Poly(DMAEMA-co-PPGMA): Dual-responsive “reversible” micelles

pH-responsive polymeric nanomaterials for the treatment of oral biofilm infections

Bacterial and fungal pathogens forming oral biofilms present significant public health challenges due to the failure of antimicrobial drugs. The ability of biofilms to lower pH levels results in dental plaque, leading to gingivitis and cavities. Nanoparticles (NPs) have attracted considerable interest for drug delivery and, thus, as a solution to biofilm-related microbial infections. A novel strategy in this regard involves using pH-responsive polymeric NPs within the acidic microenvironment of oral biofilms. The acidity of the oral biofilm microenvironment is governed by carbohydrate metabolism, accumulation of lactic acid, and extracellular DNA of extracellular polymeric substances by oral biofilm-forming microbial pathogens. This acidity also provides an opportunity to enhance antibacterial activity against biofilm cells using pH-responsive drug delivery approaches. Thus, various polymeric NPs loaded with poorly soluble drugs and responsive to the acidic pH of oral biofilms have been developed. This review focuses on various forms of such polymeric NPs loaded with drugs. The fundamental mechanisms of action of pH-responsive polymeric NPs, their cytological toxicity, and in vivo efficacy testing are thoroughly discussed.

Hydrolytic degradation and biodegradation of polylactic acid electrospun fibers

Increased use of bioplastics, such as polylactic acid (PLA), helps in reducing greenhouse gas emissions, decreases energy consumption and lowers pollution, but its degradation efficiency has much room for improvement. The degradation rate of electrospun PLA fibers of varying diameters ranging from 0.15 to 1.33 μm is measured during hydrolytic degradation under different pH from 5.5 to 10, and during aerobic biodegradation in seawater supplemented with activated sewage sludge. In hydrolytic conditions, varying PLA fiber diameter had significant influence over percentage weight loss (W%L), where faster degradation was achieved for PLA fibers with smaller diameter. W%L was greatest for PLA-5 > PLA-12 > PLA-16 > PLA-20, with average W%L at 30.7%, 27.8%, 17.2% and 14.3% respectively. While different pH environment does not have a significant influence on PLA degradation, with W%L only slightly higher for basic environments. Similarly biodegradation displayed faster degradation for small diameter fibers with PLA-5 attaining the highest degree of biodegradation at 22.8% after 90 days. Hydrolytic degradation resulted in no significant structural change, while biodegradation resulted in significant hydroxyl end capping products on the PLA surface. Scanning electron microscopy (SEM) imaging of degraded PLA fibers showed a deteriorated morphology of PLA-5 and PLA-12 fibers with increased adhesion structures and irregularly shaped fibers, while a largely unmodified morphology for PLA-16 and PLA-20.

Coconut husk-derived nanocellulose as reinforcing additives in thermal-responsive hydrogels

Nanocellulose has been widely used as a reinforcing agent for hydrogel systems, but its functions on thermal responsive hydrogels are rarely investigated. In this study, we extracted cellulose nanofibers (CNFs) from coconut biomass (coir fibers and piths, respectively) and aimed to study their effects on the material properties on a new class of thermogel (poly(PCL/PEG/PPG urethane). The CNFs extracted from fiber (FF) and piths (FP) showed different morphology and fiber lengths. FF are uniformed individual fibrous networks with a fiber length of 664 ± 416 nm, while FP display a hybrid structure consisting of individual fiber and large bundles with a relative shorter fiber length of 443 ± 184 nm. Integrating both CNFs into thermogels remained the thermal-responsive characteristics with an enhanced rheological property. The results showed that gels with FF resulted in a higher storage modulus and lower Tan δ value compared to those with FP, indicating that the CNFs with a longer length could form a more intertwined network interacting with the thermogel matrix. Furthermore, we demonstrated the improved capabilities of the nanocomposite thermogels for sustained drug delivery in vitro. This study not only value-adds lignocellulose valorization but also elevates the versatility of thermogels.

