Chemoselective Hydrazine-mediated Transfer Hydrogenation of Nitroarenes by Co3O4Nanoparticles Immobilized on an Al/Si-mixed Oxide Support

Carboxymethyl β-Cyclodextrin Assistance for the 4-Nitrophenol Reduction Using Cobalt-Based Layered Double Hydroxides

Cobalt-aluminum-layered double hydroxides containing carboxymethyl β-cyclodextrin (CMβCD) were synthesized by coprecipitation and evaluated as a cobalt source for the 4-nitrophenol reduction in an aqueous medium. Several physicochemical techniques (XRD, FTIR, TGA) indicated the intercalation of the anionic cyclodextrin without damages to the hydrotalcite-type structure. These lamellar cobalt-aluminum hybrid materials (CoAl_CMβCD) were evaluated in the 4-nitrophenol reduction and showed higher activities in comparison with the CMβCD-free standard material (CoAl_CO3). To rationalize these results, a set of experimental controls going from physical mixtures of CoAl_CO3 with different cyclodextrins to other cobalt-based materials were investigated, highlighting the beneficial effects of both the layered double hydroxide and CMβCD-based hybrid structures. CMβCD also showed a beneficial effect as an additive during the 4-nitrophenol reduction. CoAl_CO3, dispersed in a fresh CMβCD solution could be re-used for five successive cycles without the loss of activity.

Gold nanoparticle-decorated earth-abundant clay nanotubes as catalyst for the degradation of phenothiazine dyes and reduction of 4-(4-nitrophenyl)morpholine

In the present work, halloysite nanotubes modified with gold nanoparticles (AuNPs-HNT) are successfully prepared by wet chemical method for the catalytic degradation of phenothiazine dyes (azure B (AZB) and toluidine blue O (TBO)) and also cleaner reduction of 4-(4-nitrophenyl)morpholine (4NM) in the sodium borohydride (NaBH4) media. The catalyst is formulated by modifying the HNT support with a 0.964% metal loading using the HNT supports modified with 3-aminopropyl-trimethoxysilane (APTMS) coupling agent to facilitate the anchoring sites to trap the AuNPs and to prevent their agglomeration/aggregation. The AuNPs-HNT catalyst is investigated for structural and morphological characterization to get insights about the formation of the catalyst for the effective catalytic reduction of dyes and 4NM. The microscopic studies demonstrate that AuNPs (2.75 nm) are decorated on the outer surface of HNT. The as-prepared AuNPs-HNT catalyst demonstrates AZB and TBO dye degradation efficiency up to 96% in 10 and 11 min, respectively, and catalytic reduction of 4NM to 4-morpholinoaniline (MAN) is achieved up to 97% in 11 min, in the presence of NaBH4 without the formation of any by-products. The pseudo-first-order rate constant (K1) value of the AuNPs-HNT catalyst for AZB, TBO, and 4NM were calculated to be 0.0078, 0.0055, and 0.0066 s-1, respectively. Moreover, the synthesized catalyst shows an excellent reusability with stable catalytic reduction for 7 successive cycles for both the dyes and 4NM. A plausible mechanism for the catalytic dye degradation and reduction of 4NM by AuNPs-HNT catalyst is proposed as well. The obtained results clearly indicate the potential of AuNPs-HNT as an efficient catalyst for the removal of dye contaminants from the aquatic environments and cleaner reduction of 4NM to MAN, insinuating future pharmaceutical applications.

Reusable Cobalt-Catalyzed Selective Transfer Hydrogenation of Azoarenes and Nitroarenes

Herein, control transfer hydrogenation (TH) of azoarenes to hydrazo compounds is established employing easy-to-synthesize reusable cobalt catalyst using lower amounts of N₂H₄·H₂O under mild conditions. With this effective methodology, a library of symmetrical and unsymmetrical azoarene derivatives was successfully converted to their corresponding hydrazo derivatives. Further, this protocol was extended to the TH of nitroarenes to amines with good-to-excellent yields. Several kinetic studies along with Hammett studies were carried out to understand the plausible mechanism and the electronic effects in this transformation. This inexpensive catalyst can be recycled up to five times without considerable loss of catalytic activity.

