Luminescent noble metal nanoclusters as an emerging optical probe for sensor development

Harnessing sustainable nanoclusters for sensitive optical detection of tetracyclines and the underlying mechanism

Simple and rapid sensing methods for the detection of antibiotics in drinks and foods are highly desirable due to the presence of these drugs in food products, as a consequence of extensive abuse of antibiotics in livestock production. In this study, we report a facile synthesis strategy of gold nanoclusters (AuNCs) passivated with N-acetyl-l-cysteine (AuNC@NAC). This nanocluster exhibits a fluorescence emission peak at 700 nm, which gradually decreases at increasing concentrations of antibiotics, such as tetracyclines. The limit of detection (LOD) was determined to be 0.8 ppm with a linear range of 0.1-140 μM (0.04-62 ppm). This method showcased exceptional selectivity in the detection of tetracyclines compared to anions, metallic cations and amino acids. The underlying mechanism has been elucidated, and the fluorescence quenching was found to be a combination of dynamic and static quenching mechanisms, with photoinduced electron transfer (PET) identified as the primary process for dynamic quenching.

pH-dependent Synthesis and Interactions of Fluorescent L-Histidine Capped Copper Nanoclusters with Metal Ions

In this work, L-Histidine-protected copper nanoclusters synthesized by changing the pH levels of precursor solution have been shown to display different emission wavelengths and intensities. As determined by mass spectrometry, nanoclusters Cu3L2 synthesized at acidic pH have 3 atoms in their core and emit in the greenish-yellow region, and nanoclusters Cu2L2, synthesized in the basic conditions have 2 atoms in their core and emit in the blue-green region. They are expected to have coordination through the carboxylate group and nitrogen of the imidazole ring of histidine ligand, respectively. Metal ions Mg2+, Mn2+, Zn2+, and Pb2+ selectively enhance the interaction between carboxylate - copper metal core and increase the emission intensity of Cu3L2. These metal ions weaken the interaction between imidazole nitrogen and copper metal core and quench the emission intensity of Cu2L2. As synthesized, nanoclusters exhibit good water solubility and photostability, they can act as fluorescent probes to sense the metal ions, therefore, they were utilized for the optical sensing of the mentioned metal ions. Fluorescent nanoclusters were found to sense even a very low concentration of metal ions with a limit of detection (3 σ/slope) in nanomolar range.

Polyhedral {Ag12} and {Ag16} Clusters: Synthesis, Structural Characterization and Third-Order Nonlinear Optical Properties

Two polyhedral silver-thiolate clusters, [S@Ag16(Tab)10(MeCN)8](PF6)14 (Ag16) and [Ag12(Tab)6(DMF)12](PF6)12 (Ag12), were synthesized by using electroneutral Tab species as protective ligands (Tab=4-(trimethylammonio)benzenethiolate, DMF=N,N-dimethylformamide, MeCN=acetonitrile). Ag16 has a decahedral shape composed of eight pentagon {Ag5} units and two square {Ag4} units. The structure of Ag12 is a cuboctahedron, a classical Archimedean structure composed of six triangular faces and eight square faces. The former configuration is discovered in silver-thiolate cluster for the first time, possibly benefited from the more flexible coordination between the Tab ligand and Ag+ facilitated by the electropositive -N(CH3)3 + substituent group. Third-order nonlinear optical studies show that both clusters in DMF exhibit reverse saturate absorption response under the irradiation of 532 nm laser.

Photoluminescent Characterization of Metal Nanoclusters: Basic Parameters, Methods, and Applications

Metal nanoclusters (MNCs) can be synthesized with atomically precise structures and molecule formulae due to the rapid development of nanocluster science in recent decades. The ultrasmall size range (normally < 2 nm) endows MNCs with plenty of molecular-like properties, among which photoluminescent properties have aroused extensive attention. Tracing the research and development processes of luminescent nanoclusters, various photoluminescent analysis and characterization methods play a significant role in elucidating luminescent mechanism and analyzing luminescent properties. In this review, it is aimed to systematically summarize the normally used photoluminescent characterizations in MNCs including basic parameters and methods, such as excitation/emission wavelength, quantum yield, and lifetime. For each key parameter, first its definition and meaning is introduced and then the relevant characterization methods including measuring principles and the revelation of luminescent properties from the collected data are discussed. Then, it is discussed in details how to explore the luminescent mechanism of MNCs and construct NC-based applications based on the measured data. By means of these characterization strategies, the luminescent properties of MNCs and NC-based designs can be explained quantitatively and qualitatively. Hence, this review is expected to provide clear guidance for researchers to characterize luminescent MNCs and better understand the luminescent mechanism from the measured results.

