Self-Assembly of Aniline Oligomers

In-Situ Coating of Iron with a Conducting Polymer, Polypyrrole, as a Promise for Corrosion Protection

Iron microparticles were coated with polypyrrole in situ during the chemical oxidation of pyrrole with ammonium peroxydisulfate in aqueous medium. A series of hybrid organic/inorganic core-shell materials were prepared with 30-76 wt% iron content. Polypyrrole coating was revealed by scanning electron microscopy, and its molecular structure and completeness were proved by FTIR and Raman spectroscopies. The composites of polypyrrole/carbonyl iron were obtained as powders and characterized with respect to their electrical properties. Their resistivity was monitored by the four-point van der Pauw method under 0.01-10 MPa pressure. In an apparent paradox, the resistivity of composites increased from the units Ω cm for neat polypyrrole to thousands Ω cm for the highest iron content despite the high conductivity of iron. This means that composite conductivity is controlled by the electrical properties of the polypyrrole matrix. The change of sample size during the compression was also recorded and provides a parameter reflecting the mechanical properties of composites. In addition to conductivity, the composites displayed magnetic properties afforded by the presence of iron. The study also illustrates the feasibility of the polypyrrole coating on macroscopic objects, demonstrated by an iron nail, and offers potential application in the corrosion protection of iron. The differences in the morphology of micro- and macroscopic polypyrrole objects are described.

Linear and star-shaped π-conjugated oligoanilines: a review on molecular design in syntheses and properties

Molecular Design and Synthesis of Linear and Star-shaped π-conjugated Oligoanilines with reversible optoelectrochemical properties.

Conductive biomaterials for muscle tissue engineering

Muscle tissues are soft tissues that are of great importance in force generation, body movements, postural support and internal organ function. Muscle tissue injuries would not only result in the physical and psychological pain and disability to the patient, but also become a severe social problem due to the heavy financial burden they laid on the governments. Current treatments for muscle tissue injuries all have their own severe limitations and muscle tissue engineering has been proposed as a promising therapeutic strategy to treat with this problem. Conductive biomaterials are good candidates as scaffolds in muscle tissue engineering due to their proper conductivity and their promotion on muscle tissue formation. However, a review of conductive biomaterials function in muscle tissue engineering, including the skeletal muscle tissue, cardiac muscle tissue and smooth muscle tissue regeneration is still lacking. Here we reviewed the recent progress of conductive biomaterials for muscle regeneration. The recent synthesis and fabrication methods of conductive scaffolds containing conductive polymers (mainly polyaniline, polypyrrole and poly(3,4-ethylenedioxythiophene), carbon-based nanomaterials (mainly graphene and carbon nanotube), and metal-based biomaterials were systematically discussed, and their application in a variety of forms (such as hydrogels, films, nanofibers, and porous scaffolds) for different kinds of muscle tissues formation (skeletal muscle, cardiac muscle and smooth muscle) were summarized. Furthermore, the mechanism of how the conductive biomaterials affect the muscle tissue formation was discussed and the future development directions were included.

Some Important Issues of the Commercial Production of 1-D Nano-PANI

One-dimensional polyaniline nano-materials (1-D nano-PANI) have great promise applications in supercapacitors, sensors and actuators, electrochromic devices, anticorrosive coatings, and other nanometer devices. Consequently, commercial production of 1-D nano-PANI at large-scale needs to be quickly developed to ensure widespread usage of this material. Until now, approaches-including hard template methods, soft template methods, interfacial polymerization, rapid mixing polymerization, dilute polymerization, and electrochemical polymerization-have been reported to be used to preparation of this material. Herein, some important issues dealing with commercial production of 1-D nano-PANI are proposed based on the complexity of the synthetic process, its characters, and the aspects of waste production and treatment in particular. In addition, potential solutions to these important issues are also proposed.

