Citrate-modified bacterial cellulose as a potential scaffolding material for bone tissue regeneration

Bacterial cellulose (BC) is a novel biocompatible polymeric biomaterial with a wide range of biomedical uses, like tissue engineering (TE) scaffolds, wound dressings, and drug delivery. Although BC lacks good cell adhesion due to limited functionality, its tunable surface chemistry still holds promise. Here, hydroxyapatite (HA) was incorporated into a citrate-modified BC (MBC) using the biomimetic synthesis in simulated body fluid (SBF). Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), thermal gravimetric analysis (TGA), and compressive modulus were used to characterize the biomineralized MBC (BMBC) samples. Using 3-(4,5 dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl) -2H-tetrazolium (MTS), trypan blue dye exclusion (TBDE), and cell attachment assays on osteoblast cells, the developed BMBC have shown good cell viability, proliferation, and attachment after 3, 5, and 7 days of culture and therefore suggested as potential bone tissue regeneration scaffolding material.

Advances in machine learning-enhanced nanozymes

Nanozymes, synthetic nanomaterials that mimic the catalytic functions of natural enzymes, have emerged as transformative technologies for biosensing, diagnostics, and environmental monitoring. Since their introduction, nanozymes have rapidly evolved with significant advancements in their design and applications, particularly through the integration of machine learning (ML). Machine learning (ML) has optimized nanozyme efficiency by predicting ideal size, shape, and surface chemistry, reducing experimental time and resources. This review explores the rapid advancements in nanozyme technology, highlighting the role of ML in improving performance across various bioapplications, including real-time monitoring and the development of chemiluminescent, electrochemical and colorimetric sensors. We discuss the evolution of different types of nanozymes, their catalytic mechanisms, and the impact of ML on their property optimization. Furthermore, this review addresses challenges related to data quality, scalability, and standardization, while highlighting future directions for ML-driven nanozyme development. By examining recent innovations, this review highlights the potential of combining nanozymes with ML to drive the development of next-generation diagnostic and detection technologies.

Applications of selected polysaccharides and proteins in dentistry: A review

In the last ten years, remarkable characteristics and a variety of functionalities have been created in biopolymeric materials for clinical dental applications. This review gives an overview of current knowledge of natural biopolymers (biological macromolecules) in terms of structural, functional, and property interactions. Natural biopolymers such as polysaccharides (chitosan, bacterial cellulose, hyaluronic acid, and alginate) and polypeptides (collagen and silk fibroin) have been discussed for dental uses. These biopolymers exhibit excellent properties alone and when employed with other composite molecules making them ideal for treatment of periodontitis, endodontics, dental pulp regeneration and oral wound healing. These biopolymers together with the composite materials exhibit better biocompatibility, inertness, elasticity and flexibility which makes them a leading candidate to be used for other dental applications like caries management, oral appliances, dentures, dental implants and oral surgeries.

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

New materials' synthesis and utilization have shown many critical challenges in healthcare and other industrial sectors as most of these materials are directly or indirectly developed from fossil fuel resources. Environmental regulations and sustainability concepts have promoted the use of natural compounds with unique structures and properties that can be biodegradable, biocompatible, and eco-friendly. In this context, nanocellulose (NC) utility in different sectors and industries is reported due to their unique properties including biocompatibility and antimicrobial characteristics. The bacterial nanocellulose (BNC)-based materials have been synthesized by bacterial cells and extracted from plant waste materials including pineapple plant waste biomass. These materials have been utilized in the form of nanofibers and nanocrystals. These materials are found to have excellent surface properties, low density, and good transparency, and are rich in hydroxyl groups for their modifications to other useful products. These materials are well utilized in different sectors including biomedical or health care centres, nanocomposite materials, supercapacitors, and polymer matrix production. This review explores different approaches for NC production from pineapple waste residues using biotechnological interventions, approaches for their modification, and wider applications in different sectors. Recent technological developments in NC production by enzymatic treatment are critically discussed. The utilization of pineapple waste-derived NC from a bioeconomic perspective is summarized in the paper. The chemical composition and properties of nanocellulose extracted from pineapple waste may have unique characteristics compared to other sources. Pineapple waste for nanocellulose production aligns with the principles of sustainability, waste reduction, and innovation, making it a promising and novel approach in the field of nanocellulose materials.

