Iodide-Induced Fragmentation of Polymerized Hydrophilic Carbon Nitride for High-Performance Quasi-Homogeneous Photocatalytic H2 O2 Production

In situ single iron atom doping on Bi2WO6 monolayers triggers efficient photo-fenton reaction

Developing an efficient photocatalytic system for hydrogen peroxide (H2O2) activation in Fenton-like processes holds significant promise for advancing water purification technologies. However, challenges such as high carrier recombination rates, limited active sites, and suboptimal H2O2 activation efficiency impede optimal performance. Here we show that single-iron-atom dispersed Bi2WO6 monolayers (SIAD-BWOM), designed through a facile hydrothermal approach, can offer abundant active sites for H2O2 activation. The SIAD-BWOM catalyst demonstrates superior photo-Fenton degradation capabilities, particularly for the persistent pesticide dinotefuran (DNF), showcasing its potential in addressing recalcitrant organic pollutants. We reveal that the incorporation of iron atoms in place of tungsten within the electron-rich [WO4]2- layers significantly facilitates electron transfer processes and boosts the Fe(II)/Fe(III) cycle efficiency. Complementary experimental investigations and theoretical analyses further elucidate how the atomically dispersed iron induces lattice strain in the Bi2WO6 monolayer, thereby modulating the d-band center of iron to improve H2O2 adsorption and activation. Our research provides a practical framework for developing advanced photo-Fenton catalysts, which can be used to treat emerging and refractory organic pollutants more effectively.

S-scheme NiO/C3N5 heterojunctions with enhanced interfacial electric field for boosting photothermal-assisted photocatalytic H2 and H2O2 production

Heterostructured visible-light-responsive photocatalysts represent a prospective approach to achieve efficient solar-to-chemical energy conversion. Herein, we propose a facile self-assembly technique to synthesize NiO nanoparticles/C3N5 nanosheets (NOCN) heterojunctions for hydrogen (H2) evolution catalysis and hydrogen peroxide (H2O2) production under visible light. In this regard, the black NiO nanoparticles (NPs) were tightly anchored on the surface of C3N5 nanosheets (CNNS) to construct S-scheme NOCN heterojunction, enabling efficient charge separation and high redox capability. Obtained results elucidated that the incorporated NiO NPs significantly promote light-harvesting efficiency and photo-to-thermal capacity over the NOCN composites. The enhanced photothermal effect facilitates the charge carrier transfer rate across the heterojunction and boosts the surface reaction kinetics. Accordingly, the photocatalytic performances of CNNS for H2 release and H2O2 production can be manipulated by introducing NiO NPs. The modified photocatalytic properties of NOCN composites are ascribed to the synergistic effects of all integrated components and the S-scheme heterojunction formation. Impressively, the high H2 evolution photocatalysis efficiency of NOCN nano-catalysts in seawater certifies their potential environmental applicability. Among all, the 12-NOCN nano-catalyst exhibits a higher photocatalytic efficiency for H2 release (112.2 μmol∙g-1∙h-1) and H2O2 production (91.2 μmol∙L-1∙h-1). Besides, the 12-NOCN nano-catalyst reveals excellent recyclability and structural stability. Additionally, the possible mechanism for photothermal-assisted photocatalysis is proposed. This work affords a feasible pathway to design photothermal-assisted S-scheme heterojunctions for diverse photocatalytic applications.

Unraveling the pyridinic nitrogen vacancy in carbon nitride for photo-self Fenton-like purification of organic contaminants

This work reports a carbon nitride with pyridinic nitrogen-vacancy (N2CV-CN), which purifies organic contaminants via an in-situ photo-self Fenton-like reaction. Experiments and calculations demonstrated that the nitrogen-vacancy induces lone-paired (LP) and symmetry-unpaired electrons, promoting the formation of low-energy LP-π hybridized orbitals and helping to overcome the pairing energy required for oxygen to accept electrons. Furthermore, the nitrogen-vacancy accelerates film and intra-particle diffusion rates of organic contaminants on N2CV-CN, creating beneficial conditions for reactive oxide species to mineralize organic contaminants. Under sunlight and atmospheric oxygen, a photo-self Fenton-like reaction involving proton-coupled electron transfer occurred on the surface of N2CV-CN. Furthermore, by integrating photocatalysis with flocculation, about 99.1 % suspended substance, 45.5 % chemical oxygen demand, and 38.4 % biological oxygen demand were reduced from polluted river-water. Constructing N2CV-CN and understanding its crucial role offer theoretical and methodological insights into the in-situ purification of contaminated water bodies.

Heterogeneous organophotocatalytic HBr oxidation coupled with oxygen reduction for boosting bromination of arenes

Developing mild photocatalytic bromination strategies using sustainable bromo source has been attracting intense interests, but there is still much room for improvement. Full utilization of redox centers of photocatalysts for efficient generation of Br+ species is the key. Herein we report heterogenous organophotocatalytic HBr oxidation coupled with oxygen reduction to furnish Br2 and H2O2 for effective bromination of arenes over Al2O3 supported perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). Mechanism studies suggest that O-vacancy in Al2O3 can provide Lewis-acid-type anchoring sites for O2, enabling unexpected dual-electron transfer from anchored photoexcited PTCDA to chemically bound O2 to produce H2O2. The in-situ generated H2O2 and Br2 over redox centers work together to generate HBrO for bromination of arenes. This work provides new insights that heterogenization of organophotocatalysts can not only help to improve their stability and recyclability, but also endow them with the ability to trigger unusual reaction mode via cooperative catalysis with supports.

Circumventing bottlenecks in H2O2 photosynthesis over carbon nitride with iodine redox chemistry and electric field effects

Artificial photosynthesis using carbon nitride (g-C3N4) holds a great promise for sustainable and cost-effective H2O2 production, but the high carrier recombination rate impedes its efficiency. To tackle this challenge, we propose an innovative method involving multispecies iodine mediators (I-/I3-) intercalation through a pre-photo-oxidation process using potassium iodide (suspected deteriorated "KI") within the g-C3N4 framework. Moreover, we introduce an external electric field by incorporating cationic methyl viologen ions to establish an auxiliary electron transfer channel. Such a unique design drastically improves the separation of photo-generated carriers, achieving an impressive H2O2 production rate of 46.40 mmol g-1 h-1 under visible light irradiation, surpassing the most visible-light H2O2-producing systems. Combining various advanced characterization techniques elucidates the inner photocatalytic mechanism, and the application potential of this photocatalytic system is validated with various simulation scenarios. This work presents a significative strategy for preparing and applying highly efficient g-C3N4-based catalysts in photochemical H2O2 production.

