Local heating of human skin by millimeter waves: A kinetics study

Millimeter-wave Heating in vitro: Local Microscale Temperature Measurements Correlated to Heat Shock Cellular Response

OBJECTIVE

Cellular sensitivity to heat is highly variable depending on the cell line. The aim of this paper is to assess the cellular sensitivity of the A375 melanoma cell line to continuous (CW) millimeter-waves (MMW) induced heating at 58.4 GHz, between 37 C and 47 C C to get a deeper insight into optimization of thermal treatment of superficial skin cancer.

METHODS

Phosphorylation of heat shock protein 27 (HSP27) was mapped within an area of about 30 mm2 to visualize the variation of heat-induced cellular stress as a function of the distance from the waveguide aperture (MMW radiation source). A multiphysics computational approach was then adopted to yield both electromagnetic and thermal field distributions as well as corresponding specific absorption rate (SAR) and temperature elevation. Induced temperature rise was experimentally measured using a micro-thermocouple (TC).

RESULTS

Coupling of the incident electromagnetic (EM) field with TC leads was first characterized, and optimal TC placing was identified. HSP27 phosphorylation was induced at temperatures 41 C, and its level increases as a function of the thermal dose delivered, remaining mostly focused within 3 mm2.

CONCLUSION

Phosphorylation of HSP27 represents a valuable marker of cellular stress of A375 melanoma cells under MMW exposure, providing both quantitative and spatial information about the distribution of the thermal stress.

SIGNIFICANCE

These results may contribute to the design of thermal treatments of superficial melanoma through MMW-induced heating in the hyperthermic temperature range.

Steady state temperature rise in multilayered tissue due to arbitrary periodic SAR using finite difference FFT and transfer function method

Steady state (SS) and transient temperature-rise in tissue from radiofrequency exposure forms the underlying basis for limits in international exposure guidelines. Periodically pulsed or intermittent exposures form a special case of having both peak and average levels, producing temperature-rise oscillations in the SS. Presented here is a method for determining tissue temperature-rise for periodic specific absorption rate (SAR) modulation having arbitrary waveform. It involves the finite difference solution of a form of the Pennes Bioheat Transfer equation (BHTE) and uses the concept of the transfer function and the Fast Fourier Transform (FFT). The time-dependent BHTE is converted to a SS harmonic version by assuming that the time-dependent SAR waveform and tissue temperature can both be represented by Fourier series. The transfer function is obtained from solutions of the harmonic BHTE for an assumed SAR waveform consisting of periodic impulses. The temperature versus time response for an arbitrary periodic SAR waveform is obtained from the inverse FFT of the product of the transfer function and the FFT of the actual SAR waveform. This method takes advantage of existing FFT algorithms on most computational platforms and the ability to store the transfer function for later re-use. The transfer function varies slowly with harmonic number, allowing interpolation and extrapolation to reduce the computational effort. The method is highly efficient for the case where repeated temperature-rise calculations for parameter variations in the SAR waveform are sought. Examples are given for a narrow, circularly symmetric beam incident on a planar skin/fat/muscle model with rectangular, triangular and cosine-pulsed SAR modulation waveforms. Calculations of temperature-rise crest factor as a function of rectangular pulse duty factor and pulse repetition frequency for the same exposure/tissue model are also presented as an example of the versatility of the method.

The Lack of Toxic Effect of High-Power Short-Pulse 101 GHz Millimeter Waves on Healthy Mice

Irradiation of cancer cells by non-ionizing millimeter waves (MMW) causes increased cell mortality. We examined if MMW have toxic effects on healthy mice. To that end, the skin of healthy C57BL/6 mice was irradiated locally at the right flank with 101 GHz MMW in a pulsed (5-10 µs) regime using a free electron laser. Irradiation was performed in a dose-dependent manner, with 20-50 pulses and a power range of 0.5-1.5 kW. Physical, physiological, and pathological parameters as well as behavior were examined before and after irradiation. Our results showed that all parameters were within normal range for all experimental mice groups and for the control group. No significant changes were noted in the physical, physiological, or behavioral status of the mice following irradiation as compared with the control group. In addition, no significant changes were found in locomotor, exploratory behavior, or anxiety of the irradiated mice and no pathological changes were noted following the hematological and biochemical blood analysis. Our results indicate that irradiation of healthy mice with MMW does not cause any general toxic effects. Bioelectromagnetics. © 2020 Bioelectromagnetics Society.

