Fabrication of superhydrophobic electrospun polyimide nanofibers modified with polydopamine and polytetrafluoroethylene nanoparticles for oil–water separation

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

Two-step facile fabrication of superamphiphilic biomimic membrane with micro-nano structure for oil-water emulsion separation on-demand

Superamphiphilic materials have attracted much attention due to their different wettability in different media. Through a simple two-step method, we fabricated a smart separation membrane with super-amphiphilic wettability. Under the...

Polyimide based super-wettable membranes/materials for high performance oil/water mixture and emulsion separation: A review

This article reviews the application of highly heat and pressure resistant polyimide material for the development of membranes/materials that exhibit unique super-wettability, the characteristics pivotal for the efficient separation of oil-water mixture and emulsion. The polymerization of imide monomer in polyimide brings about the required porosity in the material, which in turn renders the crucial surface roughness, which is instrumental for establishing the desired super-wettability on the polyimide based membrane materials, in addition to the mechanical and thermal robustness. The membrane as the oil-water filtering medium can be either oil passing or water passing depends on the individual wettability of the membrane surface for oil and water, which in turn depend on the respective solid-liquid interfacial energy and the hierarchical surface roughness. Superhydrophobic/superoleophobic wetting characteristic of the surface repels water and allows oil to pass through the membrane medium, and the major disadvantage of this kind of oil/water separation is the rapid oil fouling of the membrane pores and the consequent less efficiency for oil water separation. On the other hand, the membrane surface engineered to have the Superhydrophilic/underwater superoleophobic wetting characteristics can be water passing, and the easy fouling of the membrane surface can be minimized. In the case of polyimide materials, there are lot of scopes to engineer the physical properties like surface energy and surface roughness of the membrane surface in order to obtain the required wettability. There have been many works focused on the application of different variants of polyimide materials for developing membrane for oil water separation. In this review, we present an itemized review of various works on polyimide materials based oil/water separation in terms of chemical, physical, structural and surface characteristics of the material.

Multifunctional Applications of Blow-Spinning Setaria viridis Structured Fibrous Membranes in Water Purification

With increasing water pollution and human health problems caused by oily wastewater, the fabrication of oil-water separation materials has become an urgent task. However, most of the reported materials have a single function and poor performance. In this paper, a multifunctional zinc oxide/polyaniline/polyacrylonitrile (ZnO/PANI/PAN) nanofibrous membrane with needle-like ZnO nanorods was prepared by in situ synthesis of PANI and a hydrothermal reaction on a highly stable self-standing PAN blow-spinning fibrous membrane. Due to the electronic synergistic effect of ZnO and PANI, the fibrous membrane exhibits excellent antibacterial activity and visible-light degradation ability of organic dyes. Moreover, the micro-/nanosized pores of the ZnO/PANI/PAN fibrous membranes also guarantee its excellent emulsion separation performance, including an ultrahigh surfactant-free emulsion permeate flux (∼8597.40 L/(m² h)), ultrahigh surfactant-stabilized emulsion permeate flux (∼2253.50 L/(m² h)), and excellent separation efficiency (above 99%). Furthermore, the composite membrane maintains stable underwater superoleophobicity and hydrophilicity under adverse conditions, shows good biological safety, and is harmless to the water environment. These excellent properties endow the ZnO/PANI/PAN nanofibrous membranes with great potential in treating oily wastewater.

Preparation of 3D-printed (Cs/PLA/PU) scaffolds modified with plasma and hybridization by Fe@PEG-CA for treatment of cardiovascular disease

One usage of tissue engineering is cells cultured on a 3D porous polymeric scaffold that is embedded in the body as tissue.

Air-Stable Aerophobic Polydimethylsiloxane Tube with Efficient Self-Removal of Air Bubbles

The adherence of underwater air bubbles to surfaces is a serious cause of malfunction in applications such as microfluidics, transport, and space devices. However, realizing spontaneous and additional unpowered transport of underwater air bubbles inside tubes remains challenging. Although superhydrophilic polydimethylsiloxane (PDMS) tubes are attracting attention as air bubble repellents, superhydrophilic PDMS, which is fabricated via oxygen plasma treatment, has a disadvantage in that it is weak against aging. Here, we present a tube with the ability to self-remove air bubbles, which overcomes the drawback of rapid aging. PDMS containing Silwet L-77 with a hierarchical nano-microstructure exhibiting subaqueous aerophobicity was fabricated. We conducted adherence and saturation experiments of air bubbles using the fabricated PDMS tube with Silwet L-77 to investigate the mechanism of bubbles adhering to and separating from the fabricated tube surface. The developed PDMS with Silwet L-77 exhibits a strong self-removal effect with an air bubble removal of 97.7%. The adherence and saturation experiments suggest that the transparent superhydrophilic-underwater aerophobic PDMS is a potentially exceptional tool for spontaneously separating air bubbles attached to tube surfaces.

Assembly of Polyacrylamide-Sodium Alginate-Based Organic-Inorganic Hydrogel with Mechanical and Adsorption Properties

Hydrogels have been widely used in water purification. However, there is not much discussion and comparison about the effects of different nanofillers on the reinforcement and adsorption performances of hydrogels, which can be subjected to rapid water flow and possess strong adsorption ability. In this work, polyacrylamide (PAAM)-sodium alginate (SA) interpenetrating polymer network-structured hydrogels were prepared by in situ polymerization. PAAM formed the first flexible network and SA constructed the second rigid network. Three kinds of inorganic nanoparticles including carbon nanotubes (CNTs), nanoclays (NCs), and nanosilicas (NSs) were incorporated into a PAAM-SA matrix via hydrogen bond. The obtained hydrogels exhibited a macroporous structure with low density (≈1.4 g/cm³) and high water content (≈83%). Compared with neat PAAM-SA, the hydrogels with inorganic nanoparticles possessed excellent mechanical strengths and elasticities, and the compression strength of PAAM-SA-NS reached up to 1.3 MPa at ε = 60% by adding only 0.036 g NS in a 30 g polymer matrix. However, CNT was the best filler to improve the adsorption capacity owing to its multi-walled hollow nanostructure, and the adsorption capacity of PAAM-SA-CNT was 1.28 times higher than that of PAAM-SA. The prepared hydrogels can be potential candidates for use as absorbents to treat wastewater.