Luminol chemiluminescence catalysed by colloidal platinum nanoparticles

Sonochemically synthesized mesoporous cobalt oxide nanoparticles for luminol-enhanced chemiluminescence sensing

In recent years, mesoporous cobalt oxides have attracted more attention due to their exceptional physical and chemical properties and their important applications in various fields. The synthesis of cobalt oxides of various sizes, morphologies, and porosity is still a challenging process. In this report, mesoporous Co₃O₄NPs with different porosity were synthesized through facile, one-step, and cost-effective routes, without using any complicated materials or instruments, via the sonochemical process. X-ray powder diffraction (XRD), BET, and transmission electron microscopy (TEM) were used to characterize the as-synthesized NPs. XRD technique was used to determine the crystal structure and phase of the NPs, BET to describe the porous nature of the NPs, and TEM to investigate the structure and morphology of the NPs. Next, the effect of as-synthesized Co₃O₄NPs as a catalyst for the luminol-H₂O₂chemiluminescence system was studied. Co₃O₄NPs were chosen since they have nanoscale size, high specific surface area, and mesoporous nature. Therefore, these NPs can form more active sites and thus show unique catalytic activity than common ionic catalysts such as Co²⁺, Fe³⁺, Cu²⁺used in the luminol-H₂O₂CL system. Finally, this system was used to detect and measure H₂O₂and glucose under optimal conditions. A good linear relationship was observed between the chemiluminescence intensity of the designed system and the concentration of H₂O₂and glucose. A linear range like 0.25-10 pM for H₂O₂and 1-30 nM for glucose was obtained. The excellent LOD of the proposed method for measuring H₂O₂was about 0.07 pM, and for measuring glucose was about 0.14 nM.

Laser desorption/ionization mass spectrometry of L-thyroxine (T4) using combi-matrix of α-cyano-4-hydroxycinnamic acid (CHCA) and graphene

An optimal combi-matrix for MALDI-TOF mass spectrometry was presented for the analysis of L-thyroxine (T4) in human serum. For the selection of the optimal combi-matrix, several kinds of combi-matrices were prepared by mixing the conventional organic matrix of CHCA with nanomaterials, such as graphene, carbon nanotubes, nanoparticles of Pt and TiO2. In order to select the optimal combi-matrix, the absorption at the wavelength of laser radiation (337 nm) for the ionization of sample was estimated using UV–Vis spectrometry. And, the heat absorption properties of these combi-matrices were also analyzed using differential scanning calorimetry (DSC), such as onset temperature and fusion enthalpy. In the case of the combi-matrix of CHCA and graphene, the onset temperature and fusion enthalpy were observed to be lower than those of CHCA, which represented the enhanced transfer of heat to the analyte in comparison with CHCA. From the analysis of optical and thermal properties, the combi-matrix of CHCA and graphene was selected to be an optimal combination for the transfer of laser energy during MALDI-TOF mass spectrometry. The feasibility of the combi-matrix composed of CHCA and graphene was demonstrated for the analysis of T4 molecules using MALDI-TOF mass spectrometry. The combi-matrix of CHCA and graphene was estimated to have an improved limit of detection and a wider detection range in comparison with other kinds of combi-matrices. Finally, the MALDI-TOF MS results of T4 analysis using combi-matrix were statistically compared with those of the conventional immunoassay.

A sensitive biosensor for glucose determination based on the unique catalytic chemiluminescence of sodium molybdate

Chemiluminescent (CL) reaction between hydrogen peroxide (H₂O₂) and luminol was dramatically enhanced by sodium molybdate (Na₂MoO₄) for 284-fold. CL mechanism investigation indicated that Na₂MoO₄ increased the production of hydroxyl radical (•OH) and superoxide anion (•O₂^-) in the H₂O₂-luminol system, which could attribute to the enhanced-CL intensity and gave us new insights into the CL-enhanced property of Na₂MoO₄. The CL intensity of Na₂MoO₄-H₂O₂-luminol system increased with the concentration of H₂O₂, based on which, a convenient and sensitive CL determination method could be developed for H₂O₂ in the concentration ranging from 0.5 to 60 μmol/L, with a detection limit of 0.25 μmol/L. Combining with glucose oxidase, the Na₂MoO₄-H₂O₂-luminol system could also be applied for glucose detection. Glucose in human serum has been successfully detected with satisfied recoveries in the range of 96.7 % to 105.4 %.