Millimeter-wave pulsed heating in vitro: cell mortality and heat shock response

Millimeter wave (MMW)-induced heating represents a promising alternative for non-invasive hyperthermia of superficial skin cancer, such as melanoma. Pulsed MMW-induced heating of tumors allows for reaching high peak temperatures without overheating surrounding tissues. Herein, for the first time, we evaluate apoptotic and heat shock responses of melanoma cells exposed in vitro to continuous (CW) or pulsed-wave (PW) amplitude-modulated MMW at 58.4 GHz with the same average temperature rise. Using an ad hoc exposure system, we generated 90 min pulse train with 1.5 s pulse duration, period of 20 s, amplitude of 10 °C, and steady-state temperature at the level of cells of 49.2 °C. The activation of Caspase-3 and phosphorylation of HSP27 were investigated using fluorescence microscopy to monitor the spatial variation of cellular response. Our results demonstrate that, under the considered exposure conditions, Caspase-3 activation was almost 5 times greater following PW exposure compared to CW. The relationship between the PW-induced cellular response and SAR-dependent temperature rise was non-linear. Phosphorylation of HSP27 was 58% stronger for PW compared to CW. It exhibits a plateau for the peak temperature ranging from 47.7 to 49.2 °C. Our results provide an insight into understanding of the cellular response to MMW-induced pulsed heating.

Millimeter-Wave Heating in In Vitro Studies: Effect of Convection in Continuous and Pulse-Modulated Regimes

Shallow penetration of millimeter waves (MMW) and non-uniform illumination in in vitro experiments result in a non-uniform distribution of the specific absorption rate (SAR). These SAR gradients trigger convective currents in liquids affecting transient and steady-state temperature distributions. We analyzed the effect of convection on temperature dynamics during MMW exposure in continuous-wave (CW) and pulsed-wave (PW) amplitude-modulated regimes using micro-thermocouples. Temperature rise kinetics are characterized by the occurrence of a temperature peak that shifts to shorter times as the SAR of the MMW exposure increases and precedes initiation of convection in bulk. Furthermore, we demonstrate that the liquid volume impacts convection. Increasing the volume results in earlier triggering of convection and in a greater cooling rate after the end of the exposure. In PW regimes, convection strongly depends on the pulse duration that affects the heat pulse amplitude and cooling rate. The latter results in a change of the average temperature in PW regime. Bioelectromagnetics. 2019;40:553-568. © 2019 Bioelectromagnetics Society.

Model of Steady-state Temperature Rise in Multilayer Tissues Due to Narrow-beam Millimeter-wave Radiofrequency Field Exposure

The assessment of health effects due to localized exposures from radiofrequency fields is facilitated by characterizing the steady-state, surface temperature rise in tissue. A closed-form analytical model was developed that relates the steady-state, surface temperature rise in multilayer planar tissues as a function of the spatial-peak power density and beam dimensions of an incident millimeter wave. Model data was derived from finite-difference solutions of the Pennes bioheat transfer equation for both normal-incidence plane waves and for narrow, circularly symmetric beams with Gaussian intensity distribution on the surface. Monte Carlo techniques were employed by representing tissue layer thicknesses at different body sites as statistical distributions compiled from human data found in the literature. The finite-difference solutions were validated against analytical solutions of the bioheat equation for the plane wave case and against a narrow-beam solution performed using a commercial multiphysics simulation package. In both cases, agreement was within 1-2%. For a given frequency, the resulting analytical model has four input parameters, two of which are deterministic, describing the level of exposure (i.e., the spatial-peak power density and beam width). The remaining two are stochastic quantities, extracted from the Monte Carlo analyses. The analytical model is composed of relatively simple functions that can be programmed in a spreadsheet. Demonstration of the analytical model is provided in two examples: the calculation of spatial-peak power density vs. beam width that produces a predefined maximum steady-state surface temperature, and the performance evaluation of various proposed spatial-averaging areas for the incident power density.

