p-d Orbital Hybridization Induced by a Monodispersed Ga Site on a Pt3 Mn Nanocatalyst Boosts Ethanol Electrooxidation

Ultrastrong MXene film induced by sequential bridging with liquid metal

Assembling titanium carbide (Ti3C2Tx) MXene nanosheets into macroscopic films presents challenges, including voids, low orientation degree, and weak interfacial interactions, which reduce mechanical performance. We demonstrate an ultrastrong macroscopic MXene film using liquid metal (LM) and bacterial cellulose (BC) to sequentially bridge MXene nanosheets (an LBM film), achieving a tensile strength of 908.4 megapascals. A layer-by-layer approach using repeated cycles of blade coating improves the orientation degree to 0.935 in the LBM film, while a LM with good deformability reduces voids into porosity of 5.4%. The interfacial interactions are enhanced by the hydrogen bonding from BC and the coordination bonding with LM, which improves the stress-transfer efficiency. Sequential bridging provides an avenue for assembling other two-dimensional nanosheets into high-performance materials.

Facet-dependent synthesis of H2O2 from H2 and O2 over single Pt atom-modified Pd nanocrystal catalysts

Hydrogen peroxide (H2O2) is one of the most valuable clean energy sources with a rapidly growing requirement in industry and daily life. The direct synthesis of H2O2 from hydrogen and oxygen is considered to be an economical and environmentally friendly manufacturing route to replace the traditional anthraquinone method, although it remains a formidable challenge owing to low H2O2 selectivity and production. Here, we report a catalyst consisting of Pd(111) nanocrystals on TiO2 modified with single Pt atoms (Pt1Pd(111)/TiO2), which displays outstanding reactivity, producing 1921.3 μmol of H2O2, a H2 conversion of 62.2% and H2O2 selectivity of 80.3% over 30 min. Kinetic and isotope experiments confirm that the extraordinary catalytic properties are due to stronger H2 activation (the rate-determining step). DFT calculations confirm that Pt1Pd(111) exhibits lower energy barriers for H2 dissociation and two-step O2 hydrogenation, but higher energy barriers for side reactions than Pt1Pd(100), demonstrating clear facet dependence and resulting in greater selectivity and amount of H2O2 produced.

Reduction of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)Furan at High Current Density using a Ga-Doped AgCu:Cationomer Hybrid Electrocatalyst

Hydrogenation of biomass-derived chemicals is of interest for the production of biofuels and valorized chemicals. Thermochemical processes for biomass reduction typically employ hydrogen as the reductant at elevated temperatures and pressures. Here, the authors investigate the direct electrified reduction of 5-hydroxymethylfurfural (HMF) to a precursor to bio-polymers, 2,5-bis(hydroxymethyl)furan (BHMF). Noting a limited current density in prior reports of this transformation, a hybrid catalyst consisting of ternary metal nanodendrites mixed with a cationic ionomer, the latter purposed to increase local pH and facilitate surface proton diffusion, is investigated. This approach, when implemented using Ga-doped Ag-Cu electrocatalysts designed for p-d orbital hybridization, steered selectivity to BHMF, achieving a faradaic efficiency (FE) of 58% at 100 mA cm-2 and a production rate of 1 mmol cm-2 h-1, the latter a doubling in rate compared to the best prior reports.

Efficient Proton-exchange Membrane Fuel Cell Performance of Atomic Fe Sites via p-d Hybridization with Al Dopants

Orbital hybridization to regulate the electronic structures and surface chemisorption properties of transition metals is of great importance for boosting the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs). Herein, we developed a core-shell rambutan-like nanocarbon catalyst (FeAl-RNC) with atomically dispersed Fe-Al atom pairs from metal-organic framework (MOF) material. Experimental and theoretical results demonstrate that the strong p-d orbital hybridization between Al and Fe results in an asymmetric electron distribution with moderate adsorption strength of oxygen intermediates, rendering enhanced intrinsic ORR activity. Additionally, the core-shell rambutan-like structure of FeAl-RNC with abundant micropores and macropores can enhance the density of active sites, stability, and transport pathways in PEMFC. The FeAl-RNC-based PEMFC achieves excellent activity (68.4 mA cm-2 at 0.9 V), high peak power (1.05 W cm-2), and good stability with only 7% current loss after 100 h at 0.7 V under H2-O2 condition.

Atomic Diffusion Engineered PtSnCu Nanoframes with High-Index Facets Boost Ethanol Oxidation

Electrochemical ethanol oxidation is crucial to directly convert a biorenewable liquid fuel with high energy density into electrical energy, but it remains an inefficient reaction even with the best catalysts. To boost ethanol oxidation, developing multimetallic nanoalloy has emerged as one of the most effective strategies, yet faces a challenge in the rational engineering of multimetallic active-site ensembles at atomic-level. Herein, starting from typical PtCu nanocrystals, an atomic Sn diffusion strategy is developed to construct well-defined Pt47Sn12Cu41 octopod nanoframes, which is enclosed by high-index facets of n (111)-(111), such as {331} and {221}. Pt47Sn12Cu41 achieves a high mass activity of 3.10 A mg-1 Pt and promotes the C-C bond breaking and oxidation of poisonous CO intermediate, representing a state-of-the-art electrocatalyst toward ethanol oxidation in acidic electrolyte. Density functional theory （DFT） calculations have confirmed that the introduction of Sn improves the electroactivity by uplifting the d-band center through the s-p-d coupling. Meanwhile, the strong binding of ethanol and the reduced energy barrier of CO oxidation guarantee a highly efficient ethanol oxidation process with improved Faradic efficiency of C1 products. This work offers a promising strategy for constructing novel multimetallic nanoalloys tailored by atomic metal sites as the efficient electrocatalysts.

Cascaded p-d Orbital Hybridization Interaction in Ultrathin High-Entropy Alloy Nanowires Boosts Complete Non-CO Pathway of Methanol Oxidation Reaction

Designing high efficiency platinum (Pt)-based catalysts for methanol oxidation reaction (MOR) with high "non-CO" pathway selectivity is strongly desired and remains a grand challenge. Herein, PtRuNiCoFeGaPbW HEA ultrathin nanowires (HEA-8 UNWs) are synthesized, featuring unique cascaded p-d orbital hybridization interaction by inducing dual p-block metals (Ga and Pb). In comparison with Pt/C, HEA-8 UNWs exhibit 15.0- and 4.2-times promotion of specific and mass activity for MOR. More importantly, electrochemical in situ FITR spectroscopy reveals that the production/adsorption of CO (CO*) intermediate is effectively avoided on HEA-8 UNWs, leading to the complete "non-CO" pathway for MOR. Theoretical calculations demonstrate the optimized electronic structure of HEA-8 UNWs can facilitates a lower energy barrier for the "non-CO" pathway in the MOR.

