Preparation and characterization of PAM/SA tough hydrogels reinforced by IPN technique based on covalent/ionic crosslinking

Design and construction of high strength double network hydrogel with flow-induced orientation

The design and construction of high strength hydrogels is a widely discussed topic in hydrogel research. In this study, we combined three toughening strategies, including dual network, oriented structure construction and nanophase doping, to develop an alginate/polyacrylamide (PAM)/modified titanium dioxide fiber (TiO2 NF@PAM) dual network composite hydrogel prepared via syringe. The effects of different preparation methods, AM/Alginate ratios, inorganic doping phases and TiO2 NF@PAM/AM ratios on the mechanical properties of composite hydrogels were investigated. The study found that the alginate hydrogel prepared by syringe exhibited superior axial orientation and achieved a tensile strength of (1091 ± 46) kPa. And the composite hydrogel doped with 0.2 wt% TiO2 NF@PAM had a tensile strength of (1006 ± 64) kPa, which was higher than that of the composite hydrogel doped with 0.2 wt% TiO2 nanoparticles (976 ± 66) kPa. The highest tensile strength (1120 ± 67) kPa and elongation at break (182 ± 8) % were achieved when the ratio of TiO2 NF@PAM/AM was 0.6 wt%. The force applied to the gel solution in the syringe affects the orientation of the polymer chains and TiO2 NF@PAM within the gel, which subsequently impacts the mechanical properties of the hydrogel. Therefore, we further investigated the mechanical properties of composite hydrogels under varying propulsion speeds, syringe diameters, and syringe lengths. It was observed that the gel solution's shear strength increased as the syringe diameter decreased. The resulting composite hydrogels were better oriented and had improved mechanical properties. The composite hydrogels' tensile strength peaked at (1117 ± 47) kPa when the syringe advance rate was between 1-7 mL/min. The mechanical properties of the hydrogels were optimal when the syringe length was 30 mm, with a maximum tensile strength of (1131 ± 67) kPa and a tensile ratio of (166 ± 5) %. This study demonstrates the viability of integrating three distinct strengthening methodologies to generate hydrogels of considerable strength. Furthermore, the Alginate/PAM/TiO2 NF@PAM composite hydrogels possess remarkable potential as adaptable, wearable sensors due to their exemplary mechanical properties, knittability, and conductivity.

Fabrication and property of the avermectin-attapulgite composites regulated by mixed-surfactants and sodium alginate

OA-AP, DTAB-AP, DDBAB-AP complexes were synthesized by introducing surfactants of OA, DTAB and DDBAB into attapulgite (AP). The complexes were systematically characterized. The appearance of new diffraction peaks at low angle indicated a new lamellar structure of OA (DTAB, DDBAB)-AP complexes. Then, the pesticide avermectin (AV) composites of AV/DTAB-OA-AP, AV/DDBAB-OA-AP, sodium alginate (SA) @AV/DTAB-OA-AP and SA@AV/DDBAB-OA-AP were prepared and investigated detailedly. The basal spacings of AV/DTAB-OA-AP and AV/DDBAB-OA-AP were bigger than those of OA-AP and DTAB(DDBAB)-AP. The existences of AV, surfactants and SA molecules of the composites were further confirmed. Furthermore the effect of SA on AV release behaviors of SA@AV/DTAB (DDBAB)-OA-AP microspheres was investigated and compared. Compared to AV/DTAB (DDBAB)-OA-AP, the released rate of the microspheres decreased remarkably. The AV release behaviors of AV/DTAB (DDBAB)-OA-AP could be fitted with pseudo second-order model, while the first-order model was better to describe those of the microspheres. Finally, the bioassay of the microspheres were studied and analyzed. The microspheres had a longer duration and control effect on Mythimna separata. This study could be helpful to provide a pesticide delivery system to improve the utilization efficiency of pesticides.

Poly(N-isopropylacrylamide)-Based Hydrogels for Biomedical Applications: A Review of the State-of-the-Art

A prominent research topic in contemporary advanced functional materials science is the production of smart materials based on polymers that may independently adjust their physical and/or chemical characteristics when subjected to external stimuli. Smart hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) demonstrate distinct thermoresponsive features close to a lower critical solution temperature (LCST) that enhance their capability in various biomedical applications such as drug delivery, tissue engineering, and wound dressings. Nevertheless, they have intrinsic shortcomings such as poor mechanical properties, limited loading capacity of actives, and poor biodegradability. Formulation of PNIPAM with diverse functional constituents to develop hydrogel composites is an efficient scheme to overcome these defects, which can significantly help for practicable application. This review reports on the latest developments in functional PNIPAM-based smart hydrogels for various biomedical applications. The first section describes the properties of PNIPAM-based hydrogels, followed by potential applications in diverse fields. Ultimately, this review summarizes the challenges and opportunities in this emerging area of research and development concerning this fascinating polymer-based system deep-rooted in chemistry and material science.