Extremely high-frequency electromagnetic radiation enhances neutrophil response to particulate agonists

The growing use of extremely high-frequency electromagnetic radiation (EHF EMR) in information and communication technology and in biomedical applications has raised concerns regarding the potential biological impact of millimeter waves (MMWs). Here, we elucidated the effects of MMW radiation on neutrophil activation induced by opsonized zymosan or E. coli in whole blood ex vivo. After agonist addition to blood, two samples were prepared. A control sample was incubated at ambient conditions without any treatment, and a test sample was exposed to EHF EMR (32.9-39.6 GHz, 100 W/m² ). We used methods that allowed us to assess the functional status of neutrophils immediately after exposure: oxidant production levels were measured by luminol-dependent chemiluminescence, and morphofunctional changes to neutrophils were observed in blood smears. Results revealed that the response of neutrophils to both agonists was intensified if blood was exposed to MMW radiation for 15 min. Neutrophils were intact in both the control and irradiated samples if no agonist was added to blood before incubation. Similarly, exposing suspensions of isolated neutrophils in plasma to MMW radiation enhanced cell response to both zymosan and E. coli. Heating blood samples was shown to be the primary mechanism underlying enhanced EHF EMR-induced oxidant production by neutrophils in response to particulate agonists. Bioelectromagnetics. 39:144-155, 2018. © 2017 Wiley Periodicals, Inc.

Thermal Response of Human Skin to Microwave Energy: A Critical Review

This is a review/modeling study of heating of tissue by microwave energy in the frequency range from 3 GHz through the millimeter frequency range (30-300 GHz). The literature was reviewed to identify studies that reported RF-induced increases in skin temperature. A simple thermal model, based on a simplified form of Pennes' bioheat equation (BHTE), was developed, using parameter values taken from the literature with no further adjustment. The predictions of the model were in excellent agreement with available data. A parametric analysis of the model shows that there are two heating regimes with different dominant mechanisms of heat transfer. For small irradiated areas (less than about 0.5-1 cm in radius) the temperature increase at the skin surface is chiefly limited by conduction of heat into deeper tissue layers, while for larger irradiated areas, the steady-state temperature increase is limited by convective cooling by blood perfusion. The results support the use of this simple thermal model to aid in the development and evaluation of RF safety limits at frequencies above 3 GHz and for millimeter waves, particularly when the irradiated area of skin is small. However, very limited thermal response data are available, particularly for exposures lasting more than a few minutes to areas of skin larger than 1-2 cm in diameter. The paper concludes with comments about possible uses and limitations of thermal modeling for setting exposure limits in the considered frequency range.

Microscale temperature and SAR measurements in cell monolayer models exposed to millimeter waves

Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75 μm demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (> 10 min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400 μm) and time constant (0.6 s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10 μm) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 °C) using 25 μm TC. Bioelectromagnetics. 38:11-21, 2017. © 2016 Wiley Periodicals, Inc.

Parametric analysis of transient skin heating induced by terahertz radiation

This paper investigates the effect of relevant physical parameters on transient temperature elevation induced in human tissues by electromagnetic waves in the terahertz (THz) band. The problem is defined by assuming a plane wave, which, during a limited time interval, normally impinges on the surface of a 3-layer model of the human body, causing a thermal transient. The electromagnetic equations are solved analytically, while the thermal ones are handled according to the finite element method. A parametric analysis is performed with the aim of identifying the contribution of each parameter, showing that the properties of the first skin layer (except blood flow) play a major role in the computation of the maximum temperature rise for the considered exposure situation. Final results, obtained by combining all relevant parameters together, show that the deviation from the reference solution of the maximum temperature elevation in skin is included in the coverage intervals from -30% to +10% at 0.1 THz and from -33% to +18% at 1 THz (with 95% confidence level). These data allow bounding the possible temperature increase against the spread of tissue properties that could be reasonably used for dosimetric simulations.

The effect of a 94 GHz electromagnetic field on neuronal microtubules

Hardware that generates electromagnetic waves with wavelengths from 1 to 10 mm (millimeter waves, "MMW") is being used in a variety of applications, including high-speed data communication and medical devices. This raises both practical and fundamental issues concerning the interaction of MMW electromagnetic fields (EMF) with biological tissues. A 94 GHz EMF is of particular interest because a number of applications, such as active denial systems, rely on this specific frequency. Most of the energy associated with MMW radiation is absorbed in the skin and, for a 94 GHz field, the power penetration depth is shallow (≈0.4 mm). At sufficiently high energies, skin heating is expected to activate thermal pain receptors, leading to the perception of pain. In addition to this "thermal" mechanism of action, a number of "non-thermal" effects of MMW fields have been previously reported. Here, we investigated the influence of a 94 GHz EMF on the assembly/disassembly of neuronal microtubules in Xenopus spinal cord neurons. We reasoned that since microtubule array is regulated by a large number of intracellular signaling cascades, it may serve as an exquisitely sensitive reporter for the biochemical status of neuronal cytoplasm. We found that exposure to 94 GHz radiation increases the rate of microtubule assembly and that this effect can be entirely accounted for by the rapid EMF-elicited temperature jump. Our data are consistent with the notion that the cellular effects of a 94 GHz EMF are mediated entirely by cell heating.