Atomic Engineering of Single-Atom Nanozymes for Biomedical Applications

Single-atom nanozymes (SAzymes) showcase not only uniformly dispersed active sites but also meticulously engineered coordination structures. These intricate architectures bestow upon them an exceptional catalytic prowess, thereby captivating numerous minds and heralding a new era of possibilities in the biomedical landscape. Tuning the microstructure of SAzymes on the atomic scale is a key factor in designing targeted SAzymes with desirable functions. This review first discusses and summarizes three strategies for designing SAzymes and their impact on reactivity in biocatalysis. The effects of choices of carrier, different synthesis methods, coordination modulation of first/second shell, and the type and number of metal active centers on the enzyme-like catalytic activity are unraveled. Next, a first attempt is made to summarize the biological applications of SAzymes in tumor therapy, biosensing, antimicrobial, anti-inflammatory, and other biological applications from different mechanisms. Finally, how SAzymes are designed and regulated for further realization of diverse biological applications is reviewed and prospected. It is envisaged that the comprehensive review presented within this exegesis will furnish novel perspectives and profound revelations regarding the biomedical applications of SAzymes.

Synthesis of Monodispersed Pd Nanoparticles and Ultrathin Twisty Pd Nanowire Networks for Electrooxidation of Ethanol

In recent years, preparing precious metal catalysts with a controllable morphology has become a hot research topic for researchers. In this study, monodispersed palladium (Pd) nanoparticles (NP) and ultrathin Pd twisty nanowire networks (TNN) were synthesized in a solvothermal system using N,N-dimethylformamide (DMF) and oleylamine (OAm) as solvents, Transmission electron microscopy (TEM) images reveal the successful synthesis of nanoparticles and ultrathin TNN microstructures. Electrochemical data show that the current densities of Pd-NP and Pd-TNN for the ethanol oxidation reaction (EOR) reach 1878 mA mg-1 and 1765 mA mg-1, respectively. Compared to commercial Pd/C, Pd-TNN and Pd-NP exhibit better catalytic stability, lower electron transfer barriers, and more resistance to catalyst poisoning. Temperature, pH value, and ethanol concentration are all favorable for the EOR. According to the experimental data, the mechanism of enhanced electrocatalytic activity of Pd-NP and Pd-TNN catalysts for ethanol oxidation is discussed. This paper presents a method for preparing catalysts with stabilized structures to develop Pd-based catalysts for electrocatalytic oxidation reactions.

Ruthenium single-atom doping-driven modulation of Co3O4 spinel tetrahedral site 3d-orbital occupancy in lithium-oxygen batteries

Metal single-atom catalysts have attracted widespread attention in the field of lithium-oxygen batteries due to their unique active sites, high catalytic selectivity, and near total atomic utilization efficiency. Isolated metal atoms not only serve as the active sites themselves, but also function as modulators, reversely regulating the surface electronic structure of the support to enhance its inherent electrocatalytic activities. Despite the potential of isolated metal atom-driven active sites, understanding the structure-activity relationship remains a challenge. In this study, we present a ruthenium single-atom doping-driven cost-effective and durable tricobalt tetroxide electrocatalyst with excellent oxygen electrode electrocatalytic activity. The lithium-oxygen battery with this catalyst as the oxygen electrode demonstrates high performance, achieving a capacity of up to 25 000 mA h g-1 and maintaining good stability over 400 cycles at a current density of 100 mA g-1. This improvement is attributed to the exquisite control of the morphology and structure of the discharge product, lithium peroxide. The aresults of physical characterization and theoretical calculations reveal that isolated ruthenium atoms bond with the tetrahedral cobalt site, resulting in spin polarization enhancement and rearrangement of d orbital energy levels in cobalt. This rearrangement reduces the dz2 orbital occupancy and promotes their transfer to the octahedral cobalt site, thereby enhancing its adsorption capacity for the oxygen-containing intermediates, and ultimately increasing the electrocatalytic activity of the oxygen evolution reaction. This work presents an innovative strategy to regulate the catalytic activity of metal oxides by introducing another metal single atom.

Ultrafast synthesis of efficient TS-PtCoCu/CNTs composite with high feed-to-product conversion rate by Joule heating for electrocatalytic oxidation of ethanol

Due to the challenges involved in achieving high metal load, uniform metal dispersion and nanosized metal particles simultaneously, it is difficult to develop a simple protocol for the rapid and efficient synthesis of Pt-based composites for electrocatalytic ethanol oxidation reaction (EOR). In this study, a facile ultrafast thermal shock strategy via Joule heating was applied to fabricate a series of PtCoCu ternary nanoalloys decorated carbon nanotube composites (TS-PtCoCu/CNTs), without the need for a reducing agent or surfactant. The TS-PtCoCu/CNTs with optimal Pt content (∼15 %) exhibited excellent EOR activity, with mass and specific activity of 3.58 A mgPt-1 and 5.79 mA cm-2, respectively, which are 3.8 and 13.5 times higher than those of Pt/C. Compared with the control prepared through the traditional furnace annealing, the catalyst also showed excellent activity and stability. DFT calculations revealed that the TS-PtCoCu/CNTs possesses a downshifted d-band center, weakened CO adsorption and higher OH affinity compared with monometallic Pt, all of which lead to the preferred C1 pathway for EOR. This study demonstrates an ultrafast construction of a highly efficient Pt-Co-Cu ternary catalyst for EOR. Additionally, it provides insights into the reaction mechanism based on structural characterization, electrochemical characterization, and theoretical calculations.

High-entropy PtCuSnWNb nanoalloys as efficient and stable catalysts for ethanol oxidation electrocatalysis

Ternary nanoalloys used as electrochemical ethanol oxidation catalysts for direct ethanol fuel cells are confronted with poor stability issues under harsh acidic operating conditions. To address this issue, a carbon-supported quinary PtCuSnWNb high-entropy nanoalloy (denoted as PtCuSnWNb/C) was synthesized by using a polyol reduction method. Due to the unique high-entropy mixing states and strong catalyst-support interactions, PtCuSnWNb/C shows robust structural and compositional stability.