Tandem Fields Facilitating Directional Carrier Migration in Van der Waals Heterojunction for Efficient Overall Piezo-Synthesis of H2O2

Piezo-synthesis of H2O2 utilizing sustainable mechanical energy as well as earth-abundant water and oxygen is a green, cost-effective, and promising approach. However, achieving simultaneous two-electron water oxidation reaction (2e- WOR) and two-electron oxygen reduction reaction (2e- ORR) faces huge challenges due to insufficient synergistic active sites and slow/messy carrier transfer. Herein, a novel 2D/2D van der Waals heterojunction consisting of BiOIO3 and carbon nitride (BIO/CN) is elaborately designed for highly efficient overall H2O2 piezo-synthesis. Theoretical/experimental results reveal that a Z-scheme electron transfer is formed and facilitated by the tandem interfacial electric field and the bulk piezo-polarization field. On this basis, the carriers are efficiently separated while the oxidation/reduction capacity is preserved, thus providing the strong driving force for the 2e- WOR and 2e- ORR on BIO and CN, respectively. Furthermore, the kinetic and thermodynamic processes of WOR and ORR for H2O2 synthesis improve remarkably. Therefore, BIO/CN exhibits an excellent H2O2 yield of 259.8 µM within 30 min in pure water and air atmosphere (without any sacrificial agents and aeration). This study provides a new idea on strategically controlling electron transfer toward high-efficiency H2O2 piezo-synthesis and expands the avenue for developing effective environmental purification materials.

Vinyl-Group-Anchored Covalent Organic Framework for Promoting the Photocatalytic Generation of Hydrogen Peroxide

The artificial photosynthesis of H2O2 from water and oxygen using semiconductor photocatalysts is attracting increasing levels of attention owing to its green, environmentally friendly, and energy-saving characteristics. Although covalent organic frameworks (COFs) are promising materials for promoting photocatalytic H2O2 production owing to their structural and functional diversity, they typically suffer from low charge-generation and -transfer efficiencies as well as rapid charge recombination, which restricts their use as catalysts for photocatalytic H2O2 production. Herein, we report a strategy for anchoring vinyl moieties to a COF skeleton to facilitate charge separation and migration, thereby promoting photocatalytic H2O2 generation. This vinyl-group-bearing COF photocatalyst exhibits a H2O2-production rate of 84.5 μmol h-1 (per 10 mg), which is ten-times higher than that of the analog devoid of vinyl functionality and superior to most reported COF photocatalysts. Both experimental and theoretical studies provide deep insight into the origin of the improved photocatalytic performance. These findings are expected to facilitate the rational design and modification of organic semiconductors for use in photocatalytic applications.

Doping and defects in carbon nitride cause efficient in situ H2O2 synthesis to allow efficient photocatalytic sterilization

In situ photocatalytic synthesis of H2O2 for disinfection has attracted widespread attention because it is a clean and environmentally friendly sterilization method. Graphitic carbon nitride has been used as a very selective photocatalyst for H2O2 generation but has some limitations (e.g., insufficient light absorption, rapid electron-hole recombination, and slow direct two-electron reduction processes) that prevent efficient H2O2 production. In this study, potassium-doped graphite carbon nitride with nitrogen vacancies (NDKCN) was prepared using a simple method involving a thermal fusion salt and N2 calcination, which possessed an ultrathin nanosheet structure (1.265 nm) providing abundant active sites. Synergistic effects caused by nitrogen vacancies and K+ and I- doping in the NDKCN photocatalyst gave the NDKCN a good ability to absorb light, undergo fast charge transfer, and give a high photoelectric current response. The optimized photocatalytic H2O2 yield of the NDKCN was 780.1 μM·g-1·min-1, which was 10 times the yield of the pristine g-C3N4. Tests involving quenching reactive species, electron spin resonance, and rotating disk electrodes indicated that one-step two-electron direct reduction on the NDKCN caused excellent H2O2 generation performance. The ability to efficiently generate H2O2 in situ gave NDKCN an excellent bactericidal performance, and 7.3 log10 (colony-forming units·mL-1) of Escherichia coli were completely eliminated within 80 min. Scanning electron microscopy images before and after sterilization indicated the changes in bacteria caused by the catalytic activity. The new g-C3N4-based photocatalyst and similar rationally designed photocatalysts with doping and defects offer efficient and simple in situ H2O2 sterilization.

Recent developments in photocatalytic production of hydrogen peroxide

Hydrogen peroxide (H2O2), an environmentally friendly strong oxidant and energy carrier, has attracted widespread attention in photocatalysis. Artificial photosynthesis of H2O2 using water and oxygen as raw materials, solar energy as an energy source, and semiconductor materials as catalysts is considered a promising technology. In the past few decades, encouraging progress has been made in the photocatalytic production of H2O2. Therefore, we summarize the research achievements in this field in recent years. This review first briefly introduces the reaction pathway, detection techniques and evaluation metrics. Then, the recent advances in photocatalysts are highlighted. Furthermore, the existing challenges and possible solutions in this field are presented. At last, we look forward to the future development direction of this field. This review provides valuable insights and guidance for efficient photocatalytic H2O2 production.

Iron complex regulated synergistic effect between the current and peroxymonosulfate enhanced ultrafast oxidation of perfluorooctanoic acid via free radical dominant electrochemical reaction

Iron complex regulated electrochemical reaction was triggered for revealing the reaction mechanism, degradation pathway, and applied potential of perfluorooctanoic acid (PFOA). The increased PMS concentrations, electrode spacing, and current density significantly enhanced PFOA elimination, with current density exhibiting a relatively strong interdependency to PFOA complete mineralization. The synergy between PMS and electrochemical reactions greatly accelerated PFOA decomposition by promoting the generation of key reaction sites, such as those for PMS activation and electrochemical processes, under various conditions. Furthermore, density functional theory calculations confirmed that the reciprocal transformation of Fe2+ and Fe3+ complexes was feasible under the electrochemical effect, further promoting the generation of active sites. The developed electrochemical oxidation with PMS reaction (EO/PMS) system can rapidly decompose and mineralize PFOA while maintaining strong tolerance to changing water matrices and organic and inorganic ions. Overall, it holds promise for use in treating and purifying wastewater containing PFOA.

