Pectin nanoparticles loaded with nitric oxide donor drug: A potential approach for tissue regeneration

The process of wound healing and tissue regeneration involves several key mechanisms to ensure the production of new tissues with similar cellular functions. This study investigates the impact of pectin, a natural polysaccharide, and nebivolol hydrochloride (NBV), a nitric oxide (NO) donor drug, on wound healing. Utilizing ionotropic gelation, NBV-loaded pectin nanoparticles were developed following a 2231 full factorial design. The optimized formulation, determined using Design expert® software, exhibited an encapsulation efficiency percentage of 70.68%, zeta potential of -51.4 mV, and a particle size of 572 nm, characterized by a spherical, discrete morphology. An in vivo study was conducted to evaluate the effectiveness of the optimal formulation in wound healing compared to various controls. The results demonstrated the enhanced ability of the optimal formulation to accelerate wound healing. Moreover, histopathological examination further confirmed the formulation's benefits in tissue proliferation and collagen deposition at the wound site 15 days post-injury. This suggests that the developed formulation not only promotes faster healing but does so with minimal side effects, positioning it as a promising agent for effective wound healing and tissue regeneration.

Polysaccharides polymers for glaucoma treatment-a review

One of the major challenges in preventing glaucoma progression is patient compliance with medication regimens. Since conventional ophthalmic dosage forms have numerous limitations, researchers have been intensively working on developing polymers-based delivery systems for glaucoma drugs. Specifically, research and development efforts have increased using polysaccharide polymers such as sodium alginate, cellulose, β-cyclodextrin, hyaluronic acid, chitosan, pectin, gellan gum, galactomannans for sustained release to the eye to overcome treatment challenges, showing promise in improving drug release and delivery, patient experience, and treatment compliance. In the recent past, multiple research groups have successfully designed sustained drug delivery systems, promoting the efficacy as well as the feasibility of glaucoma drugs with single/combinations of polysaccharides to eliminate the drawbacks associated with the glaucoma treatment. Naturally available polysaccharides, when used as drug vehicles can increase the retention time of eye drops on the ocular surface, leading to improved drug absorption and bioavailability. Additionally, some polysaccharides can form gels or matrices that can release drugs slowly over time, providing sustained drug delivery and reducing the need for frequent dosing. Thus, this review aims to provide an overview of the pre-clinical and clinical studies of polysaccharide polymers applied for glaucoma treatment along with their therapeutic outcomes.

Extraction, characterization and biological activity of Galactomannan rich endosperm of Borassus flabellifer (Linn.) suitable for biofabrication of tissue scaffolds

The study deals with the isolation, purification and characterization of galactomannan from the endosperm of Borassus labellifer (Linn.) to be used for biomaterial fabrication in tissue engineering (TE) applications. The isolated Borassus flabellifer (Linn.) galactomannan (BFG) through a sequential aqueous dissolution, centrifugation and ethanol precipitation presented a total yield of 19.77 ± 1.05 % (w/w) with advantageous compositional and functional properties. BFG was found to have mannose to galactose (M/G) ratio of 1.4:1. The molecular weight of BFG was found to be 4.9 × 105 g/mol and the molecular structure analysis by FTIR and NMR spectroscopy revealed the presence of α-linked, d-galactopyranose units and β-linked, D-mannopyranose units. Further characterization by rheometer confirmed the non-Newtonian and pseudo-plastic behavior of different BFG concentrations and structural analysis by XRD and SEM confirmed the amorphous nature of BFG with the presence of pores and cervices on the rough surface. Finally, the favorable biological activity demonstrated in response to fibroblast cells against different BFG concentrations substantiates its relevance to be used in biofabrication of tissue scaffolds.