Single-Atom Alloys Materials for CO2 and CH4 Catalytic Conversion

The catalytic conversion of greenhouse gases CH4 and CO2 constitutes an effective approach for alleviating the greenhouse effect and generating valuable chemical products. However, the intricate molecular characteristics characterized by high symmetry and bond energies, coupled with the complexity of associated reactions, pose challenges for conventional catalysts to attain high activity, product selectivity, and enduring stability. Single-atom alloys (SAAs) materials, distinguished by their tunable composition and unique electronic structures, confer versatile physicochemical properties and modulable functionalities. In recent years, SAAs materials demonstrate pronounced advantages and expansive prospects in catalytic conversion of CH4 and CO2. This review begins by introducing the challenges entailed in catalytic conversion of CH4 and CO2 and the advantages offered by SAAs. Subsequently, the intricacies of synthesis strategies employed for SAAs are presented and characterization techniques and methodologies are introduced. The subsequent section furnishes a meticulous and inclusive overview of research endeavors concerning SAAs in CO2 catalytic conversion, CH4 conversion, and synergy CH4 and CO2 conversion. The particular emphasis is directed toward scrutinizing the intricate mechanisms underlying the influence of SAAs on reaction activity and product selectivity. Finally, insights are presented on the development and future challenges of SAAs in CH4 and CO2 conversion reactions.

Optimizing Intermediate Adsorption on Pt Sites via Triple-Phase Interface Electronic Exchange for Methanol Oxidation

For the most commonly applied platinum-based catalysts of direct methanol fuel cells, the adsorption ability toward reaction intermediates, including CO and OH, plays a vital role in their catalytic activity and antipoisoning in anodic methanol oxidation reaction (MOR). Herein, guided by a theoretical mechanism study, a favorable modulation of the electronic structure and intermediate adsorption energetics for Pt active sites is achieved by constructing the triple-phase interfacial structure between tin oxide (SnO2), platinum (Pt), and nitrogen-doped graphene (NG). From the strong electronic exchange at the triple-phase interface, the adsorption ability toward MOR reaction intermediates on Pt sites could be efficiently optimized, which not only inhibits the adsorption of CO* on active sites but also facilitates the adsorption of OH* to strip the poisoning species from the catalyst surface. Accordingly, the resulting catalyst delivers excellent catalytic activity and antipoisoning ability for MOR catalysis. The mass activity reaches 1098 mA mg-1Pt, 3.23 times of commercial Pt/C. Meanwhile, the initial potentials and main peak for CO oxidation are also located at a much lower potential (0.51 and 0.74 V) against commercial Pt/C (0.83 and 0.89 V).

Alkali Etching of Porous PdCoZn Nanosheets for Boosting C-C Bond Cleavage of Ethylene Glycol Oxidation

Pd-based electrocatalysts are the most effective catalysts for ethylene glycol oxidation reaction (EGOR), while the disadvantages of poor stability, low resistance to neutrophilic, and low catalytic activity seriously hamper the development of direct ethylene glycol fuel cells (DEGFCs). In this work, defect-riched PdCoZn nanosheets (D-PdCoZn NSs) with ultrathin 2D NSs and porous structures are fabricated through the solvothermal and alkali etching processes. Benefiting from the presence of defects and ultrathin 2D structures, D-PdCoZn NSs demonstrate excellent electrocatalytic activity and good durability against EGOR in alkaline media. The mass activity and specific activity of D-PdCoZn NSs for EGOR are 9.5 A mg-1 and 15.7 mA cm-2 , respectively, which are higher than that of PdCoZn NSs, PdCo NSs, and Pd black. The D-PdCoZn NSs still maintain satisfactory mass activity after long-term durability tests. Meanwhile, in situ IR spectroscopy demonstrates that the presence of defects attenuated the adsorption of intermediates, which improves the selectivity of the C1 pathway with excellent anti-CO poisoning performance. This work not only provides an effective synthetic strategy for the preparation of Pd-based nanomaterials with defective structures but also indicates significant guidance for optimum C1 pathway selectivity of ethylene glycol and other challenging chemical transformations.

Alleviating the competitive adsorption of hydrogen and hydroxyl intermediates on Ru by d-p orbital hybridization for hydrogen electrooxidation

Strengthening the hydroxyl binding energy (OHBE) on Ru surfaces for efficient hydrogen oxidation reaction (HOR) in alkaline electrolytes at the expense of narrowing the effective potential window (EPW) increases the risk of passivation under transient conditions for the alkaline exchange membrane fuel cell technique. Herein, an effective Ru/NiSe2 catalyst was reported which exhibits a gradually enhanced intrinsic activity and slightly enlarged EPW with the increased degree of coupling between Ru and NiSe2. This promotion could be attributed to the optimized electron distribution and d-band structures of Ru surfaces weakening the hydrogen binding energy and especially the OHBE through the strong d-p orbital hybridization between Ru and NiSe2. Unlike the conventional way of strengthened OHBE enhancing the oxidative desorption of hydrogen intermediates (Had) via the bi-functional mechanism, the weakened OHBE on this Ru/NiSe2 model catalyst alleviates the competitive adsorption between Had and the hydroxyl intermediates (OHad), thereby accelerating the HOR kinetics at low overpotentials and hindering the full poisoning of the catalytic surfaces by strongly adsorbed OHad spectators at high overpotentials. The work reveals a missed but important approach for Ru-based catalyst development for the fuel cell technique.

Strain and Shell Thickness Engineering in Pd3 Pb@Pt Bifunctional Electrocatalyst for Ethanol Upgrading Coupled with Hydrogen Production

The ethanol oxidation reaction (EOR) is an attractive alternative to the sluggish oxygen evolution reaction in electrochemical hydrogen evolution cells. However, the development of high-performance bifunctional electrocatalysts for both EOR and hydrogen evolution reaction (HER) is a major challenge. Herein, the synthesis of Pd3 Pb@Pt core-shell nanocubes with controlled shell thickness by Pt-seeded epitaxial growth on intermetallic Pd3 Pb cores is reported. The lattice mismatch between the Pd3 Pb core and the Pt shell leads to the expansion of the Pt lattice. The synergistic effects between the tensile strain and the core-shell structures result in excellent electrocatalytic performance of Pd3 Pb@Pt catalysts for both EOR and HER. In particular, Pd3 Pb@Pt with three Pt atomic layers shows a mass activity of 8.60 A mg-1 Pd+Pt for ethanol upgrading to acetic acid and close to 100% of Faradic efficiency for HER. An EOR/HER electrolysis system is assembled using Pd3 Pb@Pt for both the anode and cathode, and it is shown that low cell voltage of 0.75 V is required to reach a current density of 10 mA cm-2 . The present work offers a promising strategy for the development of bifunctional catalysts for hybrid electrocatalytic reactions and beyond.

