Cysteine-Silver-Polymer Systems for the Preparation of Hydrogels and Films with Potential Applications in Regenerative Medicine

Herein, the problem concerning the poorer mechanical properties of gels based on low molecular weight gelators (LMWGs)-L-cysteine and silver nitrate-was solved by the addition of various polymers-polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG)-to the initial cysteine-silver sol (CSS). The physicochemical methods of analysis-viscosimetry, UV spectroscopy, DLS, and SEM-identified that cysteine-silver hydrogels (CSG) based on PVA possess the best rheological properties and porous microstructure (the average pore size is 2-10 µm) compared to gels without the polymer or with PVP or PEG. Such gels are able to form cysteine-silver cryogels (CSC) and then porous cysteine-silver films (CSF) with an average pore size of 10-20 µm and good mechanical, swelling, and adhesion to skin characteristics as long as the structure of CSS particles remains stable. In vitro experiments have shown that hydrogels are non-toxic to normal human fibroblast cells. The obtained materials could potentially be applied to regenerative medicine.

Polyvinyl Alcohol-Chitosan Scaffold for Tissue Engineering and Regenerative Medicine Application: A Review

Tissue engineering and regenerative medicine (TERM) holds great promise for addressing the growing need for innovative therapies to treat disease conditions. To achieve this, TERM relies on various strategies and techniques. The most prominent strategy is the development of a scaffold. Polyvinyl alcohol-chitosan (PVA-CS) scaffold emerged as a promising material in this field due to its biocompatibility, versatility, and ability to support cell growth and tissue regeneration. Preclinical studies showed that the PVA-CS scaffold can be fabricated and tailored to fit the specific needs of different tissues and organs. Additionally, PVA-CS can be combined with other materials and technologies to enhance its regenerative capabilities. Furthermore, PVA-CS represents a promising therapeutic solution for developing new and innovative TERM therapies. Therefore, in this review, we summarized the potential role and functions of PVA-CS in TERM applications.

A Brief Review of Poly(Vinyl Alcohol)-Based Anion Exchange Membranes for Alkaline Fuel Cells

Anion exchange membrane fuel cells have unique advantages and are thus gaining increasing attention. Poly(vinyl alcohol) (PVA) is one of the potential polymers for the development of anion exchange membranes. This review provides recent studies on PVA-based membranes as alternative anion exchange membranes for alkaline fuel cells. The development of anion exchange membranes in general, including the types, materials, and preparation of anion exchange membranes in the last years, are discussed. The performances and characteristics of recently reported PVA-based membranes are highlighted, including hydroxide conductivity, water uptake, swelling degree, tensile strength, and fuel permeabilities. Finally, some challenging issues and perspectives for the future study of anion exchange membranes are discussed.

Fabrication and evaluation of melamine-formaldehyde resin crosslinked PVA composite coating membranes with enhanced oxygen barrier properties for food packaging

Since PVA membrane is of limited use for food packaging applications in moist conditions, polyvinyl alcohol/melamine-formaldehyde resin (PVA/MF) composite coating membranes with various contents of MF were fabricated by a chemical crosslinking method to reduce the sensitivity of PVA to moisture. The morphology, chemical structure, thermal and mechanical properties of the resultant PVA/MF composite coating membranes were characterized by scanning electron microscopy (SEM), FT-IR spectrometer, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), differential scanning calorimeter (DSC) and universal testing machine. In addition, their hazes and OTRs were also measured as a function of MF content. Experimental results showed that –OH in the molecular chain of MF and PVA could be crosslinked at room temperature to form a dense polymeric structure, resulting in the increase in viscosity and the decline in water absorption. The incorporation of MF into PVA gave rise to the enhancement of crosslinking through the C–O–C bonding and strong interface interaction between MF and PVA that was beneficial to improving its thermal stability, mechanical properties and barrier properties. Furthermore, the PVA/MF composite coating membranes exhibited superior transparency due to their good leveling and wettability on both BOPET and PLA substrates. The moisture resistance and barrier properties of the MF/PVA composite coated BOPET and PLA membranes under high humidity conditions have been greatly improved, and the oxygen transmission rates (OTRs) under 75% RH could still remain at about 1.0 cm³ per m² per day. These characteristics of the PVA/MF composite coating membranes have made them exhibit widespread application prospects for coating membranes in the food packaging field.

Since PVA membrane is limited use for food packaging applications in moist conditions, PVA/MF composite coating membranes with various contents of MF were fabricated by a chemical crosslinking method to reduce the sensitivity of PVA to moisture.

Pervaporation of Aqueous Ethanol Solutions through Rigid Composite Polyvinyl-Alcohol/Bacterial Cellulose Membranes

The paper focuses on synthesis, characterization and testing in ethanol-water separation by pervaporation of new membrane types based on polyvinyl alcohol (PVA) and bacterial cellulose (BC). A technology for obtaining these membranes deposited on a ceramic support is presented in the experimental section. Three PVA-BC composite membranes with different BC content were obtained and characterized by FTIR, SEM and optic microscopy. The effects of operating temperature (40–60 °C), permeate pressure (18.7–37.3 kPa) and feed ethanol concentration (24–72%wt) on total permeate flow rate (0.09–0.23 kg/m2/h) and water/ethanol selectivity (5–23) were studied based on an appropriate experimental plan for each PVA-BC membrane. Statistical models linking the process factors to pervaporation performances were obtained by processing the experimental data. Ethanol concentration of the processed mixture had the highest influence on permeate flow rate, an increase in ethanol concentration leading to a decrease in the permeate flow rate. All 3 process factors and their interactions had positive effects on membrane selectivity. Polynomial regression models were used to assess the effect of BC content in the dried membrane on pervaporation performances. Values of process performances obtained in this study indicate that these membranes could be effective for ethanol-water separation by pervaporation.