Millimeter waves: acoustic and electromagnetic

This article is the presentation I gave at the D'Arsonval Award Ceremony on June 14, 2011 at the Bioelectromagnetics Society Annual Meeting in Halifax, Nova Scotia. It summarizes my research activities in acoustic and electromagnetic millimeter waves over the past 47 years. My earliest research involved acoustic millimeter waves, with a special interest in diagnostic ultrasound imaging and its safety. For the last 21 years my research expanded to include electromagnetic millimeter waves, with a special interest in the mechanisms underlying millimeter wave therapy. Millimeter wave therapy has been widely used in the former Soviet Union with great reported success for many diseases, but is virtually unknown to Western physicians. I and the very capable members of my laboratory were able to demonstrate that the local exposure of skin to low intensity millimeter waves caused the release of endogenous opioids, and the transport of these agents by blood flow to all parts of the body resulted in pain relief and other beneficial effects.

Effect of millimeter waves and cyclophosphamide on cytokine regulation

We have reported previously that millimeter waves (MMWs) protect T-cell functions from the toxic side effects of cyclophosphamide (CPA), an anticancer drug. Since the effect of MMWs has been reported to be mediated by endogenous opioids, the present study was undertaken to investigate the role of endogenous opioids in protection of T-cell functions by MMWs. The effect of MMWs (42.2 GHz, incident power density = 38 mW/cm²) was studied on CPA-induced suppression of cytokine release by T cells in the presence of selective opioid receptor antagonists (ORA). Production of cytokines was measured in CD4 T cells isolated from splenocytes. Treatment of mice with CPA suppressed the formation of Th1 cytokines (TNF-α, IFN-γ, and IL-2), shifting the overall balance toward Th2 (IL-4 and IL-5). MMW irradiation of CPA-treated groups up-regulated the production of Th1 cytokines suppressed by CPA. Treatment of the CPA+MMW group with selective kappa (κ) ORA further potentiated this effect of MMWs on Th1 cytokine production, whereas treatment with μ or δ ORA increased the imbalance of cytokine production in the Th2 direction. These results provide further evidence that endogenous opioids are involved in immunomodulation by MMWs.

Bioelectromagnetics, complex behaviour and psychotherapeutic potential

The brain is a complex non-linear dynamical system that is associated with a wide repertoire of behaviours. There is an ongoing debate as to whether low-intensity radio frequency (RF) bioelectromagnetic interactions induce a biological response. If they do, it is reasonable to expect that the interaction is non-linear. Contradictory reports are found in the literature and attempts to reproduce the subtle effects have often proved difficult. Researchers have already speculated that low-intensity RF radiation may offer therapeutic potential and millimetre-wave therapy is established in the countries of the former Soviet Union. A recent study using transgenic mice that exhibit Alzheimer's-like cognitive impairment shows that microwave radiation may possibly have therapeutic application. By using a highly dynamic stimulus and feedback it may be possible to augment the small effects that have been reported using static parameters. If a firm connection between low-intensity RF radiation and biological effects is established then the possibility arises for its psychotherapeutic application. Low intensity millimetre-wave and peripheral nervous system interactions also merit further investigation. Controlled RF exposure could be associated with quite novel characteristics and dynamics when compared to those associated with pharmacotherapy.

Millimeter wave effects on electrical responses of the sural nerve in vivo

Millimeter wave (MMW, 42.25 GHz)-induced changes in electrical activity of the murine sural nerve were studied in vivo using external electrode recordings. MMW were applied to the receptive field of the sural nerve in the hind paw. We found two types of responses of the sural nerve to MMW exposure. First, MMW exposure at the incident power density >/=45 mW/cm(2) inhibited the spontaneous electrical activity. Exposure with lower intensities (10-30 mW/cm(2)) produced no detectable changes in the firing rate. Second, the nerve responded to the cessation of MMW exposure with a transient increase in the firing rate. The effect lasted 20-40 s. The threshold intensity for this effect was 160 mW/cm(2). Radiant heat exposure reproduced only the inhibitory effect of MMW but not the transient excitatory response. Depletion of mast cells by compound 48/80 eliminated the transient response of the nerve. It was suggested that the cold sensitive fibers were responsible for the inhibitory effect of MMW and radiant heat exposures. However, the receptors and mechanisms involved in inducing the transient response to MMW exposure are not clear. The hypothesis of mast cell involvement was discussed.

