Oligo(p-phenylene-ethynylene)-derived super-π-gelators with tunable emission and self-assembled polymorphic structures

Oligo(phenyleneethynylene)s: Shape-Tunable Building Blocks for Supramolecular Self-Assembly

Oligo(phenyleneethynylene)s (OPEs) have attracted widespread attention due to their remarkable (opto)electronic and photophysical properties, which have enabled numerous applications. The versatile functionalization possibilities of OPEs make them unique candidates to form various shape-persistent geometries, including linear, triangular, rectangular, hexagonal and macrocyclic. However, as a result of this structural variety, it is oftentimes challenging to correlate molecular design with self-assembly properties. In this minireview, we have classified OPEs based on their molecular shapes and correlated them with their self-assembly behavior in solution. Particularly, we provide important insights into the aggregation propensity of the different molecular shapes and how to tune the association strength using various non-covalent interactions. Our classification will enable a better understanding of the structure-property correlation in OPEs, which is key to develop supramolecular functional materials.

Self-assembled organic and hybrid materials derived from oligo-(p-phenyleneethynylenes)

Oligo-(p-Phenyleneethynylenes) (OPEs) have garnered widespread interest over the past three decades due to their excellent opto-electronic properties. However, the chief focus has been on the use of mainly small molecules or polymeric systems for the study of their structural diversity in opto-electronic applications. Recently, researchers have started delving deeper into their utility in material applications. Purely organic materials such as supramolecular polymers, self-assembled nanostructures, nanostructured organogels and single-crystalline materials derived from OPEs have already been developed and researched. Chirality has also been introduced into these systems. Additionally, these have shown physical properties such as polymorphism, liquid crystallinity, melt formation, mechanochromism, etc. All these materials have also shown excellent luminescence properties with high quantum yield and some have even shown energy harvesting properties. There have also been sporadic reports on OPE linker based hybrid systems such as metallogels and metal-organic framework (MOF) structures where structural analysis reveals the origin of tunable emission in these materials. Furthermore, by innovative structural design, unexplored properties of OPEs such as water repellency, bioimaging, drug delivery, photocatalysis, energy transfer, nanomorphology control, photoconductivity, and colour tunability could be achieved. This feature article will, therefore, encompass a detailed discussion on the development of this field as well as the analysis of the properties realized in OPE derived self-assembled supramolecular materials. The main focus will be on the following classes of materials: soft supramolecular materials, crystalline supramolecular π-systems, nanoscale metal-organic frameworks (NMOFs) and bulk metal-organic frameworks (MOFs) and how their application horizon has been expanded by integrating OPEs into their structures.

Supramolecular Glycolipid-Based Hydro-/Organogels with Enzymatic Bioactive Release Ability by Tuning the Chain Length and Headgroup Size

Designing of supramolecular hydro-/organogels having desired properties, biocompatibility, and stimuli responsiveness is a challenging task. Herein, the gelation ability of amphiphilic glycolipid-based gelators in a wide range of solvents is explored. The structure-function relationship was established by varying the chain length and polar headgroup size of amphiphilic gelators. The prepared hydro-/organogels were characterized by employing several techniques such as differential scanning calorimetry (DSC), rheology, field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), etc. The thermal stability of hydro-/organogels increased with an increase in chain length. Rheological analysis depicted that variation in chain length and headgroup size of amphiphilic gelators significantly affected the gel strength and stability. The self-assembled morphology of hydro-/organogel samples revealed the compact entangled fibrillar network structures. After comparing the energy-minimized molecular length with the d-spacing value obtained by XRD, interdigitated bilayer packing in the gel network was established. The bioactive encapsulation and enzymatic release study of hydro-/organogels portrayed their potential application in the biomedical field. To our delight, glycolipid 16M (C16 chain length) formed a molecular hydrogel with injectable and thixotropic behaviors. High critical strain value, thixotropy, injectability, thermoreversibility, and faster bioactive release for the 16M-W hydrogel proved crucial to predict its future applications. Overall, glycolipid amphiphiles designed by upholding proper hydrophilic-lipophilic balance can form multifunctional supramolecular hydrogels with excellent implementation in the drug delivery system.