Chiral Polyaniline Hollow Nanotwists toward Efficient Enantioselective Separation of Amino Acids

Controllable fabrication of complex chiral nanostructures of functional materials from achiral systems remains a great challenge. Herein, polyaniline (PANI) hollow nanotwists as complex chiral nanostructures have been prepared by chemical oxidation of aniline in an achiral HCl/isopropyl alcohol/water mixed solvent. The chiral oligoaniline twisted nanoribbons generated at the early reaction stage have been established to act as reactive sacrificial templates for inducing the growth of PANI hollow nanotwists. Single-handed PANI hollow nanotwists achieved by tuning the alcohol content in the solvent have been applied to separate several chiral amino acids from their racemic mixtures with high performance, indicating their high potential for enantioselective separation applications.

Construction and biological evaluation of different self-assembled nanoarchitectures of FZU-03,010

Chemotherapy is currently one of the promising therapeutic methods for non-small-cell lung cancer (NSCLC), but the emergence of multidrug resistance (MDR) is the greatest obstacle to efficient drug delivery for successful chemotherapy. Nanotechnology-based drug delivery holds great promise to promote intracellular drug delivery to reverse MDR. In this work, we used our previously synthesized ursolic acid (UA) derivative, FZU-03,010 (F3), to prepare nanodrugs of F3 with different architectures and study the role of the structure on the physiochemical properties and the biological effects against A549 and its PTX-resistant A549/PTX lung cancer cells. Using different preparation methods, amphiphilic F3 could self-assemble into different structures such as nanoaggregates (F3-NA), vesicles (F3-VC), or nanoparticles (F3-NP) with different physiochemical properties. The self-assembled nanodrugs could be utilized for the entrapment of fluorophores and showed different cellular uptake efficiencies. The cytotoxicity results demonstrated that compared with UA, F3-NA and F3-NP could suppress A549 and A549/PTX cells viability more potently at lower concentration. In addition, F3-NA and F3-NP could induce G1 cell cycle arrest, cell apoptosis and caspase-3 activation more efficiently than that of UA. Furthermore, F3-NA and F3-NP could effectively inhibit PI3K/Akt pathway and decrease the expression of Bcl-2 and the cell cycle-dependent kinase inhibitors p-ERK1/2 and Cyclin D1 in both A549 and A549/PTX cells. In conclusion, our results suggest that the UA derivative F3 is more potent in inhibiting cancer cell proliferation, and F3-NA and F3-NP have the potential to be developed as a therapeutic agent for resistant NSCLC cells.

Oligoaniline-based conductive biomaterials for tissue engineering

The science and engineering of biomaterials have improved the human life expectancy. Tissue engineering is one of the nascent strategies with an aim to fulfill this target. Tissue engineering scaffolds are one of the most significant aspects of the recent tissue repair strategies; hence, it is imperative to design biomimetic substrates with suitable features. Conductive substrates can ameliorate the cellular activity through enhancement of cellular signaling. Biocompatible polymers with conductivity can mimic the cells' niche in an appropriate manner. Bioconductive polymers based on aniline oligomers can potentially actualize this purpose because of their unique and tailoring properties. The aniline oligomers can be positioned within the molecular structure of other polymers, thus painter acting with the side groups of the main polymer or acting as a comonomer in their backbone. The conductivity of oligoaniline-based conductive biomaterials can be tailored to mimic the electrical and mechanical properties of targeted tissues/organs. These bioconductive substrates can be designed with high mechanical strength for hard tissues such as the bone and with high elasticity to be used for the cardiac tissue or can be synthesized in the form of injectable hydrogels, particles, and nanofibers for noninvasive implantation; these structures can be used for applications such as drug/gene delivery and extracellular biomimetic structures. It is expected that with progress in the fields of biomaterials and tissue engineering, more innovative constructs will be proposed in the near future. This review discusses the recent advancements in the use of oligoaniline-based conductive biomaterials for tissue engineering and regenerative medicine applications.