Electronic and Geometric Effects Endow PtRh Jagged Nanowires with Superior Ethanol Oxidation Catalysis

Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07 mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80 000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened Pt─Pt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO → *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.

Recent Advances in Hierarchical Porous Engineering of MOFs and Their Derived Materials for Catalytic and Battery: Methods and Application

Hierarchical porous materials have attracted the attention of researchers due to their enormous specific surface area, maximized active site utilization efficiency, and unique structure and properties. In this context, metal-organic frameworks (MOFs) offer a unique mix of properties that make them particularly appealing as tunable porous substrates containing highly active sites. This review focuses on recent advances in the types and synthetic strategies of hierarchical porous MOFs and their derived materials. Furthermore, it highlights the relationship between the mass diffusion and transport of hierarchical porous structures and the pore size with examples and simulations, while identifying their potential and limitations. On this basis, how the synthesis conditions affect the structure and electrochemical properties of MOFs based hierarchical porous materials with different structures is discussed, highlighting the prospects and challenges for the synthetization, as well as further scientific research and practical applications. Finally, some insights into current research and future design ideas for advanced MOFs based hierarchical porous materials are presented.

Ultrathin PdPtP nanodendrites as high-activity electrocatalysts toward alcohol oxidation

PdPtP nanodendrites were prepared by a post-phosphating method. Due to their well-designed structure and composition, the EOR activity of the PtPdP NDs is significantly increased to 14.3 A mgPd+Pt-1, which is a significant improvement compared to commercial Pd/C catalysts. In addition, stability tests demonstrated their excellent catalytic activity and structural durability.

Atomic Distance Engineering in Metal Catalysts to Regulate Catalytic Performance

It is very important to understand the structure-performance relationship of metal catalysts by adjusting the microstructure of catalysts at the atomic scale. The atomic distance has an essential influence on the composition of the environment of active metal atom, which is a key factor for the design of targeted catalysts with desired function. In this review, we discuss and summarize strategies for changing the atomic distance from three aspects and relate their effects on the reactivity of catalysts. First, the effects of regulating bond length between metal and coordination atom at one single-atom site on the catalytic performance are introduced. The bond lengths are affected by the strain effect of the support and high-shell doping and can evolve during the reaction. Next, the influence of the distance between single-atom sites on the catalytic performance is discussed. Due to the space matching of adsorption and electron transport, the catalytic performance can be adjusted with the shortening of site distance. In addition, the effect of the arrangement spacing of the surface metal active atoms on the catalytic performance of metal nanocatalysts is studied. Finally, a comprehensive summary and outlook of the relationship between atomic distance and catalytic performance is given.

In-situ synthesis of carbon-supported ultrafine trimetallic PdSnAg nanoparticles for highly efficient alcohols electrocatalysis

Designing functional and durable electrocatalysts for the oxidation of alcohols plays a significant role for the development of direct alcohol fuel cells (DAFCs). Herein, carbon-supported ultrafine PdSnAg nanoparticles with an average size of 3.27 nm (denoted as PdSnAg/C NPs) have been synthesized for alcohols electrocatalysis. The smaller particle size means a higher proportion of surface exposed atoms for catalyzing the reaction followed by high catalytic performance. The multimetallic nanoalloys have potential electronic structure adjustment and synergistic effect between different components. The incorporation of oxophilic metals Sn and Ag facilitates the removal of intermediates produced during the oxidation of alcohols. The PdSnAg/C NPs exhibit a remarkable electrocatalytic performance for ethylene glycol oxidation reaction (EGOR) with the mass activity of 12.3 A mgPd-1, which is 15.6, 2.50 and 2.60 times higher than those of commercial Pd/C (0.790 A mgPd-1), PdSn/C NPs (4.85 A mgPd-1) and PdAg/C NPs (4.69 A mgPd-1), respectively. Meanwhile, PdSnAg/C NPs show superior mass activities of 10.6 A mgPd-1 and 6.65 A mgPd-1 for ethanol oxidation reaction (EOR) and glycerol oxidation reaction (GOR), which are 14.3 and 8.30 times superior than the commercial Pd/C, respectively. The exceptional mass activity promises the PdSnAg/C NPs to be the potential Pd-based catalysts for alcohols electrocatalysis.

Co-Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9 S8 /Co3 O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co-Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co9 S8 /Co3 O4 heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co-Co DASs layer with stretching of cobalt oxygen bond and S-Co-O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm-2 , a breakthrough of 500 mA cm-2 high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co-Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm-1 ), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g-1 high mass current density using the first reported noble metal-free cobalt anode catalyst of Co-Co DASs/ZCC in PEM-WE at 2.14 V was recorded.

Metal Alloys-Structured Electrocatalysts: Metal-Metal Interactions, Coordination Microenvironments, and Structural Property-Reactivity Relationships

Metal alloys-structured electrocatalysts (MAECs) have made essential contributions to accelerating the practical applications of electrocatalytic devices in renewable energy systems. However, due to the complex atomic structures, varied electronic states, and abundant supports, precisely decoding the metal-metal interactions and structure-activity relationships of MAECs still confronts great challenges, which is critical to direct the future engineering and optimization of MAECs. Here, this timely review comprehensively summarizes the latest advances in creating the MAECs, including the metal-metal interactions, coordination microenvironments, and structure-activity relationships. First, the fundamental classification, design, characterization, and structural reconstruction of MAECs are outlined. Then, the electrocatalytic merits and modulation strategies of recent breakthroughs for noble and non-noble metal-structured MAECs are thoroughly discussed, such as solid solution alloys, intermetallic alloys, and single-atom alloys. Particularly, unique insights into the bond interactions, theoretical understanding, and operando techniques for mechanism disclosure are given. Thereafter, the current states of diverse MAECs with a unique focus on structural property-reactivity relationships, reaction pathways, and performance comparisons are discussed. Finally, the future challenges and perspectives for MAECs are systematically discussed. It is believed that this comprehensive review can offer a substantial impact on stimulating the widespread utilization of metal alloys-structured materials in electrocatalysis.