Understanding the role of conjugation length on the self-assembly behaviour of oligophenyleneethynylenes

Oligophenyleneethynylenes (OPEs) are prominent building blocks with exciting optical and supramolecular properties. However, their generally small spectroscopic changes upon aggregation make the analysis of their self-assembly challenging, especially in the absence of additional hydrogen bonds. Herein, by investigating a series of OPEs of increasing size, we have unravelled the role of the conjugation length on the self-assembly properties of OPEs.

Self-Assembled Extended π-Systems for Sensing and Security Applications

Molecules and materials derived from self-assembled extended π-systems have strong and reversible optical properties, which can be modulated with external stimuli such as temperature, mechanical stress, ions, the polarity of the medium, and so on. In many cases, absorption and emission responses of self-assembled supramolecular π-systems are manifested several times higher when compared with the individual molecular building blocks. These properties of molecular assemblies encourage scientists to have a deeper understanding of their design to explore them for suitable optoelectronic applications. Therefore, it is important to bring in highly responsive optical features in π-systems, for which it is necessary to modify their structures by varying the conjugation length and by introducing donor-acceptor functional groups. Using noncovalent forces, π-systems can be put together to form assemblies of different shapes and sizes with varied optical band gaps through controlling intermolecular electronic interactions. In addition, using directional forces, it is possible to bring anisotropy to the self-assembled nanostructures, facilitating efficient exciton migration, resulting in the modulation of optical and electron-transport properties. In this Account, we mainly summarize our findings with optically tunable self-assemblies of extended π-systems such as p-phenylenevinylenes (PVs), p-phenyleneethynylenes (PEs), and diketopyrrolopyrroles (DPPs) as different stimuli-responsive platforms to develop sensors and security materials. We start with how PV self-assemblies and their coassemblies with appropriate electron-deficient systems can be used for the sensing of analytes in contact mode or in the vapor phase. For example, whereas the PV having electron-deficient terminal groups has high sensitivity toward trinitrotoluene (TNT) in contact mode, the supercoiled fibers formed by the coassembly of self-sorted stacks of C₃-symmetrical PV and C₃-symmetrical electron-deficient perylene bisimide are capable of sensing vapors of nitrobenzene and o-toluidine. The power of different functional groups in combination with PVs has been further illustrated by attaching CO₂-sensitive tertiary amine moieties to a cyano-substituted PV, which allowed the bimodal detection of CO₂ using fluorescence and Raman spectroscopy. Interestingly, the functionalization of PVs with terminal amide groups and chiral alkoxy side chains provided a mechanochromic system that allows self-erasable imaging. Whereas PVs exhibit quenching of fluorescence in most cases during self-assembly, PE derivatives exhibit aggregation-induced emission. This property of PEs has been exploited for the development of stimuli-responsive security materials, especially for currency and documents. For instance, the blue fluorescence of a PE attached to hydrophilic oxyethylene side chains coated on a filter paper upon contact with water changes to cyan emission due to the change in the molecular packing. Interestingly, the molecular packing of a Bodipy-attached PE-based gelator allowed a stress-induced change in the emission behavior, resulting in strong near-infrared (NIR) emission upon the application of mechanical stress or gelation. Finally, the use of DPP-based π-systems for the development of NIR transparent optical filters that block UV-vis light and their security- and forensic-related applications are described. These selected examples of the π-system self-assemblies provide an idea of the current status and future opportunities for scientists interested in this field of self-assembly and soft materials research.

