Mechanism of calcification: role of collagen fibrils and collagen-phosphoprotein complexes in vitro and in vivo

STMP and PVPA as Templating Analogs of Noncollagenous Proteins Induce Intrafibrillar Mineralization of Type I Collagen via PCCP Process

The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.

Permanent and decidua dentition as chronological biomarkers of heavy metal contamination: A review of the forensic literature

STATEMENT OF PROBLEM

Contamination with heavy metals (HM) has great environmental consequences in the environment due to lack of biodegradation, in addition, accumulation in living beings causes defects in tissues and organs, deteriorating their function and inducing a wide spectrum of diseases. Human biomonitoring consists of the periodic measurement of a certain chemical substance or metabolite in a particular population, using matrices that can be acute or chronic. Teeth are chronic matrices that have great characteristics of resistance and chronological storage of information. This review aims to identify the mechanisms, spatial location, and affinity of HM within teeth, along with understanding its applicability as a chronological record matrix in the face of HM contamination.

MATERIAL AND METHODS

A systematic search review was performed using the PubMed/Medline, Web of Science, and Scopus metasearch engines, and the terms "teeth" OR "dental" OR "tooth" AND "heavy metals" were intersected. Complete articles are included in Spanish, English and Portuguese without time restrictions, involving studies in humans or in vitro; Letters to the editor, editorials and those that did not refer to information on the incorporation and relationship of HM with the teeth were excluded.

RESULTS

837 published articles were detected, 91 were adjusted to the search objective, and 6 were manually included. Teeth are structures with a great capacity for information retention in the face of HM contamination due to low physiological turnover and their long processes of marked formations by developmental biorhythm milestones such as the neonatal line (temporal reference indicator). The contamination mechanisms inside the tooth are linked to the affinity of hydroxyapatite for HM; this incorporation can be in the soft matrix during the apposition phase or as part of the chemical exchanges between hydroxyapatite and the elements of the environment.

CONCLUSION

The teeth present unique characteristics of great resistance and affinity for HM, as well as a chronological biomarker for human biomonitoring, so they can be used as means of expertise or evidence to confirm or rule out a fact of environmental characteristics in the legal field.

Lipids and Minerals, Interplay in Biomineralization: Nature's Alchemy

The main focus of this article is the role of lipids in biomineralization. Much of the discussion on biomineralization focuses on proteins in these decades. Indeed, collagen and acidic noncollagenous proteins effectively serve as templates for mineralization. However, other macromolecules such as lipids and polysaccharides have received less attention despite their abundance at mineralization sites. The matrix vesicle (MV) theory is widely accepted as the induction of early mineralization. Although ion concentration within the vesicles has been discussed in the initial mineralization in this theory, the role of phospholipids that constitute the vesicle membrane has not been discussed much. Comprehensive considerations, including pathological mineralization, exist regardless of the localization of MVs, the involvement of bacteria in dental calculus formation, and biomineralization caused by marine organisms such as corals, suggesting that initial mineralization found in these biological conditions might be a common reaction relating to lipids. In contrast, despite the abundance of lipids, mineralization occurs only in the limited tissue within our body. In other words, gathering knowledge and creating a path to understanding about lipid-based mineralization is extremely important in proposing new bone disease treatment methods. This article describes how lipids influence nucleation, mineralization, and expansion during hard tissue formation.

Skeletal calcification patterns of batoid, teleost, and mammalian models: Calcified cartilage versus bone matrix

This study compares the skeletal calcification pattern of batoid Raja asterias with the endochondral ossification model of mammalians Homo sapiens and teleost Xiphias gladius. Skeletal mineralization serves to stiffen the mobile elements for locomotion. Histology, histochemistry, heat deproteination, scanning electron microscopy (SEM)/EDAX analysis, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared spectrometry (FTIR) have been applied in the study. H. sapiens and X. gladius bone specimens showed similar profiles, R. asterias calcified cartilage diverges for higher water release and more amorphous bioapatite. In endochondral ossification, fetal calcified cartilage is progressively replaced by bone matrix, while R. asterias calcified cartilage remains un-remodeled throughout the life span. Ca2+ and PO4 3- concentration in extracellular matrix is suggested to reach the critical salts precipitation point through H2 O recall from extracellular matrix into both chondroblasts or osteoblasts. Cartilage organic phase layout and incomplete mineralization allow interstitial fluids diffusion, chondrocytes survival, and growth in a calcified tissue lacking of a vascular and canalicular system. HIGHLIGHTS: Comparative physico-chemical characterization (TGA, DTG and DSC) testifies the mass loss due to water release, collagen and carbonate decomposition of the three tested matrices. R. asterias calcified cartilage water content is higher than that of H. sapiens and X. gladius, as shown by the respectively highest dehydration enthalpy values. Lower crystallinity degree of R. asterias calcified cartilage can be related to the higher amount of collagen in amorphous form than in bone matrix. These data can be discussed in terms of the mechanostat theory (Frost, 1966) or by organic/inorganic phase transformation in the course evolution from fin to limbs. Mineral analysis documented different charactersof R. asterias vs H. sapiens and X. gladius calcified matrix.

Research progress of biomimetic materials in oral medicine

Biomimetic materials are able to mimic the structure and functional properties of native tissues especially natural oral tissues. They have attracted growing attention for their potential to achieve configurable and functional reconstruction in oral medicine. Though tremendous progress has been made regarding biomimetic materials, significant challenges still remain in terms of controversy on the mechanism of tooth tissue regeneration, lack of options for manufacturing such materials and insufficiency of in vivo experimental tests in related fields. In this review, the biomimetic materials used in oral medicine are summarized systematically, including tooth defect, tooth loss, periodontal diseases and maxillofacial bone defect. Various theoretical foundations of biomimetic materials research are reviewed, introducing the current and pertinent results. The benefits and limitations of these materials are summed up at the same time. Finally, challenges and potential of this field are discussed. This review provides the framework and support for further research in addition to giving a generally novel and fundamental basis for the utilization of biomimetic materials in the future.

Secondary ion mass spectrometry for bone research

The purpose of this Tutorial is to highlight the suitability of time-of-flight secondary ion mass spectrometry (ToF-SIMS) and OrbiTrap™ SIMS (Orbi-SIMS) in bone research by introducing fundamentals and best practices of bone analysis with these mass spectrometric imaging (MSI) techniques. The Tutorial includes sample preparation, determination of best-suited measurement settings, data acquisition, and data evaluation, as well as a brief overview of SIMS applications in bone research in the current literature. SIMS is a powerful analytical technique that allows simultaneous analysis and visualization of mineralized and nonmineralized bone tissue, bone marrow as well as implanted biomaterials, and interfaces between bone and implants. Compared to histological staining, which is the standard analytical procedure in bone research, SIMS provides chemical imaging of nonstained bone sections that offers insights beyond what is conventionally obtained. The Tutorial highlights the versatility of ToF- and Orbi-SIMS in addressing important questions in bone research. By illustrating the value of these MSI techniques, it demonstrates how they can contribute to advance progress in bone research.