Promising Gene Delivery Properties of Polycations Based on 2-(N,N-dimethylamino)ethyl Methacrylate and Polyethylene Glycol Monomethyl Ether Methacrylate Copolymers

Cationic copolymers based on 2-(N,N-dimethylamino)ethyl methacrylate and polyethylene glycol monomethyl ether (pDMAEMA-co-PEO) with different molecular weights have been synthesized. Their physicochemical properties were studied by NMR spectroscopy, sedimentation, and potentiometric titration. According to the data of potentiometric titration for the synthesized pegylated cationic copolymers, the apparent dissociation constants were determined in the pH range from 4.5 to 8.5. The physicochemical properties of interpolyelectrolyte complexes of these polycations with circular DNA (IPEC DNA) were also studied by dynamic light scattering, electrophoretic mobility, and TEM methods. It has been established that the diameter and electrokinetic potential (ζ-potential) of interpolyelectrolyte complexes can be varied over a wide range (from 200 nm to 1.5 μm and from -25 mV to +30 mV) by changing the ratio of oppositely charged ionizable groups in pegylated cationic copolymers and DNA, as well as by regulating medium pH. The resistance of the IPEC DNA/polycation complex to the action of nucleases was studied by electrophoresis in agarose gel; the cytotoxic effect of the polymers in vitro, and the efficiency of penetration (transfection) of IPEC DNA with PDMAEMA-co-PEO-polycations into eukaryotic cells of a cell line derived from human embryonic kidneys HEK 293 in vitro.

Design and synthesis of multi-targeted nanoparticles for gene delivery to breast cancer tissues

Biocompatibility of nanoparticles is the most essential factor in their use in clinical applications. In this study, hyperbranched spermine (HS), hyperbranched spermine-polyethylene glycol-folic acid (HSPF), and hyperbranched spermine-polyethylene glycol-glucose (HSPG) were synthesized for DNA protection and gene delivery to breast cancer cells. The synthesis of HSPG and HSPF was confirmed using proton nuclear magnetic resonance (H-NMR), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) spectroscopy. The HS/DNA, HSPF/DNA, HSPG/DNA, and hyperbranched spermine-polyethylene glycol-folic acid/glucose/DNA (HSPFG/DNA) nanoparticles were prepared by combining different concentrations of HS, HSPF, and HSPG with the same amount of DNA. The ability of HS, HSPF, and HSPG to interact with DNA and protect it against plasm digestion was evaluated using agarose gel. Moreover, in vivo and in vitro biocompatibility of HSPF/DNA, HSPG/DNA, and HSPFG/DNA was investigated using MTT assay and calculating weight change and survival ratio of BALB/c mice, respectively. The results of agarose gel electrophoresis showed that HS, HSPF, and HSPG have the high ability to neutralize the negative charge of DNA and protect it against plasma degradation. The results of in vivo cytotoxicity assay revealed that the HSPF/DNA, HSPG/DNA, and HSPFG/DNA nanoparticles have good biocompatibility on female BALB/c mice. In vitro and in vivo transfection assays revealed that functionalization of the surface of HS using polyethylene glycol-folic acid (HSPF) and polyethylene glycol-glucose (HSPG) significantly increases gene delivery efficiency in vitro and in vivo. These results also showed that gene transfer using both HSPF and HSPG copolymers increases gene transfer efficiency compared to when only one of them is used. The HSPFG/DNA nanoparticles have a high potential for use in therapeutic applications because of their excellent biocompatibility and high gene transfer efficiency to breast cancer tissue.

A non-invasive smart scaffold for bone repair and monitoring

Existing strategies for bone defect repair are difficult to monitor. Smart scaffold materials that can quantify the efficiency of new bone formation are important for bone regeneration and monitoring. Carbon nanotubes (CNT) have promising bioactivity and electrical conductivity. In this study, a noninvasive and intelligent monitoring scaffold was prepared for bone regeneration and monitoring by integrating carboxylated CNT into chemically cross-linked carboxymethyl chitosan hydrogel. CNT scaffold (0.5% w/v) demonstrated improved mechanical properties with good biocompatibility and electrochemical responsiveness. Cyclic voltammetry and electrochemical impedance spectroscopy of CNT scaffold responded sensitively to seed cell differentiation degree in both cellular and animal levels. Interestingly, the CNT scaffold could make up the easy deactivation shortfall of bone morphogenetic protein 2 by sustainably enhancing stem cell osteogenic differentiation and new bone tissue formation through CNT roles. This research provides new ideas for the development of noninvasive and electrochemically responsive bioactive scaffolds, marking an important step in the development of intelligent tissue engineering.

•

Existing strategies for bone defect repair are difficult to monitor.

•

In this study, a noninvasive and intelligent monitoring scaffold was prepared for bone regeneration and monitoring.

•

This scaffold was a combination of CNT integrated into a chemically cross-linked carboxymethyl chitosan hydrogel.

•

CNT scaffold showed improved mechanical properties with biocompatibility and electrochemical responsiveness.

