DNAzyme-aptamer or aptamer-DNAzyme paradigm: Biochemical approach for aflatoxin analysis

Technique Evolutions for Microorganism Detection in Complex Samples: A Review

Rapid detection of microorganisms is a major challenge in the medical and industrial sectors. In a pharmaceutical laboratory, contamination of medical products may lead to severe health risks for patients, such as sepsis. In the specific case of advanced therapy medicinal products, contamination must be detected as early as possible to avoid late production stop and unnecessary costs. Unfortunately, the conventional methods used to detect microorganisms are based on time-consuming and labor-intensive approaches. Therefore, it is important to find new tools to detect microorganisms in a shorter time frame. This review sums up the current methods and represents the evolution in techniques for microorganism detection. First, there is a focus on promising ligands, such as aptamers and antimicrobial peptides, cheaper to produce and with a broader spectrum of detection. Then, we describe methods achieving low limits of detection, thanks to Raman spectroscopy or precise handling of samples through microfluids devices. The last part is dedicated to techniques in real-time, such as surface plasmon resonance, preventing the risk of contamination. Detection of pathogens in complex biological fluids remains a scientific challenge, and this review points toward important areas for future research.

Photoelectrochemical aptasensors for detection of viruses

Photoelectrochemistry (PEC) is a dynamic discipline studying the effect of light on photoelectrode or photosensitive material, and the conversion from solar energy into electrical power. The basic PEC process refers to the oxidation or reduction reactions between electrochemical active species in solution and photoactive materials that occurred at the electrode/electrolyte interface during illumination. In recent years, the PEC biosensing approaches have also been developed by the combination of the PEC technique with bioanalysis, where the interaction between biological recognition element and analyte influences a photocurrent signal. This involves the charge and energy transfer of PEC reaction between electron donor/acceptor and photoactive material upon light irradiation. Coupling the advantages of PEC bioanalysis and aptamers has provided new concepts for highly selective and sensitive biosensors development, applicable in human health monitoring and environmental protection. In a typical assay, a photoactive material converts the affinity binding properties of aptamers into a detectable electrical signal, presenting an innovative method for probing numerous aptamer-analyte interactions. Using different aptamer probes aiming for specific purposes, more sensing strategies with rational design and exquisite signaling mechanisms have been proposed. This review concentrated on the current topic of PEC aptasensors that are used for the detection of viruses. The prospects in this area are also discussed.

Graphical abstract

Selection of M2+-independent RNA-cleaving DNAzymes with Sidechains Mimicking Arginine and Lysine

Sequence-specific cleavage of RNA by nucleic acid catalysts in the absence of a divalent metal cation (M 2+ ) has remained an important goal in biomimicry with potential therapeutic applications. Given the lack of functional group diversity in canonical nucleotides, modified nucleotides with amino acid-like side chains were used to enhance self-cleavage rates at a single embedded ribonucleoside site. Previous works relied on three functional groups: an amine, a guanidine and an imidazole ensconced on three different nucleosides. However, to date, few studies have systematically addressed the necessity of all three modifications, as the value of any single modified nucleoside is contextualized at the outset of selection. Herein, we report on the use of only two modified dNTPs, excluding an imidazole, i.e. 5-(3-guanidinoallyl)-2'-dUTP (dU ga TP) and 5-aminoallyl-2'-dCTP (dC aa TP), to select in-vitro self-cleaving DNAzymes that cleave in the absence of M 2+ in a pH-independent fashion. Cleavage shows biphasic kinetics with rate constants that are significantly higher than in unmodified DNAzymes and compare favorably to certain DNAzymes involving an imidazole. This work is the first report of a M2+-independent DNAzyme with two cationic modifications; as such it shows appreciable self-cleaving activity in the absence of an imidazole modification.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Recent advances in computational methods for biosensor design

Biosensors are analytical tools with a great application in healthcare, food quality control, and environmental monitoring. They are of considerable interest to be designed by using cost-effective and efficient approaches. Designing biosensors with improved functionality or application in new target detection has been converted to a fast-growing field of biomedicine and biotechnology branches. Experimental efforts have led to valuable successes in the field of biosensor design; however, some deficiencies restrict their utilization for this purpose. Computational design of biosensors is introduced as a promising key to eliminate the gap. A set of reliable structure prediction of the biosensor segments, their stability, and accurate descriptors of molecular interactions are required to computationally design biosensors. In this review, we provide a comprehensive insight into the progress of computational methods to guide the design and development of biosensors, including molecular dynamics simulation, quantum mechanics calculations, molecular docking, virtual screening, and a combination of them as the hybrid methodologies. By relying on the recent advances in the computational methods, an opportunity emerged for them to be complementary or an alternative to the experimental methods in the field of biosensor design.