Time-dependent structural changes and hypermineralisation of artificially demineralised dentine following treatment with silver diammine fluoride and glass ionomer cement

OBJECTIVES

This study aimed to evaluate the change of mineral content in dentine lesions over time and examine the effectiveness of the combined treatment with silver diammine fluoride (SDF) and glass ionomer cement (GIC).

METHODS

Sixty bovine dentine specimens were divided into 4 groups: cont, Fuji, Safo, and Safo+Fuji. The specimens were imaged and measured using microcomputed tomography (microCT) at 7 time points: pre-demineralisation, after demineralisation for two weeks, immediately after treatment, 1 week, 2 weeks, 1 month, and 3 months after treatment. The 3-month group was evaluated with a light microscope, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and scanning electron microscope (SEM)/energy-dispersive X-ray spectroscopy (EDS). Data were analysed by Dunn's test and Wilcoxon signed rank test with Bonferroni correction for microCT, and Kruskal-Wallis test and two-way analysis of variance for EDS characterisation.

RESULTS

MicroCT images showed high mineral density beneath dentine lesions in Safo+Fuji. The mineral density at 600 μm in Safo+Fuji increased significantly over time, while Safo showed an opposite trend (adjusted p<0.005). In Safo+Fuji, EDS revealed significantly high energy of fluorine (p<0.05, at 300 μm) and a tendency towards high energy of calcium (p>0.05). However, Safo+Fuji showed lower energy of silver compared to Safo (p<0.001). ATR-FTIR revealed that phosphate groups had the highest peak at a depth between 300 and 400 μm in Safo+Fuji.

CONCLUSIONS

Safo+Fuji was effective in remineralising the deep lesion in dentine after one and three months, and a hypermineralisation zone generated beneath the lesion demonstrated additional benefit in this study.

CLINICAL SIGNIFICANCE

This long-term in vitro study showed that SDF+GIC treatment could strengthen the structure of decayed teeth when applied in the treatment of patients with advanced rampant caries.

Important roles of odontoblast membrane phospholipids in early dentin mineralization

The objective of this study was to first identify the timing and location of early mineralization of mouse first molar, and subsequently, to characterize the nucleation site for mineral formation in dentin from a materials science viewpoint and evaluate the effect of environmental cues (pH) affecting early dentin formation. Early dentin mineralization in mouse first molars began in the buccal central cusp on post-natal day 0 (P0), and was first hypothesized to involve collagen fibers. However, elemental mapping indicated the co-localization of phospholipids with collagen fibers in the early mineralization area. Co-localization of phosphatidylserine and annexin V, a functional protein that binds to plasma membrane phospholipids, indicated that phospholipids in the pre-dentin matrix were derived from the plasma membrane. A 3-dimensional in vitro biomimetic mineralization assay confirmed that phospholipids from the plasma membrane are critical factors initiating mineralization. Additionally, the direct measurement of the tooth germ pH, indicated it to be alkaline. The alkaline environment markedly enhanced the mineralization of cell membrane phospholipids. These results indicate that cell membrane phospholipids are nucleation sites for mineral formation, and could be important materials for bottom-up approaches aiming for rapid and more complex fabrication of dentin-like structures.

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

Biomimetic materials for better bone graft substitutes are a thrust area of research among researchers and clinicians. Autografts, allografts, and synthetic grafts are often utilized to repair and regenerate bone defects. Autografts are still considered the gold-standard method/material to treat bone-related issues with satisfactory outcomes. It is important that the material used for bone tissue repair is simultaneously osteoconductive, osteoinductive, and osteogenic. To overcome this problem, researchers have tried several ways to develop different materials using chitosan-based nanocomposites of silver, copper, gold, zinc oxide, titanium oxide, carbon nanotubes, graphene oxide, and biosilica. The combination of materials helps in the expression of ideal bone formation genes of alkaline phosphatase, bone morphogenic protein, runt-related transcription factor-2, bone sialoprotein, and osteocalcin. In vitro and in vivo studies highlight the scientific findings of antibacterial activity, tissue integration, stiffness, mechanical strength, and degradation behaviour of composite materials for tissue engineering applications.

Design Strategies and Biomimetic Approaches for Calcium Phosphate Scaffolds in Bone Tissue Regeneration

Bone is a complex biologic tissue, which is extremely relevant for various physiological functions, in addition to movement, organ protection, and weight bearing. The repair of critical size bone defects is a still unmet clinical need, and over the past decades, material scientists have been expending efforts to find effective technological solutions, based on the use of scaffolds. In this context, biomimetics which is intended as the ability of a scaffold to reproduce compositional and structural features of the host tissues, is increasingly considered as a guide for this purpose. However, the achievement of implants that mimic the very complex bone composition, multi-scale structure, and mechanics is still an open challenge. Indeed, despite the fact that calcium phosphates are widely recognized as elective biomaterials to fabricate regenerative bone scaffolds, their processing into 3D devices with suitable cell-instructing features is still prevented by insurmountable drawbacks. With respect to biomaterials science, new approaches maybe conceived to gain ground and promise for a substantial leap forward in this field. The present review provides an overview of physicochemical and structural features of bone tissue that are responsible for its biologic behavior. Moreover, relevant and recent technological approaches, also inspired by natural processes and structures, are described, which can be considered as a leverage for future development of next generation bioactive medical devices.

Molecular dynamic simulation of prenucleation of apatite at a type I collagen template: ion association and mineralization control

Biomineralization is a vital physiological process in living organisms, hence elucidating its mechanism is crucial in the optimization of controllable biomaterial preparation with hydroxyapatite and collagen, which could provide information for the design of innovative biomaterials. However, the mechanisms by which minerals and collagen interact in various ionic environments are unclear. Here, we applied molecular dynamics and free energy simulations to clarify type I collagen-mediated HAP prenucleation and simulated the physiological environment using different phosphate and carbonate protonation states. Calcium phosphate mineral formation on the type I collagen surface drastically differed among various H₂PO₄^-, HPO₄^2-, PO₄^3-, CO₃^2-, and HCO₃^- compositions. Our simulations indicated that the presence of HPO₄^2- in the solution phase is critical to regulate the apatite nucleation, whereas the presence of H₂PO₄^- may be inhibitory. The inclusion of CO₃^2- in the solution might promote calcium phosphate cluster formation. In contrast, apatite cluster size may be regulated by changing the anion concentration ratios, including PO₄^3-/HPO₄^2- and PO₄^3-/CO^32-. Our free energy simulations attributed these phenomena to relative differences in binding thermostability and ion association kinetics. Our simulations provide a theoretical approach toward the effective control of collagen mineralization and the preparation of novel biomaterials.

