Postnatal Mandibular Cheek Tooth Development in the Miniature Pig Based on Two-Dimensional and Three-Dimensional X-Ray Analyses

Treatment of Oral Disease in Eight Pet Pot-Bellied Pigs (Sus scrofa domesticus): A Case Series

Evidence of porcine oral pathology in client-owned domestic pigs has been reported in recent literature. The most common abnormalities are missing teeth and periodontal disease. This case series reviews the diagnosis and treatment of dental disease in 8 pet Vietnamese Pot-Bellied Pigs (Sus scrofa domesticus) over a 6-year period (2015-2021). Inclusion criteria included pigs over 1 year of age that had at least 2 sequential visits involving photographs, full-mouth intraoral radiographs, and dental charting. Eight pigs were identified for study inclusion. The study population included 4 castrated males, 3 spayed females, and 1 intact female. The 8 subjects had a total of 28 visits. Fifty-five intraoral dental extractions were performed and complete healing of 44 extraction sites was observed (11 sites were lost to follow up). Canine tooth reduction was performed on 52 tusks in 7 pigs with exposure of 1 pulp that was treated by partial pulpectomy and direct pulp capping. Restoration of carious lesions was performed on 4 teeth. The most commonly extracted teeth were the right and left maxillary first molars (10 of 47 teeth). Reasons for tooth extraction included: periodontal disease, complicated crown fracture, nonvital +/- periapical pathology, and persistent deciduous teeth. Additional treatments ranged from type 1 crown lengthening with restoration of carious lesions, tusk trimming, closed and open root planing, dental extractions, ultrasonic scaling, and polishing. This article stresses the importance of routine dental healthcare and early intervention for periodontal disease in pigs.

Anatomical study of the zygomaticofacial foramen and zygomatic canals communicating with the zygomaticofacial foramen for zygomatic implant treatment: a cadaver study with micro-computed tomography analysis

In the present study, anatomical assessment of zygomaticofacial foramina (ZFFs) and zygomatic canals communicating with ZFFs were performed using cadaver micro-computed tomography images. It was suggested that all ZFFs were located above the jugale (Ju)-zygomaxillare (Zm) line, which is the reference line connecting the Ju and Zm, and most were located in the zygomatic body area (ZBA). The anteroposterior position of the ZFF in the ZBA was within a middle to posterior region and was most often located slightly posteriorly in males and closer to the middle of the region in females. The mean distance from the Ju-Zm line to the ZFF in the ZBA was 12.36 mm (standard deviation [SD] 1.52 mm) in males and 11.48 mm (SD 1.61 mm) in females. In zygomatic canals communicating with ZFFs, most zygomatic canals were type I canals, communicating from the zygomaticoorbital foramen and harboring the zygomaticofacial nerve, and the others were type II canals, communicating from the zygomaticotemporal foramen and located near the posterior margin of the frontal process. These results provide useful anatomical information for preventing nerve injury during surgical procedures for zygomatic implant treatment.

A labeling study of dentin formation rates during crown and root growth of porcine mandibular first molars

We used fluorochrome labeling to study spatiotemporal variation of dentin apposition (DAR) and extension (DER) rates during crown and root formation of mandibular first molars from wild boar and domestic pigs. DAR was reconstructed along the course of dentinal tubules in four zones of the crown and in the upper root area. In all five zones, mean DAR increased during the first 30% to 40% of apposition, reaching highest values (22-23 μm/day) in the upper-lateral crown zone. Lowest values were recorded near the dentin-pulp interface (DPI). Typically, DARs in contemporaneously formed dentin areas were higher in more cuspally compared to more cervically/apically located zones. DER was high (>200 μm/day) in early postnatal crown dentin and then decreased markedly in cervical direction, with lowest values in the cervical crown zone. After this nadir, DER sharply increased in the upper 30% to 40% of the root extension, reaching values equaling (wild boar) or even surpassing (domestic pigs) those recorded in the upper lateral crown. After this peak, DER again decreased. While DAR did not differ markedly between wild boar and domestic pigs, the DER showed marked differences, both regarding maximum values (208.1 μm/day in wild boar, 272.2 μm/day in domestic pigs) and the timing of the root growth spurt, which occurred earlier in the domestic pigs. We consider the more rapid recruitment of secretory odontoblasts in domestic pigs (reflected by higher DER) a side effect of selection for rapid body growth during pig domestication.

