Catalytic Systems for the Cross-Linking of Organosilicon Polymers

Using the Quartz Crystal Microbalance to Monitor the Curing of Drying Oils

Drying oils such as linseed oil form a polymer network through a complex free-radical polymerization process. We have studied polymerization in this challenging class of polymers using a quartz crystal microbalance (QCM). The QCM is able to measure the evolution of polymer mass and mechanical properties as the oil transitions from a liquid-like to a solid-like state. Measurements using bulk materials and thin films provide information about the initial polymerization phase as well as the evolution of the mass and mechanical properties over the first two years of cure. The temperature-dependent response of the cured linseed oil films was also measured. These results were combined with previously published results obtained from traditional dynamic mechanical analysis to give a unified picture of the properties of these materials across a very broad temperature range.

Synthesis of Vinyl-Containing Polydimethylsiloxane in An Active Medium

This research deals with the synthesis of copoly(methylvinyl)(dimethyl)siloxanes by the copolycondensation of dimethyldiethoxy- and methylvinyldimethoxysilane in an active medium, followed by thermal condensation in a vacuum. We achieved a range of copolymers exhibiting finely tuned molecular weights spanning between 1500 and 20,000 with regulated functional methylvinylsiloxane units. Analysis of the microstructure showed that the copolymerization predominantly formed products demonstrating a random distribution of units (R~1). However, an increase in the content of vinyl-containing monomers increases the R parameter, indicating an enhanced tendency towards alternating linkages within the copolymer matrix.

Radical chemistry in polymer science: an overview and recent advances

Radical chemistry is one of the most important methods used in modern polymer science and industry. Over the past century, new knowledge on radical chemistry has both promoted and been generated from the emergence of polymer synthesis and modification techniques. In this review, we discuss radical chemistry in polymer science from four interconnected aspects. We begin with radical polymerization, the most employed technique for industrial production of polymeric materials, and other polymer synthesis involving a radical process. Post-polymerization modification, including polymer crosslinking and polymer surface modification, is the key process that introduces functionality and practicality to polymeric materials. Radical depolymerization, an efficient approach to destroy polymers, finds applications in two distinct fields, semiconductor industry and environmental protection. Polymer chemistry has largely diverged from organic chemistry with the fine division of modern science but polymer chemists constantly acquire new inspirations from organic chemists. Dialogues on radical chemistry between the two communities will deepen the understanding of the two fields and benefit the humanity.

Progress in research on the safety of silicone rubber products in food processing

Silicone rubber (SR) is widely used in the food processing industry due to its excellent physical and chemical properties. However, due to the differences in SR product production formulas and processes, the quality of commercially available SR products varies greatly, with chemical and biological hazard potentials. Residual chemicals in SR, such as siloxane oligomers and 2,4-dichlorobenzoic acid, are non-intentionally added substances, which may migrate into food during processing so the safe use of SR must be guaranteed. Simultaneously, SR in contact with food is susceptible to pathogenic bacteria growing and biofilm formation, like Cronobacter sakazakii, Staphylococcus aureus, Salmonella enteritidis, and Listeria monocytogenes, posing a food safety risk. Under severe usage scenarios such as high-temperature, high-pressure, microwave, and freezing environments with long-term use, SR products are more prone to aging, and their degradation products may pose potential food safety hazards. Based on the goal of ensuring food quality and safety to the greatest extent possible, this review suggests that enterprises need to prepare high-quality food-contact SR products by optimizing the manufacturing formula and production process, and developing products with antibacterial and antiaging properties. The government departments should establish quality standards for food-contact SR products and conduct effective supervision. Besides, the reusable SR products should be cleaned by consumers immediately after use, and the deteriorated products should be replaced as soon as possible.

Marine biofouling and the role of biocidal coatings in balancing environmental impacts

Marine biofouling is a global problem affecting various industries, particularly the shipping industry due to long-distance voyages across various ecosystems. Therein fouled hulls cause increased fuel consumption, greenhouse gas emissions, and the spread of invasive aquatic species. To counteract these issues, biofouling management plans are employed using manual cleaning protocols and protective coatings. This review provides a comprehensive overview of adhesion strategies of marine organisms, and currently available mitigation methods. Further, recent developments and open challenges of antifouling (AF) and fouling release (FR) coatings are discussed with regards to the future regulatory environment. Finally, an overview of the environmental and economic impact of fouling is provided to point out why and when the use of biocidal solutions is beneficial in the overall perspective.