The roles of templates consisting of amino acids in the synthesis and application of gold nanoclusters

Gold nanoclusters (AuNCs) with low toxicity, high photostability, and facile synthesis have attracted great attention. The ligand is of great significance in stabilizing AuNCs and regulating their properties. Ligands consisting of amino acids (proteins and peptides) are an ideal template for synthesizing applicative AuNCs due to their inherent bioactivity, biocompatibility, and accessibility. In this review, we summarize the correlation of the template consisting of amino acids with the properties of AuNCs by analyzing different peptide sequences. The selection of amino acids can regulate the fluorescence excitation/emission and intensity, size, cell uptake, and light absorption. By analyzing the role played by AuNCs stabilized by proteins and peptides in the application, universal rules and detailed performances of sensors, antibacterial agents, therapeutic reagents, and light absorbers are reviewed. This review can guide the template design and application of AuNCs when selecting proteins and peptides as ligands.

Fluorinated Hafnium and Zirconium Coenable the Tunable Biodegradability of Core-Multishell Heterogeneous Nanocrystals for Bioimaging

Upconversion (UC)/downconversion (DC)-luminescent lanthanide-doped nanocrystals (LDNCs) with near-infrared (NIR, 650-1700 nm) excitation have been gaining increasing popularity in bioimaging. However, conventional NIR-excited LDNCs cannot be degraded and eliminated eventually in vivo owing to intrinsic "rigid" lattices, thus constraining clinical applications. A biodegradability-tunable heterogeneous core-shell-shell luminescent LDNC of Na3HfF7:Yb,Er@Na3ZrF7:Yb,Er@CaF2:Yb,Zr (abbreviated as HZC) was developed and modified with oxidized sodium alginate (OSA) for multimode bioimaging. The dynamic "soft" lattice-Na3Hf(Zr)F7 host and the varying Zr4+ doping content in the outmoster CaF2 shell endowed HZC with tunable degradability. Through elaborated core-shell-shell coating, Yb3+/Er3+-coupled UC red and green and DC second near-infrared (NIR-II) emissions were, respectively, enhanced by 31.23-, 150.60-, and 19.42-fold when compared with core nanocrystals. HZC generated computed tomography (CT) imaging contrast effects, thus enabling NIR-II/CT/UC trimodal imaging. OSA modification not only ensured the exemplary biocompatibility of HZC but also enabled tumor-specific diagnosis. The findings would benefit the clinical imaging translation of LDNCs.

Al8 Cluster-Based Metal Halide Frameworks: Balancing Singlet-Triplet Excited States to Achieve White Light and Multicolor Luminescence

Luminescent metal clusters have attracted great interest in current research; however, the design synthesis of Al clusters with color-tunable luminescence remains challenging. Herein, an [Al8 (OH)8 (NA)16 ] (Al8 , HNA = nicotinic acid) molecular cluster with dual luminescence properties of fluorescence and room-temperature phosphorescence (RTP) is synthesized by choosing HNA ligand as phosphor. Its prompt photoluminescence (PL) spectrum exhibits approximately white light emission at room temperature. Considering that halogen atoms can be used to regulate the RTP property by balancing the singlet and triplet excitons, different CdX2 (X- = Cl- , Br- , I- ) are introduced into the reactive system of the Al8 cluster, and three new Al8 cluster-based metal-organic frameworks, {[Al8 Cd3 Cl5 (OH)8 (NA)17 H2 O]·2HNA}n (CdCl2 -Al8 ), {[Al8 Cd4 Br7 (OH)8 (NA)16 CH3 CN]·NA·HNA}n (CdBr2 -Al8 ) and {[Al8 Cd8 I16 (OH)8 (NA)16 ]}n (CdI2 -Al8 ) are successfully obtained. They realize the color tunability from blue to yellow at room temperature. The origination of fluorescence and phosphorescence has also been illustrated by structure-property analysis and theoretical calculation. This work provides new insights into the design of multicolor luminescent metal cluster-based materials and develops advanced photo-functional materials for multicolor display, anti-counterfeiting, and encryption applications.

Preparation of chitosan/SiO2 coated silver nanoclusters and its application in enhanced fluorescence detection of berberine hydrochloride

Although the synthesis and applications of the metal nanoclusters and silica coated metal noclusters were widely explored, however, the fluorescence sensing application of silica coated metal nanoclusters are still challenges. In this work, the composite nanoparticles (PEI-Ag NCs/CSNPs) were synthesized by coating polyethyleneimine capped silver nanoclusters (PEI-Ag NCs) with chitosan/silica through a reverse microemulsion method, and then used for fluorescence enhancement detection of berberine hydrochloride (BRH). UV-vis absorption spectra, fluorescence spectra, IR spectra, transmission electron microscope (TEM) and X-ray Photoelectron Spectroscopy (XPS) technique were used to reveal the possible binding relationship between PEI-AgNCs and chitosan/silica and fluorescence sensing mechanism of PEI-Ag NCs/CSNPs to BRH. The results showed that PEI-Ag NCs/CSNPs possess better sensing ability as compared to the free PEI- Ag NCs and can be successfully applied to evaluate the BRH content in actual medicine.