Electrical waveform dependent osteogenesis on PVDF/BaTiO3 composite using a customized and programmable cell stimulator

Directing cellular functionalities using biomaterial-based bioelectronic stimulation remains a significant constraint in translating research outcomes to address specific clinical challenges. Electrical stimulation is now being clinically used as a therapeutic treatment option to promote bone tissue regeneration and to improve neuromuscular functionalities. However, the nature of the electrical waveforms during the stimulation and underlying biophysical rationale are still not scientifically well explored. Furthermore, bone-mimicking implant-based bioelectrical regulation of osteoinductivity has not been translated to clinics. The present study demonstrates the role of the waveform in electrical signal to direct differentiation of stem cells on an electroactive polymeric substrate, using monophasic DC, square wave, and biphasic wave. In this regard, an in-house electrical stimulation device has been fabricated for the uninterrupted delivery of programmed electrical signals to stem cells in culture. To provide a functional platform for stem cells to differentiate, barium titanate (BaTiO₃ , BT) reinforced PVDF has been developed with mechanical properties similar to bone. The electrical stimulation of human mesenchymal stem cells (hMSCs) on PVDF/BT composite inhibited proliferation rate at day 7, indicating early commitment for differentiation. The phenotypical characteristics of DC stimulated hMSCs provided signatures of differentiation towards osteogenic lineage, which was subsequently confirmed using ALP assay, collagen deposition, matrix mineralization, and genetic expression. Our findings suggest that DC stimulation induced early osteogenesis in hMSCs with a higher level of intracellular reactive oxygen species (ROS), whereas the stimulation with square wave directed late osteogenesis with a lower ROS regeneration. In summary, the present study critically analyzes the role of electrical stimulation and its waveforms in regulating osteogenesis, without external biochemical differentiation inducers, on a bone-mimicking functional substrate. Such a strategy can potentially be adopted to develop orthopedic implant-based bioelectronic medicine for bone regeneration. This article is protected by copyright. All rights reserved.

Characteristics of Biodegradable Gelatin Methacrylate Hydrogel Designed to Improve Osteoinduction and Effect of Additional Binding of Tannic Acid on Hydrogel

In this study, a hydrogel using single and double crosslinking was prepared using GelMA, a natural polymer, and the effect was evaluated when the double crosslinked hydrogel and tannic acid were treated. The resulting hydrogel was subjected to physicochemical property evaluation, biocompatibility evaluation, and animal testing. The free radicals generated through APS/TEMED have a scaffold form with a porous structure in the hydrogel, and have a more stable structure through photo crosslinking. The double crosslinked hydrogel had improved mechanical strength and better results in cell compatibility tests than the single crosslinked group. Moreover, in the hydrogel transplanted into the femur of a rat, the double crosslinked group showed an osteoinductive response due to the attachment of bone minerals after 4 and 8 weeks, but the single crosslinked group did not show an osteoinductive response due to rapid degradation. Treatment with a high concentration of tannic acid showed significantly improved mechanical strength through H-bonding. However, cell adhesion and proliferation were limited compared to the untreated group due to the limitation of water absorption capacity, and no osteoinduction reaction was observed. As a result, it was confirmed that the treatment of high-concentration tannic acid significantly improved mechanical strength, but it was not a suitable method for improving bone induction due to the limitation of water absorption.

A repeated triple lysine motif anchors complexes containing bone sialoprotein and the type XI collagen A1 chain involved in bone mineralization

While details remain unclear, initiation of woven bone mineralization is believed to be mediated by collagen and potentially nucleated by bone sialoprotein (BSP). Interestingly, our recent publication showed that BSP and type XI collagen form complexes in mineralizing osteoblastic cultures. To learn more, we examined the protein composition of extracellular sites of de novo hydroxyapatite deposition which were enriched in BSP and Col11a1 containing an alternatively spliced "6b" exonal sequence. An alternate splice variant "6a" sequence was not similarly co-localized. BSP and Col11a1 co-purify upon ion-exchange chromatography or immunoprecipitation. Binding of the Col11a1 "6b" exonal sequence to bone sialoprotein was demonstrated with overlapping peptides. Peptide 3, containing three unique lysine-triplet sequences, displayed the greatest binding to osteoblastic cultures; peptides containing fewer lysine triplet motifs or derived from the "6a" exon yielded dramatically lower binding. Similar results were obtained with 6-carboxyfluorescein (FAM)-conjugated peptides and western blots containing extracts from osteoblastic cultures. Mass spectroscopic mapping demonstrated that FAM-peptide 3 bound to 90 kDa BSP and its 18 to 60 kDa fragments, as well as to 110 kDa nucleolin. In osteoblastic cultures, FAM-peptide 3 localized to biomineralization foci (site of BSP) and to nucleoli (site of nucleolin). In bone sections, biotin-labeled peptide 3 bound to sites of new bone formation which were co-labeled with anti-BSP antibodies. These results establish the fluorescent peptide 3 conjugate as the first nonantibody-based method to identify BSP on western blots and in/on cells. Further examination of the "6b" splice variant interactions will likely reveal new insights into bone mineralization during development.

Decellularized tissue-engineered heart valves calcification: what do animal and clinical studies tell us?

Cardiovascular diseases are the first cause of death worldwide. Among different heart malfunctions, heart valve failure due to calcification is still a challenging problem. While drug-dependent treatment for the early stage calcification could slow down its progression, heart valve replacement is inevitable in the late stages. Currently, heart valve replacements involve mainly two types of substitutes: mechanical and biological heart valves. Despite their significant advantages in restoring the cardiac function, both types of valves suffered from serious drawbacks in the long term. On the one hand, the mechanical one showed non-physiological hemodynamics and the need for the chronic anticoagulation therapy. On the other hand, the biological one showed stenosis and/or regurgitation due to calcification. Nowadays, new promising heart valve substitutes have emerged, known as decellularized tissue-engineered heart valves (dTEHV). Decellularized tissues of different types have been widely tested in bioprosthetic and tissue-engineered valves because of their superior biomechanics, biocompatibility, and biomimetic material composition. Such advantages allow successful cell attachment, growth and function leading finally to a living regenerative valvular tissue in vivo. Yet, there are no comprehensive studies that are covering the performance of dTEHV scaffolds in terms of their efficiency for the calcification problem. In this review article, we sought to answer the question of whether decellularized heart valves calcify or not. Also, which factors make them calcify and which ones lower and/or prevent their calcification. In addition, the review discussed the possible mechanisms for dTEHV calcification in comparison to the calcification in the native and bioprosthetic heart valves. For this purpose, we did a retrospective study for all the published work of decellularized heart valves. Only animal and clinical studies were included in this review. Those animal and clinical studies were further subcategorized into 4 categories for each depending on the effect of decellularization on calcification. Due to the complex nature of calcification in heart valves, other in vitro and in silico studies were not included. Finally, we compared the different results and summed up all the solid findings of whether decellularized heart valves calcify or not. Based on our review, the selection of the proper heart valve tissue sources (no immunological provoking residues), decellularization technique (no damaged exposed residues of the decellularized tissues, no remnants of dead cells, no remnants of decellularizing agents) and implantation techniques (avoiding suturing during the surgical implantation) could provide a perfect anticalcification potential even without in vitro cell seeding or additional scaffold treatment.