Natural catalyst for Luminol chemiluminesence - Application to validate peroxide levels in commercial hair dyes

Herein, we report hydrothermally treated green leaves (Moringa Oleifera) extract exploited as an efficient and highly-sensitive catalyst to catalyse the Chemiluminescence (CL) reaction of luminol. In the absence of enhancer, this green and hydrothermally treated catalyst (GHT) was found to significantly enhance the CL intensity about 3.5 fold as compared to the traditionally used K₃ Fe(CN)₆ catalyst. The structure and surface morphology of the catalyst was elucidated by XPS, SEM, XRD and Raman spectroscopy. The synergistic effect of the catalyst in the CL reaction was systematically investigated in the presence of hydrogen peroxide using UV Visible and chemiluminesence spectroscopy. Studies show that the sensitivity of the catalyst could be amplified by adjusting several parameters such as pH of the medium, concentrations of the base and luminol. The sensitivity of the novel-type catalyst was examined through the validation of hydrogen peroxide levels in the commercial hair dye samples. Remarkably, the catalyst displayed ultra-sensitivity to hydrogen peroxide as the limit of detection (LOD) of H₂ O₂ using this catalyst is determined to be 0.02 μM under optimized conditions. In general, the proposed inexpensive, eco-friendly, and non-toxic catalyst could enable the determination of the hydrogen peroxide for diverse analytical applications.

Detection of ascorbic acid based on its quenching effect on luminol-artemisinin chemiluminescence

We find that luminol can react with artemisinin (ART) to produce chemiluminescence (CL) in the absence of a catalyst and ascorbic acid (AA) can quench luminol-ART CL. Based on its efficient inhibition effect on luminol-ART CL, a new AA detection method is established. The calibration curve for the determination of AA is in the linear range of 5 × 10^-7 M to 1 × 10^-4 M with a detection limit of 50 nM, which is more sensitive than many other reported methods. This CL approach was utilized to detect AA in vitamin C tablets by applying the standard addition method, and the recoveries of 104.0%, 96.8% and 103.4% were obtained, respectively, at concentrations of 1 μM, 5 μM and 10 μM with a RSD value of less than 3.6%. This developed method for AA assay is distinguished by its fastness, reproducibility, easy operation and good selectivity.

Cationic liposome-triggered luminol chemiluminescence reaction and its applications

Liposomes are spherical phospholipid bilayer vesicles. In the present study, we found that cationic liposomes made by (2,3-dioleoyloxy-propyl)-trimethylammonium (DOTAP) could enhance the luminol-H₂O₂ chemiluminescence (CL) reaction. Mechanism studies showed that the positive charge on the surface of liposomes plays an important role in the CL process. We speculated that the cationic liposomes with quaternary ammonium groups on the surface may be capable of catalyzing the decomposition of H₂O₂ leading to the formation of oxygen-related free radicals including ˙OH, ¹O₂, and O₂˙^-. The luminol anions tend to move close to the surface of the cationic liposomes and then to be oxidized by the oxidizing radical species which may be around the surface of cationic liposomes forming excited-state 3-aminophthalate* (3-APA*). When the 3-APA* returns to the ground state, an enhanced CL is observed. In addition, the single-strand DNA (ssDNA) showed a significant inhibition effect on the proposed CL reaction. The CL intensity decreased linearly with an increasing amount of DNA from 0.05 to 2 pmol. We assumed that the binding of ssDNA with cationic liposomes would neutralize the positive charge on the surface of liposomes and inhibit the catalytic activity of DOTAP cationic liposomes. Based on the ssDNA-inhibited luminol-H₂O₂-cationic liposome CL reaction, simple label-free CL sensing platforms were developed for the detection of sequence-specific DNA related to the hepatitis B virus (HBV) gene and for the detection of ATP (as a model analyte) using an anti-ATP aptamer as the recognition element.

