Simultaneous Detection of L-Lactate and D-Glucose Using DNA Aptamers in Human Blood Serum

Proteome Fishing for CRISPR/Cas12a-Based Orthogonal Multiplex Aptamer Sensing

Detection of serum protein biomarkers is extremely challenging owing to the superior complexity of serum. Here, we report a method of proteome fishing from the serum. It uses a magnetic nanoparticle-protein corona and a multiplexed aptamer panel, which we incubated with the nanoparticle-protein corona for biomarker recognition. To transfer protein biomarker detection to aptamer detection, we established a CRISPR/Cas12a-based orthogonal multiplex aptamer sensing (COMPASS) platform by profiling the aptamers of protein corona with clinical nonsmall cell lung cancer (NSCLC) serum samples. Furthermore, we determined the four out of nine (FOON) panel (including HE4, NSE, AFP, and VEGF165) to be the most cost-effective and accurate panel for COMPASS in NSCLC diagnosis. The diagnostic accuracy of NSCLC by the FOON panel with internal and external cohorts was 95.56% (ROC-AUC = 99.40%) and 89.58% (ROC-AUC = 95.41%), respectively. Our developed COMPASS technology circumvents the otherwise challenging multiplexed serum protein amplification problem and avoids aptamer degradation in serum. Therefore, this novel COMPASS could lead to the development of a facile, cost-effective, intelligent, and high-throughput diagnostic platform for large-cohort cancer screening.

Unexpected enrichment of DNA aptamers for Zn2+ ions from an insulin selection

We serendipitously discovered Zn2+-binding DNA aptamers when selecting insulin aptamers. The Zn-1 aptamer binds to Zn2+ with a dissociation constant (Kd) of ∼1 μM, and has 450-fold higher selectivity for Zn2+ over Cd2+. A strand-displacement based fluorescent sensor achieved a limit of detection of 0.2 μM Zn2+.

Nanopore Identification of L-, D-Lactic Acids, D-Glucose and Gluconic Acid in the Serum of Human and Animals

DL-Lactic acid and D-glucose are important human health indicators. Their aberrant levels in body fluids may indicate a variety of human pathological conditions, suggesting an urgent need of daily monitoring. However, simultaneous and rapid analysis of DL-lactic acid and D-glucose using a sole but simple sensing system has never been reported. Here, an engineered Mycobacterium smegmatis porin A (MspA) nanopore is used to simultaneously identify DL-lactic acid and D-glucose. Highly distinguishable nanopore event features are reported. Assisted with a custom machine learning algorithm, direct identification of DL-lactic acid and D-glucose is performed with human serum, demonstrating its sensing reliability against complex and heterogeneous samples. This sensing strategy is further applied in the analysis of different animal serum samples, according to which gluconic acid is further identified. The serum samples from different animals report distinguishable levels of DL-lactic acid, D-glucose and gluconic acid, suggesting its potential applications in agricultural science and breeding industry. This sensing strategy is generally direct, rapid, economic and requires only ≈µL of input serum, suitable for point of care testing (POCT) applications.

Kinetic ITC of DNA Aptamers Binding for Small Molecules and Implications for Binding Assays and Biosensors

The determination of kon and koff values through kinetic analysis is crucial for understanding the intricacies of aptamer-target binding interactions. By employing kinetic ITC, we systematically analyzed a range of ITC data of various aptamers. Upon plotting their kon and koff values as a function of their Kd values, a notable trend emerged. Across a range of Kd values spanning from 28 nM to 864 μM, the kon value decreased from 2×105 M-1 s-1 to 96 M-1 s-1, whereas the koff value increased from 1.03×10-3 s-1 to 0.012 s-1. Thus, both kon and koff contributed to the change of Kd in the same direction, although the range of kon change was larger. Since experiments are often run at close to the Kd value, this concentration effect also played an important role in the observed binding kinetics. The effect of these kinetic parameters on two common sensing mechanisms, including aptamer beacons and strand-displacement assays, are discussed. This work has provided the kinetic values of small molecule binding aptamers and offered insights into aptamer-based biosensors.

