Chemical modification of polyethersulfone nanofiltration membranes: A review

Coke oven wastewater treatment using polymeric and ceramic membranes

This research is aimed to investigate the efficacy of membrane separation technology in treating coke oven wastewater (COW). A comparative study was conducted using three types of membranes: commercial polymeric (CP) membrane, commercial ceramic (CC) membrane, and synthesized ceramic (SC) membrane. The potential of the SC membrane in COW treatment was assessed in comparison to the CC membrane, which had a molecular weight cut-off (MWCO) of 1 Kilo-Dalton. The experiments were conducted under various trans-membrane pressure (TMP) conditions ranging from 1 to 4 bar. Additionally, the effect of the CP membrane on COW treatment was examined at TMP levels ranging from 5 to 25 bar. The research findings revealed that the SC membrane exhibited promising results in terms of permeability and flux compared to the CC membrane. Also, a significant reduction was observed in various water parameters such as TSS decreased by 89.74%, chlorides by 8.24%, nitrogen by 10%, and hardness by 22%. Moreover, the study was carried out by implementing an anti-fouling mechanism to mitigate fouling effects on membrane performance.

Zeolite Imidazolate Frameworks-8@SiO2-ZrO2 Crystal-Amorphous Hybrid Core-Shell Structure as a Building Block for Water Purification Membranes

Metal-organic frameworks (MOFs) are emerging as promising materials for water purification membranes, owing to their uniform microporous structures and chemical functionalities. Here, we report a simple procedure for depositing MOF-based nanofiltration membranes on commercial TiO2 ceramic tubular supports, completely avoiding the use of dispersants or binders. Zeolite imidazolate frameworks-8 (ZIF-8) nanocrystals were synthesized in methanol at room temperature and subsequently coated with an amorphous SiO2-ZrO2 gel to generate a dispersion of ZIF-8@SiO2-ZrO2 core-shell nanoparticles. The amorphous SiO2-ZrO2 gel served as a binding agent for the ZIF-8 nanocrystals, thus forming a defect-free continuous membrane layer. After repeating the coating twice, the active layer had a thickness of 0.96 μm, presenting a rejection rate >90% for the total organic carbon in an aquaculture effluent and in a wastewater treatment plant, while reducing the concentration of trimethoprim, here used as a target pollutant. Moreover, the oxide gel provided the MOF-based active layer with good adhesion to the support and enhanced its hydrophilicity, resulting in a membrane with excellent mechanical stability and resistance to fouling during the crossflow filtration of the real wastewater samples. These results implied the high potential of the MOF-based nanocomposite membrane for effective treatment of actual wastewater streams.

Immobilization of carbonic anhydrase on modified PES membranes for artificial lungs

The introduction of carbonic anhydrase (CA) onto an extracorporeal membrane oxygenation (ECMO) membrane can improve the permeability of carbon dioxide (CO2). However, existing CA-grafting methods have limitations, and the hemocompatibility of current substrate membranes of commercial ECMO is not satisfactory. In this study, a 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC)/N-hydroxy succinimide (NHS) activation method is adopted to graft CA with CO2-catalyzed conversion activity onto a polyethersulfone (PES) membrane, which is prepared by a phase inversion technique after in situ crosslinking polymerization of 1-vinyl-2-pyrrolidone (VP) and acrylic acid (AA) in PES solution. The characterization results reveal that CA has been grafted onto the modified PES membrane successfully and exhibits catalytic activity. The kinetic parameters of esterase activity verify that the grafted amount of active CA increases with an increase in the concentration of the CA incubation solution. The CA-grafted membrane (CA-M) can accelerate the conversion of bicarbonate to CO2 in water and blood, which demonstrates the special catalytic activity towards bicarbonate of CA. Finally, blood compatibility tests prove that the CA-M does not lead to hemolysis, shows suppressed protein adsorption and increased coagulation time, and is suitable for application in ECMO. This work demonstrates a green and efficient method for preparing bioactive materials and has practical guiding significance for subsequent pulmonary membrane research and ECMO applications.

Optimized Polymeric Membranes for Water Treatment: Fabrication, Morphology, and Performance

Conventional polymers, endowed with specific functionalities, are extensively utilized for filtering and extracting a diverse set of chemicals, notably metals, from solutions. The main structure of a polymer is an integral part for designing an efficient separating system. However, its chemical functionality further contributes to the selectivity, fabrication process, and resulting product morphology. One example would be a membrane that can be employed to selectively remove a targeted metal ion or chemical from a solution, leaving behind the useful components of the solution. Such membranes or products are highly sought after for purifying polluted water contaminated with toxic and heavy metals. An efficient water-purifying membrane must fulfill several requirements, including a specific morphology attained by the material with a specific chemical functionality and facile fabrication for integration into a purifying module Therefore, the selection of an appropriate polymer and its functionalization become crucial and determining steps. This review highlights the attempts made in functionalizing various polymers (including natural ones) or copolymers with chemical groups decisive for membranes to act as water purifiers. Among these recently developed membrane systems, some of the materials incorporating other macromolecules, e.g., MOFs, COFs, and graphene, have displayed their competence for water treatment. Furthermore, it also summarizes the self-assembly and resulting morphology of the membrane materials as critical for driving the purification mechanism. This comprehensive overview aims to provide readers with a concise and conclusive understanding of these materials for water purification, as well as elucidating further perspectives and challenges.