Ultrasound-Enhanced Chemiluminescence for Bioimaging

Tissue imaging has emerged as an important aspect of theragnosis. It is essential not only to evaluate the degree of the disease and thus provide appropriate treatments, but also to monitor the delivery of administered drugs and the subsequent recovery of target tissues. Several techniques including magnetic resonance imaging (MRI), computational tomography (CT), acoustic tomography (AT), biofluorescence (BF) and chemiluminescence (CL), have been developed to reconstruct three-dimensional images of tissues. While imaging has been achieved with adequate spatial resolution for shallow depths, challenges still remain for imaging deep tissues. Energy loss is usually observed when using a magnetic field or traditional ultrasound (US), which leads to a need for more powerful energy input. This may subsequently result in tissue damage. CT requires exposure to radiation and a high dose of contrast agent to be administered for imaging. The BF technique, meanwhile, is affected by strong scattering of light and autofluorescence of tissues. The CL is a more selective and sensitive method as stable luminophores are produced from physiochemical reactions, e.g. with reactive oxygen species. Development of near infrared-emitting luminophores also bring potential for application of CL in deep tissues and whole animal studies. However, traditional CL imaging requires an enhancer to increase the intensity of low-level light emissions, while reducing the scattering of emitted light through turbid tissue environment. There has been interest in the use of focused ultrasound (FUS), which can allow acoustic waves to propagate within tissues and modulate chemiluminescence signals. While light scattering is decreased, the spatial resolution is increased with the assistance of US. In this review, chemiluminescence detection in deep tissues with assistance of FUS will be highlighted to discuss its potential in deep tissue imaging.

Pt NPs catalyzed chemiluminescence method for Hg2+ detection based on a flow injection system

Establishing a simple and accurate method for Hg²⁺ detection is of great importance for the environment and human health. In this work, platinum nanoparticles (Pt NPs) with different capped agents and morphologies were synthesized. It was found that Pt NPs exhibited peroxidase-like activity that can catalyze the chemiluminescence (CL) of the luminol system without H₂ O₂ . The most intensive CL signals were obtained by using PVP-capped Pt NPs as catalysis. Based on the fact that Hg²⁺ could further enhance the CL intensity in the Pt NPs-luminol CL system, a Pt NPs-catalyzed CL method based on a flow injection system is developed for the sensitive analysis of Hg²⁺ . When the concentration of Hg²⁺ in the system increases, the CL intensity would together increase, thereby achieving sensitive Hg²⁺ detection. The limit of detection (LOD) was calculated to be 8.6 nM. This developed method provides a simple and rapid approach for the sensitive detection of Hg²⁺ and shows great promise for applications in other complex systems.

In Situ Generation of Prussian Blue with Potassium Ferrocyanide to Improve the Sensitivity of Chemiluminescence Immunoassay Using Magnetic Nanoparticles as Label

Using magnetic nanoparticles (MNPs) as a label in immunoassay (IA) possesses advantages such as high specific surface area, simple modification process. However, the catalytic activity of MNPs is low, which limits their applications in IA. The present study found it interesting that potassium ferrocyanide reacts with MNPs, leading to the in situ generation of Prussian blue. The produced Prussian blue shows high catalytic activity on a luminol chemiluminescent (CL) reaction. Therefore, a simple and sensitive immunoassay for rabbit IgG (rIgG) as model analyte using MNPs as label was developed. The CL intensity had a linear increase with the concentration of rIgG that ranged from 0.625 to 20 ng mL^-1. The limit of detection was calculated to be 0.59 ng mL^-1. In addition, the applicability of this method was evaluated using the standard addition method. The recovery ranged from 80.0% to 115.0%. What's more, the proposed CLIA method based on in situ generation of Prussian blue with MNPs was also applied to the detection of carcinoembryonic antigen (CEA) and hepatitis B virus (HBV)-related sequence-specific DNA. The LOD for the detection of CEA and sequence-specific DNA was estimated to be 0.28 ng mL^-1 and 0.044 pmol, respectively.