Towards Green Synthesis of Fluorescent Metal Nanoclusters

In the modern development of nanoscience and nanotechnology, metal nanoclusters have emerged as a foremost category of nanomaterials exhibiting remarkable biocompatibility and photo-stability having dramatically distinctive optical, electronic, and chemical properties. This review focuses on synthesizing fluorescent metal nanoclusters in a greener way to make them suitable for biological imaging and drug delivery application. The green methodology is the desired route for sustainable chemical production and should be utilized for any form of chemical synthesis including nanomaterials. It aims to eliminate harmful waste, uses non-toxic solvents, and employs energy-efficient processes for the synthesis. This article provides an overview of conventional synthesis methods, including stabilizing nanoclusters by small organic molecules in organic solvents. Then we focus on the improvement of properties, applications of green synthesized metal nanoclusters, challenges involved, and further advancement required in the direction of green synthesis of MNCs. There are plenty of problems for scientists to solve to make nanoclusters suitable for bio-applications, chemical sensing, and catalysis synthesized by green methods. Using bio-compatible and electron-rich ligands, understanding ligand-metal interfacial interactions, employing more energy-efficient processes, and utilizing bio-inspired templates for synthesis are some immediate problems worth solving in this field that requires continued efforts and interdisciplinary knowledge and collaboration.

Synthesis of Greenish-Yellow Fluorescent Copper Nanocluster for the Selective and Sensitive Detection of Fipronil Pesticide in Vegetables and Grain Samples

In this paper, a new synthetic route is introduced for the synthesis of high-luminescent greenish-yellow fluorescent copper nanoclusters (PVP@A. senna-Cu NCs) using Avaram senna (A. senna) and polyvinylpyrrolidone (PVP) as templates. A. senna plant extract mainly contains variety of phytochemicals including glycosides, sugars, saponins, phenols, and terpenoids that show good pharmacological activities such as anti-inflammatory, antioxidant, and antidiabetic. PVP is a stable and biocompatible polymer that is used as a stabilizing agent for the synthesis of PVP@A. senna-Cu NCs. The size, surface functionality, and element composition of the fabricated Cu NCs were confirmed by various analytical techniques. The as-prepared greenish-yellow fluorescent Cu NCs exhibit significant selectivity towards fipronil, thereby favoring to assay fipronil pesticide with good linearity in the range of 3.0-30 μM with a detection limit of 65.19 nM. More importantly, PVP@A. senna-Cu NCs are successfully applied to assay fipronil in vegetable and grain samples.

Recent developments in the investigation of driving forces for transforming coinage metal nanoclusters

Metal nanoclusters serve as an emerging class of modular nanomaterials. The transformation of metal nanoclusters has been fully reflected in their studies from every aspect, including the structural evolution analysis, physicochemical property regulation, and practical application promotion. In this review, we highlight the driving forces for transforming atomically precise metal nanoclusters and summarize the related transforming principles and fundamentals. Several driving forces for transforming nanoclusters are meticulously reviewed herein: ligand-exchange-induced transformations, metal-exchange-induced transformations, intercluster reactions, photochemical transformations, oxidation/reduction-induced transformations, and other factors (intrinsic instability, pH, temperature, and metal salts) triggering transformations. The exploitation of transforming principles to customize the preparations, structures, physicochemical properties, and practical applications of metal nanoclusters is also disclosed. At the end of this review, we provide our perspectives and highlight the challenges remaining for future research on the transformation of metal nanoclusters. Our intended audience is the broader scientific community interested in metal nanoclusters, and we believe that this review will provide researchers with a comprehensive synthetic toolbox and insights on the research fundamentals needed to realize more cluster-based nanomaterials with customized compositions, structures, and properties.

Tracking tumor heterogeneity and progression with near-infrared II fluorophores

Heterogeneous cells are the main feature of tumors with unique genetic and phenotypic characteristics, which can stimulate differentially the progression, metastasis, and drug resistance. Importantly, heterogeneity is pervasive in human malignant tumors, and identification of the degree of tumor heterogeneity in individual tumors and progression is a critical task for tumor treatment. However, current medical tests cannot meet these needs; in particular, the need for noninvasive visualization of single-cell heterogeneity. Near-infrared II (NIR-II, 1000-1700 nm) imaging exhibits an exciting prospect for non-invasive monitoring due to the high temporal-spatial resolution. More importantly, NIR-II imaging displays more extended tissue penetration depths and reduced tissue backgrounds because of the significantly lower photon scattering and tissue autofluorescence than traditional the near-infrared I (NIR-I) imaging. In this review, we summarize systematically the advances made in NIR-II in tumor imaging, especially in the detection of tumor heterogeneity and progression as well as in tumor treatment. As a non-invasive visual inspection modality, NIR-II imaging shows promising prospects for understanding the differences in tumor heterogeneity and progression and is envisioned to have the potential to be used clinically.