Alumina supported copper oxide nanoparticles (CuO/Al2O3) as high-performance electrocatalysts for hydrazine oxidation reaction

Direct hydrazine liquid fuel cell (DHFC) is perceived as effectual energy generating mean owing to high conversion efficiency and energy density. However, the development of well-designed, cost effective and high performance electrocatalysts is the paramount to establish DHFCs as efficient energy generating technology. Herein, gamma alumina supported copper oxide nanocatalysts (CuO/Al₂O₃) are synthesized via impregnation method and investigated for their electrocatalytic potential towards hydrazine oxidation reaction. CuO with different weight percentages i.e., 4%, 8%, 12%, 16% and 20% are impregnated on gamma alumina support. X-ray diffraction analysis revealed the cubic crystal structure and nanosized particles of the prepared metal oxides. Transmission electron microscopy also referred to the cubic morphology and nanoparticle formation. Electrochemical oxidation potential of the CuO/Al₂O₃ nanoparticles is explored via cyclic voltammetry as the analytical tool. Optimization of conditions and electrocatalytic studies shown that 16% CuO/Al₂O₃ presented the best electronic properties towards N₂H₂ oxidation reaction. BET analysis ascertained the high surface area (131.2546 m² g¹) and large pore diameter (0.279605 cm³ g^-1) for 16% CuO/Al₂O₃. Nanoparticle formation, high porosity and enlarged surface area of the proposed catalysts resulted in significant oxidation current output (600 μA), high current density (8.2 mA cm^-2) and low charge transfer resistance (3.7 kΩ). Electrooxidation of hydrazine on such an affordable and novel electrocatalyst opens a gateway to further explore the metal oxide impregnated alumina materials for different electrochemical applications.

Mild and Efficient Heterogeneous Hydrogenation of Nitroarenes Facilitated by a Pyrolytically Activated Dinuclear Ni(II)-Ce(III) Diimine Complex

We communicate the assembly of a solid, Ce-promoted Ni-based composite that was applied as catalyst for the hydrogenation of nitroarenes to afford the corresponding organic amines. The catalytically active material described herein was obtained through pyrolysis of a SiO₂-pellet-supported bimetallic Ni-Ce complex that was readily synthesized prior to use from a MeO-functionalized salen congener, Ni(OAc)₂·4 H₂O, and Ce(NO₃)₃·6 H₂O. Rewardingly, the requisite ligand for the pertinent solution phase precursor was accessible upon straightforward and time-saving imine condensation of ortho-vanillin with 1,3-diamino-2,2′-dimethylpropane. The introduced catalytic protocol is operationally simple in that the whole reaction set-up is quickly put together on the bench without the need of cumbersome handling in a glovebox or related containment systems. Moreover, the advantageous geometry and compact-sized nature of the used pellets renders the catalyst separation and recycling exceptionally easy.

A uniformly anchored zirconocene complex on magnetic reduced graphene oxide (rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2)) as a novel and reusable nanocatalyst for synthesis of N-arylacetamides and reductive-acetylation of nitroarenes

In this study, a crafted zirconocene complex on rGO@Fe3O4 as a novel magnetic nanocatalyst was synthesized and then characterized using FT-IR, SEM, EDX, VSM, ICP-OES, TGA, BET and MS analyses. Next, catalytic activity of the prepared nanocomposite rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) towards successful reduction of aromatic nitro compounds to arylamines using N2H4·H2O (80%) was investigated. The examined nanocatalyst also showed perfect catalytic activity for reductive-acetylation of aromatic nitro compounds to the corresponding N-arylacetamides without isolation of the prepared in situ amines using the N2H4·H2O/Ac2O system. Furthermore, acetylation of the commercially available arylamines to the corresponding N-arylacetamides was carried out by acetic anhydride in the presence of the rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) nanocomposite. All reactions were carried out in refluxing EtOH as a green solvent to afford the products in high yields. The obtained results exhibited that the nanocomposite of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) showed a great catalytic activity in comparison to rGO and rGO@Fe3O4 as the parent constituents. Recovery and reusability of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) were also examined for 8 consecutive cycles without significant loss of the catalytic activity. This establishes the sustainable anchoring of the zirconocene complex on the surface and mesopores of the rGO@Fe3O4 nanohybrid system.