Chemically and Thermally Crosslinked PVA-Based Membranes: Effect on Swelling and Transport Behavior

The novel poly(vinyl alcohol) (PVA)-based membranes were prepared using the two-step crosslinking approach: the chemical crosslinking of PVA using sulfosuccinic acid (SSA) (0-50 wt.%) and the thermal treatment (120-160 °C). The membrane composition and crosslinking temperature were optimized in terms of the mechanical and transport properties. The FTIR-ATR analysis revealed that the increase of the SSA concentration and crosslinking temperature resulted in the rise of the ester bond bands intensity due to the esterification reaction between PVA and SSA. As a consequence, the PVA-based membrane with 50 wt % SSA and crosslinked at 140 °C showed the reduced Young's modulus (from 1266.2 MPa to 1.4 MPa) and elongation at break (from 316% to 66%) in comparison with the pure PVA membrane. The studied swelling behavior of the obtained membranes revealed significantly higher water sorption than that in methanol and propal-2-ol whatever the crosslinking temperature. The performed studies provide a new way of tailoring the membrane physicochemical properties, in particular, the surface hydrophilicity. In addition, the obtained results are crucial for the design and elaboration of the polymer membranes for the pervaporative separation of the liquid-liquid mixtures, in particular, for the alcohol dehydration.

Review: Membrane Materials for the Removal of Water from Industrial Solvents by Pervaporation and Vapor Permeation

Organic solvents are widely used in a variety of industrial sectors. Reclaiming and reusing the solvents may be the most economically and environmentally beneficial option for managing spent solvents. Purifying the solvents to meet reuse specifications can be challenging. For hydrophilic solvents, water must be removed prior to reuse, yet many hydrophilic solvents form hard-to-separate azeotropic mixtures with water. Such mixtures make separation processes energy intensive and cause economic challenges. The membrane processes pervaporation (PV) and vapor permeation (VP) can be less energy intensive than distillation-based processes and have proven to be very effective in removing water from azeotropic mixtures. In PV/VP, separation is based on the solution-diffusion interaction between the dense permselective layer of the membrane and the solvent/water mixture. This review provides a state-of-the-science analysis of materials used as the selective layer(s) of PV/VP membranes in removing water from organic solvents. A variety of membrane materials, such as polymeric, inorganic, mixed matrix, and hybrid, have been reported in the literature. A small subset of these are commercially available and highlighted here: poly(vinyl alcohol), polyimides, amorphous perfluoro polymers, NaA zeolites, chabazite zeolites, T-type zeolites, and hybrid silicas. The typical performance characteristics and operating limits of these membranes are discussed. Solvents targeted by the U.S. Environmental Protection Agency for reclamation are emphasized and ten common solvents are chosen for analysis: acetonitrile, 1-butanol, N,N-dimethyl formamide, ethanol, methanol, methyl isobutyl ketone, methyl tert-butyl ether, tetrahydrofuran, acetone, and 2-propanol.

Development and Characterization of New Pervaporation PVA Membranes for the Dehydration Using Bulk and Surface Modifications

In the present work, the novel dense and supported membranes based on polyvinyl alcohol (PVA) with improved transport properties were developed by bulk and surface modifications. Bulk modification included the blending of PVA with chitosan (CS) and the creation of a mixed-matrix membrane by introduction of fullerenol. This significantly altered the internal structure of PVA membrane, which led to an increase in permeability with high selectivity to water. Surface modification of the developed modified dense membranes, based on composites PVA-CS and PVA-fullerenol-CS, was performed through (i) making of a supported membrane with a thin selective composite layer and (ii) applying of the layer-by-layer assembly (LbL) method for coating of nano-sized polyelectrolyte (PEL) layers to increase the membrane productivity. The nature of polyelectrolyte type-(poly(allylamine hydrochloride) (PAH), poly(sodium 4-styrenesulfonate) (PSS), poly(acrylic acid) (PAA), CS), and number of PEL bilayers (2⁻10)-were studied. The structure of the composite membranes was investigated by FTIR, X-ray diffraction, and SEM. Transport properties were studied during the pervaporation separation of 80% isopropanol⁻20% water mixture. It was shown that supported membrane consisting of hybrid layer of PVA-fullerenol (5%)⁻chitosan (20%) with five polyelectrolyte bilayers (PSS, CS) deposited on it had the best transport properties.

Mixed matrix membranes (MMMs) for ethanol purification through pervaporation: current state of the art

Over the last few decades, different polymers have been employed as materials in membrane preparation for pervaporation (PV) application, which are currently used in the preparation of mixed matrix membranes (MMMs) for ethanol recovery and ethanol dehydration. The ethanol-water and water-ethanol mixtures are, in fact, the most studied PV systems since the bioethanol production is strongly increasing its demand. The present review focuses on the current state of the art and future trends on ethanol purification by using MMMs in PV. A particular emphasis will, therefore, be placed on the enhancement of specific components transport and selectivity through the incorporation of inorganic materials into polymeric membranes, mentioning key principles on suitable filler selection for a synergistic effect toward such separations. In addition, the following topics will be discussed: (i) the generalities of PV, including the theoretical aspects and its role in separation; (ii) a general overview of the methodologies for the preparation of MMMs; and (iii) the most recent findings based on MMMs for both ethanol recovery and ethanol dehydration for better evolution in the field. From the last decade of literature inputs, the poly(vinyl alcohol) has been the most used polymeric matrix targeting ethanol dehydration, while the zeolites have been the most used embedded materials. Today, the latest developments on MMM preparation declare that the future efforts will be directed to the chemical modification of polymeric materials as well as the incorporation of novel fillers or enhancing the existing ones through chemical modification.