Potential of pectin for biomedical applications: a comprehensive review

Pectin is a polysaccharide extracted from various plants, such as apples, oranges, lemons, and it possesses some beneficial effects on human health, including being hypoglycemic and hypocholesterolemic. Therefore, pectin is used in various pharmaceutical and biomedical applications. Meanwhile, its low mechanical strength and fast degradation rate limit its usage as drug delivery devices and tissue engineering scaffolds. To enhance these properties, it can be modified or combined with other organic molecules or polymers and/or inorganic compounds. These materials can be prepared as nano sized drug carriers in the form of spheres, capsules, hydrogels, self assamled micelles, etc., for treatment purposes (mostly cancer). Different composites or blends of pectin can also be produced as membranes, sponges, hydrogels, or 3D printed matrices for tissue regeneration applications. This review is concentrated on the properties of pectin based materials and focus especially on the utilization of these materials as drug carriers and tissue engineering scaffolds, including 3D printed and 3D bioprinted systems covering the studies in the last decade and especially in the last 5 years.

In-situ tear fluid dissolving nanofibers enable prolonged viscosity-enhanced dual drug delivery to the eye

Liquid and semi-solid formulations are the most commonly used drug delivery systems for ophthalmic diseases. Upon application into the conjunctival sac, these systems introduce a variable and unphysiologically high liquid volume to the eye, resulting in overflow and extensive nasolacrimal drainage, accounting for dosing inaccuracy and short ocular residence time. In this study, we present nanofibrous electrospun scaffolds composed of biocompatible polymers, overcoming these challenges by immediate drug release. The fibers incorporate gentamicin and dexamethasone, intended for the treatment of bacterial conjunctivitis. Upon contact with the ocular surface, the nanofibers immediately dissolve in the tear fluid, quantitatively releasing the two actives, yielding over92% drug recovery, determined with fluorimetric and chromatographic quantifications methods. Simultaneously, the viscosity of the tear fluid increases, shown by complex viscometry measurements. A newly developed ex vivo microfluidic porcine cornea model was used to evaluated ocular residence time. In contrast to fluid eye drops, the contact time was significantly prolonged and 20min after application, an increase in drug availability on the ocular surface of 342% was observed. Biocompatibility of the polymer system was demonstrated in an OECD approved in vitro cornea model. The antibacterial activity after processing was evaluated according to EUCAST guidelines, and storage stability of the system was confirmed over a 12-week period. This innovative drug delivery system poses a highly promising platform technology, overcoming challenges associated with conventional dosage forms for drug delivery to the anterior eye and thus significantly advancing therapeutic approaches.

A supramolecular thermosensitive gel of ketoconazole for ocular applications: In silico, in vitro, and ex vivo studies

The incidence of corneal fungal infections continues to be a growing concern worldwide. Ocular delivery of anti-fungal drugs is challenging due to the anatomical and physiological barriers of the eye. The ocular bioavailability of ketoconazole (KTZ), a widely prescribed antifungal agent, is hampered by its limited aqueous solubility and permeation. In the study, the physicochemical properties of KTZ were improved by complexation with sulfobutylether-β-cyclodextrin (SBE-β-CD).KTZ-SBE-β-CD complex was studied in silico with docking and dynamics simulations, followed by wet-lab experiments.The optimized KTZ-SBE-β-CD complex was loaded into a thermosensitivein situ gel to increase corneal bioavailability. The supramolecular complex increased the solubility of KTZ by 5-folds and exhibited a 10-fold increment in drug release compared to the pure KTZ. Owing to the diffusion, thein situ gel exhibited a more sustained drug release profile. Theex vivocorneal permeation studies showed higher permeation from KTZ-SBE-β-CD in situ gel (flux of ∼19.11 µg/cm²/h) than KTZin situ gel (flux of ∼1.17 µg/cm²/h). The cytotoxicity assays and the hen's egg chorioallantoic membrane assay (HET-CAM) confirmed the formulations' safety and non-irritancy. In silico guided design of KTZ-SBE-β-CD inclusion complexes successfully modified the physicochemical properties of KTZ. In addition, the loading of the KTZ-SBE-β-CD complex into an in situ gel significantly increased the precorneal retention and permeation of KTZ, indicating that the developed formulation is a viable modality to treat fungal keratitis.