Gold nanoclusters Cys-Au NCs as selective fluorescent probes for "on-off-on" detection of Fe3+ and ascorbic acid

Gold nanoclusters exhibit attractive properties owing to their excellent biocompatibility and strong photostability in the biomedical domain. In this research, cysteine-protected fluorescent gold nanoclusters (Cys-Au NCs) were synthesized via decomposing Au(i)-thiolate complexes for the detection of Fe3+ and ascorbic acid in a bidirectional "on-off-on" mode. Meanwhile, the detailed characterization confirmed that the mean particle size of the prepared fluorescent probe was 2.43 nm and showed a fluorescence quantum yield of 3.31%. In addition, our results indicate that the fluorescence probe for ferric ions exhibited a broad detection scope ranging from 0.1 to 2000 μM and excellent selectivity. The as-prepared Cys-Au NCs/Fe3+ was demonstrated to be an ultrasensitive and selective nanoprobe for the detection of ascorbic acid. This study indicated that the "on-off-on" fluorescent probes Cys-Au NCs held a promising application for the bidirectional detection of Fe3+ and ascorbic acid. Furthermore, our novel "on-off-on" fluorescent probes provided insight into the rational design of thiolate-protected gold nanoclusters for biochemical analysis of high selectivity and sensitivity.

BSA Capped gold Nanoclusters Modulated by Copper ion for Sensitive and Selective Detection of Histidine in Biological Fluid

This research proposed a sample and environmentally sustainable technique for the synthesis of bovine serum albumin capped gold nanoclusters (BSA-AuNCs) with outstanding fluorescence. The synthesized BSA-AuNCs were investigated using various ways before being combined with Cu2+ to produce a fluorescent switch probe (BSA-AuNCs-Cu2+) for histidine determination. After adding Cu2+, the fluorescence of the BSA-AuNCs was quenched, the fluorescence intensity was enhanced after adding histidine due to good coordination between Cu2+ and histidine. The significant chelation of histidine with Cu2+ demonstrated the viability of developing a selective "switch on" probe for histidine detecting over other amino acids. Unlike existing fluorescent nanomaterial-based approaches for detecting histidine, this study promises good selectivity, high efficiency, and the avoiding of chemical solvents. The designed BSA-AuNCs-Cu2+ fluorescent probe demonstrated an acceptable linear detection range of 0 to 240 µM under optimum circumstances, with a detection limit of 0.9 µM. The BSA-AuNCs-Cu2+ system was investigated in rat serum and human urine, with recoveries ranging from 97.2 to 108.2%, demonstrating its potential applicability for histidine detection with favorable results.

Ligand effects on the photoluminescence of atomically precise silver nanoclusters

Photoluminescence (PL) is one of the most exciting properties of atomically precise metal nanoclusters (NCs), making them a prime choice for various applications, from sensing to bio-imaging. While there are several advantages of metal NCs for PL-based applications, their PLQY is significantly low compared to other PL-active nanomaterials or organic dyes. It is essential to understand the PL mechanism in detail to tune the PLQY of NCs. There are numerous reports on gold NCs with a known structure where the origin of PL has been explored, and it was found that ligands play a vital role in their PL properties along with the kernel (core). Reports on understanding the ligand effects on PL properties are also evolving for the case of atomically precise silver NCs. This mini-review will summarize the ligands' role in PL of 29 atom Ag NCs, the most reported NCs with diversity in the silver family. The ligands were classified as primary and secondary, and their effects on tuning the PL properties were explained. The review will also address some of the answers to open questions for AgNCs, such as the origin of PL, dynamics, and the tunability of PLQY using ligand modifications.

A novel fluorescent sensor array to identify Baijiu based on the single gold nanocluster probe

Baijiu occupies a vital position in Chinese food and China's market. Strict evaluation of Baijiu is highly demanded. In this study, we constructed a novel fluorescent sensor array based on the single glutathione-protected gold nanoclusters (AuNCs) probe for the detection of organic acids and Baijiu. The fluorescence of AuNCs was simply modulated by three metal ions (Cu²⁺, Mn²⁺, and Ag⁺), and formed new complexes as sensing elements. These four sensing elements responded variously to nine organic acids, and further chemometric analysis results allowed for the classification and quantification of acids. Moreover, the sensor array successfully identified 21 Baijiu samples of different brands among 11 aroma types. It could also distinguish Baijiu of different qualities as well as pure Baijiu from its adulterations and showed high selectivity among multiple interfering drinks. The results demonstrated that the AuNCs-based sensor array has considerable potential for quality monitoring of Baijiu.

Engineering Coinage Metal Nanoclusters for Electroluminescent Light-Emitting Diodes

Coinage metal nanoclusters (MNCs) are a new type of ultra-small nanoparticles on the sub-nanometer (typically < three nm) scale intermediate between atoms and plasmonic nanoparticles. At the same time, the ultra-small size and discrete energy levels of MNCs enable them to exhibit molecular-like energy gaps, and the total structure involving the metal core and surface ligand together leads to their unique properties. As a novel environmentally friendly chromophore, MNCs are promising candidates for the construction of electroluminescent light-emitting diodes (LEDs). However, a systematic summary is urgently needed to correlate the properties of MNCs with their influences on electroluminescent LED applications, describe the synthetic strategies of highly luminescent MNCs for LEDs’ construction, and discuss the general influencing factors of MNC-based electroluminescent LEDs. In this review, we first discuss relevant photoemissions of MNCs that may have major influences on the performance of MNC-based electroluminescent LEDs, and then demonstrate the main synthetic strategies of highly luminescent MNCs. To this end, we illustrate the recent development of electroluminescent LEDs based on MNCs and present our perspectives on the opportunities and challenges, which may shed light on the design of MNC-based electroluminescent LEDs in the near future.