Facile Synthesis of Sulfur-Containing Functionalized Disiloxanes with Nonconventional Fluorescence by Thiol-Epoxy Click Reaction

Herein, a series of novel sulfur-containing functionalized disiloxanes based on a low-cost and commercially available material, i.e., 1,3-bis(3-glycidoxypropyl)-1,1,3,3-tetramethyldisiloxane, and various thiol compounds were prepared by thiol-epoxy click reaction. It was found that both lithium hydroxide (LiOH) and tetrabutylammonium fluoride (TBAF) have high catalytic activity after optimizing the reaction condition, and the reaction can be carried out with high yields, excellent regioselectivity, mild reaction condition, and good tolerance of functional groups. These compounds exhibit excellent nonconventional fluorescence due to the formation of coordination bonds between Si atoms and heteroatoms (e.g., S or N) and can emit blue fluorescence upon ultraviolet (UV) irradiation. These results demonstrate that the thiol-epoxy click reaction could promisingly act as an efficient organosilicon synthetic methodology to construct various organosilicon materials with novel structures and functionality, and thus their application scope will be significantly expanded.

The applications of 3D printing in wound healing: the external delivery of stem cells and antibiosis

As the global number of chronic wound patients rises, the financial burden and social pressure on patients increase daily. Stem cells have emerged as promising tissue engineering seed cells due to their enriched sources, multidirectional differentiation ability, and high proliferation rate. However, delivering them in vitro for the treatment of skin injury is still challenging. In addition, bacteria from the wound site and the environment can significantly impact wound healing. In the last decade, 3D bioprinting has dramatically enriched cell delivery systems. The produced scaffolds by this technique can be precisely localized within cells and perform antibacterial actions. In this review, we summarized the 3D bioprinting-based external delivery of stem cells and their antibiosis to improve wound healing.

Tannic Acid Crosslinked Self-Healing and Reprocessable Silicone Elastomers with Improved Antibacterial and Flame Retardant Properties

Silicone elastomers are widely used in aviation, electronics, automotive, and medical device fields, and their overuse inevitably causes recycled problems. In addition, the elastomers are subject to attack by bacteria and fire during use in some application scenarios, which is a safety hazard. Therefore, there is a great need to prepare silicone elastomers with improved antibacterial, flame retardant, self-healing, and recyclable functions. A new strategy is proposed to prepare silicone elastomers with bio-based tannic acid as cross-linkers to solve this problem by using polydimethylsiloxane as a soft chain segment and 2,2-bis(hydroxymethyl)propionic acid as an intermediate chain extender. Based on the phenol carbamate bonding and hydrogen bonding interactions, the elastomer has efficient self-healing ability and can achieve dynamic dissociation at 120 °C for complete recovery. In addition, due to the unique spatial structure and polyphenolic hydroxyl groups of tannic acid, the mechanical properties of the elastomer are greatly improved with an antimicrobial efficiency of over 90% and a final oxygen index of 25.5%. The multifunctional silicone elastomer has great potential applications in recyclable refractory materials and antimicrobial materials.

Self-Restructuring of Polyhydromethylsiloxanes by the Hydride Transfer Process: A New Approach to the Cross-Linking of Polysiloxanes and to the Fabrication of Thin Polysiloxane Coatings

The branching and cross-linking of siloxane polymers are important processes in silicone technology. A new type of such a process has been developed, which is a self-restructuring of linear polyhydromethylsiloxane (PHMS). This process involves the reorganization of the PHMS to form a highly branched siloxane polymer or finally a cross-linked siloxane network. It occurs through the transfer of a hydride ion between silicon atoms catalyzed by tris(pentafluoromethyl)borane. Its advantage over existing branching and cross-linking reactions is that it runs at room temperature without a low-molecular-weight cross-linker in the absence of water, silanol groups, or other protic compounds and it does not use metal catalysts. The study of this process was carried out in toluene solution. Its course was followed by ¹H NMR, ²⁹Si NMR and FTIR, SEC, and gas chromatography. A general mechanism of this new self-restructuring process supported by quantum calculations is proposed. It has been shown that a linear PHMS self-restructured to a highly branched polymer can serve as a pure methylsiloxane film precursor.