STATEMENT OF SIGNIFICANCE

The tissue engineering applications of aniline oligomers and their derivatives have recently attracted an increasing interest due to their electroactive and biodegradable properties. However, no reports have systematically reviewed the critical role of oligoaniline-based conductive biomaterials in tissue engineering. Research on aniline oligomers is growing today opening new scenarios that expand the potential of these biomaterials from "traditional" treatments to a new era of tissue engineering. The conductivity of this class of biomaterials can be tailored similar to that of tissues/organs. To the best of our knowledge, this is the first review article in which such issue is systematically reviewed and critically discussed in the light of the existing literature. Undoubtedly, investigations on the use of oligoaniline-based conductive biomaterials in tissue engineering need further advancement and a lot of critical questions are yet to be answered. In this review, we introduce the salient features, the hurdles that must be overcome, the hopes, and practical constraints for further development.

Preparation and Characterization of WS₂@SiO₂ and WS₂@PANI Core-Shell Nanocomposites

Two tungsten disulfide (WS₂)-based core-shell nanocomposites were fabricated using readily available reagents and simple procedures. The surface was pre-treated with a surfactant couple in a layer-by-layer approach, enabling good dispersion of the WS₂ nanostructures in aqueous media and providing a template for the polymerization of a silica (SiO₂) shell. After a Stöber-like reaction, a conformal silica coating was achieved. Inspired by the resulting nanocomposite, a second one was prepared by reacting the surfactant-modified WS₂ nanostructures with aniline and an oxidizing agent in an aqueous medium. Here too, a conformal coating of polyaniline (PANI) was obtained, giving a WS₂@PANI nanocomposite. Both nanocomposites were analyzed by electron microscopy, energy dispersive X-ray spectroscopy (EDS) and FTIR, verifying the core-shell structure and the character of shells. The silica shell was amorphous and mesoporous and the surface area of the composite increases with shell thickness. Polyaniline shells slightly differ in their morphologies dependent on the acid used in the polymerization process and are amorphous like the silica shell. Electron paramagnetic resonance (EPR) spectroscopy of the WS₂@PANI nanocomposite showed variation between bulk PANI and the PANI shell. These two nanocomposites have great potential to expand the use of transition metals dichalcogenides (TMDCs) for new applications in different fields.

Electrochemical Preparation of Polyaniline Nanowires with the Used Electrolyte Solution Treated with the Extraction Process and Their Electrochemical Performance

Electrochemical polymerization of aniline is one of the most promising methods to prepare polyaniline (PANI) materials. However, during this process, the electrolyte solution must be replaced after electropolymerization of a certain time because of the generation and the accumulation of the by-products, which have significant effects on the morphology, purity and properties of PANI products. Treatment and recycling of the used electrolyte solution are worthwhile to study to reduce the high treatment cost of the used electrolyte solution containing aniline and its polymerization by-products. Here, the composition of the used electrolyte solution was separated and determined by high performance liquid chromatography coupled with diode array detection (HPLC-DAD) in the range of ultraviolet and visible (UV-Vis) light. The analysis results revealed that the used electrolyte solution consisted of aniline, p-hydroquinone (HQ), p-benzoquinone (BQ), co-oligomers of aniline and p-benzoquinone (CAB) and acid. Then, n-octanol and 2-octanone were selected as extracts to remove HQ, BQ and CAB from the used electrolyte solution. Following that, the recycled electrolyte solution was prepared by adjusting the concentration of aniline and acid of the aqueous phase, and the electrochemical polymerization process was conducted. Finally, the obtained PANI was characterized by scanning electron microscope (SEM) and electrochemical methods. The experimental results clearly demonstrate that the morphology and specific capacitance of PANI produced from the recycled electrolyte solution can be recovered completely. This research paves the way for reusing the used electrolyte solution for aniline electrochemical polymerization.

Copolymers of aniline and 2-aminoterephthalic acid as a novel cathode material for hybrid supercapacitors

A new polyaniline based co-polymer nanorod with excellent electrochemical performance is used as a novel cathod material for hybrid super capacitor.

