Comprehensive H2 O Molecules Regulation via Deep Eutectic Solvents for Ultra-Stable Zinc Metal Anode

Sieving-type Electric Double Layer with Hydrogen Bond Interlocking to Stable Zinc Metal Anode

The stability of aqueous zinc metal batteries is significantly affected by side reactions and dendrite growth on the anode interface, which primarily originate from water and anions. Herein, we introduce a multi H-bond site additive, 2, 2'-Sulfonyldiethanol (SDE), into an aqueous electrolyte to construct a sieving-type electric double layer (EDL) by hydrogen bond interlock in order to address these issues. On the one hand, SDE replaces H2O and SO4 2- anions that are adsorbed on the zinc anode surface, expelling H2O/SO4 2- from the EDL and thereby reducing the content of H2O/SO4 2- at the interface. On the other hand, when Zn2+ are de-solvated at the interface during the plating, the strong hydrogen bond interaction between SDE and H2O/SO4 2- can trap H2O/SO4 2- from the EDL, further decreasing their content at the interface. This effectively sieves them out of the zinc anode interface and inhibits the side reactions. Moreover, the unique characteristics of trapped SO4 2- anions can restrict their diffusion, thereby enhancing the transference number of Zn2+ and promoting dendrite-free deposition and growth of Zn. Consequently, utilizing an SDE/ZnSO4 electrolyte enables excellent cycling stability in Zn//Zn symmetrical cells and Zn//MnO2 full cells with lifespans exceeding 3500 h and 2500 cycles respectively.

Dual-Functional Interfacial Layer Enabled by Gating-Shielding Effects for Ultra-Stable Zn Anode

Large-scale application of low-cost, high-safety and environment-compatible aqueous Zn metal batteries (ZMBs) is hindered by Zn dendrite failure and side reactions. Herein, highly reversible ZMBs are obtained by addition of trace D-pantothenate calcium additives to engineer a dual-functional interfacial layer, which is enabled by a bioinspired gating effect for excluding competitive free water near Zn surface due to the trapping and immobilization of water by hydroxyl groups, and guiding target Zn2+ transport across interface through carboxyl groups of pantothenate anions, as well as a dynamic electrostatic shielding effect around Zn protuberances from Ca2+ cations to ensure uniform Zn2+ deposition. In consequence, interfacial side reactions are perfectly inhibited owing to reduced water molecules reaching Zn surface, and the uniform and compact deposition of Zn2+ is achieved due to promoted Zn2+ transport and deposition kinetics. The ultra-stable symmetric cells with beyond 9000 h at 0.5 mA cm-2 with 0.5 mAh cm-2 and over 5000 h at 5 mA cm-2 with 1 mAh cm-2, and an average Coulombic efficiency of 99.8% at 1 mA cm-2 with 1 mAh cm-2, are amazingly realized. The regulated-electrolyte demonstrates high compatibility with verified cathodes for stable full cells. This work opens a brand-new pathway to regulate Zn/electrolyte interface to promise reversible ZMBs.

In-Situ Solid Electrolyte Interface via Dual Reaction Strategy for Highly Reversible Zinc Anode

In situ construction of solid electrolyte interfaces (SEI) is an effective strategy to enhance the reversibility of zinc (Zn) anodes. However, in situ SEI to afford high reversibility under high current density conditions (≥20 mA cm-2) is highly desired yet extremely challenging. Herein, we propose a dual reaction strategy of spontaneous electrostatic reaction and electrochemical decomposition for the in situ construction of SEI, which is composed of organic-rich upper layer and inorganic-rich inner layer. Particularly, in situ SEI performs as "growth binder" at small current density and "orientation regulator" at high current density, which significantly suppresses side reactions and dendrite growth. The in situ SEI affords the record-breaking reversibility of Zn anode under practical conditions, Zn//Zn symmetric cells can stably cycle for over 1300 h and 400 h at current densities of 50 mA cm-2 and 100 mA cm-2, respectively, showcasing an exceptional cumulative capacity of 67.5 Ah cm-2. Furthermore, the practicality of this in situ SEI is verified in Zn//PANI pouch cells with high mass loading of 25.48 mg cm-2. This work provides a universal strategy to design advanced SEI for practical Zn-ion batteries.

Zinc Chemistries of Hybrid Electrolytes in Zinc Metal Batteries: From Solvent Structure to Interfaces

Along with the booming research on zinc metal batteries (ZMBs) in recent years, operational issues originated from inferior interfacial reversibility have become inevitable. Presently, single-component electrolytes represented by aqueous solution, "water-in-salt," solid, eutectic, ionic liquids, hydrogel, or organic solvent system are hard to undertake independently the task of guiding the practical application of ZMBs due to their specific limitations. The hybrid electrolytes modulate microscopic interaction mode between Zn2+ and other ions/molecules, integrating vantage of respective electrolyte systems. They even demonstrate original Zn2+ mobility pattern or interfacial chemistries mechanism distinct from single-component electrolytes, providing considerable opportunities for solving electromigration and interfacial problems in ZMBs. Therefore, it is urgent to comprehensively summarize the zinc chemistries principles, characteristics, and applications of various hybrid electrolytes employed in ZMBs. This review begins with elucidating the chemical bonding mode of Zn2+ and interfacial physicochemical theory, and then systematically elaborates the microscopic solvent structure, Zn2+ migration forms, physicochemical properties, and the zinc chemistries mechanisms at the anode/cathode interfaces in each type of hybrid electrolytes. Among of which, the scotoma and amelioration strategies for the current hybrid electrolytes are actively exposited, expecting to provide referenceable insights for further progress of future high-quality ZMBs.

Enabling Gradient-Structured Solid Electrolyte Interphase by a Hydrated Eutectic Electrolyte for High-Performance Zn Metal Batteries

Aqueous Zn metal batteries are attracting tremendous interest as promising energy storage systems due to their intrinsic safety and cost-effectiveness. Nevertheless, the reversibility of Zn metal anodes (ZMAs) is hindered by water-induced parasitic reactions and dendrite growth. Herein, a novel hydrated eutectic electrolyte (HEE) consisting of Zn(BF4)2·xH2O and sulfolane (SL) is developed to prevent the side reactions and achieve the outstanding cyclability of ZMAs. The strong coordination between Zn2+ and SL triggers the eutectic feature, enabling the low-temperature availability of HEEs. The restriction of BF4 - hydrolysis in the eutectic system can realize favorable compatibility between Zn(BF4)2-based electrolyte and ZMAs. Besides, the newly-established solvation structure with the participation of SL, H2O, and BF4 -, can induce in situ formation of desirable SEI with gradient structure consisting of B,O-rich species, ZnS, and ZnF2, to offer satisfactory protection toward ZMAs. Consequently, the HEE allows the Zn||Zn symmetric cell to cycle over 1650 h at 2 mA cm-2 and 1 mA h cm-2. Moreover, the Zn||NH4V4O10 full batteries can deliver a prolonged lifespan for 1000 cycles with a high capacity retention of 83.4%. This work represents a feasible approach toward the elaborate design of advanced electrolyte systems for next-generation batteries.