The ultimate Lewis acid catalyst: using tris(pentafluorophenyl) borane to create bespoke siloxane architectures

The breadth of utility of a commercially available and stable strong Lewis acid catalyst, tris(pentafluorophenyl)borane, has been explored, highlighting its use towards a wide range of unique siloxane products and their corresponding applications. This article focuses on the variety of different outcomes that this impressive borane offers in controlled and selective manners by the variation of reaction conditions, precursor functionalities, reagent or catalyst loading, and the mechanistic considerations that contribute. With a predominant focus on the Piers-Rubinsztajn reaction and its modifications, tris(pentaflurophenyl)borane's utility is highlighted in the synthesis of linear, cyclic and macrocyclic siloxanes, aryl-/alkoxysiloxanes, and other bespoke products. The significance of the catalytic transformation within the field of siloxane chemistry is discussed alongside some of the challenges that arise from using the borane catalyst.

Evaluation of Heteroleptic Pt (II) β-Diketonate Complexes as Precatalysts for the Photoactivated Curing of Silicone Resins

A library of platinum (II) complexes of general formula (O,O′-β-diketonate)PtLX (L = dimethylsulfoxide, pyridine, triphenylphosphine; X = chloride, γ-acetylacetonate) has been prepared, using synthetic methodologies available in the literature. The library has been supplemented with a novel platinum (II) complex bearing a triazenido N-oxide ligand. The complexes have been characterized and tested as precatalysts for the photoactivated curing of silicone resins. Correlations have been established between the nature of the employed ligands, the ultraviolet-visible (UV-Vis) absorption spectrum of the complexes and their catalytic performance, which enable the tailored preparation of complexes with improved performance in view of possible technological applications.

NiH-catalyzed C(sp3)–Si coupling of alkenes with vinyl chlorosilanes

A novel NiH-catalyzed highly selective cross-coupling of alkenes with vinyl chlorosilanes is developed. Using this practical chemistry, various benzyl organosilanes could be produced with good functional group tolerance.

Tannic Acid as a Natural Crosslinker for Catalyst-Free Silicone Elastomers From Hydrogen Bonding to Covalent Bonding

The construction of silicone elastomers crosslinked by a natural crosslinker under a catalyst-free method is highly desirable. Herein we present catalyst-free silicone elastomers (SEs) by simply introducing tannic acid (TA) as a natural crosslinker when using poly (aminopropylmethylsiloxane-co-dimethylsiloxane) (PAPMS) as the base polymer. The crosslinked bonding of these SEs can be easily changed from hydrogen bonding to covalent bonding by altering the curing reaction from room temperature to heating condition. The formability and mechanical properties of the SEs can be tuned by altering various factors, including processing technique, the amount of TA and aminopropyl-terminated polydimethylsiloxane, the molecular weight and -NH₂ content of PAPMS, and the amount of reinforcing filler. The hydrogen bonding was proved by the reversible crosslinking of the elastomers, which can be gradually dissolved in tetrahydrofuran and re-formed after removing the solvent. The covalent bonding was proved by a model reaction of catechol and n-decylamine and occurred through a combination of hydroxylamine reaction and Michael addition reaction. These elastomers exhibit good thermal stability and excellent hydrophobic property and can bond iron sheets to hold the weight of 500 g, indicating their promising as adhesives. These results reveal that TA as a natural product is a suitable “green” crosslinker for the construction of catalyst-free silicone elastomers by a simple crosslinking strategy. Under this strategy, TA and more natural polyphenols could be certainly utilized as crosslinkers to fabricate more organic elastomers by selecting amine-containing polymers and further explore their extensive applications in adhesives, sealants, insulators, sensors, and so forth.