The role of organic phosphate in the spatial control of periodontium complex bio-mineralization: an in vitro study

The periodontal structure is a particularly exquisite model of hierarchical spatial control of mineralization. Extracellular matrix control in the selective mineralization of the periodontium complex remains elusive since the extracellular matrix is a set of mineralization promoters and inhibitors. The phosphorylated proteins, which are ubiquitous in the extracellular matrix of the periodontium complex, are well-documented as primary factors in the regulation of tissue mineralization. Whether organic phosphates are key regulators in defining the interfaces between dentin, cementum, periodontal ligament and alveolar bone is an issue worthy of research. Here, we investigated the in vitro remineralization process of demineralized and dephosphorylated periodontal tissue sections. When exposed to a metastable mineralization solution, a large number of calcospherulites deposited on the surface of the dephosphorylated sections and the tissue selective mineralization were disrupted. Interestingly, on adding a dentin matrix protein-1 analogue named polyacrylic acid, the surface mineralization rate in the dephosphorylated periodontal complex reduced dramatically. In contrast, hierarchical mineralization was displayed by the demineralized section at the tissue collagen fibrillar levels in both alveolar bone and dentin regions. These results demonstrated that the organic phosphate could prevent surface mineral deposition, and the minerals could penetrate the collagen fibrils to initiate a selective and hierarchal tissue mineralization with the assistance of the dentin matrix protein-1 analogue in the periodontal complex. This study enhances our understanding of the mineralization discrepancy in the periodontal tissues, which will provide some insight into the development of biomaterials for the regeneration of soft-hard tissue interfaces.

New insights into ToF-SIMS imaging in osteoporotic bone research

The present work focuses on the application of time-of-flight secondary ion mass spectrometry (ToF-SIMS) in osteoporotic bone research. In order to demonstrate the benefit, the authors present concrete application examples of ToF-SIMS in three different areas of bone research. ToF-SIMS as a mass spectrometric imaging technique allows simultaneous visualization of mineralized and nonmineralized bone tissue as well as implanted biomaterials and bone implant interphases. In the first example, the authors show that it is possible to study the incorporation and distribution of different components released from bone filler materials into bone with a single mass spectrometric measurement. This not only enables imaging of nonstained bone cross sections but also provides further insights beyond histologically obtained information. Furthermore, they successfully identified several mass fragments as markers for newly formed cartilage tissue and growth joint in bone. Different modes of ToF-SIMS as well as different SIMS instruments (IONTOF's TOF.SIMS 5 and M6 Hybrid SIMS, Ionoptika's J105) were used to identify these mass signals and highlight the high versatility of this method. In the third part, bone structure of cortical rat bone was investigated from bone sections embedded in technovit (polymethyl methacrylate, PMMA) and compared to cryosections. In cortical bone, they were able to image different morphological features, e.g., concentric arrangement of collagen fibers in so-called osteons as well as Haversian canals and osteocytes. In summary, the study provides examples of application and shows the strength of ToF-SIMS as a promising analytical method in the field of osteoporotic bone research.

The structure of cortical bone as revealed by the application of methods for the calcified matrix study

Calcination and decalcification are basic procedures useful to a morphological approach of a biological, composite material like cortical bone. The study was carried out on a whole human femur conserved in liquid (from an educational collection). Cortical fracturing and SEM observation of vascular canals surface collagen texture was used to study bone deproteination at scalar temperatures (400-1,200°C) and acid bone decalcification at crescent time intervals. Heating burned and vaporized the organic matrix with shrinkage of the bone specimens as documented by the weight loss and transverse surface morphometry. SEM showed a pattern of aligned spherulites at 400°C which maintained the collagen fibrils layout (like a mineral cast), followed by a spherulites fusion progression with the temperature increments. At 1200°C a crystalline-like structure of tightly-packed trapezohendron units. XRD analysis supported the SEM morphology displaying the complete Debey rings of hydroxyapatite and spotted Debey rings of withlockite. Surface Ca and P elution was documented after 12 hr of exposition to the acid solution by dissolution of spherulites and the whole canal surface decalcified in depth after 15 days by SEM-EDAX analysis. The periodic pattern of collagen fibrils was still evident up to 15 days of decalcification together with fine granular deposits of a not-collagenic proteic material, while after 30 days no period was observed in the decalcified fibrils. Collagen mineral cast at 400°C calcination. Complete crystalline transformation at 1200°C. Up to 15 days of decalcification fibrils period maintained.

Pathological calcification in osteoarthritis: an outcome or a disease initiator?

In the progression of osteoarthritis, pathological calcification in the affected joint is an important feature. The role of these crystallites in the pathogenesis and progression of osteoarthritis is controversial; it remains unclear whether they act as a disease initiator or are present as a result of joint damage. Recent studies reported that the molecular mechanisms regulating physiological calcification of skeletal tissues are similar to those regulating pathological or ectopic calcification of soft tissues. Pathological calcification takes place when the equilibrium is disrupted. Calcium phosphate crystallites are identified in most affected joints and the presence of these crystallites is closely correlated with the extent of joint destruction. These observations suggest that pathological calcification is most likely to be a disease initiator instead of an outcome of osteoarthritis progression. Inhibiting pathological crystallite deposition within joint tissues therefore represents a potential therapeutic target in the management of osteoarthritis.