Multilayer Films Based on Chitosan/Pectin Polyelectrolyte Complexes as Novel Platforms for Buccal Administration of Clotrimazole

Buccal films are recognized as easily applicable, microbiologically stable drug dosage forms with good retentivity at the mucosa intended for the therapy of oromucosal conditions, especially infectious diseases. Multilayer films composed of layers of oppositely charged polymers separated by ionically interacting polymeric chains creating polyelectrolyte complexes represent very interesting and relatively poorly explored area. We aimed to develop the antifungal multilayer systems composed of cationic chitosan and anionic pectin as potential platforms for controlled delivery of clotrimazole. The systems were pharmaceutically characterized with regard to inter alia their release kinetics under different pH conditions, physicomechanical, or mucoadhesion properties with using an animal model of the buccal mucosa. The antifungal activity against selected Candida sp. and potential cytotoxicity with regard to human gingival fibroblasts were also evaluated. Interactions between polyions were characterized with Fourier transform infrared spectroscopy. Different clotrimazole distribution in the films layers highly affected their in vitro dissolution profile. The designed films were recognized as intelligent pH-responsive systems with strong antifungal effect and satisfactory safety profile. As addition of chitosan resulted in the improved antifungal behavior of the drug, the potential utilization of the films in resistant cases of oral candidiasis might be worth of further exploration.

Hydroxypropyl Methylcellulose-Based Hydrogel Copolymeric for Controlled Delivery of Galantamine Hydrobromide in Dementia

The study aims to prepare a smart copolymeric for controlled delivery of Galantamine hydrobromide. The synthesis of the hydrogel was executed through free radical polymerization using HPMC (Hydroxypropyl methylcellulose) and pectin as polymers and acrylic acid as monomer. Cross-linking was performed by methylene bisacrylamide (MBA). HPMC-pectin-co-acrylic acid hydrogel was loaded with Galantamine hydrobromide (antidementia drug) as a model drug for treatment of Alzheimer based dementia. Formulated hydrogels (SN1–SN9) were characterized for Fourier transform-infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, and energy dispersive X-ray. Drug loading efficiency, gel fraction, measurements of porosity, and tensile strength were reported. Swelling and release studies were performed at pH 1.2 and 7.4. Drug liberation mechanism was evaluated by applying different release kinetic models. Galantamine hydrobromide was released from prepared hydrogels by Fickian release mechanism. Swelling, gel fraction, porosity, and drug release percentages were found to be dependent on hydroxypropyl methylcellulose, pectin, acrylic acid, and methylene bisacrylamide concentrations. By increasing HPMC amount, swelling was increased from 76.7% to 95.9%. Toxicity studies were conducted on albino male rabbits for a period of 14 days. Hematological and histopathological studies were carried out to evaluate safety level of hydrogel. Successfully prepared HPMC-pectin-co-acrylic acid hydrogel showed good swelling and release kinetics, which may help greatly in providing controlled release drug effect leading to enhanced patient compliance for dementia patients.

Impregnation of pectin-cedarwood essential oil nanocapsules onto mini cotton bag improves larvicidal performances

The use pesticide is one of the indispensable means to combat mosquito borne diseases. However, the repeated use of synthetic pesticides has induced resistance in the vector pest along with undesirable impact on the environment. The biodegradability, non-persistent and user’s safety are the root cause to prefer plant-derived pesticides to synthetic ones. The botanical based pesticides tend to degrade rapidly under the influence of several environmental factors. For the feasible application as pesticides, the plant products are formulated either as liquid or as purely solid. Despite well-established formulation technology in pesticide delivery, their handling trouble is being ignored. There is difficulty in liquid formulation of pesticide products, as they are prone to splashing and spillage, resulting in contamination, wastage and direct exposure to skin; whereas a solid formulation tends to produce dust. In the present work, cedarwood (Cedrus deodara) essential oil embedded pectin nanocapsules were produced. The nanocapsules were characterized according to their morphology, size, encapsulation efficiency and thermal stability. Furthermore, the nanocapsules were impregnated onto mini cotton tea bags to be employed as RTU (ready to use) formulation for treating the breeding sites of mosquitoes. The larvicidal activity of the bags treated with pectin-cedar wood nanocapsules was assessed against malaria vector, Anopheles culicifacies and 98% mortality was recorded till 4 weeks, this suggests its potential and hassle free applications in controlling mosquito vector.

