Graphdiyne: A New Carbon Allotrope for Electrochemiluminescence

Polymerized carbon dots with high electrochemiluminescence efficiency and long wavelength ECL emission for ultrasensitive detection of MicroRNA-222

Herein, a new electrochemiluminescence (ECL) biosensor was constructed with highly efficient polymerized carbon dots (PCDs) as ECL emitter and the improved localized catalytic hairpin assembly (L-CHA) as signal amplifier for ultrasensitive detection of microRNA-222 (miRNA-222). Impressively, compared to the traditional carbon dots with inefficient blue region ECL emission, PCDs with N, O co-dope and large conjugated π-system showed high electrical conductivity, narrow band gap and strong radiative transition, which could exhibit high ECL efficiency to improve the sensitivity of detection and long wavelength ECL emission to achieve deep tissue penetration for reducing biological damage. Furthermore, the trace target miRNA-222 could be efficiently converted into large amounts of output DNA labelled with the quencher dopamine (S-DA) through the L-CHA reaction to significantly enhance the target amplification efficiency for further improving the sensitivity of detection. Thus, the ECL biosensor could achieve the ultrasensitive detection of miRNA-222 from 100 aM to 100 pM with the detection limit of 76 aM. Therefore, this work proposed a novel CDs with high ECL efficiency and long wavelength ECL emission, which not only was used to build an ultrasensitive biosensor for biomolecules detection in clinical diagnosis, but also served as a potential emitter for ECL bioimaging.

Properties, Synthesis and Emerging Applications of Graphdiyne: A Journey Through Recent Advancements

Graphdiyne (GDY) is a new variant of nano-carbon material with excellent chemical, physical and electronic properties. It has attracted wide attention from researchers and industrialists for its extensive role in the fields of optics, electronics, bio-medics and energy. The unique arrangement of sp-sp2 carbon atoms, linear acetylenic linkages, uniform pores and highly conjugated structure offer numerous potentials for further exploration of GDY materials. However, since the material is at its infancy, not much understanding is available regarding its properties, growth mechanism and future applications. Therefore, in this review, readers are guided through a brief discussion on GDY's properties, different synthesis procedures with a special focus on surface functionalization and a list of applications for GDY. The review also critically analyses the advantages and disadvantages of each synthesis route and emphasizes the future scope of the material.

Single-Atom Iron Doped Carbon Dots with Highly Efficient Electrochemiluminescence for Ultrasensitive Detection of MicroRNAs

Herein, single-atom iron doped carbon dots (SA Fe-CDs) were successfully prepared as novel electrochemiluminescence (ECL) emitters with high ECL efficiency, and a biosensor was constructed to ultrasensitively detect microRNA-222 (miRNA-222). Importantly, compared with the conventional without single-atom doped CDs with low ECL efficiency, SA Fe-CDs exhibited strong ECL efficiency, in which single-atom iron as an advanced coreactant accelerator could significantly enhance the generation of reactive oxygen species (ROS) from the coreactant S2O82- for improving the ECL efficiency. Moreover, a neoteric amplification strategy combining the improved strand displacement amplification with Nt.BbvCI enzyme-induced target amplification (ISDA-EITA) could produce 4 output DNAs in every cycle, which greatly improved the amplification efficiency. Thus, a useful ECL biosensor was built with a detection limit of 16.60 aM in the range of 100 aM to 1 nM for detecting traces of miRNA-222. In addition, miRNA-222 in cancer cell lysate (MHCC-97L) was successfully detected by using the ECL biosensor. Therefore, this strategy provides highly efficient single-atom doped ECL emitters for the construction of sensitive ECL biosensing platforms in the biological field and clinical diagnosis.

Enhanced Aggregation-Induced Delayed Electrochemiluminescence Triggered by Spatial Perturbation of Organic Dots

Development of highly efficient, heavy-metal-free electrochemiluminescence (ECL) materials is attractive but still challenging. Herein, we report an aggregation-induced delayed ECL (AIDECL) active organic dot (OD) composed of a tert-butoxy-group-substituted benzophenone-dimethylacridine compound, which shows high ECL efficiency. The resultant ODs exhibit 2.1-fold higher ECL efficiency compared to control AIDECL-active ODs. Molecular stacking combined with theoretical calculations suggests that tert-butoxy groups effectively participate in the intermolecular interactions, further inhibiting the molecular motions in the aggregated states and thus accelerating radiative decay. On the basis of these ODs exhibiting excellent ECL performance, a proof-of-concept biosensor is constructed for the detection of miR-16 associated with Alzheimer's disease, which demonstrates excellent detection ability with the limit of detection of 1.7 fM. This work provides a new approach to improve the ECL efficiency and enriches the fundamental understanding of the structure-property relationship.