A bio-functional polymer that prevents retinal scarring through modulation of NRF2 signalling pathway

One common cause of vision loss after retinal detachment surgery is the formation of proliferative and contractile fibrocellular membranes. This aberrant wound healing process is mediated by epithelial-mesenchymal transition (EMT) and hyper-proliferation of retinal pigment epithelial (RPE) cells. Current treatment relies primarily on surgical removal of these membranes. Here, we demonstrate that a bio-functional polymer by itself is able to prevent retinal scarring in an experimental rabbit model of proliferative vitreoretinopathy. This is mediated primarily via clathrin-dependent internalisation of polymeric micelles, downstream suppression of canonical EMT transcription factors, reduction of RPE cell hyper-proliferation and migration. Nuclear factor erythroid 2-related factor 2 signalling pathway was identified in a genome-wide transcriptomic profiling as a key sensor and effector. This study highlights the potential of using synthetic bio-functional polymer to modulate RPE cellular behaviour and offers a potential therapy for retinal scarring prevention.

Synthesis and Micellization of Bottlebrush Poloxamers

Bottlebrush polymers are characterized by an expansive parameter space, including graft length and spacing along the backbone, and these features impact various structural and physical properties such as molecular diffusion and bulk viscosity. In this work, we report a synthetic strategy for making grafted block polymers with poly(propylene oxide) and poly(ethylene oxide) side chains, bottlebrush analogues of poloxamers. Combined anionic and sequential ring-opening metathesis polymerization yielded low dispersity polymers, at full conversion of the macromonomers, with control over graft length, graft end-groups, and overall molecular weight. A set of bottlebrush poloxamers (BBPs), with identical graft lengths and composition, was synthesized over a range of molecular weights. Dynamic light scattering and transmission electron microscopy were used to characterize micelle formation in aqueous buffer. The critical micelle concentration scales exponentially with overall molecular weight for both linear and bottlebrush poloxamers; however, the bottlebrush architecture shifts micelle formation to a much higher concentration at a comparable molecular weight. Consequently, BBPs can exist in solution as unimers at significantly higher molecular weights and concentrations than the linear analogues.

Cationic Lignin-Based Hyperbranched Polymers to Circumvent Drug Resistance in Pseudomonas Keratitis

The rise of antimicrobial-resistant bacteria strains has been a global public health concern due to their ability to cause increased patient morbidity and a greater burden on the healthcare system. As one of the potential solutions to overcome such bacterial infections, hyperbranched copolymers with cationic charges were developed. These copolymers were assessed for their antimicrobial efficacy and their bactericidal mechanisms. They were found to be potent against mobile colistin-resistant 1 strains, which was significant as colistin is known to be the last-resort antibiotic against Gram-negative bacteria. Furthermore, there was no sign of mutational resistance developed by E. Coli ATCC 25922 and MCR 1+ E. Coli against the copolymer even up to 20 passages. The ability to evade inducing resistance would provide invaluable insights for future antibiotic development. Our studies suggest that the bactericidal efficacy comes from the ability to target the outer membrane efficaciously. In vivo study using a Pseudomonas keratitis model showed that the copolymer was compatible with the eye and further supported that the copolymer treatment was effective for complete bacteria elimination.

Biomaterials by design: Harnessing data for future development

Biomaterials is an interdisciplinary field of research to achieve desired biological responses from new materials, regardless of material type. There have been many exciting innovations in this discipline, but commercialization suffers from a lengthy discovery to product pipeline, with many failures along the way. Success can be greatly accelerated by harnessing machine learning techniques to comb through large amounts of data. There are many potential benefits of moving from an unstructured empirical approach to a development strategy that is entrenched in data. Here, we discuss the recent work on the use of machine learning in the discovery and design of biomaterials, including new polymeric, metallic, ceramics, and nanomaterials, and how machine learning can interface with emerging use cases of 3D printing. We discuss the steps for closer integration of machine learning to make this exciting possibility a reality.

Supramolecular thermogels from branched PCL-containing polyurethanes

Thermogels are temperature-responsive hydrogels which are most commonly formed by supramolecular self-assembly of polymer amphiphiles comprising of both hydrophobic and hydrophilic segments. Although polyurethane thermogels have shown great promise as biomaterials, their synthesis by step-growth polymerisation of diols and diisocyanates can also result in formation of allophanate branches, which arise from the reaction between free isocyanate groups and urethane linkages along the polymer backbone. In this paper, we investigate the effects of different synthetic conditions on the degree of allophanate branching on polyurethane amphiphiles, and explore the influences of these branches on the polymers' critical micelle concentration (CMC), thermodynamics of micellization and subsequent thermogel properties. Our findings offer new insights into the relationship between polymer structure, micelle and gel properties. These results highlight the importance of taking polymer branching into account for understanding the hierarchical self-assembly of polymer amphiphiles and the resulting thermogel properties and behaviour.