A Computed Tomographic Study of the Molar Teeth of Babyrousa spp

A photographic and computed tomography (CT) scanning study was carried out on 295 molar teeth of 18 adult male Babyrousa babyrussa skulls and 8 skulls of Babyrousa celebensis including seven adult males and one adult female. The occlusal morphology of the permanent maxillary and mandibular molar teeth of B. babyrussa was very similar to that of B. celebensis. Most B. babyrussa maxillary molar teeth had six roots, with small numbers of teeth having four, five or seven roots. A similar pattern was suggested in B. celebensis. Mandibular molar teeth had between four and eight roots. Tooth roots of maxillary and mandibular first and second molar teeth were largely tapering, rod-like structures. The roots of the right and left maxillary third molar teeth had a more complex arrangement; some were inserted almost vertically into the maxilla; others were orientated in a more distal direction. The mesial and distal roots were splayed in appearance. The right and left mandibular third molar tooth roots retained elements of the open 'C' shape and were generally orientated distally. The pulp chambers were arched to fit under the main cusps in all molar teeth. Pulp canals were variable in number.

Regeneration of alveolar bone defects in the experimental pig model: A systematic review and meta-analysis

OBJECTIVE

Pigs are emerging as a preferred experimental in vivo model for bone regeneration. The study objective was to answer the focused PEO question: in the pig model (P), what is the capacity of experimental alveolar bone defects (E) for spontaneous regeneration in terms of new bone formation (O)?

METHODS

Following PRISMA guidelines, electronic databases were searched for studies reporting experimental bone defects or extraction socket healing in the maxillae or mandibles of pigs. The main inclusion criteria were the presence of a control group of untreated defects/sockets and the assessment of regeneration via 3D tomography [radiographic defect fill (RDF)] or 2D histomorphometry [new bone formation (NBF)]. Random effects meta-analyses were performed for the outcomes RDF and NBF.

RESULTS

Overall, 45 studies were included reporting on alveolar bone defects or extraction sockets, most frequently in the mandibles of minipigs. Based on morphology, defects were broadly classified as 'box-defects' (BD) or 'cylinder-defects' (CD) with a wide range of healing times (10 days to 52 weeks). Meta-analyses revealed pooled estimates (with 95% confidence intervals) of 50% RDF (36.87%-63.15%) and 43.74% NBF (30.47%-57%) in BD, and 44% RDF (16.48%-71.61%) and 39.67% NBF (31.53%-47.81%) in CD, which were similar to estimates of socket-healing [48.74% RDF (40.35%-57.13%) and 38.73% NBF (28.57%-48.89%)]. Heterogeneity in the meta-analysis was high (I2 > 90%).

CONCLUSION

A substantial body of literature revealed a high capacity for spontaneous regeneration in experimental alveolar bone defects of (mini)pigs, which should be considered in future studies of bone regeneration in this animal model.

Animal Models for Investigating Osseointegration: An Overview of Implant Research over the Last Three Decades

Dental implants and bone augmentation are among dentistry's most prevalent surgical treatments; hence, many dental implant surfaces and bone grafts have been researched to improve bone response. Such new materials were radiologically, histologically, and histomorphometrically evaluated on animals before being used on humans. As a result, several studies used animals to evaluate novel implant technologies, biocompatibility, surgical techniques, and osseointegration strategies, as preclinical research on animal models is essential to evaluate bioactive principles (on cells, compounds, and implants) that can act through multiple mechanisms and to predict animal behavior, which is difficult to predict from in vitro studies alone. In this study, we critically reviewed all research on different animal models investigating the osseointegration degree of new implant surfaces, reporting different species used in the osseointegration research over the last 30 years. Moreover, this is the first study to summarize reviews on the main animal models used in the translational research of osseointegration, including the advantages and limitations of each model and determining the ideal location for investigating osseointegration in small and large animal models. Overall, each model has advantages and disadvantages; hence, animal selection should be based on the cost of acquisition, animal care, acceptability to society, availability, tolerance to captivity, and housing convenience. Among small animal models, rabbits are an ideal model for biological observations around implants, and it is worth noting that osseointegration was discovered in the rabbit model and successfully applied to humans.