A dual-mode biosensor based on silica inverse opal photonic crystals modulated electrochemiluminescence and dye displacement colorimetry for the sensitive detection of synthetic cathinone in water environment

To address the challenges posed by signal capacity limitations and the reliance of sensing methods on single analytical information, this study developed an electrochemiluminescence (ECL) and colorimetric dual-mode sensing platform for the precise detection of 4-chloroethcathinone (4-CEC) in water environments. Firstly, the accurate alignment of the reflection wavelength of appropriately sized silica inverse opal photonic crystals (SIOPCs) with the ECL emission wavelength of luminescent metal-organic frameworks (PCN-224) has been achieved via diameter modulation. This innovative design, which cleverly utilized the band-edge effect, improved the luminous intensity of the ECL sensor, leading to a significant boost in analytical performance. Secondly, the establishment of a colorimetric detection method for confirming the presence of 4-CEC in samples through visual observation of color changes was achieved by employing an aptamer-based dye displacement reaction, utilizing differential binding affinities between the aptamer and both the sulforhodamine B (SRB) and 4-CEC. Under the optimal experimental conditions, the dual-mode sensor demonstrated ECL detection of limits (LOD) of 2.6 × 10-13 g/L and colorimetric LOD of 6.5 ng/L for 4-CEC. These findings highlighted the tremendous potential of developing streamlined and efficient dual-signal readout platforms using ECL aptamer sensors for the precise determination of other Synthetic cathinones (SCs) in water environments.

σ-Hole Effect-Induced Electroluminescence of Halogen Cocrystals for Determination of Iodide in Seawater

Developing new electrochemiluminescence (ECL) luminators with high stability, wide applicability, and strong designability is of great strategic significance to promote the ECL field to the frontier. Here, driven by the I···N bond, 1,3,5-trifluoro-2,4,6-triiodobenzene (TFTI) and 2,4,6-trimethyl-1,3,5-triazine (TMT) self-assembled into a novel halogen cocrystal (TFTI-TMT) through slow solution volatilization. Significant difference of charge density existed between the N atoms on TMT and the σ-hole of the I atoms on TFTI. Upon the induction of σ-hole effect, high-speed and spontaneous charge transferring from TMT to the σ-hole of TFTI occurred, stimulating exciting ECL signals. Besides, the σ-hole of the I atoms could capture iodine ions specifically, which blocked the original charge transfer from the N atoms to the σ-hole, causing the ECL signal of TFTI-TMT to undergo a quenching rate as high as 92.9%. Excitingly, the ECL sensing of TFTI-TMT toward I- possessed a wide linear range (10-5000 nM) and ultralow detection limit (3 nM) in a real water sample. The halogen cocrystal strategy makes σ-hole a remarkable new viewpoint of ECL luminator design and enables ECL analysis technology to contribute to addressing the environmental and health threats posed by iodide pollution.

Exploring the Fate of Copper Ions in the Synthesis of Graphdiyne

Copper is a crucial catalyst in the synthesis of graphdiyne (GDY). However, as catalysts, the final fate of the copper ions has hardly been concerned, which are usually treated as impurities. Here, it is observed that after simple washing with water and ethanol, GDY still contains a certain amount of copper ions, and demonstrated that the copper ions are adsorbed at the atomic layers of GDY. Furthermore, we transformed in situ the copper ions into ultrathin Cu nanocrystals, and the obtained Cu/GDY hybrids can be generally converted into a series of metal/GDY hybrid materials, such as Ag/GDY, Au/GDY, Pt/GDY, Pd/GDY, and Rh/GDY. The Cu/GDY hybrids exhibit extraordinary surface enhanced Raman scattering effect and can be applied in pollutant efficient enrichment and detection.