Antidote-controlled DNA aptamer modulates human factor IXa activity

Thrombosis leads to elevated mortality rates and substantial medical expenses worldwide. Human factor IXa (HFIXa) protease is pivotal in tissue factor (TF)-mediated thrombin generation, and represents a promising target for anticoagulant therapy. We herein isolated novel DNA aptamers that specifically bind to HFIXa through systematic evolution of ligands by exponential enrichment (SELEX) method. We identified two distinct aptamers, seq 5 and seq 11, which demonstrated high binding affinity to HFIXa (Kd = 74.07 ± 2.53 nM, and 4.93 ± 0.15 nM, respectively). Computer software was used for conformational simulation and kinetic analysis of DNA aptamers and HFIXa binding. These aptamers dose-dependently prolonged activated partial thromboplastin time (aPTT) in plasma. We further rationally optimized the aptamers by truncation and site-directed mutation, and generated the truncated forms (Seq 5-1t, Seq 11-1t) and truncated-mutated forms (Seq 5-2tm, Seq 11-2tm). They also showed good anticoagulant effects. The rationally and structurally designed antidotes (seq 5-2b and seq 11-2b) were competitively bound to the DNA aptamers and effectively reversed the anticoagulant effect. This strategy provides DNA aptamer drug-antidote pair with effective anticoagulation and rapid reversal, developing advanced therapies by safe, regulatable aptamer drug-antidote pair.

Wearable Aptalyzer Integrates Microneedle and Electrochemical Sensing for In Vivo Monitoring of Glucose and Lactate in Live Animals

Continuous monitoring of clinically relevant biomarkers within the interstitial fluid (ISF) using microneedle (MN)-based assays, has the potential to transform healthcare. This study introduces the Wearable Aptalyzer, an integrated system fabricated by combining biocompatible hydrogel MN arrays for ISF extraction with an electrochemical aptamer-based biosensor for in situ monitoring of blood analytes. The use of aptamers enables continuous monitoring of a wide range of analytes, beyond what is possible with enzymatic monitoring. The Wearable Aptalyzer is used for real-time and multiplexed monitoring of glucose and lactate in ISF. Validation experiments using live mice and rat models of type 1 diabetes demonstrate strong correlation between the measurements collected from the Wearable Aptalyzer in ISF and those obtained from gold-standard techniques for blood glucose and lactate, for each analyte alone and in combination. The Wearable Aptalyzer effectively addresses the limitations inherent in enzymatic detection methods as well as solid MN biosensors and the need for reliable and multiplexed bioanalytical monitoring in vivo.

Wearable Sensing Device Integrated with Prestored Reagents for Cortisol Detection in Sweat

Wearable sweat sensors have achieved rapid development since they hold great potential in personalized health monitoring. However, a typical difficulty in practical processes is the control of working conditions for biorecognition elements, e.g., pH level and ionic strength in sweat may decrease the affinity between analytes and recognition elements. Here, we developed a wearable sensing device for cortisol detection in sweat using an aptamer as the recognition element. The device integrated functions of sweat collection, reagent prestorage, and signal conversion. Especially, the components of prestored reagents were optimized according to the inherent characteristics of sweat samples and electrodes, which allowed us to keep optimal conditions for aptamers. The sweat samples were transferred from the inlet of the device to the reagent prestored chamber, and the dry preserved reagents were rehydrated with sweat and then arrived at the aptamer-modified electrodes. Sweat samples of volunteers were analyzed by the wearable sensing device, and the results showed a good correlation with those of the ELISA kit. We believe that this convenient and reliable wearable sensing device has significant potential in self-health monitoring.

"Zero" Intrinsic Fluorescence Sensing-Platforms Enable Ultrasensitive Whole Blood Diagnosis and In Vivo Imaging

Abnormal physiological processes and diseases can lead to content or activity fluctuations of biocomponents in organelles and whole blood. However, precise monitoring of these abnormalities remains extremely challenging due to the insufficient sensitivity and accuracy of available fluorescence probes, which can be attributed to the background fluorescence arising from two sources, 1) biocomponent autofluorescence (BCAF) and 2) probe intrinsic fluorescence (PIF). To overcome these obstacles, we have re-engineered far-red to NIR II rhodol derivatives that possess weak BCAF interference. And a series of "zero" PIF sensing-platforms were created by systematically regulating the open-loop/spirocyclic forms. Leveraging these advancements, we devised various ultra-sensitive NIR indicators, achieving substantial fluorescence boosts (190 to 1300-fold). Among these indicators, 8-LAP demonstrated accurate tracking and quantifying of leucine aminopeptidase (LAP) in whole blood at various stages of tumor metastasis. Furthermore, coupling 8-LAP with an endoplasmic reticulum-targeting element enabled the detection of ERAP1 activity in HCT116 cells with p53 abnormalities. This delicate design of eliminating PIF provides insights into enhancing the sensitivity and accuracy of existing fluorescence probes toward the detection and imaging of biocomponents in abnormal physiological processes and diseases.