Effect of Alkaline Treatment on Mechanical and Thermal Properties of Miswak (Salvadora persica) Fiber-Reinforced Polylactic Acid

This study examines the effects of alkaline treatment on the mechanical and thermal properties of miswak fiber-reinforced polylactic acid. The treatment was performed with three distinct concentrations of sodium hydroxide (NaOH): 1 wt %, 2 wt %, and 3 wt %. The difficulties of interaction between the surface of the fiber and the matrix, which led to this treatment, is caused by miswak fiber's hydrophilic character, which impedes its ability to bind with hydrophobic polylactic acid. FTIR, tensile, TGA, and DMA measurements were used to characterize the composite samples. A scanning electron microscope (SEM) was used to examine the microstructures of many broken samples. The treatment is not yet especially effective in enhancing interfacial bonding, as seen by the uneven tensile strength data. The effect of the treated fiber surface significantly improves the tensile strength of miswak fiber-reinforced PLA composites. Tensile strength improves by 18.01%, 6.48%, and 14.50%, respectively, for 1 wt %, 2 wt %, and 3 wt %. Only 2 wt %-treated fiber exhibits an increase of 0.7% in tensile modulus. The modulus decreases by 4.15 % at 1 wt % and by 19.7% at 3 wt %, respectively. The TGA curve for alkali-treated fiber composites demonstrates a slight increase in thermal stability when compared to untreated fiber composites at high temperatures. For DMA, the composites with surface treatment have higher storage moduli than the composite with untreated miswak fiber, especially for the PLA reinforced with 2 wt % alkali miswak fiber, proving the effectiveness of the treatment.

Recent trends in carbon nanotube (CNT)-based biosensors for the fast and sensitive detection of human viruses: a critical review

The current COVID-19 pandemic, with its numerous variants including Omicron which is 50-70% more transmissible than the previously dominant Delta variant, demands a fast, robust, cheap, and easily deployed identification strategy to reduce the chain of transmission, for which biosensors have been shown as a feasible solution at the laboratory scale. The use of nanomaterials has significantly enhanced the performance of biosensors, and the addition of CNTs has increased detection capabilities to an unrivaled level. Among the various CNT-based detection systems, CNT-based field-effect transistors possess ultra-sensitivity and low-noise detection capacity, allowing for immediate analyte determination even in the presence of limited analyte concentrations, which would be typical of early infection stages. Recently, CNT field-effect transistor-type biosensors have been successfully used in the fast diagnosis of COVID-19, which has increased research and commercial interest in exploiting current developments of CNT field-effect transistors. Recent progress in the design and deployment of CNT-based biosensors for viral monitoring are covered in this paper, as are the remaining obstacles and prospects. This work also highlights the enormous potential for synergistic effects of CNTs used in combination with other nanomaterials for viral detection.

Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.

Can TEMPO-Oxidized Cellulose Nanofibers Be Used as Additives in Bio-Based Building Materials? A Preliminary Study on Earth Plasters

Interest towards cellulose nanofibers obtained from virgin and waste sources has seen a significant growth, mainly thanks to the increasing sensitivity towards the concept of circular economy and the high levels of paper recycling achieved in recent years. Inspired by the guidelines of the green building industry, this study proposes the production and characterization of TEMPO-oxidized and homogenized cellulose nanofibers (TOHO CNF) from different sources and their use as additives for earth plasters on two different raw earth samples, characterized by geotechnical laboratory tests and mineralogical analysis: a high-plasticity clay (T2) and a medium-compressibility silt (ABS). Original sources, including those derived from waste (recycled cardboard and paper mill sludge), were characterized by determining chemical content (cellulose versus ashes and lignin) and fiber morphology. TOHO CNF derived from the different sources were compared in terms of nanofibers medium diameter, crystallinity degree, thermal decomposition and oxidation degree, that is the content of carboxylic groups per gram of sample. Then, a preliminary analysis of the influence of CNF on earth plasters is examined. Adhesion and capillary absorption tests highlighted the effect of such nanofibers on blends in function of two factors, namely the cellulose original source and the oxidation degree of the fibers. In particular, for both earth samples, T2 and ABS, a significant increase in adhesion strength was observed in the presence of some TOHO CNF additives. As far as capillary sorption tests, while an undesired increase in water adsorption was detected for T2 compared to the control, in the case of ABS, a significant reduction in water content was measured by adding TOHO CNF derived from recycled sources. These results pave the way for further in-depth investigation on the role of TOHO CNF as additives for earth plasters.