Polymer branching exerts notable influence on the spontaneous temperature-triggered self-assembly of amphiphilic polymers into micelles and thermogels in water.

Synthesis of double-responsive magnetic latex particles via seeded emulsion polymerization using macroRAFT block copolymers as stabilizers

We report the synthesis of magnetic latex particles decorated with double-responsive PDMAEMA segments with fast magnetic response via RAFT-assisted emulsion polymerization, highlighting this strategy as a powerful tool for magnetic carriers design.

Microwrinkled pH-sensitive hydrogel films and their role on the cell adhesion/proliferation

In this work, hydrogels based on HEMA and DMAEMA (pH-sensitive monomer) were used to form biocompatible films which present microwrinkled patterns in their surface, with the focus of exploring the role of chemical composition on cell adhesion and proliferation. Three different pH (5.4, 7.4, and 8.3) were employed to prepare these hydrogels. The pre-polymerized hydrogel mixtures were deposited via spin coating, then exposed to vacuum for deswelling the films and finally, to UV-light to spontaneously generate the wrinkled pattern. By following this procedure, is possible to form a thin rigid layer on the top of the soft and incompletely polymerized hydrogel film which generates, in turn, a wrinkled pattern due to strain mismatch in the interface. FE-SEM and AFM micrographs allowed us to characterize the wrinkled pattern dimensions. The results evidenced that chemical composition is directly related to the surface pattern morphologies obtained, not so in the case of pH variation, which does not generate relevant changes in the pattern morphology. Interestingly, these pH variations resulted in significant alterations on the interface-cell interactions. More precisely, a premyoblastic cell monolayer was cultured over the wrinkled pattern, showing an optimal cell proliferation at neutral pH. Also, the variation of DMAEMA amount on the monomer feed composition employed for the preparation of the wrinkle surfaces revealed that a certain amount is required to favor cell attachment and growth.

Amphiphilic prodrug-decorated graphene oxide as a multi-functional drug delivery system for efficient cancer therapy

Graphene oxide (GO) has shown great potential in drug delivery. However, the aqueous stability, non-specific drug release and slow release rate are major problems of the GO-based drug delivery system. Herein, we for the first time integrate the dispersant, stabilizing agent and active targeting carrier into a novel drug delivery system based on GO/PP-SS-DOX nanohybrids. The redox-sensitive PP-SS-DOX prodrug was obtained by conjugating mPEG-PLGA (PP) with doxorubicin (DOX) via disulfide bond. PEG-FA provided active targeting property for the constructed drug delivery system, GO/PP-SS-DOX/PEG-FA. In this demonstrated system, PP-SS-DOX markedly increases the stability in physiological solutions of GO and guarantees the DOX release in the reductive environment (cancerous cells). And PEG-FA helps target to cancerous tissues and induces FR-mediated endocytosis. In vitro drug release exhibited the obvious reductive sensitivity and the cumulative release amount was up to 90%, while 40% in previous reports within 72 h. The in vitro cytotoxicity of targeting nanohybrids was significantly cytotoxic than that of non-targeting nanohybrids. In vivo results displayed that the as-prepared targeting nanohybrids showed efficacious antitumor effect while it had nearly no systemic adverse toxicity on B16 tumor-bearing mice. Therefore, the in vitro and in vivo results indicate that our constructed GO/PP-SS-DOX/PEG-FA drug delivery system is a promising carrier in cancer therapy.

Supramolecular assemblies of alkane functionalized polyethylene glycol copolymers for drug delivery

Surfactants are commonly used drug carriers, however, there is a lack of understanding regarding the relationship between drug loading, drug release kinetics, and cell internalization with the physicochemical properties of the drug carriers, preventing rational design. The effects of altering hydrophobic and hydrophilic chain lengths on a poly[poly-(oxyethylene)-oxy-5-hydroxyisophthaloyl] (Ppeg) platform for delivering hydrophobic drugs was examined. The synthesized polymers were characterized by nuclear magnetic resonance spectroscopy (NMR), dynamic light scattering (DLS), and zeta potential. The resulting polymer particles were able to form micelles in aqueous solution and encapsulate pyrene, a highly hydrophobic model drug, with a loading capacity up to 8wt%, corresponding to a 50% loading efficiency. The ability to sustain drug release from these micelles over several days was also observed. RAW 264.7 macrophage uptake of the micelles was measured quantitatively and was found to be substantially higher than internalization of the unencapsulated drug. The loading capacity of the drug in the various micelles did not correlate with the internalization of the particles into the cells. Factorial analysis was used to develop predictive equations for drug loading, drug release kinetics, and cell internalization. These models were validated with newly synthesized compounds.