Two-dimensional mesoporous metals: a new era for designing functional electrocatalysts

Two-dimensional (2D) mesoporous metals contribute a unique class of electrocatalyst materials for electrochemical applications. The penetrated mesopores of 2D mesoporous metals expose abundant accessible undercoordinated metal sites, while their 2D nanostructures accelerate the transport of electrons and reactants. Therefore, 2D mesoporous metals have exhibited add-in structural functions with great potential in electrocatalysis that not only enhance electrocatalytic activity and stability but also optimize electrocatalytic selectivity. In this Perspective, we summarize recent progress in the design, synthesis, and electrocatalytic performance of 2D mesoporous metals. Four main strategies for synthesizing 2D mesoporous metals, named the CO (and CO container) induced route, halide ion-oriented route, interfacial growth route, and metal oxide atomic reconstruction route, are presented in detail. Moreover, electrocatalytic applications in several important reactions are summarized to highlight the add-in structural functions of 2D mesoporous metals in enhancing electrochemical activity, stability, and selectivity. Finally, current challenges and future directions are discussed in this area. This Perspective offers some important insights into both fundamental investigations and practical applications of novel high-performance functional electrocatalysts.

Sulfur-Stabilizing Ultrafine High-Entropy Alloy Nanoparticles on MXene for Highly Efficient Ethanol Electrooxidation

High-entropy alloys (HEAs) are significantly promising candidates for heterogeneous catalysis, yet the controllable synthesis of ultrafine HEA nanoparticles (NPs) remains a formidable challenge due to severe thermal sintering during the high-temperature fabrication process. Herein, we report a sulfur-stabilizing strategy to construct ultrafine HEA NPs with an average diameter of 4.02 nm supported on sulfur-modified Ti3C2Tx (S-Ti3C2Tx) MXene, on which the strong interfacial metal-sulfur interactions between HEA NPs and the S-Ti3C2Tx supports significantly increase the interfacial adhesion strength, thus greatly suppressing nanoparticle sintering by retarding both particle migration and metal atom diffusion. The representative quinary PtPdCuNiCo HEA-S-Ti3C2Tx exhibits excellent catalytic performance toward alkaline ethanol oxidation reaction (EOR) with an ultrahigh mass activity of 7.03 A mgPt+Pd-1, which is 4.34 and 5.17 times higher than those of the commercial Pt/C and Pd/C catalysts, respectively. In situ attenuated total reflection-infrared spectroscopy studies reveal that the high intrinsic catalytic activity for the EOR can be ascribed to the synergy of different catalytically active sites of HEA NPs and the well-designed interfacial metal-sulfur interactions.

Ampere-Level Nitrate Electroreduction to Ammonia over Monodispersed Bi-Doped FeS2

Electrochemical conversion of NO3- into NH3 (NO3RR) holds an enormous prospect to simultaneously yield valuable NH3 and alleviate NO3- pollution. Herein, we report monodispersed Bi-doped FeS2 (Bi-FeS2) as a highly effective NO3RR catalyst. Atomic coordination characterizations of Bi-FeS2 disclose that the isolated Bi dopant coordinates with its adjacent Fe atom to create the unconventional p-d hybridized Bi-Fe dinuclear sites. Operando spectroscopic measurements combined with theoretical calculations disclose that Bi-Fe dinuclear sites can synergistically enhance the hydrogenation energetics of NO3--to-NH3 pathway, while suppressing the competitive hydrogen evolution, leading to a high NO3RR selectivity and activity. Consequently, the specially designed flow cell equipped with Bi-FeS2 exhibits a high NH3 yield rate of 83.7 mg h-1 cm-2 with a near-100% NO3--to-NH3 Faradaic efficiency at an ampere-level current density of 1023.2 mA cm-2, together with an excellent long-term stability for 100 h of electrolysis, ranking almost the highest performance among all reported NO3RR catalysts.

Atomically Dispersed CrOX on Pd Metallene for CO-Resistant Methanol Oxidation

The effective design and construction of high-performance methanol oxidation reaction (MOR) electrocatalysts are significant for the development of direct methanol fuel cells. But the active sites of the MOR electrocatalysts are susceptible to being poisoned by CO, resulting in poor durability. Herein, we report an atomically dispersed CrOX species anchored on Pd metallene through bridging O atoms. This catalyst shows an outstanding MOR performance with 7 times higher mass activity and 100 mV lower CO electrooxidation potential than commercial Pd/C. The results of operando electrochemical Fourier transform infrared spectroscopy demonstrate the rapid removal of CO* on CrOX-Pd metallene. Theoretical calculations reveal that atomically dispersed CrOX can lower the adsorption energy of CO* on Pd sites and enhance that of OH* through the formation of a hydrogen bond, decreasing the formation energy of COOH*. This work provides a new strategy for improving MOR performance via atomically engineering oxide/metal interfaces.

Accelerating Ethanol Complete Electrooxidation via Introducing Ethylene as the Precursor for the C-C Bond Splitting

The crucial issue restricting the application of direct ethanol fuel cells (DEFCs) is the incomplete and sluggish electrooxidation of ethanol due to the chemically stable C-C bond thereof. Herein, a unique ethylene-mediated pathway with a 100 % C1-selectivity for ethanol oxidation reaction (EOR) is proposed for the first time based on a well-structured Pt/Al2 O3 @TiAl catalyst with cascade active sites. The electrochemical in situ Fourier transform infrared spectroscopy (FTIR) and differential electrochemical mass spectrometry (DEMS) analysis disclose that ethanol is primarily dehydrated on the surface of Al2 O3 @TiAl and the derived ethylene is further oxidized completely on nanostructured Pt. X-ray absorption and density functional theory (DFT) studies disclose the Al component doped in Pt nanocrystals can promote the EOR kinetics by lowering the reaction energy barriers and eliminating the poisonous species. Strikingly, Pt/Al2 O3 @TiAl exhibits a specific activity of 3.83 mA cm-2 Pt , 7.4 times higher than that of commercial Pt/C and superior long-term durability.