Generation of Cobalt-Containing Nanoparticles on Carbon via Pyrolysis of a Cobalt Corrole and Its Application in the Hydrogenation of Nitroarenes

We report on the manufacture of a state-of-the-art heterogeneous non-noble metal catalyst, which is based on a molecularly well-defined phosphine-tagged cobalt corrole complex. This precursor compound is readily synthesized from convenient starting materials while the active material is obtained through wet-impregnation of the pertinent metalliferous macrocycle onto carbon black followed by controlled pyrolysis of the loaded carrier material under an inert gas atmosphere. Thus, the obtained composite was then applied in the heterogeneous hydrogenation of various nitroarenes to yield a vast array of valuable aniline derivatives that were conveniently isolated as their hydrochloride salts. The introduced catalytic protocol is robust and user-friendly with the entire assembly of the reaction set-up enabling the conduction of the experiments on the laboratory bench without any protection from air.

Selective Reduction of Nitroarenes to Arylamines by the Cooperative Action of Methylhydrazine and a Tris(N-heterocyclic thioamidate) Cobalt(III) Complex

We report an efficient catalytic protocol that chemoselectively reduces nitroarenes to arylamines, by using methylhydrazine as a reducing agent in combination with the easily synthesized and robust catalyst tris(N-heterocyclic thioamidate) Co(III) complex [Co(κS,N-tfmp2S)₃], tfmp2S = 4-(trifluoromethyl)-pyrimidine-2-thiolate. A series of arylamines and heterocyclic amines were formed in excellent yields and chemoselectivity. High conversion yields of nitroarenes into the corresponding amines were observed by using polar protic solvents, such as MeOH and ⁱPrOH. Among several hydrogen donors that were examined, methylhydrazine demonstrated the best performance. Preliminary mechanistic investigations, supported by UV-vis and NMR spectroscopy, cyclic voltammetry, and high-resolution mass spectrometry, suggest a cooperative action of methylhydrazine and [Co(κS,N-tfmp2S)₃] via a coordination activation pathway that leads to the formation of a reduced cobalt species, responsible for the catalytic transformation. In general, the corresponding N-arylhydroxylamines were identified as the sole intermediates. Nevertheless, the corresponding nitrosoarenes can also be formed as intermediates, which, however, are rapidly transformed into the desired arylamines in the presence of methylhydrazine through a noncatalytic path. On the basis of the observed high chemoselectivity and yields, and the fast and clean reaction processes, the present catalytic system [Co(κS,N-tfmp2S)₃]/MeNHNH₂ shows promise for the efficient synthesis of aromatic amines that could find various industrial applications.

Cobalt Entrapped in N,S-Codoped Porous Carbon: Catalysts for Transfer Hydrogenation with Formic Acid

Catalysts with Co nanoparticles (NPs) entrapped in N,S-codoped carbon shells were successfully fabricated by pyrolysis of porous organic polymers (POPs) with cobalt salts. The encapsulated structure consisting of Co NPs and N,S-codoped carbon layers was verified by TEM, XRD, and X-ray photoelectron spectroscopy. The catalysts displayed excellent activity and stability for the catalytic transfer hydrogenation (CTH) of nitrobenzene with formic acid under base-free conditions. Furthermore, the resultant catalysts allowed for highly efficient and selective transfer hydrogenation of various functionalized nitroarenes to the corresponding anilines. Through control experiments, the covered Co NPs were identified as active sites for CTH. The incorporation of S into the N-doped carbon lattice promoted the electron transfer from metallic cobalt NPs to their shells, which played a significant role in the acceleration of CTH. Moreover, the Co-NSPC-850 catalyst pyrolyzed at 850 °C showed excellent stability in the recycling experiments.

Reduction of Nitro Compounds Using 3d-Non-Noble Metal Catalysts

The reduction of nitro compounds to the corresponding amines is one of the most utilized catalytic processes in the fine and bulk chemical industry. The latest development of catalysts with cheap metals like Fe, Co, Ni, and Cu has led to their tremendous achievements over the last years prompting their greater application as "standard" catalysts. In this review, we will comprehensively discuss the use of homogeneous and heterogeneous catalysts based on non-noble 3d-metals for the reduction of nitro compounds using various reductants. The different systems will be revised considering both the catalytic performances and synthetic aspects highlighting also their advantages and disadvantages.