Design of biomass-based renewable materials for environmental remediation

Various materials have been used to remove environmental contaminants for decades and have been an effective strategy for environmental cleanups. The current nonrenewable materials used for this purpose could impose secondary hazards and challenges in further downstream treatments. Biomass-based materials present viable, renewable, and sustainable solutions for environmental remediation. Recent biotechnology advances have developed biomaterials with new capacities, such as highly efficient biodegradation and treatment train integration. This review systemically discusses how biotechnology has empowered biomass-derived and bioinspired materials for environmental remediation sustainably and cost-effectively.

Sustainable environmental remediation via biomimetic multifunctional lignocellulosic nano-framework

Chemical pollution threatens human health and ecosystem sustainability. Persistent organic pollutants (POPs) like per- and polyfluoroalkyl substances (PFAS) are expensive to clean up once emitted. Innovative and synergistic strategies are urgently needed, yet process integration and cost-effectiveness remain challenging. An in-situ PFAS remediation system is developed to employ a plant-derived biomimetic nano-framework to achieve highly efficient adsorption and subsequent fungal biotransformation synergistically. The multiple component framework is presented as Renewable Artificial Plant for In-situ Microbial Environmental Remediation (RAPIMER). RAPIMER exhibits high adsorption capacity for the PFAS compounds and diverse adsorption capability toward co-contaminants. Subsequently, RAPIMER provides the substrates and contaminants for in situ bioremediation via fungus Irpex lacteus and promotes PFAS detoxification. RAPIMER arises from cheap lignocellulosic sources, enabling a broader impact on sustainability and a means for low-cost pollutant remediation.

Persistent organic pollutant (POP) remediation is important for protecting the environment and human health but can be expensive. Here, the authors report on the creation of a plant-based remediation material which can absorb high levels of POPs and then provide the nutrients needed for fungal degradation and detoxification.

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L^-1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches.

Development of dual crosslinked mumio-based hydrogel dressing for wound healing application: Physico-chemistry and antimicrobial activity

In this study, an antimicrobial mumio-based hydrogel dressing was developed for wound healing application. The mechanism of gel formation was achieved via a double crosslink network formation between gelatin (GT) and polyvinyl alcohol (PVA) using polyethylene glycol diglycidyl ether (PEGDE) and borax as crosslinking agents. To enhance the mechanical integrity of the hydrogel matrix, bacterial cellulose (BC) was integrated into the GT-PVA hydrogel to produce a composite gel dressing. The obtained hydrogel was characterized by FTIR, SEM, TGA, and XRD. Gel fraction, in vitro swelling and degradation as well as compressive modulus properties of the gel dressing were investigated as a function of change in PVA and BC ratios. By increasing the ratios of PVA and BC, the composite dressing showed lower swelling but higher mechanical strength. Comparing to other formulations, the gel with 4 %w/v PVA and 1 %w/v BC demonstrated to be most suitable in terms of stability and mechanical properties. In vitro cell cytotoxicity by MTT assay on human alveolar basal epithelial (A549) cell lines validated the gels as non-toxic. In addition, the mumio-based gel was compared to other formulations containing different bioactive agents of beeswax and cinnamon oil, which were tested for microbial growth inhibition effects against different bacteria (S. aureus and K. pneumoniae) and fungi (C. albicans and A. niger) strains. Results suggested that the gel dressing containing combinations of mumio, beeswax and cinnamon oil possess promising future in the inhibition of microbial infection supporting its application as a suitable dressing for wound healing.

