Beta cyclodextrin modified polyvinylidene fluoride adsorptive mixed matrix membranes for removal of Congo red

Bio-based adsorption foam composed of MOF and polyethyleneimine-modified cellulose for selective anionic dye removal

With the increase of sustainable development goal, the bio-based adsorption materials with high and selective dye removal are important for water treatment in the dyeing industry. In this paper, a bio-based adsorption foam composed of metal-organic frameworks (MOF) and polyethyleneimine (PEI)-modified cellulose was prepared by a three-step process, i.e., PEI modification of cellulose fibers (PC), MOF decoration of PEI-modified cellulose (MIL-53@PC), and in-situ foaming with polyurethane. PEI modification provides cellulose fiber with more active sites for both dye adsorption and MOF bonding. We found that MIL-53 crystals were tightly bonded on the surface of PC through hydrogen bonding. Because of the abundant adsorption sites (e.g., amines, iron oxide group), the MIL-53@PC demonstrated high adsorption capacity and selectivity for anionic dye (e.g., 936.5 mg/g for methyl orange) through electrostatic interaction and hydrogen bonding. Finally, MIL-53@PC particles were blended with a waterborne polyurethane prepolymer to prepare a three-dimensional hydrophilic foam (MIL-53@PC/PUF), which not only maintained high adsorption capacity and selectivity of MIL-53@PC and also improved its recyclability and reusability. The MIL-53@PC/PUF offers a promising solution for dye wastewater treatment.

Comparative analysis of the equilibrium, kinetics, and characterization of the mechanism of rapid adsorption of Congo red on nano-biosorbents based on agricultural waste in industrial effluents

This study aims to remove Congo red dye from industrial effluent using economical agriculturally-based nano-biosorbents like magnetic orange peel, peanut shells, and tea waste. The nano-biosorbents were characterized by various analytical techniques like SEM, FT-IR, BET and XRD. The highest adsorption capacity was obtained under the following ideal conditions: pH = 6 (orange peel and peanut shells), pH = 3 (tea waste), and dosages of nano-biosorbents with varying timeframes of 50 min for tea waste and peanut shells and 30 min for orange peel. The study found that tea waste had the highest removal rate of 94% due to its high porosity and responsible functional groups, followed by peanut shells at 83% and orange peel at 68%. The Langmuir isotherm model was found to be the most suitable, with R2 values of 0.99 for tea waste, 0.92 for orange peel, and 0.71 for peanut shells. On the other hand, a pseudo-second-order kinetic model was very feasible, showing an R2 value of 0.99 for tea waste, 0.98 for peanut shells and 0.97 for orange peel. The significance of the current study lies in its practical application, enabling efficient waste management and water purification, thereby preserving a clean and safe environment.

Role of Membrane-Solute Affinity Interactions in Carbamazepine Rejection and Resistance to Organic Fouling by Nano-Engineered UF/PES Membranes

In this study, polyethersulfone (PES) ultrafiltration (UF) membranes were modified with GO, Ag, ZnO, Ag-GO and ZnO-GO nanoparticles to improve carbamazepine removal and fouling prevention by making membrane surfaces more hydrophilic. The fabricated membranes were characterized for surface and cross-sectional morphology, surface roughness and zeta potential, as well as hydrophilicity, functional groups, surface tension parameters and water permeability Thereafter, the membranes were evaluated for their efficiency in removing MgSO4 and carbamazepine as well as antifouling properties. To understand the role of affinity interactions in rejection and fouling, membrane-solute adhesion energies (∆Gslm) were quantified based on the Lifshitz-van der Waals/acid-base method. Unlike previous studies, which have generalized fouling prevention to be due to improvements in hydrophilicity upon adding nanoparticles, this work further explored the role of surface tension components on rejection and fouling prevention. The addition of nanoparticles improved membrane hydrophilicity (77-62°), water permeability (11.9-17.7 Lm-2 h-1 bar-1), mechanical strength (3.46-4.11 N/mm2), carbamazepine rejection (30-85%) and fouling prevention (60-23% flux decline). Rejection and antifouling properties increased as ∆Gslm became more repulsive (i.e., less negative). Membrane modification reduced irreversible fouling, and the fouled membranes were cleaned by flushing with water. Fouling related more to membrane electron donor components (γ-), while the roles of electron acceptor (γ+) and Lifshitz-van der Waals components (γLW) were less important. This work provides more insights into the role of affinity interactions in rejection and fouling and how rejection and fouling mechanisms change with nanoparticle addition.