Quenching of Luminol Fluorescence at Nano-Bio Interface: Towards the Development of an Efficient Energy Transfer System

Surface modified colloidal gold (Au) and silver (Ag) nanoparticles (NPs) were used as efficient quenchers of luminol (LH₂) fluorescence either in homogeneous aqueous medium or its noncovalent assembly with bovine serum albumin (BSA). The mechanism as well as the extent of fluorescence quenching was found to be strongly dependent on the nature of the nanoparticles. While simple static type fluorescence quenching mechanism was perceived with AuNP, a more complex protocol involving quenching sphere model was envisaged for AgNP quenching. Nevertheless, the magnitude of Stern-Volmer (SV) quenching constant (K_SV ~ 10⁸-10¹⁰ M^-1) was calculated to be ca. 10⁴ times more for surface quoted NPs in comparison with BSA-NP bioconjugates system. On the other hand, a highly efficient (E ≈ 95%) energy transfer (ET) process was predicted for LH₂ captured in the hydrophobic assembly with BSA in presence of AgNP as an acceptor. The ET efficiency is critically dependent on the concentration of BSA and nicely correlated with the extent of NP surface coverage. However, fluorescence quenching on AuNP surface is relatively less responsive towards protein concentration, primarily due to the difference in surface activity as well as the mode of interaction of the protein with NPs. Graphical Abstract Energy transfer from excited luminol to metal nanoparticles is strongly modulated in presence of serum albumins.

Platinum nanoparticles in nanobiomedicine

Oxidative stress-dependent inflammatory diseases represent a major concern for the population's health worldwide. Biocompatible nanomaterials with enzymatic properties could play a crucial role in the treatment of such pathologies. In this respect, platinum nanoparticles (PtNPs) are promising candidates, showing remarkable catalytic activity, able to reduce the intracellular reactive oxygen species (ROS) levels and impair the downstream pathways leading to inflammation. This review reports a critical overview of the growing evidence revealing the anti-inflammatory ability of PtNPs and their potential applications in nanomedicine. It provides a detailed description of the wide variety of synthetic methods recently developed, with particular attention to the aspects influencing biocompatibility. Special attention has been paid to the studies describing the toxicological profile of PtNPs with an attempt to draw critical conclusions. The emerging picture suggests that the material per se is not causing cytotoxicity, while other physicochemical features related to the synthesis and surface functionalization may play a crucial role in determining the observed impairment of cellular functions. The enzymatic activity of PtNPs is also summarized, analyzing their action against ROS produced by pathological conditions within the cells. In particular, we extensively discuss the potential of these properties in nanomedicine to down-regulate inflammatory pathways or to be employed as diagnostic tools with colorimetric readout. A brief overview of other biomedical applications of nanoplatinum is also presented.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Highly Efficient Intramolecular Electrochemiluminescence Energy Transfer for Ultrasensitive Bioanalysis of Aflatoxin M1

The intermolecular electrochemiluminescence resonance energy transfer (ECL-RET) between luminol and Ru(bpy)₃²⁺ was studied extensively to achieve the sensitive bioanalysis owing to the perfect spectral overlap of the donor and acceptor, but it still suffers from the challenging issue of low energy-transfer efficiency. The intramolecular ECL-RET towards the novel ECL compound containing the donor of luminol and the acceptor of Ru(bpy)₂ (mcpbpy)²⁺ (Lum-Ru) was designed and investigated. With the high-efficient ECL-RET in one molecule, the highly intense ECL signal of Lum-Ru was obtained owing to the short path of energy transmission and less energy loss between luminol and Ru(bpy)₂ (mcpbpy)²⁺ . Lum-Ru was further applied to construct a signal-off electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of a harsh carcinogen of Aflatoxin M1 (AFM1). This sensing platform also provides a significant boost for the trace detection of other biomolecules in clinical analysis.