Tailored Exfoliation of Polymeric Carbon Nitride for Photocatalytic H2O2 Production and CH4 Valorization Mediated by O2 Activation

The exfoliation of bulk C3N4 (BCN) into ultrathin layered structure is an effective strategy to boost photocatalytic efficiency by exposing interior active sites and accelerating charge separation and transportation. Herein, we report a novel nitrate anion intercalation-decomposition (NID) strategy that is effective in peeling off BCN into few-layer C3N4 (fl-CN) with tailored thickness down to bi-layer. This strategy only involves hydrothermal treatment of BCN in diluted HNO3 aqueous solution, followed by pyrolysis at various temperatures. The decomposition of the nitrate anions not only exfoliates BCN and changes the band structure, but also incorporates oxygen species onto fl-CN, which is conducive to O2 adsorption and hence relevant chemical processes. In photocatalytic O2 reduction under visible light irradiation, the H2O2 production rate over the optimal fl-CN-530 catalyst is 952 μmol g-1 h-1, which is 8.8 times that over BCN. More importantly, under full arc irradiation and in the absence of hole scavenger, CH4 can be photocatalytically oxidized by on-site formed H2O2 and active oxygen species to generate value-added C1 oxygenates with high selectivity of 99.2 % and record-high production rate of 1893 μmol g-1 h-1 among the metal-free C3N4-based photocatalysts.

12 Connecting Sites Linked Three-dimensional Covalent Organic Frameworks with Intrinsic Non-interpenetrated shp Topology for Photocatalytic H2O2 Synthesis

Developing high connectivity (>8) three-dimensional (3D) covalent organic frameworks (COFs) towards new topologies and functions remains a great challenge owing to the difficulty in getting high connectivity organic building blocks. This however represents the most important step towards promoting the diversity of COFs due to the still limited dynamic covalent bonds available for constructing COFs at this stage. Herein, highly connected phthalocyanine-based (Pc-based) 3D COFs MPc-THHI-COFs (M=H2, Ni) were afforded from the reaction between 2,3,9,10,16,17,23,24-octacarboxyphthalocyanine M(TAPc) (M=H2, Ni) and 5,5',5'',5''',5'''',5'''''-(triphenylene-2,3,6,7,10,11-hexayl)hexa(isophthalohydrazide) (THHI) with 12 connecting sites. Powder X-ray diffraction analysis together with theoretical simulations and transmission electron microscopy reveals their crystalline nature with an unprecedented non-interpenetrated shp topology. Experimental and theoretical investigations disclose the broadened visible light absorption range and narrow optical band gap of MPc-THHI-COFs. This in combination with their 3D nanochannels endows them with efficient photocatalysis performance for H2O2 generation from O2 and H2O via 2e- oxygen reduction reaction and 2e- water oxidation reaction under visible-light irradiation (λ >400 nm). This work provides valuable result for the development of high connectivity functional COFs towards diverse application potentials.

Single Zn Atoms with Acetate-Anion-Enabled Asymmetric Coordination for Efficient H2 O2 Photosynthesis

Exploring unique single-atom sites capable of efficiently reducing O2 to H2 O2 while being inert to H2 O2 decomposition under light conditions is significant for H2 O2 photosynthesis, but it remains challenging. Herein, we report the facile design and fabrication of polymeric carbon nitride (CN) decorated with single-Zn sites that have tailorable local coordination environments, which is enabled by utilizing different Zn salt anions. Specifically, the O atom from acetate (OAc) anion participates in the coordination of single-Zn sites on CN, forming asymmetric Zn-N3 O moiety on CN (denoted as CN/Zn-OAc), in contrast to the obtained Zn-N4 sites when sulfate (SO4 ) is adopted (CN/Zn-SO4 ). Both experimental and theoretical investigations demonstrate that the Zn-N3 O moiety exhibits higher intrinsic activity for O2 reduction to H2 O2 than the Zn-N4 moiety. This is attributed to the asymmetric N/O coordination, which promotes the adsorption of O2 and the formation of the key intermediate *OOH on Zn sites due to their modulated electronic structure. Moreover, it is inactive for H2 O2 decomposition under both dark and light conditions. As a result, the optimized CN/Zn-OAc catalyst exhibits significantly improved photocatalytic H2 O2 production activity under visible light irradiation.

Light-Induced Variation of Lithium Coordination Environment in g-C3N4 Nanosheet for Highly Efficient Oxygen Reduction Reactions

The structure and electronic state of the active center in a single-atom catalyst undergo noticeable changes during a dynamic catalytic process. The metal atom active center is not well demonstrated in a dynamic manner. This study demonstrated that Li metal atoms, serving as active centers, can migrate on a C3N4 monolayer or between C3N4 monolayers when exposed to light irradiation. This migration alters the local coordination environment of Li in the C3N4 nanosheets, leading to a significant enhancement in photocatalytic activity. The photocatalytic H2O2 process could be maintained for 35 h with a 920 mmol/g record-high yield, corresponding to a 0.4% H2O2 concentration, which is far greater than the value (0.1%) of practical application for wastewater treatment. Density functional theory calculations indicated that dynamic Li-coordinated structures contributed to the superhigh photocatalytic activity.

Cyano-Rich g-C3 N4 in Photochemistry: Design, Applications, and Prospects

Cyano-rich g-C3 N4 materials are widely used in various fields of photochemistry due to the very powerful electron-absorbing ability and electron storage function of cyano, as well as its advantages in improving light absorption, adjusting the energy band structure, increasing the polarization rate and electron density in the structure, active site concentration, and promoting oxygen activation ability. Notwithstanding, there is yet a huge knowledge break in the design, preparation, detection, application, and prospect of cyano-rich g-C3 N4 . Accordingly, an overall review is arranged to substantially comprehend the research progress and position of cyano-rich g-C3 N4 materials. An overall overview of the current research position in the synthesis, characterization (determination of their location and quantity), application, and reaction mechanism analysis of cyano-rich g-C3 N4 materials to provide a quantity of novel suggestions for cyano-modified carbon nitride materials' construction is provided. In view of the prevailing challenges and outlooks of cyano-rich g-C3 N4 materials, this paper will purify the growth direction of cyano-rich g-C3 N4 , to achieve a more in-depth exploration and broaden the applications of cyano-rich g-C3 N4 .

Highly Hydrophilic and Defective Carbon Nitride for Enhanced Photocatalytic Hydrogen Evolution

Graphitic carbon nitride (g-C3N4), as a kind of nonmetallic low-cost photocatalyst, has great potential in photocatalytic hydrogen (H2) evolution, but its poor hydrophilicity and nonwetting extremely limit its H2 evolution efficiency. Herein, highly hydrophilic and defective g-C3N4 photocatalysts (NH3-CN-P as a representative example) have been fabricated on the basis of the strategy of joint phosphorus doping and ammonia stripping. The dopant of phosphorus prefers to occupy the C atoms bonded to -NH2 groups in the g-C3N4 skeleton, which is conducive to the formation of N defects caused by the effects of electronegativity and charge balance. Moreover, ammonia stripping plays a dual role in exposing plentiful two-dimensional defective planar structure and implanting the hydrophilic groups on the surface. As expected, the photocatalytic H2 evolution property of NH3-CN-P reaches 11.31 mmol g-1 h-1, with an apparent quantum yield of 17.9% at 420 nm, outperforming the majority of the reported g-C3N4-based photocatalysts.