Interplay between H-Bonding and Preorganization in the Evolution of Self-Assembled Systems

Cooperative π-π interactions and H-bonding are frequently exploited in supramolecular polymerization; however, close scrutiny of their mutual interplay has been largely unexplored. Herein, we compare the self-assembly behavior of a series of C2 - and C3 -symmetrical oligophenyleneethynylenes differing in their amide topology (N- or C-centered). This subtle structural modification brings about drastic changes in their photophysical and supramolecular properties, highlighting the reciprocal impact of H-bonding vs. preorganization on the evolution and final outcome of supramolecular systems.

Hierarchical self-assembly of a fluorescence emission-enhanced organogelator and its multiple stimuli-responsive behaviors

A discrete hexagonal metallacycle 1 decorated with tetraphenylethylene, amide groups and long hydrophobic alkyl chains was constructed via [3 + 3] coordination-driven self-assembly, from which the fluorescence emission-enhanced organogelator with multiple stimuli-responsiveness was successfully prepared via hierarchical self-assembly.

A sensitive and selective sensor for picric acid detection with a fluorescence switching response

Low molecular weight organogelator for the detection of picric acid.

The Helix to Super-Helix Transition in the Self-Assembly of π-Systems: Superseding of Molecular Chirality at Hierarchical Level

Higher-order super-helical structures derived from biological molecules are known to evolve through opposite coiling of the initial helical fibers, as seen in collagen protein. A similar phenomenon is observed in a π-system self-assembly of chiral oligo(phenyleneethylene) derivatives (S)-1 and (R)-1 that explains the unequal formation of both left- and right-handed helices from molecule having a specific chiral center. Concentration- and temperature-dependent circular dichroism (CD) and UV/Vis spectroscopic studies revealed that the initial formation of helical aggregates is in accordance with the molecular chirality. At the next level of hierarchical self-assembly, coiling of the fibers occurs with opposite handedness, thereby superseding the command of the molecular chirality. This was confirmed by solvent-dependent decoiling of super-helical structures and concentration-dependent morphological analysis.

Synthesis, Optoelectronic and Self-Assembly Properties of Diazadioxaacene Derivatives

Two novel diazadioxaacene derivatives (ADOP and ADOQ) have been successfully synthesized and characterized. Their single crystal analyses disclose that molecule ADOP forms a twisted topology configuration, whereas ADOQ adopts reclining-chair architecture. Both of them emit strong blue fluorescence in organic solvents. Moreover, they can self-assemble to form regular nanobelts and nanowires, respectively, via a simple surfactant-assisted method.

Dual-responsive ALS-type organogelators based on azobenzene–cholesteryl conjugates and their self-assemblies

Azobenzene and cholesteryl based derivatives (N2 and N4) were designed as gelators and their aggregation mechanism is proposed. These gelators are thermally reversible, however optically irreversible.

Liquid-Crystalline Star-Shaped Supergelator Exhibiting Aggregation-Induced Blue Light Emission

A family of closely related star-shaped stilbene-based molecules containing an amide linkage are synthesized, and their self-assembly in liquid-crystalline and gel states was investigated. The number and position of the peripheral alkyl tails were systematically varied to understand the structure-property relation. Interestingly, one of the molecules with seven peripheral chains was bimesomorphic, exhibiting columnar hexagonal and columnar rectangular phases, whereas the rest of them stabilized the room-temperature columnar hexagonal phase. The self-assembly of these molecules in liquid-crystalline and organogel states is extremely sensitive to the position and number of alkoxy tails in the periphery. Two of the compounds with six and seven peripheral tails exhibited supergelation behavior in long-chain hydrocarbon solvents. One of these compounds with seven alkyl chains was investigated further, and it has shown higher stability and moldability in the gel state. The xerogel of the same compound was characterized with the help of extensive microscopic and X-ray diffraction studies. The nanofibers in the xerogel are found to consist of molecules arranged in a lamellar fashion. Furthermore, this compound shows very weak emission in solution but an aggregation-induced emission property in the gel state. Considering the dearth of solid-state blue-light-emitting organic materials, this molecular design is promising where the self-assembly and emission in the aggregated state can be preserved. The nonsymmetric design lowers the phase-transition temperatures.The presence of an amide bond helps to stabilize columnar packing over a long range because of its polarity and intermolecular hydrogen bonding in addition to promoting organogelation.