Recent advances in surface tailoring of thin film forward osmosis membranes: A review

The recent advancements in fabricating forward osmosis (FO) membranes have shown promising results in desalination and water treatment. Different methods have been applied to improve FO performance, such as using mixed or new draw solutions, enhancing the recovery of draw solutions, membrane modification, and developing FO-hybrid systems. However, reliable methods to address the current issues, including reverse salt flux, fouling, and antibacterial activities, are still in progress. In recent decades, surface modification has been applied to different membrane processes, including FO membranes. Introducing nanochannels, bioparticles, new monomers, and hydrophilic-based materials to the surface layer of FO membranes has significantly impacted their performance and efficiency and resulted in better control over fouling and concentration polarization (CP) in these membranes. This review critically investigates the recent developments in FO membrane processes and fabrication techniques for FO surface-layer modification. In addition, this study focuses on the latest materials and structures used for the surface modification of FO membranes. Finally, the current challenges, gaps, and suggestions for future studies in this field have been discussed in detail.

Laser-induced graphene electrodes scribed onto novel carbon black-doped polyethersulfone membranes for flexible high-performance microsupercapacitors

A facile and expandable methodology was successfully developed to fabricate laser-induced graphene from novel pristine aminated polyethersulfone (amPES) membranes. The as-prepared materials were applied as flexible electrodes for microsupercapacitors. The doping of amPES membranes with various weight percentages of carbon black (CB) microparticles was then performed to improve their energy storage performance. The lasing process allowed the formation of sulfur- and nitrogen-codoped graphene electrodes. The effect of electrolyte on the electrochemical performance of as-prepared electrodes was investigated and the specific capacitance was significantly enhanced in 0.5 M HClO₄. Remarkably, the highest areal capacitance of 47.3 mF·cm^-2 was achieved at a current density of 0.25 mA·cm^-2. This capacitance is approximately 12.3 times higher than the average value for commonly used polyimide membranes. Furthermore, the energy and power densities were as high as 9.46 µWh·cm^-2 and 0.3 mW·cm^-2 at 0.25 mA·cm^-2, respectively. The galvanostatic charge-discharge experiments confirmed the excellent performance and stability of amPES membranes during 5,000 cycles, where more than 100% of capacitance retention was achieved and the coulombic efficiency was improved up to 96.67%. Consequently, the fabricated CB-doped PES membranes offer several advantages including low carbon fingerprint, cost-effectiveness, high electrochemical performance and potential applications in wearable electronic systems.

Bandgap tuning of TiO2 by Cu nanoparticles applied in photocatalytic antifouling-coated PES membranes through PAA-plasma grafted adhesive layer

This study developed an antifouling coating for polyethersulfone (PES) membranes by tuning the bandgap of TiO₂ with Cu nanoparticles (NPs) via a polyacrylic acid (PAA)-plasma-grafted intermediate layer. Cu NPs were synthesized at different molar ratios and precipitated onto TiO₂ using the sol-gel method. The resulting Cu@TiO₂ photocatalysts were characterized using various techniques, showing reduced bandgap, particle size range of 100-200 nm, and generation of reactive free radicals under light irradiation. The 25% Cu@TiO₂ photocatalyst displayed the highest catalytic efficiency for Acid Blue 260 (AB260) degradation, achieving 73% and 96% with and without H₂O₂, respectively. Photocatalytic membranes based on this catalyst achieved an AB260 degradation efficiency of 91% and remained stable over five cycles. Additionally, sodium alginate-fouled photocatalytic membranes fully recovered water permeability after undergoing photocatalytic degradation of foulants. The modified membrane displayed a higher surface roughness due to the presence of photocatalyst particles. This study demonstrates the potential application of Cu@TiO₂/PAA/PES photocatalytic membranes for mitigating membrane fouling in practice.