Oxygen-Bridged Long-Range Dual Sites Boost Ethanol Electrooxidation by Facilitating C-C Bond Cleavage

Optimizing the interatomic distance of dual sites to realize C-C bond breaking of ethanol is critical for the commercialization of direct ethanol fuel cells. Herein, the concept of holding long-range dual sites is proposed to weaken the reaction barrier of C-C cleavage during the ethanol oxidation reaction (EOR). The obtained long-range Rh-O-Pt dual sites achieve a high current density of 7.43 mA/cm2 toward EOR, which is 13.3 times that of Pt/C, as well as remarkable stability. Electrochemical in situ Fourier transform infrared spectroscopy indicates that long-range Rh-O-Pt dual sites can increase the selectivity of C1 products and suppress the generation of a CO intermediate. Theoretical calculations further disclose that redistribution of the surface-localized electron around Rh-O-Pt can promote direct oxidation of -OH, accelerating C-C bond cleavage. This work provides a promising strategy for designing oxygen-bridged long-range dual sites to tune the activity and selectivity of complicated catalytic reactions.

Surface Ligand Modification on Ultrathin Ni(OH)2 Nanosheets Enabling Enhanced Alkaline Ethanol Oxidation Kinetics

The ethanol oxidation reaction (EOR) is an economical pathway in many electrochemical systems for clean energy, such as ethanol fuel cells and the anodic reaction in hydrogen generation. Noble metals, such as platinum, are benchmark catalysts for EOR owing to their superb electrochemical capability. To improve sustainability and product selectivity, nickel (Ni)-based electrocatalysts are considered promising alternatives to noble-metal EOR. Although Ni-based electrocatalysts are relieved from intermediate poisoning, their performances are largely limited by their relatively high onset potential. Therefore, the EOR usually competes with the oxygen evolution reaction (OER) at working potentials, resulting in a low EOR efficiency. Here, we demonstrate a strategy to modify the surface ligands on ultrathin Ni(OH)2 nanosheets, which substantially improved their catalytic properties for the alkaline EOR. Chemisorbed octadecylamine ligands could create an alcoholophilic layer at the nanosheet surface to promote alcohol diffusion and adsorption, resulting in outstanding EOR activity and selectivity over the OER at higher potential. These non-noble-metal-based 2D electrocatalysts and surface ligand engineering showcase a promising strategy for achieving high-efficiency electrocatalysis of EOR in many practical electrochemical processes.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

Bimetallic Pt-Hg Aerogels for Electrocatalytic Upgrading of Ethanol to Acetate

Electrochemical upgrading of ethanol to acetic acid provides a promising strategy to couple with the current hydrogen production from water electrolysis. This work reports the design of a series of bimetallic PtHg aerogels, where the PtHg aerogel exhibits a 10.5-times higher mass activity than that of commercial Pt/C toward ethanol oxidation. More impressively, the PtHg aerogel demonstrates nearly 100% selectivity toward the production of acetic acid. The operando infrared spectroscopic studies and nuclear magnetic resonance analysis verify the preferable C2 pathway mechanism during the reaction. This work opens an avenue for the electrochemical synthesis of acetic acid via ethanol electrolysis.

Self-Optimized Ligand Effect of Single-Atom Modifier in Ternary Pt-Based Alloy for Efficient Hydrogen Oxidation

Modifying the atomic and electronic structure of platinum-based alloy to enhance its activity and anti-CO poisoning ability is a vital issue in hydrogen oxidation reaction (HOR). However, the role of foreign modifier metal and the underlying ligand effect is not fully understood. Here, we propose that the ligand effect of single-atom Cu can dynamically modulate the d-band center of Pt-based alloy for boosting HOR performance. By in situ X-ray absorption spectroscopy, our research has identified that the potential-driven structural rearrangement into high-coordination Cu-Pt/Pd intensifies the ligand effect in Pt-Cu-Pd, leading to enhanced HOR performance. Thereby, modulating the d-band structure leads to near-optimal hydrogen/hydroxyl binding energies and reduced CO adsorption energies for promoting the HOR kinetics and the CO-tolerant capability. Accordingly, PtPdCu₁/C exhibits excellent CO tolerance even at 1,000 ppm impurity.

Modulation in the d Band of Ir by Core-Shell Construction for Robust Water Splitting Electrocatalysts in Acid

The realization of commercialization of proton electrolyte membrane water splitting technology significantly depends on the anodic electrocatalyst working at a high potential and strong acidic conditions requiring superior oxygen evolution reaction activity and stability. In this work, we devise the construction of ultrasmall Pd@Ir core-shell nanoparticles (5 nm) with atomic layer Ir (3 atomic layers) on carbon nanotubes (Pd@Ir/CNT) as an exceptional bifunctional electrocatalyst in acidic water splitting. Due to the core-shell structure, strain generated at heterointerfaces leads to an upshifted d band center of Ir atoms contributing to a 62-fold better mass activity at 1.63 V vs RHE than commercial IrO₂; besides, the electronic hybridization suppresses the electrochemical dissolution of Ir; as a result, robust stability is also achieved. In hydrogen evolution reaction catalysis, Pd@Ir/CNT exhibits a 3.7 times higher mass activity than Pt/C. Furthermore, only 1.7 V is required to reach a water splitting current density of 100 mA cm^-2, 251 mV lower than that of Pt/C-IrO₂, indicating its superiority in acidic water splitting.

Hydroxyl-Binding Energy-Induced Kinetic Gap Narrowing between Acidic and Alkaline Hydrogen Oxidation Reaction on Intermetallic Ru3 Sn7 Catalyst

Developing highly efficient catalysts toward alkaline hydrogen oxidation reaction (HOR) and narrowing the kinetic gap between acidic and alkaline electrolytes are of great importance for the practical application of alkaline exchange membrane fuel cell . Herein, ordered Ru₃ Sn₇ /C intermetallic compound has been developed for the HOR under alkaline and acidic conditions. The authors demonstrate that the ordered intermetallic Ru₃ Sn₇ /C shows much enhanced HOR activity, stability, and CO-tolerance compared with its disordered RuSn solid solution alloy counterpart. More importantly, the authors find that the kinetic gap of HOR between acidic and alkaline media is significantly narrowed in the as-synthesized intermetallic Ru₃ Sn₇ /C catalysts. Combined experiment results and theoretical calculations, the authors understand that promoted hydroxyl-binding energy on Ru₃ Sn₇ /C derived from the intermetallic-induced strong electron interaction is responsible for the accelerated alkaline HOR performance and narrowed kinetic gap.

p-d Orbital Hybridization Induced by p-Block Metal-Doped Cu Promotes the Formation of C2+ Products in Ampere-Level CO2 Electroreduction

