Superhydrogels of Nanotubes Capable of Capturing Heavy-Metal Ions

Design of oleic acid/alkyl glycoside composite vesicles as cosmetics carrier: stability, skin permeability and antioxidant activity

Biocompatible fatty acids are natural biological materials which exhibit widespread biomedical applications. Nevertheless, their application in vesicle forms is hampered by strong pH sensitivity and poor stability to changes in ionic strength, temperature, and storage. In the investigation, the incorporation of alkyl glycoside (APG), a surfactant with non-ionic properties, into the oleic acid (OA) vesicles was undertaken as a means to address this issue. The newly formed OA/APG composite vesicles form in a pH range of between 5.4 and 7.4, which is close to the pH range of the physiological environment. The stability studies results showed that the OA/APG composite vesicles have excellent stability in terms of ionic strengths, temperature and storage. The formation of NAR-loaded OA/APG composite vesicles was demonstrated through FT-IR, DSC and XRD. In vitro topical delivery and skin retention studies confirmed that the composite vesicles improve skin permeation rate and have better skin permeation behavior. Antioxidant activity experiments confirmed that the antioxidant effect composite vesicles were significantly increased as compared to the naringenin (NAR). This finding has theoretical implications for the use of drug-loaded fatty acid vesicles in cosmetics industries and topical delivery systems.

Mitigating Ion Migration with an Ultrathin Self-Assembled Ionic Insulating Layer Affords Efficient and Stable Wide-Bandgap Inverted Perovskite Solar Cells

Wide-bandgap perovskite solar cells (PSCs) are attracting increasing attention because they play an irreplaceable role in tandem solar cells. Nevertheless, wide-bandgap PSCs suffer large open-circuit voltage (VOC ) loss and instability due to photoinduced halide segregation, significantly limiting their application. Herein, a bile salt (sodium glycochenodeoxycholate, GCDC, a natural product), is used to construct an ultrathin self-assembled ionic insulating layer firmly coating the perovskite film, which suppresses halide phase separation, reduces VOC loss, and improves device stability. As a result, 1.68 eV wide-bandgap devices with an inverted structure deliver a VOC of 1.20 V with an efficiency of 20.38%. The unencapsulated GCDC-treated devices are considerably more stable than the control devices, retaining 92% of their initial efficiency after 1392 h storage under ambient conditions and retaining 93% after heating at 65 °C for 1128 h in an N2 atmosphere. This strategy of mitigating ion migration via anchoring a nonconductive layer provides a simple approach to achieving efficient and stable wide-bandgap PSCs.

Molecular Bridge on Buried Interface for Efficient and Stable Perovskite Solar Cells

The interface of perovskite solar cells (PSCs) is significantly important for charge transfer and device stability, while the buried interface with the impact on perovskite film growth has been paid less attention. Herein, we use a molecular modifier, glycocyamine (GDA) to build a molecular bridge on the buried interface of SnO2 /perovskite, resulting in superior interfacial contact. This is achieved through the strongly interaction between GDA and SnO2 , which also appreciably modulates the energy level. Moreover, GDA can regulate the perovskite crystal growth, yielding perovskite film with enlarged grain size and absence of pinholes, exhibiting substantially reduced defect density. Consequently, PSCs with GDA modification demonstrate significant improvement of open circuit voltage (close to 1.2 V) and fill factor, leading to an improved power conversion efficiency from 22.60 % to 24.70 %. Additionally, stabilities of GDA devices under maximum power point and 85 °C heat both perform better than the control devices.

Multistimuli-Responsive and Antifreeze Aggregation-Induced Emission-Active Gels Based on CuNCs

Multistimuli-responsive fluorescent gelsbased small molecular gelator by supramolecular assembly, possessing excellent dynamic and reversible characteristic, have caused much concern. In this article, aggregation-induced emission-active fluorescence gels (AIE-gels) with chirality were developed by combining Cu nanoclusters (CuNCs) and natural amino acids, l-tryptophan (l-Trp) or d-Tryptophan (d-Trp). In DMSO/H₂O mixed solvents, CuNCs can self-assemble to form intertwined fibersbased nanoparticles with numerous pores by introducing Zn²⁺. Fibers as second networks of heteronetwork structures are characterized with the participation of l-Trp or d-Trp for cross-linking to reinforce mechanical strength and chiral regulation of gel networks. Aggregation-induced emission enhancement (AIEE) of CuNCs endows the gels with excellent fluorescent properties by introducing solvents and gelation process. The fluorescent gels exhibit sufficient fluorescence intensity (FI) at -20 °C to -80 °C and possess sensitive responsibility including gel-sol transition and fluorescence behavior for stimuli of mechanical force, heating, pH, H₂O₂, and ethylene diamine tetraacetic acid (EDTA).