Simultaneous Determination of Size and Quantification of Gold Nanoparticles by Direct Coupling Thin layer Chromatography with Catalyzed Luminol Chemiluminescence

The increasing use of metal-based nanoparticle products has raised concerns in particular for the aquatic environment and thus the quantification of such nanomaterials released from products should be determined to assess their environmental risks. In this study, a simple, rapid and sensitive method for the determination of size and mass concentration of gold nanoparticles (AuNPs) in aqueous suspension was established by direct coupling of thin layer chromatography (TLC) with catalyzed luminol-H2O2 chemiluminescence (CL) detection. For this purpose, a moving stage was constructed to scan the chemiluminescence signal from TLC separated AuNPs. The proposed TLC-CL method allows the quantification of differently sized AuNPs (13 nm, 41 nm and 100 nm) contained in a mixture. Various experimental parameters affecting the characterization of AuNPs, such as the concentration of H2O2, the concentration and pH of the luminol solution, and the size of the spectrometer aperture were investigated. Under optimal conditions, the detection limits for AuNP size fractions of 13 nm, 41 nm and 100 nm were 38.4 μg L(-1), 35.9 μg L(-1) and 39.6 μg L(-1), with repeatabilities (RSD, n = 7) of 7.3%, 6.9% and 8.1% respectively for 10 mg L(-1) samples. The proposed method was successfully applied to the characterization of AuNP size and concentration in aqueous test samples.

Fabrication and characterization of Cu(OH)2/CuO nanowires as a novel sensitivity enhancer of the luminol–H2O2chemiluminescence system: determination of cysteine in human plasma

Cu(OH)₂/CuO nanowires as a sensitivity enhancer in luminol–H₂O₂chemiluminescence system and its application for the determination of cysteine.

Switch-on fluorescence scheme for antibiotics based on a magnetic composite probe with aptamer and hemin/G-quadruplex coimmobilized nano-Pt-luminol as signal tracer

A selective and facile fluorescence "switch-on" scheme is developed to detect antibiotics residues in food, using chloramphenicol (CAP) as model, based on a novel magnetic aptamer probe (aptamer-Pt-luminol nanocomposite labeled with hemin/G-quadruplex). Firstly, the composite probe is prepared through the immuno-reactions between the capture beads (anti-dsDNA antibody labeled on magnetic Dynabeads) and the nanotracer (nano-Pt-luminol labeled with double-strand aptamer, as ds-Apt, and hemin/G-quadruplex). When the composite probe is mixed with CAP, the aptamer preferentially reacted with CAP to decompose the double-strand aptamer to ssDNA, which cannot be recognized by the anti-dsDNA antibody on the capture probes. Thus, after magnetic separation, the nanotracer can be released into the supernatant. Because the hemin/G-quadruplex and PtNPs in nanotracer can catalyze luminol-H2O2 system to emit fluorescence. Thus a dual-amplified "switch-on" signal appeared, of which intensity is proportional to the concentration of CAP between 0.001 and 100ng mL(-1) with detection limit of 0.0005ng mL(-1) (S/N=3). Besides, our method has good selectivity and was employed for CAP detection in real milk samples. The results agree well with those from conventional gas chromatograph-mass spectrometer (GC-MS). The switch-on signal is produced by one-step substitution reaction between aptamer in nanotracer and target. When the analyte is changed, the probe can be refabricated only by changing the corresponding aptamer. Thus, all features above prove our strategy to be a facile, feasible and selective method in antibiotics screening for food safety.

The chemiluminescence determination of 2-chloroethyl ethyl sulfide using luminol-AgNO3-silver nanoparticles system

A highly sensitive chemiluminescence (CL) method for the determination of 2-chloroethyl ethyl sulfide (2-CEES) was presented. It was found that 2-chloroethyl ethyl sulfide (2-CEES) could inhibit the CL of the luminol-AgNO3 system in the presence of silver nanoparticles in alkaline solution, which made it applicable for determination of 2-CEES. The presented method is simple, convenient, rapid and sensitive. Under the optimized conditions, the calibration curve was linear in the range of 0.0001-1ngmL(-1), with the correlation coefficient of 0.992; while the limit of detection (LOD), based on signal-to-noise ratio (S/N) of 3, was 6×10(-6)ngmL(-1). Also, the relative standard deviation (RSD, n=5) for determination of 2-CEES (0.50ngmL(-1)) was 3.1%. The method was successfully applied for the determination of 2-CEES in environmental aqueous samples.