Cross-linked quaternized polyethersulfone-amino crystalline nanocellulose composite membrane for enhanced phosphate removal from wastewater

Cross-linked quaternized polyethersulfone (QPES) hybrid mixed polymer membranes (MPMs) loading amino crystalline nanocellulose (ACNC) were successfully fabricated and applied for phosphate removal. The successful production of novel materials was validated by microscopic, spectral, and microanalytical methods. When compared to the native QPES membrane, the primary qualities of QPES hybrid membranes (hydrophilicity, porosity, permeability, antifouling) have been greatly improved overall. In addition, the surface zeta potential (SZP) and ion exchange capacity (IEC) measurements demonstrated the high positive surface charge densities of MPMs, which is beneficial for phosphate uptake. Phosphate adsorption by these membranes was studied at different temperatures, contact times, and initial phosphate concentrations using batch experiments, to investigate the optimal conditions for phosphate uptake. The MPMs showed excellent adsorption capacities with maximal removal capacities in the range of 68.8-87.95 %. Phosphate adsorption on MPMs was regulated primarily by the Sips isotherm model with multilayer adsorption capabilities and exhibited pseudo-second order kinetics (R² = 0.9951-0.9976). The positive ΔH° and ΔS° values are indicative of the endothermic nature of phosphate adsorption and randomness increase. The negative ΔG° value indicates the spontaneousity of phosphate adsorption. Phosphate removal effectiveness of the membranes was maintained following recovery and regeneration with NaOH.

Exploration of advanced cellulosic material for membrane filtration with outstanding antifouling property

Membranes, at times, have issues due to membrane fouling. The membrane fouling leads to performance deterioration and poses a potential to clog the membrane. Here we present experimental works carried out with emphasis on the antifouling properties, chlorine resistance, and mechanical properties of cellulose triacetate (CTA) and cellulose esters. We present that antifouling performance of cellulose esters evaluated by means of the VCG theory decreases with increasing carbon number in the substituent because of the high electron-donating nature of short aliphatic ester groups. When a long aliphatic ester group is required in terms of other properties such as resistance to chlorine, introducing it together with another substituent with an electron-donating nature such as an ethylene glycol moiety may strike a balance between antifouling and other performances.

Amphiphilic Grafted Polymers Based on Citric Acid and Aniline Used to Enhance the Antifouling and Permeability Properties of PES Membranes

Water treatment technology based on ultrafiltration (UF) faces the problem of severe membrane fouling due to its inherent hydrophobicity. The use of amphiphilic polymers that possess both hydrophobic and hydrophilic chain segments can be advantageous for the hydrophilic modification of UF membranes due to their excellent combination in the membrane matrix. In the present study, we examined a novel amphiphilic CA-g-AN material, constructed by grafting citric acid (CA) to aniline (AN), as a modified material to improve the hydrophilicity of a PES membrane. This material was more compatible with the polymer membrane matrix than a pure hydrophilic modified material. The polyethersulfone (PES) membranes modified by amphiphilic CA-g-AN demonstrated a higher water flux (290.13 L·m^-2·h^-1), which was more than eight times higher than that of the pure PES membrane. Furthermore, the flux recovery ratio (FRR) of the modified membrane could reach 83.24% and the value of the water contact angle (WCA) was 76.43°, demonstrating the enhanced hydrophilicity and antifouling ability of the modified membranes. With this study, we aimed to develop a new amphiphilic polymer to improve the antifouling property and permeability of polymer-based UF membranes to remove organic pollutants from water.

A Comparative Analysis of the Effect of Carbonaceous Nanoparticles on the Physicochemical Properties of Hybrid Polyethersulfone Ultrafiltration Membranes

Numerous studies have been previously reported on the use of nanoscale carbonaceous fillers, such as multi-walled carbon nanotubes (MWCNTs) and graphene oxide (GO), in polymeric ultrafiltration (UF) membranes; however, no insight has been clearly reported on which material provides the best enhancements in membrane performance. In this study, a comparative analysis was carried out to establish a comprehensible understanding of the physicochemical properties of hybrid polyethersulfone (PES) UF membranes incorporated with MWCNTs and GO nanoparticles at various concentrations. The hybrid membranes were prepared via the non-solvent-induced phase separation process and further characterized by field emission scanning electron microscopy and atomic force microscope (AFM). The AFM images showed homogeneous membrane surfaces with a reduction in the membrane surface roughness from 2.62 nm for bare PES to 2.39 nm for PES/MWCNTs and to 1.68 nm for PES/GO membranes due to improved hydrophilicity of the membranes. Physicochemical properties of the hybrid PES membranes were assessed, and the outcomes showed an enhancement in the porosity, pore size, water contact angle, and water permeability with respect to nanoparticle concentration. GO-incorporated PES membranes exhibited the highest porosity, pore size, and lowest contact angle as compared to PES/MWCNTs, indicating the homogeneous distribution of nanoparticles within the membrane structure. PES/MWCNTs (0.5 wt.%) and PES/GO (1.0 wt.%) hybrid membranes exhibited the highest water flux of 450.0 and 554.8 L m^-2 h^-1, respectively, at an applied operating pressure of 1 bar. The filtration and antifouling performance of the PES hybrid membranes were evaluated using 50 mg L^-1 of humic acid (HA) as a foulant at pH = 7. Compared to the bare PES membrane, the MWCNTs and GO-incorporated PES hybrid membranes exhibited enhanced permeability and HA removal. Moreover, PES/MWCNTs (0.5 wt.%) and PES/GO (1 wt.%) hybrid membranes reported HA rejection of 90.8% and 94.8%, respectively. The abundant oxygen-containing functional groups in GO-incorporated PES membranes resulted in more hydrophilic membranes, leading to enhanced permeability and fouling resistance. The antifouling properties and flux recovery ratio were improved by the addition of both nanoparticles. Given these findings, although both MWCNTs and GO nanoparticles are seen to notably improve the membrane performance, PES membranes with 1 wt.% GO loading provided the highest removal of natural organic matter, such as HA, under the same experimental conditions.