Graphyne and graphdiyne nanoribbons: from their structures and properties to potential applications

Graphyne (GY) and graphdiyne (GDY) have properties including unique sp- and sp2-hybrid carbon atomic structures, natural non-zero band gaps, and highly conjugated π electrons. GY and GDY have good application prospects in many fields, including catalysis, solar cells, sensors, and modulators. Under the influence of the boundary effect and quantum size effect, quasi-one-dimensional graphyne nanoribbons (GYNRs) and graphdiyne nanoribbons (GDYNRs) show novel physical properties. The various structures available give GYNRs and GDYNRs greater band structure and electronic properties, and their excellent physical and chemical properties differ from those of two-dimensional GY and GDY. However, the development of GYNRs and GDYNRs still faces problems, including issues with accurate synthesis, advanced structural characterization, the structure-performance correlation of materials, and potential applications. In this review, the structures and physical properties of quasi-one-dimensional GYNRs and GDYNRs are reviewed, their advantages and disadvantages are summarized, and their potential applications are highlighted. This review provides a meaningful basis and research foundation for the design and development of high-performance materials and devices based on GYNRs and GDYNRs in the field of energy.

Nanoconfined Cathodic Electrochemiluminescence for Self-Sensitized Bioimaging of Membrane Protein

Self-enhanced electrochemiluminescence (ECL) can be achieved via the confinement of coreactants and ECL emitters in a single nanostructure. This strategy has been used for the design of anodic ECL systems with amine compounds as coreactants. In this work, a novel confinement system was proposed by codoping positively charged ECL emitter tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) and negatively charged coreactant peroxydisulfate (S2O82-) in silica nanoparticles. The codoping process could be performed by introducing S2O82- in cationic poly(diallyldimethylammonium chloride) (PDDA) to form PDDA@S2O82- and then encapsulating it and Ru(bpy)32+ in the Triton X-100 vesicle followed by the hydrolysis of tetraethyl ortosilicate, surface modification, and demulsification. The obtained RuSSNs exhibited good homogeneity, excellent monodispersity, acceptable biocompatibility, and 2.9-fold stronger ECL emission than Ru(bpy)32+-doped silica nanoparticles at an equal amount of nanoparticles in the presence of 0.1 M K2S2O8. Thus, an in situ self-sensitized cathodic ECL imaging method was designed for the monitoring of glycoprotein on living cell membranes. This work provides a new way for the modification, enhancement, and application of nano-ECL emitters in biological analysis.

Ligand-induced Assembly of Copper Nanoclusters with Enhanced Electrochemical Excitation and Radiative Transition for Electrochemiluminescence

Copper nanoclusters (CuNCs) are emerging electrochemiluminescence (ECL) emitters with unique molecule-like electronic structures, high abundance, and low cost. However, the synthesis of CuNCs with high ECL efficiency and stability in a scalable manner remains challenging. Here, we report a facile gram-scale approach for preparing self-assembled CuNCs (CuNCsAssy ) induced by ligands with exceptionally boosted anodic ECL and stability. Compared to the disordered aggregates that are inactive in ECL, the CuNCsAssy shows a record anodic ECL efficiency for CuNCs (10 %, wavelength-corrected, relative to Ru(bpy)3 Cl2 /tripropylamine). Mechanism studies revealed the unusual dual functions of ligands in simultaneously facilitating electrochemical excitation and radiative transition. Moreover, the assembly addressed the limitation of poor stability of conventional CuNCs. As a proof of concept, an ECL biosensor for alkaline phosphatase detection was successfully constructed with an ultralow limit of detection of 8.1×10-6  U/L.

Surfactant-free interfacial growth of graphdiyne hollow microspheres and the mechanistic origin of their SERS activity

As a two-dimensional carbon allotrope, graphdiyne possesses a direct band gap, excellent charge carrier mobility, and uniformly distributed pores. Here, a surfactant-free growth method is developed to efficiently synthesize graphdiyne hollow microspheres at liquid‒liquid interfaces with a self-supporting structure, which avoids the influence of surfactants on product properties. We demonstrate that pristine graphdiyne hollow microspheres, without any additional functionalization, show a strong surface-enhanced Raman scattering effect with an enhancement factor of 3.7 × 107 and a detection limit of 1 × 10-12 M for rhodamine 6 G, which is approximately 1000 times that of graphene. Experimental measurements and first-principles density functional theory simulations confirm the hypothesis that the surface-enhanced Raman scattering activity can be attributed to an efficiency interfacial charge transfer within the graphdiyne-molecule system.

