Role of poly(2-acrylamido-2-methyl-1-propanesulfonic acid) in the modification of polysulfone membranes for ultrafiltration

Performance Investigation of PSF-nAC Composite Ultrafiltration Membrane for Protein Separation

As a promising wastewater treatment technology, ultrafiltration membranes face challenges related to fouling and flux reduction. To enhance these membranes, various strategies have been explored. Among them, the incorporation of nano-activated carbon (nAC) powder has emerged as an effective method. In this study, composite polysulfone (PSF) ultrafiltration membranes were fabricated using nAC powder at concentrations ranging from 0 to 8 wt.%. These membranes underwent comprehensive investigation, including assessments of membrane morphology, hydrophilicity, pure water flux, equilibrium water content, porosity, average pore size, and protein separation. The addition of activated carbon improved several desirable properties. Specifically, the hydrophilicity of the PSF membranes was enhanced, with the contact angle reduced from 69° to 58° for 8 wt.% of nAC composite membranes compared to the pristine PSF membrane. Furthermore, the water flux test revealed that 6 wt.% activated carbon-based membranes exhibited the highest flux, with a nearly 3 times improvement at 2 bar. Importantly, this enhancement did not compromise the protein rejection. Additionally, the introduction of nAC had a significant effect on the membrane's pore size by improving lysozyme rejection up to 40%. Overall, these findings will guide the selection of the optimal concentration of nAC for PSF ultrafiltration membranes.

Biopolymeric Nanocomposites for Wastewater Remediation: An Overview on Recent Progress and Challenges

Essential for human development, water is increasingly polluted by diverse anthropogenic activities, containing contaminants like organic dyes, acids, antibiotics, inorganic salts, and heavy metals. Conventional methods fall short, prompting the exploration of advanced, cost-effective remediation. Recent research focuses on sustainable adsorption, with nano-modifications enhancing adsorbent efficacy against persistent waterborne pollutants. This review delves into recent advancements (2020-2023) in sustainable biopolymeric nanocomposites, spotlighting the applications of biopolymers like chitosan in wastewater remediation, particularly as adsorbents and filtration membranes along with their mechanism. The advantages and drawbacks of various biopolymers have also been discussed along with their modification in synthesizing biopolymeric nanocomposites by combining the benefits of biodegradable polymers and nanomaterials for enhanced physiochemical and mechanical properties for their application in wastewater treatment. The important functions of biopolymeric nanocomposites by adsorbing, removing, and selectively targeting contaminants, contributing to the purification and sustainable management of water resources, have also been elaborated on. Furthermore, it outlines the reusability and current challenges for the further exploration of biopolymers in this burgeoning field for environmental applications.

Corn derivative mesoporous carbon microspheres supported hydrophilic polydopamine for development of new membrane: Water treatment containing bovine serum albumin

A new mixed matrix membrane (MMM) was prepared by incorporating biological mesoporous carbon microspheres (mCMSs) from corn starch polysaccharide-supported hydrophilic polydopamine (PDA), as a mesoporous and large-surface area filler, selective modifier, and pore-forming agent, into polyvinylidene fluoride (PVDF) matrix in presence of polyethylene glycol (PEG) as a hydrophilic agent. The structural parameters of the prepared membranes were characterized via FE-SEM, BET/BJH, XRD, FT-IR, and AFM analyses, sorption experiments, water permeability assessments, porosimetry tests, flux recovery ratio (FRR) evaluations, and contact angle measurements, with the so-called central composite design (CCD) been successfully applied for optimization and investigation of the effects of the operational parameters. The results were then applied to treat double-distilled water containing bovine serum albumin (BSA) utilizing a cross-module set-up. Based on the findings, the content of the mCMS-PDA in the PVDF matrix significantly affected the contact angle, pure water flux (PWF), FRR, and BSA removal. In this respect, the PWF of the PVDF-PEG-mCMS-PDA increased from 10.25 to 27.78 L/m² h with increasing the mCMS-PDA content, with the peak FRR (93.84%) of the PVDF-PEG-mCMS-PDA seen at maximum surface hydrophilicity of the membrane.

Recent Developments in Nanomaterials-Modified Membranes for Improved Membrane Distillation Performance

Membrane distillation (MD) is a thermally induced membrane separation process that utilizes vapor pressure variance to permeate the more volatile constituent, typically water as vapor, across a hydrophobic membrane and rejects the less volatile components of the feed. Permeate flux decline, membrane fouling, and wetting are some serious challenges faced in MD operations. Thus, in recent years, various studies have been carried out on the modification of these MD membranes by incorporating nanomaterials to overcome these challenges and significantly improve the performance of these membranes. This review provides a comprehensive evaluation of the incorporation of new generation nanomaterials such as quantum dots, metalloids and metal oxide-based nanoparticles, metal organic frameworks (MOFs), and carbon-based nanomaterials in the MD membrane. The desired characteristics of the membrane for MD operations, such as a higher liquid entry pressure (LEPw), permeability, porosity, hydrophobicity, chemical stability, thermal conductivity, and mechanical strength, have been thoroughly discussed. Additionally, methodologies adopted for the incorporation of nanomaterials in these membranes, including surface grafting, plasma polymerization, interfacial polymerization, dip coating, and the efficacy of these modified membranes in various MD operations along with their applications are addressed. Further, the current challenges in modifying MD membranes using nanomaterials along with prominent future aspects have been systematically elaborated.

MOFs for the treatment of arsenic, fluoride and iron contaminated drinking water: A review

Over the last few decades, the global pollution of surface and groundwater poses a serious threat not only to human beings but also towards aquatic lives due to the presence of emerging contaminants. Among the others, the presence of arsenic, fluoride, and iron are considered as the most common toxic pollutants in water bodies. The emergence of metal organic frameworks (MOFs) with high porosity and surface area is represented as significant inclusion into the era of entrapping contaminants present in drinking water. In the present review article, an in-depth insight is provided on the recent developments in the removal of arsenic, fluoride, and iron from drinking water using MOFs. Various aspects related to the synthesis, latest technologies adopted for the modifications in the synthesis process and advanced applications of MOFs for the removal of such contaminants are explicitly discussed. A detailed insight was provided to understand the mechanism of various interactions of MOFs with arsenic and fluoride. With respect to arsenic, fluoride, and iron removal the ultrastructural morphology of MOFs is assessed based on different molecular arrangements. Further, commercial aspects of various MOFs are presented in order to highlight the process feasibility. Finally, various perspectives and challenges involved in process scale up are comprehensively narrated with an aspiration of futuristic developments. The paper will be beneficial to the readers for acquiring a piece of in-depth knowledge on MOFs and its various synthesis approaches along with remarkable achievements for the removal of arsenic, fluoride, and iron from contaminated drinking water.