Bibliometrics of Functional Polymeric Biomaterials with Bioactive Properties Prepared by Radiation-Induced Graft Copolymerisation: A Review

Functional polymeric biomaterials (FPBMs) with bioactive characteristics obtained by radiation-induced graft copolymerisation (RIGC) have been subjected to intensive research and developed into many commercial products. Various studies have reported the development of a variety of radiation-grafted FPBMs. However, no reports dealing with the quantitative evaluations of these studies from a global bibliographic perspective have been published. Such bibliographic analysis can provide information to overcome the limitations of the databases and identify the main research trends, together with challenges and future directions. This review aims to provide an unprecedented bibliometric analysis of the published literature on the use of RIGC for the preparation of FPBMs and their applications in medical, biomedical, biotechnological, and health care fields. A total of 235 publications obtained from the Web of Science (WoS) in the period of 1985-2021 were retrieved, screened, and evaluated. The records were used to manifest the contributions to each field and underline not only the top authors, journals, citations, years of publication, and countries but also to highlight the core research topics and the hubs for research excellence on these materials. The obtained data overviews are likely to provide guides to early-career scientists and their research institutions and promote the development of new, timely needed radiation-grafted FPBMs, in addition to extending their applications.

Recent trends and challenges with the synthesis of membranes: Industrial opportunities towards environmental remediation

The industrial and agricultural revolution has posed a serious and potential threat to environment. The industrial and agricultural pollutants are directly released into the environment. This issue has clinched the scientists to work on different materials in order to decontaminate the environment. Among all other techniques, the membrane filtration technology has fascinated researchers to overcome the pollution by its promising features. This review elaborated various membrane synthesis approaches along with their mechanism of filtration, their applications towards environmental remediation such as removal of heavy metals, degradation of dyes, pharma waste, organic pollutants, as well as gas sensing applications. The membrane synthesis using different sort of materials in which inorganic, carbon materials, polymers and metal organic framework (MOFs) are highlighted. These materials have been involved in synthesis of membrane to make it more cost effective and productive to remove such hazardous materials from wastewater. Based on the reported literature, it has been found that inorganic and polymer membranes are facing issues of brittleness and swelling prior to the industrial scale applications related to the high temperature and pressure which needs to be addressed to enhance the permeation performance.

Classification of Nanomaterials and the Effect of Graphene Oxide (GO) and Recently Developed Nanoparticles on the Ultrafiltration Membrane and Their Applications: A Review

The emergence of mixed matrix membranes (MMMs) or nanocomposite membranes embedded with inorganic nanoparticles (NPs) has opened up a possibility for developing different polymeric membranes with improved physicochemical properties, mechanical properties and performance for resolving environmental and energy-effective water purification. This paper presents an overview of the effects of different hydrophilic nanomaterials, including mineral nanomaterials (e.g., silicon dioxide (SiO₂) and zeolite), metals oxide (e.g., copper oxide (CuO), zirconium dioxide (ZrO₂), zinc oxide (ZnO), antimony tin oxide (ATO), iron (III) oxide (Fe2O3) and tungsten oxide (WO_X)), two-dimensional transition (e.g., MXene), metal-organic framework (MOFs), covalent organic frameworks (COFs) and carbon-based nanomaterials (such as carbon nanotubes and graphene oxide (GO)). The influence of these nanoparticles on the surface and structural changes in the membrane is thoroughly discussed, in addition to the performance efficiency and antifouling resistance of the developed membranes. Recently, GO has shown a considerable capacity in wastewater treatment. This is due to its nanometer-sized holes, ultrathin layer and light and sturdy nature. Therefore, we discuss the effect of the addition of hydrophilic GO in neat form or hyper with other nanoparticles on the properties of different polymeric membranes. A hybrid composite of various NPs has a distinctive style and high-quality products can be designed to allow membrane technology to grow and develop. Hybrid composite NPs could be used on a large scale in the future due to their superior mechanical qualities. A summary and future prospects are offered based on the current discoveries in the field of mixed matrix membranes. This review presents the current progress of mixed matrix membranes, the challenges that affect membrane performance and recent applications for wastewater treatment systems.