Entropy-Driven Hydrated Eutectic Electrolytes with Diverse Solvation Configurations for All-Temperature Zn-ion Batteries

Batteries always encounter uncontrollable failure or performance decay under extreme temperature environments, which is largely limited by the properties of electrolytes. Herein, an entropy-driven hydrated eutectic electrolyte (HEE) with diverse solvation configurations is proposed to expand the operating temperature range of Zn-ion batteries. The HEE possesses over 40 types of Zn2+ solvation structure with uniform distribution, contributing to its much higher solvation configurational entropy compared to the conventional aqueous counterpart (only 6 types). These effectively promote its anti-freezing ability under ultralow temperatures, with a high ionic conductivity of 0.42 mS cm-1 even at a low temperature of -40 °C. Moreover, the entropy-driven property can simultaneously enhance the thermal stability under a high temperature over +140 °C. Therefore, the HEE can enable full cells stably working over a wide temperature range of -40~+80 °C, performing over 1500 cycles with 100 % capacity retention at -40 °C and 1000 cycles with ~72 % capacity retention at +80 °C. This inspiring concept of entropy-driven electrolyte with quantized solvation configurational entropy value has charming potential for designing future special batteries with excellent adaptability towards extreme temperature environments.

Panthenol Additives with Multiple Coordination Sites Induce Uniform Zinc Deposition and Inhibited Side Reactions for High Performance Aqueous Zinc Metal Battery

Application of aqueous zinc metal batteries (AZMBs) in large-scale new energy systems (NESs) is challenging owing to the growth of dendrites and frequent side reactions. Here, this study proposes the use of Panthenol (PB) as an electrolyte additive in AZMBs to achieve highly reversible zinc plating/stripping processes and suppressed side reactions. The PB structure is rich in polar groups, which led to the formation of a strong hydrogen bonding network of PB-H2O, while the PB molecule also builds a multi-coordination solvated structure, which inhibits water activity and reduces side reactions. Simultaneously, PB and OTF- decomposition, in situ formation of SEI layer with stable organic-inorganic hybrid ZnF2-ZnS interphase on Zn anode electrode, can inhibit water penetration into Zn and homogenize the Zn2+ plating. The effect of the thickness of the SEI layer on the deposition of Zn ions in the battery is also investigated. Hence, this comprehensive regulation strategy contributes to a long cycle life of 2300 h for Zn//Zn cells assembled with electrolytes containing PB additives. And the assembled Zn//NH4V4O10 pouch cells with homemade modules exhibit stable cycling performance and high capacity retention. Therefore, the proposed electrolyte modification strategy provides new ideas for AZMBs and other metal batteries.

Intrinsically Decoupled Coordination Chemistries Enable Quasi-Eutectic Electrolytes with Fast Kinetics toward Enhanced Zinc-Ion Capacitors

Eutectic electrolytes show potential beyond conventional low-concentration electrolytes (LCEs) in zinc (Zn)-ion capacitors (ZICs) yet suffer from high viscosity and sluggish kinetics. Herein, we originally propose a universal theory of intrinsically decoupling to address these issues, producing a novel electrolyte termed "quasi-eutectic" electrolyte (quasi-EE). Joint experimental and theoretical analyses confirm its unique solution coordination structure doped with near-LCE domains. This enables the quasi-EE well inherit the advanced properties at deep-eutectic states while provide facilitated kinetics as well as lower energy barriers via a vehicle/hopping-hybridized charge transfer mechanism. Consequently, a homogeneous electroplating pattern with much enhanced Sand's time is achieved on the Zn surface, followed by a twofold prolonged service-life with drastically reduced concentration polarization. More encouragingly, the quasi-EE also delivers increased capacitance output in ZICs, which is elevated by 12.4 %-144.6 % compared to that before decoupling. Furthermore, the pouch cell with a cathodic mass loading of 36.6 mg cm-2 maintains competitive cycling performances over 600 cycles, far exceeding other Zn-based counterparts. This work offers fresh insights into eutectic decoupling and beyond.

Additives for Aqueous Zinc-Ion Batteries: Recent Progress, Mechanism Analysis, and Future Perspectives

Aqueous zinc-ion batteries (ZIBs) stand out as a promising next-generation electrochemical energy storage technology, offering notable advantages such as high specific capacity, enhanced safety, and cost-effectiveness. However, the application of aqueous electrolytes introduces challenges: Zn dendrite formation and parasitic reactions at the anode, as well as dissolution, electrostatic interaction, and by-product formation at the cathode. In addressing these electrode-centric problems, additive engineering has emerged as an effective strategy. This review delves into the latest advancements in electrolyte additives for ZIBs, emphasizing their role in resolving the existing issues. Key focus areas include improving morphology and reducing side reactions during battery cycling using synergistic effects of modulating anode interface regulation, zinc facet control, and restructuring of hydrogen bonds and solvation sheaths. Special attention is given to the efficacy of amino acids and zwitterions due to their multifunction to improve the cycling performance of batteries concerning cycle stability and lifespan. Additionally, the recent additive advancements are studied for low-temperature and extreme weather applications meticulously. This review concludes with a holistic look at the future of additive engineering, underscoring its critical role in advancing ZIB performance amidst the complexities and challenges of electrolyte additives.

Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate energy density and poor cycling stability due to the presence of zinc ions in the fully hydrated solvation state. Thus, designing the dehydrated solvation structure of zinc ions can effectively address the current drawbacks of aqueous Zn-metal batteries. In this case, considering the lack of studies focused on strategies for the dehydration of zinc ions, herein, we present a systematic and comprehensive review to deepen the understanding of zinc-ion solvation regulation. Two fundamental design principles of component regulation and pre-desolvation are summarized in terms of solvation environment formation and interfacial desolvation behavior. Subsequently, specific strategy based distinct principles are carefully discussed, including preparation methods, working mechanisms, analysis approaches and performance improvements. Finally, we present a general summary of the issues addressed using zinc-ion dehydration strategies, and four critical aspects to promote zinc-ion solvation regulation are presented as an outlook, involving updating (de)solvation theories, revealing interfacial evolution, enhancing analysis techniques and developing functional materials. We believe that this review will not only stimulate more creativity in optimizing aqueous electrolytes but also provide valuable insights into designing other battery systems.

