Anisotropy in a 2D Perovskite Ferroelectric Drives Self‐Powered Polarization‐Sensitive Photoresponse for Ultraviolet Solar‐Blind Polarized‐Light Detection

Achieving High Operating-Temperature Self-powered X-Ray Detection in Multilayered Hybrid Perovskites through Arylamine Intercalation

Polar metal halide hybrid perovskites (PHPs) that exhibit outstanding bulk photovoltaic effect (BPVE), excellent semiconductor features, and strong radiation absorption ability, have shown prominent advantages in highly sensitive direct X-ray detection. However, it is still a challenge to explore PHPs with high BPVE temperature ranges, answering the demand of developing thermally stable passive X-ray detection. Herein, by intercalating arylamine into lead tribromide and inducing order-disorder phase transition, a 2D multilayered PHPs (BZA)2(MA)Pb2Br7 (BZPB, BZA = benzylamine, MA = methylamine) is synthesized. BZPB crystallizes in a polar space group Aea2 at a low-temperature phase and demonstrates a significant open-circuit of 0.3 V deriving from BPVE under X-ray irradiation. Meanwhile, the strong X-ray absorption coefficient and outstanding carrier transport capability of the bilayered lead halide framework associated with the polar BPVE give BZPB excellent X-ray detection abilities. At 0 V bias, the impressive sensitivity of BZPB is 98 µC Gy-1 cm-2. Importantly, the introduction of the rigid BZA ring increases the energy barrier of phase transition and thus dramatically enhances the X-ray detection operating temperature of BZPB up to 409 K without significant performance degradation. This work strongly reveals the great potential of rational design of metal halide hybrid perovskites for X-ray detection applications.

Pyroelectric-Accelerated Perovskite Photodetector for Picosecond Light Detection and Ranging

Light detection and ranging (LiDAR) is indispensable in applications such as unmanned aerial vehicles, autonomous driving, and biomimetic robots. However, the precision and available distance of LiDAR are constrained by the speed and sensitivity of the photodetector, necessitating the use of expensive and energy-consuming avalanche diodes. To address these challenges, in this study, a pyroelectricity-based acceleration strategy with 2D-(graded 3D) perovskite heterojunction is proposed to achieve a record high speed (27.7 ns with an active area of 9 mm2, and 176 ps with an active area of 0.2 mm2) and high responsivity (0.65 A W-1) at zero bias. This success is attributed to the unique mechanism where the electrons from the pyroelectric effect at the Cl-rich 2D/3D interface directly recombine with excess holes during light-dark transitions, breaking speed limitations related to carrier mobility and capacitive effect. Furthermore, the introduced pyroelectric effect significantly enhances the photoresponse, resulting in a self-powered external quantum efficiency exceeding 100%. The study also demonstrates precise position detection at the centimeter level. In conclusion, this research presents a pioneering approach for developing high-speed photodiodes with exceptional sensitivity, mitigating energy and cost concerns in LiDAR applications.

Unique Perovskitizer N─Pb Bond Switching Induced Polar Photovoltaic Effect in Trilayered Hybrid Perovskite

Polar photovoltaic effect (PPE) has attracted great attention in regulating desired optoelectronic properties, which can be driven by order-disorder and displacive phase transitions. Bond-switching is also a feasible method to induce PPE, but such investigation is very rare. Lead-halide hybrid perovskite (LHHP) is an outstanding photodetection material; lead atoms possess rich coordination modes to provide possibilities to construct switchable bonds. Here, a unique perovskitizer N─Pb bond-switching is disclosed to induce polar photovoltage in the emerging LHHP, PA2MHy2Pb3Br10 (1, PA = n-propylamine, MHy = methylhydrazine). Interestingly, the perovskitizer MHy+ provides 2s2 lone pair while the Pb atom affords empty d orbitals, which coordinate with each other to generate a flexible N─Pb bond. Further, the introduction of N─Pb bonds results in a high distortion of the PbBr6 octahedron to form local polarity and further orientation to induce spontaneous polarization. More importantly, such a flexible N─Pb bond switching mechanism drives a notable PPE and controllable polarized photo-response, a polarization ratio up to 9.7 at the polar phase in striking contrast with the non-polar phase (1.03). The work provides the first demonstration of bond-switching to induce polar phase transition and polar photovoltage in the photoconductive hybrid perovskites for photoelectric applications.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Ferroelectric-Optoelectronic Hybrid System for Photodetection