A Review on Polyethersulfone Membranes in Polar Organic Chemical Integrative Samplers: Preparation, Characterization and Innovation

The membranes in polar organic chemical integrative samplers (POCIS) enclose the receiving sorbent and protect it from coming into direct contact with the environmental matrix. They have a crucial role in extending the kinetic regime of contaminant uptake, by slowing down their diffusion between the water phase and the receiving phase. The drive to improve passive sampling requires membranes with better design and enhanced performances. In this review, the preparation of standard polyethersulfone (PES) membranes for POCIS is presented, as well as methods to evaluate their composition, morphology, structure, and performance. Generally, only supplier-related morphological and structural data are provided, such as membrane type, thickness, surface area, and pore diameter. The issues related to the use of PES membranes in POCIS applications are exposed. Finally, alternative membranes to PES in POCIS are also discussed, although no better membrane has yet been developed. This review highlights the urge for more membrane characterization details and a better comprehension of the mechanisms which underlay their behavior and performance, to improve membrane selection and optimize passive sampler development.

Effect of Silica Sodalite Loading on SOD/PSF Membranes during Treatment of Phenol-Containing Wastewater

In this study, silica sodalite (SSOD) was prepared via topotactic conversion and different silica sodalite loadings were infused into the polysulfone (PSF) for application in phenol-containing water treatment. The composite membranes were fabricated through the phase inversion technique. Physicochemical characteristics of the nanoparticles and membranes were checked using a Scanning Electron Microscope (SEM), Brunauer Emmett-Teller (BET), and Fourier Transform Infrared (FTIR) for surface morphology, textural properties, and surface chemistry, respectively. A nanotensile test, Atomic Force Microscopy (AFM), and contact angle measurement were used to check the mechanical properties, surface roughness, and hydrophilicity of the membranes, respectively. SEM results revealed that the pure polysulfone surface is highly porous with large evident pores. However, the pores decreased with increasing SSOD loading. The performance of the fabricated membranes was evaluated using a dead-end filtration device at varying feed pressure during phenol-containing water treatment. The concentration of phenol in water used in this study was 20 mg/L. The pure PSF displayed the maximum phenol rejection of 95 55% at 4 bar, compared to the composite membranes having 61.35% and 64.75% phenol rejection for 5 wt.% SSOD loading and 10 wt.% SSOD loading, respectively. In this study, a novel Psf-infused SSOD membrane was successfully fabricated for the treatment of synthetic phenol-containing water to alleviate the challenges associated with it.

Doubly modified MWCNTs embedded in polyethersulfone (PES) ultrafiltration membrane and its anti-fouling performance

Multiwall carbon nanotubes (MWCNTs) are often used to modify polymer membranes as additives, however, MWCNTs are easy to agglomerate and entangle in polymer matrix due to their own strong van der Waals force. MWCNTs were doubly modified by bonding octadecylamine (ODA) and SiO2 through the respective amidation and esterification reactions to prepare SiO2-MWCNT-ODA nanocomposites. The amino groups on ODA were amidated with the carboxyl groups on MWCNT-COOH. Then the hydroxyl groups on SiO2 were bonded to MWCNT-COOH through esterification to obtain SiO2-MWCNT-ODA nanocomposites. PES/SiO2-MWCNT-ODA composite ultrafiltration (UF) membrane was prepared by non-solvent induced phase separation (NIPS) method. SiO2-MWCNT-ODA nanocomposites and PES/SiO2-MWCNT-ODA membrane were characterized by FTIR, XRD, TGA, and SEM, etc. The results showed that PES/SiO2-MWCNT-ODA membrane had significantly improved permeability, rejection, and antifouling properties for comparison with PES membrane. The pure water flux of PES/Nano.2-0.5 reached 212.5 L m−2 h−1, which was approximately 2.6 times than that of PES membrane, and the rejection of BSA protein for composite membrane was as high as 94.2%. PES/SiO2-MWCNT-ODA composite membrane had excellent antifouling performance and the flux recovery rate (FRR) of PES/Nano.2-0.5 membrane could still maintain at higher value of 84.82% after two cycles in the antifouling test.

Fabrication, characterization, and performance of poly (aryl ether nitrile) flat sheet ultrafiltration membranes with polyvinyl pyrrolidone as additives

Poly(aryl ether nitrile) (PEN) was used to fabricate ultrafiltration membrane via immersion precipitation phase inversion method. The effects of polyvinyl pyrrolidone (PVP) of different molecular weights and concentrations on the structure and performance of PEN membranes were investigated. The membranes were observed by scanning electron microscope, atomic force microscope, equilibrium water content (EWC), porosity (ε), and so on. The membranes were subjected to ultrafiltration characterizations such as pure water flux (PWF), compaction factor (CF), hydraulic permeability (P m), and bovine serum albumin (BSA) rejection rate. The hydrophilicity was characterized by infrared spectroscopy and contact angle tests. Results showed that molecular weight of PVP had significant effect on PEN membrane formation, which the membrane prepared by PVP-k30 exhibited excellent comprehensive performance. Meanwhile, the concentration of PVP-k30 could effectively control the select-permeability of PEN membrane. With PVP-k30 concentration increased from 7 to 13 wt%, the prepared PEN membranes got higher EWC, ε, CF, and P m. The PWF increased from 146.5 to 249.1 L m−2 h−1 bar−1, while the overall rejection of BSA remained above 90%. Further increasing the addition amount to 16 wt%, the membrane performance began to decline. Finally, the addition of PVP-k30 could effectively improve the hydrophilicity of prepared PEN membrane surface.

