an alternative approach to selective CO₂ R (>70 % Faradaic efficiency for C₂₊ products, FE_C2+ ) at low pH (pH 2; H₃ PO₄ /KH₂ PO₄ ) and low potassium concentration ([K⁺ ]=0.1 M) using organic film-modified polycrystalline copper (Modified-Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified-Cu still achieves high FE_C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H₃ PO₄ (pH≈1) at low [K⁺ ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

Single-Site Metal-Organic Framework and Copper Foil Tandem Catalyst for Highly Selective CO2 Electroreduction to C2 H4

Tandem catalysis is a promising way to break the limitation of linear scaling relationship for enhancing efficiency, and the desired tandem catalysts for electrochemical CO₂ reduction reaction (CO₂ RR) are urgent to be developed. Here, a tandem electrocatalyst created by combining Cu foil (CF) with a single-site Cu(II) metal-organic framework (MOF), named as Cu-MOF-CF, to realize improved electrochemical CO₂ RR performance, is reported. The Cu-MOF-CF shows suppression of CH₄ , great increase in C₂ H₄ selectivity (48.6%), and partial current density of C₂ H₄ at -1.11 V versus reversible hydrogen electrode. The outstanding performance of Cu-MOF-CF for CO₂ RR results from the improved microenvironment of the Cu active sites that inhibits CH₄ production, more CO intermediate produced by single-site Cu-MOF in situ for CF, and the enlarged active surface area by porous Cu-MOF. This work provides a strategy to combine MOFs with copper-based electrocatalysts to establish high-efficiency electrocatalytic CO₂ RR.

Grain Boundary-Rich Copper Nanocatalysts Generated from Metal-Organic Framework Nanoparticles for CO2 -to-C2+ Electroconversion

Due to severe contemporary energy issues, generating C₂₊ products from electrochemical carbon dioxide reduction reactions (eCO₂ RRs) gains much interest. It is known that the catalyst morphology and active surface structures are critical for product distributions and current densities. Herein, a synthetic protocol of nanoparticle morphology on copper metal-organic frameworks (n-Cu MOFs) is developed by adjusting growth kinetics with termination ligands. Nanoscale copper oxide aggregates composed of small particulates are yielded via calcining the Cu-MOF nanoparticles at a specific temperature. The resulting nanosized MOF-derived catalyst (n-MDC) exhibits Faradaic efficiencies toward ethylene and C₂₊ products of 63% and 81% at -1.01 V versus reversible hydrogen electrode (RHE) in neutral electrolytes. The catalyst also shows prolonged stability for up to 10 h. A partial current density toward C₂₊ products is significantly boosted to -255 mA cm^-2 in an alkaline flow cell system. Comprehensive analyses reveal that the nanoparticle morphology of pristine Cu MOFs induces homogeneous decomposition of organic frameworks at a lower calcination temperature. It leads to evolving grain boundaries in a high density and preventing severe agglomeration of copper domains, the primary factors for improving eCO₂ RR activity toward C₂₊ production.

Copper-Based Catalysts for Electrochemical Reduction of Carbon Dioxide to Ethylene

Electrochemical reduction of CO₂ into high energy density multi-carbon chemicals or fuels (e. g., ethylene) via new renewable energy storage has extraordinary implications for carbon neutrality. Copper (Cu)-based catalysts have been recognized as the most promising catalysts for the electrochemical reduction of CO₂ to ethylene (C₂ H₄ ) due to their moderate CO adsorption energy and moderate hydrogen precipitation potential. However, the poor selectivity, low current density and high overpotential of the CO₂ RR into C₂ H₄ greatly limit its industrial applications. Meanwhile, the complex reaction mechanism is still unclear, which leads to blindness in the design of catalysts. Herein, we systematically summarized the latest research, proposed possible conversion mechanisms and categorized the general strategies to adjust of the structure and composition for CO₂ RR, such as tip effect, defect engineering, crystal plane catalysis, synergistic effect, nanoconfinement effect and so on. Eventually, we provided a prospect of the future challenges for further development and progress in CO₂ RR. Previous reviews have summarized catalyst designs for the reduction of CO₂ to multi-carbon products, while lacking in targeting C₂ H₄ alone, an important industrial feedstock. This Review mainly aims to provide a comprehensive understanding for the design strategies and challenges of electrocatalytic CO₂ reduction to C₂ H₄ through recent researches and further propose some guidelines for the future design of copper-based catalysts for electroreduction of CO₂ to C₂ H₄ .

