Gelatin supports with immobilized laccase as sustainable biocatalysts for water treatment

Enzymatic degradation of tetracycline by Trametes versicolor laccase in a fluidized bed reactor

Laccase from Trametes Versicolor was successfully immobilized on gelatin beads by a crosslinking reaction with glutaraldehyde. Immobilized laccases showed better stability towards pH and temperature than free laccases. Moreover, the immobilized laccases retained a good relative activity of 85 % after 20 days of storage at 4 °C. The degradation of tetracycline (TC) was studied with immobilized enzymes in both batch and fluidized bed reactors (FBR). The average degradation rate (1.59 mg h-1 Uenzymes-1) estimated over 24 h in the FBR was almost 5 times higher than in the stirred tank reactor. Maximum degradation rate achieved was 72 ± 1 % with a circulation flow rate of 80 mL min-1 and addition of air at a flowrate of 15 mL min-1. Study of the stability of the active beads under reaction conditions, shows that 45 % of the TC was degraded after 5 cycles of 24 h each. The toxicity of the TC solution before and after treatment was also investigated with microtox assays.

The controlled degradation of bacterial cellulose in simulated physiological environment by immobilization and release of cellulase

Bacterial cellulose (BC) has good network structure, biocompatibility, and excellent mechanical properties, and is widely used in the field of biomaterials. The controllable degradation of BC can further broaden its application. Oxidative modification and cellulases may endow BC with degradability, but these methods inevitably lead to the obvious reduction of its initial mechanical properties and uncontrolled degradation. In this paper, the controllable degradation of BC was realized for the first time by using a new controlled release structure that combines the immobilization and release of cellulase. The immobilized enzyme has higher stability and is gradually released in the simulated physiological environment, and its load can control the hydrolysis rate of BC well. Furthermore, the BC-based membrane prepared by this method retains the favorable physicochemical performance of the original BC, including flexibility and great biocompatibility, and holds good application prospects in drug control release or tissue repair.

Optimized Peppermint Essential Oil Microcapsules Loaded into Gelatin-Based Cryogels with Enhanced Antimicrobial Activity

In this study, chitosan (Chi) was used to microencapsulate peppermint essential oil (PEO). A novel gelatin-based cryogel loaded with PEO microcapsules was further developed and characterized for potential applications. Four different cryogel systems were designed, and the morphological, molecular, physical and antibacterial properties were investigated. Additionally, the antimicrobial properties of PEO, alone and microcapsulated, incorporated into the cryogel network were evaluated. The observed gel structure of cryogels exhibited a highly porous morphology in the microcapsules. The highest values of the equilibrium swelling ratio were acquired for the GelCryo-ChiCap and GelCryo-PEO@ChiCap samples. The contact angle GelCryo-PEO@ChiCap sample was lower than the control (GelCryo) due to the water repelling of the essential oil. It has been found that the incorporation of encapsulated PEO into the cryogels would be more advantageous compared to its direct addition. Moreover, GelCryo-PEO@ChiCap cryogels showed the strongest antibacterial activities, especially against Staphylococcus aureus (Gram-positive bacteria) and Escherichia coli (Gram-negative bacteria). The system that was developed showed promising results, indicating an improved antibacterial efficacy and enhanced structural properties due to the presence of microcapsules. These findings suggest that the system may be an appropriate candidate for various applications, including, but not limited to, drug release, tissue engineering, and food packaging. Finally, this system demonstrates a strategy to stabilize the releasing of the volatile compounds for creating successful results.

Recent advances in polymer composite, extraction, and their application for wastewater treatment: A review

Wastewater from diverse industrial sectors, agricultural practices and other household activities causes water pollution that result in different environmental issues. The main goals of wastewater treatment are typically to enhance the purity of wastewater and to enable the disposal of domestic and industrial effluents without endangering human health or causing excessive environmental issues. There were several natural and synthetic materials which have been utilized for wastewater treatment, amongst them polymers gain more importance due to their non-toxicity, economic feasibility, abundant availability of sources, renewability, biocompatibility, biodegradability, etc. The organic polymers such as cellulose, chitin, gelatin, alginates, lignin, dextran and other starch derivatives are the most commonly used natural polymers in wastewater treatments. The unique physical and chemical characteristics of the natural polymers make them become an alternative in wastewater treatments such as membrane filtration, adsorption, coagulation, flocculation and ion-exchange process to remove harmful contaminants such as toxic metals, dyes, medicines, pesticides, and so on. The review article discusses natural polymers and related uses in wastewater treatment. This review mainly focused on the wastewater treatment using natural polymers and the techniques involved for their extraction from natural sources. The recent trends in polymer extraction from the natural sources and the scope for the future research of natural polymers in various sectors are also discussed in detail.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

Medical Use of Polycatecholamines + Oxidoreductases-Modified Curdlan Hydrogels-Perspectives

Curdlan (β-1,3-glucan), as a biodegradable polymer, is still an underestimated but potentially attractive matrix for the production of dressing materials. However, due to its lack of susceptibility to functionalization, its use is limited. The proposed curdlan modification, using a functional polycatecholamine layer, enables the immobilization of selected oxidoreductases (laccase and peroxidase) on curdlan hydrogel. The following significant changes of biological and mechanical properties of polycatecholamines + oxidoreductases-modified matrices were observed: reduced response of human monocytes in contact with the hydrogels, modulated reaction of human blood, in terms of hemolysis and clot formation, and changed mechanical properties. The lack of toxicity towards human fibroblasts and the suppression of cytokines released by human monocytes in comparison to pristine curdlan hydrogel, seems to make the application of such modifications attractive for biomedical purposes. The obtained results could also be useful for construction of a wide range of biomaterials based on other polymer hydrogels.