Ionic Strength Influences on Biofunctional Au-Decorated Microparticles for Enhanced Performance in Multiplexed Colorimetric Sensors

The rising development of biosensors offers a great potential for health, food, and environmental monitoring. However, in many colorimetric platforms, there is a performance limitation stemming from the tendency of traditional Au nanoparticles toward nonspecific aggregation in response to changing ionic strength (salt concentration). This work puts forward a new type of colorimetric aptamer-functionalized labeling of microparticles, which allows to leverage an increase in ionic strength as a positive driver of enhanced detection performance of analytical targets. The resulting device is a cost-effective, instrument-free, portable, and reliable aptasensor that serves as basis for the fabrication of universal paper-based colorimetric platforms with the capability of multiplex, multireplicates and provides quantitative colorimetric detection. A controlled fabrication process was demonstrated by keeping 90% of the signal obtained from the as-fabricated devices (n = 40) within ± 1 standard deviation (SD) (relative SD = 5.69%) and following a mesokurtic normal-like distribution (p = 0.385). We propose for the first time a salt-induced aggregation mechanism for highly stable multilayered label particles (ssDNA-PEI-Au-PS) as the basis of the detection scheme. The use of DNA aptamers as capture biomolecules and PEI as an encapsulating agent allows for a sensitive and highly specific colorimetric response. As a proof of concept, multiplexed detection of mercury (Hg²⁺) and arsenic (As³⁺) was demonstrated. In addition, we introduced a robust image analysis algorithm for testing zone segmentation and color signal quantification that allowed for analytical detection, reaching a limit of detection of 1 ppm for both targeted analytes, with enough evidence (p > 0.05) to prove the high specificity of the fabricated device versus a pool of possible interferent ions.

GO-amplified fluorescence polarization assay for high-sensitivity detection of aflatoxin B1 with low dosage aptamer probe

Aflatoxin B₁ (AFB₁) is the most toxic mycotoxin of the aflatoxins (AFs) and shows carcinogenic, teratogenic and mutagenic effects in humans and animals. AFB₁ is widely seen in cereal products such as rice and wheat. This research proposed a low-cost, high-sensitivity fluorescence polarization (FP) assay for detection of AFB₁ using aptamer biosensors based on graphene oxide (GO). The aptamers labelled with fluorescein amidite (FAM) were adsorbed on the surface of GO through π-π stacking and electrostatic interaction, thus forming aptamer/GO macromolecular complexes. Under these conditions, the local rotation of fluorophores was limited and the system had a high FP value. When there was AFB₁ in the system, aptamers were dissociated from the GO surface and combined with AFB₁ owing to their specificity to form aptamer/AFB₁ complexes. As a result, large changes were observed in the molecular weights of aptamers before, and after, the combination, therefore leading to the apparent changes in FP value. The results showed that when only 10 nM of aptamer was used, the changes in FP and the AFB₁ concentration had a favourable linear relationship within 0.05 to 5 nM of AFB₁, and the lowest detection limit (LOD) was 0.05 nM. In addition, the recoveries of rice sample extract ranged from 89.2% to 112%. The method is simple, highly sensitive, cost-efficient and shows potential application prospects.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Optimization of Aflatoxin B1 Aptasensing

Combination of aptamers with DNAzymes attracted intense attention for development of DNA-based biosensors for detection of mycotoxins. In the present study a combination of aflatoxin B1 specific aptamer and HRP- (horseradish peroxidase-) mimicking DNAzyme was optimized for detecting aflatoxin B1. Detecting approach is based on the binding affinity of aflatoxin B1 to its specific aptamer and conversion of substrate to a detectable colorimetric signal by a linked DNAzyme. Compared to conventional methods for aflatoxin B1 detection, DNA-based assay has the advantages of low cost, long-term stability, and rapid, simple, and user-friendly steps.