In Vivo Prediction of Breast Muscle Weight in Broiler Chickens Using X-ray Images Based on Deep Learning and Machine Learning

Accurately estimating the breast muscle weight of broilers is important for poultry production. However, existing related methods are plagued by cumbersome processes and limited automation. To address these issues, this study proposed an efficient method for predicting the breast muscle weight of broilers. First, because existing deep learning models struggle to strike a balance between accuracy and memory consumption, this study designed a multistage attention enhancement fusion segmentation network (MAEFNet) to automatically acquire pectoral muscle mask images from X-ray images. MAEFNet employs the pruned MobileNetV3 as the encoder to efficiently capture features and adopts a novel decoder to enhance and fuse the effective features at various stages. Next, the selected shape features were automatically extracted from the mask images. Finally, these features, including live weight, were input to the SVR (Support Vector Regression) model to predict breast muscle weight. MAEFNet achieved the highest intersection over union (96.35%) with the lowest parameter count (1.51 M) compared to the other segmentation models. The SVR model performed best (R2 = 0.8810) compared to the other prediction models in the five-fold cross-validation. The research findings can be applied to broiler production and breeding, reducing measurement costs, and enhancing breeding efficiency.

A Computed Tomographic Study of the Premolar Teeth of Babyrousa spp

A photographic and computed tomography (CT) scanning study was carried out on the premolar teeth of 18 adult male Babyrousa babyrussa skulls, 10 skulls of Babyrousa celebensis, including 6 adult males, 1 adult female, 1 subadult male, 1 subadult female, and 1 juvenile male. The occlusal morphology of the permanent maxillary premolar teeth of B. babyrussa was very similar to that of B. celebensis. Almost all the maxillary third premolar teeth (107/207) had 2 roots, whereas maxillary fourth premolar teeth (108/208) had 3 or 4 roots. All of the mesial tooth roots of 107/207 and 108/208 were tapering rod-like structures; each contained a single pulp canal. Almost all distal roots of 107/207 were "C" shaped and contained 2 pulp canals. The 108/208 palatal roots were "C" shaped and contained 2 pulp canals. The mesial and distal roots of the mandibular third premolar teeth (307/407) teeth were uniformly rod-like, as were the mesial roots of the mandibular fourth premolar teeth (308/408) teeth. The distal roots of the 308/408 teeth were "C" shaped. All B. babyrussa 307/407 teeth have a single pulp canal located in each of the mesial and distal roots. The 308/408 mesial tooth root contained 1 pulp canal. In all but 3 of the 36 distal 308/408 roots of B. babyrussa teeth and in 7 of the 14 distal roots of B. celebensis teeth there was a single pulp canal; in the other 7 teeth there were 2 pulp canals. Each of the 3 medial roots contained 1 pulp canal.

Accurate gingival segmentation from 3D images with artificial intelligence: an animal pilot study

BACKGROUND

Gingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and time-consuming procedure. This study aims to evaluate the feasibility and accuracy of an alternatively novel, non-invasive technology based on the precise 3-dimension (3D) soft tissue reconstruction from intraoral scanning and cone beam computed tomography (CBCT) to predict the gingival biotype.

METHODS

As a proof-of-concept, Yorkshire pig mandibles were scanned, and the CBCT data were fed into a deep-learning model to reconstruct the teeth and surrounding bone structure in 3D. By overlaying the CBCT scan with the intraoral scans, an accurate superposition was created and used for virtual measurements of the soft tissue thickness. Meanwhile, gingival thicknesses were also measured by a periodontal probe and digital caliper on the buccal and lingual sides at 3 mm apical to the gingival margin of the posterior teeth and compared with the virtual assessment at the same location. The data obtained from virtual and clinical measurements were compared by Wilcoxon matched-pairs signed-rank analysis, while their correlation was determined by Pearson's r value. The Mann-Whitney U test was used for intergroup comparisons of the amount of difference.

RESULTS

Among 108 investigated locations, the clinical and virtual measurements are strongly positively correlated (r = 0.9656, P < 0.0001), and only clinically insignificant differences (0.066 ± 0.223 mm) were observed between the two assessments. There is no difference in the agreement between the virtual and clinical measurements on sexually matured samples (0.087 ± 0.240 mm) and pre-pubertal samples (0.033 ± 0.195 mm). Noticeably, there is a greater agreement between the virtual and clinical measurements at the buccal sites (0.019 ± 0.233 mm) than at the lingual sites (0.116 ± 0.215 mm).