Manufacturing and Separation Characteristics of Hemodialysis Membranes to Improve Toxin Removal Rate

With the recently growing interest in health care, hemodialysis is being performed not only to treat patients with renal disease but also to improve blood circulation. At present, filters used for hemodialysis are manufactured only in certain countries, and all other countries must rely on imports. In this study, polyethersulfone (PES), which has excellent blood compatibility, was used as the main material to develop hemodialysis membranes for hemodialysis filters, and these hemodialysis membranes were prepared by adding a hydrophilic polymer, polyvinylpyrrolidone (PVP), and varying the type of nonsolvent during the manufacturing process to improve the toxin removal rate and biocompatibility. The addition of PVP was confirmed through attenuated total reflection Fourier transform infrared (ATR-FTIR), and the structure of the membranes depending on the nonsolvent was analyzed through scanning electron microscopy (SEM) and atomic force microscopy (AFM) images. The contact angle results indicated that the hydrophilicity of the membrane surface was improved as the concentration of PVP increased. The results of the toxin filtration efficiency experiment using urea, creatinine, and bovine serum albumin (BSA) confirmed removal rates of 58.8% and 56.87%, respectively, and a protein loss of less than 8%. Also, cell viability was over 90% at the PVP concentration of 2% or higher. A preliminary study was conducted on the improvement of toxin filtration efficiency and the development potential of these hemodialysis membranes with excellent biocompatibility.

Dual Optimized Sulfonated Polyethersulfone and Functionalized Multiwall Carbon Tube Based Composites High Fouling Resistance Membrane for Protein Separation

Commercial grade sulfonated-Polyethersulfone (S-PES) and functionalized multiwall carbon nanotube (f-MWCNT)/polyvinylpyrrolidone (PVP) nanocomposites (NCs) were used to enhance and optimize the antifouling, protein resistance and protein separation properties of the S-PES ultrafiltration membranes. The polarities of sulfonic groups of S-PES, carbonyl carbon of pyrrolidone, hydroxyl and carboxyl groups of f-MWCNT in the membrane composition helped to strongly bind each other through hydrogen bonding, as shown by Fourier-transform infrared spectroscopy (FTIR). These binding forces greatly reduced the leaching of NCs and developed long finger-like projection, as confirmed by elution ratio and cross-sectional studies of the membranes via field emission scanning electron microscope (FESEM). The contact angle was reduced up to 48% more than pristine PES. Atomic force microscopy (AFM) was employed to study the various parameters of surface roughness with 3d diagrams, while grain analysis of membrane surface provided a quantitative estimation about volume, area, perimeter, length, radius and diameter. The NCs/S-PES enhanced the flux rate with an impressive (80–84%) flux recovery ratio and (58–62%) reversible resistance (R_r) value in situ, with 60% and 54.4% lesser dynamic and static protein adsorption. The best performing membrane were reported to remove 31.8%, 66.3%, 83.6% and 99.9% for lysozyme-(14.6 kDa), trypsin-(20 kDa), pepsin-(34.6 kDa) and bovine serum albumin (BSA-66 kDa), respectively.

Anti-fouling and protein separation of PVDF-g-PMAA@MnO2 filtration membrane with in-situ grown MnO2 nanorods

MnO₂ nanorods with controllable scale were grown in the PVDF-g-PMAA modified membrane to form PVDF-g-PMAA@ MnO₂ membrane through the in situ redox reaction of KMnO₄ solution, which is confirmed by scanning electron microscopy (SEM) and X-ray energy-dispersion spectroscopy (EDX). The pore size of the membrane decreased with the increase of KMnO₄ solution concentration. The thermodynamic stability and the hydrophilicity of the membrane were also enhanced by the MnO₂ nanorods. The water flux, bovine serum albumin (BSA)/Lysozyme protein solution flux and rejection, flux recovery, etc. showed effective improvement of the anti-fouling performance of the PVDF-g-PMAA@ MnO₂ membrane. More importantly, it can effectively separate BSA from lysozyme, which provided a potential application in the field of biology, food, and other industrial fields for the requirement of separation and purification.