Transforming Zinc-Ion Batteries with DTPA-Na: A Synergistic SEI and CEI Engineering Approach for Exceptional Cycling Stability and Self-Discharge Inhibition

Aqueous zinc-ion batteries (ZIBs) hold immense potential for large-scale energy storage, but their practical implementation faces significant challenges related to the zinc anode, including dendrite formation, corrosion, and hydrogen evolution. This study addresses these challenges by introducing diethylenetriamine pentaacetate sodium salt (DTPA-Na) as a novel electrolyte additive. DTPA-Na exhibits a unique dual functionality, enabling the formation of a robust, multi-layered solid electrolyte interphase (SEI) on the zinc anode and a stable cathode electrolyte interphase (CEI) on the MnOOH cathode. The engineered SEI effectively suppresses interfacial side reactions, facilitates uniform zinc deposition, and mitigates dendrite growth, while the CEI inhibits MnOOH dissolution and detrimental cathode side reactions. This synergistic SEI/CEI engineering approach significantly enhances ZIB performance, achieving remarkable cycling stability and self-discharge inhibition, as evidenced by the extended lifespan of Zn||Zn symmetrical cells (4400 hours at 0.5 mA/cm2) and the exceptional capacity retention of Zn||MnOOH full cells after prolonged rest (98.61 % after 720 hours).

Hybrid Molecular Sieve-Based Interfacial Layer with Physical Confinement and Desolvation Effect for Dendrite-free Zinc Metal Anodes

The side reactions and dendrite growth at the interface of Zn anodes greatly limit their practical applications in Zn metal batteries. Herein, we propose a hybrid molecular sieve-based interfacial layer (denoted as Z7M3) with a hierarchical porous structure for Zn metal anodes, which contains 70 vol % microporous ZSM-5 molecular sieves and 30 vol % mesoporous MCM-41 molecular sieves. Through comprehensive molecular dynamics simulations, we demonstrate that the mesopores (∼2.5 nm) of MCM-41 can limit the disordered diffusion of free water molecules and increase the wettability of the interfacial layer toward aqueous electrolytes. In addition, the micropores (∼0.56 nm) of ZSM-5 can optimize the Zn2+ solvation structures by reducing the bonded water molecules, which simultaneously decrease the constraint force of solvated water molecules to Zn2+ ions, thus promoting the penetrability and diffusion kinetics of Zn2+ ions in Z7M3. The synergetic effects from the hybrid molecular sieves maintain a constant Zn2+ concentration on the surface of the Zn electrode during Zn deposition, contributing to dendrite-free Zn anodes. Consequently, Z7M3-coated Zn electrodes achieved excellent cycling stability in both half and full cells.

Nonflammable Succinonitrile-Based Deep Eutectic Electrolyte for Intrinsically Safe High-Voltage Sodium-Ion Batteries

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na+ sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25 °C) and 86.3% after 100 cycles (60 °C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance.

A H2O2 Self-Charging Zinc Battery with Ultrafast Power Generation and Storage

Self-charging power systems are considered as promising alternatives for off-grid energy devices to provide sustained electricity supply. However, the conventional self-charging systems are severely restricted by the energy availability and time-consuming charging process as well as insufficient capacity. Herein, we developed an ultrafast H2O2 self-charging aqueous Zn/NaFeFe(CN)6 battery, which simultaneously integrates the H2O2 power generation and energy storage into a battery configuration. In such battery, the chemical energy conversion of H2O2 can generate electrical energy to self-charge the battery to 1.7 V through the redox reaction between H2O2 and NaFeFe(CN)6 cathode. The thermodynamically and kinetically favorable redox reaction contributes to the ultrafast H2O2 self-charging rate and the extremely short self-charging time within 60 seconds. Moreover, the rapid H2O2 power generation can promptly compensate the energy consumption of battery to provide continuous electricity supply. Impressively, this self-charging battery shows excellent scalability of device architecture and can be designed to a H2O2 single-flow battery of 7.06 Ah to extend the long-term energy supply. This work not only provides a route to design self-charging batteries with fast charging rate and high capacity, but also pushes forward the development of self-charging power systems for advanced large-scale energy storage applications.

Highly Solubilized Urea as Effective Proton Donor-Acceptors for Durable Zinc-Ion Storage Beyond Single-Anion Selection Criteria

Urea, as one of the most sustainable organic solutes, denies the high salt consumption in commercial electrolytes with its peculiar solubility in water. The bi-mixture of urea-H2O shows the eutectic feature for increased attention in aqueous Zn-ion electrochemical energy storage (AZEES) technologies. While the state-of-the-art aqueous electrolyte recipes are still pursuing the high-concentrated salt dosage with limited urea adoption and single-anion selection category. Here, a dual-anion urea-based (DAU) electrolyte composed of dual-Zn salts and urea-H2O-induced solutions is reported, contributing to a stable electric double-layer construction and in situ organic/inorganic SEI formation. The optimized ZT2S0.5-20U electrolytes show a high initial Coulombic efficiency of 93.2% and durable Zn-ion storage ≈4000 h regarding Zn//Cu and Zn//Zn stripping/plating procedures. The assembled Zn//activated carbon full cells maintain ≈100% capacitance over 50 000 cycles at 4 A g-1 in coin cell and ≈98% capacitance over 20 000 cycles at 1 A g-1 in pouch cell setups. A 12 × 12 cm2 pouch cell assembly illustrates the practicality of AZEES devices by designing the cheap, antifreezing, and nonflammable DAU electrolyte system coupling proton donor-acceptor molecule and multi-anion selection criteria, exterminating the critical technical barriers in commercialization.

Chelating Additive Regulating Zn-Ion Solvation Chemistry for Highly Efficient Aqueous Zinc-Metal Battery

Aqueous zinc-metal batteries (AZMBs) usually suffered from poor reversibility and limited lifespan because of serious water induced side-reactions, hydrogen evolution reactions (HER) and rampant zinc (Zn) dendrite growth. Reducing the content of water molecules within Zn-ion solvation sheaths can effectively suppress those inherent defects of AZMBs. In this work, we originally discovered that the two carbonyl groups of N-Acetyl-ϵ-caprolactam (N-ac) chelating ligand can serve as dual solvation sites to coordinate with Zn2+, thereby minimizing water molecules within Zn-ion solvation sheaths, and greatly inhibit water-induced side-reactions and HER. Moreover, the N-ac chelating additive can form a unique physical barrier interface on Zn surface, preventing the harmful contacting with water. In addition, the preferential adsorption of N-ac on Zn (002) facets can promote highly reversible and dendrite-free Zn2+ deposition. As a result, Zn//Cu half-cell within N-ac added electrolyte delivered ultra-high 99.89 % Coulombic efficiency during 8000 cycles. Zn//Zn symmetric cells also demonstrated unprecedented long life of more than 9800 hours (over one year). Aqueous Zn//ZnV6O16 ⋅ 8H2O (Zn//ZVO) full-cell preserved 78 % capacity even after ultra-long 2000 cycles. A more practical pouch-cell was also obtained (90.2 % capacity after 100 cycles). This method offers a promising strategy for accelerating the development of highly efficient AZMBs.