A Single Set of Well-Designed Aptamer Probes for Reliable On-site Qualitative and Ultra-Sensitive Quantitative Detection

Aptamer-based probes are pivotal components in various sensing strategies, owing to their exceptional specificity and versatile programmable structure. Nevertheless, numerous aptamer-based probes usually offer only a single function, limiting their capacity to meet the diverse requirements of multi-faceted sensing systems. Here, we introduced supersandwich DNA probes (SSW-DNA), designed and modified on the outer surface of nanochannels with hydrophobic inner walls, enabling dual functionality: qualitative detection for on-site analysis and quantitative detection for precise analysis. The fragmented DNAs resulting from the target recognition, are subsequently identified through lateral flow assays, enabling robust on-site qualitative detection of microcystin-LR with an impressively low limit of detection (LOD) at 0.01 μg/L. Meanwhile, the nanochannels enable highly sensitive quantification of microcystin-LR through the current analysis, achieving an exceptionally low LOD at 2.5×10-7  μg/L, with a broad dynamic range spanning from 1×10-6 to 1×102  μg/L. Furthermore, the process of target recognition introduces just a single potential error propagation, which reduces the overall risk of errors during the entire qualitative and quantitative detection process. This sensing strategy broadens the scope of applications for aptamer-based composite probes, holding promising implications across diverse fields, such as medical diagnosis, food safety, and environmental protection.

Exploring the Landscape of Aptamers: From Cross-Reactive to Selective to Specific, High-Affinity Receptors for Cocaine

We reported over 20 years ago MNS-4.1, the first DNA aptamer with a micromolar affinity for cocaine. MNS-4.1 is based on a structural motif that is very common in any random pool of oligonucleotides, and it is actually a nonspecific hydrophobic receptor with wide cross-reactivity with alkaloids and steroids. Despite such weaknesses preventing broad applications, this aptamer became widely used in proof-of-concept demonstrations of new formats of biosensors. We now report a series of progressively improved DNA aptamers recognizing cocaine, with the final optimized receptors having low nanomolar affinity and over a thousand-fold selectivity over the initial cross-reactants. In the process of optimization, we tested different methods to eliminate cross-reactivities and improve affinity, eventually achieving properties that are comparable to those of the reported monoclonal antibody candidates for the therapy of overdose. Multiple aptamers that we now report share structural motifs with the previously reported receptor for serotonin. Further mutagenesis studies revealed a palindromic, highly adaptable, broadly cross-reactive hydrophobic motif that could be rebuilt through mutagenesis, expansion of linker regions, and selections into receptors with exceptional affinities and varying specificities.

BODIPY-labeled aptasensor based on multi-walled carbon nanotubes as the quencher for "off-on" detection of catechin

A low-cost and simple boron-dipyrromethene (BODIPY)-labeled aptasensor (B-aptamer) was designed for rapid, sensitive and turn-on catechin detection. B-aptamer as signal indicator and recognition element initially stacked on the surface of multi-walled carbon nanotubes (MWCNTs) via π-π conjugation, resulting in efficient quenching of the fluorescence of the aptasensor. Upon addition of catechin, catechin was adsorbed to B-aptamer, thereby undergoing a conformational change to form B-aptamer/catechin complex, which prompted the release of the signaling probe from the surface of MWCNTs. Hence, the fluorescence intensity (FL) of the B-aptamer was increasing with the increase of catechin concentrations with the limit of detection (LOD) of 5 ng/mL. Furthermore, the method was used to analyze catechin in food samples with the recovery rate of 92.7-107.1 %. This method provided a proper analysis method for clinical analysis and pharmaceutical quality control.

Selective Hemin Binding by a Non-G-quadruplex Aptamer with Higher Affinity and Better Peroxidase-like Activity

Previous aptamers for porphyrins and metalloporphyrins were all guanine-rich sequences that can fold in G-quadruplex structures. Due to stacking-based binding, these aptamers can hardly tell different porphyrins apart, and they can also bind other planar molecules, hindering their practical applications. In this work, we used the capture selection method to obtain aptamers for hemin and protoporphyrin IX (PPIX). The hemin aptamer (Hem1) features two highly conserved repeating binding loops, and it cannot form a G-quadruplex, which was supported by its Mg2+ -dependent but K+ -independent hemin binding and CD spectroscopy. Isothermal titration calorimetry revealed much higher enthalpy change for the new aptamer, and the best aptamer showed a Kd of 43 nM hemin. Hem1 can also enhance the peroxidase-like activity of hemin. This work demonstrates that aptamers have alternative ways to bind porphyrins allowing selective recognition of different porphyrins.