Large-current electrolysis of CO₂ to multi-carbon (C₂₊) products is critical to realize the industrial application of CO₂ conversion. However, the poor binding strength of *CO intermediates on the catalyst surface induces multiple competing pathways, which hinder the C₂₊ production. Herein, we report that p-d orbital hybridization induced by Ga-doped Cu (CuGa) could promote efficient CO₂ electrocatalysis to C₂₊ products at ampere-level current density. It was found that CuGa exhibited the highest C₂₊ productivity with a remarkable Faradaic efficiency (FE) of 81.5% at a current density of 0.9 A/cm², and the potential at such a high current density was -1.07 V versus reversible hydrogen electrode. At 1.1 A/cm², the catalyst still maintained a high C₂₊ productivity with an FE of 76.9%. Experimental and theoretical studies indicated that the excellent performance of CuGa results from the p-d hybridization of Cu and Ga, which not only enriches reactive sites but also enhances the binding strength of the *CO intermediate and facilitates C-C coupling. The p-d hybridization strategy can be extended to other p-block metal-doped Cu catalysts, such as CuAl and CuGe, to boost CO₂ electroreduction for C₂₊ production. As far as we know, this is the first work to promote electrochemical CO₂ reduction reaction to generate the C₂₊ product by p-d orbital hybridization interaction using a p-block metal-doped Cu catalyst.

The Role of Bismuth in Suppressing the CO Poisoning in Alkaline Methanol Electrooxidation: Switching the Reaction from the CO to Formate Pathway

While tuning the electronic structure of Pt can thermodynamically alleviate CO poisoning in direct methanol fuel cells, the impact of interactions between intermediates on the reaction pathway is seldom studied. Herein, we contrive a PtBi model catalyst and realize a complete inhibition of the CO pathway and concurrent enhancement of the formate pathway in the alkaline methanol electrooxidation. The key role of Bi is enriching OH adsorbates (OH_ad) on the catalyst surface. The competitive adsorption of CO adsorbates (CO_ad) and OH_ad at Pt sites, complementing the thermodynamic contribution from alloying Bi with Pt, switches the intermediate from CO_ad to formate that circumvents CO poisoning. Hence, 8% Bi brings an approximately 6-fold increase in activity compared to pure Pt nanoparticles. This notion can be generalized to modify commercially available Pt/C catalysts by a microwave-assisted method, offering opportunities for the design and practical production of CO-tolerance electrocatalysts in an industrial setting.

Highly Selective Pd Nanosheet Aerogel Catalyst with Hybrid Strain Induced by Laser Irradiation and P Doping Postprocess

Strain engineering of electrocatalysts provides an effective strategy to improve the intrinsic catalytic activity. Here, the defect-rich crystalline/amorphous Pd nanosheet aerogel with hybrid microstrain and lattice strain is synthesized by combining laser irradiation and phosphorus doping methods. The surface strain exhibited by the microstrain and lattice strain shifts the d-band center of the electrocatalyst, enhancing the adsorption of intermediates in the ethanol oxidation reaction and thus improving the catalytic performances. The measured mass activity, specific activity and C1-path selectivity of the Pd nanosheet aerogel are 4.48, 3.06, and 5.06 times higher than those of commercial Pd/C, respectively. These findings afford a new strategy for the preparation of highl activity and C1 pathway selective catalysts and provide insight into the catalytic mechanism of strain-rich heterojunction materials based on tunable surface strain values.

Mixed-Dimensional Pt-Ni Alloy Polyhedral Nanochains as Bifunctional Electrocatalysts for Direct Methanol Fuel Cells

Pt nanocatalysts play a critical role in direct methanol fuel cells (DMFCs) due to their appropriate adsorption/desorption energy, yet suffer from an unbalanced relationship between size-dependent activity and stability. Herein, mixed-dimensional Pt-Ni alloy polyhedral nanochains (Pt-Ni PNCs) with an ordered assembly of a nanopolyhedra-nanowire-nanopolyhedra architecture are fabricated as bifunctional electrocatalysts for DMFCs, effectively alleviating the size effect. The Pt-Ni PNCs exhibit 7.23 times higher mass activity for the anodic methanol oxidation reaction (MOR) than that of commercial Pt/C. In situ Fourier transform infrared spectroscopy and CO stripping measurements demonstrate the prominent stability of the Pt-Ni PNCs to resist CO poisoning. For the cathodic oxygen reduction reaction (ORR), a positive half-wave potential exceeding Pt/C is achieved by the Pt-Ni PNCs, and it can be well maintained for 10 000 cycles with negligible activity decay. The designed nanostructure can alleviate the agglomeration and dissolution problems of 0D small-sized Pt-Ni alloy nanocrystals and enrich surface atom steps and active facets of 1D chain-like nanostructures. This work provides a proposed strategy to improve the catalytic performance of Pt-based nanocatalysts by constructing novel interfacial relationships in mixed dimensions to alleviate the imbalance between catalytic activity and catalytic stability caused by size effects.

Pd Metallene Aerogels with Single-Atom W Doping for Selective Ethanol Oxidation

The development of advanced electrocatalysts with satisfactory C1 pathway selectivity for the ethanol oxidation reaction (EOR) is critical. Herein, a bubbling CO-induced gelation method is developed in acetic acid at 50 °C to construct single-atom W-doped Pd metallene aerogels (denoted as SA W-Pd MAs) within 1 h. In light of the metallene structural advantages of noble metal aerogels and single-atom W decoration, the resultant SA W-Pd MAs exhibit an outstanding EOR performance with high C1 pathway selectivity. Density functional theory calculations validate that the SA W-Pd MAs greatly improve the formation of the CH₃O intermediate and the transformation of poisonous CO species to CO₂, thus resulting in high C1 pathway selectivity. Therefore, this work not only offers an effective gelation method to fabricate noble metal aerogels with atomic-scale building blocks but also presents guidance to develop high-efficiency EOR electrocatalysts.

Electrical Pulse Induced One-step Formation of Atomically Dispersed Pt on Oxide Clusters for Ultra-Low-Temperature Zinc-Air Battery

Atomically dispersed sites anchored on small oxide clusters are attractive new catalytic materials. Herein, we demonstrate an electrical pulse approach to synthesize atomically dispersed Pt on various oxide clusters in one step with nitrogen-doped carbon as the support (Pt₁ -MO_x /CN). As a proof-of-concept application, Pt₁ -FeO_x /CN is shown to exhibit high activity for oxygen reduction reaction (ORR) with a half-wave potential of 0.94 V vs RHE, in contrast to the poor catalytic performance of atomically dispersed Pt on large Fe₂ O₃ nanoparticles. Our work has revealed that, by tuning the size of the iron oxide down to the cluster regime, an optimal OH* adsorption strength for ORR is achieved on Pt₁ -FeO_x /CN due to the regulation of Pt-O bonds. The unique structure and high catalytic performance of Pt₁ -FeO_x /CN enable the Zinc-Air batteries an excellent performance at ultralow temperature of -40 °C with a high peak power density of 45.1 mW cm^-2 and remarkable cycling stability up to 120 h.