A review of recent progress in drug and protein encapsulation: Approaches, applications and challenges

Many drugs and proteins formulated for treatment of various diseases are not fully utilised due to environmentally problems such as degradation by enzymes or it being hydrophobic. To counter this problem, the drug and protein of interest are encapsulated by synthetic polymers where they are protected from the environment. This allows the molecule to reach its target safely and maximise its function. In this paper, we will discuss about the different techniques of encapsulation that includes emulsion evaporation, self-emulsifying drug delivery system and supercritical fluid. This will be followed by the drugs and proteins that are commonly encapsulated to counter life-threatening diseases such as cancer and diabetes. A novel method using foam was proposed and will be briefly discussed as it can play a huge role in future developments.

Nano-Star-Shaped Polymers for Drug Delivery Applications

With the advancement of polymer engineering, complex star-shaped polymer architectures can be synthesized with ease, bringing about a host of unique properties and applications. The polymer arms can be functionalized with different chemical groups to fine-tune the response behavior or be endowed with targeting ligands or stimuli responsive moieties to control its physicochemical behavior and self-organization in solution. Rheological properties of these solutions can be modulated, which also facilitates the control of the diffusion of the drug from these star-based nanocarriers. However, these star-shaped polymers designed for drug delivery are still in a very early stage of development. Due to the sheer diversity of macromolecules that can take on the star architectures and the various combinations of functional groups that can be cross-linked together, there remain many structure-property relationships which have yet to be fully established. This review aims to provide an introductory perspective on the basic synthetic methods of star-shaped polymers, the properties which can be controlled by the unique architecture, and also recent advances in drug delivery applications related to these star candidates.

Overcoming STC2 mediated drug resistance through drug and gene co-delivery by PHB-PDMAEMA cationic polyester in liver cancer cells

Stanniocalcin 2 (STC2) overexpression in hepatocellular carcinoma (HCC) could lead to poor prognosis, which might be due to its induced P-glycoprotein and Bcl-2 protein expression level increase. P-glycoprotein or membrane pump induced drug efflux and altered prosurvival Bcl-2 expression are key mechanisms for drug resistance leading to failure of chemotherapy in HCC. However, current strategy to overcome both P-glycoprotein and Bcl-2 protein induced drug resistance was rarely reported. In this work, we utilized an amphiphilic poly[(R)-3-hydroxybutyrate] (PHB)-b-poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) cationic polyester to encapsulate chemotherapeutic paclitaxel (PTX) in hydrophobic PHB domain and Bcl-2 convertor Nur77/ΔDBD gene (Nur77 without DNA binding domain for mitochondria localization) by formation of polyplex due to cationic PDMAEMA segment, to effectively inhibit the drug resistant HepG2/STC2 and SMCC7721/STC2 liver cancer cell growth. Thanks to the cationic nanoparticle complex formation ability and high transfection efficiency to express Bcl-2 conversion proteins, PHB-PDMAEMA/PTX@polyplex could partially impair P-glycoprotein induced PTX efflux and activate the apoptotic function of previous prosurvival Bcl-2 protein. This is the pioneer report of cationic amphiphilic polyester PHB-PDMAEMA to codeliver anticancer drug and therapeutic plasmid to overcome both pump and non-pump mediated chemotherapeutic resistance in liver cancer cells, which might be inspiring for the application of polyester in personalized cancer therapy.

Acetal-linked PEGylated paclitaxel prodrugs forming free-paclitaxel-loaded pH-responsive micelles with high drug loading capacity and improved drug delivery

Endosomal pH-responsive micellar nanoparticles were prepared by self-assembly of an amphiphilic poly(ethylene glycol)-acetal-paclitaxel (PEG-acetal-PTX) prodrug, and free PTX could be encapsulated in the hydrophobic core of the nanoparticles. These nanoparticles exhibited excellent storage stability for over 6months under normal conditions, but disassembled quickly in response to faintly acidic environment. Incorporating physical encapsulation and chemical conjugation, the PTX concentration in the nanoparticles solution could reach as high as 3665μg/mL, accompanying with a high drug loading capacity of 60.3%. Additionally, benefitting from the difference in drug release mechanism and rate between encapsulated PTX and conjugated PTX, a programmed drug release behavior was observed, which may result in higher intracellular drug concentration and longer action time. CCK-8 assays showed that the nanoparticles demonstrated superior antitumor activity than free PTX against both HeLa and MDA-MB-231 cells. These prodrug-based nanomedicines have a great potential in developing translational PTX formulations for cancer therapy.