Rescuing zinc anode-electrolyte interface: mechanisms, theoretical simulations and in situ characterizations

The research interest in aqueous zinc-ion batteries (AZIBs) has been surging due to the advantages of safety, abundance, and high electrochemical performance. However, some technique issues, such as dendrites, hydrogen evolution reaction, and corrosion, severely prohibit the development of AZIBs in practical utilizations. The underlying mechanisms regarding electrochemical performance deterioration and structure degradation are too complex to understand, especially when it comes to zinc metal anode-electrolyte interface. Recently, theoretical simulations and in situ characterizations have played a crucial role in AZIBs and are exploited to guide the research on electrolyte engineering and solid electrolyte interphase. Herein, we present a comprehensive review of the current state of the fundamental mechanisms involved in the zinc plating/stripping process and underscore the importance of theoretical simulations and in situ characterizations in mechanism research. Finally, we summarize the challenges and opportunities for AZIBs in practical applications, especially as a stationary energy storage and conversion device in a smart grid.

Dynamic Molecular Interphases Regulated by Trace Dual Electrolyte Additives for Ultralong-Lifespan and Dendrite-Free Zinc Metal Anode

Metallic zinc is a promising anode material for rechargeable aqueous multivalent metal-ion batteries due to its high capacity and low cost. However, the practical use is always beset by severe dendrite growth and parasitic side reactions occurring at anode/electrolyte interface. Here we demonstrate dynamic molecular interphases caused by trace dual electrolyte additives of D-mannose and sodium lignosulfonate for ultralong-lifespan and dendrite-free zinc anode. Triggered by plating and stripping electric fields, the D-mannose and lignosulfonate species are alternately and reversibly (de-)adsorbed on Zn metal, respectively, to accelerate Zn2+ transportation for uniform Zn nucleation and deposition and inhibit side reactions for high Coulombic efficiency. As a result, Zn anode in such dual-additive electrolyte exhibits highly reversible and dendrite-free Zn stripping/plating behaviors for >6400 hours at 1 mA cm-2, which enables long-term cycling stability of Zn||ZnxMnO2 full cell for more than 2000 cycles.

Polymer Molecules Adsorption-Induced Zincophilic-Hydrophobic Protective Layer Enables Highly Stable Zn Metal Anodes

Zn metal, as one of the most promising anode materials for aqueous batteries, suffers from uncontrollable dendrite growth and water-induced parasitic reactions, which drastically compromise its cycle life and Coulombic efficiency (CE). Herein, a nonionic amphipathic additive Tween-20 (TW20) is proposed that bears both zincophilic and hydrophobic units. The zincophilic segment of TW20 preferentially adsorbs on the Zn anode, while the hydrophobic segment is exposed on the electrolyte side, forming an electrolyte-facing hydrophobic layer that shields the anode from active water molecules. Moreover, theoretical calculation and experimental results reveal that the TW20 additive can induce the preferential growth of (002) plane by adsorbing on other facets, enabling dendrite-free Zn anodes. Benefitting from these advantages, the stability and reversibility of Zn anodes are substantially improved, reflected by stable cycling for over 2500 h at 1.0 mA cm-2/1.0 mAh cm-2 and 500 h at 5 mA cm-2/5 mAh cm-2 as well as an average CE of 99.4% at 1.0 mA cm-2/1.0 mAh cm-2. The full cells paired with MnO2 demonstrate a long lifespan for more than 700 cycles at 500 mA g-1. This work is expected to provide a new approach to modulate Zn electrode interface chemistry for highly stable Zn anodes.

Electrolyte and Interphase Engineering of Aqueous Batteries Beyond "Water-in-Salt" Strategy

Aqueous batteries are promising alternatives to non-aqueous lithium-ion batteries due to their safety, environmental impact, and cost-effectiveness. However, their energy density is limited by the narrow electrochemical stability window (ESW) of water. The "Water-in-salts" (WIS) strategy is an effective method to broaden the ESW by reducing the "free water" in the electrolyte, but the drawbacks (high cost, high viscosity, poor low-temperature performance, etc.) also compromise these inherent superiorities. In this review, electrolyte and interphase engineering of aqueous batteries to overcome the drawbacks of the WIS strategy are summarized, including the developments of electrolytes, electrode-electrolyte interphases, and electrodes. First, the main challenges of aqueous batteries and the problems of the WIS strategy are comprehensively introduced. Second, the electrochemical functions of various electrolyte components (e.g., additives and solvents) are summarized and compared. Gel electrolytes are also investigated as a special form of electrolyte. Third, the formation and modification of the electrolyte-induced interphase on the electrode are discussed. Specifically, the modification and contribution of electrode materials toward improving the WIS strategy are also introduced. Finally, the challenges of aqueous batteries and the prospects of electrolyte and interphase engineering beyond the WIS strategy are outlined for the practical applications of aqueous batteries.

Critical Solvation Structures Arrested Active Molecules for Reversible Zn Electrochemistry

Aqueous Zn-ion batteries (AZIBs) have attracted increasing attention in next-generation energy storage systems due to their high safety and economic. Unfortunately, the side reactions, dendrites and hydrogen evolution effects at the zinc anode interface in aqueous electrolytes seriously hinder the application of aqueous zinc-ion batteries. Here, we report a critical solvation strategy to achieve reversible zinc electrochemistry by introducing a small polar molecule acetonitrile to form a "catcher" to arrest active molecules (bound water molecules). The stable solvation structure of [Zn(H2O)6]2+ is capable of maintaining and completely inhibiting free water molecules. When [Zn(H2O)6]2+ is partially desolvated in the Helmholtz outer layer, the separated active molecules will be arrested by the "catcher" formed by the strong hydrogen bond N-H bond, ensuring the stable desolvation of Zn2+. The Zn||Zn symmetric battery can stably cycle for 2250 h at 1 mAh cm-2, Zn||V6O13 full battery achieved a capacity retention rate of 99.2% after 10,000 cycles at 10 A g-1. This paper proposes a novel critical solvation strategy that paves the route for the construction of high-performance AZIBs.