Synergetic Dual-Atom Catalysts: The Next Boom of Atomic Catalysts

Dual-atom catalysts (DACs) are an important branch of single-atom catalysts (SACs), in which the former can effectively break the dilemma faced by the traditional SACs. The synergetic effects between bimetallic atoms provide many active sites, promising to improve catalytic performance and even catalyze more complex reactions. This paper reviews the recent research progresses of two kinds of DACs, including homonuclear and heteronuclear DACs, and their applications in oxygen reduction, carbon dioxide reduction, hydrogen evolution, oxygen evolution, Zn-air batteries, tandem catalytic reactions, and so on. In addition, in order to promote the further development of DACs, the challenges and perspectives of DACs are put forward.

Ru-Co Pair Sites Catalyst Boosts the Energetics for the Oxygen Evolution Reaction

Manipulating the coordination environment of the active center via anion modulation to reveal tailored activity and selectivity has been widely achieved, especially for carbon-based single-atom site catalysts (SACs). However, tuning ligand fields of the active center by single-site metal cation regulation and identifying the effects on the resulting electronic configuration is seldom explored. Herein, we propose a single-site Ru cation coordination strategy to engineer the electronic properties by constructing a Ru/LiCoO₂ SAC with atomically dispersed Ru-Co pair sites. Benefitting from the strong electronic coupling between Ru and Co sites, the catalyst possesses an enhanced electrical conductivity and achieves near-optimal oxygen adsorption energies. Therefore, the optimized catalyst delivers superior oxygen evolution reaction (OER) activity with low overpotential, the high mass activity of 1000 A g_oxide ^-1 at a small overpotential of 335 mV, and excellent long-term stability. It also exhibits rapid kinetics with superior rate capability and outstanding durability in a zinc-air battery.

Tuning the Selective Ethanol Oxidation on Tensile-Trained Pt(110) Surface by Ir Single Atoms

Development of efficient and robust electrocatalysts for complete oxidation of ethanol is critical for the commercialization of direct ethanol fuel cells. However, the complete oxidation of ethanol suffers from poor efficiency due to the low C1 pathway selectivity. Herein, single-atomic Ir (Ir₁ ) on hcp-PtPb/fcc-Pt core-shell hexagonal nanoplates (PtPb@PtIr₁ HNPs) enclosed by Pt(110) surface with a 7.2% tensile strain is constructed to drive complete electro-oxidation of ethanol. Benefiting from the construction of Ir₁ sites, the PtPb@PtIr₁ HNPs exhibit a Faraday efficiency of 57.93% for the C1 pathway, which is ≈8.3 times higher than that of the commercial Pt/C-JM. Furthermore, the PtPb@PtIr₁ HNPs show a top-ranked electro-activity achieving 45.1-fold and 56.3-fold higher than the specific and mass activities of Pt/C-JM, respectively. Meanwhile, the durability can be significantly enhanced by the construction of Ir₁ sites. Density functional theory calculations indicate that the strong synergy on the PtPb@PtIr₁ HNPs surface significantly promotes the breaking of CC bond of CH₂ CO* and facilitates CO oxidation and suppresses the deactivation of the catalyst. This work offers a unique single-atom approach using low-coordination active sites on shape-controlled nanocrystals to tune the selectivity and activity toward complicated catalytic reactions.

Highly Curved, Quasi-Single-Crystalline Mesoporous Metal Nanoplates Promote CC Bond Cleavage in Ethanol Oxidation Electrocatalysis

The ability to manipulate metal nanocrystals with well-defined morphologies and structures is greatly important in material chemistry, catalysis chemistry, nanoscience, and nanotechnology. Although 2D metals serve as interesting platforms, further manipulating them in solution with highly penetrated mesopores and ideal crystallinity remains a huge challenge. Here, an easy yet powerful synthesis strategy for manipulating the mesoporous structure and crystallinity of 2D metals in a controlled manner with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra iodine-ion as the structure/facet-selective agent is reported. This strategy allows for preparing an unprecedented type of 2D quasi-single-crystalline mesoporous nanoplates (SMPs) with highly curved morphology and controlled metal composition. The products, for example, PdCu SMPs, feature abundant undercoordinated sites, optimized electronic structures, excellent electron/mass transfers, and confined mesopore environments. Curved PdCu SMPs exhibit remarkable electrocatalytic activity of 6.09 A mg_Pd ^-1 and stability for ethanol oxidation reaction (EOR) compared with its counterpart catalysts and commercial Pd/C. More importantly, PdCu SMPs are highly selective for EOR electrocatalysis that dramatically promotes C-C bond cleavage with a superior C1 pathway selectivity as high as 72.1%.

Unveiling the Synergistic Effects of Monodisperse Sea Urchin-like PdPb Alloy Nanodendrites as Stable Electrocatalysts for Ethylene Glycol and Glycerol Oxidation Reactions

In recent times, the fabrication of noble metal-based catalysts with controllable morphologies has become a research hotspot. Electrocatalytic devices with excellent catalytic performance and enhanced durability for the ethylene glycol oxidation reaction (EGOR) and the glycerol oxidation reaction (GOR) are significant for commercial direct fuel cells. Herein, a series of PdPb sea urchin-like nanodendrite (ND) structures with controllable molar ratios were synthesized as EGOR and GOR electrocatalysts of high efficiency. The optimized structurally regular Pd₃Pb NDs exhibit the best electrocatalytic activity and outstanding stability compared to other samples and commercial Pt/C. In addition, the integrated Pb on Pd₃Pb NDs can mitigate the bond energy the intermediates generate and further boost the electrooxidation of the intermediates by supplying enough active sites without considering its intrinsic structure, which is beneficial to the enhanced EGOR and GOR activity and stability. With the assistance of electrochemical measurement, the mechanism of the enhanced alloy was further investigated. This paper presents a promising strategy to fabricate catalysts with stable structures, which will elucidate a very promising approach for developing Pd-based catalysts for further applications in fuel cells.