Synergistic catalysis by gold nanoparticles and metal ions for enhanced chemiluminescence

The first report of individual and synergistic roles of alkali metal ions and gold nanoparticles in the enhancement of luminol-Urea–H₂O₂ chemiluminescence. A maximum of 600% increase over control was evident for NaCl in synergy with gold nanoparticles.

Luminol chemiluminescence enhanced by copper nanoclusters and its analytical application

It was found that Cu nanoclusters could enhance the chemiluminescence (CL) emission from the luminol–hydrogen peroxide system in an alkaline medium.

A novel luminol chemiluminescent method catalyzed by silver/gold alloy nanoparticles for determination of anticancer drug flutamide

It was found that silver/gold alloy nanoparticles enhance the chemiluminescence (CL) of the luminol-H2O2 system in alkaline solution. The studies of UV-Vis spectra, CL spectra, effects of concentrations luminol, hydrogen peroxide and silver/gold alloy nanoparticles solutions were carried out to explore the CL enhancement mechanism. Flutamide was found to quench the CL signals of the luminol-H2O2 reaction catalyzed by silver/gold alloy nanoparticles, which made it applicable for the determination of flutamide. Under the optimum conditions, the CL intensity is proportional to the concentration of the flutamide in solution over the range 5.0 × 10(-7) to 1.0 × 10(-4)mol L(-1). Detection limit was obtained 1.2 × 10(-8)mol L(-1)and the relative standard deviation (RSD) γ5%. This work is introduced as a new method for the determination of flutamide in commercial tablets. Box-Behnken experimental design is applied to investigate and validate the CL measurement parameters.

Chemiluminescence microfluidic system of gold nanoparticles enhanced luminol-silver nitrate for the determination of vitamin B12

A rapid and sensitive chemiluminescence (CL) system coupled with a microfluidic chip has been presented to determine vitamin B12 (VB12) based on the reaction of luminol and silver nitrate (AgNO(3)) in the presence of gold nanoparticles (AuNPs). A microfluidic chip was fabricated by a soft-lithographic procedure using polydimethyl siloxane (PDMS) having four inlets and one outlet with a 200 μm wide, 250 μm deep, and 100 mm long microchannel. Ag(+) was used as a chemiluminogenic oxidant in this CL reaction which oxidized luminol to produce strong CL signal in the presence of AuNPs. Luminol reacted with AgNO(3) under the catalysis of AuNPs to produce luminol radicals which reacted with dissolved oxygen and emitted CL light. The proposed CL system was applied to determine the amount of VB12 in VB12 tablets and multivitamin. Under the optimum conditions, the CL intensity of the system was increased with the concentration of VB12 in the range of 0.25-100 ng mL(-1) with the correlation coefficient of 0.9982. The limit of detection was found to be 0.04 ng mL(-1) with the relative standard deviation of 1.56 % for five replicate determinations of 25 ng mL(-1) of VB12. The CL reaction mechanism was demonstrated by UV-visible spectra and CL emission spectra.

A new luminol chemiluminescence sensor for glucose based on pH-dependent graphene oxide

In this study, graphene oxide (GO) was found to catalyze the luminol-O2 reaction, which yielded a novel chemiluminescence (CL). Remarkably, the CL emission could be tuned by modulating the pH of the GO dispersion. Transmission electron microscopy, CL spectra, electron spin resonance spectra studies were carried out to investigate the CL mechanism. The results indicate that the CL emission was attributed to the intrinsic catalytic effect of GO acting as the radical generation proliferators and electron transfer accelerators. Based on the GO catalyzed luminol-O2 system, we successfully developed a new CL sensor to detect glucose. Under the optimized conditions, glucose could be assayed in the range of 0.05 mM to 5 mM with a detection limit of 0.044 mM. For the detection of clinical serum samples, it is well consistent with the data determined by commercially available method in hospital, indicating that the new CL method provides a possible application for the detection of glucose in clinical diagnostics.