Nanotube Template-Directed Formation of Strongly Coupled Dye Aggregates with Tunable Exciton Fluorescence Controlled by Switching between J- and H-Type Electronic Coupling

Strongly coupled dye aggregates with tailored exciton properties may find their use in developing artificial light-harvesting and optoelectronic devices. Here, we report the control of tubular pseudoisocyanine (PIC) dye J- and H-aggregate formation with tunable exciton fluorescence using lithocholic acid (LCA) as a template. The LCA-templated PIC J-aggregate nanotubes formed at a higher LCA/PIC molar ratio (≥5:1) exhibit a sharp, red-shifted absorption band (at 555 nm), intense fluorescence (at 565 nm), and shorter lifetime (200 ps), all indicating their strong superradiance properties. In contrast, the H-aggregate nanotubes formed at a lower LCA/PIC molar ratio (2:1) exhibit a significantly blue-shifted absorption band (at 420 nm) and highly red-shifted fluorescence emission (at 600 nm) with enhanced lifetime (4.40 ns). The controlled switching of the optical properties of the PIC dye aggregates achieved by controlling the LCA/PIC molar ratio could serve as an important guideline for the design of organic photo-functional materials.

Morphologies Transformation of BODIPY-Based Main Chain Supramolecular Polymers Amphiphiles: From Helical Nanowires to Nanosheets

The aggregate morphologies of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) main chain supramolecular polymer amphiphiles (SPA) are tunable by a fine balance of different non-covalent interactions. When the BODIPY segments and sodium cholate are mixed in aqueous solution, they form SPA by electrostatic attraction and hydrogen-bonds. This SPA displays helical nanowires' morphology. After the third component dimeric β-cyclodextrin (β-CD-C) is added, the hydrogen bonds between the cholate are substituted by the host-guest interaction between cholate and β-CD-C. Therefore, these SPA transform their aggregate morphologies into nanosheets' architecture. Therefore, a simple and effective way to regulate self-assembly by non-covalent forces is developed. This supramolecular method may provide an effective way to prepare various nanostructures in aqueous solution and show promising application in the future.

Stretchable self-healing hydrogels capable of heavy metal ion scavenging

Self-healing hydrogels were prepared by simply mixing phytic acid (PA) and chitosan (CS) in water. Determined by scanning electron microscopy (SEM), the hydrogels were found to be a three-dimensional (3D) porous network structure. The formation of the network structure was considered to be mainly driven by electrostatic interactions and hydrogen bonding, cooperating with the subtle balance of multiple noncovalent interactions. The rheological data indicated that the hydrogels presented excellent mechanical properties with an elastic modulus of 20 000 Pa and a yield stress exceeding 7000 Pa. The dynamic dissociation and recombination of hydrogen bonding and electrostatic interaction in fractured regions of the gels initiated the self-healable property of PA/CS hydrogels. Since PA had high coordination ability to metal ions, PA/CS hydrogels were shown to exhibit excellent capability for capturing heavy metal ions, for example, Pb2+ and Cd2+. The PA/CS hydrogels provided a simple, green, and high efficiency strategic approach to scavenging heavy-metal ions from industrial sewage.

Bile Salts: Natural Surfactants and Precursors of a Broad Family of Complex Amphiphiles

Bile salts (BSs) are naturally occurring rigid surfactants with a steroidal skeleton and specific self-assembly and interface behaviors. Using bile salts as precursors, derivatives can be synthesized to obtain molecules with specific functionalities and amphiphilic structure. Modifications on single molecules are normally performed by substituting the least-hindered hydroxyl group on carbon C-3 of the steroidal A ring or at the end of the lateral chain. This leads to monosteroidal rigid building blocks that are often able to self-organize into 1D structures such as tubules, twisted ribbons, and fibrils with helical supramolecular packing. Tubular aggregates are of particular interest, and they are characterized by cross-section inner diameters spanning a wide range of values (3-500 nm). They can form through appealing pH- or temperature-responsive aggregation and in mixtures of bile salt derivatives to provide mixed tubules with tunable charge and size. Other derivatives can be prepared by covalently linking two or more bile salt molecules to provide complex systems such as oligomers, dendrimers, and polymeric materials. The unconventional amphiphilic molecular structure imparts specific features to BSs and derivatives that can be exploited in the formulation of capsules, drug carriers, dispersants, and templates for the synthesis of nanomaterials.