Intramolecular aptamer switches

Aptamer switches as effective biosensing tools have become a focal point of research in engineered aptasensors. Intramolecular aptamer switches are more versatile, affordable, and simpler than classical "open-close" and strand displacement-based aptamer switches. Recently, many new aptamers with an overall hairpin structure have been reported. In this study, intramolecular aptamer switches were developed by adding new base pairs to the end of aptamers. The additional nucleotides can pair with the internal domains of the aptamer, causing a change in its conformation from the original secondary structure without a target. When a target binds to an aptamer, a marked change in the structure of the aptamer is expected. As models for testing this intramolecular aptamer switch idea, aptamers of oxytetracycline (OTC), 17β-estradiol (E2), and adenosine were employed. When the additional base pairs are too long, binding the target to the aptamer becomes more challenging. This research offers valuable insights into the development of intramolecular aptamer switches and their potential applications in biosensor design.

In Situ Electrospinning MOF-Derived Highly Dispersed α-Cobalt Confined in Nitrogen-Doped Carbon Nanofibers Nanozyme for Biomolecule Monitoring

Designing a metal-organic framework (MOF)-derived nanozyme with highly dispersed active sites and high catalytic activity as well as robust structure for colorimetric biosensing of diverse biomolecules remains a substantial challenge. Here, an MOF-derived highly dispersed and pure α-cobalt confined in a nitrogen-doped carbon nanofiber (α-Co@NCNF) nanozyme with superior glucose oxidase (GOD)- and peroxidase (POD)-like activities was constructed for colorimetric assay of multiple biomolecules. Specifically, the α-Co@NCNF nanozyme was synthesized, utilizing in situ electrospinning Co-MOFs into polyacrylonitrile nanofiber (PAN) followed by a pyrolysis process. Taking advantage of the in situ electrospinning strategy, the α-Co nanoparticles were confined in continuous porous NCNF to restrict the growth and prevent the aggregation and oxidation during the pyrolysis process. The resulting special structure considerably improved the enzyme-like performance. A series of experiments validate that the enzyme-like activity of the α-Co@NCNF nanozyme was superior to that of Co@CoO@NCNF (derivatives from Co-MOFs grown on the surface of PAN nanofiber) and nature enzymes. Furthermore, α-Co@NCNF nanozyme-based colorimetric biosensing was developed for monitoring glucose, hydrogen peroxide (H2O2), and glutathione (GSH) and the corresponding linear ranges are 0.1-50 and 50-900 μM and 5-55 and 0.1-20 μM accompanied by the corresponding low detection of 0.03, 1.66, and 0.03 μM. The proposed method for the construction of α-Co@NCNF nanozyme with dual enzyme-like properties provides a new insight for designing novel nanozymes and has prospects for application in colorimetric biosensing.

Affinity-Guided Coevolution of Aptamers for Guanine, Xanthine, Hypoxanthine, and Adenine

The simultaneous evolution of multiple aptamers can drastically increase the speed of aptamer discovery. Most previous studies used the same concentration for different targets, leading to the dominance of the libraries by one or a few aptamers and a low success rate. To foster the best aptamers to grow independently in the sequence space, it is important to (1) use low target concentrations close to their dissociation constants and (2) stop at an early round before any sequence starts to dominate. In this study, we demonstrate this affinity-guided selection concept using the capture-SELEX method to isolate aptamers for four important purines: guanine (5 μM), xanthine (50 μM), hypoxanthine (10 μM), and adenine (10 μM). The round 9 library was split, and in round 10, the four targets were individually used to elute the binding sequences. Using thioflavin T fluorescence spectroscopy and isothermal titration calorimetry, we confirmed highly selective aptamers for xanthine, guanine, and adenine. These aptamers have Kd values below 1 μM and around 100-fold selectivity against most competing analytes, and they compare favorably with existing RNA aptamers and riboswitches. A separate selection was performed using hypoxanthine alone, and no selective aptamer was achieved, even with negative selection, explaining the lack of its aptamer in our mixed selection. This affinity-guided multiplex SELEX study offers fundamental insights into aptamer selection and provides high-quality aptamers for three important purines.