Label-Free Fluorescence Sensing Strategy Based on Functional Nucleic Acids via Energy Transfer between DNA-Templated Silver Nanoclusters and Gold Nanorods

A simple and low-cost fluorescence signal-on sensing strategy has been developed based on functional nucleic acids (FNAs) via energy transfer between DNA-templated silver nanoclusters (DNA-AgNCs) and gold nanorods (GNRs). FNAs were used as highly selective recognition probes, in which an aptamer was used to detect small molecules represented by tetracycline, and DNAzyme was used to detect heavy metal ions represented by Pb²⁺. The fluorescent DNA-AgNCs were synthesized by the designed oligonucleotide sequences, which consisted of three parts: AgNCs synthesis template C₆G₅C₆, spacer T₅, and complementary sequences of the aptamer or enzyme strand. The difference in electrostatic interactions between ss/dsDNA and positively charged GNRs leads to energy transfer with different efficiencies. The analytes represented by tetracycline and Pb²⁺ can destroy the dsDNA structure and reduce the energy-transfer efficiency between DNA-AgNCs and GNRs, thus achieving fluorescence recovery and a signal-on analytical strategy. This strategy has excellent specificity and sensitivity with limit of detections of 4.411 nM for tetracycline and 1.416 nM for Pb²⁺ and has been successfully applied to detect tetracycline in milk and Pb²⁺ in river water. Using DNA-AgNCs formed in situ as signal probes, this strategy does not require labels or modifications and can be completed without complex analytical instruments. Moreover, this strategy can be extended to detect other targets by replacing FNA sequences. Therefore, it has promising prospects in the sensitive, simple, and rapid detection of contaminants in food and environment samples.

An Overview on Coinage Metal Nanocluster-Based Luminescent Biosensors via Etching Chemistry

The findings from the synthetic mechanism of metal nanoclusters yield the etching chemistry based on coinage metal nanoclusters. The utilization of such chemistry as a tool that can alter the optical properties of metal nanoclusters has inspired the development of a series of emerging luminescent biosensors. Compared with other sensors, the luminescent biosensors have the advantages of being more sensitive, saving time and saving cost. We reviewed topics on the luminescent sensors based on the etching of emissive coinage metal nanoclusters. The molecules possessing varied etching ability towards metal nanoclusters were categorized with discussions of corresponding etching mechanisms. The understanding of etching mechanisms favored the discussions of how to use etching methods to detecting biochemical molecules. The emerging luminescent biosensors via etching chemistry also provided challenges and new opportunities for analytical chemistry and sensors.

Facile construction of highly luminescent and biocompatible gold nanoclusters by shell rigidification for two-photon pH-edited cytoplasmic and in vivo imaging

Gold nanoclusters (AuNCs), as a novel fluorescent material, have been extensively explored and developed for bioimaging because of their attractive advantages such as ultrasmall size, low toxicity and exceptional two-photon excitation properties. However, it still remains a challenge to produce water-soluble, biocompatible and ultrabright AuNCs. Herein, we report on a novel one-pot synthesis of highly luminescent and biocompatible AuNCs by using polyvinyl pyrrolidone (PVP), a water-soluble polymer, to rigidify the primary stabilizing layer (shell) that is composed of 6-aza-2-thiothymine (ATT) ligands bound to the particle. Such shell-rigidification resulted in a significant enhancement of the fluorescence efficiency, reaching a quantum yield of 39% under the best conditions, about 35-fold increase from the intrinsically weak fluorescence of the AuNCs stabilized by only ATT. The fluorescence enhancement mechanism was systematically characterized, and the results indicate that PVP coating rigidifies the ATT ligand shell through steric hindrance and reduces the nonradiative relaxation of the excited states. The biocompatible PVP-AuNCs were further examined for two-photon cellular and sentinel lymph node (SLN) bioimaging, and we observed pH-dependent cytoplasmic images and intense green fluorescence in SLN and lymphatic vessels.