Highlights in nanocarriers for the treatment against cervical cancer

Cervical cancer is the second most common malignant tumor in women worldwide and has a high mortality rate, especially when it is associated with human papillomavirus (HPV). In US, an estimated 12,820 cases of invasive cervical cancer and an estimated 4210 deaths from this cancer will occur in 2017. With rare and very aggressive conventional treatments, one sees in the real need of new alternatives of therapy as the delivery of chemotherapeutic agents by nanocarriers using nanotechnology. This review covers different drug delivery systems applied in the treatment of cervical cancer, such as solid lipid nanoparticles (SNLs), liposomes, nanoemulsions and polymeric nanoparticles (PNPs). The main advantages of drug delivery thus improving pharmacological activity, improving solubility, bioavailability to bioavailability reducing toxicity in the target tissue by targeting of ligands, thus facilitating new innovative therapeutic technologies in a too much needed area. Among the main disadvantage is the still high cost of production of these nanocarriers. Therefore, the aim this paper is review the nanotechnology based drug delivery systems in the treatment of cervical cancer.

Using μ2rheology to quantify rheological properties during repeated reversible phase transitions of soft matter

A microfluidic device is designed to measure repeated phase transitions, gelation and degradation, on a single sample by exchanging the surrounding fluid while minimizing shear stress. This device enables quantitative microrheological characterization of material properties over multiple phase transitions, determining whether the material returns to the same equilibrium state. Fluid exchange is accomplished by using a two layer design, the sample is trapped in the first layer and the second layer is a well for the exchanging fluid. Fluid enters the sample chamber symmetrically creating equal pressure around the sample, trapping it in place. Multiple particle tracking (MPT) microrheology, a passive microrheological technique, measures the dynamic rheological properties during each phase transition. Combining rheological characterization and sample manipulation using microfluidics is termed μ²rheology. The utility of this technique is demonstrated by characterizing several phase transitions of a fibrous colloidal gel, hydrogenated castor oil. Gelation and degradation is induced by an osmotic pressure gradient created by contact with a glycerine based gelling agent and water, respectively. Several transitions are measured using a single sample. Nine transitions, five gel-sol and four sol-gel, are the maximum number of transitions characterized in a single sample. This microfluidic device and measurement technique is widely applicable and can be easily adapted to any system where solvent exchange is used to induce a change in material properties.

Injectable Supramolecular Hydrogels as Delivery Agents of Bcl-2 Conversion Gene for the Effective Shrinkage of Therapeutic Resistance Tumors

Injectable hydrogels to deliver therapeutic genes in a minimally invasive manner and to achieve long term sustained release at tumor sites to minimize side effects are attractive for cancer therapy and precision medicine, but its rational design remains a challenge. In this report, an injectable supramolecular hydrogel system is designed based on the polypesudorotaxane formation between α-cyclodextrin (α-CD) and cationic methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone)-b-poly(ethylene imine) (MPEG-PCL-PEI) copolymer, with the ability to form polyplexes with anionic plasmid DNA for effective sustained gene delivery. To be mentioned, the MPEG-PCL-PEI copolymers show similar pDNA binding ability, better gene transfection efficiency, lower cytotoxicity than nonviral gene transfection gold standard PEI (25 kDa), due to the formation of micelles and more stable polyplexes. More importantly, this MPEG-PCL-PEI/α-CD/pDNA supramolecular hydrogel shows a sustained release of pDNA in form of polyplex for up to 7 d. By taking these advantages, this supramolecular hydrogel system is applied as an injectable carrier for sustained Bcl-2 conversion gene release, in an in vivo rodent model of therapeutic resistant hepatocarcinoma with high expression of antiapoptotic Bcl-2 protein. This work represents the first time that injectable MPEG-PCL-PEI/α-CD supramolecular hydrogels possess good controllable release effect of Bcl-2 conversion genes in the form of polyplex to effectively inhibit in vivo tumor growth and this "enemy to friend" strategy will benefit various applications, including on-demand gene delivery and personalized medicine.