Comparative Life Cycle Assessment of Cellulose Nanofibres Production Routes from Virgin and Recycled Raw Materials

Nanocellulose-based materials are attracting an increasing interest for the positive role they could play in sustainable development; being originated from renewable resources. Moreover, cellulose has a high potential of recycling from both post-consumer waste and industrial waste. Both factors, i.e., recyclability and renewable resources; results are also extremely favourable in the perspective of circular economy. Despite all these positive aspects, an industrial production has yet to start. At the lab scale, many preparation methods of cellulose nanofibres (CNF) are available; here, the three most common are analysed: (1) enzymatic pre-treatment followed by homogenisation (ENZHO), (2) oxidative pre-treatment combined with homogenisation (TOHO) or (3) oxidative pre-treatment followed by sonication (TOSO). All three processes have been experimentally carried out starting from both virgin and recycled cellulose from industrial waste sludge. The environmental sustainability of these three routes is estimated by the Life Cycle Assessment (LCA) using experimental lab scale data. In this scenario, the comparative LCA has pointed out a superior performance of the ENZHO process, followed by TOHO and, lastly, by TOSO. The influence of energy consumption on the final results has been further investigated by a sensitivity analysis, showing that the TOHO and TOSO routes could reach similar performances by scaling-up the process from the laboratory. The different typology of CNF obtained by conducting the ENZHO process with respect to the TEMPO-mediated oxidation approach is also outlined as an additional element to be considered for the final selection of a suitable process.

Nanocellulose from various biomass wastes: Its preparation and potential usages towards the high value-added products

Biomass waste comes from a wide range of sources, such as forest, agricultural, algae wastes, as well as other relevant industrial by-products. It is an important alternative energy source as well as a unique source for various bioproducts applied in many fields. For the past two decades, how to reuse, recycle and best recover various biomass wastes for high value-added bioproducts has received significant attention, which has not only come from various academia communities but also from many civil and medical industries. To summarize one of the cutting-edge technologies applied with nanocellulose biomaterials, this review focused on various preparation methods and strategies to make nanocellulose from diverse biomass wastes and their potential applications in biomedical areas and other promising new fields.

Preparation and Characterization of Nonwoven Fibrous Biocomposites for Footwear Components

Chromium-tanned leathers used in the manufacture of footwear and leather goods pose an environmental problem because they contain harmful chemicals and are very difficult to recycle. A solution to this problem can be composite materials from tree leaves, fruit residues and other fibrous agricultural products, which can replace chromium-tanned leather. The present study describes the preparation of biocomposite leather-like materials from microbial cellulose and maple leave fibers as bio-fillers. The formulation was optimized by design of experiment and the prepared biocomposites characterized by tensile test, FTIR, DMA, SEM, adhesion test, volume porosity, water absorptivity, surface wettability and shape stability. From the viewpoint of future use in the footwear industry, results obtained showed that the optimized material was considerably flexible with tensile strength of 2.13 ± 0.29 MPa, elastic modulus of 76.93 ± 1.63 MPa and porosity of 1570 ± 146 mL/min. In addition, the material depicted good shape stability and surface adhesive properties. The results indicate that a suitable treatment of biomass offers a way to prepare exploitable nonwoven fibrous composites for the footwear industry without further burdening the environment.

Silver Nanoparticles for Water Pollution Monitoring and Treatments: Ecosafety Challenge and Cellulose-Based Hybrids Solution

Silver nanoparticles (AgNPs) are widely used as engineered nanomaterials (ENMs) in many advanced nanotechnologies, due to their versatile, easy and cheap preparations combined with peculiar chemical-physical properties. Their increased production and integration in environmental applications including water treatment raise concerns for their impact on humans and the environment. An eco-design strategy that makes it possible to combine the best material performances with no risk for the natural ecosystems and living beings has been recently proposed. This review envisages potential hybrid solutions of AgNPs for water pollution monitoring and remediation to satisfy their successful, environmentally safe (ecosafe) application. Being extremely efficient in pollutants sensing and degradation, their ecosafe application can be achieved in combination with polymeric-based materials, especially with cellulose, by following an eco-design approach. In fact, (AgNPs)-cellulose hybrids have the double advantage of being easily produced using recycled material, with low costs and possible reuse, and of being ecosafe, if properly designed. An updated view of the use and prospects of these advanced hybrids AgNP-based materials is provided, which will surely speed their environmental application with consequent significant economic and environmental impact.