Emerging Strategies in Enhancing Singlet Oxygen Generation of Nano-Photosensitizers Toward Advanced Phototherapy

The great promise of photodynamic therapy (PDT) has thrusted the rapid progress of developing highly effective photosensitizers (PS) in killing cancerous cells and bacteria. To mitigate the intrinsic limitations of the classical molecular photosensitizers, researchers have been looking into designing new generation of nanomaterial-based photosensitizers (nano-photosensitizers) with better photostability and higher singlet oxygen generation (SOG) efficiency, and ways of enhancing the performance of existing photosensitizers. In this paper, we review the recent development of nano-photosensitizers and nanoplasmonic strategies to enhance the SOG efficiency for better PDT performance. Firstly, we explain the mechanism of reactive oxygen species generation by classical photosensitizers, followed by a brief discussion on the commercially available photosensitizers and their limitations in PDT. We then introduce three types of new generation nano-photosensitizers that can effectively produce singlet oxygen molecules under visible light illumination, i.e., aggregation-induced emission nanodots, metal nanoclusters (< 2 nm), and carbon dots. Different design approaches to synthesize these nano-photosensitizers were also discussed. To further enhance the SOG rate of nano-photosensitizers, plasmonic strategies on using different types of metal nanoparticles in both colloidal and planar metal-PS systems are reviewed. The key parameters that determine the metal-enhanced SOG (ME-SOG) efficiency and their underlined enhancement mechanism are discussed. Lastly, we highlight the future prospects of these nanoengineering strategies, and discuss how the future development in nanobiotechnology and theoretical simulation could accelerate the design of new photosensitizers and ME-SOG systems for highly effective image-guided photodynamic therapy.

A novel polypeptide-modified fluorescent gold nanoclusters for copper ion detection

Biomolecule-functionalized fluorescent gold nanocluster (AuNCs) have attracted a lot of attention due to good biocompatibility, stable physicochemical properties and considerable cost advantages. Inappropriate concentration of Cu²⁺ may cause a variety of diseases. In this study, AuNCs were synthesized in alkaline aqueous solution using bovine serum albumin (BSA) as a template. And then, the peptide CCYWDAHRDY was coupled to AuNCs. Furthermore, the fluorescence of synthesized CCYWDAHRDY-AuNCs response to Cu²⁺ was evaluated. As the results shown that the CCYWDAHRDY-AuNCs can sensitively detect Cu²⁺. After adding Cu²⁺ to the probe system, the fluorescence of the CCYWDAHRDY-AuNCs was quenched. The detection conditions were at pH 6 and 30 °C for 10 min, the linear relationship between Cu²⁺ concentration and fluorescence intensity were good in the range of 0.1 ~ 4.2 μmol/L. The regression equation was y = − 105.9x + 693.68, the linear correlation coefficient is 0.997, and the minimum detection limit was 52 nmol/L.

Surfactant-free synthesis of fluorescent platinum nanoclusters using HEPES buffer for hypochlorous acid sensing and imaging

A surfactant-free synthesis of noble-metal nanoclusters (NMNCs) with specific function has recently remained more attractive and superior in bio-applications. Herein, by employing the weak reducibility of non-toxic HEPES, we prepared novel water-soluble fluorescent HEPES@Pt NCs by a simple surfactant-free synthesis strategy for hypochlorous acid (HClO) sensing. The as-prepared Pt NCs featured ultra-small size (∼2 nm), bright blue fluorescence, high stability and biocompatibility, and the fluorescence of the Pt NC nanoprobe can be specifically quenched with hypochlorous acid by a static quenching process. Moreover, the surfactant-free Pt NC probe displays fascinating performances for HClO sensing, including fast response to HClO, high stability and specificity, and is further applied for imaging the fluctuations of the HClO concentration in living cells with satisfactory results for the first time. Thereby, we anticipate that it is a reliable and attractive approach to develop versatile NMNCs through the surfactant-free synthesis for further applications in biological research.

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

Effects of protecting groups on luminescent metal nanoclusters: spectroscopic signatures and applications

Luminescent metal nanoclusters (NCs) have been established as next-generation fluorophores. Their biocompatible and non-toxic nature, along with excellent chemical- and photo-stability, enables them to find applications in multi-disciplinary areas. However, preparing NCs which are stable is always challenging, primarily owing to their small size and propensity to self-aggregate. In this review, we highlight a holistic approach as to how ligands and templates can monitor the stability of NCs, tune their spectroscopic signatures, and alter their applications. The role of small molecules of a large ligand in the preparation of NCs and their associated limitations are also discussed. We have summarized how these NCs can be utilized in sensing several metal ions, pH, viscosity and temperature of many systems which have biological relevance. Additionally, these luminescent metal NCs find usage in cell-imaging, discriminating between cancerous and non-cancerous cell lines and also targeting specific organelles within the cellular environment.

Water-Dispersible Gold Nanoclusters: Synthesis Strategies, Optical Properties, and Biological Applications

Atomically precise gold nanoclusters (AuNCs) are an emerging class of quantum-sized nanomaterials. Intrinsic discrete electronic energy levels have endowed them with fascinating electronic and optical properties. They have been widely applied in the fields of optoelectronics, photovoltaics, catalysis, biochemical sensing, bio-imaging, and therapeutics. Nevertheless, most AuNCs are synthesized in organic solvents and do not disperse in aqueous solutions; this restricts their biological applications. In this review, we focus on the recent progress in the preparation of water-dispersible AuNCs and their biological applications. We first review different methods of synthesis, including direct synthesis from hydrophilic templates and indirect phase transfer of hydrophobic AuNCs. We then discuss their photophysical properties, such as emission enhancement and fluorescence lifetimes. Next, we summarize their latest applications in the fields of biosensing, biolabeling, and bioimaging. Finally, we outline the challenges and potential for the future development of these AuNCs.