Thiophene containing microporous and mesoporous nanoplates for separation of mercury from aqueous solution

Thiophene-based novel porous polymeric nanoplates synthesized through a template free approach show high mercury capture efficiency from contaminated water and may be promising for environmental applications.

Lactobacillus plantarum CCFM8661 modulates bile acid enterohepatic circulation and increases lead excretion in mice

Probiotics modulate bile acid enterohepatic circulation and increases lead excretion.

Different types, applications and limits of enabling excipients of pharmaceutical dosage forms

Along with the development of novel drug delivery systems the material science is also advancing. Conventional and novel synthetic or natural excipients provide opportunities to design dosage forms of the required features including their bioavailability. Emerging trends in the design and development of drug products indicate an increasing need for the functionality-related characterization of excipients. The purpose of this review is to provide an overview of different types of excipients in relation to their application possibilities in various dosage forms with special focus on the enabling excipients. The study also summarizes the applied excipient systems of research formulations and dosage forms available on the market.

pH-Responsive Nanovesicles with Enhanced Emission Co-Assembled by Ag(I) Nanoclusters and Polyethyleneimine as a Superior Sensor for Al3

Metal nanoclusters (NCs) have been engineered as a new kind of luminescent material, whereas the application of metal NCs in aqueous solution was subjected to great limitations owing to their poor solubility, stability, and strong luminescence quenching in a single-molecule state. Herein, facile supramolecular self-assembly strategy was carried out to enhance the luminescence of Ag(I) NCs (Ag₆-NCs) through multiple electrostatic interactions with polyethyleneimine (PEI). Functional colloid aggregates of Ag₆-NCs such as nanospheres and nanovesicles were formed along with the enhanced emission because of the formation of compact-ordered self-assemblies, which effectively restricted intramolecular vibration of the capping ligands on Ag₆-NCs to diminish the nonradiative decay. All those could block energy loss and facilitated the radiative relaxation of excited states which ultimately induced an aggregation-induced emission (AIE) phenomenon. Furthermore, the luminescent Ag₆-NCs/PEI nanovesicles are pH-responsive and show a superior fluorescent sensing behavior for the detection of Al³⁺ with a limit of detection low to 3 μM. This is the first report about AIE of silver NCs with polymers in aqueous solution. This work sheds light on the controlled NCs-based supramolecular self-assembly and the NCs-based functional materials, which will be well-established candidates in controllable drug delivery, biomarkers, and sensors in aqueous solution.

A Review on Recent Advances in Stabilizing Peptides/Proteins upon Fabrication in Hydrogels from Biodegradable Polymers

Hydrogels evolved as an outstanding carrier material for local and controlled drug delivery that tend to overcome the shortcomings of old conventional dosage forms for small drugs (NSAIDS) and large peptides and proteins. The aqueous swellable and crosslinked polymeric network structure of hydrogels is composed of various natural, synthetic and semisynthetic biodegradable polymers. Hydrogels have remarkable properties of functionality, reversibility, sterilizability, and biocompatibility. All these dynamic properties of hydrogels have increased the interest in their use as a carrier for peptides and proteins to be released slowly in a sustained manner. Peptide and proteins are remarkable therapeutic agents in today's world that allow the treatment of severe, chronic and life-threatening diseases, such as diabetes, rheumatoid arthritis, hepatitis. Despite few limitations, hydrogels provide fine tuning of proteins and peptides delivery with enormous impact in clinical medicine. Novels drug delivery systems composed of smart peptides and molecules have the ability to drive self-assembly and form hydrogels at physiological pH. These hydrogels are significantly important for biological and medical fields. The primary objective of this article is to review current issues concerned with the therapeutic peptides and proteins and impact of remarkable properties of hydrogels on these therapeutic agents. Different routes for pharmaceutical peptides and proteins and superiority over other drugs candidates are presented. Recent advances based on various approaches like self-assembly of peptides and small molecules to form novel hydrogels are also discussed. The article will also review the literature concerning the classification of hydrogels on a different basis, polymers used, "release mechanisms" their physical and chemical characteristics and diverse applications.