Emerging bone tissue engineering via Polyhydroxyalkanoate (PHA)-based scaffolds

Polyhydroxyalkanoates (PHAs) are a class of biodegradable polymers derived from microorganisms. On top of their biodegradability and biocompatibility, different PHA types can contribute to varying mechanical and chemical properties. This has led to increasing attention to the use of PHAs in numerous biomedical applications over the past few decades. Bone tissue engineering refers to the regeneration of new bone through providing mechanical support while inducing cell growth on the PHA scaffolds having a porous structure for tissue regeneration. This review first introduces the various properties PHA scaffold that make them suitable for bone tissue engineering such as biocompatibility, biodegradability, mechanical properties as well as vascularization. The typical fabrication techniques of PHA scaffolds including electrospinning, salt-leaching and solution casting are further discussed, followed by the relatively new technology of using 3D printing in PHA scaffold fabrication. Finally, the recent progress of using different types of PHAs scaffold in bone tissue engineering applications are summarized in intrinsic PHA/blends forms or as composites with other polymeric or inorganic hybrid materials.

Balancing Segregation and Complexation in Amphiphilic Copolymers by Architecture and Confinement

Segregation is a well-known principle for micellization, as solvophobic components try to minimize interactions with other entities (such as solvent) by self-assembly. An opposite principle is based on complexation (or coacervation), leading to the coassembly/association of different components. Most cases in the literature rely on only one of these modes, though the classical micellization scheme (such as spherical micelles, wormlike micelles, and vesicles) can be enriched by a subtle balance of segregation and complexation. Because of their counteraction, micellar constructs with unprecedented structure and behavior could be obtained. In this feature, systems are highlighted, which are between both mechanisms, and we study concentration, architecture, and confinement effects. Systems with inter- and intramolecular interactions are presented, and the effects of polymer topology and monomer sequence on the resulting structures are discussed. It is shown that complexation can lead to altered micellization behavior as the complex of one hydrophobic and one hydrophilic component can have a very low surface tension toward the solvent. Then, the more soluble component is enriched at the surface of the complex and acts as a microsurfactant. Although segregation dominates for amphiphilic copolymers in solution, the effect of the complexation can be enhanced by branching (change of architecture). Another possibility to enhance the complexation is by confining copolymers in a (pseudo-) 2D environment (like the one available at liquid-liquid interfaces). These observations show how new structural features can be achieved by tuning the subtle balance between segregation and complexation/solubilization.

pH-triggered degradable polymeric micelles for targeted anti-tumor drug delivery

2-(Octadecyloxy)-1,3-dioxan-5-amine (OD) with an acid degradable ortho ester group was synthesized, and conjugated to hyaluronic acid (HA) backbone to prepare pH-responsive and tumor-targeted hyaluronic acid-2-(octadecyloxy)-1,3-dioxan-5-amine (HOD) conjugates. ¹H NMR was used to confirm the structures of the OD and HOD. The studies of pH-responsive behavior showed that HOD micelles were stable under physiological conditions while they were degraded in the tumor acidic microenvironment. Doxorubicin (DOX)-loaded HOD micelles (DOX/HOD) with a narrow size distribution were prepared and characterized. The increased release of DOX from DOX/HOD micelles was presented at low pH condition. From in vitro cytotoxicity assays against MCF-7 cells, the blank micelles exhibited low cytotoxicity, but DOX/HOD micelles had the higher cytotoxicity than pH insensitive control and free DOX. Cellular uptake experiments and confocal images demonstrated that pH-sensitive DOX/HOD micelles could be internalized efficiently by CD44 receptor mediated endocytosis, and then DOX was rapidly released due to pH-induced degradable of OD to cell nucleus compared to the non-sensitive micelles. Furthermore, endocytosis inhibition studies presented that DOX/HOD micelles were internalized into cells mainly via caveolae-mediated routes. In vivo study of micelles in tumor-bearing mice indicates that HOD micelles were more effectively accumulated into the tumor tissue than HOA micelles. These results verify that the pH-sensitive HOD micellar system is a promising nanocarrier for enhanced internalization of antitumor drugs to cancer cells.