Highly selective electrocatalytic reduction of nitrate to nitrogen in a chloride ion-free system by promoting kinetic mass transfer of intermediate products in a novel Pd-Cu adsorption confined cathode

The mass transfer on the catalyst surface has a great influence on the selectivity of electrocatalytic nitrate reduction to nitrogen. In this study, a Pd-Cu adsorption confined nickel foam cathode is designed in the absence of both proton exchange membranes and chloride ions. The repulsion of the cathode enables intermediate products such as nitrite to accumulate in the confined region, resulting in an increase in the possibility of a second-order reaction to form nitrogen. The system can obtain more than 92% continuous N₂ selectivity when it is used to treat 200 mg L^-1 NO₃^--N under a current density of 8 mA cm^-2, which is not only higher than those of semiconfined and nonconfined systems but also significantly better than the results obtained by Pd-Cu directly modified cathodes prepared by electrodeposition or impregnation. It is found that a high initial nitrate concentration and low current density are more beneficial for the accumulation of intermediates on Pd-Cu catalysts, thus improving the formation of nitrogen. A mechanism study reveals that the intermediates can completely occupy the active sites on the surface of Pd, avoiding the generation of active hydrogen, and therefore inhibiting the first-order reaction to produce ammonia. Moreover, the reducibility of Pd-Cu can also be gradually improved under the function of the cathode so that the system exhibits good stability. This study demonstrates an environmentally friendly and promising method for total nitrogen removal from industrial wastewater with high conductivity.

Molecular Assembled Electrocatalyst for Highly Selective CO2 Fixation to C2+ Products

In certain metalloenzymes, multimetal centers with appropriate primary/secondary coordination environments allow carbon-carbon coupling reactions to occur efficiently and with high selectivity. This same function is seldom realized in molecular electrocatalysts. Herein we synthesized rod-shaped nanocatalysts with multiple copper centers through the molecular assembly of a triphenylphosphine copper complex (CuPPh). The assembled molecular CuPPh catalyst demonstrated excellent electrochemical CO₂ fixation performance in aqueous solution, yielding high-value C₂₊ hydrocarbons (ethene) and oxygenates (ethanol) as the main products. Using density functional theory (DFT) calculations, in situ X-ray absorption spectroscopy (XAS) and quasi-in situ X-ray photoelectron spectroscopy (XPS), and reaction intermediate capture, we established that the excellent catalytic performance originated from the large number of double copper centers in the rod-shaped assemblies. Cu-Cu distances in the absence of CO₂ were as long as 7.9 Å, decreasing substantially after binding CO₂ molecules indicating dynamic and cooperative function. The double copper centers were shown to promote carbon-carbon coupling via a CO₂ transfer-coupling mechanism involving an oxalate (OOC-COO) intermediate, allowing the efficient production of C₂₊ products. The assembled CuPPh nanorods showed high activity, excellent stability, and a high Faradaic efficiency (FE) to C₂₊ products (65.4%), with performance comparable to state-of-the-art copper oxide-based catalysts. To our knowledge, our findings demonstrate that harnessing metalloenzyme-like properties in molecularly assembled catalysts can greatly improve the selectivity of CO2RR, promoting the rational design of improved CO2 reduction catalysts.

Stabilization of Ni0/NiII Heterojunctions inside Robust Porous Metal Silicate Materials for High-Performance Catalysis

Heterostructural nanomaterials demonstrate great potential to replace noble metal-based catalysts because heterojunctions could induce relocalization of electrons and facilitate the migration of electrons and charge carriers at the heterostructural boundary between electron-rich and electron-deficient metal sites; however, the instability of heterojunctions greatly hinders their practical applications. We report herein an effective strategy for the fabrication and stabilization of Ni⁰/Ni^II heterojunctions inside a porous metal silicate (PMS) material PMS-22 using a nickel coordination complex as the bifunctional template. The synergistic activity between metallic nickel and nickel silicate in PMS-22 highly boosts the catalytic activity in the hydrogenation of phenol, which could activate phenol at a very low temperature of 50 °C. Most importantly, PMS-22 demonstrates robust stability in catalysis, attributed to the strong interaction and charge transfer between metallic Ni and nickel silicate at the heterointerfaces inside the confined pores. Therefore, this work paves a new pathway to improve the stability and activity of heterostructural nanomaterials for catalytic applications.

In Situ Engineering of the Cu+/Cu0 Interface to Boost C2+ Selectivity in CO2 Electroreduction

The Cu⁺/Cu⁰ interface in the Cu-based electrocatalyst is essential to promote the electrochemical reduction of carbon dioxide (ERCO₂) to produce multi-carbon hydrocarbons and alcohols with high selectivity. However, due to the high activity of the Cu⁺/Cu⁰ interface, it is easy to be oxidized in the air. How to control and prepare a Cu-based electrocatalyst with an abundant and stable Cu⁺/Cu⁰ interface in situ is a huge challenge. Here, combined with density functional theory (DFT) calculations and experimental studies, we found that the trace halide ions adsorbed on Cu₂O can slow the reduction kinetics of Cu⁺ → Cu⁰, which allowed us to in-situ well control the synthesis of the CuO-derived electrocatalyst with rich Cu⁺/Cu⁰ interfaces. Our Cu catalyst with a rich Cu⁺/Cu⁰ interface exhibits excellent ERCO₂ performance. Under the operation potential of -0.98 V versus RHE, the Faraday efficiency of C₂H₄ and C₂₊ products are 55.8 and 75.7%, respectively, which is about 16% higher than that of CuO-derived electrocatalysts that do not use halide ions. The high FEC2+ comes from the improvement of the coupling efficiency of reaction intermediates such as CO-CO, which is proved by DFT calculations, and the suppression of hydrogen evolution reaction. Therefore, we provide an in-situ engineering strategy, which is simple and effective for the design and preparation of high-performance ERCO₂ catalysts.