Time-dependent gel to gel transformation of a peptide based supramolecular gelator

A dipeptide with a long fatty acid chain at its N-terminus gives hydrogels in phosphate buffer in the pH range 7.0-8.5. The hydrogel with a gelator concentration of 0.45% (w/v) at pH 7.46 (physiological pH) provides a very good platform to study dynamic changes within a supramolecular framework as it exhibits remarkable change in its appearance with time. Interestingly, the first formed transparent hydrogel gradually transforms into a turbid gel within 2 days. These two forms of the hydrogel have been thoroughly investigated by using small angle X-ray scattering (SAXS), powder X-ray diffraction (PXRD), field emission scanning electron microscopic (FE-SEM) and high-resolution transmission electron microscopic (HR-TEM) imaging, FT-IR and rheometric analyses. The SAXS and low angle PXRD studies substantiate different packing arrangements for the gelator molecules for these two different gel states (the freshly prepared and the aged hydrogel). Moreover, rheological studies of these two gels reveal that the aged gel is stiffer than the freshly prepared gel.

π-Conjugated diimidazolium salts: rigid structure to obtain organized materials

The photophysical properties and aggregation ability of π-conjugated diimidazolium salts were studied in solution and in the solid state. Experimental investigations were supported by DFT calculations.

Peptide-Nanofiber-Supported Palladium Nanoparticles as an Efficient Catalyst for the Removal of N-Terminus Protecting Groups

Sonication-induced tryptophan- and tyrosine-based peptide bolaamphiphile nanofibers have been used to synthesize and stabilize Pd nanoparticles under physiological conditions. The peptide bolaamphiphile self-assembly process has been thoroughly studied by using several spectroscopic and microscopic techniques. The stiffness of the soft hydrogel matrix was measured by an oscillatory rheological experiment. FTIR and circular dichroism (CD) experiments revealed a hydrogen-bonded β-sheet conformation of peptide bolaamphiphile molecules in a gel-phase medium. The π-π stacking interactions also played a crucial role in the self-assembly process, which was confirmed by fluorescence spectroscopy. Electron (SEM and TEM) and atomic force microscopy (AFM) studies showed that the peptide bolaamphiphile molecules self-assemble into nanofibrillar structures. Pd nanoparticles were synthesized in the hydrogel matrix in which redox-active tryptophan and tyrosine residues reduce the metal ions to metal nanoparticles. The size of the Pd nanoparticles are in the range of 3-9 nm, and are stabilized by peptide nanofibers. The peptide-nanofiber-supported Pd nanoparticles have shown effective catalytic activity for the removal of N-terminus protecting groups of amino acids and peptides.

Polymorphism, fluorescence, and optoelectronic properties of a borazine derivative

We have prepared a new borazine derivative that bears mesityl substituents at the boron centers and displays exceptional chemical stability. Detailed crystallographic and solid-state fluorescence characterizations revealed the existence of several polymorphs, each of which showed different emission profiles. In particular, a bathochromic shift is observed when going from the lower- to the higher-density crystal. Computational investigations of the conformational dynamics of borazine 1 in both the gas phase and in the solid state using molecular dynamics (MD) simulations showed that the conformation of the peripheral aryl groups significantly varies when going from an isolated molecule (in which the rings are able to flip over the 90° barrier at RT) to the crystals (in which the rotation is locked by packing effects), thus generating specific nonsymmetric intermolecular interactions in the different polymorphs. To investigate the optoelectronic properties of these materials by fabrication and characterization of light-emitting diodes (LEDs) and light-emitting electrochemical cells (LECs), borazine 1 was incorporated as the active material in the emissive layer. The current and radiance versus voltage characteristics, as well as the electroluminescence spectra reported here for the first time are encouraging prospects for the engineering of future borazine-based devices.