Magnetic casein aggregates as an innovative support platform for laccase immobilization and bioremoval of crystal violet

In this study, casein@CoFe₂O₄ was fabricated through a green synthesis methodology and applied to immobilize laccase. The constructed casein@CoFe₂O₄ exhibited porous structures with distinct cavities and suitable magnetic properties. The abundance of aromatic functional groups on the surface renneted casein and possible π-type interaction between laccase and para-κ-casein resulted in a successful immobilization. The biocatalyst retained 50% of its initial activity after 24 reusability cycles, indicating stable immobilization of laccase onto the casein microstructures. The stability of laccase after immobilization was improved by 300% in comparison with the free enzyme, especially in basic pH values. The constructed laccase@casein@CoFe₂O₄ was then incorporated to remove crystal violet (CV) as an environmentally harmful synthetic tri-phenylmethane dye. The prepared heterogeneous biocatalyst effectively diminished the antimicrobial activity of CV up to 81.3% in 40 min against some bacterial strains, resulting from the formation of more minor toxic metabolites identified by liquid chromatography coupled with mass spectroscopy after degradation procedure. The proposed green and feasible method for the preparation of magnetic casein aggregates has not been previously reported. The incorporation of casein, which acted as a molecular chaperon, resulted in a significant improvement in the enzymatic stability and exhibited appropriate reusability for the constructed biocatalytic system.

Recent environmental applications of and development prospects for immobilized laccase: a review

Laccases have enormous potential as promising 'green' biocatalysts in environmental applications including wastewater treatment and polluted soil bioremediation. The catalytic oxidation reaction they perform uses only molecular oxygen without other cofactors, and the only product after the reaction is water. The immobilization of laccase offers several improvements such as protected activity and enhanced stability over free laccase. In addition, the reusability of immobilized laccase is adistinct advantage for future applications. This review covers the sources of and progress in laccase research, and discusses the different methodologies of laccase immobilization that have emerged in the recent 5-10 years, as well as its applications to environmental fields, and evaluates these emerging technologies. Abbreviations: (2,4,6-TCP): 2,4,6-trichlorophenol; (2,4-DCP): 2,4-dichlorophenol; (ABTS), 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid); (ACE), acetaminophen; (BC-AS), almond shell; (BC-PM), pig manure; (BC-PW), pine wood; (BPA), bisphenol A; (BPA), bisphenol A; (BPF), bisphenol F; (BPS), bisphenol S; (C₆₀), fullerene; (Ca-AIL), calcium-alginate immobilized laccase; (CBZ), carbamazepine; (CETY), cetirizine; (CHT-PGMA-PEI-Cu (II) NPs), Cu (II)-chelated chitosan nanoparticles; (CLEAs), cross-linked enzyme aggregates; (CMMC), carbon-based mesoporous magnetic composites; (COD), chemical oxygen demand; (CPH), ciprofloxacin hydrochloride; (CS), chitosan; (CTC), chlortetracycline; (Cu-AIL), copper-alginate immobilized laccase; (DBR K-4BL), Drimarene brilliant red K-4BL; (DCF), diclofenac; (E1),estrone; (E2), 17 β-estradiol; (EDC), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride; (EDCs), endocrine disrupting chemicals; (EE2), 17α-ethinylestradiol; (EFMs), electrospun fibrous membranes; (FL), free laccase; (fsMP), fumed silica microparticles; (GA-CBs), GLU-crosslinked chitosan beads; (GA-CBs), glutaraldehyde-crosslinked chitosan beads; (GA-Zr-MOF), graphene aerogel-zirconium-metal organic framework; (GLU), glutaraldehyde; (GO), graphene oxide; (HMCs), hollow mesoporous carbon spheres; (HPEI/PES), hyperbranched polyethyleneimine/polyether sulfone; (IC), indigo carmine; (IL), immobilized laccase; (k_cat), catalytic constant; (K_m), Michealis constant; (M-CLEAs), Magnetic cross-linked enzyme aggregates; (MMSNPs-CPTS-IDA-Cu²⁺), Cu²⁺-chelated magnetic mesoporous silica nanoparticles; (MSS), magnetic mesoporous silica spheres; (MWNTs), multi-walled carbon nanotubes; (MWNTs), multi-walled carbon nanotubes; (NHS), N-hydroxy succinimide; (O-MWNTs), oxidized-MWNTs; (P(AAm-NIPA)), poly(acrylamide-N-isopropylacrylamide); (p(GMA)), poly(glycidyl methacrylate); (p(HEMA)), poly(hydroxyethyl methacrylate); (p(HEMA-g-GMA)-NH₂, poly(glycidyl methacrylate) brush grafted poly(hydroxyethyl methacrylate); (PA6/CHIT), polyamide 6/chitosan; (PAC), powdered active carbon; (PAHs), polycyclic aromatic hydrocarbons; (PAM-CTS), chitosan grafted polyacrylamide hydrogel; (PAN/MMT/GO), polyacrylonitrile/montmorillonite/graphene oxide; (PAN/PVdF), polyacrylonitrile/polyvinylidene fluoride; (PEG), poly ethylene glycol; (PEI), Poly(ethyleneimine); (poly(4-VP)), poly(4-vinyl pyridine); (poly(GMA-MAA)), poly(glycidyl methacrylate-methacrylic acid); (PVA), polyvinyl alcohol; (RBBR), Remazol Brilliant Blue R; (SDE), simulated dye effluent; (semi-IPNs), semi-interpenetrating polymer networks; (TC), tetracycline; (TCH), tetracycline hydrochloride; (TCS), triclosan; (Vmax), maximum activity; (Zr-MOF, MMU), micro-mesoporous Zr-metal organic framework.