Effect of Millimeter Waves on Cyclophosphamide Induced NF-κB

Antiapoptotic activity of NF-Kappa B (NF-kappaB) in tumors contributes to acquisition of resistance to chemotherapy. The effect of millimeter waves (MMWs) on NF-kappaB activation induced by cyclophosphamide (CPA) was studied in the spleen of mice. CPA, an anticancer drug, caused a marked increase (58.9-fold) in NF-kappaB DNA-binding activity as compared to the control group. No significant enhancement in NF-kappaB activity (0.51-fold) was observed when the CPA group was also irradiated with MMWs. These results suggest that treatment with MMWs can inhibit activation of NF-kappaB induced by chemotherapeutic drugs.

Analytical analysis of the Pennes bioheat transfer equation with sinusoidal heat flux condition on skin surface

This study focuses on the effect of the temperature response of a semi-infinite biological tissue due to a sinusoidal heat flux at the skin. The Pennes bioheat transfer equation such as rho(t)c(t)( partial differentialT/ partial differentialt)+W(b)c(b)(T-T(a))=k partial differential(2)T/ partial differentialx(2) with the oscillatory heat flux boundary condition such as q(0,t)=q(0)e(iomegat) was investigated. By using the Laplace transform, the analytical solution of the Pennes bioheat transfer equation with surface sinusoidal heating condition is found. This analytical expression is suitable for describing the transient temperature response of tissue for the whole time domain from the starting periodic oscillation to the final steady periodic oscillation. The results show that the temperature oscillation due to the sinusoidal heating on the skin surface is unstable in the initial period. Further, it is unavailable to predict the blood perfusion rate via the phase shifting between the surface heat flux and the surface temperature. Moreover, the lower frequency of sinusoidal heat flux on the skin surface induces a more sensitive phase shift response to the blood perfusion rate change, but extends the beginning time of sampling because of the avoidance of the unavailable first cyclic oscillation.

Effect of millimeter wave irradiation on tumor metastasis

One of the major side effects of chemotherapy in cancer treatment is that it can enhance tumor metastasis due to suppression of natural killer (NK) cell activity. The present study was undertaken to examine whether millimeter electromagnetic waves (MMWs) irradiation (42.2 GHz) can inhibit tumor metastasis enhanced by cyclophosphamide (CPA), an anticancer drug. MMWs were produced with a Russian-made YAV-1 generator. Peak SAR and incident power density were measured as 730 +/- 100 W/kg and 36.5 +/- 5 mW/cm(2), respectively. Tumor metastasis was evaluated in C57BL/6 mice, an experimental murine model commonly used for metastatic melanoma. The animals were divided into 5 groups, 10 animals per group. The first group was not given any treatment. The second group was irradiated on the nasal area with MMWs for 30 min. The third group served as a sham control for group 2. The fourth group was given CPA (150 mg/kg body weight, ip) before irradiation. The fifth group served as a sham control for group 4. On day 2, all animals were injected, through a tail vein, with B16F10 melanoma cells, a tumor cell line syngeneic to C57BL/6 mice. Tumor colonies in lungs were counted 2 weeks following inoculation. CPA caused a marked enhancement in tumor metastases (fivefold), which was significantly reduced when CPA-treated animals were irradiated with MMWs. Millimeter waves also increased NK cell activity suppressed by CPA, suggesting that a reduction in tumor metastasis by MMWs is mediated through activation of NK cells.