Newly formed and remodeled human bone exhibits differences in the mineralization process

During human skeletal growth, bone is formed via different processes. Two of them are: new bone formation by depositing bone at the periosteal (outer) surface and bone remodeling corresponding to a local renewal of tissue. Since in remodeling formation is preceded by resorption, we hypothesize that modeling and remodeling could require radically different transport paths for ionic precursors of mineralization. While remodeling may recycle locally resorbed mineral, modeling implies the transport over large distances to the site of bone apposition. Therefore, we searched for potential differences of size, arrangement and chemical composition of mineral particles just below surfaces of modeling and remodeling sites in femur midshaft cross-sections from healthy children. These bone sites were mapped using scanning synchrotron X-ray scattering, Raman microspectroscopy, energy dispersive X-ray analysis and quantitative backscattered electron microscopy. The results show clear differences in mineral particle size and composition between the sites, which cannot be explained by a change in the rate of mineral apposition or accumulation. At periosteal modeling sites, mineral crystals are distinctly larger, display higher crystallinity and exhibit a lower calcium to phosphorus ratio and elevated Na and Mg content. The latter may originate from Mg used for phase stabilization of mineral precursors and therefore indicate different time periods for mineral transport. We conclude that the mineralization process is distinctively different between modeling and remodeling sites due to varying requirements for the transport distance and, therefore, the stability of non-crystalline ionic precursors, resulting in distinct compositions of the deposited mineral phase. STATEMENT OF SIGNIFICANCE: In growing children new bone is formed either due to apposition of bone tissue e.g. at the outer ridge of long bones to allow growth in thickness (bone modeling), or in cavities inside the mineralized matrix when replacing tissue (bone remodeling). We demonstrate that mineral crystal shape and composition are not the same between these two sites, which is indicative of differences in mineralization precursors. We suggest that this may be due to a longer mineral transport distance to sites of new bone formation as compared to remodeling where mineral can be locally recycled.

Synergistic effects of VE-TPGS and riboflavin in crosslinking of dentine

OBJECTIVE

Effect of d-alpha-tocopheryl poly(ethyleneglycol)-1000-succinate (VE-TPGS) with riboflavin-5'-phosphate solution on crosslinking of dentine collagen was investigated to analyze collagen's structural integrity.

METHODS

VE-TPGS was added to RF-solution, at RF/VE-TPGS (w/w) ratios of 0.125/0.250 and 0.125/0.500. Demineralized dentine beams were used (10wt.% phosphoric acid), rinsed using deionized-water and analysed using ELISA (Human MMP2 ELISA; Human CTSK/Cathepsin-K for MMP2 and Cathepsin K analysis). AFM of dentine collagen-fibrils structure was done before and after dentine specimens' placement in mineralization solution and tested after 14days in artificial saliva/collagenase (AS/Co) solution. The specimens were tested after 24h in mineralization solution for surface/bulk elastic modulus. Nano-indentation was carried out for each specimen on intertubular-dentine with lateral spacing of 400nm. Reduced elastic-modulus and nano-hardness were calculated and collagen content was determined using hydroxyproline-assay. Micro-Raman were performed. TEM was carried out to study structural variations of dentine-collagen in artificial-saliva (collagenase). Data were presented as mean±standard deviation and analyzed by SPSS v.15, by analysis of variance.

RESULTS

Synergetic effect of VE-TPGS was observed with RF through higher structural integrity of dentine collagen-fibrils shown by TEM/AFM. Superior surface/bulk mechanical stability was shown by nano-indentation/mechanical testing. Improvement in collagenase degradation resistance for hydroxyproline release was observed and lower endogenous-protease release of MMP-2/Cathepsin-K. Raman-analysis analysed chemical interactions between RF and collagen confirming structural-integrity of collagen fibrils after crosslinking. After 24h mineralization, AFM showed mineral depositions in close association with dentine-collagen fibrils with RF/VE-TPGS formulations.

SIGNIFICANCE

Potential synergetic effect of RF/VE-TPGS was observed by reflection of higher structural integrity and conformational-stability of dentine-collagen fibrils.

Deproteinization of Cortical Bone: Effects of Different Treatments

Bone is a biological composite material having collagen and mineral as its main constituents. In order to better understand the arrangement of the mineral phase in bone, porcine cortical bone was deproteinized using different chemical treatments. This study aims to determine the best method to remove the protein constituent while preserving the mineral component. Chemicals used were H₂O₂, NaOCl, NaOH, and KOH, and the efficacy of deproteinization treatments was determined by thermogravimetric analysis and Raman spectroscopy. The structure of the residual mineral parts was examined using scanning electron microscopy. X-ray diffraction was used to confirm that the mineral component was not altered by the chemical treatments. NaOCl was found to be the most effective method for deproteinization and the mineral phase was self-standing, supporting the hypothesis that bone is an interpenetrating composite. Thermogravimetric analyses and Raman spectroscopy results showed the preservation of mineral crystallinity and presence of residual organic material after all chemical treatments. A defatting step, which has not previously been used in conjunction with deproteinization to isolate the mineral phase, was also used. Finally, Raman spectroscopy demonstrated that the inclusion of a defatting procedure resulted in the removal of some but not all residual protein in the bone.

Graft-specific immune tolerance is determined by residual antigenicity of xenogeneic extracellular matrix scaffolds

Antigenicity remains the primary barrier towards expanding the use of unfixed xenogeneic biomaterials in clinical applications. An unfixed xenogeneic biomaterial devoid of antigenicity, with maintained structural and mechanical integrity, has potential to overcome the limitations of current clinically utilized glutaraldehyde-fixed xenogeneic biomaterials, such as heart valve bioprostheses. Unfortunately, the threshold level of residual antigenicity necessary to overcome graft-specific immune responses in unfixed xenogeneic tissue has yet to be determined. Furthermore, little information is known regarding the extent to which in vitro disruption of native ECM properties, resulting from decellularization or antigen removal procedures, are tolerated following in vivo implantation. This manuscript demonstrates that humoral adaptive immune responses are more sensitive to residual xenogeneic biomaterial antigen content than are cell-mediated adaptive responses. Critically, the threshold for tolerable residual antigenicity is identified, with removal of ≥92% of lipophilic antigens required to reduce adaptive immune responses to levels equivalent to glutaraldehyde fixed tissue. Finally, the results demonstrated that the innate immune system tolerates minor changes in protein organization provided that molecular structure is maintained. Antigen removed xenogeneic biomaterials achieving these in vitro success criteria induce in vivo adaptive and innate tolerance, while modulating pro-regenerative constructive remodeling.

STATEMENT OF SIGNIFICANCE

Removal of antigenic components from candidate xenogeneic biomaterials is the primary success criteria for development of extracellular matrix (ECM) scaffolds in tissue engineering applications. Currently, the threshold level of residual biomaterial antigenicity required to overcome recipient graft-specific adaptive immune responses is unknown. Additionally, the extent to which the innate immune response tolerates changes to the native ECM, resulting from the ECM scaffold production process, has yet to be determined. This manuscript not only establishes the threshold for tolerable residual antigenicity, but also demonstrates that deviations in protein organization are tolerated by the innate immune system, provided macromolecular structure remains intact. In doing so, we provide the foundation of an immunologically-acceptable unfixed xenogeneic biomaterial for use in clinical applications.