Investigation on the self-assembled behaviors of C18unsaturated fatty acids in arginine aqueous solution

Self-assembled behaviors of UFAs in arginine solution have provided a theoretical basis for the application of two functional molecules in drug delivery.

Conformation Control of a Conjugated Polymer through Complexation with Bile Acids Generates Its Novel Spectral and Morphological Properties

Control of higher-order polymer structures attracts a great deal of interest for many researchers when they lead to the development of materials having various advanced functions. Among them, conjugated polymers that are useful as starting materials in the design of molecular wires are particularly attractive. However, an equilibrium existing between isolated chains and bundled aggregates is inevitable and has made their physical properties very complicated. As an attempt to simplify this situation, we previously reported that a polymer chain of a water-soluble polythiophene could be isolated through complexation with a helix-forming polysaccharide. More recently, a covalently self-threading polythiophene was reported, the main chain of which was physically protected from self-folding and chain-chain π-stacking. In this report, we wish to report a new strategy to isolate a water-soluble polythiophene and to control its higher-order structure by a supramolecular approach: that is, among a few bile acids, lithocholate can form stoichiometric complexes with cationic polythiophene to isolate the polymer chain, and the higher-order structure is changeable by the molar ratio. The optical and morphological studies have been thoroughly performed, and the resultant complex has been applied to the selective recognition of two AMP structural isomers.

Two Gelation Mechanisms of Deoxycholate with Inorganic Additives: Hydrogen Bonding and Electrostatic Interactions

This work describes the gelation behaviors of a biological amphiphile, deoxycholate (DC(-)), in aqueous solution by adding inorganic salts and modulating pH. Electrostatic interaction and hydrogen bonding can separately act as the controlling interaction for the hydrogel formation. The hydrogels formed at higher pH (about 8.5) through introducing monovalent inorganic cations (Na(+)) are mainly driven by electrostatic interaction between deoxycholate species and Na(+) ions. When pH is decreased, with the formation of DCA molecules, hydrogen bonding between DC(-) and DCA come into being another leading role to construct the hydrogels, which can induce the gels within an appropriate pH region (6.7-7.3) without inorganic cations. Gels constructed through the self-assembly of deoxycholate present diverse properties according to the difference in the main driving force. Moreover, the combination of the two important interactions can significantly enhance the gelation ability.

Self-assembled structural transition inl-Arg/H-AOT mixtures driven by double hydrogen bonding

The addition of H-AOT tol-Arg solution leads to the transition of the self-assembled structures, which is driven by the synergistic effect of the double hydrogen bonding, electrostatic interaction and hydrophobic effect.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Hydrogels Triggered by Metal Ions as Precursors of Network CuS for DNA Detection

The gelation behavior of lithocholate (LC(-) ) with different metal ions in water was investigated. The microstructures of hydrogels were determined to be three-dimensional (3D) networks of fibrous aggregates. The formation of fibrils was speculated to be mainly driven by the coordination between carboxylate of LC(-) and metal ions, accompanied by the assistance of noncovalent interactions such as electrostatic and hydrophobic interactions. The hydrogels, which can maintain the mechanical strength at higher temperature, exhibit thermal stability. Their gelation capability was enhanced with the increase in acidity. The hydrogels of LC(-) and Cu(2+) mixtures served as the precursors for producing network nanostructures of CuS nanoparticles. These new CuS networks exhibit high fluorescence quenching ability and can act as an effective fluorescent sensing platform for ssDNA detection.

CO2-Controllable Foaming and Emulsification Properties of the Stearic Acid Soap Systems

Fatty acids, as a typical example of stearic acid, are a kind of cheap surfactant and have important applications. The challenging problem of industrial applications is their solubility. Herein, three organic amines-ethanolamine (EA), diethanolamine (DEA), and triethanolamine (TEA)-were used as counterions to increase the solubility of stearic acid, and the phase behaviors were investigated systematically. The phase diagrams were delineated at 25 and 50 °C, respectively. The phase-transition temperature was measured by differential scanning calorimetry (DSC) measurements, and the microstructures were vesicles and planar sheets observed by cryogenic transmission electron microscopy (cryo-TEM) observations. The apparent viscosity of the samples was determined by rheological characterizations. The values, rcmc, for the three systems were less than 30 mN·m(-1). Typical samples of bilayers used as foaming agents and emulsifiers were investigated for the foaming and emulsification assays. CO2 was introduced to change the solubility of stearic acid, inducing the transition of their surface activity and further achieving the goal of defoaming and demulsification.