Electronic configuration inversion in CdIn2S4 for efficient photocatalytic hydrogen peroxide generation coupled with selective benzylamine oxidation

Vacancies engineering has sparked a huge interest in enhancing photocatalytic activity, but monovacancy simultaneously conducts as either electron or hole acceptor and redox reaction, worsening charge transfer and catalytic performance. Here, the concept of electronic inversion has been proposed through the simultaneous introduction of surface oxygen and S vacancies in CdIn2S4 (OSv-CIS). Consequently, under mild conditions, the well-designed OSv-CIS-200 demonstrated a strong rate of N-benzylidenebenzylamine production (2972.07 µmol g-1 h-1) coupled with Hydrogen peroxide (H2O2) synthesis (2362.33 µmol g-1 h-1) (PIH), which is 12.4 times higher than that of CdIn2S4. Density functional theory (DFT) simulation and characterization studies demonstrate that oxygen is introduced into the lattice on the surface of the material, reversing the charge distribution of the S vacancy and enhancing the polarity of the total charge distribution. It not only provides a huge built-in electric field (BEF) for guiding the orientation of the charge transfer, but also acts as a long-distance active site to accelerate reaction and prevent H2O2 decomposition. Our work offers a straightforward connection between the atomic defect and intrinsic properties for designing high-efficiency materials.

A quadruple-strategy of modification on carbon nitride boosts oxygen reduction for high performance photocatalytic hydrogen peroxide production

This paper reports a quadruple-strategy for material design, simultaneously applying morphology control, group modification, defect engineering and alkali metal doping to the design of catalysts, and successfully constructing irregular clusters of carbon nitride (pMNK-CN) with excellent photogenerated carrier separation performance and structural stability. The pMNK-CN is an irregular flower cluster-like morphology with a nanosheet structure on the surface, and the repolymerization process of the prepolymer in the microvoid of the metal salt gives it an open pore structure. With the help of essential characterization, it was confirmed that the heptazine unit in the backbone underwent partial decomposition due to the etching of metal salts at high temperatures, reducing the overall polymerization and introducing cyano and nitrogen vacancies. Meanwhile, the potassium ion embedded in the lattice can induce the growth of ordered structures and thus improve the short-range order. The pMNK-CN possesses a hydrogen peroxide production efficiency of 240.0 μmol·g-1·h-1 in pure water, which is 31 times higher than that of bulk carbon nitride. And the apparent quantum efficiencies of pMNK-CN in the 380 and 420 nm bands are 17.5 % and 14.8 % in the presence of isopropanol. The effects of each modification strategies on the electronic structure of carbon nitride were investigated using First-Principles, and it was demonstrated that the multiple modification strategies synergistically enhanced the optical absorption, photogenerated charge separation efficiency, and lowered the reaction energy barrier, thus greatly contributing to the oxygen reduction to hydrogen peroxide performance.

Molecular Heptazine-Triazine Junction over Carbon Nitride Frameworks for Artificial Photosynthesis of Hydrogen Peroxide

Revealing the photocatalytic mechanism between various junctions and catalytic activities has become a hotspot in photocatalytic systems. Herein, an internal molecular heptazine/triazine (H/T) junction in crystalline carbon nitride (HTCN) is constructed and devoted to selective two-electron oxygen reduction reaction (2e- ORR) for efficient hydrogen peroxide (H2 O2 ) production. In-situ X-ray diffraction spectra under various temperatures authenticate the successful formation of molecular H/T junction in HTCN during the calcining process rather than physically mixing. The increased surface photovoltage and transient photovoltage signals, and the decreased exciton binding energy undoubtably elucidate that an obvious increasement of carrier density and diffusion capability of photogenerated electrons are realized over HTCN. Additionally, the analyses of in situ photoirradiated Kelvin probe force microscopy and femto-second transient absorption spectra reveal the successful construction of the strong internal built-in-electric field and the existence of the majority of long-lived shallow trapped electrons associated with molecular H/T junction over HTCN, respectively. Benefiting from these, the photocatalytic results exhibit an incredible improvement (96.5-fold) for H2 O2 production. This novel work provides a comprehensive understanding of the long-lived reactive charges in molecular H/T junctions for strengthening the driving-force for photocatalytic H2 O2 production, which opens potential applications for enhancing PCN-based photocatalytic redox reactions.

Strategies for promoting the degradation of phenol by electro-Fenton: Simultaneously promoting the generation and utilization of H2O2

The use of the electro-Fenton process to continuously generate H2O2 and efficiently degrade organic pollutants is considered a promising technology. The ratio of generation of H2O2 is usually regarded as the critical step; however, how the H2O2 is utilized is also of particular importance. Herein, activated carbon was activated at different temperatures and used to explore the effect of nitrogen doping on the production and utilization of H2O2 in the electro-Fenton-based degradation of organic pollutants. The experimental results indicate that nitrogen-doped activated carbon simultaneously promotes the generation and utilization of H2O2, which is attributed to the regulation of the competition between phenol and O2 adsorption by the doped nitrogen. Nitrogen doping not only improves 2e-ORR selectivity but also aggregates phenol near the cathode to balance the concentrations of phenol and ·OH. Density functional theory (DFT) calculations further confirmed that pyrrole-N as a dopant promoted the adsorption of phenol, while pyridine-N was more favorable for O2 adsorption. The unique balance of nitrogen types possessed by modified activated carbon NAC-750 permits the efficient synergistic generation and utilization of H2O2 in a balanced manner during the degradation of phenol. This work provides a new direction for the rational nitrogen-doping modification of activated carbon for the electro-Fenton-based degradation of organic pollutants.

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2 O2 Production

Developing highly efficient catalytic sites for O2 reduction to H2 O2 , while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H2 O2 photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal-organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H2 O2 production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O4 ) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e- O2 reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H2 O2 production activity and excellent stability under visible light irradiation.

n→π* Electron Transitions and Directional Charge Migration Synergistically Promoting O2 Activation and Holes Utilization on Carbon Nitride for Efficiently Photocatalytic Degradation of Organic Contaminants

Stimulating electron transitions and promoting exciton dissociation are crucial for improving the photocatalytic performance of polymeric carbon nitride (CN) yet still challenging. Herein, a novel CN with C dopant and asymmetric structure (CC-UCN2 ) is ingeniously synthesized. The obtained CC-UCN2 not only reinforces the intrinsic π→π* electron transitions, but also successfully awakens additional n→π* electron transitions. Besides, charge centers dislocation caused by symmetry breaking induces a spontaneous polarized electric field, effectively breaking the constraints of Coulomb electrostatic interaction between electrons and holes and driving their directional migration. Along with the spatial separation of reduction and oxidation sites, CC-UCN2 shows exceptional O2 activation and holes oxidation efficiency, thus exhibits a high degradation rate constant (0.201 min-1 ) and mineralization rate (80.1%) for bisphenol A (BPA)(far outperforming pristine and other modified CNs). This work proposes a novel perspective for developing high-efficiency photocatalysts and comprehending the underlying mechanism of O2 activation and holes oxidation for pollutant degradation.