Main Group Catalysis: Cationic Si(II) and Ge(II) Compounds as Catalysts in Organosilicon Chemistry

Cyclopentadienyl (Cp)-coordinated cationic Si(II) (1) and Ge(II) compounds (2) are a new class of catalysts for various transformations in organosilicon chemistry. This review demonstrates that these compounds effectively catalyze technically important reactions, such as the hydrosilylation of carbon-carbon multiple bonds and various types of siloxane-coupling reactions, e.g., the Piers-Rubinsztajn reaction and the oxidative siloxane coupling reaction. Whereas the cationic Si(II) compounds are sensitive to air and moisture, the corresponding cationic Ge(II) compounds are bench stable, thus offering further advantages. The new catalysts contribute to the growing need for the substitution of transition metals and heavier main group metals by their lighter congeners, especially in industrially relevant organosilicon chemistry.

Spatially Controlled Highly Branched Vinylsilicones

Branched silicones possess interesting properties as oils, including their viscoelastic behavior, or as precursors to controlled networks. However, highly branched silicone polymers are difficult to form reliably using a “grafting to” strategy because functional groups may be bunched together preventing complete conversion for steric reasons. We report the synthesis of vinyl-functional highly branched silicone polymers based, at their core, on the ability to spatially locate functional vinyl groups along a silicone backbone at the desired frequency. Macromonomers were created and then polymerized using the Piers–Rubinsztajn reaction with dialkoxyvinylsilanes and telechelic HSi-silicones; molecular weights of the polymerized macromonomers were controlled by the ratio of the two reagents. The vinyl groups were subjected to iterative (two steps, one pot) hydrosilylation with alkoxysilane and Piers–Rubinsztajn reactions, leading to high molecular weight, highly branched silicones after one or two iterations. The vinyl-functional products can optionally be converted to phenyl/methyl-modified branched oils or elastomers.

Transparent silphenylene elastomers from highly branched monomers

Catalyst free crosslinking of highly branched silphenylene monomers, made using the Piers–Rubinsztajn reaction, leads to high refractive index, soft elastomers.

Co2(CO)8 and unsaturated epoxides as unexpected partners in generating functionalized siloxane oils and cross-linked materials

The unexpected formation of cross-linked silicon materials was observed via hydrosilylation of unsaturated epoxides with polymethylhydrosiloxane using Co₂(CO)₈ as a catalyst.

Co2(CO)8 as an efficient catalyst for the synthesis of functionalized polymethylhydrosiloxane oils and unconventional cross-linked materials

Co₂(CO)₈ was found to be an effective and structurally simple catalyst for the functionalization of polymethylhydrosiloxane into functional silicone fluids using terminal alkenes and into cross-linked silicone materials using unconventional tethers.

A Stimulus-Responsive Polymer Composite Surface with Magnetic Field-Governed Wetting and Photocatalytic Properties

With the increasing demand for liquid manipulation and microfluidic techniques, surfaces with real-time tunable wetting properties are becoming the focus of materials science researches. In this study, we present a simple preparation method for a 0.5-4 µm carbonyl iron (carbonyl Fe) loaded polydimethylsiloxane (PDMS)-based magnetic composite coating with magnetic field-tailored wetting properties. Moreover, the embedded 6.3-16.7 wt.% Ag-TiO₂ plasmonic photocatalyst (d~50 nm) content provides additional visible light photoreactivity to the external stimuli-responsive composite grass surfaces, while the efficiency of this photocatalytic behavior also turned out to be dependent on the external magnetic field. The inclusion of the photocatalyst introduced hierarchical surface roughness to the micro-grass, resulting in the broadening of the achievable contact and sliding angle ranges. The photocatalyst-infused coatings are also capable of catching and releasing water droplets, which alongside their multifunctional (photocatalytic activity and tunable wetting characteristics) nature makes surfaces of this kind the novel sophisticated tools of liquid manipulation.