CONCLUSION

In summary, the artificial intelligence-based virtual measurement proposed in this work provides an innovative technique potentially for accurately measuring soft tissue thickness using clinical routine 3D imaging systems, which will aid clinicians in generating a more comprehensive diagnosis with less invasive procedures and, in turn, optimize the treatment plans with more predictable outcomes.

Wild boar versus domestic pig-Deciphering of crown growth in porcine second molars

Based on the previously established periodicity of enamel growth marks, we reconstructed crown growth parameters of mandibular second molars from two wild boar and two domestic pigs of the Linderöd breed. Body weight gain and progression of dental development were markedly faster in the domestic pigs than the wild boar. While the final crown dimensions of the M₂ did not differ between domestic pigs and wild boar, mean crown formation time (CFT) of this tooth was considerably shorter in the domestic pigs (162 days) than in the wild boar (205 days). The difference in CFT was mainly attributable to a higher enamel extension rate (EER) in the domestic pig. Generally, EER was highest in the cuspalmost deciles of the length of the enamel-dentine-junction and markedly dropped in cervical direction, with lowest values occurring in the cervicalmost decile. In consequence, the cuspal half of the M₂ crown was formed about three times faster than the cervical half. In contrast to the EER, no marked difference in daily enamel secretion rate (DSR) was recorded between domestic pigs and wild boar. The duration of enamel matrix apposition as well as linear enamel thickness in corresponding crown portions was only slightly lower in the domestic pigs than the wild boar. Thus, the earlier completion of M₂ crown growth in the domestic pig was mainly achieved by a higher EER and not by an increased DSR. The more rapid recruitment of secretory ameloblasts in the course of molar crown formation of domestic pigs compared to wild boar is considered a side-effect of the selection for rapid body growth during pig domestication.

A Non-Linear Osteometric Modeling Method for Three-Dimensional Mandibular Morphological Changes During Growth: One-Year Monitoring of Miniature Pigs Using Cone-Beam Computed Tomography

Knowledge of mandibular growth and development is essential for diagnosis of malformation and early interception. A previous method of quantifying mandibular growth using the distances between selected anatomical landmarks over the growth period does not provide a complete, quantitative description of the continuous growth patterns. The current study aimed to bridge the gap by measuring the 3D continuous growth of the mandible in miniature pigs using cone-beam computerized tomography (CBCT). The mandibles of the pigs were CBCT-scanned monthly over 12 months, and the 3D mandibular models were reconstructed. A new non-linear, time-dependent osteometric modeling approach was developed to register two consecutive mandible models by searching for the corresponding points with the highest likelihood of matching the anatomical and morphological features so that the morphological changes patterns for each month could be described using color maps on the models. The morphological changes of the mandible were found to decrease anteriorly, with the condyle region and the posterior part of the ramus growing faster than the rest of the mandible. The condyle region showed the fastest growth rate and the posterior ramus the second during the growth period, while the middle and anterior corpus regions showed the slowest growth rates. In conclusion, the current results revealed the non-linear patterns and rates of morphological changes in different growth regions and the whole mandible. The new approach may also be useful for future studies on the growth of the mandible in other animals.

Transplantation of Mature Adipocyte-Derived Dedifferentiated Fat Cells Facilitates Periodontal Tissue Regeneration of Class II Furcation Defects in Miniature Pigs

Adipose tissue is composed mostly of adipocytes that are in contact with capillaries. By using a ceiling culture method based on buoyancy, lipid-free fibroblast-like cells, also known as dedifferentiated fat (DFAT) cells, can be separated from mature adipocytes with a large single lipid droplet. DFAT cells can re-establish their active proliferation ability and transdifferentiate into various cell types under appropriate culture conditions. Herein, we sought to compare the regenerative potential of collagen matrix alone (control) with autologous DFAT cell-loaded collagen matrix transplantation in adult miniature pigs (microminipigs; MMPs). We established and transplanted DFAT cells into inflammation-inducing periodontal class II furcation defects. At 12 weeks after cell transplantation, a marked attachment gain was observed based on the clinical parameters of probing depth (PD) and clinical attachment level (CAL). Additionally, micro computed tomography (CT) revealed hard tissue formation in furcation defects of the second premolar. The cemento-enamel junction and alveolar bone crest distance was significantly shorter following transplantation. Moreover, newly formed cellular cementum, well-oriented periodontal ligament-like fibers, and alveolar bone formation were observed via histological analysis. No teratomas were found in the internal organs of recipient MMPs. Taken together, these findings suggest that DFAT cells can safely enhance periodontal tissue regeneration.