Chemiluminescent cholesterol sensor based on peroxidase-like activity of cupric oxide nanoparticles

A chemiluminescent cholesterol sensor with good selectivity and enhanced sensitivity was constructed based upon the peroxidase-like activity of cupric oxide nanoparticles. Cupric oxide nanoparticles can catalyze the oxidation of luminol by H2O2, which was produced by the reaction of cholesterol and oxygen that was catalyzed by cholesterol oxidase. Therefore, the oxidation of cholesterol could be transduced into the chemiluminescence of luminol by combining these two reactions. Under the optimum conditions, the CL intensity was proportional to the concentration of cholesterol over the range of 0.625-12.5μM and a detection limit was 0.17μM. The applicability of proposed method has been validated by determination of cholesterol in milk powder and human serum samples with satisfactory results.

Enhanced chemiluminescence of the luminol-hydrogen peroxide system by colloidal cupric oxide nanoparticles as peroxidase mimic

As a peroxidase mimic, cupric oxide nanoparticles were found to enhance the chemiluminescence (CL) of luminol-H(2)O(2) system up to 400 folds. The CL spectra and radical scavengers were conducted to investigate the possible CL enhancement mechanism. It was suggested that the enhanced CL could be attributed to the peroxidase-like activity of CuO nanoparticles, which effectively catalyzed the decomposition of hydrogen peroxide into hydroxyl radicals. The effects of the reactant concentrations and some organic compounds were also investigated. The proposed method could be used as a sensitive detection tool for hydrogen peroxide and glucose.

Prussian-blue-modified iron oxide magnetic nanoparticles as effective peroxidase-like catalysts to degrade methylene blue with H2O2

Prussian-blue (PB)-modified γ-Fe(2)O(3) magnetic nanoparticles (PBMNPs) were successfully synthesized based on electric interactions between negatively charged [Fe(CN)(6)](4-) and positively charged γ-Fe(2)O(3) nanoparticles. The in situ PB coating was generated by the coordinating reaction between the adsorbed [Fe(CN)(6)](4-) and the ferric ions on the surface of γ-Fe(2)O(3) NPs. The as-prepared PBMNPs were characterized by FT-IR, XRD, TEM, and used to remove organic pollutants from aqueous solution, namely, using methylene blue (MB) as model compound. The experimental results showed that the target compound could be removed efficiently from solution over a wide pH range from 3 to 10 in the presence of PBMNPs as peroxidase-like catalyst and H(2)O(2) as oxidant. Under optimal conditions, MB could be removed completely after 120 min of reaction at 298 K; the chemical oxygen demand (COD) removal efficiency and the total organic carbon (TOC) abatement efficiency were 53.6% and 35%, respectively. Furthermore, the PBMNPs catalysts showed high magnetization, temperature tolerance, long-term storage and operational stability, and they could be readily separated from solution by applying an external magnetic field. Finally, a possible reaction mechanism for MB degradation was also discussed.

Silver nanoparticle-initiated chemiluminescence reaction of luminol-AgNO3 and its analytical application

Ag(+) has been regarded as an inert chemiluminescent oxidant. In this work, it was found that in the presence of silver nanoparticles (AgNPs), AgNO(3) could react with luminol to produce strong chemiluminescence (CL). The AgNPs with smaller size could initiate stronger CL emission. To investigate the CL mechanism of the AgNPs-luminol-AgNO(3) system, the UV-visible spectra and the CL spectrum of the CL system were obtained. The CL reaction mechanism involving catalysis was proposed. Compared with the reported nanoparticles-luminol-H(2)O(2) CL system, the AgNPs-luminol-AgNO(3) CL system has the advantages of low background and good stability. Moreover, the new CL system was used in immunoassay for IgG.