Synergy of Bulk Defects and Surface Defects on TiO2 for Highly Efficient Photocatalytic Production of H2O2

Artificial photosynthesis of H2O2 by TiO2-based semiconductors is a promising approach for H2O2 production. However, the efficiency of pristine TiO2 is still limited by rapid charge separation and low O2 adsorption capacity. Here, we found that the synergy between bulk and surface defects on TiO2 could overcome this demanding bottleneck. The introduced bulk defects act as hole acceptors to induce directional hole transfer, efficiently boosting electron-hole separation. Furthermore, the adsorption of O2 is strengthened by the introduced surface defects. Consequently, this synergy of bulk and surface defects on TiO2 significantly improves the photocatalytic performance, with a H2O2 production rate of 4560 μmol h-1 g-1, outperforming most reported TiO2-based photocatalysts. This work not only provides a new insight into the mechanism of surface/bulk defects in photocatalysis but also highlights that surface/bulk regulation holds great promise for achiveing efficient photocatalytic conversion.

Effect of molten-salt modulation on the composition and structure of g-C3N4-based photocatalysts

Graphitic carbon nitride (g-C3N4), as an attractive metal-free polymer photocatalyst, has attracted extensive attention in energy and environmental fields in recent years. The photoactivity of bulk g-C3N4 is moderate on account of solid-phase thermal-condensation synthesis. This leads to inadequate light absorption, limited surface area, and easy recombination of charge carriers. The composition and nanostructure of g-C3N4 have been studied extensively. Molten-salt modulation is fascinating because of its "green" credentials and the properties of liquid-phase reaction systems. The review focuses mainly on molten-salt modulation of the composition and structure of g-C3N4 based-photocatalysts. We focus on elemental doping, molecular doping, and defect engineering, as well as control of the crystal structure, multi-dimensional structure, hom/heterostructures for photocatalytic applications. This review provides new insights to develop g-C3N4-based photocatalysts with control of composition and structure by facile molten-salt modulation in energy-conversion and environmental fields.

Dual donor-acceptor covalent organic frameworks for hydrogen peroxide photosynthesis

Constructing photocatalytically active and stable covalent organic frameworks containing both oxidative and reductive reaction centers remain a challenge. In this study, benzotrithiophene-based covalent organic frameworks with spatially separated redox centers are rationally designed for the photocatalytic production of hydrogen peroxide from water and oxygen without sacrificial agents. The triazine-containing framework demonstrates high selectivity for H2O2 photogeneration, with a yield rate of 2111 μM h-1 (21.11 μmol h-1 and 1407 μmol g-1 h-1) and a solar-to-chemical conversion efficiency of 0.296%. Codirectional charge transfer and large energetic differences between linkages and linkers are verified in the double donor-acceptor structures of periodic frameworks. The active sites are mainly concentrated on the electron-acceptor fragments near the imine bond, which regulate the electron distribution of adjacent carbon atoms to optimally reduce the Gibbs free energy of O2* and OOH* intermediates during the formation of H2O2.

Photo-assisted Zn-air battery-driven self-powered aptasensor based on the 2D/2D Schottky heterojunction of cadmium-doped molybdenum disulfide and Ti3C2Tx nanosheets for the sensitive detection of penicillin G

A novel photocatalyzed Zn-air battery-driven (ZAB)-based aptasensor has been manufactured using the two dimensional (2D)/2D Schottky heterojunction as photocathode and Zn plate as photoanode. It was then employed to sensitively and selectively detect penicillin G (PG) in the complex environment. The 2D/2D Schottky heterojunction was established by the in situ growth of cadmium-doped molybdenum disulfide nanosheets (Cd-MoS₂ NSs) around Ti₃C₂T_x NSs (denoted as Cd-MoS₂@Ti₃C₂T_x) by using phosphomolybdic acid (PMo₁₂) as precursor, thioacetamide as sulfur source, and Cd(NO₃)₂ as a doping agent through the hydrothermal method. The gained Cd-MoS₂@Ti₃C₂T_x heterojunction possessed contact interface, hierarchical structure, and plenty of sulfur and oxygen vacancies, thus showing the enhanced separation ability of photocarriers and electron transfer. Due to the enhanced UV-vis light adsorption ability, high photoelectric conversion efficiency, and exposed catalytic active sites, the constructed photocatalyzed ZAB displayed a boosted output voltage of 1.43 V under UV-vis light irradiation. The developed ZAB-driven self-powered aptasensor demonstrated an ultralow detection limit of 0.06 fg mL^-1 within a PG concentration ranged from 1.0 fg mL^-1 to 0.1 ng mL^-1, as deduced from the power density-current curves, along with high specificity, good stability and promising reproducibility, as well as excellent regeneration ability and wide applicability. The present work provided an alternative analysis method for the sensitive analysis of antibiotics based on the portable photocatalyzed ZAB-driven self-powered aptasensor.

Construction of π-conjugated crystalline carbon dots with carbon nitride nanofragments for efficient photocatalytic H2 evolution

Crystalline carbon dots (CCDs) embedded in carbon nitride (CN) nanofragments (CCDs-CN) have been developed through facile molten salt treatment. Molten salt treatment not only reconstructs CN layered sheets to form nanofragments, but also promotes the crystallization of CDs-CN. The π-conjugated electric field between CCDs and CN accelerates charge carrier separation for efficient photocatalytic H2 evolution.

Ultrahigh Performance H2 O2 Generation by Single-Atom Fe Catalysts with N/O Bidentate Ligand via Oxalic Acid and Oxygen Molecules Activation

Single-atom catalysts (SACs) for photocatalytic hydrogen peroxide (H2 O2 ) generation are researched but it is still challenging to obtain high H2 O2 yields. Herein, graphite carbon nitride (FeSA /CN) confined single Fe atoms with N/O coordination is prepared, and FeSA /CN shows high H2 O2 production via oxalic acid and O2 activation. Under visible light illumination, the concentration of H2 O2 generated by FeSA /CN can achieve 40.19 mM g-1 h-1 , which is 10.44 times higher than that of g-C3 N4 . The enhanced H2 O2 generation can be attributed to the formation of metal-organic complexes and rapid electron transfer. Moreover, the O2 activation of photocatalysts is revealed by 3,3',5,5'-tetramethylbenzidine oxidation. The results display that the O2 activation capacity of FeSA /CN is higher than that of g-C3 N4 , which facilitates the formation of H2 O2 . Finally, density functional theory calculation demonstrates that O2 is chemically adsorbed on Fe atomic sites. The adsorption energy of O2 is enhanced from -0.555 to -1.497 eV, and the bond length of OO is extended from 1.235 to 1.292 Å. These results exhibit that the confinement of single Fe atoms can promote O2 adsorption and activation. Finally, the photocatalytic mechanism is elaborated, which provides a deep understanding for SACs-catalyzed H2 O2 generation.