Biodegradable film based on pectin/Nano-clay/methylene blue: Structural and physical properties and sensing ability for measurement of vitamin C

In this study, biodegradable film based on pectin modified with Nanoclay and methylene blue was prepared. The Physicomechanical properties of the prepared film, including: thickness, water solubility, water vapor permeability (WVP), antioxidant activity and color properties were investigated. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Differential scanning calorimetry (DSC) and texture analysis techniques were used to investigate the physical and mechanical properties of the films. The optimum Pec/Clay/MB film was used as a colorimeter sensor to detect and measure vitamin C. The results showed that the addition of Nanoclay to the film increased the thickness and decreased the solubility of water and reduced the WVP. The addition of methylene blue had no significant effect on the thickness, but increased water solubility and increased antioxidant activity. The addition of Nanoclay increased the tensile strength (TS) of the film, but decreased its elongation at break (EB). The addition of Nanoclay increased the melting temperature of the film and decreased its crystallization temperature. In the SEM images, the clay particles at 50-100 nm in the film structure were characterized. Nanoclay and methylene blue reduced the surface cleavage of the film. Pec/Clay/MB film color was changed from blue to colorless in the presence of vitamin C. The linear range of vitamin C measurement was 10 to 500 and the detection limit was 10. By detecting the color changes of the film in the presence of vitamin C, the amount of this vitamin was measured in orange, kiwi and tangerine juice. The accuracy of the data was evaluated by the titration method. The sensor accuracy was obtained over 90%.

Polysaccharides in Ocular Drug Delivery

Polysaccharides, such as cellulose, hyaluronic acid, alginic acid, and chitosan, as well as polysaccharide derivatives, have been successfully used to augment drug delivery in the treatment of ocular pathologies. The properties of polysaccharides can be extensively modified to optimize ocular drug formulations and to obtain biocompatible and biodegradable drugs with improved bioavailability and tailored pharmacological effects. This review discusses the available polysaccharide choices for overcoming the difficulties associated with ocular drug delivery, and it explores the reasons for the dependence between the physicochemical properties of polysaccharide-based drug carriers and their efficiency in different formulations and applications. Polysaccharides will continue to be of great interest to researchers endeavoring to develop ophthalmic drugs with improved effectiveness and safety.

Harmonious Biomaterials for Development of In situ Approaches for Locoregional Delivery of Anti-cancer Drugs: Current Trends

Locoregional drug delivery is a novel approach for the effective delivery of anti-cancer agents as it exposes the tumors to high concentration of drugs. In situ gelling systems have fetched paramount attention in the field of localized cancer chemotherapy due to their targeted delivery, ease of preparation, prolonged or sustained drug release and improved patient compliance. Numerous polymers have been investigated for their properties like swelling along with biodegradation, drug release and physicochemical properties for successful targeting of the drugs at the site of implantation. The polymers such as chitosan, Hyaluronic Acid (HA), poloxamer, Poly Glycolic Lactic Acid (PGLA) and Poly Lactic Acid (PLA) tend to form in situ hydrogels and have been exploited to develop localized delivery vehicles. These formulations are administered in the solution form and on exposure to physiological environment such as temperature, pH or ionic composition they undergo phase conversion into a hydrogel drug depot. The use of in situ gelling approach has provided prospects to increase overall survival and life quality of cancer patient by enhancing the bioavailability of drug to the site of tumor by minimizing the exposure to normal cells and alleviating systemic side effects. Because of its favorable safety profile and clinical benefits, United States Food and Drug Administration (U.S. FDA) has approved polymer based in situ systems for prolonged locoregional activity. This article discusses the rationale for developing in situ systems for targeted delivery of anti-cancer agents with special emphasis on types of polymers used to formulate the in situ system. In situ formulations for locoregional anti-cancer drug delivery that are marketed and are under clinical trials have also been discussed in detail in this article.