Millimeter wave induced reversible externalization of phosphatidylserine molecules in cells exposed in vitro

In vitro exposure of refrigerated samples (4 degrees C) of anti-coagulated blood with millimeter waves (MMWs) at incident power densities (IPDs) between 0.55 and 1.23 W/cm2 has been found to induce clot formation. We found a small but statistically significant change in clot size with increasing IPD value. MMW exposure of blood samples starting at room temperature (22 degrees C) did not induce blood coagulation; neither did conventional heating at temperatures up to 40 degrees C. Since cell-free plasma did not clot upon MMW exposure, the role of blood cells was particularly analyzed. Experiments on various mixtures of blood cells with plasma revealed an important role of red blood cells (RBC) in the coagulation process. Plasma coagulation also developed within the MMW beam above dense keratinocyte (HaCaT) monolayers suggesting it lacked cell-type specificity. We hypothesized that alteration of the membrane surface in exposed cells might be responsible for the circumscribed coagulation. The thrombogenic role of externalized phosphatidylserine (PS) molecules is well known. Therefore, we carried out experiments for immunolabeling PS molecules with fluorescein isothiocyanate (FITC)-conjugated Annexin V on exposed cells. Fluorescence microscopy of the adherent human keratinocytes (HaCaT) and murine melanoma cells (B16F10) showed that MMW exposure at an IPD of 1.23 W/cm2 is capable of inducing reversible externalization of PS molecules in cells within the beam area without detectable membrane damage. Nonadherent Jurkat cells exposed to MMW at an IPD of 34.5 mW/cm2 also showed reversible PS externalization with flow cytometry, whether the cell temperature was held constant or permitted to rise. These results suggest that certain biological effects induced by MMWs could be initiated by membrane changes in exposed cells.

Optimization of self-reference thermometry using complex field estimation

Referenceless, or self-reference, thermometry is a technique for mapping temperature differences in the region of interest (ROI) using the baseline phase estimated by extrapolating the field in the surrounding region for estimation (RFE) and subtracting the estimated baseline from the measured field. In the present work a self-reference technique based on complex field estimation using 2D polynomials comprising complex-valued coefficients was proposed and optimized. Numerical simulations with a Gaussian-profiled phase distribution demonstrated that the ROI radius had to be 2.3-2.5 times the standard deviation (SD) of the Gaussian function in order to keep the error below 8% of the peak phase change. The area ratio between the ROI and the RFE had to be larger than 2.0 to maintain the error level. Based on the simulations, and phantom and volunteer experiments, the complex-based method with independently optimized polynomial orders for the two spatial dimensions was compared with the phase-based method using the similar-order optimization strategy. The complex-based method appeared to be useful when phase unwrapping was not removed. Otherwise, the phase-based method yielded equivalent results with less polynomial orders.

Numerical dosimetry for cells under millimetre-wave irradiation using Petri dish exposure set-ups

We carried out a numerical dosimetry study for in vitro experiments on millimetre-wave (MMW) biological effects on cells. The cell layers are cultured in 35 mm Petri dishes placed in the far-field region of a rectangular horn irradiator generating a 50.0 GHz continuous sinusoidal MMW. The finite-difference time-domain (FDTD) method and the second-order approximation of the absorbing boundary conditions (ABCs) are applied in calculating the specific absorption rate (SAR) in the cells. The 0.125 mm and 0.25 mm voxel models of the Petri dish are used. The permittivity and the conductivity of the cells and those of the culture medium are obtained with Debye's dispersion equation. We measured the power pattern of the irradiator using the plane wave expansion (PWE) method, and developed a program module to calculate the FDTD-compatible incident field from the irradiator, whose position and orientation are adjustable. The MMW multiple reflection between the Petri dish and the irradiator is evaluated before being neglected. For the single-dish, double-dish and quadruple-dish exposure set-ups, the SAR intensity and the SAR uniformity are analysed and compared. The meniscus effect on the SAR distribution over the cell layer is evaluated for the single-dish set-up. The influence of the Petri dish interaction on the SAR distribution is examined for the double-dish and quadruple-dish set-ups.