Skin-like Transparent Polymer-Hydrogel Hybrid Pressure Sensor with Pyramid Microstructures

Soft biomimetic electronic devices primarily comprise an electronic skin (e-skin) capable of implementing various wearable/implantable applications such as soft human–machine interfaces, epidermal healthcare systems, and neuroprosthetics owing to its high mechanical flexibility, tissue conformability, and multifunctionality. The conformal contact of the e-skin with living tissues enables more precise analyses of physiological signals, even in the long term, as compared to rigid electronic devices. In this regard, e-skin can be considered as a promising formfactor for developing highly sensitive and transparent pressure sensors. Specifically, to minimize the modulus mismatch at the biotic–abiotic interface, transparent-conductive hydrogels have been used as electrodes with exceptional pressing durability. However, critical issues such as dehydration and low compatibility with elastomers remain a challenge. In this paper, we propose a skin-like transparent polymer-hydrogel hybrid pressure sensor (HPS) with microstructures based on the polyacrylamide/sodium-alginate hydrogel and p-PVDF-HFP-DBP polymer. The encapsulated HPS achieves conformal contact with skin due to its intrinsically stretchable, highly transparent, widely sensitive, and anti-dehydrative properties. We believe that the HPS is a promising candidate for a robust transparent epidermal stretchable-skin device.

Hydrogel Small-Diameter Vascular Graft Reinforced with a Braided Fiber Strut with Improved Mechanical Properties

Acute thrombosis remains the main limitation of small-diameter vascular grafts (inner diameter <6 mm) for bridging and bypassing of small arteries defects and occlusion. The use of hydrogel tubes represents a promising strategy. However, their low mechanical strength and high swelling tendency may limit their further application. In the present study, a hydrogel vascular graft of Ca alginate/polyacrylamide reinforced with a braided fiber strut was designed and fabricated with the assistance of a customized casting mold. Morphology, structure, swellability, mechanical properties, cyto- and hemocompatibility of the reinforced graft were characterized. The results showed that the reinforced graft was transparent and robust, with a smooth surface. Scanning electron microscopic examination confirmed a uniform porous structure throughout the hydrogel. The swelling of the reinforced grafts could be controlled to 100%, obtaining clinically satisfactory mechanical properties. In particular, the dynamic circumferential compliance reached (1.7 ± 0.1)%/100 mmHg for 50-90 mmHg, a value significantly higher than that of expanded polytetrafluoroethylene (ePTFE) vascular grafts. Biological tests revealed that the reinforced graft was non-cytotoxic and had a low hemolysis percentage (HP) corresponding to (0.9 ± 0.2)%. In summary, the braided fiber-reinforced hydrogel vascular grafts demonstrated both physical and biological superiority, suggesting their suitability for vascular grafts.

Surface modification of polyvinyl alcohol (PVA)/polyacrylamide (PAAm) hydrogels with polydopamine and REDV for improved applicability

Developing a small-diameter vascular graft with a satisfactory performance in terms of mechanical and biological properties remains a challenging issue because of comprehensive requirements from clinical applications. Polyvinyl alcohol (PVA)/polyacrylamide (PAAm) hydrogels exhibit many desirable characteristics for small-diameter vascular grafts because of their tunable mechanical properties, especially high compliance. However, poor cells adhesion hinders their application for endothelialization in situ. Therefore, in the present work, polydopamine (PDA) and tetrapeptide Arg-Glu-Asp-Val (REDV) were used to functionalize the hydrogels surface and improve cells adhesion. A series of characterizations were systematically conducted to examine the applicability of coated hydrogels to small-diameter vascular grafts. Results showed that bare and coated hydrogels have appropriate structural stability, and no significant differences in tensile properties could be found after being coated with PDA or PDA-REDV. The hydrophilicity of the hydrogels decreased with the coatings of PDA and especially PDA-REDV to improve protein adsorption, porcine iliac artery endothelial cells (PIECs) adhesion, viability, proliferation, and spreading on the hydrogels. Lower hemolysis percentages and higher blood clotting index values were attained for the hydrogels, suggesting their satisfactory hemocompatibility. Overall, the present work provided insights into the development of a novel hydrogel-based small-diameter vascular graft. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:117-127, 2020.

Fundamentals of double network hydrogels

Double network (DN) hydrogels as promising soft-and-tough materials intrinsically possess extraordinary mechanical strength and toughness due to their unique contrasting network structures, strong interpenetrating network entanglement, and efficient energy dissipation.