Tailoring supramolecular nanotubes by bile salt based surfactant mixtures

An approach for tailoring self-assembled tubular structures is described. By controlling the relative composition of a two-component surfactant mixture comprising the natural bile salt lithocholate and its bolamphiphilic derivative, it was possible to finely tune the nanotube cross-section of the mixed tubular aggregates that self-associated spontaneously in aqueous solution at pH 12. The diameter was found to vary up to 50% when the stoichiometric ratio of the two bile salts was changed. The tuning of supramolecular nanochannels with such remarkable precision is of significant interest for technological applications of these materials.

Controllable self-assemblies of sodium benzoate in different solvent environments

Sodium benzoate is an important and widely used food additive, however, it's self-assembly properties in diverse solvents have been rarely studied. Here, we systematically report its various self-assemblies in different solvents environments.

Fluorescent hydrogels with tunable nanostructure and viscoelasticity for formaldehyde removal

Hydrogels with ultrahigh water content, ∼99 wt %, and highly excellent mechanical strength were prepared by 4'-para-phenylcarboxyl-2,2':6',2″-terpyridine (PPCT) in KOH aqueous solution. The self-assembled structure, rheological properties, and the gel-sol transformation temperature (Tgel-sol) of PPCT/KOH hydrogels that depend on PPCT and KOH concentrations were studied, indicating easily controllable conditions for producing hydrogels in PPCT and KOH mixtures. An important finding was that the hydration radius (Rh) of cations (M(+) = Li(+), Na(+), K(+), Cs(+), NH4(+), (CH3)4N(+), (CH3CH2)4N(+), (CH3CH2CH2)4N(+), (CH3CH2CH2CH2)4N(+)) plays a vital role in gelation of PPCT/MOH systems. To produce hydrogels in PPCT/MOH systems, the Rh of M(+) must be in a suitable region of 3.29 to 3.58 Å, e.g., K(+), Na(+), Cs(+), and the capability of M(+) for inducing PPCT to form hydrogels is K(+) > Na(+) > Li(+), which is followed by the Hofmeister series. The hydrogels of PPCT and KOH mixtures are responsive to external stimuli including temperature and shearing force, and present gelation-induced enhanced fluorescence emission property. The states of being sensitive to the stimuli can readily recover to the original hydrogels, which are envisaged to be an attracting candidate to produce self-healing materials. A typical function of the hydrogels of PPCT and KOH mixtures is that formaldehyde (HCHO) can speedily be adsorbed via electrostatic interaction and converted into nontoxic salts (HCOOK and CH3OK), making it a promising candidate material for HCHO removal in home furnishings to reduce indoor environmental pollutants.

Sugar-bile acid-based bolaamphiphiles: from scrolls to monodisperse single-walled tubules

The introduction of a mannose residue on carbon 3 of lithocholic acid gives rise to an asymmetric and rigid bolaamphiphilic molecule, which self-assembles in water to form elongated tubular aggregates with an outer diameter of about 20 nm. These tubular structures display a temporal evolution, where the average tube diameter decreases with time, which can be followed by time-resolved small-angle X-ray scattering experiments. Cryogenic transmission electron microscopy images collected as a function of time show that at short times after preparation tubular scrolls are formed via the rolling of layers, after which a complex transformation of the scrolls into single-walled tubules takes place. At long time scales, a further evolution occurs where the tubules both elongate and become narrower. The observed self-assembly confirms the tendency of bile acids and their derivatives to form supramolecular aggregates with an ordered packing of the constituent molecules. It also demonstrates that scrolls can be formed as intermediate structures in the self-assembly process of monodisperse single-walled tubules.

Self-assembled structures of amphiphiles regulated via implanting external stimuli

This review article has summarized recent achievements of manipulating amphiphilic molecules and their self-assembled structures via different external stimuli.