Effect of millimeter waves on natural killer cell activation

Millimeter wave therapy (MMWT) is being widely used for the treatment of many diseases in Russia and other East European countries. MMWT has been reported to reduce the toxic effects of chemotherapy on the immune system. The present study was undertaken to investigate whether millimeter waves (MMWs) can modulate the effect of cyclophosphamide (CPA), an anticancer drug, on natural killer (NK) cell activity. NK cells play an important role in the antitumor response. MMWs were produced with a Russian-made YAV-1 generator. The device produced modulated 42.2 +/- 0.2 GHz radiation through a 10 x 20 mm rectangular output horn. Mice, restrained in plastic tubes, were irradiated on the nasal area. Peak SAR at the skin surface and peak incident power density were measured as 622 +/- 100 W/kg and 31 +/- 5 mW/cm2, respectively. The maximum temperature elevation, measured at the end of 30 min, was 1 degrees C. The animals, restrained in plastic tubes, were irradiated on the nasal area. CPA injection (100 mg/kg) was given intraperitoneally on the second day of 3-days exposure to MMWs. All the irradiation procedures were performed in a blinded manner. NK cell activation and cytotoxicity were measured after 2, 5, and 7 days following CPA injection. Flow cytometry of NK cells showed that CPA treatment caused a marked enhancement in NK cell activation. The level of CD69 expression, which represents a functional triggering molecule on activated NK cells, was increased in the CPA group at all the time points tested as compared to untreated mice. However, the most enhancement in CD69 expression was observed on day 7. A significant increase in TNF-alpha level was also observed on day 7 following CPA administration. On the other hand, CPA caused a suppression of the cytolytic activity of NK cells. MMW irradiation of the CPA treated groups resulted in further enhancement of CD69 expression on NK cells, as well as in production of TNF-alpha. Furthermore, MMW irradiation restored CPA induced suppression of the cytolytic activity of NK cells. Our results show that MMW irradiation at 42.2 GHz can up-regulate NK cell functions.

Combined millimeter wave and cyclophosphamide therapy of an experimental murine melanoma

The objective of the present studies was to investigate whether millimeter wave (MMW) therapy can increase the efficacy of cyclophosphamide (CPA), a commonly used anti-cancer drug. The effect of combined MMW-CPA treatment on melanoma growth was compared to CPA treatment alone in a murine model. MMWs were produced with a Russian made YAV-1 generator. The device produced 42.2 +/- 0.2 GHz modulated wave radiation through a 10 x 20 mm rectangular output horn. The animals, SKH-1 hairless female mice, were irradiated on the nasal area. Peak SAR and incident power density were measured as 730 +/- 100 W/kg and 36.5 +/- 5 mW/cm2, respectively. The maximum skin surface temperature elevation measured at the end of 30 min irradiation was 1.5 degrees C. B16F10 melanoma cells (0.2 x 10(6)) were implanted subcutaneously into the left flank of mice on day 1 of the experiment. On days 4-8, CPA was administered intraperitoneally (30 mg/kg/day). MMW irradiation was applied concurrently with, prior to or following CPA administration. A significant reduction (P < .05) in tumor growth was observed with CPA treatment, but MMW irradiation did not provide additional therapeutic benefit as compared to CPA alone. Similar results were obtained when MMW irradiation was applied both prior to and following CPA treatment.

Local heating of human skin by millimeter waves: Effect of blood flow

We investigated the influence of blood perfusion on local heating of the forearm and middle finger skin following 42.25 GHz exposure with an open ended waveguide (WG) and with a YAV mm wave therapeutic device. Both sources had bell-shaped distributions of the incident power density (IPD) with peak intensities of 208 and 55 mW/cm(2), respectively. Blood perfusion was changed in two ways: by blood flow occlusion and by externally applied vasodilator (nonivamide/nicoboxil) cream to the skin. For thermal modeling, we used the bioheat transfer equation (BHTE) and the hybrid bioheat equation (HBHE) which combines the BHTE and the scalar effective thermal conductivity equation (ETCE). Under normal conditions with the 208 mW/cm(2) exposure, the cutaneous temperature elevation (DeltaT) in the finger (2.5 +/- 0.3 degrees C) having higher blood flow was notably smaller than the cutaneous DeltaT in the forearm (4.7 +/- 0.4 degrees C). However, heating of the forearm and finger skin with blood flow occluded was the same, indicating that the thermal conductivity of tissue in the absence of blood flow at both locations was also the same. The BHTE accurately predicted local hyperthermia in the forearm only at low blood flow. The HBHE made accurate predictions at both low and high perfusion rates. The relationship between blood flow and the effective thermal conductivity (k(eff)) was found to be linear. The heat dissipating effect of higher perfusion was mostly due to an apparent increase in k(eff). It was shown that mm wave exposure could result in steady state heating of tissue layers located much deeper than the penetration depth (0.56 mm). The surface DeltaT and heat penetration into tissue increased with enlarging the irradiating beam area and with increasing exposure duration. Thus, mm waves at sufficient intensities could thermally affect thermo-sensitive structures located in the skin and underlying tissue.