Local Irradiation of Mouse Tooth Germ Gives Insight into the Direct Effects of Irradiation on Root Development

To elucidate the mechanism underlying the failure of root formation after irradiation, we established a method of local irradiation of the molar tooth germ and demonstrated that radiation directly affected dental root development. In the current study, to locally irradiate the lower first molars of 5-day-old C57BL/6J mice, we used lead glass containing a hole as a collimator. We confirmed that our local irradiation method targeted only the tooth germ. The irradiated root was immature in terms of apical growth, and dentin formation was irregular along the outside of the root apices. Moreover, calcified tissue apically surrounded Hertwig's epithelial root sheath, which disappeared abnormally early. This method using a local irradiation experimental model will facilitate research into radiation-induced disorders of dental root formation.

Establishment of Pulp Damage Repair Models in Miniature Pigs Using Diode Lasers

Objective: To establish a controlled pulp damage repair model in miniature pigs by using a diode laser. Background: Laser is a novel kind of controllable energy, and it is widely used in dentistry. Methods: The premolars of four 24- to 28-month-old miniature pigs were divided into three laser groups, according to the output powers of a diode laser, and the nonirradiated first molars acted as controls. The teeth in laser groups were irradiated under three parameters (output powers 1.5, 2.5, 4 W, continuous wave, frequency 50 Hz for 60 sec). The dental and gingival morphology was observed at 0, 7, 14, and 21 days after laser irradiation. The animals were sacrificed for qualitative and quantitative pulp histopathological analysis. Results: The three laser groups present no seriously irreversible dental and gingival damage. In the 1.5-W group, dental pulp exhibited angiectasis and hyperemia with no inflammation, and did not significantly differ with the control groups at 21 days (p > 0.05). In the 2.5-W group, pulpal inflammation was highest at 7 days and then decreased significantly at 21 days, and the tissue repair appeared at 14 days (p < 0.05). In the 4-W group, pulpal inflammation was significantly highest at 7 days, with an increase in the degree of tissue repair (p < 0.05). Conclusions: The output power of 1.5 W developed a reversible pulpitis model; the output powers of 2.5 and 4 W within 7 days led to the development of irreversible pulpitis models, which proceeded as chronic pulpitis with obvious tissue repair.

Dental Pathology of the Domestic Pig (Sus Scrofa Domesticus)

Antemortem domestic pig (Sus scrofa domesticus) dental pathology literature is sparse. This observational descriptive study evaluated 23 client-owned pigs that while sedated/anesthetized for routine annual care had intraoral dental radiographs and an oral examination performed. Age, gender, weight, and breed for each pig were recorded. Oral examination and radiographic findings were reviewed to create a comprehensive list of dental abnormalities identified. Descriptive statistics were performed to summarize the data. The study population included 14 castrated males and 20 Vietnamese pot-bellied mini-pigs. The median age was 3 years (range 2-12 years), and the median weight was 39 kg (range 11-140 kg). The most common finding was missing teeth (21/23 pigs); the first premolar tooth was the most likely to be absent (64/106 missing teeth). Periodontal disease was common (20/23 pigs). Advanced stages primarily affected the first molar teeth frequently in the form of a mucogingival defect. Supernumerary roots were discovered on the maxillary canine teeth in female pigs only (10/25 teeth with supernumerary roots). The most common persistent deciduous tooth was the maxillary second incisor (15/19 persistent deciduous teeth). Non-age or gender related open apices were most likely associated with mandibular first and second incisor teeth (26/96 teeth with open apices). Tooth resorption was also identified (7/23 pigs). The study findings prove that pet pigs commonly have dental pathology; therefore, thorough oral examinations with intraoral radiographs should be included in porcine routine health care regimens.