Ordered porous nitrogen-vacancy carbon nitride for efficient visible-light hydrogen evolution

Photocatalytic H₂ evolution is a promising technology which could be instrumental in producing clean hydrogen energy. In regard to the photocatalyst, its band structure, morphology and light utilization have a significant influence on the H₂ evolution rate and stability. Herein, a three-dimensional ordered macroporous nitrogen-vacancy carbon nitride (3DOM V-CN) photocatalyst was developed by combining vacancies with 3DOM structure for visible-light photocatalytic H₂ evolution. This strategy preserved the structural properties of 3DOM to improve the light utilization and the specific surface area of the photocatalysts. Moreover, constructing suitable vacancies could trap electrons to facilitate the separation of photogenerated carriers, and extend the light absorption region of the photocatalysts by adjusting band structure, thus improving photocatalytic activity. Compared with CN (0.3 mmol h^-1 g^-1), 3DOM V-CN demonstrated a superior photocatalytic H₂ evolution rate of 2.3 mmol h^-1 g^-1 (λ ≥ 420 nm) while possessing excellent stability. This work provides an effective and low-cost strategy for the design of the photocatalysts with high activity and stability by simultaneously tuning the band structure and morphology.

Multi-heteroatom-doping promotes molecular oxygen activation on polymeric carbon nitride for simultaneous generation of H2O2 and degradation of oxcarbazepine

Simultaneously realizing the efficient generation of H₂O₂ and degradation of pollutants is of great significance for environmental remediation. However, most polymeric semiconductors only show moderate performance in molecular oxygen (O₂) activation due to the sluggish electron-hole pair dissociation and charge transfer dynamics. Herein, we develop a simple thermal shrinkage strategy to construct multi-heteroatom-doped polymeric carbon nitride (K, P, O-CN_x). The resultant K, P, O-CN_x not only improves the separation efficiency of charge carriers, but also improves the adsorption/activation capacity of O₂. K, P, O-CN_x significantly increases the production of H₂O₂ and the degradation activity of oxcarbazepine (OXC) under visible light. K, P, O-CN₅ shows a high H₂O₂ production rate (1858 μM h^-1 g^-1) in water under visible light, far surpassing that of pure PCN. The apparent rate constant for OXC degradation by K, P, O-CN₅ increases to 0.0491 min^-1, which is 8.47 times that of PCN. Density functional theory (DFT) calculations show that the adsorption energy of O₂ near phosphorus atoms in K, P, O-CN_x is the highest. This work provides a new idea for the efficient degradation of pollutants and generation of H₂O₂ at the same time.

Sulfone-Modified Covalent Organic Frameworks Enabling Efficient Photocatalytic Hydrogen Peroxide Generation via One-Step Two-Electron O2 Reduction

Photocatalytic oxygen reduction reaction (ORR) offers a promising hydrogen peroxide (H2 O2 ) synthetic strategy, especially the one-step two-electron (2e- ) ORR route holds great potential in achieving highly efficient and selectivity. However, efficient one-step 2e- ORR is rarely harvested and the underlying mechanism for regulating the ORR pathways remains greatly obscure. Here, by loading sulfone units into covalent organic frameworks (FS-COFs), we present an efficient photocatalyst for H2 O2 generation via one-step 2e- ORR from pure water and air. Under visible light irradiation, FS-COFs exert a superb H2 O2 yield of 3904.2 μmol h-1  g-1 , outperforming most reported metal-free catalysts under similar conditions. Experimental and theoretical investigation reveals that the sulfone units accelerate the separation of photoinduced electron-hole (e- -h+ ) pairs, enhance the protonation of COFs, and promote O2 adsorption in the Yeager-type, which jointly alters the reaction process from two-step 2e- ORR to the one-step one, thereby achieving efficient H2 O2 generation with high selectivity.

Z-scheme cobalt-iron oxide/perylene diimide supermolecule heterojunction for high-efficiency ciprofloxacin removal in a photocatalysis-self-Fenton system

Fenton technology has been famous on antibiotics removal, but seriously restricted by the extra addition of H₂O₂ and low mineralization efficiency. Herein, we develop a novel cobalt-iron oxide/perylene diimide organic supermolecule (CoFeO/PDIsm) Z-scheme heterojunction under photocatalysis-self-Fenton system, in which the holes (h⁺) of photocatalyst can mineralize organic pollutants and the photo-generated electrons (e^-) are used to in-situ H₂O₂ production with high efficiency. The CoFeO/PDIsm exhibits superior in-situ H₂O₂ production at a rate of 281.7 µmol g^-1 h^-1 in contaminating solution, correspondingly of total organic carbon (TOC) removal rate of ciprofloxacin (CIP) is 63.7 %, far exceeding current photocatalysts. The high H₂O₂ production rate and remarkable mineralization ability are ascribed to great charge separation in Z-scheme heterojunction. This work provides a novel Z-scheme heterojunction with photocatalysis-self-Fenton system for environmental-friendly removing the organic containment.

Simultaneously Achieving Fast Intramolecular Charge Transfer and Mass Transport in Holey D-π-A Organic Conjugated Polymers for Highly Efficient Photocatalytic Pollutant Degradation

Simultaneously realizing efficient intramolecular charge transfer and mass transport in metal-free polymer photocatalysts is critical but challenging for environmental remediation. Herein, we develop a simple strategy to construct holey polymeric carbon nitride (PCN)-based donor-π-acceptor organic conjugated polymers via copolymerizing urea with 5-bromo-2-thiophenecarboxaldehyde (PCN-5B2T D-π-A OCPs). The resultant PCN-5B2T D-π-A OCPs extended the π-conjugate structure and introduced abundant micro-, meso-, and macro-pores, which greatly promoted intramolecular charge transfer, light absorption, and mass transport and thus significantly enhanced the photocatalytic performance in pollutant degradation. The apparent rate constant of the optimized PCN-5B2T D-π-A OCP for 2-mercaptobenzothiazole (2-MBT) removal is ∼10 times higher than that of the pure PCN. Density functional theory calculations reveal that the photogenerated electrons in PCN-5B2T D-π-A OCPs are much easier to transfer from the donor tertiary amine group to the benzene π-bridge and then to the acceptor imine group, while 2-MBT is more easily adsorbed on π-bridge and reacts with the photogenerated holes. A Fukui function calculation on the intermediates of 2-MBT predicted the real-time changing of actual reaction sites during the entire degradation process. Additionally, computational fluid dynamics further verified the rapid mass transport in holey PCN-5B2T D-π-A OCPs. These results demonstrate a novel concept toward highly efficient photocatalysis for environmental remediation by improving both intramolecular charge transfer and mass transport.