Highly Selective Electrocatalytic Olefin Hydrogenation in Aqueous Solution

Selective hydrogenation of olefins with water as the hydrogen source at ambient conditions is still a big challenge in the field of catalysis. Herein, the electrocatalytic hydrogenation of purely aliphatic and functionalized olefins was achieved by using graphdiyne based copper oxide quantum dots (Cux O/GDY) as cathodic electrodes and water as the hydrogen source, with high activity and selectivity in aqueous solution at high current density under ambient temperature and pressure. In particular, the sp-/sp2 -hybridized graphdiyne catalyst allows the selective hydrogenation of cis-trans isomeric olefins. The chemical and electronic structure of the GDY results in the incomplete charge transfer between GDY and Cu atoms to optimize the adsorption/desorption of the reaction intermediates and results in high reaction selectivity and activity for hydrogenation reactions.

Dual-Signal Integrated Aptasensor for Microcystin-LR Detection via In Situ Generation of Silver Nanoclusters Induced by Circular DNA Strand Displacement Reactions

Inspired by the signal accumulation of circular DNA strand displacement reactions (CD-SDRs) and the in situ generation of silver nanoclusters (AgNCs) from signature template sequences, a dual-signal integrated aptasensor was designed for microcystin-LR (MC-LR) detection. The aptamer was programmed to be included in an enzyme-free CD-SDR, which utilized MC-LR as the primer and outputted the H1/H2 dsDNA in a continuous manner according to the ideal state. Ingeniously, H1/H2 dsDNA was enriched with signature template sequences, allowing in situ generation of AgNCs signal probes. To enhance the signal amplification performance, co-reaction acceleration strategies and CRISPR-Cas12a nucleases were invoked. The H1/H2 dsDNA could trigger the incidental cleavage performance of CRISPR-Cas12a nucleases: cis-cleavage reduced signature template sequences for the synthetic AgNCs, while trans-cleavage enabled fluorescence (FL) analysis. Meanwhile, AuPtAg was selected as the substrate material to facilitate the S2O82- reduction reaction for enhancing the electrochemiluminescence (ECL) basal signals. ECL and FL detection do not interfere with each other and have improved accuracy and sensitivity, with limits of detection of 0.011 and 0.023 pmol/L, respectively. This widens the path for designing dual-mode sensing strategies for signal amplification.

Two-Dimensional Carbon Graphdiyne: Advances in Fundamental and Application Research

Graphdiyne (GDY), a rising star of carbon allotropes, features a two-dimensional all-carbon network with the cohybridization of sp and sp² carbon atoms and represents a trend and research direction in the development of carbon materials. The sp/sp²-hybridized structure of GDY endows it with numerous advantages and advancements in controlled growth, assembly, and performance tuning, and many studies have shown that GDY has been a key material for innovation and development in the fields of catalysis, energy, photoelectric conversion, mode conversion and transformation of electronic devices, detectors, life sciences, etc. In the past ten years, the fundamental scientific issues related to GDY have been understood, showing differences from traditional carbon materials in controlled growth, chemical and physical properties and mechanisms, and attracting extensive attention from many scientists. GDY has gradually developed into one of the frontiers of chemistry and materials science, and has entered the rapid development period, producing large numbers of fundamental and applied research achievements in the fundamental and applied research of carbon materials. For the exploration of frontier scientific concepts and phenomena in carbon science research, there is great potential to promote progress in the fields of energy, catalysis, intelligent information, optoelectronics, and life sciences. In this review, the growth, self-assembly method, aggregation structure, chemical modification, and doping of GDY are shown, and the theoretical calculation and simulation and fundamental properties of GDY are also fully introduced. In particular, the applications of GDY and its formed aggregates in catalysis, energy storage, photoelectronic, biomedicine, environmental science, life science, detectors, and material separation are introduced.

S-CdIn2S4: A novel near-infrared emitter triggered by low potential for constructing a dual-mode immunosensing platform

CdIn₂S₄ is an interesting ternary metal sulfide whose narrow band gap and tunable optical properties offer new opportunities for the development of novel ECL emitters. Here, we use a simple hydrothermal synthesis to obtain hollow spindle CdIn₂S₄ (S-CIS), which exhibits strong near-infrared electrochemiluminescence (ECL) emission with K₂S₂O₈ as a coreactant at a low excitation potential (-1.3 V), which is encouraging. The lower excitation potential of S-CIS is probably due to the low band gap energy, which makes the excitation potential positively shift. This lower excitation potential reduces the side-reactions caused by high voltages, effectively avoiding irreversible damage to biomolecules, and protecting the biological activity of antigens and antibodides. In this work, new features of S-CIS in ECL studies are also presented, demonstrating that the ECL emission mechanism of S-CIS is generated by surface state transitions and that S-CIS exhibits excellent near-infrared (NIR) characteristics. Importantly, we introduced S-CIS into electrochemical impedance spectroscopy (EIS) and ECL to the construct a dual-mode sensing platform to achieve AFP detection. The two models with intrinsic reference calibration and high accuracy showed outstanding analytical performance in AFP detection. The detection limits were 0.862 pg mL^-1 and 16.8 fg mL^-1, respectively. This study demonstrates the key role and great application potential of S-CIS as a novel NIR emitter with easy preparation, low cost and great performance in the development of a simple, efficient and ultrasensitive dual-mode response sensing platform for early clinical use.