Fluorescent Probes Based on Ag NPs@N/GQDs and Molecularly Imprinted Polymer for Sensitive Detection of Noradrenaline in Bananas

Fluorescence intensity and selective recognition ability are crucial factors in determining the analytical techniques for fluorescent probes. In this study, a core-shell fluorescent material, composed of silver nanoparticles@nitrogen-doped graphene quantum dots (Ag NPs@N/GQDs), was synthesised using mango leaves as the raw material through a thermal cracking method, resulting in strong fluorescence luminescence intensity. By employing noradrenaline as a template molecule and using a surface molecular imprinting technique, a molecularly imprinted membrane (MIP) was formed on the surface of the fluorescent material, that was subsequently eluted to obtain a highly specific, fluorescent probe capable of recognising noradrenaline. The probe captured various concentrations of noradrenaline using the MIP, which decreased the fluorescence intensity. Then a method for detecting trace amounts of noradrenaline was established. This method exhibited a linear range from 0.5 -700 pM with a detection limit of 0.154 pM. The proposed method was implemented in banana samples. Satisfactory recoveries were confirmed at four different concentrations. The method presented a relative standard deviation (RSD) of less than 5.0%.

Quantitative Comparison of Capture-SELEX, GO-SELEX, and Gold-SELEX for Enrichment of Aptamers

Since 1990, numerous methods for aptamer selection have been developed, although a quantitative comparison of their sequence enrichment is lacking. In this study, we compared the enrichment factors of three library-immobilization SELEX methods (capture-SELEX, GO-SELEX, and gold-SELEX). We used a spiked library that contained multiple DNA aptamers with different affinities for adenosine. The aptamer separation efficiency was measured using qPCR, and all of the three methods showed a very low DNA release (<1%) in the presence of 100 μM adenosine. Among these, barely any DNA was released from the gold nanoparticles. Deep sequencing was used to compare the enrichment of three aptamers: Ade1301, Ade1304, and the classical aptamer. Enrichment up to 30 to 50-fold was observed only for the capture-SELEX method, whereas the other two methods showed enrichment factors below 1. By blocking the primer-binding regions of the library, GO-SELEX reached up to 14% enrichment. Finally, the enrichment of aptamers based on nonspecific release and target-induced release was discussed, and the advantages of capture-SELEX were rationalized. Taken together, these results indicate that capture-SELEX is a much more efficient method for enriching aptamers.

Capture-SELEX for Chloramphenicol Binding Aptamers for Labeled and Label-Free Fluorescence Sensing

Chloramphenicol (CAP) is a potent antibiotic. Due to its side effects, CAP is currently banned in most countries, but it is still found in many food products and in the environment. Developing aptamer-based biosensors for the detection of CAP has interested many researchers. While both RNA and DNA aptamers were previously reported for CAP, they were all obtained by immobilization of the CAP base, which omitted the two chlorine atoms. In this work, DNA aptamers were selected using the library-immobilized method and free unmodified CAP. Three families of aptamers were obtained, and the best one named CAP1 showed a dissociation constant (Kd) of 9.8 μM using isothermal titration calorimetry (ITC). A fluorescent strand-displacement sensor showed a limit of detection (LOD) of 14 μM CAP. Thioflavin T (ThT) staining allowed label-free detection of CAP with a LOD of 1 μM in buffer, 1.8 μM in Lake Ontario water, and 3.6 μM in a wastewater sample. Comparisons were made with previously reported aptamers, and ITC failed to show binding of a previously reported 80-mer aptamer. Due to the small size and well-defined secondary structures of CAP1, this aptamer will find analytical applications for environmental and food monitoring.

Cross-Binding of Four Adenosine/ATP Aptamers to Caffeine, Theophylline, and Other Methylxanthines

The classical DNA aptamer for adenosine and ATP was selected twice using ATP as the target in 1995 and 2005, respectively. In 2022, this motif appeared four more times from selections using adenosine, ATP, theophylline, and caffeine as targets, suggesting that this aptamer can also bind methylxanthines. In this work, using thioflavin T fluorescence spectroscopy, this classical DNA aptamer showed Kd values for adenosine, theophylline, and caffeine of 9.5, 101, and 131 μM, respectively, and similar Kd values were obtained using isothermal titration calorimetry. Binding to the methylxanthines was also observed for the newly selected Ade1301 aptamer but not for the Ade1304 aptamer. The RNA aptamer for ATP also had no binding to the methylxanthines. Molecular dynamics simulations were performed using the classical DNA and RNA aptamers based on their NMR structures, and the simulation results were consistent with the experimental observations, explaining the selectivity profiles. This study suggests that a broader range of target analogues need to be tested for aptamers. For the detection of adenosine and ATP, the Ade1304 aptamer is a better choice due to its better selectivity.