Photodetectors (PDs), as functional devices based on photon-to-electron conversion, are an indispensable component for the next-generation Internet of Things system. The research of advanced and efficient PDs that meet the diverse demands is becoming a major task. Ferroelectric materials can develop a unique spontaneous polarization due to the symmetry-breaking of the unit cell, which is switchable under an external electric field. Ferroelectric polarization field has the intrinsic characteristics of non-volatilization and rewritability. Introducing ferroelectrics to effectively manipulate the band bending and carrier transport can be non-destructive and controllable in the ferroelectric-optoelectronic hybrid systems. Hence, ferroelectric integration offers a promising strategy for high-performance photoelectric detection. This paper reviews the fundamentals of optoelectronic and ferroelectric materials, and their interactions in hybrid photodetection systems. The first section introduces the characteristics and applications of typical optoelectronic and ferroelectric materials. Then, the interplay mechanisms, modulation effects, and typical device structures of ferroelectric-optoelectronic hybrid systems are discussed. Finally, in summary and perspective section, the progress of ferroelectrics integrated PDs is summed up and the challenges of ferroelectrics in the field of optoelectronics are considered.

Mixing cage cations in 2D metal-halide ferroelectrics enhances the ferro-pyro-phototronic effect for self-driven photopyroelectric detection

The ferro-pyro-phototronic (FPP) effect, coupling photoexcited pyroelectricity and photovoltaics, paves an effective way to modulate charge-carrier behavior of optoelectronic devices. However, reports of promising FPP-active systems remain quite scarce due to a lack of knowledge on the coupling mechanism. Here, we have successfully enhanced the FPP effect in a series of ferroelectrics, BA2Cs1-xMAxPb2Br7 (BA = butylammonium, MA = methylammonium, 0 ≤ x ≤ 0.34), rationally assembled by mixing cage cations into 2D metal-halide perovskites. Strikingly, chemical alloying of Cs+/MA+ cations leads to the reduction of exciton binding energy, as verified by the x = 0.34 component; this facilitates exciton dissociation into free charge-carriers and boosts photo-activities. The crystal detector thus displays enhanced FPP current at zero bias, almost more than 10 times higher than that of the x = 0 prototype. As an innovative study on the FPP effect, this work affords new insight into the fundamental principle of ferroelectrics and creates a new strategy for self-driven photodetection.

Bulk Photovoltaic Effect in Two-Dimensional Distorted MoTe2

In future solar cell technologies, the thermodynamic Shockley-Queisser limit for solar-to-current conversion in traditional p-n junctions could potentially be overcome with a bulk photovoltaic effect by creating an inversion broken symmetry in piezoelectric or ferroelectric materials. Here, we unveiled mechanical distortion-induced bulk photovoltaic behavior in a two-dimensional (2D) material, MoTe2, caused by the phase transition and broken inversion symmetry in MoTe2. The phase transition from single-crystalline semiconducting 2H-MoTe2 to semimetallic 1T'-MoTe2 was confirmed using X-ray photoelectron spectroscopy (XPS). We used a micrometer-scale system to measure the absorption of energy, which reduced from 800 to 63 meV during phase transformation from hexagonal to distorted octahedral and revealed a smaller bandgap semimetallic behavior. Experimentally, a large bulk photovoltaic response is anticipated with the maximum photovoltage VOC = 16 mV and a positive signal of the ISC = 60 μA (400 nm, 90.4 Wcm-2) in the absence of an external electric field. The maximum values of both R and EQE were found to be 98 mAW-1 and 30%, respectively. Our findings are distinctive features of the photocurrent responses caused by in-plane polarity and its potential from a wide pool of established TMD-based nanomaterials and a cutting-edge approach to optimize the efficiency in converting photons-to-electricity for power harvesting optoelectronics devices.

Facile Control of Ferroelectricity Driven by Ingenious Interaction Engineering

Construction of ferroelectric and optimization of macroscopic polarization has attracted tremendous attention for next generation light weight and flexible devices, which brings fundamental vitality for molecular ferroelectrics. However, effective molecular tailoring toward cations makes ferroelectric synthesis and modification relatively elaborate. Here, the study proposes a facile method to realize triggering and optimization of ferroelectricity. The experimental and theoretical investigation reveals that orientation and alignment of polar cations, dominated factors in molecular ferroelectrics, can be controlled by easily processed anionic modification. In one respect, ferroelectricity is induced by strengthened intermolecular interaction. Moreover, ≈50% of microscopic polarization enhancement (from 8.07 to 11.68 µC cm-2 ) and doubling of equivalent polarization direction (from 4 to 8) are realized in resultant ferroelectric FEtQ2ZnBrI3 (FEQZBI, FEtQ = N-fluoroethyl-quinuclidine). The work offers a totally novel platform for control of ferroelectricity in organic-inorganic hybrid ferroelectrics and a deep insight of structure-property correlations.