Ten Years of Micro-CT in Dentistry and Maxillofacial Surgery: A Literature Overview

Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructive three-dimensional (3D) qualitative and quantitative analysis by the observation of microstructures with high resolution. This paper aims at delivering a structured overview of literature about studies performed using micro-CT in dentistry and maxillofacial surgery (MFS) by analyzing the entire set of articles to portray the state of the art of the last ten years of scientific publications on the topic. It draws the scenario focusing on biomaterials, in vitro and in/ex vivo applications, bone structure analysis, and tissue engineering. It confirms the relevance of the micro-CT analysis for traditional research applications and mainly in dentistry with respect to MFS. Possible developments are discussed in relation to the use of the micro-CT combined with other, traditional, and not, techniques and technologies, as the elaboration of 3D models based on micro-CT images and emerging numerical methods. Micro-CT results contribute effectively with whose ones obtained from other techniques in an integrated multimethod approach and for multidisciplinary studies, opening new possibilities and potential opportunities for the next decades of developments.

[Structural characteristics of the deciduous teeth of Tibetan miniature pigs]

OBJECTIVE

To explore the histological structure of the deciduous teeth and the tooth germs of Tibetan miniature pigs for studies of dental tissue diseases and tooth regeneration.

METHODS

The structure of the deciduous teeth of Tibetan miniature pigs was observed by X-ray. The ultrastructure of the enamel and dentin of deciduous teeth was characterized by scanning electron microscopy. The jaws and teeth were three-dimensionally reconstructed using Mimics software based on Micro-CT scanning of the deciduous teeth. Image J software was used to calculate the gray value and the mineralization density of the deciduous teeth. Hisotological structure of the tooth germ and the pulp tissue of Tibetan miniature pigs was observed using HE staining.

RESULTS

The deciduous teeth of Tibetan miniature pigs were composed of enamel, dentin and medullary pulp tissue. The permanent tooth germ were formed during the deciduous dentition. The enamel and dentin ultrastructure of deciduous teeth were consistent with that of human deciduous teeth. The enamel and dentin mineralization densities were 2.47±0.09 g/cm³ and 1.72±0.07 g/cm³, respectively. The pathological structures of tooth germ and pulp tissue were similar to those of human teeth, and the pulp tissue of the deciduous teeth was in an undifferentiated state.

CONCLUSIONS

The deciduous teeth of Tibetan miniature pig have similar anatomy, ultrastructure and histopathological structure to human teeth and can serve as a good animal model for studying human dental tissue diseases and the mechanisms of tooth regeneration.

Experimental tricalcium silicate cement induces reparative dentinogenesis

OBJECTIVES

To overcome shortcomings of hydraulic calcium-silicate cements (hCSCs), an experimental tricalcium silicate (TCS) cement, named 'TCS 50', was developed. In vitro research showed that TCS 50 played no negative effect on the viability and proliferation of human dental pulp cells, and it induced cell odontogenic differentiation. The objective was to evaluate the pulpal repair potential of TCS 50 applied onto exposed minipig pulps.

METHODS

Twenty permanent teeth from three minipigs were mechanically exposed and capped using TCS 50; half of the teeth were scheduled for 7-day and the other half for 70-day examination (n=10). Commercial hCSCs ProRoot MTA and TheraCal LC were tested as references (n=8). Tooth discoloration was examined visually. After animal sacrifice, the teeth were scanned using micro-computed tomography; inflammatory response at day 7 and day 70, mineralized tissue formation at day 70 were assessed histologically.

RESULTS

Up to 70 days, TCS 50 induced no discoloration, ProRoot MTA generated gray/black discoloration in all teeth. For TCS 50, 40.0% pulps exhibited a mild/moderate inflammation at day 7. No inflammation was detected and complete reparative dentin with tubular structures was formed in all pulps after 70 days. ProRoot MTA induced a similar response, TheraCal LC generated a less favorable response in terms of initial inflammation and reparative dentin formation; however, these differences were not significant (Chi-square test of independence: p>0.05).

SIGNIFICANCE

TCS 50 induced reparative dentinogenesis in minipig pulps. It can be considered as a promising pulp-capping agent, also for aesthetic areas.