A metal-free radical technique for cross-linking of polymethylhydrosiloxane or polymethylvinylsiloxane using AIBN

A new method was developed for the metal-free cross-linking of silicone rubbers. This process uses azobisisobutyronitrile (AIBN) to selectively react with Si-H and vinyl groups as a free-radical initiator for the thermal curing of polymethylhydrosiloxane (PMHS) and polymethylvinylsiloxane (PMVS). The AIBN-initiated curing reaction between the Si-H groups of PMHS generated Si-O-Si and Si-Si cross-links. In contrast, PMVS was cured via the formation of C-C bonds through "methyl-vinyl" and "vinyl-vinyl" mechanisms. Curing reactions were performed at 80-120 °C in air and confirmed by 13C and 29Si solid state NMR analyses and swelling trials.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

Facile construction of a double network cross-linked luminescent supramolecular elastomer by hydrosilylation and pillar[5]arene host-guest recognition

Reticulated copolymer host pillar[5]arene cross-linked with poly(dimethylsiloxane) (PDMS) was synthesized for the facile construction of a double network cross-linked elastomer upon noncovalently cross-linking with tetraphenyethylene (TPE)-based tetratopic guests through host-guest interactions. The obtained sample strips had better mechanical properties and luminescence capabilities.

Flexible Cyclosiloxane-Linked Fluorescent Porous Polymers for Multifunctional Chemical Sensors

The construction of porous polymers linked by flexible building units has been considered a great challenge. Here, we address this challenge by using flexible 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxanes to react with brominated pyrene, tetraphenylethene, and spirobifluorene via the Heck reaction, resulting in three cyclosiloxane-linked fluorescent porous polymers. The materials exhibit high porosity, strong fluorescence, and tunable emission colors. Such properties impart the promise of these polymers as candidates for multifunctional chemical sensors to identify latent fingerprints with a strong anti-interference ability under actual conditions (e.g., rainy environment) and to detect nitroaromatic explosives and metal ions, especially 2,4,6-trinitrotoluene or picric acid, and the Fe³⁺ ion, with low limits of detection and a high selectivity. Moreover, a paper sensor was further developed and is found to be sensitive to the solution, solid, and vapor phases of explosives and the Fe³⁺ ion, complete with a rapid response time and visual detection. These results may open up new horizons for exploring porous polymers, particularly those with a strong fluorescence, based on flexible linkers.

Platinum-catalyzed reactions between Si-H groups as a new method for cross-linking of silicones

The platinum-catalyzed self-cross-linking of polymethylhydrosiloxane at RT in air was performed for the first time and proved by 1H, 13C, and 29Si SSNMR and swelling measurements. Quantum chemical modeling of possible structures was investigated. Platinum (0) and (ii) complexes were used as catalysts between the Si-H groups of polymethylhydrosiloxane. Karstedt's catalyst leads to Si-O-Si and Si-Si bond formation, but cis-[PtCl2(BnCN)2] generates predominantly Si-O-Si cross-links. cis-[PtCl2(BnCN)2] allows creating high-quality silicone rubbers without visible mechanical defects. This cross-linking approach can be used to obtain new Si-H-containing silicone materials.

Identification of non-volatile migrants from baby bottles by UPLC-Q-TOF-MS

Baby bottles made of polypropylene, Tritan® and silicone were evaluated regarding the migration of non-volatile compounds using UPLC-QTOF-MS. Twenty-seven compounds were identified. In all polypropylene samples the migration of 2.2'-(tridecylimino)bis-ethanol and derivatives thereof were detected in concentrations below the specific migration limit (1.2 mg.kg^-1). Furthermore, clarifying agents and glycerol derivatives were detected. Tritan baby bottle showed the migration of one slip additive. On the other hand, twenty compounds were detected in silicone baby bottles. Most of them were unknown compounds derived from acrylates. Once the migrants were identified, the risk assessment was carried out using the Threshold of Toxicological Concern (TTC) approach. The risk assessment of migrants coming from silicone samples showed levels above the threshold recommended as safe for babies.

Similar nature leads to improved properties: cyclic organosilicon triperoxides as promising curing agents for liquid polysiloxanes

Cyclic organosilicon triperoxides were found to be vinyl-selective free-radical initiators for thermal curing at 100–180 °C of vinyl-terminated polydimethylsiloxane and trimethylsilyl-terminated polymethylhydrosiloxane producing homogeneous transparent silicone rubbers with antibacterial properties.

Iridium(iii)-catalysed cross-linking of polysiloxanes leading to the thermally resistant luminescent silicone rubbers

Iridium(iii) cross-linking catalysts for silicones show a unique temperature-curing profile and lead to thermally resistant and luminescent silicone rubbers.