Dual sulfur defect engineering of Z-scheme heterojunction on Ag-CdS1-x@ZnIn2S4-x hollow core-shell for ultra-efficient selective photocatalytic H2O2 production

Photocatalytic production of hydrogen peroxide (H₂O₂) using sunlight as an energy source, water and molecular oxygen as feedstock is considered as a green and sustainable promising strategy to solve the energy and environmental crisis. Despite significant improvements in photocatalyst design tuning, however, the relatively low photocatalytic H₂O₂ productivity is still far from satisfactory. Herein, we developed a multi-metal composite sulfide (Ag-CdS_1-x@ZnIn₂S_4-x) with double S vacancies and hollow core-shell Z-type heterojunction structure for H₂O₂ generation by a simple hydrothermal method. The unique hollow structure improves the utilization of light source. The existence of Z-type heterojunction promotes the spatial separation of carriers, and the core-shell structure increases the interface area and active sites. Under visible light irradiation, Ag-CdS_1-x@ZnIn₂S_4-x had a high hydrogen peroxide yield of 1183.7 μmol h^-1 g^-1, which was 6 times that of CdS. The electron transfer number (n = 1.53) obtained from the Koutecky-Levuch plot and DFT calculation confirm that the presence of dual disulfide vacancies provides good selectivity of 2e^- O₂ reduction to H₂O₂. This work provides new insights into the regulation of highly selective two-electron photocatalytic H₂O₂ production, and also provides new ideas for the design and development of highly active energy conversion photocatalysts.

Coral-like B-doped g-C3N4 with enhanced molecular dipole to boost photocatalysis-self-Fenton removal of persistent organic pollutants

Fenton process is a popular advanced oxidation process for water purification. However, it requires an external addition of H₂O₂, thus raising safety threats and economic costs and encountering the problems of slow cycling of Fe²⁺/Fe³⁺ and low mineralization efficiency. Herein, we developed a novel photocatalysis-self-Fenton system based on coral-like B-doped g-C₃N₄ (Coral-B-CN) photocatalyst for 4-chlorophenol (4-CP) removal where H₂O₂ can be in situ generated by photocatalysis over Coral-B-CN, the cycling of Fe²⁺/Fe³⁺ was accelerated by photoelectrons, and the photoholes promoted 4-CP mineralization. Coral-B-CN was innovatively synthesized by hydrogen bond self-assembly followed by calcination. B heteroatom doping produced enhanced molecular dipole, while the morphological engineering exposed more active sites and optimized band structure. The effective combination of the two enhances charge separation and mass transfer between the phases, resulting in efficient in-situ H₂O₂ production, faster Fe²⁺/Fe³⁺ valence cycling and enhanced hole oxidation. Accordingly, nearly all 4-CP can be degraded during 50 min under the combined action of more ·OH and holes with stronger oxidation capacity. The mineralization rate of this system reached 70.3%, which is 2.6 and 4.9 times higher than that of Fenton process and photocatalysis, respectively. Besides, this system maintained excellent stability and can be applied in a broad range of pHs. The study would provide important insights into developing improved Fenton process with high performance for the removal of persistent organic pollutants.

Central nitrogen vacancies in polymeric carbon nitride for boosted photocatalytic H2O2 production

Polymeric carbon nitride (PCN) with vacancies usually exhibits distinguished mass transfer efficiency, outstanding carrier kinetics and excellent photoactivity. Previous studies have revealed the effect of edge vacancies in heptazine units of PCN; however, the roles of central nitrogen vacancies are scarcely investigated. Herein, central nitrogen vacancies polymeric carbon nitride (PCN-NV_C) is rationally prepared for photocatalytic H₂O₂ production with a rate of 25.1 umol/h (λ > 420 nm), which is 3.5 times than that of pristine PCN. Photoelectronic measurements reveal that the central nitrogen vacancies optimize the kinetic process of electron-hole pairs. Density functional theory (DFT) calculations disclose that PCN-NV_C displays lower O₂ adsorption energy, thereby accelerating the OOH* formation and decreasing the H₂O₂ generation energy barrier. This work not only provides a strategy for constructing central nitrogen vacancies polymeric carbon nitrogen, but also affords a deep understanding of its roles in photocatalytic H₂O₂ production.

Donor-acceptor engineered g-C3N4 enabling peroxymonosulfate photocatalytic conversion to 1O2 with nearly 100% selectivity

Singlet oxygen (¹O₂) is a thrilling active species for selectively oxidating organic substances. However, the efficient and selective generation of ¹O₂ maintains a great challenge. Here, we develop a donor-acceptor structured g-C₃N₄ by covalently engineering benzenetricarboxaldehyde (BTA) onto the fringe of g-C₃N₄. The g-C₃N₄-BTA exerts high-efficiency ¹O₂ generation with nearly 100% selectivity via peroxymonosulfate (PMS) photocatalytic activation upon visible light illumination, exhibiting obviously boosted efficiency for selective elimination of atrazine (ATZ). The consequences of experiments and theoretical calculations demonstrate that BTA units serve as electron-withdrawing sites to trap photogenerated electrons and facilitate the adsorption of PMS on the electron-deficient heptazine rings of g-C₃N₄. As such, PMS can be in-situ oxidated by the photogenerated holes to selectively produce ¹O₂. Besides, the g-C₃N₄-BTA/PMS system delivers high stability and strong resistance to the coexisting organic ions and natural organic matter, demonstrating great potential for selectively removing targeted organic contaminants with high efficiency.