PEG-functionalized black phosphorus quantum dots as stable and biocompatible electrochemiluminescence luminophores for sensitive detection of tumor biomarker

Despite black phosphorous (BP) QDs possess the merits of size-tunable band-gap, high electron mobility, and intrinsic defects, the spontaneous agglomeration and rapid oxidation of BP QDs in aqueous solution caused low electrochemiluminescence (ECL) efficiency and unstable ECL signal, which confined its further application of biological analysis. Herein, polyethylene glycol-functionalized BP QDs (PEG@BP QDs) were prepared showing an efficient and stable ECL response, which is attributed to the fact that PEG as protectant not only effectively prevented the spontaneous agglomeration, but also restrained the rapid oxidation of BP QDs in aqueous solution. As proof-of-concept, PEG@BP QDs were used as an efficient ECL emitter to combine with palindrome amplification-induced DNA walker to construct a sensitive ECL aptasensing platform for detecting cancer marker mucin 1 (MUC1). Interestingly, with the aid of positively charged thiolated PEG, the reaction rate of DNA walker on the electrode interface was clearly increased for the recovery of the ECL signal. The ECL aptasensor provides sensitive determination with the detection limit of 16.5 fg/mL. The proposed strategy paves a path for the development of efficient and stable ECL nanomaterials to construct biosensors for biosensing and clinical diagnosis.

Gold nanocluster-confined covalent organic frameworks as bifunctional probes for electrochemiluminescence and colorimetric dual-response sensing of Pb2

The development of bifunctional signal probes based on a single component is highly desirable for sensitive and simple dual-mode detection of Pb²⁺. Here, novel gold nanocluster-confined covalent organic frameworks (AuNCs@COFs) were fabricated as a bisignal generator to enable electrochemiluminescence (ECL) and colorimetric dual-response sensing. AuNCs with both intrinsic ECL and peroxidase-like activity were confined into the ultrasmall pores of the COFs via an in situ growth method. On the one hand, the space-confinement effect of the COFs closed the ligand motion-induced nonradiative transition channels of the AuNCs. As a result, the AuNCs@COFs exhibited a 3.3-fold enhancement in anodic ECL efficiency compared to the solid-state aggregated AuNCs using triethylamine as the coreactant. On the other hand, due to the outstanding spatial dispersibility of the AuNCs in the structurally ordered COFs, a high density of active catalytic sites and accelerated electron transfer were obtained, leading to the promotion of the enzyme-like catalytic capacity of the composite. To validate its practical applicability, a Pb²⁺-triggered dual-response sensing system was proposed based on the aptamer-regulated ECL and peroxidase-like activity of the AuNCs@COFs. Sensitive determinations down to 7.9 pM for the ECL mode and 0.56 nM for the colorimetric mode were obtained. This work provides an approach for designing single element-based bifunctional signal probes for dual-mode detection of Pb²⁺.

Nitrogen-, Sulfur-, and Fluorine-Codoped Carbon Dots with Low Excitation Potential and High Electrochemiluminescence Efficiency for Sensitive Detection of Matrix Metalloproteinase-2

In this study, nitrogen-, sulfur-, and fluorine-codoped carbon dots (NSF-CDs) with high electrochemiluminescence (ECL) efficiency were developed as novel emitters to fabricate an ECL biosensor for sensitive detection of matrix metalloproteinase 2 (MMP-2). Impressively, compared to previously reported CDs, NSF-CDs with narrow band gap not only decreased the excitation voltage to reduce the side reaction and the damage on biomolecules but also had hydrogen bonds to vastly enhance the ECL efficiency. Furthermore, an improved exonuclease III (Exo III)-assisted nucleic acid amplification method was established to convert trace MMP-2 into a mass of output DNA, which greatly improved the target conversion efficiency and ECL signal. Hence, the ECL biosensor has realized the sensitive detection of MMP-2 proteins from 10 fg/mL to 10 ng/mL with a limit of detection of 6.83 fg/mL and has been successfully applied in the detection of MMP-2 from Hela and MCF-7 cancer cells. This strategy offered neoteric CDs as ECL emitters for sensitive testing of biomarkers in medical research.