An ontogenetic perspective on symphyseal fusion, occlusion and mandibular loading in alpacas (Vicugna pacos)

A primary hypothesis for the evolution of mandibular symphyseal fusion in some mammals is that it functions to resist loads incurred during routine mastication. Anecdotal support for this hypothesis is based on the fact that when the symphysis fuses, it typically does so early during postnatal ontogeny prior to or around the time of weaning. However, little is known about the process of fusion, particularly relative to feeding behaviors and the dynamics of mastication, including occlusion and masticatory loading. In the present study, we investigate the timing and process of symphyseal fusion in alpacas (Vicugna pacos) in the context of maturation of the oral apparatus and oral behavior. We also report on in vivo strains from the symphysis and corpus in young alpacas prior to and following full fusion and M₁ occlusion. Results show that fusion begins rostrally by 1 month and is complete by 6-7 months whereas all deciduous premolars and M₁ come into occlusion by 6 months. Although symphyseal loading patterns are maintained throughout ontogeny, in young alpacas symphyseal strain magnitudes are low compared with adults but corpus strain magnitudes are comparable to those found in adults. Reduced symphyseal loading in young individuals is contrary to what might be predicted given that the symphysis is still fusing. When considered in light of the development of occlusion and rumination, strain magnitudes may be necessarily low and reflect an overall delay in the maturation of masticatory dynamics.

Isolation and characterization of embryonic ameloblast lineage cells derived from tooth buds of fetal miniature swine

Dental enamel formation, known as "amelogenesis," is initiated by cytodifferentiation of the ectodermally derived dental epithelium. Enamel cannot regenerate itself because once it is completely formed, ameloblasts are lost as the tooth erupts. Rodent teeth have been useful for studying the mechanisms of amelogenesis because ameloblast cell lines can be derived from the ever-growing incisors. However, higher mammals such as humans have no growing teeth, and cell lines derived from larger animals that are more similar to humans are required for higher fidelity studies. Here, we isolated embryonic enamel epithelium-derived epithelial cells from fetal swine. The explant culture of the developing deciduous molars that had been removed from the dental papilla-derived mesenchymal tissue and cells inside the tooth buds provided the epithelial cell population for the primary culture. To isolate the cell population, we performed a unique cell isolation technique called cell fishing. The isolated cells showed clear embryonic-stage ameloblast characteristics with appropriate gene/protein expressions of enamel matrix and proteinases, abundant glycogen pools, and secretory granular materials. They could be continuously subcultured several times and are presently being maintained. This cell population will facilitate the establishment of a stable cell line and allow us to characterize the definitive phenotype and functional behavior of porcine ameloblasts, which, in turn, promises to yield useful and practical findings that are more relevant than those provided by rodent studies. Finally, analysis of in vitro enamel formation will be important for engineering "bio-enamel" as a new dental therapy to restore enamel defects.

Comparison of measurements of mandible growth using cone beam computed tomography and its synthesized cephalograms

BACKGROUND

The current study aimed to compare the measurements of the mandible morphology using 3D cone beam computed tomography (CBCT) images with those using 2D CBCT-synthesized cephalograms; to quantify errors in measurements based on 2D synthesized cephalograms; and to clarify the effects such errors have on the description of the mandibular growth.

METHODS

Mandibles of six miniature pigs were scanned monthly using CBCT over 12 months and the data were used to reconstruct the 3D bone models. Five anatomical landmarks were identified on each bone model, and the inter-marker distances and monthly distance changes were calculated and taken as the gold standard. Synthetic 2D cephalograms were also generated for each bone model using a digitally reconstructed radiography (DRR)-generation method. Errors in cephalogram measurements were determined as the differences between the calculated variables in cephalograms and the gold standard. The variations between cephalograms and the gold standard were also compared using paired t-tests.

RESULTS

While the inter-marker distance increases varied among the marker pairs, all marker pairs increased their inter-marker distances gradually every month, reaching 50% of the total annual increases during the fourth and fifth months, and then slowing down in the subsequent months. The 2D measurements significantly underestimated most of the inter-marker distances throughout the monitoring period, in most of the monthly inter-marker distance changes during the first four months, and in the total growth (p < 0.05).

CONCLUSIONS

Significant errors exist in the measurements using 2D synthesized cephalogram, underestimating the mandibular dimensions and their monthly changes in the early stages of growth, as well as the total annual growth. These results should be considered in dental treatment planning at the beginning of the treatment in order to control more precisely the treatment process and outcome.