Quantification of alkalinity of deep eutectic solvents based on (H-) and NMR

Alkaline deep eutectic solvents (DESs) have been widely employed across diverse fields. A comprehensive understanding of the alkalinity data is imperative for the comprehension of their performance. However, the current range of techniques for quantifying alkalinity is constrained. In this investigation, we formulated a series of alkaline DESs and assessed their basicity properties through a comprehensive methodology of Hammett functions alongside 1H NMR analysis. A correlation was established between the composition, structure and alkalinity of solvents. Furthermore, a strong linear correlation was observed between the Hammett basicity (H-) of solvents and initial CO2 adsorption rate. Machine learning techniques were employed to predict the significant impact of alkaline functional components on alkalinity levels and CO2 capture capacity. This study offers valuable insights into the design, synthesis and structure-function relationship of alkaline DESs.

Competitive Coordination Structure Regulation in Deep Eutectic Electrolyte for Stable Zinc Batteries

Rechargeable zinc-based batteries are finding their niche in energy storage applications where cost, safety, scalability matter, yet they are plagued by rapid performance degradation due to the lack of suitable electrolytes to stabilize Zn anode. Herein, we report a competitive coordination structure to form unique quaternary hydrated eutectic electrolyte with ligand-cation-anion cluster. Unraveled by experiment and calculation results, the competing component can enter initial primary coordination shell of Zn2+ ion, partially substituting Lewis basic eutectic ligands and reinforcing cation-anion interaction. The hydration-deficient complexes induced between competing eutectic as hydrogen bond donor-accepter and water also broaden the electrochemical window and confine free water activity. The altered coordination further leads to robust hybrid organic-inorganic enriched solid electrolyte interphase, enabling passivated surface and suppressed dendrite growth. Noticeably, stable Zn plating/stripping for 8000 cycles with high Coulombic efficiencies of 99.6 % and long cycling life of 10000 cycles for Zn-organic batteries are obtained. Even under harsh conditions (small N/P ratio, low temperature), the profits brought by the competitive eutectic electrolyte are still very prominent. This design principle leveraged by eutectic electrolytes with competitive coordination offers a new approach to improve battery performance.

Efficient Catalytic Oxidation of Ethylene at 0 °C on an in Situ Carbon Modified Pt Catalyst Supported on SBA-15

The design of efficient catalysts for catalytic ethylene (C2H4) oxidation is of crucial importance for extending the shelf life of fruits and vegetables. Herein, a carbon modified SBA-15 supported Pt catalyst (Pt/CSBA-15) was prepared in situ by a facile solid phase grinding-infiltration-inert atmosphere calcination method. Characterization results reveal that in the Pt/CSBA-15 catalysts thin carbon layers are successfully formed in the hexagonal pores of SBA-15. Additionally, Pt particles are well dispersed in the channels of SBA-15, and Pt/CSBA-15 has a smaller Pt particle size than the catalyst without carbon modification (i.e., Pt/SBA-15). O2 is more feasibly adsorbed and activated on small-sized Pt particles, and in situ formed carbon species enhance the hydrophobicity of catalysts. As a result, both 3Pt/CSBA-15 and 5Pt/CSBA-15 are able to maintain 100% conversion of 50 ppm of C2H4 for more than 7 h at 0 °C. 3Pt/CSBA-15 even achieves 81.5% C2H4 conversion and 71.6% CO2 yield after 20 h, exhibiting much more prominent catalytic performances than 3Pt/SBA-15. DFT calculations and in situ FTIR measurements confirm that small-sized Pt particles possess strong O2 affinity to promote O2 adsorption, and in situ formed hydrophobic carbon layers efficiently suppress competitive H2O adsorption. Such a unique one-step catalyst preparation method for regulating the size of metal particles and the hydrophobicity of catalysts can be perfectly utilized to develop simple and efficient hydrophobic catalysts applied in low-temperature oxidation of C2H4.

A Sustainable Dual Cross-Linked Cellulose Hydrogel Electrolyte for High-Performance Zinc-Metal Batteries

Aqueous rechargeable Zn-metal batteries (ARZBs) are considered one of the most promising candidates for grid-scale energy storage. However, their widespread commercial application is largely plagued by three major challenges: The uncontrollable Zn dendrites, notorious parasitic side reactions, and sluggish Zn2+ ion transfer. To address these issues, we design a sustainable dual cross-linked cellulose hydrogel electrolyte, which has excellent mechanical strength to inhibit dendrite formation, high Zn2+ ions binding capacity to suppress side reaction, and abundant porous structure to facilitate Zn2+ ions migration. Consequently, the Zn||Zn cell with the hydrogel electrolyte can cycle stably for more than 400 h under a high current density of 10 mA cm-2. Moreover, the hydrogel electrolyte also enables the Zn||polyaniline cell to achieve high-rate and long-term cycling performance (> 2000 cycles at 2000 mA g-1). Remarkably, the hydrogel electrolyte is easily accessible and biodegradable, making the ARZBs attractive in terms of scalability and sustainability.

Asymmetric Triple-Functional Janus Membrane for Blood Oxygenation

The oxygenation membrane, a core material of extracorporeal membrane oxygenation (ECMO), is facing challenges in balancing anti-plasma leakage, gas exchange efficiency, and hemocompatibility. Here, inspired by the asymmetric structural features of alveolus pulmonalis, a novel triple-functional membrane for blood oxygenation with a Janus architecture is proposed, which is composed of a hydrophobic polydimethylsiloxane (PDMS) layer to prevent plasma leakage, an ultrathin polyamide layer to enhance gas exchange efficiency with a CO2 :O2 permeance ratio of ≈10.7, and a hydrophilic polyzwitterionic layer to improve the hemocompatibility. During the simulated ECMO process, the Janus oxygenation membrane exhibits excellent performance in terms of thrombus formation and plasma leakage prevention, as well as adequate O2 transfer rate (17.8 mL min-1 m-2 ) and CO2 transfer rate (70.1 mL min-1 m-2 ), in comparison to the reported oxygenation membranes. This work presents novel concepts for the advancement of oxygenation membranes and demonstrates the application potential of the asymmetric triple-functional Janus oxygenation membrane in ECMO.