A Quencher-Based Blood-Autofluorescence-Suppression Strategy Enables the Quantification of Trace Analytes in Whole Blood

Precise quantification of trace components in whole blood via fluorescence is of great significance. However, the applicability of current fluorescent probes in whole blood is largely hindered by the strong blood autofluorescence. Here, we proposed a blood autofluorescence-suppressed sensing strategy to develop an activable fluorescent probe for quantification of trace analyte in whole blood. Based on inner filter effect, by screening fluorophores whose absorption overlapped with the emission of blood, a redshift BODIPY quencher with an absorption wavelength ranging from 600-700 nm was selected for its superior quenching efficiency and high brightness. Two 7-nitrobenzo[c] [1,2,5] oxadiazole ether groups were introduced onto the BODIPY skeleton for quenching its fluorescence and the response of H2 S, a gas signal molecule that can hardly be quantified because of its low concentration in whole blood. Such detection system shows a pretty low background signal and high signal-to-back ratio, the probe thus achieved the accurate quantification of endogenous H2 S in 20-fold dilution of whole blood samples, which is the first attempt of quantifying endogenous H2 S in whole blood. Moreover, this autofluorescence-suppressed sensing strategy could be expanded to other trace analytes detection in whole blood, which may accelerate the application of fluorescent probes in clinical blood test.

Sensitive and specific detection of saccharide species based on fluorescence: update from 2016

Increasing evidence supports the critical role of saccharides in various pathophysiological steps of tumor progression, where they regulate tumor proliferation, invasion, hematogenic metastasis, and angiogenesis. The identification and recognition of these saccharides provide a solid foundation for the development of targeted drug preparations, which are however not fully understood due to their complex and similar structures. In order to achieve fluorescence sensing of saccharides, extensive research has been conducted to design molecular probes and nanoparticles made of different materials. This paper aims to provide in-depth discussion of three main topics that cover the current status of the carbohydrate sensing based on the fluorescence sensing mechanism, including a phenylboronic acid-based sensing platform, non-boronic acid entities, as well as an enzyme-based sensing platform. It also highlights efforts made to understand the recognition mechanisms and improve the sensing properties of these systems. Finally, we present the challenge of achieving high selectivity and sensitivity recognition of saccharides, and suggest possible future avenues for exploration.

Surfactant-Assisted Label-Free Fluorescent Aptamer Biosensors and Binding Assays

Using DNA staining dyes such as SYBR Green I (SGI) and thioflavin T (ThT) to perform label-free detection of aptamer binding has been performed for a long time for both binding assays and biosensor development. Since these dyes are cationic, they can also adsorb to the wall of reaction vessels leading to unstable signals and even false interpretations of the results. In this work, the stability of the signal was first evaluated using ThT and the classic adenosine aptamer. In a polystyrene microplate, a drop in fluorescence was observed even when non-binding targets or water were added, whereas a more stable signal was achieved in a quartz cuvette. Equilibrating the system can also improve signal stability. In addition, a few polymers and surfactants were also screened, and 0.01% Triton X-100 was found to have the best protection effect against fluorescence signal decrease due to dye adsorption. Three aptamers for Hg²⁺, adenosine, and cortisol were tested for their sensitivity and signal stability in the absence and presence of Triton X-100. In each case, the sensitivity was similar, whereas the signal stability was better for the surfactant. This study indicates that careful control experiments need to be designed to ensure reliable results and that the reliability can be improved by using Triton X-100 and a long equilibration time.

Applications and Tuning Strategies for Transcription Factor-Based Metabolite Biosensors

Transcription factor (TF)-based biosensors are widely used for the detection of metabolites and the regulation of cellular pathways in response to metabolites. Several challenges hinder the direct application of TF-based sensors to new hosts or metabolic pathways, which often requires extensive tuning to achieve the optimal performance. These tuning strategies can involve transcriptional or translational control depending on the parameter of interest. In this review, we highlight recent strategies for engineering TF-based biosensors to obtain the desired performance and discuss additional design considerations that may influence a biosensor's performance. We also examine applications of these sensors and suggest important areas for further work to continue the advancement of small-molecule biosensors.