Multiscale design and synthesis of biomimetic gradient protein/biosilica composites for interfacial tissue engineering

Continuous gradients present at tissue interfaces such as osteochondral systems, reflect complex tissue functions and involve changes in extracellular matrix compositions, cell types and mechanical properties. New and versatile biomaterial strategies are needed to create suitable biomimetic engineered grafts for interfacial tissue engineering. Silk protein-based composites, coupled with selective peptides with mineralization domains, were utilized to mimic the soft-to-hard transition in osteochondral interfaces. The gradient composites supported tunable mineralization and mechanical properties corresponding to the spatial concentration gradient of the mineralization domains (R5 peptide). The composite system exhibited continuous transitions in terms of composition, structure and mechanical properties, as well as cytocompatibility and biodegradability. The gradient silicified silk/R5 composites promoted and regulated osteogenic differentiation of human mesenchymal stem cells in an osteoinductive environment in vitro. The cells differentiated along the composites in a manner consistent with the R5-gradient profile. This novel biomimetic gradient biomaterial design offers a useful approach to meet a broad range of needs in regenerative medicine.

A poly(2-hydroxyethyl methacrylate)-based resin improves the dentin remineralizing ability of calcium silicates

Bioactive polymeric composites have received great attention for their capability to remineralize the dentin tissue. This study was aimed at evaluating if a poly(HEMA-co-TEGDMA) resin (HEMA: 2-hydroxyethyl methacrylate; TEGDMA: triethyleneglycol dimethacrylate) may increase the in vitro apatite forming ability of a calcium silicate cement (CaSi), in view of developing a hydrophilic light-curable composite bio-remineralizing restorative material (R-CaSi). To this purpose, the following experiments were carried out: (1) In vitro apatite forming ability of R-CaSi and CaSi was comparatively assessed by micro-Raman spectroscopy after immersion of the cement disks in Dulbecco's Phosphate Buffered Saline (DPBS) at 37°C for 1-28days; (2) Previously demineralized human dentin slices were soaked for 7days in close contact with the CaSi and R-CaSi cements as well as poly(HEMA), poly(TEGDMA) and poly(HEMA-co-TEGDMA), and then were comparatively analyzed by IR spectroscopy. Micro-Raman spectroscopy showed that in calcium phosphate nucleation tests, the B-type carbonated apatite deposit formed on R-CaSi was thicker than that on CaSi; therefore, the poly(HEMA-co-TEGDMA) resin proved able to increase the in vitro apatite forming ability of the calcium silicate-based cement. Both cements were found to induce dentin remineralization, R-CaSi to a higher extent, in agreement with the calcium phosphate nucleation tests. This result may be ascribed to the positive role played by the polymeric component, which was found to interact with collagen and to chelate calcium ions. Upon remineralization, collagen underwent conformational rearrangements and the formed apatite phase, rather than a simple deposit, was intimately bound to the collagen matrix, thanks to the calcium ions chelated by it.

Effects of bleaching on osteoclast activity and their modulation by osteostatin and fibroblast growth factor 2

HYPOTHESIS

Dental bleaching with H2O2 is a common daily practice in dentistry to correct discoloration of anterior teeth. The aim of this study has been to determine whether this treatment of human teeth affects growth, differentiation and activity of osteoclast-like cells, as well as the putative modulatory action of osteostatin and fibroblast growth factor 2 (FGF-2).

EXPERIMENTS

Previously to the in vitro assays, structural, physical-chemical and morphological features of teeth after bleaching were studied. Osteoclast-like cells were cultured on human dentin disks, pre-treated or not with 38% H2O2 bleaching gel, in the presence or absence of osteostatin (100 nM) or FGF-2 (1 ng/ml). Cell proliferation and viability, intracellular content of reactive oxygen species (ROS), pro-inflammatory cytokine (IL-6 and TNFα) secretion and resorption activity were evaluated.

FINDINGS

Bleaching treatment failed to affect either the structural or the chemical features of both enamel and dentin, except for slight morphological changes, increased porosity in the most superficial parts (enamel), and a moderate increase in the wettability degree. In this scenario, bleaching produced an increased osteoclast-like cell proliferation but decreased cell viability and cytokine secretion, while it augmented resorption activity on dentin. The presence of either osteostatin or FGF-2 reduced the osteoclast-like cell proliferation induced by bleaching. FGF-2 enhanced ROS content, whereas osteostatin decreased ROS but increased TNFα secretion. The bleaching effect on resorption activity was increased by osteostatin, but this effect was less evident with FGF-2.

CONCLUSIONS

These findings further confirm the deleterious effects of tooth bleaching by affecting osteoclast growth and function as well as different modulatory actions of osteostatin and FGF-2.

Induction and quantification of collagen fiber alignment in a three-dimensional hydroxyapatite-collagen composite scaffold

Hydroxyapatite-collagen composite scaffolds are designed to serve as a regenerative load bearing replacement that mimics bone. However, the material properties of these scaffolds are at least an order of magnitude less than that of bone and subject to fail under physiological loading conditions. These scaffolds compositionally resemble bone but they do not possess important structural attributes such as an ordered arrangement of collagen fibers, which is a correlate to the mechanical properties in bone. Furthermore, it is unclear how much ordering of structure is satisfactory to mimic bone. Therefore, quantitative methods are needed to characterize collagen fiber alignment in these scaffolds for better correlation between the scaffold structure and the mechanical properties. A combination of extrusion and compaction was used to induce collagen fiber alignment in composite scaffolds. Collagen fiber alignment, due to extrusion and compaction, was quantified from polarized light microscopy images with a Fourier transform image processing algorithm. The Fourier transform method was capable of resolving the degree of collagen alignment from polarized light images. Anisotropy indices of the image planes ranged from 0.08 to 0.45. Increases in the degree of fiber alignment induced solely by extrusion (0.08-0.25) or compaction (0.25-0.44) were not as great as those by the combination of extrusion and compaction (0.35-0.45). Additional measures of randomness and fiber direction corroborate these anisotropy findings. This increased degree of collagen fiber alignment was induced in a preferred direction that is consistent with the extrusion direction and parallel with the compacted plane.