Trehalose in Trace Quantities as a Multifunctional Electrolyte Additive for Highly Reversible Zinc Metal Anodes

The unsatisfactory performance of Zn metal anodes significantly impedes the commercial application of aqueous zinc-ion batteries (AZIBs). Herein, we introduce a trace amount of a multifunctional trehalose additive to enhance the stability and reversibility of Zn metal anodes. The trehalose additive exhibits a stronger Zn2+ ion affinity due to abundant lone-pair electrons, disrupting hydrogen bonds in H2O, regulating solvation structures, and tuning the Zn-electrolyte interface. Consequently, the Zn metal anode demonstrates a remarkable Coulombic efficiency of 99.80% and a cycle stability exceeding 4500 h at 1 mA cm-2. Even under stringent conditions of 10 mA cm-2, the Zn metal anode maintains a cumulative capacity of 2500 mA h cm-2 without a short circuit. Furthermore, Zn//Zn symmetric batteries exhibit excellent low-temperature cycle performance (over 400 h at -10 °C). As a proof of concept, assembled Zn//NH4V4O10 and Zn//MnO2 pouch cells demonstrate an improved electrochemical performance. This work presents an electrolyte additive strategy for achieving stable zinc anode operation in AZIBs.

Ultrathin Zincophilic Interphase Regulated Electric Double Layer Enabling Highly Stable Aqueous Zinc-Ion Batteries

The practical application of aqueous zinc-ion batteries for large-grid scale systems is still hindered by uncontrolled zinc dendrite and side reactions. Regulating the electrical double layer via the electrode/electrolyte interface layer is an effective strategy to improve the stability of Zn anodes. Herein, we report an ultrathin zincophilic ZnS layer as a model regulator. At a given cycling current, the cell with Zn@ZnS electrode displays a lower potential drop over the Helmholtz layer (stern layer) and a suppressed diffuse layer, indicating the regulated charge distribution and decreased electric double layer repulsion force. Boosted zinc adsorption sites are also expected as proved by the enhanced electric double-layer capacitance. Consequently, the symmetric cell with the ZnS protection layer can stably cycle for around 3,000 h at 1 mA cm-2 with a lower overpotential of 25 mV. When coupled with an I2/AC cathode, the cell demonstrates a high rate performance of 160 mAh g-1 at 0.1 A g-1 and long cycling stability of over 10,000 cycles at 10 A g-1. The Zn||MnO2 also sustains both high capacity and long cycling stability of 130 mAh g-1 after 1,200 cycles at 0.5 A g-1.

Electrolyte Modulation Strategies for Low-Temperature Zn Batteries

Aqueous rechargeable Zn metal batteries (ARZBs) are extensively studied recently because of their low-cost, high-safety, long lifespan, and other unique merits. However, the terrible ion conductivity and insufficient interfacial redox dynamics at low temperatures restrict their extended applications under harsh environments such as polar inspections, deep sea exploration, and daily use in cold regions. Electrolyte modulation is considered to be an effective way to achieve low-temperature operation for ARZBs. In this review, first, the fundamentals of the liquid-solid transition of water at low temperatures are revealed, and an in-depth understanding of the critical factors for inferior performance at low temperatures is given. Furthermore, the electrolyte modulation strategies are categorized into anion/concentration regulation, organic co-solvent/additive introduction, anti-freezing hydrogels construction, and eutectic mixture design strategies, and emphasize the recent progress of these strategies in low-temperature Zn batteries. Finally, promising design principles for better electrolytes are recommended and future research directions about high-performance ARZBs at low temperatures are provided.

Mediating Triple Ions Migration Behavior via a Fluorinated Separator Interface toward Highly Reversible Aqueous Zn Batteries

Rampant dendrite growth, electrode passivation and severe corrosion originate from the uncontrolled ions migration behavior of Zn2+ , SO4 2- , and H+ , which are largely compromising the aqueous zinc ion batteries (AZIBs) performance. Exploring the ultimate strategy to eliminate all the Zn anode issues is challenging but urgent at present. Herein, a fluorinated separator interface (PVDF@GF) is constructed simply by grafting the polyvinylidene difluoride (PVDF) on the GF surface to realize high-performance AZIBs. Experimental and theoretical studies reveal that the strong interaction between C─F bonds in the PVDF and Zn2+ ions enables evenly redistributed Zn2+ ions concentration at the electrode interface and accelerates the Zn transportation kinetics, leading to homogeneous and fast Zn deposition. Furthermore, the electronegative separator interface can spontaneously repel the SO4 2- and anchor H+ ions to alleviate the passivation and corrosion. Accordingly, the Zn|Zn symmetric cell with PVDF@GF harvests a superior cycling stability of 500 h at 10 mAh cm-2 , and the Zn|VOX full cell delivers 76.8% capacity retention after 1000 cycles at 2 A g-1 . This work offers an all-round solution and provides new insights for the design of advanced separators with ionic sieve function toward stable and reversible Zn metal anode chemistry.

Comprehensive Understandings of Hydrogen Bond Chemistry in Aqueous Batteries

Aqueous batteries are emerging as highly promising contenders for large-scale grid energy storage because of uncomplicated assembly, exceptional safety, and cost-effectiveness. The unique aqueous electrolyte with a rich hydrogen bond (HB) environment inevitably has a significant impact on the electrode materials and electrochemical processes. While numerous reviews have focused on the materials design and assembly of aqueous batteries, the utilization of HB chemistry is overlooked. Herein, instead of merely compiling recent advancements, this review presents a comprehensive summary and analysis of the profound implication exerted by HB on all components of the aqueous batteries. Intricate links between the novel HB chemistry and various aqueous batteries are ingeniously constructed within the critical aspects, such as self-discharge, structural stability of electrode materials, pulverization, solvation structures, charge carrier diffusion, corrosion reactions, pH sensitivity, water splitting, polysulfides shuttle, and H2 S evolution. By adopting a vantage point that encompasses material design, binder and separator functionalization, electrolyte regulation, and HB optimization, a critical examination of the key factors that impede electrochemical performance in diverse aqueous batteries is conducted. Finally, insights are rendered properly based on HB chemistry, with the aim of propelling the advancement of state-of-the-art aqueous batteries.

Artificial bi-functional layers promoting Zn2+ desolvation and homogeneous deposition for reversible zinc metal anodes

Rechargeable aqueous zinc-ion hybrid supercapacitors (ZHSs) are drawing extensive attention because of their cost-effectiveness and diminished safety hazards. Nevertheless, large-scale application of ZHSs has been hindered by the severe side reactions and rampant dendrites growth on the surface of Zn metal anodes. Herein, we propose a three-dimensional organic-inorganic composite frame material as an artificial bi-functional layer coated on the zinc foil, featuring nitrogenous functional groups with zincophilicity (abbreviated as NCFM@Zn). The nitrogen (N) site's strong adsorption capacity and synergistic effect of the sub-nanopore size promote rapid desolvation of zinc ions and reduce side reactions, while also prolonging galvanized nucleation's Sand's time and allowing for even nucleation. Moreover, the uniform distribution of N on the layer results in homogeneous zinc ions flux and supports consistent zinc plating while inhibiting dendrites generation. As a result of this unique artificial bi-functional layer, symmetric Zn cells can survive 2500 h at 2.5 mA cm-2. High-areal-capacity zinc||activated carbon hybrid supercapacitors also demonstrate 20,000 cycles at high Coulombic efficiency, thus highlighting the utter convenience and potential of this strategy for modifying rechargeable metal hybrid supercapacitor surfaces.