Ligand Effects on Intramolecular Configuration, Intermolecular Packing, and Optical Properties of Metal Nanoclusters

Surface modification has served as an efficient approach to dictate nanocluster structures and properties. In this work, based on an Ag22 nanocluster template, the effects of surface modification on intracluster constructions and intercluster packing modes, as well as the properties of nanoclusters or cluster-based crystallographic assemblies have been investigated. On the molecular level, the Ag22 nanocluster with larger surface steric hindrance was inclined to absorb more small-steric chlorine but less bulky thiol ligands on its surface. On the supramolecular level, the regulation of intramolecular and intermolecular interactions in nanocluster crystallographic assemblies rendered them CIEE (crystallization-induced emission enhancement)-active or -inactive nanomaterials. This study has some innovation in the molecular and intramolecular tailoring of metal nanoclusters, which is significant for the preparation of new cluster-based nanomaterials with customized structures and enhanced performances.

Application of Nanotechnology in Analysis and Removal of Heavy Metals in Food and Water Resources

Toxic heavy metal contamination in food and water from environmental pollution is a significant public health issue. Heavy metals do not biodegrade easily yet can be enriched hundreds of times by biological magnification, where toxic substances move up the food chain and eventually enter the human body. Nanotechnology as an emerging field has provided significant improvement in heavy metal analysis and removal from complex matrices. Various techniques have been adapted based on nanomaterials for heavy metal analysis, such as electrochemical, colorimetric, fluorescent, and biosensing technology. Multiple categories of nanomaterials have been utilized for heavy metal removal, such as metal oxide nanoparticles, magnetic nanoparticles, graphene and derivatives, and carbon nanotubes. Nanotechnology-based heavy metal analysis and removal from food and water resources has the advantages of wide linear range, low detection and quantification limits, high sensitivity, and good selectivity. There is a need for easy and safe field application of nanomaterial-based approaches.

Self-Assembly of Precision Noble Metal Nanoclusters: Hierarchical Structural Complexity, Colloidal Superstructures, and Applications

Ligand protected noble metal nanoparticles are excellent building blocks for colloidal self-assembly. Metal nanoparticle self-assembly offers routes for a wide range of multifunctional nanomaterials with enhanced optoelectronic properties. The emergence of atomically precise monolayer thiol-protected noble metal nanoclusters has overcome numerous challenges such as uncontrolled aggregation, polydispersity, and directionalities faced in plasmonic nanoparticle self-assemblies. Because of their well-defined molecular compositions, enhanced stability, and diverse surface functionalities, nanoclusters offer an excellent platform for developing colloidal superstructures via the self-assembly driven by surface ligands and metal cores. More importantly, recent reports have also revealed the hierarchical structural complexity of several nanoclusters. In this review, the formulation and periodic self-assembly of different noble metal nanoclusters are focused upon. Further, self-assembly induced amplification of physicochemical properties, and their potential applications in molecular recognition, sensing, gas storage, device fabrication, bioimaging, therapeutics, and catalysis are discussed. The topics covered in this review are extensively associated with state-of-the-art achievements in the field of precision noble metal nanoclusters.

Ligand Design in Ligand-Protected Gold Nanoclusters

The design of surface ligands is crucial for ligand-protected gold nanoclusters (Au NCs). Besides providing good protection for Au NCs, the surface ligands also play the following two important roles: i) as the outermost layer of Au NCs, the ligands will directly interact with the exterior environment (e.g., solvents, molecules and cells) influencing Au NCs in various applications; and ii) the interfacial chemistry between ligands and gold atoms can determine the structures, as well as the physical and chemical properties of Au NCs. A delicate ligand design in Au NCs (or other metal NCs) needs to consider the covalent bonds between ligands and gold atoms (e.g., gold-sulfur (Au-S) and gold-phosphorus (Au-P) bond), the physics forces between ligands (e.g., hydrophobic and van der Waals forces), and the ionic forces between the functional groups of ligands (e.g., carboxylic (COOH) and amine group (NH₂ )); which form the underlying chemistry and discussion focus of this review article. Here, detailed discussions on the effects of surface ligands (e.g., thiolate, phosphine, and alkynyl ligands; or hydrophobic and hydrophilic ligands) on the synthesis, structures, and properties of Au NCs; highlighting the design principles in the surface engineering of Au NCs for diverse emerging applications, are provided.