Evaluations of holey graphene oxide modified ultrafiltration membrane and the performance for water purification

Membrane technology has been widely used in the fields of drinking water treatment with the advantages of pollutants separation. However, membrane fouling has become main obstacle in further application. Graphene oxide (GO) and its functionalized derivatives are considered to be ideal membrane modification materials of membrane fouling control. However, GO coated membranes were suffered from serious flux decline which raises challenges for GO modification. In this study, porous holey graphene oxide (HGO) was synthesized by hydrothermal etched GO to modify UF membranes. Water permeability of HGO membrane was more than twice that of GO membrane at the loading of 0.08 g/m². At the optimal loading of 0.08 g/m², the rejection rate of HGO coated membrane on natural organic matter (NOM) such as bovine serum albumin (BSA), sodium alginate (SA) and humic acid (HA) was increased from 55%, 29%, 58%-85%, 72%, 92%, and the contact angle was reduced from 71° to 35° with the HGO coating amount of 0.04 g/m². Finally, the membrane fouling resistance distribution of each HGO membrane was analyzed given HA as model pollutant, and the effects of HGO on mitigating the organic fouling of Polyethersulfone (PES) membranes were discussed. The total fouling resistance decreased from 3.45 to 1.73 with HGO coating, the irreversible fouling decreased by 62.86%-95.83%. Standard blocking was dominated during filtration. It was also found that increasing the loading of HGO could delay the conversion of pore blocking to the cake layer. Overall, HGO coating has an application prospect for membrane fouling control.

H2O- and ethanol concentration-responsive polymer/gel inverse opal photonic crystal

Responsive photonic crystals have attracted much attention due to their strong capability to manipulate the propagation of light in the visible region, but it is still a big challenge to invisibility and mechanical stability. Here, the novel Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals, which have high mechanical stability and can release visible patterns after wetting with water, are discussed. The Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals are also responsive to the concentration of ethanol, and the structural color response times increase with increasing ethanol concentration. This design uses the selective infiltration, hydrogen bonding and capillary action of solvent to realize the spectral diversity of reflectance. Owing to the high polarity and hydrogen bonding ability of carboxyl groups, water molecules are adsorbed easily by the poly(acrylic acid) gel. Subsequently, the encrypted information is decrypted due to the redshift of the structural color. Because of its lower polarity and hydrogen bonding ability relative to water, ethanol can impede the absorption of solvent by gel. Therefore, the ethanol concentration can be identified based on the structural color response time. Furthermore, reliable information decryption methods make Poly(ether sulfone)/Poly(acrylic acid) inverse opal photonic crystals potentially uesful as trusted encryption devices.

Stitch and copolymerization of thin-film composite membranes to enhance hydrophilicity and organics resistance for the separation of glycerol-based wastewater

Many industries produce large amounts of glycerol-based wastewater, which always contains hazardous organic chlorides. Compared with complicated biological treatments or physical adsorption, membrane separation decreases the cost and saves energy. Strong swelling of traditional thin-film composite (TFC) membranes influence the performance in the separation of organic molecules. Here we prepared TFC membranes with an acrylamide-grafted PAN support layer to copolymerize with m-phenylenediamine (MPD) and trimesoyl chloride (TMC). The link of separative layer and support layer was created like a zipper stitching to enhance the stability and resistance for the removal of organic molecules. An aquatic grass-like layer of acrylamide enlarges the surface area and hydrophilicity with superior separation performances (15.8 LMH bar^-1 flux, 72.0% rejection of dichloropropanol (DCP) and 64.6% rejection of glycerol (Gl)). The trade-off upper bound was improved to a high level. We also established the simulations of evaporation using Aspen Plus and mathematical models of reverse osmosis to calculate the energy consumption corresponding to the recycle of glycerol-based wastewater. The experimental and theoretical results illustrate the advantages of acrylamide-grafted TFC membranes in the ap-plications to concentrate organic solutes and treat wastewater.

Pristine and Modified Porous Membranes for Zinc Slurry-Air Flow Battery

The membrane is a crucial component of Zn slurry–air flow battery since it provides ionic conductivity between the electrodes while avoiding the mixing of the two compartments. Herein, six commercial membranes (Cellophane™ 350PØØ, Zirfon^®, Fumatech^® PBI, Celgard^® 3501, 3401 and 5550) were first characterized in terms of electrolyte uptake, ion conductivity and zincate ion crossover, and tested in Zn slurry–air flow battery. The peak power density of the battery employing the membranes was found to depend on the in-situ cell resistance. Among them, the cell using Celgard^® 3501 membrane, with in-situ area resistance of 2 Ω cm² at room temperature displayed the highest peak power density (90 mW cm⁻²). However, due to the porous nature of most of these membranes, a significant crossover of zincate ions was observed. To address this issue, an ion-selective ionomer containing modified poly(phenylene oxide) (PPO) and N-spirocyclic quaternary ammonium monomer was coated on a Celgard^® 3501 membrane and crosslinked via UV irradiation (PPO-3.45 + 3501). Moreover, commercial FAA-3 solutions (FAA, Fumatech) were coated for comparison purpose. The successful impregnation of the membrane with the anion-exchange polymers was confirmed by SEM, FTIR and Hg porosimetry. The PPO-3.45 + 3501 membrane exhibited 18 times lower zincate ions crossover compared to that of the pristine membrane (5.2 × 10⁻¹³ vs. 9.2 × 10⁻¹² m² s⁻¹). With low zincate ions crossover and a peak power density of 66 mW cm⁻², the prepared membrane is a suitable candidate for rechargeable Zn slurry–air flow batteries.