Localized Anion-Cation Aggregated Aqueous Electrolytes with Accelerated Kinetics for Low-Temperature Zinc Metal Batteries

Aqueous zinc metal batteries hold great promise for large-scale energy storage because of their high safety, rich material resources and low cost. However, the freeze of aqueous electrolytes hinders low-temperature operation of the batteries. Here, aqueous localized anion-cation aggregated electrolytes composed of Zn(BF4 )2 as the salt and tetrahydrofuran (THF) as the diluent, are developed to improve the low-temperature performance of the Zn anode. THF promotes the inclusion of BF4 - in the solvation sheath of Zn2+ , facilitating the formation of ZnF2 -rich solid-electrolyte-interphase. THF also affects the hydrogen bonding between neighboring H2 O molecules, effectively lowering the freezing point. Therefore, the full cells of Zn||polyaniline (PANI) exhibit an ultralong cycle life of 8000 cycles with an average Coulombic efficiency of 99.99 % at -40 °C. Impressively, the pouch cells display a high capacity retention of 86.2 % after 500 cycles at -40 °C, which demonstrates the great prospect of such electrolytes in cold regions. This work provides new insights for the design of low-temperature aqueous electrolytes.

In Situ Etching of Multifunctional Three-Dimensional Interfacial Layers for the Construction of Porous Zn Anodes with Enhanced Surface Textures

Aqueous Zn-ion batteries offer the advantages of greater security and lower fabrication costs over their lithium-ion counterparts. However, their further advancement and practical application are hindered by the drastic decay in their performance due to the uncontrollable dendrite growth on Zn anodes. In this study, we fabricated a versatile three-dimensional (3D) interfacial layer (3D PVDF-Zn(TFO)2 (PVDF: poly(vinylidene fluoride); TFO: trifluoromethanesulfonate), which simultaneously formed porous Zn-metal anodes (PZn) with an enhanced (002) texture, via a in situ etching scheme. The 3D PVDF-Zn(TFO)2@PZn symmetrical cells leverage the advantages of surface coating and 3D porous architectures to yield extra-long cyclic lifetimes of over 5300 h (0.1 mA cm-2). The fabricated anodes were found to be compatible with MnO2 cathodes, and the resulting full batteries delivered an outstanding capacity of 336 mAh g-1 at 0.1 A g-1 and exhibited impressive long-term reversibility with a capacity retention of 78.7% for 2000 cycles. The proposed coating strategy is viable for developing porous structures with cutting-edge designs and for textured surface engineering.

Lithium Bis(oxalate)borate Additive for Self-repairing Zincophilic Solid Electrolyte Interphases towards Ultrahigh-rate and Ultra-stable Zinc Anodes

The artificial solid electrolyte interphase (SEI) plays a pivotal role in Zn anode stabilization but its long-term effectiveness at high rates is still challenged. Herein, to achieve superior long-life and high-rate Zn anode, an exquisite electrolyte additive, lithium bis(oxalate)borate (LiBOB), is proposed to in situ derive a highly Zn2+ -conductive SEI and to dynamically patrol its cycling-initiated defects. Profiting from the as-constructed real-time, automatic SEI repairing mechanism, the Zn anode can be cycled with distinct reversibility over 1800 h at an ultrahigh current density of 50 mA cm-2 , presenting a record-high cumulative capacity up to 45 Ah cm-2 . The superiority of the formulated electrolyte is further demonstrated in the Zn||MnO2 and Zn||NaV3 O8 full batteries, even when tested under harsh conditions (limited Zn supply (N/P≈3), 2500 cycles). This work brings inspiration for developing fast-charging Zn batteries toward grid-scale storage of renewable energy sources.

Hetero Nucleus Growth Stabilizing Zinc Anode for High-Biosecurity Zinc-Ion Batteries

Biocompatible devices are widely employed in modernized lives and medical fields in the forms of wearable and implantable devices, raising higher requirements on the battery biocompatibility, high safety, low cost, and excellent electrochemical performance, which become the evaluation criteria toward developing feasible biocompatible batteries. Herein, through conducting the battery implantation tests and leakage scene simulations on New Zealand rabbits, zinc sulfate electrolyte is proved to exhibit higher biosecurity and turns out to be one of the ideal zinc salts for biocompatible zinc-ion batteries (ZIBs). Furthermore, in order to mitigate the notorious dendrite growth and hydrogen evolution in mildly acidic electrolyte as well as improve their operating stability, Sn hetero nucleus is introduced to stabilize the zinc anode, which not only facilitates the planar zinc deposition, but also contributes to higher hydrogen evolution overpotential. Finally, a long lifetime of 1500 h for the symmetrical cell, the specific capacity of 150 mAh g-1 under 0.5 A g-1 for the Zn-MnO2 battery and 212 mAh g-1 under 5 A g-1 for the Zn-NH4V4O10 battery are obtained. This work may provide unique perspectives on biocompatible ZIBs toward the biosecurity of their cell components.

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules from the electrode/electrolyte interface and assist in forming a fluoride-rich, organic-inorganic gradient solid electrolyte interface (SEI) layer. The simultaneous sacrificial process of methanol and Zn(CF3SO3)2 results in the gradient SEI layer with an organic-rich surface (CH2OC- and C5 product) and an inorganic-rich (ZnF2) bottom, which combines the merits of fast ion diffusion and high flexibility. As a result, the methanol additive enables corrosion-free zinc stripping/plating on copper foils for 300 cycles with an average coulombic efficiency of 99.5%, a record high cumulative plating capacity of 10 A h/cm2 at 40 mA/cm2 in Zn/Zn symmetrical batteries. More importantly, at an ultralow N/P ratio of 2, the practical VO2//20 μm thick Zn plate full batteries with a high areal capacity of 4.7 mAh/cm2 stably operate for over 250 cycles, establishing their promising application for grid-scale energy storage devices. Furthermore, directly utilizing the 20 μm thick Zn for the commercial-level areal capacity (4.7 mAh/cm2) full zinc battery in our work would simplify the manufacturing process and boost the development of the commercial zinc battery for stationary storage.