Photocatalysis-self-Fenton system over edge covalently modified g-C3N4 with high mineralization of persistent organic pollutants

The Fenton process is a widely used to remedy organic wastewaters, but it has problems of adding H₂O₂, low utilization efficiency of H₂O₂ and low mineralization efficiency. Here, a new photocatalysis-self-Fenton process was exploited for the removal of persistent 4-chlorophenol (4-CP) pollutant through coupling the photocatalysis of 4-carboxyphenylboronic acid edge covalently modified g-C₃N₄ (CPBA-CN) with Fenton. In this process, H₂O₂ was in situ generated via photocatalysis over CPBA-CN, the photogenerated electrons assisted the accelerated regeneration of Fe²⁺ to improve the utilization efficiency of H₂O₂, and the photogenerated holes facilitated the enhancement of 4-CP mineralization. Under the conjugation of CPBA, the electronic structure of CN was optimized and the molecular dipole was enhanced, resulting in the deepening valence band position, accelerated electron-hole pair separation, and improved O₂ adsorption-activation. Therefore, the incremental 4-CP degradation rate in the CPBA-CN photocatalysis-self-Fenton process was approaching 0.099 min^-1, by a factor of 3.1 times compared with photocatalysis. The parallel mineralization efficiency increased to 74.6% that was 2.1 and 2.6 times than photocatalysis and Fenton, respectively. In addition, this system maintained an excellent stability in the recycle experiment and can be potentially applied in a wide range of pHs and under the coexistence of various ions. This study would provide new insights for improving Fenton process and promote further development of Fenton in organic wastewater purification.

A general way to realize the bi-directional promotion effects on the photocatalytic removal of heavy metals and organic pollutants in real water by a novel S-scheme heterojunction: Experimental investigations, QSAR and DFT calculations

Heavy metals (HMs) often coexist with organic pollutants (OPs) in real surface water. Is it possible to find a general way that the removal of one from these two pollutants will promote the elimination of another pollutant? Herein, the bi-directional promotion effects (BPEs) on synchronous removal of Cr(VI) (i.e., hexavalent chromium) and OPs were achieved by a SnNb₂O₆/CuInS₂ S-scheme heterojunction. Specifically, the apparent rate constants are 0.161 min^-1 [(Cr(VI)] and 0.019 min^-1 [Tetracycline hydrochloride (TCH)] in coexisting Cr(VI)/TCH system (which are 3.74 and 1.58 times, respectively, compared to the mono-pollutant system), indicating OPs indeed can act as hole scavengers (electron donors) to consume plenty of photoinduced holes and enable more photoexcited electrons to attend to Cr(VI) photoreduction. More significantly, OPs (i.e., TCH, atrazine and 4-chlorophenol) with different molecular structures possess different adiabatic ionization potentials (AIPs), in an inversely linear relationship with BPEs, i.e., the lower AIP value is, the higher electron-donating ability is, the better BPEs present. Finally, TCH and its degradation intermediates toxicity was forecasted via quantitative structure-activity relationship, demonstrating the toxicity decrease of TCH during the photocatalytic process. This work provides a general strategy for simultaneous removal of contaminants, contributing to wastewater purification.

Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Assembling different 2D nanomaterials into heterostructures with strong interfacial interactions presents a promising approach for novel artificial photocatalytic materials. Chemically implementing the 2D nanomaterials' construction/stacking modes to regulate different interfaces can extend their functionalities and achieve good performance. Herein, based on different fundamental principles and photochemical processes, multiple construction modes (e.g., face-to-face, edge-to-face, interface-to-face, edge-to-edge) are overviewed systematically with emphasis on the relationships between their interfacial characteristics (e.g., point, linear, planar), synthetic strategies (e.g., in situ growth, ex situ assembly), and enhanced applications to achieve precise regulation. Meanwhile, recent efforts for enhancing photocatalytic performances of 2D/2D heterostructures are summarized from the critical factors of enhancing visible light absorption, accelerating charge transfer/separation, and introducing novel active sites. Notably, the crucial roles of surface defects, cocatalysts, and surface modification for photocatalytic performance optimization of 2D/2D heterostructures are also discussed based on the synergistic effect of optimization engineering and heterogeneous interfaces. Finally, perspectives and challenges are proposed to emphasize future opportunities for expanding 2D/2D heterostructures for photocatalysis.

Potassium-Derived Charge Channels in Boron-Doped g-C3N4 Nanosheets for Photocatalytic NO Oxidation and Hydrogen Evolution

The application of graphitic carbon nitride (g-C3N4) in photocatalytic NO oxidation was limited due to severe recombination of photogenerated carriers and low concentration of oxidizing species. In this work, K and B were introduced into the interlayer and in-plane framework of g-C3N4 to address this challenge through the thermal polymerization process. The synthesized K-doped B-g-C3N4 nanosheets exhibited expanded light absorption and low charge recombination efficiency. In addition, the doping of K and B reduced the band gap of g-C3N4, which corresponded to enhanced light absorption. B was introduced into the in-plane structure by replacing C atoms, which adjusted the in-plane electron distribution. K was inserted into the interlayer by binding to the N and C atoms of adjacent layers. K-derived electron transfer channels were constructed, which increased electron delocalization and expanded the π-conjugate system. More electrons were transferred through the interlayer channels and were involved in the reaction process. The severe carrier recombination and weak transfer were improved due to the synergistic effect of K and B doping. K-doped B-g-C3N4 nanosheets exhibited enhanced generation of superoxide radicals and hydroxyl radicals, which played a key role during NO oxidation. The photocatalytic NO oxidation efficiency of codoped g-C3N4 nanosheets reached 61%, which was 2.1 and 1.2 times of that of pristine g-C3N4 and B-doped g-C3N4, respectively. The codoped g-C3N4 sample still exhibited stable photocatalytic NO oxidation efficiency after five cycles. This result provided a potential idea for improving the charge distribution and transfer of layered materials by codoping metallic and nonmetallic elements and for photocatalytic NO oxidation.

Plasma Ag-Modified α-Fe2O3/g-C3N4 Self-Assembled S-Scheme Heterojunctions with Enhanced Photothermal-Photocatalytic-Fenton Performances

Low spectral utilization and charge carrier compounding limit the application of photocatalysis in energy conversion and environmental purification, and the rational construction of heterojunction is a promising strategy to break this bottleneck. Herein, we prepared surface-engineered plasma Ag-modified α-Fe₂O₃/g-C₃N₄ S-Scheme heterojunction photothermal catalysts by electrostatic self-assembly and light deposition strategy. The local surface plasmon resonance effect induced by Ag nanoparticles broadens the spectral response region and produces significant photothermal effects. The temperature of Ag/α-Fe₂O₃/g-C₃N₄ powder is increased to 173 °C with irradiation for 90 s, ~3.2 times higher than that of the original g-C₃N₄. The formation of 2D/2D structured S-Scheme heterojunction promotes rapid electron-hole transfer and spatial separation. Ternary heterojunction construction leads to significant enhancement of photocatalytic performance of Ag/α-Fe₂O₃/g-C₃N₄, the H₂ photocatalytic generation rate up to 3125.62 µmol g^-1 h^-1, which is eight times higher than original g-C₃N₄, and the photocatalytic degradation rate of tetracycline to reach 93.6%. This thermally assisted photocatalysis strategy improves the spectral utilization of conventional photocatalytic processes and provides new ideas for the practical application of photocatalysis in energy conversion and environmental purification.