On the Collagen Mineralization. A Review

Collagen mineralization (CM) is a challenging process that has received a lot of attention in the past years. Among the reasons for this interest, the key role is the importance of collagen and hydroxyapatite in natural bone, as major constituents. Different protocols of mineralization have been developed, specially using simulated body fluid (SBF) and many methods have been used to characterize the systems obtained, starting with methods of determining the mineral content (XRD, FTIR, Raman, High-Resolution Spectral Ultrasound Imaging), continuing with imaging methods (AFM, TEM, SEM, Fluorescence Microscopy), thermal analysis (DSC and TGA), evaluation of the mechanical and biological properties, including statistical methods and molecular modeling. In spite of the great number of studies regarding collagen mineralization, its mechanism, both in vivo and in vitro, is not completely understood. Some of the methods used in vitro and investigation methods are reviewed here.

NMR spectroscopy of native and in vitro tissues implicates polyADP ribose in biomineralization

Nuclear magnetic resonance (NMR) spectroscopy is useful to determine molecular structure in tissues grown in vitro only if their fidelity, relative to native tissue, can be established. Here, we use multidimensional NMR spectra of animal and in vitro model tissues as fingerprints of their respective molecular structures, allowing us to compare the intact tissues at atomic length scales. To obtain spectra from animal tissues, we developed a heavy mouse enriched by about 20% in the NMR-active isotopes carbon-13 and nitrogen-15. The resulting spectra allowed us to refine an in vitro model of developing bone and to probe its detailed structure. The identification of an unexpected molecule, poly(adenosine diphosphate ribose), that may be implicated in calcification of the bone matrix, illustrates the analytical power of this approach.

Association of calcium and phosphate ions with collagen in the mineralization of vertebrate tissues

Among the vertebrate species, collagen is the most abundant protein and is associated with mineralization of their skeleton and dentition in all tissues except enamel. In such tissues, bones, calcifying tendon, dentin, and cementum are comprised principally of type I collagen, which has been proposed as a template for apatite mineral formation. Recent considerations of the interaction between type I collagen and calcium and phosphate ions as the major constituents of apatite have suggested that collagen polypeptide stereochemistry underlies binding of these ions at sites within collagen hole and overlap regions and leads to nucleation of crystals. The concept is fundamental to understanding both normal and abnormal mineralization, and it is reviewed in this article. Given this background, avenues for additional research studies in vertebrate mineralization will also be described. The latter include, for instance, how mineralization events subsequent to nucleation, that is, crystal growth and development, occur and whether they, too, are directed by collagen stereochemical parameters; whether mineralization can be expected in all spaces between collagen molecules; whether the side chains of charged amino acid residues actually point toward and into the hole and overlap collagen spaces to provide putative binding sites for calcium and phosphate ions; and what phenomena may be responsible for mineralization beyond hole and overlap zones and into extracellular tissue regions between collagen structural units. These questions will be discussed to provide a broader understanding of collagen contributions to potential mechanisms of vertebrate mineralization.

Interactions between inorganic and organic phases in bone tissue as a source of inspiration for design of novel nanocomposites

Mimicking the nanostructure of bone and understanding the interactions between the nanoscale inorganic and organic components of the extracellular bone matrix are crucial for the design of biomaterials with structural properties and a functionality similar to the natural bone tissue. Generally, these interactions involve anionic and/or cationic functional groups as present in the organic matrix, which exhibit a strong affinity for either calcium or phosphate ions from the mineral phase of bone. This study reviews the interactions between the mineral and organic extracellular matrix components in bone tissue as a source of inspiration for the design of novel nanocomposites. After providing a brief description of the various structural levels of bone and its main constituents, a concise overview is presented on the process of bone mineralization as well as the interactions between calcium phosphate (CaP) nanocrystals and the organic matrix of bone tissue. Bioinspired synthetic approaches for obtaining nanocomposites are subsequently addressed, with specific focus on chemical groups that have affinity for CaPs or are involved in stimulating and controlling mineral formation, that is, anionic functional groups, including carboxyl, phosphate, sulfate, hydroxyl, and catechol groups.

Biomimetic remineralization of dentin

OBJECTIVES

Remineralization of demineralized dentin is important for improving dentin bonding stability and controlling primary and secondary caries. Nevertheless, conventional dentin remineralization strategy is not suitable for remineralizing completely demineralized dentin within hybrid layers created by etch-and-rinse and moderately aggressive self-etch adhesive systems, or the superficial part of a caries-affected dentin lesion left behind after minimally invasive caries removal. Biomimetic remineralization represents a different approach to this problem by attempting to backfill the demineralized dentin collagen with liquid-like amorphous calcium phosphate nanoprecursor particles that are stabilized by biomimetic analogs of noncollagenous proteins.

METHODS

This paper reviewed the changing concepts in calcium phosphate mineralization of fibrillar collagen, including the recently discovered, non-classical particle-based crystallization concept, formation of polymer-induced liquid-precursors (PILP), experimental collagen models for mineralization, and the need for using phosphate-containing biomimetic analogs for biomimetic mineralization of collagen. Published work on the remineralization of resin-dentin bonds and artificial caries-like lesions by various research groups was then reviewed. Finally, the problems and progress associated with the translation of a scientifically sound concept into a clinically applicable approach are discussed.

RESULTS AND SIGNIFICANCE

The particle-based biomimetic remineralization strategy based on the PILP process demonstrates great potential in remineralizing faulty hybrid layers or caries-like dentin. Based on this concept, research in the development of more clinically feasible dentin remineralization strategy, such as incorporating poly(anionic) acid-stabilized amorphous calcium phosphate nanoprecursor-containing mesoporous silica nanofillers in dentin adhesives, may provide a promising strategy for increasing of the durability of resin-dentin bonding and remineralizing caries-affected dentin.

Novel bioactivity of phosvitin in connective tissue and bone organogenesis revealed by live calvarial bone organ culture models

Egg yolk phosvitin is one of the most highly phosphorylated extracellular matrix proteins known in nature with unique physico-chemical properties deemed to be critical during ex-vivo egg embryo development. We have utilized our unique live mouse calvarial bone organ culture models under conditions which dissociates the two bone remodeling stages, viz., resorption by osteoclasts and formation by osteoblasts, to highlight important and to date unknown critical biological functions of egg phosvitin. In our resorption model live bone cultures were grown in the absence of ascorbate and were stimulated by parathyroid hormone (PTH) to undergo rapid osteoclast formation/differentiation with bone resorption. In this resorption model native phosvitin potently inhibited PTH-induced osteoclastic bone resorption with simultaneous new osteoid/bone formation in the absence of ascorbate (vitamin C). These surprising and critical observations were extended using the bone formation model in the absence of ascorbate and in the presence of phosvitin which supported the above results. The results were corroborated by analyses for calcium release or uptake, tartrate-resistant acid phosphatase activity (marker for osteoclasts), alkaline phosphatase activity (marker for osteoblasts), collagen and hydroxyproline composition, and histological and quantitative histomorphometric evaluations. The data revealed that the discovered bioactivity of phosvitin mirrors that of ascorbate during collagen synthesis and the formation of new osteoid/bone. Complementing those studies use of the synthetic collagen peptide analog and cultured calvarial osteoblasts in conjunction with mass spectrometric analysis provided results that augmented the bone organ culture work and confirmed the capacity of phosvitin to stimulate differentiation of osteoblasts, collagen synthesis, hydroxyproline formation, and biomineralization. There are striking implications and interrelationships of this affect that relates to the evolutionary inactivation of the gene of an enzyme L-gulono-γ-lactone oxidase, which is involved in the final step of ascorbate biosynthesis, in many vertebrate species including passeriform birds, reptiles and teleost fish whose egg yolk contain phosvitin. These represent examples of how developing ex-vivo embryos of such species can achieve connective tissue and skeletal system formation in the absence of ascorbate.