A biocompatible electrolyte enables highly reversible Zn anode for zinc ion battery

Progress towards the integration of technology into living organisms requires power devices that are biocompatible and mechanically flexible. Aqueous zinc ion batteries that use hydrogel biomaterials as electrolytes have emerged as a potential solution that operates within biological constraints; however, most of these batteries feature inferior electrochemical properties. Here, we propose a biocompatible hydrogel electrolyte by utilising hyaluronic acid, which contains ample hydrophilic functional groups. The gel-based electrolyte offers excellent anti-corrosion ability for zinc anodes and regulates zinc nucleation/growth. Also, the gel electrolyte provides high battery performance, including a 99.71% Coulombic efficiency, over 5500 hours of long-term stability, improved cycle life of 250 hours under a high zinc utilization rate of 80%, and high biocompatibility. Importantly, the Zn//LiMn2O4 pouch cell exhibits 82% capacity retention after 1000 cycles at 3 C. This work presents a promising gel chemistry that controls zinc behaviour, offering great potential in biocompatible energy-related applications and beyond.

Low-cost and Non-flammable Eutectic Electrolytes for Advanced Zn-I2 Batteries

As a burgeoning electrolyte system, eutectic electrolytes based on ZnCl2 /Zn(CF3 SO3 )2 /Zn(TFSI)2 have been widely proposed in advanced Zn-I2 batteries; however, safety and cost concerns significantly limit their applications. Here, we report new-type ZnSO4 -based eutectic electrolytes that are both safe and cost-effective. Their universality is evident in various solvents of polyhydric alcohols, in which multiple -OH groups not only involve in Zn2+ solvation but also interact with water, resulting in the high stability of electrolytes. Taking propylene glycol-based hydrated eutectic electrolyte as an example, it features significant advantages in non-flammability and low price that is <1/200 cost of Zn(CF3 SO3 )2 /Zn(TFSI)2 -based eutectic electrolytes. Moreover, its effectiveness in confining the shuttle effects of I2 cathode and side reactions of Zn anodes is evidenced, resulting in Zn-I2 cells with high reversibility at 1 C and 91.4 % capacity remaining under 20 C. After scaling up to the pouch cell with a record mass loading of 33.3 mg cm-2 , super-high-capacity retention of 96.7 % is achieved after 500 cycles, which exceeds other aqueous counterparts. This work significantly broadens the eutectic electrolyte family for advanced Zn battery design.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High-Performance Zinc Anode: Principles, Strategies, and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries (ZIBs), which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety. However, the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth, hydrogen evolution, and corrosion passivation on anode side. A functionally and structurally well-designed anode current collectors (CCs) is believed as a viable solution for those problems, with a lack of summarization according to its working mechanisms. Herein, this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs, which can be divided into zincophilic modification, structural design, and steering the preferred crystal facet orientation. The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

Production of gas-releasing electrolyte-replenishing Ah-scale zinc metal pouch cells with aqueous gel electrolyte

Aqueous zinc batteries are ideal candidates for grid-scale energy storage because of their safety and low-cost aspects. However, the production of large-format aqueous Zn batteries is hindered by electrolyte consumption, hydrogen gas evolution and accumulation, and Zn dendrites growth. To circumvent these issues, here we propose an "open" pouch cell design for large-format production of aqueous Zn batteries, which can release hydrogen gas and allow the refilling of the electrolyte components consumed during cell cycling. The cell uses a gel electrolyte containing crosslinked kappa (k)-carrageenan and chitosan. It bonds water molecules and hinders their side reaction with Zn, preventing electrolyte leakage and fast evaporation. As a proof-of-concept, we report the assembly and testing of a Zn | |Zn_xV₂O₅·nH₂O multi-layer "open" pouch cell using the carrageenan/chitosan gel electrolyte, which delivers an initial discharge capacity of 0.9 Ah and 84% capacity retention after 200 cycles at 200 mA g^‒1, 370 kPa and 25 °C.

All-Round Enhancement in Zn-Ion Storage Enabled by Solvent-Guided Lewis Acid-Base Self-Assembly of Heterodiatomic Carbon Nanotubes

Designing zincophilic and stable carbon nanostructures is critical for Zn-ion storage with superior capacitive activity and durability. Here, we report solvent-guided Lewis acid-base self-assembly to customize heterodiatomic carbon nanotubes, triggered by the reaction between iron chloride and α,α'-dichloro-p-xylene. In this strategy, modulating the solvent-precursor interaction through the optimization of solvent formula stimulates differential thermodynamic solubilization, growth kinetics, and self-assembly behaviors of Lewis polymeric chains, thereby accurately tailoring carbon nanoarchitectures to evoke superior Zn-ion storage. Featured with open hollow interiors and porous tubular topologies, the solvent-optimized carbon nanotubes allow low ion-migration barriers to deeply access the built-in zincophilic sites by high-kinetics physical Zn²⁺/CF₃SO₃^- adsorption and robust chemical Zn²⁺ redox with pyridine/carbonyl motifs, which maximizes the spatial capacitive charge storage density. Thus, as-designed heterodiatomic carbon nanotube cathodes provide all-round improvement in Zn-ion storage, including a high energy density (140 W h kg^-1), a large current activity (100 A g^-1), and an exceptional long-term cyclability (100,000 cycles at 50 A g^-1). This study provides appealing insights into the solvent-mediated Lewis pair self-assembly design of nanostructured carbons toward advanced Zn-ion energy storage.

Enabling selective zinc-ion intercalation by a eutectic electrolyte for practical anodeless zinc batteries

Two major challenges hinder the advance of aqueous zinc metal batteries for sustainable stationary storage: (1) achieving predominant Zn-ion (de)intercalation at the oxide cathode by suppressing adventitious proton co-intercalation and dissolution, and (2) simultaneously overcoming Zn dendrite growth at the anode that triggers parasitic electrolyte reactions. Here, we reveal the competition between Zn²⁺ vs proton intercalation chemistry of a typical oxide cathode using ex-situ/operando techniques, and alleviate side reactions by developing a cost-effective and non-flammable hybrid eutectic electrolyte. A fully hydrated Zn²⁺ solvation structure facilitates fast charge transfer at the solid/electrolyte interface, enabling dendrite-free Zn plating/stripping with a remarkably high average coulombic efficiency of 99.8% at commercially relevant areal capacities of 4 mAh cm^-2 and function up to 1600 h at 8 mAh cm^-2. By concurrently stabilizing Zn redox at both electrodes, we achieve a new benchmark in Zn-ion battery performance of 4 mAh cm^-2 anode-free cells that retain 85% capacity over 100 cycles at 25 °C. Using this eutectic-design electrolyte, Zn | |Iodine full cells are further realized with 86% capacity retention over 2500 cycles. The approach represents a new avenue for long-duration energy storage.