Electrochemical potential-responsive tetra(aniline) nanocapsules via self-assembly

A new strategy is developed for electrochemical potential-responsive tetra(aniline) vesicles with tunable size via self-assembly.

Ethanol-guided synthesis of (flower-on-leaf)-like aniline oligomers with excellent adsorption properties

A novel oligoaniline with hierarchical flower-on-leaf microstructures and excellent adsorption properties has been fabricated via the oxidation of aniline in EtOH/water (3 : 7, v/v) mixtures.

Controlled synthesis of tower-like aniline oligomers with excellent adsorption properties

Nanoplate-based tower-like oligoaniline as a new nano-architecture was tailored via the oxidation polymerization of aniline in NaOH medium at 35 °C.

In Situ Infrared Spectroscopy of Oligoaniline Intermediates Created under Alkaline Conditions

The progress of the oxidation of aniline with ammonium peroxydisulfate in an alkaline aqueous medium has been monitored in situ by attenuated total reflection (ATR) Fourier transform infrared spectroscopy. The growth of the microspheres and of the film at the ATR crystal surface, as well as the changes proceeding in the surrounding aqueous medium, are reflected in the spectra. The evolution of the spectra and the changes in the molecular structure occurring during aniline oxidation in alkaline medium are discussed with the help of differential spectra. Several processes connected with the various stages of aniline oxidation were distinguished. The progress of hydrolysis of the aniline in water and further an oxidation of aminophenol to benzoquinone imines in the presence of peroxydisulfate in alkaline medium have been detected in the spectra in real time. The precipitated solid oxidation product was analyzed by mass spectrometry. It is composed of oligomers, mainly trimers to octamers, of various molecular structures incorporating in addition to aniline constitutional units also p-benzoquinone or p-benzoquinoneimine moieties.

Detection of aniline oligomers on polyaniline-gold interface using resonance Raman scattering

In situ deposited conducting polyaniline films prepared by the oxidation of aniline with ammonium peroxydisulfate in aqueous media of various acidities on gold and silicon supports were characterized by Raman spectroscopy. Enhanced Raman bands were found in the spectra of polyaniline films produced in the solutions of weak acids or in water on gold surface. These bands were weak for the films prepared in solutions of a strong acid on a gold support. The same bands are present in the Raman spectra of the reaction intermediates deposited during aniline oxidation in water or aqueous solutions of weak or strong acids on silicon removed from the reaction mixture at the beginning of the reaction. Such films are formed by aniline oligomers adsorbed on the surface. They were detected on the polyaniline-gold interface using resonance Raman scattering on the final films deposited on gold. The surface resonance Raman spectroscopy of the monolayer of oligomers found in the bulk polyaniline film makes this method advantageous in surface science, with many applications in electrochemistry, catalysis, and biophysical, polymer, or analytical chemistry.

Towards directional assembly of hierarchical structures: aniline oligomers as the model precursors

Hierarchical architectures attract a large number of scientists and engineers because of their unique physicochemical properties compared with bulk materials and their precursors. It is believed that intermolecular interactions play a key role in the formation of these hierarchical architectures. However, the principle of coordination of various intermolecular interactions in the self-assembly process is not clear. Here, an aniline oligomer is used as a model brick to study the formation process of well-defined hierarchical architectures, and the directional growth mechanism is proposed. It is assumed that aniline oligomer molecules are asymmetric, and driven by intermolecular attractive forces to aggregate in various manners. Combined with the interactions between the aniline oligomer and molecules from the medium, three-dimensional assemblies, flower-like and urchin-like microspheres, can be formed. The variability and complexity of morphologies produced in the process was analyzed according to the intermolecular interactions, which includes hydrogen bonding, π-π stacking, hydrophobic interaction, etc. The applicability of these special hierarchical architectures, such as in the preparation of superhydrophobic surfaces, is also discussed.