Preparation and swelling behavior of macroporous poly(acrylamide-co-sodium methacrylate) superabsorbent hydrogels

Characterization, Biocompatibility and Antioxidant Activity of Hydrogels Containing Propolis Extract as an Alternative Treatment in Wound Healing

Hydrogels consist of a network of highly porous polymeric chains with the potential for use as a wound dressing. Propolis is a natural product with several biological properties including anti-inflammatory, antibacterial and antioxidant activities. This study was aimed at synthesizing and characterizing a polyacrylamide/methylcellulose hydrogel containing propolis as an active ingredient, to serve as a wound dressing alternative, for the treatment of skin lesions. The hydrogels were prepared using free radical polymerization, and were characterized using scanning electron microscopy, infrared spectroscopy, thermogravimetry, differential scanning calorimetry, swelling capacity, mechanical and rheological properties, UV-Vis spectroscopy, antioxidant activity by the DPPH, ABTS and FRAP assays and biocompatibility determined in Vero cells and J774 macrophages by the MTT assay. Hydrogels showed a porous and foliaceous structure with a well-defined network, a good ability to absorb water and aqueous solutions simulating body fluids as well as desirable mechanical properties and pseudoplastic behavior. In hydrogels containing 1.0 and 2.5% propolis, the contents of total polyphenols were 24.74 ± 1.71 mg GAE/g and 32.10 ± 1.01 mg GAE/g and those of total flavonoids 8.01 ± 0.99 mg QE/g and 13.81 ± 0.71 mg QE/g, respectively, in addition to good antioxidant activity determined with all three methods used. Therefore, hydrogels containing propolis extract, may serve as a promising alternative wound dressing for the treatment of skin lesions, due to their anti-oxidant properties, low cost and availability.

Preparation of fast-swelling porous superabsorbent hydrogels with high saline water absorbency under pressure by foaming and post surface crosslinking

Superabsorbent hydrogels have wide applications in many fields because of their unique water absorbing performance. In spite of decades of research about superabsorbent hydrogels, high water absorbency under pressure and fast-swelling are still challenging and highly desired for their applications in hygienic products and others. Here, we report preparation of fast-swelling porous starch-g-poly(acrylic acid)/poly(vinyl alcohol) superabsorbent hydrogels with high saline water absorbency under pressure by foaming and post surface crosslinking. 2,2'-Azobis(2-amidinopropane) dihydrochloride (AIBA) was used as a new porogen instead of conventional porogens like NaHCO3. Post surface crosslinking of the hydrogel was achieved using glycerol via the esterification reaction. AIBA is a better porogen than NaHCO3 regarding porosity and swelling performance of the hydrogels, and its content has great influences on structure and swelling performance of the hydrogels including water absorbency and swelling rate. Also, the surface crosslinking using glycerol can significantly enhance the saline water absorbency under pressure (2 kPa) but at the sacrifice of the swelling rate. Consequently, the hydrogels show high water absorbencies for deionized water (560 g/g), 0.9 wt% NaCl solution (58 g/g), 0.9 wt% NaCl solution under 2 kPa pressure (28 g/g) and fast-swelling (31 s to achieve a highly swelling state).

Printable Hydrogel Arrays for Portable and High-Throughput Shear-Mediated Assays

Hydrogels have been widely used to entrap biomolecules for various biocatalytic reactions. However, solute diffusion in these matrices to initiate such reactions can be a very slow process. Conventional mixing remains a challenge as it can cause irreversible distortion or fragmentation of the hydrogel itself. To overcome the diffusion-limit, a shear-stress-mediated platform named the portable vortex-fluidic device (P-VFD) is developed. P-VFD is a portable platform which consists of two main components, (i) a plasma oxazoline-coated polyvinyl chloride (POx-PVC) film with polyacrylamide and alginate (PAAm/Alg-Ca²⁺) tough hydrogel covalently bound to its surface and (ii) a reactor tube (L × D: 90 mm × 20 mm) where the aforementioned POx-PVC film could be readily inserted for reactions. Through a spotting machine, the PAAm/Alg-Ca²⁺ hydrogel can be readily printed on a POx-PVC film in an array pattern and up to 25.4 J/m² adhesion energy can be achieved. The hydrogel arrays on the film not only offer a strong matrix for entrapping biomolecules such as streptavidin-horseradish peroxidase but are also shear stress-tolerant in the reactor tube, enabling a >6-fold increase in its reaction rate after adding tetramethylbenzidine, relative to incubation. Through using the tough hydrogel and its stably bonded substrate, this portable platform effectively overcomes the diffusion-limit and achieves fast assay detection without causing appreciable hydrogel array deformation or dislocation on the substrate film.

A New Design of Poly(N-Isopropylacrylamide) Hydrogels Using Biodegradable Poly(Beta-Aminoester) Crosslinkers as Fertilizer Reservoirs for Agricultural Applications

Poly(N-isopropylacrylamide) (P(NIPAAm)) hydrogels were prepared by free-radical polymerization with biodegradable poly (β-amino ester) (PBAE) crosslinkers at 1 wt% and 3 wt% ratio, and compared with conventional N,N'-methylene bisacrylamide (MBA)-crosslinked hydrogel. The influence of the type, molecular weight, and diacrylate/amine ratio of the crosslinker on the crosslink density, compressive strength, and swelling and biodegradation behavior of the hydrogels was investigated. The hydrogels synthesized with lower molecular weight PBAE crosslinkers showed higher crosslinking degrees and compressive strength and lower swelling ratios. To reveal the controlled release behavior of the fertilizer, KNO₃ was used as the model, and its loading and release behavior from these hydrogels was also examined. The N/T5/1 sample with 1.5/1.0 diacrylate/amine molar ratio and 1 wt% PBAE ratio demonstrated the most controlled release of KNO₃ with 66.9% after 18 days in soil. In addition, the hydrogel with the porosity of 71.65% and crosslinking degree of 2.85 × 10^-5 mol cm^-3 showed a swelling ratio of 69.44 g/g, biodegradation rate of 23.9%, and compressive strength of 1.074 MPa. Thus, it can be concluded that the new designed biodegradable P(NIPAAm) hydrogels can be promising materials as nitrate fertilizer reservoirs and also for controlled fertilizer release in soil media for agricultural applications.

Lemon essential oil/vermiculite encapsulated in electrospun konjac glucomannan-grafted-poly (acrylic acid)/polyvinyl alcohol bacteriostatic pad: Sustained control release and its application in food preservation

Lemon essential oils (LEO), as natural bacteriostatic agents, show significant loss in the preparation processes of food packaging materials, therefore, an effective encapsulation of LEO is urgent for realizing the protection. In this study, LEO was absorbed by thermally stable and porous vermiculite (VML) to form LEO/VML complex, which is further coupled with konjac glucomannan-grafted-poly (acrylic acid)/polyvinyl alcohol (KGM-g-PAA/PVA) composite. KGM-g-PAA/PVA bacteriostatic water-absorbing pad was prepared via electrospinning technique, which can minimize the loss of LEO. The VML (1 g) can significantly reduce LEO loss and achieve sustained control LEO release from the pad, which follows the predominant mechanism of Fick diffusion law. The sustained control LEO release from the pad can effectively inhibit the growth of E. coli during storage, thus prolonging shelf life of chilled pork for 3 day. This study suggests that KGM-g-PAA/PVA pad may have a great potential in the field of intelligent packaging.