Polymers and Solvents Used in Membrane Fabrication: A Review Focusing on Sustainable Membrane Development

(1) Different methods have been applied to fabricate polymeric membranes with non-solvent induced phase separation (NIPS) being one of the mostly widely used. In NIPS, a solvent or solvent blend is required to dissolve a polymer or polymer blend. N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMAc), dimethylformamide (DMF) and other petroleum-derived solvents are commonly used to dissolve some petroleum-based polymers. However, these components may have negative impacts on the environment and human health. Therefore, using greener and less toxic components is of great interest for increasing membrane fabrication sustainability. The chemical structure of membranes is not affected by the use of different solvents, polymers, or by the differences in fabrication scale. On the other hand, membrane pore structures and surface roughness can change due to differences in diffusion rates associated with different solvents/co-solvents diffusing into the non-solvent and with differences in evaporation time. (2) Therefore, in this review, solvents and polymers involved in the manufacturing process of membranes are proposed to be replaced by greener/less toxic alternatives. The methods and feasibility of scaling up green polymeric membrane manufacturing are also examined.

Synthesis and Evaluation of HSOD/PSF and SSOD/PSF Membranes for Removal of Phenol from Industrial Wastewater

Phenol is regarded as a major pollutant, as the toxicity levels are in the range of 9–25 mg/L for aquatic life and humans. This study embedded silica sodalite (SSOD) and hydroxy sodalite (HSOD) nanoparticles into polysulfone (PSF) for enhancement of its physicochemical properties for treatment of phenol-containing wastewater. The pure polysulfone membranes and sodalite-infused membranes were synthesized via phase inversion. To check the surface morphology, surface hydrophilicity, surface functionality, surface roughness and measure the mechanical properties of the membranes, characterization techniques such as Scanning Electron Microscope (SEM), contact angle measurements, Fourier Transform Infrared, Atomic Force Microscopy (AFM) nanotensile tests were used, respectively. The morphology of the composite membranes showed incorporation of the sodalite crystals decreased the membrane porosity. The results obtained showed the highest contact angle of 83.81° for pure PSF as compared to that of the composite membranes. The composite membranes with 10 wt.% HSOD/PSF and 10 wt.% SSOD/PSF showed mechanical enhancement as indicated by a 20.96% and 19.69% increase in ultimate tensile strength, respectively compared to pure PSF. The performance evaluation of the membranes was done using a dead-end filtration cell at varied feed pressure. Synthetic phenol-containing wastewater was prepared by dissolving one gram of phenol crystals in 1 L of deionized water and used in this study. Results showed higher flux for sodalite infused membranes than pure PSF for both pure and phenol-containing water. However, pure PSF showed the highest phenol rejection of 93.55% as compared to 63.65% and 64.75% achieved by 10 wt.% HSOD/PSF and 10 wt.% SSOD/PSF, respectively. The two sodalite infused membranes have shown enhanced mechanical properties and permeability during treatment of phenol in synthetic wastewater.

Frontiers of Membrane Desalination Processes for Brackish Water Treatment: A Review

Climate change, population growth, and increased industrial activities are exacerbating freshwater scarcity and leading to increased interest in desalination of saline water. Brackish water is an attractive alternative to freshwater due to its low salinity and widespread availability in many water-scarce areas. However, partial or total desalination of brackish water is essential to reach the water quality requirements for a variety of applications. Selection of appropriate technology requires knowledge and understanding of the operational principles, capabilities, and limitations of the available desalination processes. Proper combination of feedwater technology improves the energy efficiency of desalination. In this article, we focus on pressure-driven and electro-driven membrane desalination processes. We review the principles, as well as challenges and recent improvements for reverse osmosis (RO), nanofiltration (NF), electrodialysis (ED), and membrane capacitive deionization (MCDI). RO is the dominant membrane process for large-scale desalination of brackish water with higher salinity, while ED and MCDI are energy-efficient for lower salinity ranges. Selective removal of multivalent components makes NF an excellent option for water softening. Brackish water desalination with membrane processes faces a series of challenges. Membrane fouling and scaling are the common issues associated with these processes, resulting in a reduction in their water recovery and energy efficiency. To overcome such adverse effects, many efforts have been dedicated toward development of pre-treatment steps, surface modification of membranes, use of anti-scalant, and modification of operational conditions. However, the effectiveness of these approaches depends on the fouling propensity of the feed water. In addition to the fouling and scaling, each process may face other challenges depending on their state of development and maturity. This review provides recent advances in the material, architecture, and operation of these processes that can assist in the selection and design of technologies for particular applications. The active research directions to improve the performance of these processes are also identified. The review shows that technologies that are tunable and particularly efficient for partial desalination such as ED and MCDI are increasingly competitive with traditional RO processes. Development of cost-effective ion exchange membranes with high chemical and mechanical stability can further improve the economy of desalination with electro-membrane processes and advance their future applications.