A new method for cartap detection with high sensitivity and selectivity based on the inner filter effect between GSH-Cu NCs and Au NPs

Herein, a novel and sensitive fluorescence method for cartap determination is established on the basis of the inner filter effect (IFE) of gold nanoparticles (Au NPs) on the fluorescence of glutathione protected Cu NCs (GSH-Cu NCs). In the presence of Au NPs, the fluorescence of GSH-Cu NCs was strongly quenched by the IFE because the absorption spectra of Au NPs overlap well with the emission spectra of GSH-Cu NCs. Upon addition of cartap, cartap could induce the aggregation of Au NPs whose absorption spectrum does not overlap with the emission spectrum of GSH-Cu NCs. Then, with the increase in cartap concentration, the IFE-decreased fluorescence was gradually recovered, realizing the fluorescence sensing of cartap. Under optimal conditions, the proposed method has a good linear relationship with cartap concentration in the range of 7-100 nM, and the detection limit is 3.34 nM. In addition, satisfactory results were obtained for cartap analysis using tap water and cabbage as real samples, which demonstrated that the method as-developed would have great practical application prospects.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

A new strategy to construct gold nanocluster-based optical probes using luminescence resonance energy transfer

Monolayer-protected metal nanoclusters (MPCs) are emerging as intriguing luminescent materials, but the construction of MPC-based optical probes is still scarce because of both the limited photoluminescence efficiency of MPCs and the lack of recognition mechanism. We herein propose a luminescence resonance energy transfer-based strategy to circumvent these problems.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Nanotheranostic Application of Fluorescent Protein-Gold Nanocluster Hybrid Materials: A Mini-review

The gold nanoclusters (Au NCs) are a special kind of gold nanomaterial containing several gold atoms. Because of their small size and large surface area, Au NCs possess macroscopic quantum tunneling and dielectric domain effects. Furthermore, Au NCs fluorescent materials have longer luminous time and better photobleaching resistance compared with other fluorescent materials. The synthetic process of traditional Au NCs is complicated. Traditional Au NCs are prepared mainly by using polyamide amine type dendrites, and sixteen alkyl trimethylamine bromide or sulfhydryl small molecule as stabilizers. They are consequently synthesized by the reduction of strong reducing agents such as sodium borohydride. Notably, these materials are toxic and environmental-unfriendly. Therefore, there is an urgent need to develop more effective methods for synthesizing Au NCs via a green approach. On the other hand, the self-assembly of protein gold cluster-based materials, and their biomedical applications have become research hotspots in this field. We have been working on the synthesis, assembly and application of protein conjugated gold clusters for a long time. In this review, the synthesis and assembly of protein-gold nanoclusters and their usage in cell imaging and other medical research are discussed.

Single gold nanocluster probe-based fluorescent sensor array for heavy metal ion discrimination

There is a continuing high demand to design effective sensors for the determination of heavy metal ions (HMIs) since they are hazardous to both human health and the environment. In this study, we reported a facile fluorescent sensor array for rapid discrimination of HMIs based on a single gold nanocluster (AuNC) probe. This AuNC probe was prepared by using 2-mercapto-1-methylimidazole (MMI) as a ligand and polyvinypyrrolidone (PVP) as a dispersing agent. The fluorescence emission of PVP/MMI-AuNC was observed to be closely related to the pH value of the aqueous solution, which displays yellow (λ_max = 512 nm) and red (λ_max = 700 nm) fluorescence at pH 12.0 and 6.0, respectively. Further experiments indicated that different HMIs can produce differential effects on the photoluminescence of PVP/MMI-AuNC and thus generate distinct fluorescent responses at 512 and 700 nm. On the basis of this phenomenon, a fluorescent sensor array based on the PVP/MMI-AuNC was then built by simply changing pH value in the sensor element. A total of seven HMIs had their unique response patterns and were successfully distinguished by hierarchical cluster analysis and linear discriminant analysis both in buffer solution and spiked water samples, achieving 100% identification accuracy. This study provides a simple and powerful fingerprinting sensing platform for multiple HMIs, showing broad application prospects in the field of environmental monitoring.

Light-Emitting Atomically Precise Nanocluster-Based Flexible QR Codes for Anticounterfeiting

Despite tremendous progress in the field of fluorescence-based anticounterfeiting, the advanced anticounterfeiting techniques are still posing challenges all over the world due to their cost and reliability. Recently, light-emitting atomically precise nanoclusters have emerged as attractive building blocks because of their well-defined structure, function, and stable photoluminescence. Herein, we report the room temperature fabrication of a stable, flexible, nontoxic, and low-cost precision nanocluster-based luminescent ink for the stencil printing of an optically unclonable security label. Nanocluster-based printing ink shows brilliant photoluminescence owing to its extended C-H···π/π···π interactions. Spectroscopic and microscopic investigations show that intercalated nanoclusters in the printed security labels are highly stable as their optical features and molecular compositions are unaffected. The exceptional mechanical, thermal, photo, and aqueous stabilities of the printed security labels endorse to demonstrate the printing and smartphone-based electronic reading of the quick response code on a currency. Finally, confidential information protection and decryption under a precise window of light have been achieved by adopting the optical contrast illusion. The overall cost of the security label is found to be approximately 0.013 USD per stamp.