Naturally derived nano- and micro-drug delivery vehicles: halloysite, vaterite and nanocellulose

We discuss prospects for halloysite nanotubes, vaterite crystals and nanocellulose to enter the market of biomaterials for drug delivery and tissue engineering, and their potential for economically viable production from abundant natural sources.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Cellulose Fibers Hydrophobization via a Hybrid Chemical Modification

The following article highlights the importance of an indispensable process in cellulose fibers (UFC100) modification which may change the biopolymer properties-drying. The reader is provided with a broad range of information considering the drying process consequences on the chemical treatment of the cellulose. This research underlines the importance of UFC100 moisture content reduction considering polymer composites application with the employment of a technique different than thermal treating. Therefore, a new hybrid chemical modification approach is introduced. It consists of two steps: solvent exchange (with ethanol either hexane) and chemical treatment (maleic anhydride-MA). With the use of Fourier-transform infrared spectroscopy (FT-IR), it has been proven that the employment of different solvents may contribute to the higher yield of the modification process as they cause rearrangements in hydrogen bonds structure, swell the biopolymer and, therefore, affect its molecular packing. Furthermore, according to the thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), the improvement in fibers thermal resistance was noticed, e.g., shift in the value of 5% temperature mass loss from 240 °C (regular modification) to 306 °C (while solvent employed). Moreover, the research was broadened with cellulose moisture content influence on the modification process-tested fibers were either dried (D) or not dried (ND) before the hybrid chemical treatment. According to the gathered data, D cellulose exhibits elevated thermal resistance and ND fibers are more prone to the MA modification. What should be emphasized, in the case of all carried out UFC100 treatments, is that a decrease in moisture contend was evidenced-from approximately 4% in case of thermal drying to 1.7% for hybrid chemical modification. This is incredibly promising considering the possibility of the treated fibers application in polymer matrix.

Integrated Coagulation-Membrane Processes with Zero Liquid Discharge (ZLD) Configuration for the Treatment of Oil Sands Produced Water

This study explores the feasibility of implementing five hybrid coagulation-membrane processes for the treatment of the boiler blow-down (BBD) water from an oil sands steam assisted gravity drainage (SAGD) operation. The processes involved (1) direct nanofiltration (NF) of the BBD water, (2) pre-treatment of the NF retentate using ion exchanger regeneration wastewater (IERW) as a chemical coagulant followed by NF, (3) pre-treatment of BBD water using IERW followed by NF, (4) dual pre-treatment of BBD water using IERW and soda ash (sodium carbonate, Na2CO3) followed by NF, and (5) forward osmosis (FO) treatment of the BBD water using IERW as a draw solution followed by NF treatment of diluted draw solution. These scenarios were compared based on total flux decline ratio (DRt), flux recovery ratio (FRR), and total dissolved solids (TDS) removal over the final NF treatment to suggest an efficient treatment technique to avoid an undesired increase in the capital and operating expenses. It was found that process-1 provided the highest selectivity toward dissolved solids (80%) with a flux decline and recovery ration of 89.6% and 97.4%, respectively. Considering the permeation flux, process-4 exhibited the lowest flux decline (86.1%) and highest recovery ratio (97.5%) compared to other processes, proving the successful role of soda ash softening, as a chemical pretreatment method, in improving the performance of membrane filtration. Process-2 presented a mediocre performance with DRt, FRR, and TDS rejection of 93.3%, 97.3%, and 74%, respectively. Finally, process-3 and process-5 showed the lowest performance among all the scenarios with low flux recovery and low permeability, respectively. In addition, process-3 was expected to be cost-efficient since it only uses an on-site generated waste as a coagulant for the chemical pretreatment of the membrane filtration unit. The optimum scenario was proposed to be the two-stage membrane process, with direct NF of BBD followed by the post-treatment of the retentate via a hybrid chemical conditioning using IERW and soda ash softening, followed by a second NF. Overall, this integrated process offered a highly efficient mean with a zero liquid discharge (ZLD) system for the treatment of high pH wastewaters into an uncontaminated stream for the boilers.