Curved π-Conjugated Helical Carbon Frameworks: Syntheses, Structural Analyses, and Properties

Two enantiomers with helical carbon frameworks (M-HCFa and P-HCFa) and their conformational isomers (M-HCFb and P-HCFb) have been synthesized and characterized. The single-crystal analysis revealed the novel structures in which three propeller blades spiro-fused on two central benzene rings. The optical properties were further investigated, and stable bipolar electrochemiluminescence emissions were discovered for the first time existing in helical carbon frameworks, which provide new insights into the future development of high-performance molecular luminescent devices.

Studies on Annihilation and Coreactant Electrochemiluminescence of Thermally Activated Delayed Fluorescent Molecules in Organic Medium

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.

Highly Efficient Aggregation-Induced Electrochemiluminescence of Al(III)-Cbatpy Metal-Organic Gels Obtained by Ultrarapid Self-Assembly for a Biosensing Application

Aggregation-induced electrochemiluminescence (AIECL) has attracted extensive interest due to the significant increase in ECL response by restricting free intramolecular rotation and torsion, but traditional AIECL emitters suffer from limited ECL efficiency, high cost, and complex synthetic steps, dramatically limiting their applications. Herein, novel Al(III)-Cbatpy metal-organic gels (Al(III)-Cbatpy-MOGs) with nanofiber morphology and ultrarapid coordination of Al³⁺ and 4'-carboxylic acid-2,2':6',2″-terpyridine (Cbatpy) are developed, which demonstrates an excellent AIECL enhancement behavior far beyond that reported in ECL supramolecular gels. In view of the strong affinity of N and O atoms in Cbatpy toward Al³⁺, Al(III)-Cbatpy-MOGs with high viscosity and stability can be assembled in one step within about 15 s, easily conquering the main predicaments of current AIECL emitters: complicated synthesis steps and poor film formation. Impressively, the ECL efficiency of Al(III)-Cbatpy-MOGs with superemission is about 20 times higher than that of individual Cbatpy molecules, which is attributed to the aggregation of the organic ligand Cbatpy restricting intramolecular rotation and torsion to reduce nonradiative relaxation. Furthermore, compared with traditional metal complexes, Al(III)-Cbatpy-MOGs show the benefits of remarkable biocompatibility and low cost without the involvement of any organic solvents, noble metals, and rare metals. As proof, a "signal-off" sensing platform based on an Al(III)-Cbatpy-MOGs/S₂O₈^2- system was constructed for the sensitive detection of dopamine (DA) with a low detection limit of 0.34 nM. This strategy provides a novel method to prepare cheap metal-organic gels as a highly efficient AIECL emitter, which is promising as a luminescent molecular device and biosensor for clinical diagnostic applications.

Coreactant-free and Near-Infrared Electrochemiluminescence Immunoassay with n-Type Au Nanocrystals as Luminophores

The electrochemiluminescence (ECL) bioassay is prominently carried out with the involvement of the coreactant. To remove the detrimental effects of the coreactant on the ECL of luminophores, herein, a promising ECL immunoassay strategy with biocompatible nanoparticles as the luminophore is proposed, which involves directly and electrochemically oxidizing the luminophore methionine-capped Au (Met@Au) nanocrystals (NCs) without the participation of any coreactant. Met@Au NCs are a kind of n-type nanoparticles, and they can be electrochemically injected with valence band (VB) holes around +0.80 and +1.10 V (vs Ag/AgCl). The electrochemically injected exogenous VB hole can recombine with the endogenous conduction band electron of Met@Au NCs and eventually bring out two coreactant-free and near-infrared ECL processes around 0.80 V (ECL-1) and 1.10 V (ECL-2). The intensity of coreactant-free ECL is primarily determined by the electrochemical oxidation-induced hole-injection process. ECL-2 is considerably stronger than ECL-1 and can be exploited for determining the carcinoembryonic antigen (CEA) in a sandwich immunoassay procedure with a linear range from 0.1 to 50 pg/mL as well as a limit of detection of 0.03 pg/mL (S/N = 3).