Solid-state nanocasting synthesis of ordered mesoporous CoNx-carbon catalysts for highly efficient hydrogenation of nitro compounds

Selective catalytic hydrogenation of nitro compounds (NCs) is an attractive challenge with significant research being focused on the development of cobalt (Co)-based nanocatalysts. Herein, in order to achieve high activity and selectivity for the catalytic hydrogenation of NCs and identify the essential active Co-containing sites, a facile solid-state nanocasting approach is developed for the controllable synthesis of CoNx-doped ordered mesoporous carbon materials (denoted as CoNx-OMCs). Compared with the previous nanocasting synthesis of mesoporous catalysts, the current method requires no solvent and relies on melting and interfacial chemical interactions between silica and the precursors for loading and casting, and chemical coordination among the precursors for the formation and dispersion of the active sites. The resulting CoNx-OMCs possess high surface areas (∼941 m2 g-1), ordered mesopores (∼4.0 nm), high N content (∼6.8 wt%) and abundant CoNx sites and fine metallic Co nanoparticles. With molecular H2 as the reducing agent, the optimized catalyst delivers very attractive catalytic activities (100% conversions), selectivities (close to 100% selectivities) and stability (no obvious performance decay after cycling) in the hydrogenation of a series of NCs carrying diverse groups in aqueous solutions under mild conditions. A comparative study clearly reveals that the CoNx sites, not the metallic Co nanoparticles, are the key active sites for the hydrogenation of NCs. The CoNx sites are found to preferentially adsorb nitro groups, thus activating them and promoting their reduction. A detailed study reveals that the high catalytic performance relies on the synergistic cooperation of the catalyst composition and structure, which are tuneable by adjusting the synthetic conditions.

High Catalytic Performance of a CeO2-Supported Ni Catalyst for Hydrogenation of Nitroarenes, Fabricated via Coordination-Assisted Strategy

A family of two-dimensional salen-type lanthanide complexes was synthesized through a facile solution diffusion method. The two-dimensional lanthanide complexes were characterized by single-crystal X-ray diffraction (SCXRD) and X-ray photoelectron spectroscopy (XPS) analytical techniques. The SCXRD and XPS analyses reveal that the obtained two-dimensional structures are rich in uncoordinated imine (-CH═N-) groups located on the skeleton of the salen-type organic ligand, which retain strong coordination ability with metal ions. On the basis of this unique feature, a highly dispersed CeO₂-supported Ni catalyst (Ni/CeO₂-CAS) with highly strong metal-support interaction was first synthesized via a coordination-assisted synthesis (CAS) method, which exhibits a much better catalytic activity in the hydrogenation of nitrobenzene than the traditional Ni/CeO₂-IWI catalyst prepared by incipient wetness impregnation (IWI). The origin of the improved catalytic activity of Ni/CeO₂-CAS as well as the role of Ni@Ce-H₂salen was revealed by using diverse characterizations. On the basis of the comparative characterization results, the superior catalytic performance of Ni/CeO₂-CAS to Ni/CeO₂-IWI could have resulted from the smaller and highly dispersed Ni nanoparticulates, the intensified Ni-CeO₂ interaction, the enhanced NiO reducibility, and the higher concentration of oxygen vacancies, favoring the H₂ dissociation and adsorption of the nitrobenzene reactant. The Ni/CeO₂-CAS catalyst also exhibits high catalytic performance for reduction of diverse nitroarenes to their corresponding functionalized arylamines. We anticipated that this coordination-assisted strategy may provide a new way for preparing other highly oxide-supported catalysts with potential applications in various catalytic reactions.

Co-Ag alloy protected by nitrogen doped carbon as highly efficient and chemoselective catalysts for the hydrogenation of halogenated nitrobenzenes

The design of lower-cost alternative heterogeneous catalysts for the hydrogenation of halogenated nitrobenzenes using green method to synthesize the corresponding anilines is highly desirable. In this study, Ag was incorporated into the Co-MOFs during the growing process (Co-Ag(n)-MOFs), and then followed the carbothermal reduction process without any additional procedures, we synthesized a series of Co-Ag(n)@NCs. The self-supported catalysts exhibited excellent and stable catalytic performances for the chemoselective hydrogenation of halogenated nitrobenzenes without obvious dehalogenation. The Co-Ag bimetallic alloy nanoparticles were well-dispersed and protected from aggregation and leaching by the porous nitrogen doped carbon. Besides, either hydrazine hydrate (N₂H₄·H₂O, generating byproducts N₂ and H₂O) or H₂ could be used as green reducing agent with excellent selectivity towards synthesizing the corresponding anilines. And when the Co/Ag content ratio was approximate 1:1, the Co-Ag(1:1)@NC showed the best catalytic performance. Moreover, the Co-Ag(1:1)@NC could be efficiently recovered by using an external magnetic force and reused without obvious decrease of catalytic activity. Thus, such highly efficient, inexpensive, stable and magnetically recyclable catalysts could show great potentials in practical applications for many important reactions.