Peptide-mediated intracellular delivery of miRNA-29b for osteogenic stem cell differentiation

Stem cell differentiation is modulated by several key molecules, including cytokines, hormones, and engineered peptides. Emerging evidence suggests that microRNA has potential applications in stem cell engineering, such as in osteoblastic differentiation. MicroRNAs (miRNAs) bind to the 3'-untranslated region (UTR) sequence of target mRNA, thereby attenuating protein synthesis. Our goal was to evaluate the delivery of miRNA, i.e., miRNA-29b, to stem cells to promote osteoblastic differentiation because this miRNA is known to target anti-osteogenic factors gene expression. Despite the important role of miRNAs, their application has been limited due to poor cell/tissue penetration. The authors attempted to overcome this limitation by using a cell-penetrating peptide (CPP) carrier. Herein, the arginine-rich CPP, called the lowmolecular weight protamine (LMWP), is the sequence from natural protamine. We worked out the difficult problem to transfect into hMSCs by the complex with LMWP, and then we investigated synthetic double-stranded miR-29b could be induced osteoblast differentiation.

Topographical distribution of phosphorylation sites of phosvitins by mass spectrometry

Phosvitin, derived from the vitellogenin II gene protein, is a highly phosphorylated protein found in egg yolk. A second hypothetical protein has been predicted based on the vitellogenin I gene, but has not been defined at the protein level. Mass spectrometric analysis was used to identify the phosphopeptide sequences and the precise sites of phosphorylation of two phosvitins, phosvitin 1 and phosvitin 2 derived from vitellogenins I and II, respectively. Samples of native phosvitin were subjected to tryptic digestion followed by mass spectrometric analysis: (i) native phosvitin peptides, (ii) after treatment with NaOH, and (iii) after chemical derivatization of P-Ser/P-Thr residues by dithiothreitol under base-catalyzed conditions. A combination of these approaches led to the identification of 68 and 35 phosphopeptides with 89 (81 P-Ser and 8 P-Thr residues) and 62 (57 P-Ser and 5 P-Thr residues) phosphorylation sites of phosvitin 1 and phosvitin 2, respectively. These data for the first time documented on a large scale the major states and sites of phosphorylation of phosvitins with a total of 151 phosphorylation sites. Importantly, the present work also provided the first direct de novo protein amino-acid sequence data for phosvitin 1 protein and evidence for the full expression of vitellogenin I gene.

BIOLOGICAL SIGNIFICANCE

We have for the first time generated a large number of phosphopeptides (~100) and identified 151 phosphorylation sites of phosvitin 1 and phosvitin 2, respectively. Importantly, this study also led to the discovery of a novel phosvitin 1 and provided the first direct de novo protein amino-acid sequence data for the full expression of vitellogenin I gene. There is considerable interest in naturally occurring phosphopeptides/phosphoproteins and their application in biomedical fields and in the food industry because of their molecular characteristics and non-toxic nature, hence, our work opens new avenues to pursue such endeavors. In addition, the results provide important fundamental biologic information relevant to evolutionary developments of vertebrate animals beginning with the earliest fish, reptiles, birds and more contemporary mammals. For instance, the abundance of phosvitins with a unique degree of phosphorylation in the egg yolk of fish, reptiles, and birds suggests potential biological functions of phosvitins which are critical to the development of embryos of these distant vertebrates.

NELL-1 increases pre-osteoblast mineralization using both phosphate transporter Pit1 and Pit2

NELL-1 is a potent osteoinductive molecule that enhances bone formation in multiple animal models through currently unidentified pathways. In the present manuscript, we hypothesized that NELL-1 may regulate osteogenic differentiation accompanied by alteration of inorganic phosphate (Pi) entry into the osteoblast via sodium dependent phosphate (NaPi) transporters. To determine this, MC3T3-E1 pre-osteoblasts were cultured in the presence of recombinant human (rh)NELL-1 or rhBMP-2. Analysis was performed for intracellular Pi levels through malachite green staining, Pit-1 and Pit-2 expression, and forced upregulation of Pit-1 and Pit-2. Results showed rhNELL-1 to increase MC3T3-E1 matrix mineralization and Pi influx associated with activation of both Pit-1 and Pit-2 channels, with significantly increased Pit-2 production. In contrast, Pi transport elicited by rhBMP-2 showed to be associated with increased Pit-1 production only. Next, neutralizing antibodies against Pit-1 and Pit-2 completely abrogated the Pi influx effect of rhNELL-1, suggesting rhNELL-1 is dependent on both transporters. These results identify one potential mechanism of action for rhNELL-1 induced osteogenesis and highlight a fundamental difference between NELL-1 and BMP-2 signaling.

Connective tissue mineralization in Abcc6-/- mice, a model for pseudoxanthoma elasticum

Pseudoxanthoma elasticum (PXE) is a heritable multisystem disorder characterized by ectopic mineralization. However, the structure of the mineral deposits, their interactions with the connective tissue matrix, and the details of the progressive maturation of the mineral crystals are currently unknown. In this study, we examined the mineralization processes in Abcc6(-/-) mice, a model system for PXE, by energy dispersive X-ray and Fourier transform infrared imaging spectroscopy (FT-IRIS). The results indicated that the principal components of the mineral deposits were calcium and phosphate which co-localized within the histologically demonstrable lesions determined by topographic mapping. The Ca/P ratio increased in samples with progressive mineralization reaching the value comparable to that in endochondral bone. A progressive increase in mineralization was also reflected by increased mineral-to-matrix ratio determined by FT-IRIS. Determination of the mineral phases by FT-IRIS suggested progressive maturation of the mineral deposits from amorphous calcium phosphate to hydroxyapatite. These results provide critical information of the mechanisms of mineralization in PXE, with potential pharmacologic implications.