Construction of biodegradable and biocompatible AIE-active fluorescent polymeric nanoparticles by Ce(IV)/HNO3 redox polymerization in aqueous solution

Aggregation-induced emission (AIE) active fluorescence polymeric nanoparticles (FPNs) have recently received increasing interests for biomedical applications such as cell imaging, drug delivery, disease diagnosis and treatment. Fabricated strategies of AIE-active FPNs with high efficiency, simplification and tenderness are still passionately pursued to promote the development of theranostic systems. In this work, we develop a facile method for the preparation of AIE-active FPNs by adopting Ce(IV)/HNO₃ redox polymerization under near room temperature. Thus-prepared FPNs (named as PEG-PLC-1) possess unique AIE feature, great water dispersity, excellent biocompatibility and biodegradability because of the conjugation of ultra-bright AIE dye (PhE-alc) and biodegradable PEG-PCL linear copolymers. The ¹H nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), UV-Visible and fluorescence spectrometers were used to confirm the successful fabrication of AIE-active FPNs. Cell viability and cellular uptake behavior of PEG-PLC-1 FPNs were further investigated for their potential biomedical applications. Results demonstrated that PEG-PLC-1 FPNs are high water dispersity, intensive luminescence and low cytotoxicity, making them very attractive for biomedical applications. More importantly, the method for the fabrication of AIE-active biodegradable FPNs can be occurred under rather facile conditions (e.g., low temperature, free of metal catalysts, common chain transfer agent and aqueous solution) and are specially used for fabrication of AIE-active polysaccharides with poor organic solubility.

Targeted delivery of Bcl-2 conversion gene by MPEG-PCL-PEI-FA cationic copolymer to combat therapeutic resistant cancer

Deregulation of anti-apoptosis Bcl-2 protein expression was a key feature in human cancers with therapeutic resistance. Nuclear receptor Nur77 could induce the conformation change of Bcl-2 protein and converted it into an apoptosis inducer by "enemy to friend" strategy. However, the safe and effective delivery of this gene to combat therapeutic resistant cancer remained largely unexplored. In this report, we designed an amphiphilic cationic MPEG-PCL-PEI-FA copolymer, comprising biocompatible and hydrophilic methoxy-poly(ethylene glycol) (MPEG), biodegradable and hydrophobic poly(ε-caprolactone) (PCL), cationic poly(ethylene imine) (PEI) segments, and folic acid (FA) as targeting group, as a high efficient Nur77 gene carrier to folate receptor (FR) highly expressed and therapeutic resistant HeLa/Bcl-2 cancer cells. Interestingly, due to the incorporation of PCL and PEG segments, this MPEG-PCL-PEI-FA copolymer showed less toxicity but better gene transfection efficiency than non-viral gene carrier gold standard PEI (25kDa). This might be due to the formation of micelles to stabilize polyplex for enhanced gene transfection ability. More importantly, MPEG-PCL-PEI-FA copolymer exhibited excellent growth inhibition ability on therapeutic resistant HeLa/Bcl-2 cancer cells, which was FR overexpressed HeLa cervical cancer cells with high expression of Bcl-2 protein, thanks to its FA induced targeting ability, high gene transfection efficiency, and low cytotoxicity. This work signifies the first time that cationic amphiphilic MPEG-PCL-PEI-FA copolymers could be utilized for the gene delivery to therapeutic resistant cancer cells with high expression of anti-apoptosis Bcl-2 protein and the positive results are encouraging for the further design of polymeric platforms for combating drug resistant tumors.

PCL-based thermo-gelling polymers for in vivo delivery of chemotherapeutics to tumors

The synthesis of a multiblock poly(ether ester urethane)s comprising poly(ε-caprolactone), poly(ethylene glycol), and poly(propylene glycol) segments is described. We found that this polymer possessed a critical thermo-gelation concentration of 4wt%. Molecular characterization of the polymer was performed in terms of molecular weight determination, chemical composition elucidation and functional group determination using GPC, NMR, and FTIR. We carried out in vitro paclitaxel and doxorubicin release studies and demonstrated that sustained therapeutic release of about 2weeks can be obtained with this system. A nude mice model of tumor was developed and intratumoral injection of therapeutic-loaded thermo-gel demonstrated that PTX-loaded thermo-gel effectively inhibited the growth of tumors.

Supramolecular cyclodextrin nanocarriers for chemo- and gene therapy towards the effective treatment of drug resistant cancers

A tumor active targeting β-cyclodextrin based nanocarrier β-NC-OEI-SS-FA was designed by the modification of star shaped cationic derivatives β-NC-OEI with folic acid through a disulfide bond, to co-deliver chemotherapeutic paclitaxel and the Nur77 gene for overcoming Bcl-2 mediated non-pump resistance by an "enemy to friend" strategy for potential drug resistant cancer therapy.